1 <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
4 <META NAME="GENERATOR" CONTENT="SGML-Tools 1.0.9">
5 <TITLE>The DXSpider Installation and Administration Manual : The DXSpider command set</TITLE>
6 <LINK HREF="adminmanual-9.html" REL=previous>
7 <LINK HREF="adminmanual.html#toc10" REL=contents>
11 <A HREF="adminmanual-9.html">Previous</A>
12 <A HREF="adminmanual.html#toc10">Contents</A>
14 <H2><A NAME="s10">10. The DXSpider command set</A></H2>
16 <P>Below is a complete list of commands available from the cluster prompt.
17 Most maintenance tasks are automatic but there are some commands that are useful
18 for a sysop. These are listed below in alphabetical order. The number in
19 brackets following the command name is the permissions level needed to use
22 <H2><A NAME="ss10.1">10.1 accept/announce (0)</A>
25 <P><CODE><B>accept/announce [0-9] <pattern></B> Set an accept filter
26 line for announce</CODE>
28 <P>Create an 'accept this announce' line for a filter.
29 <P>An accept filter line means that if the announce matches this filter it is
30 passed onto the user. See HELP FILTERS for more info. Please read this
31 to understand how filters work - it will save a lot of grief later on.
32 <P>You can use any of the following things in this line:-
35 info <string> eg: iota or qsl
36 by <prefixes> eg: G,M,2
38 origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
39 origin_itu <numbers>
40 origin_zone <numbers>
45 wx 1 filter WX announces
46 dest <prefixes> eg: 6MUK,WDX (distros)
52 acc/ann 2 by_zone 14,15,16
53 (this could be all on one line: acc/ann dest 6MUK or by_zone 14,15,16)
60 <P>This filter would only allow announces that were posted buy UK stations.
61 You can use the tag 'all' to accept everything eg:
66 <P>but this probably for advanced users...
68 <H2><A NAME="ss10.2">10.2 accept/announce (extended for sysops) (8)</A>
71 <P><CODE><B>accept/announce <call> [input] [0-9]<pattern></B> Announce filter sysop version</CODE>
73 <P>This version allows a sysop to set a filter for a callsign as well as the
74 default for nodes and users eg:-
78 accept/ann input node_default by G,M,2
79 accept/ann user_default by G,M,2
82 <H2><A NAME="ss10.3">10.3 accept/spots (0)</A>
85 <P><CODE><B>accept/announce [0-9] <pattern></B> Set an accept filter line for spots</CODE>
87 <P>Create an 'accept this spot' line for a filter.
89 <P>An accept filter line means that if the spot matches this filter it is
90 passed onto the user. See HELP FILTERS for more info. Please read this
91 to understand how filters work - it will save a lot of grief later on.
92 <P>You can use any of the following things in this line:-
95 freq <range> eg: 0/30000 or hf or hf/cw or 6m,4m,2m
96 on <range> same as 'freq'
97 call <prefixes> eg: G,PA,HB9
98 info <string> eg: iota or qsl
100 call_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
101 call_itu <numbers>
102 call_zone <numbers>
107 channel <prefixes>
110 <P>For frequencies, you can use any of the band names defined in
111 SHOW/BANDS and you can use a subband name like: cw, rtty, data, ssb -
112 thus: hf/ssb. You can also just have a simple range like: 0/30000 -
113 this is more efficient than saying simply: freq HF (but don't get
114 too hung up about that)
119 acc/spot 2 on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
121 <P>You can use the tag 'all' to accept everything, eg:
126 <P>but this probably for advanced users...
128 <H2><A NAME="ss10.4">10.4 accept/spots (extended for sysops) (8)</A>
131 <P><CODE><B>accept/spots <call> [input] [0-9] <pattern></B> Spot filter sysop version</CODE>
133 <P>This version allows a sysop to set a filter for a callsign as well as the
134 default for nodes and users eg:-
137 accept/spot db0sue-7 1 by_zone 14,15,16
138 accept/spot node_default all
139 set/hops node_default 10
141 accept/spot user_default by G,M,2
144 <H2><A NAME="ss10.5">10.5 accept/wcy (0)</A>
147 <P><CODE><B>accept/wcy [0-9] <pattern></B> set an accept WCY filter</CODE>
149 <P>It is unlikely that you will want to do this, but if you do then you can
150 filter on the following fields:-
153 by <prefixes> eg: G,M,2
155 origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
156 origin_itu <numbers>
157 origin_zone <numbers>
161 channel <prefixes>
164 <P>There are no examples because WCY Broadcasts only come from one place and
165 you either want them or not (see UNSET/WCY if you don't want them).
166 <P>This command is really provided for future use.
167 <P>See HELP FILTER for information.
169 <H2><A NAME="ss10.6">10.6 accept/wcy (extended for sysops) (8)</A>
172 <P><CODE><B>accept/wcy <call> [input] [0-9] <pattern></B>
173 WCY filter sysop version</CODE>
175 <P>This version allows a sysop to set a filter for a callsign as well as the
176 default for nodes and users eg:-
179 accept/wcy node_default all
180 set/hops node_default 10
183 <H2><A NAME="ss10.7">10.7 accept/wwv (0)</A>
186 <P><CODE><B>accept/wwv [0-9] <pattern></B> Set an accept WWV filter</CODE>
188 <P>It is unlikely that you will want to do this, but if you do then you can
189 filter on the following fields:-
192 by <prefixes> eg: G,M,2
194 origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
195 origin_itu <numbers>
196 origin_zone <numbers>
200 channel <prefixes>
207 <P>is probably the only useful thing to do (which will only show WWV broadcasts
208 by stations in the US).
209 <P>See HELP FILTER for information.
211 <H2><A NAME="ss10.8">10.8 accept/wwv (extended for sysops) (8)</A>
214 <P><CODE><B>accept/wwv <call> [input] [0-9] <pattern></B>
215 WWV filter sysop version</CODE>
217 <P>This version allows a sysop to set a filter for a callsign as well as the
218 default for nodes and users eg:-
221 accept/wwv db0sue-7 1 by_zone 4
222 accept/wwv node_default all
223 set/hops node_default 10
225 accept/wwv user_default by W,K
228 <H2><A NAME="ss10.9">10.9 announce (0)</A>
231 <P><CODE><B>announce <text></B> Send an announcement to local users</CODE>
233 <P>Send an announcement to LOCAL users only, where <text> is the text
234 of the announcement you wish to broadcast
236 <H2><A NAME="ss10.10">10.10 announce full (0)</A>
239 <P><CODE><B>announce full <text></B> Send an announcement cluster wide</CODE>
241 <P>This command will send your announcement across the whole cluster
245 <H2><A NAME="ss10.11">10.11 announce sysop (5)</A>
248 <P><CODE><B>announce sysop <text></B></CODE>
250 <P>Send an announcement to Sysops only
252 <H2><A NAME="ss10.12">10.12 apropos (0)</A>
255 <P><CODE><B>apropos <string></B> Search the help database</CODE>
257 <P>Search the help database for <string> (it isn't case sensitive),
258 and print the names of all the commands that may be relevant.
260 <H2><A NAME="ss10.13">10.13 bye (0)</A>
263 <P><CODE><B>bye</B> Exit from the cluster</CODE>
265 <P>This will disconnect you from the cluster
267 <H2><A NAME="ss10.14">10.14 catchup (5)</A>
270 <P><CODE><B>catchup <node_call> All|[<msgno> ...]</B> Mark a message as sent</CODE>
272 <P>When you send messages the fact that you have forwarded it to another node
273 is remembered so that it isn't sent again. When you have a new partner
274 node and you add their callsign to your /spider/msg/forward.pl file, all
275 outstanding non-private messages will be forwarded to them. This may well
276 be ALL the non-private messages. You can prevent this by using these
281 catchup GB7DJK 300 301 302 303 500-510
283 <P>and to undo what you have just done:-
287 uncatchup GB7DJK 300 301 302 303 500-510
289 <P>which will arrange for them to be forward candidates again.
290 <P>Order is not important.
292 <H2><A NAME="ss10.15">10.15 clear/spots (0)</A>
295 <P><CODE><B>clear/spots [1|all]</B> Clear a spot filter line</CODE>
297 <P>This command allows you to clear (remove) a line in a spot filter or to
298 remove the whole filter.
299 <P>If you have a filter:-
303 acc/spot 2 on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
310 <P>you will be left with:-
313 acc/spot 2 on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
320 <P>the filter will be completely removed.
323 <H2><A NAME="ss10.16">10.16 connect (5) </A>
326 <P><CODE><B>connect <callsign></B> Start a connection to another DX Cluster</CODE>
328 <P>Start a connection process that will culminate in a new connection to the
329 DX cluster <callsign>. This process creates a new 'client' process which will
330 use the script in /spider/connect/<callsign> to effect the 'chat' exchange
331 necessary to traverse the network(s) to logon to the cluster <callsign>.
333 <H2><A NAME="ss10.17">10.17 dbavail (0)</A>
336 <P><CODE><B>dbavail</B> Show a list of all the databases in the system</CODE>
338 <P>The title says it all really, this command lists all the databases defined
339 in the system. It is also aliased to SHOW/COMMAND.
341 <H2><A NAME="ss10.18">10.18 dbcreate (9)</A>
344 <P><CODE><B>dbcreate <name></B> Create a database entry<BR>
345 <B>dbcreate <name> chain <name> [<name>..]</B> Create a chained database entry<BR>
346 <B>dbcreate <name> remote <node></B> Create a remote database
349 <P>DBCREATE allows you to define a database in the system. It doesn't actually
350 create anything, just defines it.
351 <P>The databases that are created are simple DB_File hash databases, they are
352 therefore already 'indexed'.
353 <P>You can define a local database with the first form of the command eg:
355 <P>You can also chain databases with the addition of the 'chain' keyword.
356 This will search each database one after the other. A typical example
358 <P>DBCREATE sdx_qsl chain sql_ad
359 <P>No checking is done to see if the any of the chained databases exist, in
360 fact it is usually better to do the above statement first then do each of
361 the chained databases.
362 <P>Databases can exist offsite. To define a database that lives on another
364 <P>DBCREATE buckmaster remote gb7dxc
365 <P>Remote databases cannot be chained; however, the last database in a
366 a chain can be a remote database eg:
367 <P>DBCREATE qsl chain gb7dxc
368 <P>To see what databases have been defined do:
369 <P>DBAVAIL (or it will have been aliased to SHOW/COMMAND)
370 <P>It would be normal for you to add an entry into your local Aliases file
371 to allow people to use the 'SHOW/<dbname>' style syntax. So you would
372 need to add a line like:-
379 '^sh\w*/buc', 'dbshow buckmaster', 'dbshow',
387 <P>to work as they may be used to.
388 <P>See DBIMPORT for the importing of existing AK1A format data to databases.
389 See DBSHOW for generic database enquiry
391 <H2><A NAME="ss10.19">10.19 dbimport (9)</A>
394 <P><CODE><B>dbimport <dbname></B> Import AK1A data into a database</CODE>
396 <P>If you want to import or update data in bulk to a database you can use
397 this command. It will either create or update entries into an existing
398 database. For example:-
399 <P>DBIMPORT oblast /tmp/OBLAST.FUL
400 <P>will import the standard OBLAST database that comes with AK1A into the
401 oblast database held locally.
403 <H2><A NAME="ss10.20">10.20 dbremove (9)</A>
406 <P><CODE><B>dbremove <dbname></B> Delete a database</CODE>
408 <P>DBREMOVE will completely remove a database entry and also delete any data
409 file that is associated with it.
410 <P>There is no warning, no comeback, no safety net.
413 <P>will remove the oblast database from the system and it will also remove
414 the associated datafile.
416 <P>There is no warning, no comeback, no safety net.
417 <P>You have been warned.
419 <H2><A NAME="ss10.21">10.21 dbshow (0)</A>
422 <P><CODE><B>dbshow <dbname> <key></B> Display an entry, if it exists, in a database</CODE>
424 <P>This is the generic user interface to the database to the database system.
425 It is expected that the sysop will add an entry to the local Aliases file
426 so that users can use the more familiar AK1A style of enquiry such as:
431 <P>but if he hasn't and the database really does exist (use DBAVAIL or
432 SHOW/COMMAND to find out) you can do the same thing with:
439 <H2><A NAME="ss10.22">10.22 debug (9)</A>
442 <P><CODE><B>debug</B> Set the cluster program into debug mode</CODE>
444 <P>Executing this command will only have an effect if you are running the cluster
452 <P>It will interrupt the cluster just after the debug command has finished.
454 <H2><A NAME="ss10.23">10.23 directory (0)</A>
457 <P><CODE><B>directory</B> List messages<BR> <B>directory all</B> List all messages<BR>
458 <B>directory own</B> List your own messages<BR>
459 <B>directory new</B> List all new messages<BR>
460 <B>directory to <call></B> List all messages to <call><BR>
461 <B>directory from <call></B> List all messages from <call><BR>
462 <B>directory subject <string></B> List all messages with <string> in subject<BR>
463 <B>directory <nn></B> List last <nn> messages<BR>
464 <B>directory <from>-<to></B> List messages <from> message <to> message <BR></CODE>
466 <P>List the messages in the messages directory.
467 <P>If there is a 'p' one space after the message number then it is a
468 personal message. If there is a '-' between the message number and the
469 'p' then this indicates that the message has been read.
470 <P>You can use shell escape characters such as '*' and '?' in the <call>
472 <P>You can combine some of the various directory commands together eg:-
477 DIR SUBJECT IOTA 200-250
479 <P>You can abbreviate all the commands to one letter and use ak1a syntax:-
487 <H2><A NAME="ss10.24">10.24 directory (extended for sysops) (5)</A>
490 <P>Works just like the user command except that sysops can see ALL messages.
492 <H2><A NAME="ss10.25">10.25 disconnect (8)</A>
495 <P><CODE><B>disconnect <call> [<call> ...]</B> Disconnect a user or node</CODE>
497 <P>Disconnect any <call> connected locally
499 <H2><A NAME="ss10.26">10.26 dx (0)</A>
502 <P><CODE><B>dx [by <call>] <freq> <call> <remarks></B> Send a DX spot</CODE>
504 <P>This is how you send a DX Spot to other users. You can, in fact, now
505 enter the <freq> and the <call> either way round.
512 <P>will all give the same result. You can add some remarks to the end
513 of the command and they will be added to the spot.
516 DX FR0G 144600 this is a test
518 <P>You can credit someone else by saying:-
521 DX by G1TLH FR0G 144.600 he isn't on the cluster
523 <P>The <freq> is compared against the available bands set up in the
524 cluster. See SHOW/BANDS for more information.
526 <H2><A NAME="ss10.27">10.27 export (9)</A>
529 <P><CODE><B>export <msgno> <filename></B> Export a message to a file</CODE>
531 <P>Export a message to a file. This command can only be executed on a local
532 console with a fully privileged user. The file produced will be in a form
533 ready to be imported back into the cluster by placing it in the import
534 directory (/spider/msg/import).
535 <P>This command cannot overwrite an existing file. This is to provide some
536 measure of security. Any files written will owned by the same user as the
537 main cluster, otherwise you can put the new files anywhere the cluster can
538 access. For example:-
539 <P>EXPORT 2345 /tmp/a
541 <H2><A NAME="ss10.28">10.28 export_users (9)</A>
544 <P><CODE><B>export_users [<filename>]</B> Export the users database to ascii</CODE>
546 <P>Export the users database to a file in ascii format. If no filename
547 is given then it will export the file to /spider/data/user_asc.
548 <P>If the file already exists it will be renamed to <filename>.o. In fact
549 up to 5 generations of the file can be kept each one with an extra 'o' on the
551 <P>BE WARNED: this will write to any file you have write access to. No check is
552 made on the filename (if any) that you specify.
554 <H2><A NAME="ss10.29">10.29 forward/opername (1)</A>
557 <P><CODE><B>forward/opername <call></B> Send out information on this <call> to all clusters</CODE>
559 <P>This command sends out any information held in the user file which can
560 be broadcast in PC41 protocol packets. This information is Name, QTH, Location
561 and Homenode. PC41s are only sent for the information that is available.
563 <H2><A NAME="ss10.30">10.30 help (0)</A>
566 <P><CODE><B>help <cmd></B> Get help on a command</CODE>
568 <P>All commands can be abbreviated, so SHOW/DX can be abbreviated
569 to SH/DX, ANNOUNCE can be shortened to AN and so on.
570 <P>Look at the APROPOS <string> command which will search the help database
571 for the <string> you specify and give you a list of likely commands
572 to look at with HELP.
574 <H2><A NAME="ss10.31">10.31 init (5)</A>
577 <P><CODE><B>init <node call></B> Re-initialise a link to an AK1A compatible node</CODE>
579 <P>This command attempts to re-initialise a link to a (usually) AK1A node
580 that has got confused, usually by a protocol loop of some kind. It may
581 work - but you usually will be better off simply disconnecting it (or
582 better, if it is a real AK1A node, doing an RCMD <node> DISC/F <your
584 <P>Best of luck - you will need it.
586 <H2><A NAME="ss10.32">10.32 kill (0)</A>
589 <P><CODE><B>kill <msgno> [<msgno> ..]</B> Delete a message from the local system</CODE>
591 <P>Delete a message from the local system. You will only be able to
592 delete messages that you have originated or been sent (unless you are
595 <H2><A NAME="ss10.33">10.33 kill (5)</A>
598 <P><CODE><B>kill <msgno> [<msgno> ...]</B> Remove or erase a message from the system<BR>
599 <B>kill from <call></B> Remove all messages from a callsign<BR>
600 <B>kill to <call></B> Remove all messages to a callsign<BR></CODE>
602 <P>You can get rid of any message to or originating from your callsign using
603 this command. You can remove more than one message at a time.
604 <P>As a sysop you can kill any message on the system.
606 <H2><A NAME="ss10.34">10.34 kill full (5)</A>
607 <CODE><B>kill full <msgno> [<msgno>]</B> Delete a message from the whole cluster</CODE></H2>
609 <P>Delete a message (usually a 'bulletin') from the whole cluster system.
610 <P>This uses the subject field, so any messages that have exactly the same subject
611 will be deleted. Beware!
613 <H2><A NAME="ss10.35">10.35 links (0)</A>
616 <P><CODE><B>links</B> Show which nodes are physically connected</CODE>
618 <P>This is a quick listing that shows which links are connected and
619 some information about them. See WHO for a list of all connections.
622 <H2><A NAME="ss10.36">10.36 load/aliases (9)</A>
625 <P><CODE><B>load/aliases</B> Reload the command alias table</CODE>
627 <P>Reload the /spider/cmd/Aliases file after you have editted it. You will need to
628 do this if you change this file whilst the cluster is running in order for the
629 changes to take effect.
632 <H2><A NAME="ss10.37">10.37 load/baddx (9)</A>
633 <CODE><B>load/baddx</B> Reload the bad DX table</CODE></H2>
635 <P>Reload the /spider/data/baddx.pl file if you have changed it manually whilst
636 the cluster is running. This table contains the DX Calls that, if spotted,
637 will not be passed on. FR0G and TEST are classic examples.
639 <H2><A NAME="ss10.38">10.38 load/badmsg (9)</A>
642 <P><CODE><B>load/badmsg</B> Reload the bad message table</CODE>
644 <P>Reload the /spider/msg/badmsg.pl file if you have changed it manually whilst
645 the cluster is running. This table contains a number of perl regular
646 expressions which are searched for in the fields targetted of each message.
647 If any of them match then that message is immediately deleted on receipt.
649 <H2><A NAME="ss10.39">10.39 load/badwords (9)</A>
652 <P><CODE><B>load/badwords</B> Reload the badwords file</CODE>
654 <P>Reload the /spider/data/badwords file if you have changed it manually whilst
655 the cluster is running. This file contains a list of words which, if found
656 on certain text portions of PC protocol, will cause those protocol frames
657 to be rejected. It will all put out a message if any of these words are
658 used on the announce, dx and talk commands. The words can be one or
659 more on a line, lines starting with '#' are ignored.
661 <H2><A NAME="ss10.40">10.40 load/bands (9)</A>
664 <P><CODE><B>load/bands</B> Reload the band limits table</CODE>
666 <P>Reload the /spider/data/bands.pl file if you have changed it manually whilst
667 the cluster is running.
669 <H2><A NAME="ss10.41">10.41 load/cmd_cache (9)</A>
672 <P><CODE><B>load/cmd_cache</B> Reload the automatic command cache</CODE>
674 <P>Normally, if you change a command file in the cmd or local_cmd tree it will
675 automatially be picked up by the cluster program. Sometimes it can get confused
676 if you are doing a lot of moving commands about or delete a command in the
677 local_cmd tree and want to use the normal one again. Execute this command to
678 reset everything back to the state it was just after a cluster restart.
680 <H2><A NAME="ss10.42">10.42 load/forward (9)</A>
683 <P><CODE><B>load/forward</B> Reload the msg forwarding routing table</CODE>
684 <P>Reload the /spider/msg/forward.pl file if you have changed it
685 manually whilst the cluster is running.
687 <H2><A NAME="ss10.43">10.43 load/messages (9)</A>
690 <P><CODE><B>load/messages</B> Reload the system messages file</CODE>
692 <P>If you change the /spider/perl/Messages file (usually whilst fiddling/writing ne
693 commands) you can have them take effect during a cluster session by executing this
694 command. You need to do this if get something like :-
695 <P>unknown message 'xxxx' in lang 'en'
697 <H2><A NAME="ss10.44">10.44 load/prefixes (9)</A>
700 <P><CODE><B>load/prefixes</B> Reload the prefix table</CODE>
702 <P>Reload the /spider/data/prefix_data.pl file if you have changed it manually
703 whilst the cluster is running.
705 <H2><A NAME="ss10.45">10.45 merge (5)</A>
708 <P><CODE><B>merge <node> [<no spots>/<no wwv>]</B> Ask for the latest spots and WWV</CODE>
710 <P>MERGE allows you to bring your spot and wwv database up to date. By default
711 it will request the last 10 spots and 5 WWVs from the node you select. The
712 node must be connected locally.
713 <P>You can request any number of spots or wwv and although they will be appended
714 to your databases they will not duplicate any that have recently been added
715 (the last 2 days for spots and last month for WWV data).
717 <H2><A NAME="ss10.46">10.46 msg (9)</A>
720 <P><CODE><B>msg <cmd> <msgno> [data ...]</B> Alter various message parameters</CODE>
722 <P>Alter message parameters like To, From, Subject, whether private or bulletin
723 or return receipt (RR) is required or whether to keep this message from timing
728 MSG TO <msgno> <call> - change TO callsign to <call>
729 MSG FRom <msgno> <call> - change FROM callsign to <call>
730 MSG PRrivate <msgno> - set private flag
731 MSG NOPRrivate <msgno> - unset private flag
732 MSG RR <msgno> - set RR flag
733 MSG NORR <msgno> - unset RR flag
734 MSG KEep <msgno> - set the keep flag (message won't be deleted ever)
735 MSG NOKEep <msgno> - unset the keep flag
736 MSG SUbject <msgno> <new> - change the subject to <new>
737 MSG WAittime <msgno> - remove any waitting time for this message
738 MSG NOREad <msgno> - mark message as unread
739 MSG REad <msgno> - mark message as read
740 MSG QUeue - queue any outstanding bulletins
741 MSG QUeue 1 - queue any outstanding private messages
744 <P>You can look at the status of a message by using:-
745 <P>STAT/MSG <msgno>
746 <P>This will display more information on the message than DIR does.
748 <H2><A NAME="ss10.47">10.47 pc (8)</A>
751 <P><CODE><B>pc <call> <text></B> Send text (eg PC Protocol) to <call></CODE>
753 <P>Send some arbitrary text to a locally connected callsign. No processing is done on
754 the text. This command allows you to send PC Protocol to unstick things if problems
755 arise (messages get stuck etc). eg:-
756 <P>pc gb7djk PC33^GB7TLH^GB7DJK^400^
757 <P>You can also use in the same way as a talk command to a connected user but
758 without any processing, added of "from <blah> to <blah>" or whatever.
759 <P>pc G1TLH Try doing that properly!!!
761 <H2><A NAME="ss10.48">10.48 ping (1)</A>
764 <P><CODE><B>ping <node></B> Send a ping command to another cluster node</CODE>
766 <P>This command is used to estimate the quality of the link to another cluster.
767 The time returned is the length of time taken for a PC51 to go to another
768 cluster and be returned.
769 <P>Any visible cluster node can be PINGed.
771 <H2><A NAME="ss10.49">10.49 rcmd (1)</A>
774 <P><CODE><B>rcmd <node call> <cmd></B> Send a command to another DX cluster</CODE>
776 <P>This command allows you to send nearly any command to another DX Cluster
777 node that is connected to the system.
778 <P>Whether you get any output is dependant on a) whether the other system knows
779 that the node callsign of this cluster is in fact a node b) whether the
780 other system is allowing RCMDs from this node and c) whether you have
781 permission to send this command at all.
783 <H2><A NAME="ss10.50">10.50 read (0)</A>
786 <P><CODE><B>read</B> Read the next unread personal message addressed to you<BR>
787 <B>read <msgno></B> Read the specified message<BR></CODE>
789 <P>You can read any messages that are sent as 'non-personal' and also any
790 message either sent by or sent to your callsign.
793 <H2><A NAME="ss10.51">10.51 read (extended for sysops) (5) </A>
796 <P><CODE><B>read <msgno></B> Read a message on the system</CODE>
798 <P>As a sysop you may read any message on the system
800 <H2><A NAME="ss10.52">10.52 reject/announce</A>
803 <P><CODE><B>reject/announce [0-9] <pattern></B> Set a reject filter
806 <P>Create an 'reject this announce' line for a filter.
807 <P>An reject filter line means that if the announce matches this filter it is
808 passed onto the user. See HELP FILTERS for more info. Please read this
809 to understand how filters work - it will save a lot of grief later on.
810 <P>You can use any of the following things in this line:-
813 info <string> eg: iota or qsl
814 by <prefixes> eg: G,M,2
816 origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
817 origin_itu <numbers>
818 origin_zone <numbers>
822 channel <prefixes>
823 wx 1 filter WX announces
824 dest <prefixes> eg: 6MUK,WDX (distros)
829 rej/ann by_zone 14,15,16 and not by G,M,2
831 <P>You can use the tag 'all' to reject everything eg:
836 <P>but this probably for advanced users...
838 <H2><A NAME="ss10.53">10.53 reject/announce (extended for sysops) (8)</A>
841 <P><CODE><B>reject/announce <call> [input] [0-9] <pattern></B> Announce filter sysop version</CODE>
843 <P>This version allows a sysop to set a filter for a callsign as well as the
844 default for nodes and users eg:-
848 reject/ann input node_default by G,M,2
849 reject/ann user_default by G,M,2
852 <H2><A NAME="ss10.54">10.54 reject/spots (0)</A>
855 <P><CODE><B>reject/spots [0-9] <pattern></B> Set a reject filter line for spots</CODE>
857 <P>Create an 'reject this spot' line for a filter.
858 <P>An reject filter line means that if the spot matches this filter it is
859 dumped (not passed on). See HELP FILTERS for more info. Please read this
860 to understand how filters work - it will save a lot of grief later on.
861 <P>You can use any of the following things in this line:-
864 freq <range> eg: 0/30000 or hf or hf/cw or 6m,4m,2m
865 on <range> same as 'freq'
866 call <prefixes> eg: G,PA,HB9
867 info <string> eg: iota or qsl
869 call_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
870 call_itu <numbers>
871 call_zone <numbers>
876 channel <prefixes>
878 <P>For frequencies, you can use any of the band names defined in
879 SHOW/BANDS and you can use a subband name like: cw, rtty, data, ssb -
880 thus: hf/ssb. You can also just have a simple range like: 0/30000 -
881 this is more efficient than saying simply: on HF (but don't get
882 too hung up about that)
887 rej/spot 2 on vhf and not (by_zone 14,15,16 or call_zone 14,15,16)
889 <P>You can use the tag 'all' to reject everything eg:
894 <P>but this probably for advanced users...
896 <H2><A NAME="ss10.55">10.55 reject/spots (extended for sysops) (8)</A>
899 <P><CODE><B>reject/spots <call> [input] [0-9] <pattern></B>
900 Reject spot filter sysop version </CODE>
902 <P>This version allows a sysop to set a filter for a callsign as well as the
903 default for nodes and users eg:-
906 reject/spot db0sue-7 1 by_zone 14,15,16
907 reject/spot node_default all
908 set/hops node_default 10
910 reject/spot user_default by G,M,2
913 <H2><A NAME="ss10.56">10.56 reject/wcy (0)</A>
916 <P><CODE><B>reject/wcy [0-9] <pattern></B> Set a reject WCY filter</CODE>
918 <P>It is unlikely that you will want to do this, but if you do then you can
919 filter on the following fields:-
922 by <prefixes> eg: G,M,2
924 origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
925 origin_itu <numbers>
926 origin_zone <numbers>
930 channel <prefixes>
932 <P>There are no examples because WCY Broadcasts only come from one place and
933 you either want them or not (see UNSET/WCY if you don't want them).
934 <P>This command is really provided for future use.
935 <P>See HELP FILTER for information.
937 <H2><A NAME="ss10.57">10.57 reject/wcy (extended for sysops) (8)</A>
940 <P><CODE><B>reject/wcy <call> [input] [0-9] <pattern></B>
941 WCY reject filter sysop version</CODE>
943 <P>This version allows a sysop to set a filter for a callsign as well as the
944 default for nodes and users eg:-
945 <P>reject/wcy gb7djk all
947 <H2><A NAME="ss10.58">10.58 reject/wwv (0)</A>
950 <P><CODE><B>reject/wwv [0-9] <pattern></B> Set a reject WWV filter</CODE>
952 <P>It is unlikely that you will want to do this, but if you do then you can
953 filter on the following fields:-
956 by <prefixes> eg: G,M,2
958 origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
959 origin_itu <numbers>
960 origin_zone <numbers>
964 channel <prefixes>
969 reject/wwv by_zone 14,15,16
971 <P>is probably the only useful thing to do (which will only show WWV broadcasts
972 by stations in the US).
973 <P>See HELP FILTER for information.
975 <H2><A NAME="ss10.59">10.59 reject/wwv (extended for sysops) (8)</A>
978 <P><CODE><B>reject/wwv <call> [input] [0-9] <pattern></B>
979 WWV reject filter sysop version</CODE>
981 <P>This version allows a sysop to set a filter for a callsign as well as the
982 default for nodes and users eg:-
985 reject/wwv db0sue-7 1 by_zone 4
986 reject/wwv node_default all
988 reject/wwv user_default by W
991 <H2><A NAME="ss10.60">10.60 reply (0)</A>
994 <P><CODE><B>reply</B> Reply (privately) to the last message that you have read<BR>
995 <B>reply <msgno></B> Reply (privately) to the specified message<BR>
996 <B>reply B <msgno></B> Reply as a Bulletin to the specified message<BR>
997 <B>reply NOPrivate <msgno></B> Reply as a Bulletin to the specified
999 <B>reply RR <msgno></B> Reply to the specified message with read receipt<BR></CODE>
1001 <P>You can reply to a message and the subject will automatically have
1002 "Re:" inserted in front of it, if it isn't already present.
1003 <P>You can also use all the extra qualifiers such as RR, PRIVATE,
1004 NOPRIVATE, B that you can use with the SEND command (see SEND
1005 for further details)
1007 <H2><A NAME="ss10.61">10.61 send (0)</A>
1010 <P><CODE><B>send <call> [<call> ...]</B> Send a message to one or more callsigns<BR>
1011 <B>send RR <call></B> Send a message and ask for a read receipt<BR>
1012 <B>send COPY <msgno> <call></B> Send a copy of a message to someone<BR>
1013 <B>send PRIVATE <call></B> Send a personal message<BR>
1014 <B>send NOPRIVATE <call></B> Send a message to all stations<BR></CODE>
1016 <P>All the SEND commands will create a message which will be sent either to
1017 an individual callsign or to one of the 'bulletin' addresses.
1018 <P>SEND <call> on its own acts as though you had typed SEND PRIVATE, that is
1019 it will mark the message as personal and send it to the cluster node that
1020 that callsign is connected to.
1021 <P>You can have more than one callsign in all of the SEND commands.
1022 <P>You can have multiple qualifiers so that you can have for example:-
1025 SEND RR COPY 123 PRIVATE G1TLH G0RDI
1027 <P>which should send a copy of message 123 to G1TLH and G0RDI and you will
1028 receive a read receipt when they have read the message.
1029 <P>SB is an alias for SEND NOPRIVATE (or send a bulletin in BBS speak)
1030 SP is an alias for SEND PRIVATE
1032 <H2><A NAME="ss10.62">10.62 set/address (0)</A>
1035 <P><CODE><B>set/address <your_address></B> Record your postal address</CODE>
1037 <P>Literally, record your address details on the cluster.
1039 <H2><A NAME="ss10.63">10.63 set/announce (0)</A>
1042 <P><CODE><B>set/announce</B> Allow announce messages</CODE>
1044 <P>Allow announce messages to arrive at your terminal.
1046 <H2><A NAME="ss10.64">10.64 set/arcluster (5)</A>
1049 <P><CODE><B>set/arcluster <node_call> [<node_call> ...]</B> Make
1050 the node_call an AR-Cluster type node</CODE>
1052 <P>Set the node_call as an AR-Cluster type node
1054 <H2><A NAME="ss10.65">10.65 set/badnode (6)</A>
1057 <P><CODE><B>set/badnode <node_call></B> Stop spots from this node_call
1058 being propagated</CODE>
1060 <P>Setting a callsign as a 'badnode' will prevent spots from that node
1061 going any further. They will not be displayed and they will not be
1062 sent onto other nodes.
1063 <P>The call can be a full or partial call (or a prefix), eg:-
1068 <P>will stop anything from K1TTT (including any SSID's)
1073 <P>will allow spots from him again.
1074 <P>Use with extreme care. This command may well be superceded by FILTERing.
1076 <H2><A NAME="ss10.66">10.66 set/beep (0)</A>
1079 <P><CODE><B>set/beep</B> Add beeps to terminal messages</CODE>
1081 <P>Add a beep to DX and other terminal messages.
1083 <H2><A NAME="ss10.67">10.67 set/clx (5)</A>
1086 <P><CODE><B>set/clx <node_call> [<node_call> ...]</B> Make
1087 the node_call a CLX type node</CODE>
1089 <P>Set the node_call as a CLX type node
1091 <H2><A NAME="ss10.68">10.68 set/debug (9)</A>
1094 <P><CODE><B>set/debug <name></B> Add a debug level to the debug set</CODE>
1096 <P>You can remove this level with unset/debug <name>
1098 <H2><A NAME="ss10.69">10.69 set/dx (0)</A>
1101 <P><CODE><B>set/dx</B>Allow DX messages to arrive at your terminal</CODE>
1103 <P>You can stop DX messages with the <EM>unset/dx</EM> command
1105 <H2><A NAME="ss10.70">10.70 set/dxgrid (0)</A>
1108 <P><CODE><B>set/dxgrid</B>Allow grid squares on the end of DX messages</CODE>
1110 <P>Some logging programs do not like the additional information at
1111 the end of a DX spot. If this is the case, use the <EM>unset/dxgrid</EM>
1112 command to remove the grid squares.
1114 <H2><A NAME="ss10.71">10.71 set/dxnet (5)</A>
1117 <P><CODE><B>set/dxnet <node_call> [<node_call> ...]</B> Make
1118 the node_call a DXNet type node</CODE>
1120 <P>Set the node_call as a DXNet type node
1122 <H2><A NAME="ss10.72">10.72 set/echo (0)</A>
1125 <P><CODE><B>set/echo</B> Make the cluster echo your input</CODE>
1127 <P>If you are connected via a telnet session, different implimentations
1128 of telnet handle echo differently depending on whether you are
1129 connected via port 23 or some other port. You can use this command
1130 to change the setting appropriately.
1131 <P>You can remove the echo with the <EM>unset/echo</EM> command
1132 <P>The setting is stored in your user profile.
1133 <P>YOU DO NOT NEED TO USE THIS COMMAND IF YOU ARE CONNECTED VIA AX25.
1135 <H2><A NAME="ss10.73">10.73 set/here (0)</A>
1138 <P><CODE><B>set/here</B> Set the here flag</CODE>
1140 <P>Let others on the cluster know you are here by only displaying your
1141 callsign. If you are away from your terminal you can use the <EM>unset/here</EM>
1142 command to let people know you are away. This simply puts brackets
1143 around your callsign to indicate you are not available.
1145 <H2><A NAME="ss10.74">10.74 set/homenode (0)</A>
1148 <P><CODE><B>set/homenode <node_call></B> Set your home cluster</CODE>
1150 <P>Tell the cluster system where you normally connect to. Any Messages sent
1151 to you will normally find their way there should you not be connected.
1158 <H2><A NAME="ss10.75">10.75 set/hops (8)</A>
1161 <P><CODE><B>set/hops <node_call> ann|spots|wwv|wcy <n></B>
1162 Set hop count</CODE>
1164 <P>Set the hop count for a particular type of broadcast for a node.
1165 <P>This command allows you to set up special hop counts for a node
1166 for currently: announce, spots, wwv and wcy broadcasts.
1170 set/hops gb7djk ann 10
1171 set/hops gb7mbc spots 20
1173 <P>Set SHOW/HOPS for information on what is already set. This command
1174 creates a filter and works in conjunction with the filter system.
1176 <H2><A NAME="ss10.76">10.76 set/isolate (9)</A>
1179 <P><CODE><B>set/isolate <node call></B> Isolate a node from the rest of the network</CODE>
1181 <P>Connect a node to your system in such a way that you are a full protocol
1182 member of its network and can see all spots on it, but nothing either leaks
1183 out from it nor goes back into from the rest of the nodes connected to you.
1184 <P>You can potentially connect several nodes in this way.
1185 <P>You can see which nodes are isolated with the show/isolate (1) command.
1186 <P>You can remove the isolation with the command unset/isolate.
1188 <H2><A NAME="ss10.77">10.77 set/language (0)</A>
1191 <P><CODE><B>set/language <language></B> Set the language you wish to use</CODE>
1193 <P>You can select the language that you want the cluster to use. Currently
1194 the languages available are <EM>en</EM> (English) and <EM>nl</EM> (Dutch).
1196 <H2><A NAME="ss10.78">10.78 set/location (0)</A>
1199 <P><CODE><B>set/location <lat and long></B> Set your latitude and longitude</CODE>
1201 <P>You can set your latitude and longitude manually or alternatively use the
1202 <EM>set/qra</EM> command which will do the conversion for you.
1205 set/location 54 04 N 2 02 E
1209 <H2><A NAME="ss10.79">10.79 set/sys_location (9)</A>
1212 <P><CODE><B>set/sys_location <lat & long></B> Set your cluster latitude and longitude</CODE>
1214 <P>In order to get accurate headings and such like you must tell the system
1215 what your latitude and longitude is. If you have not yet done a SET/QRA
1216 then this command will set your QRA locator for you. For example:-
1219 SET/LOCATION 52 22 N 0 57 E
1222 <H2><A NAME="ss10.80">10.80 set/logininfo (0)</A>
1225 <P><CODE><B>set/logininfo</B> Show logins and logouts of nodes and users</CODE>
1227 <P>Show users and nodes when they log in and out of the local cluster. You
1228 can stop these messages by using the <EM>unset/logininfo</EM> command.
1231 <H2><A NAME="ss10.81">10.81 set/lockout (9)</A>
1234 <P><CODE><B>set/lockout <call></B> Stop a callsign connecting to the cluster</CODE>
1236 <P>You can show who is locked out with the <EM>show/lockout</EM> command.
1237 To allow the user to connect again, use the <EM>unset/lockout</EM> command.
1239 <H2><A NAME="ss10.82">10.82 set/name (0)</A>
1242 <P><CODE><B>set/name <your_name></B> Set your name</CODE>
1244 <P>Tell the cluster what your name is, eg:-
1250 <H2><A NAME="ss10.83">10.83 set/node (9)</A>
1253 <P><CODE><B>set/node <call> [<call> ...]</B> Make the callsign an AK1A cluster</CODE>
1255 <P>Tell the system that the call(s) are to be treated as AK1A cluster and
1256 fed PC Protocol rather normal user commands.
1257 <P>From version 1.41 you can also set the following types of cluster
1265 <P>To see what your nodes are set to, use the <EM>show/nodes</EM> command.
1267 <H2><A NAME="ss10.84">10.84 set/obscount (9)</A>
1270 <P><CODE><B>set/obscount <count> <node call></B> Set the 'pump-up' obsolescence counter</CODE>
1272 <P>From version 1.35 onwards neighbouring nodes are pinged at regular intervals (see
1273 SET/PINGINTERVAL), usually 300 seconds or 5 minutes. There is a 'pump-up'
1274 counter which is decremented on every outgoing ping and then reset to
1275 the 'obscount' value on every incoming ping. The default value of this
1277 <P>What this means is that a neighbouring node will be pinged twice at
1278 (default) 300 second intervals and if no reply has been heard just before
1279 what would be the third attempt, that node is disconnected.
1280 <P>If a ping is heard then the obscount is reset to the full value. Using
1281 default values, if a node has not responded to a ping within 15 minutes,
1284 <H2><A NAME="ss10.85">10.85 set/page (0)</A>
1287 <P><CODE><B>set/page <n></B> Set the number of lines per page</CODE>
1289 <P>Tell the system how many lines you wish on a page when the number of lines
1290 of output from a command is more than this. The default is 20. Setting it
1291 explicitly to 0 will disable paging.
1297 <P>The setting is stored in your user profile.
1300 <H2><A NAME="ss10.86">10.86 set/password (9)</A>
1303 <P><CODE><B>set/password <callsign> <string></B> Set a users password</CODE>
1305 <P>The password for a user can only be set by a full sysop. The string
1306 can contain any characters but any spaces are removed (you can type in
1307 spaces - but they won't appear in the password). You can see the
1308 result with STAT/USER. The password is the usual 30 character baycom
1311 <H2><A NAME="ss10.87">10.87 set/pinginterval (9)</A>
1314 <P><CODE><B>set/pinginterval <time> <node call></B> Set the ping time to neighbouring nodes</CODE>
1316 <P>As from version 1.35 all neighbouring nodes are pinged at regular intervals
1317 in order to determine the rolling quality of the link and, in future, to
1318 affect routing decisions. The default interval is 300 secs or 5 minutes.
1319 <P>You can use this command to set a different interval. Please don't.
1320 <P>But if you do the value you enter is treated as minutes up 60 and seconds
1321 for numbers greater than that.
1322 <P>This is used also to help determine when a link is down at the far end
1323 (as certain cluster software doesn't always notice), see SET/OBSCOUNT
1324 for more information.
1326 <H2><A NAME="ss10.88">10.88 set/privilege (9)</A>
1329 <P><CODE><B>set/privilege <n> <call> [<call> ...]</B> Set the privilege level on a call</CODE>
1331 <P>Set the privilege level on a callsign. The privilege levels that pertain
1332 to commands are as default:-
1337 1 - allow remote nodes normal user RCMDs
1338 5 - various privileged commands (including shutdown, but not disc-
1339 connect), the normal level for another node.
1340 8 - more privileged commands (including disconnect)
1341 9 - local sysop privilege. DO NOT SET ANY REMOTE USER OR NODE TO THIS
1344 </CODE></BLOCKQUOTE>
1345 <P>If you are a sysop and you come in as a normal user on a remote connection
1346 your privilege will automatically be set to 0.
1348 <H2><A NAME="ss10.89">10.89 set/spider (5)</A>
1351 <P><CODE><B>set/spider <node_call> [<node_call> ...]</B> Make
1352 the node_call a DXSpider type node</CODE>
1354 <P>Set the node_call as a DXSpider type node
1356 <H2><A NAME="ss10.90">10.90 set/sys_qra (9)</A>
1359 <P><CODE><B>set/sys_qra <locator></B> Set your cluster QRA locator</CODE>
1361 <H2><A NAME="ss10.91">10.91 set/qra (0)</A>
1364 <P><CODE><B>set/qra <locator></B> Set your QRA locator</CODE>
1366 <P>Tell the system what your QRA (or Maidenhead) locator is. If you have not
1367 done a SET/LOCATION then your latitude and longitude will be set roughly
1368 correctly (assuming your locator is correct ;-). For example:-
1374 <H2><A NAME="ss10.92">10.92 set/qth (0)</A>
1377 <P><CODE><B>set/qth <your QTH></B> Set your QTH</CODE>
1379 <P>Tell the system where your are. For example:-
1382 set/qth East Dereham, Norfolk
1385 <H2><A NAME="ss10.93">10.93 set/talk (0)</A>
1388 <P><CODE><B>set/talk</B> Allow talk messages to be seen at your console</CODE>
1390 <P>Allow talk messages to arrive at your console. You can switch off
1391 talks with the <EM>unset/talk</EM> command.
1393 <H2><A NAME="ss10.94">10.94 set/wcy (0)</A>
1396 <P><CODE><B>set/wcy</B> Allow WCY messages to be seen at your console</CODE>
1398 <P>Allow WCY information to be seen at your console. You can switch off
1399 WCY messages with the <EM>unset/wcy</EM> command.
1401 <H2><A NAME="ss10.95">10.95 set/wwv (0)</A>
1404 <P><CODE><B>set/wwv</B> Allow WWV messages to be seen at your console</CODE>
1406 <P>Allow WWV information to be seen at your console. You can switch off
1407 WWV messages with the <EM>unset/wwv</EM> command.
1409 <H2><A NAME="ss10.96">10.96 set/wx (0)</A>
1412 <P><CODE><B>set/wx</B> Allow WX messages to be seen at your console</CODE>
1414 <P>Allow WX information to be seen at your console. You can switch off
1415 WX messages with the <EM>unset/wx</EM> command.
1417 <H2><A NAME="ss10.97">10.97 show/badnode (6)</A>
1420 <P><CODE><B>show/badnode</B> Show all the bad nodes in the system</CODE>
1422 <P>Display all the bad node callsigns in the system, see SET/BADNODE
1423 for more information.
1425 <H2><A NAME="ss10.98">10.98 show/date (0)</A>
1428 <P><CODE><B>show/date [<prefix>|<callsign>]</B> Show
1429 the local time</CODE>
1431 <P>This is very nearly the same as SHOW/TIME, the only difference the format
1432 of the date string if no arguments are given.
1433 <P>If no prefixes or callsigns are given then this command returns the local
1434 time and UTC as the computer has it right now. If you give some prefixes
1435 then it will show UTC and UTC + the local offset (not including DST) at
1436 the prefixes or callsigns that you specify.
1438 <H2><A NAME="ss10.99">10.99 show/dx (0)</A>
1441 <P><CODE><B>show/dx [options]</B> interrogate the spot database</CODE>
1443 <P>If you just type SHOW/DX you will get the last so many spots
1444 (sysop configurable, but usually 10).
1445 <P>In addition you can add any number of these options in very nearly
1446 any order to the basic SHOW/DX command, they are:-
1450 on <band> - eg 160m 20m 2m 23cm 6mm
1451 on <region> - eg hf vhf uhf shf (see SHOW/BANDS)
1453 <number> - the number of spots you want
1454 <from>-<to> - <from> spot no <to> spot no in
1457 <prefix> - for a spotted callsign beginning with <prefix>
1458 *<suffix> - for a spotted callsign ending in <suffix>
1459 *<string>* - for a spotted callsign containing <string>
1461 day <number> - starting <number> days ago
1462 day <from>-<to> - <from> days <to> days ago
1464 info <text> - any spots containing <text> in the info or remarks
1466 by <call> - any spots spotted by <call> (spotter <call>
1469 qsl - this automatically looks for any qsl info on the call
1470 held in the spot database.
1472 iota [<iota>] - If the iota island number is missing it will
1473 look for the string iota and anything which looks like
1474 an iota island number. If you specify then it will look
1477 qra [<locator>] - this will look for the specific locator if
1478 you specify one or else anything that looks like a locator.
1485 SH/DX on 20m info iota
1486 SH/DX 9a on vhf day 30
1493 <H2><A NAME="ss10.100">10.100 show/dxcc (0)</A>
1496 <P><CODE><B>show/dxcc <prefix></B> Interrogate the spot database by country</CODE>
1498 <P>This command takes the <prefix> (which can be a full or partial
1499 callsign if desired), looks up which internal country number it is
1500 and then displays all the spots as per SH/DX for that country.
1501 <P>The options for SHOW/DX also apply to this command.
1507 SH/DXCC W on 20m info iota
1510 <H2><A NAME="ss10.101">10.101 show/files (0)</A>
1513 <P><CODE><B>show/files [<filearea> [<string>]]</B> List
1514 the contents of a filearea</CODE>
1516 <P>SHOW/FILES on its own will show you a list of the various fileareas
1517 available on the system. To see the contents of a particular file
1521 SH/FILES <filearea>
1523 <P>where <filearea> is the name of the filearea you want to see the
1525 <P>You can also use shell globbing characters like '*' and '?' in a
1526 string to see a selection of files in a filearea eg:-
1529 SH/FILES bulletins arld*
1531 <P>See also TYPE - to see the contents of a file.
1533 <H2><A NAME="ss10.102">10.102 show/filter (0)</A>
1536 <P><CODE><B>show/filter</B> Show the filters you have set</CODE>
1538 <P>Show the contents of all the filters that are set by you. This command
1539 displays all the filters set - for all the various categories.
1541 <H2><A NAME="ss10.103">10.103 show/filter (extended for sysops) (5)</A>
1544 <P><CODE><B>show/filter <callsign></B> Show the filters set by <callsign></CODE>
1546 <P>A sysop can look at any filters that have been set.
1548 <H2><A NAME="ss10.104">10.104 show/hops (8)</A>
1551 <P><CODE><B>show/hops <node_call> [ann|spots|wcy|wwv|]</B> Show the hop counts for a node</CODE>
1553 <P>This command shows the hop counts set up for a node. You can specify
1554 which category you want to see. If you leave the category out then
1555 all the categories will be listed.
1557 <H2><A NAME="ss10.105">10.105 show/isolate (1)</A>
1560 <P><CODE><B>show/isolate</B> Show a list of isolated nodes</CODE>
1562 <P>Show which nodes are currently set to be isolated.
1564 <H2><A NAME="ss10.106">10.106 show/lockout (9)</A>
1567 <P><CODE><B>show/lockout</B> Show a list of excluded callsigns</CODE>
1569 <P>Show a list of callsigns that have been excluded (locked out) of the
1570 cluster locally with the <EM>set/lockout</EM> command
1572 <H2><A NAME="ss10.107">10.107 show/moon (0)</A>
1575 <P><CODE><B>show/moon [<prefix>|<callsign>]</B> Show moon
1576 rise and set times</CODE>
1578 <P>Show the Moon rise and set times for a (list of) prefixes or callsigns,
1579 together with the azimuth and elevation of the sun currently at those
1581 <P>If you don't specify any prefixes or callsigns, it will show the times for
1582 your QTH (assuming you have set it with either SET/LOCATION or SET/QRA),
1583 together with the current azimuth and elevation.
1584 <P>In addition, it will show the gain or loss dB relative to the nominal
1585 distance of 385,000Km due to the ellipsoidal nature of the orbit.
1586 <P>If all else fails it will show the Moonrise and set times for the node
1587 that you are connected to.
1595 <H2><A NAME="ss10.108">10.108 show/muf (0)</A>
1598 <P><CODE><B>show/muf <prefix> [<hours>][long]</B> Show
1599 the likely propagation to <prefix></CODE>
1601 <P>This command allow you to estimate the likelihood of you contacting
1602 a station with the prefix you have specified. The output assumes a modest
1603 power of 20dBW and receiver sensitivity of -123dBm (about 0.15muV/10dB SINAD)
1604 <P>The result predicts the most likely operating frequencies and signal
1605 levels for high frequency (shortwave) radio propagation paths on
1606 specified days of the year and hours of the day. It is most useful for
1607 paths between 250 km and 6000 km, but can be used with reduced accuracy
1608 for paths shorter or longer than this.
1609 <P>The command uses a routine MINIMUF 3.5 developed by the U.S. Navy and
1610 used to predict the MUF given the predicted flux, day of the year,
1611 hour of the day and geographic coordinates of the transmitter and
1612 receiver. This routine is reasonably accurate for the purposes here,
1613 with a claimed RMS error of 3.8 MHz, but much smaller and less complex
1614 than the programs used by major shortwave broadcasting organizations,
1615 such as the Voice of America.
1616 <P>The command will display some header information detailing its
1617 assumptions, together with the locations, latitude and longitudes and
1618 bearings. It will then show UTC (UT), local time at the other end
1619 (LT), calculate the MUFs, Sun zenith angle at the midpoint of the path
1620 (Zen) and the likely signal strengths. Then for each frequency for which
1621 the system thinks there is a likelihood of a circuit it prints a value.
1622 <P>The value is currently a likely S meter reading based on the conventional
1623 6dB / S point scale. If the value has a '+' appended it means that it is
1624 1/2 an S point stronger. If the value is preceeded by an 'm' it means that
1625 there is likely to be much fading and by an 's' that the signal is likely
1627 <P>By default SHOW/MUF will show the next two hours worth of data. You
1628 can specify anything up to 24 hours worth of data by appending the no of
1629 hours required after the prefix. For example:-
1637 RxSens: -123 dBM SFI: 159 R: 193 Month: 10 Day: 21
1638 Power : 20 dBW Distance: 6283 km Delay: 22.4 ms
1639 Location Lat / Long Azim
1640 East Dereham, Norfolk 52 41 N 0 57 E 47
1641 United-States-W 43 0 N 87 54 W 299
1642 UT LT MUF Zen 1.8 3.5 7.0 10.1 14.0 18.1 21.0 24.9 28.0 50.0
1643 18 23 11.5 -35 mS0+ mS2 S3
1644 19 0 11.2 -41 mS0+ mS2 S3
1646 <P>indicating that you will have weak, fading circuits on top band and
1647 80m but usable signals on 40m (about S3).
1653 <P>will get you the above display, but with the next 24 hours worth of
1660 <P>Gives you an estimate of the long path propagation characterics. It
1661 should be noted that the figures will probably not be very useful, nor
1662 terrible accurate, but it is included for completeness.
1664 <H2><A NAME="ss10.109">10.109 show/node (1)</A>
1667 <P><CODE><B>show/node [<node_call> ...]</B> Show the type and version
1668 number of nodes</CODE>
1670 <P>Show the type and version (if connected) of the nodes specified on the
1671 command line. If no callsigns are specified then a sorted list of all
1672 the non-user callsigns known to the system will be displayed.
1674 <H2><A NAME="ss10.110">10.110 show/prefix (0)</A>
1677 <P><CODE><B>show/prefix <callsign></B> Interrogate the prefix database</CODE>
1679 <P>This command takes the <callsign> (which can be a full or partial
1680 callsign or a prefix), looks up which internal country number
1681 it is and then displays all the relevant prefixes for that country
1682 together with the internal country no, the CQ and ITU regions.
1683 <P>See also SHOW/DXCC
1686 <H2><A NAME="ss10.111">10.111 show/program (5)</A>
1689 <P><CODE><B>show/program</B> Show the locations of all the included program modules</CODE>
1691 <P>Show the name and location where every program module was load from. This
1692 is useful for checking where you think you have loaded a .pm file from.
1694 <H2><A NAME="ss10.112">10.112 show/qra (0)</A>
1697 <P><CODE><B>show/qra <locator> [<locator>]</B> Show the distance
1698 between locators<BR>
1699 <B>show/qra <lat> <long></B> Convert latitude and longitude to a locator</CODE>
1701 <P>This is a multipurpose command that allows you either to calculate the
1702 distance and bearing between two locators or (if only one locator is
1703 given on the command line) the distance and beraing from your station
1704 to the locator. For example:-
1710 <P>The first example will show the distance and bearing to the locator from
1711 yourself, the second example will calculate the distance and bearing from
1712 the first locator to the second. You can use 4 or 6 character locators.
1713 <P>It is also possible to convert a latitude and longitude to a locator by
1714 using this command with a latitude and longitude as an argument, for
1718 SH/QRA 52 41 N 0 58 E
1721 <H2><A NAME="ss10.113">10.113 show/qrz (0)</A>
1724 <P><CODE><B>show/qrz <callsign></B> Show any callbook details on a callsign</CODE>
1726 <P>This command queries the QRZ callbook server on the internet
1727 and returns any information available for that callsign. This service
1728 is provided for users of this software by http://www.qrz.com
1730 <H2><A NAME="ss10.114">10.114 show/satellite (0)</A>
1733 <P><CODE><B>show/satellite <name> [<hours> <interval>]</B>
1734 Show satellite tracking data</CODE>
1736 <P>Show the tracking data from your location to the satellite of your choice
1737 from now on for the next few hours.
1738 <P>If you use this command without a satellite name it will display a list
1739 of all the satellites known currently to the system.
1740 <P>If you give a name then you can obtain tracking data of all the passes
1741 that start and finish 5 degrees below the horizon. As default it will
1742 give information for the next three hours for every five minute period.
1743 <P>You can alter the number of hours and the step size, within certain
1745 <P>Each pass in a period is separated with a row of '-----' characters
1750 SH/SAT FENGYUN1 12 2
1753 <H2><A NAME="ss10.115">10.115 show/sun (0)</A>
1756 <P><CODE><B>show/sun [<prefix>|<callsign>]</B> Show
1757 sun rise and set times</CODE>
1759 <P>Show the sun rise and set times for a (list of) prefixes or callsigns,
1760 together with the azimuth and elevation of the sun currently at those
1762 <P>If you don't specify any prefixes or callsigns, it will show the times for
1763 your QTH (assuming you have set it with either SET/LOCATION or SET/QRA),
1764 together with the current azimuth and elevation.
1765 <P>If all else fails it will show the sunrise and set times for the node
1766 that you are connected to.
1771 SH/SUN G1TLH K9CW ZS
1774 <H2><A NAME="ss10.116">10.116 show/time (0)</A>
1777 <P><CODE><B>show/time [<prefix>|<callsign>]</B> Show
1778 the local time</CODE>
1780 <P>If no prefixes or callsigns are given then this command returns the local
1781 time and UTC as the computer has it right now. If you give some prefixes
1782 then it will show UTC and UTC + the local offset (not including DST) at
1783 the prefixes or callsigns that you specify.
1785 <H2><A NAME="ss10.117">10.117 show/wcy (0)</A>
1788 <P><CODE><B>show/wcy</B> Show the last 10 WCY broadcasts<BR>
1789 <B>show/wcy <n></B> Show the last <n> WCY broadcasts</CODE>
1791 <P>Display the most recent WCY information that has been received by the system
1793 <H2><A NAME="ss10.118">10.118 show/wwv (0)</A>
1796 <P><CODE><B>show/wwv</B> Show the last 10 WWV broadcasts<BR>
1797 <B>show/wwv <n></B> Show the last <n> WWV broadcasts</CODE>
1799 <P>Display the most recent WWV information that has been received by the system
1802 <H2><A NAME="ss10.119">10.119 shutdown (5)</A>
1805 <P><CODE><B>shutdown</B> Shutdown the cluster</CODE>
1807 <P>Shutdown the cluster and disconnect all the users. If you have Spider
1808 set to respawn in /etc/inittab it will of course restart.
1810 <H2><A NAME="ss10.120">10.120 spoof (9)</A>
1813 <P><CODE><B>spoof <callsign> <command></B> Run commands as another user</CODE>
1815 <P>This is a very simple yet powerful command for the sysop. It allows you to
1816 issue commands as if you were a different user. This is very useful for the
1817 kind of things that users seem to always get wrong.. like home_node for
1820 <H2><A NAME="ss10.121">10.121 stat/db (5)</A>
1823 <P><CODE><B>stat/db <dbname></B> Show the status of a database</CODE>
1825 <P>Show the internal status of a database descriptor.
1826 <P>Depending on your privilege level you will see more or less information.
1827 This command is unlikely to be of much use to anyone other than a sysop.
1829 <H2><A NAME="ss10.122">10.122 stat/channel (5)</A>
1832 <P><CODE><B>stat/channel <callsign></B> Show the status of a channel on the cluster</CODE>
1834 <P>Show the internal status of the channel object either for the channel that
1835 you are on or else for the callsign that you asked for.
1836 <P>Only the fields that are defined (in perl term) will be displayed.
1838 <H2><A NAME="ss10.123">10.123 stat/msg (5)</A>
1841 <P><CODE><B>stat/msg <msgno></B> Show the status of a message</CODE>
1843 <P>This command shows the internal status of a message and includes information
1844 such as to whom it has been forwarded, its size, origin etc etc.
1846 <H2><A NAME="ss10.124">10.124 stat/user (5)</A>
1849 <P><CODE><B>stat/user <callsign></B> Show the full status of a user</CODE>
1851 <P>Shows the full contents of a user record including all the secret flags
1853 <P>Only the fields that are defined (in perl term) will be displayed.
1855 <H2><A NAME="ss10.125">10.125 sysop (0)</A>
1858 <P><CODE><B>sysop</B> Regain your privileges if you login remotely</CODE>
1860 <P>The system automatically reduces your privilege level to that of a
1861 normal user if you login in remotely. This command allows you to
1862 regain your normal privilege level. It uses the normal system: five
1863 numbers are returned that are indexes into the character array that is
1864 your assigned password (see SET/PASSWORD). The indexes start from
1866 <P>You are expected to return a string which contains the characters
1867 required in the correct order. You may intersperse those characters
1868 with others to obscure your reply for any watchers. For example (and
1869 these values are for explanation :-):
1872 password = 012345678901234567890123456789
1879 aa2bbbb0ccc5ddd7xxx3n
1883 <P>They will all match. If there is no password you will still be offered
1884 numbers but nothing will happen when you input a string. Any match is
1887 <H2><A NAME="ss10.126">10.126 talk (0)</A>
1890 <P><CODE><B>talk <callsign></B> Enter talk mode with <callsign><BR>
1891 <B>talk <callsign> <text></B> Send a text message to <callsign><BR>
1892 <B>talk <callsign> > <node_call> [<text>]</B>
1893 Send a text message to <callsign> via <node_call></CODE>
1895 <P>Send a short message to any other station that is visible on the cluster
1896 system. You can send it to anyone you can see with a SHOW/CONFIGURATION
1897 command, they don't have to be connected locally.
1898 <P>The second form of TALK is used when other cluster nodes are connected
1899 with restricted information. This usually means that they don't send
1900 the user information usually associated with logging on and off the cluster.
1901 <P>If you know that G3JNB is likely to be present on GB7TLH, but you can only
1902 see GB7TLH in the SH/C list but with no users, then you would use the
1903 second form of the talk message.
1904 <P>If you want to have a ragchew with someone you can leave the text message
1905 out and the system will go into 'Talk' mode. What this means is that a
1906 short message is sent to the recipient telling them that you are in a 'Talking'
1907 frame of mind and then you just type - everything you send will go to the
1908 station that you asked for.
1909 <P>All the usual announcements, spots and so on will still come out on your
1911 <P>If you want to do something (such as send a spot) you precede the normal
1912 command with a '/' character, eg:-
1915 /DX 14001 G1TLH What's a B class licensee doing on 20m CW?
1918 <P>To leave talk mode type:
1924 <H2><A NAME="ss10.127">10.127 type (0)</A>
1927 <P><CODE><B>type <filearea>/<name></B> Look at a file in one of the fileareas</CODE>
1929 <P>Type out the contents of a file in a filearea. So, for example, in
1930 filearea 'bulletins' you want to look at file 'arld051' you would
1934 TYPE bulletins/arld051
1936 <P>See also SHOW/FILES to see what fileareas are available and a
1939 <H2><A NAME="ss10.128">10.128 who (0)</A>
1942 <P><CODE><B>who</B> Show who is physically connected locally</CODE>
1944 <P>This is a quick listing that shows which callsigns are connected and
1945 what sort of connection they have
1947 <H2><A NAME="ss10.129">10.129 wx (0)</A>
1950 <P><CODE><B>wx <text></B> Send a weather message to local users<BR>
1951 <B>wx full <text> </B> Send a weather message to all cluster users</CODE>
1953 <P>Weather messages can sometimes be useful if you are experiencing an extreme
1954 that may indicate enhanced conditions
1956 <H2><A NAME="ss10.130">10.130 wx (enhanced for sysops) (5)</A>
1959 <P><CODE><B>wx sysop <text></B> Send a weather message to other clusters only</CODE>
1961 <P>Send a weather message only to other cluster nodes and not to general users.
1967 <A HREF="adminmanual-9.html">Previous</A>
1968 <A HREF="adminmanual.html#toc10">Contents</A>