3 # this file contains the system messages. Don't forget to reload them
4 # if you change them (load/messages)
13 addr => 'Address set to: $_[0]',
14 already => '$_[0] already connnected',
15 anns => 'Announces enabled for $_[0]',
16 annu => 'Announces disabled for $_[0]',
17 annts => 'AnnTalk enabled for $_[0]',
18 anntu => 'AnnTalk disabled for $_[0]',
19 badnode1 => '$_[0] is now a bad node',
20 badnode2 => '$_[0] is now a good node',
21 badnode3 => 'List of Bad Nodes:-',
22 bbse1 => 'Please enter your BBS address,, set/bbs <your bbs address>',
23 bbs => 'Your BBS Address is now \"$_[0]\"',
24 beepoff => 'Beeps are now off',
25 beepon => 'Beeps are now on',
26 call1 => 'Callsign lookup via $_[0]:',
27 conother => 'Sorry $_[0] you are connected to me on another port',
28 concluster => 'Sorry $_[0] you are already connected elsewhere on the cluster (on $_[1])',
29 conscript => 'no connect script called \"$_[0]\" found in $main::root/connect',
30 confail => 'connection to $_[0] failed ($_[1])',
31 constart => 'connection to $_[0] started',
32 deluser => 'User $_[0] has been deleted',
33 db1 => 'This database is hosted at $_[0]',
34 db2 => 'Sorry, but key: $_[0] was not found in $_[1]',
35 db3 => 'Sorry, database $_[0] doesn\'t exist here',
36 db4 => 'Sorry, database $_[0] located at $_[1] isn\'t currently online',
37 db5 => 'Accessing remote database on $_[0]...standby...',
38 db6 => 'Database $_[0] already exists, delete it first',
39 db7 => 'Database $_[0] created for remote node $_[1]',
40 db8 => 'Database $_[0] created locally',
41 db9 => 'Database $_[0] removed',
42 db10 => '$_[0] records imported into $_[1]',
43 db11 => 'Sending your request(s) to $_[0], please stand by...',
44 dfreq1 => 'Invalid freq $_[0] need: eg 0/30000 or hf or hf/cw',
45 dir1 => 'No messages found',
46 disc1 => 'Disconnected by $_[0]',
47 disc2 => 'Channel $_[0] disconnected',
48 disc3 => 'No Channel, but connection $_[0] disconnected',
49 disc4 => 'No Channel or connection but orphan $_[0] disconnected',
51 dup => 'Sorry, this is a duplicate',
52 dx1 => 'Frequency $_[0] not in band (see show/band); usage: DX [BY call] freq call comments',
53 dx2 => 'Need a callsign; usage: DX [BY call] freq call comments',
54 dx3 => 'The callsign or frequency is invalid',
55 dxcqs => 'DX CQ Zones enabled for $_[0]',
56 dxcqu => 'DX CQ Zones disabled for $_[0]',
57 dxitus => 'DX ITU Zones enabled for $_[0]',
58 dxituu => 'DX ITU Zones disabled for $_[0]',
59 dxs => 'DX Spots enabled for $_[0]',
60 dxu => 'DX Spots disabled for $_[0]',
61 e1 => 'Invalid command',
63 e3 => '$_[0]: $_[1] not found',
64 e4 => 'Need at least a prefix or callsign',
66 e6 => '*** No station specified ***',
67 e7 => 'callsign $_[0] not visible on the cluster',
68 e8 => 'Need a callsign and some text',
69 e9 => 'Need at least some text',
70 e10 => '$_[0] not connected locally',
71 e11 => 'Can\'t use $main:mycall as target',
72 e12 => 'Need a node callsign',
73 e13 => '$_[0] is not a node',
74 e14 => 'First argument must be numeric and > 0',
75 e15 => 'invalid qualifier \"$_[0]\"',
76 e16 => 'File \"$_[0]\" exists',
77 e17 => 'Please don\'t use the words: @_ on here',
78 e18 => 'Cannot connect to $_[0] ($!)',
79 e19 => 'Invalid character in line',
80 e20 => 'token $_[0] not recognised',
81 e21 => '$_[0] not numeric',
82 e22 => '$_[0] not a callsign',
83 e23 => '$_[0] not a range (eg 0/30000)',
84 e24 => 'Sorry, Internet access is not enabled',
85 e25 => 'Sorry the value must be between $_[0] and $_[1]',
86 e26 => 'Too many concurrent errors, you are being disconnected',
87 e27 => '$_[0] not a numeric or a callsign prefix',
88 e28 => 'Sorry, you need to be registered (SP $main::myalias to register)',
89 e29 => 'Need a password',
90 e30 => 'Cannot Open $_[0] $!',
91 e31 => '$_[0] is not a user',
92 e32 => 'Need a passphrase',
93 e33 => '$_[0] is not a number of days or a valid date',
94 e34 => 'Need a GROUP and some text',
95 e35 => 'You are not a member of $_[0], join $_[0]',
97 echoon => 'Echoing enabled',
98 echooff => 'Echoing disabled',
99 echow => '*Echoing is currently disabled, set/echo to enable',
100 emaile1 => 'Please enter your email address, set/email <your e-mail address>',
101 emaila => 'Your E-Mail Address is now \"$_[0]\"',
102 email => 'E-mail address set to: $_[0]',
103 export1 => 'usage: export <msgno> <filename>',
104 export2 => '$_[3] has error exporting msg $_[0] to $_[1] ($_[2])',
105 export3 => '$_[2 ] exported msg $_[0] to $_[1]',
106 filter1 => 'Filter $_[0] updated for $_[1]',
107 filter2 => 'Unknown filter keyword $_[0]',
108 filter3 => 'No filters defined for $_[0]',
109 filter4 => '$_[0]$_[1] Filter $_[2] deleted for $_[3]',
110 filter5 => 'need some filter commands...',
111 filter6 => '$_[0]$_[1] Filter for $[2] not found',
112 grids => 'DX Grid enabled for $_[0]',
113 gridu => 'DX Grid disabled for $_[0]',
114 illcall => 'Sorry, $_[0] is an invalid callsign',
115 hasha => '$_[0] already exists in $_[1]',
116 hashb => '$_[0] added to $_[1]',
117 hashc => '$_[0] removed from $_[1]',
118 hashd => '$_[0] not in $_[1]',
119 hashe => '$_[0] set on $_[1]',
120 helpe1 => 'Help system unavailable, tell sysop',
121 helpe2 => 'No help available on $_[0]',
122 heres => 'Here set on $_[0]',
123 heade1 => 'Using $main::mycall Coords, consider doing a set/location or set/qra',
124 hereu => 'Here unset on $_[0]',
125 homebbs => 'Home BBS set to: $_[0]',
126 homenode => 'Home Node set to: $_[0]',
127 hnodee1 => 'Please enter your Home Node, set/homenode <your home DX Cluster>',
128 hnodee2 => 'Failed to set homenode on $_[0]',
129 hnode => 'Your Homenode is now \"$_[0]\"',
130 init1 => 'sent initialisation message to $_[0]',
131 iso => '$_[0] Isolated',
132 isou => '$_[0] UnIsolated',
133 isoc => '$_[0] created and Isolated',
134 isoari => 'there is an input route filter for $_[0]; clear/route input $_[0] first',
135 isoaro => 'there is an output route filter for $_[0]; clear/route $_[0] first',
136 isow => '$_[0] is isolated; unset/isolate $_[0] first',
137 join => 'joining group $_[0]',
138 l1 => 'Sorry $_[0], you are already logged on on another channel',
139 l2 => 'Hello $_[0], this is $main::mycall in $main::myqth\nrunning DXSpider V$main::version build $main::build',
140 lang => 'Language is now English',
141 lange1 => 'set/language <lang> where <lang> is one of ($_[0])',
142 lange2 => 'failed to set language on $_[0]',
143 leave => 'leaving group $_[0]',
144 lh1 => '$main::data/hop_table.pl doesn\'t exist',
145 loce1 => 'Please enter your location,, set/location <latitude longitude>',
146 loce2 => 'Don\'t recognise \"$_[0]\" as a Lat/Long (eg 52 20 N 0 16 E)',
147 loce3 => '$_[0] is a QRA locator, please use: set/qra $_[0]',
148 loc => 'Your Lat/Long is now \"$_[0]\"',
149 lockout => '$_[0] Locked out',
150 lockoutc => '$_[0] Created and Locked out',
151 lockoutun => '$_[0] Unlocked',
152 lockoutuse => 'usage: sh/lockout <call>|ALL',
153 loginu => 'User $_[0] has logged in',
154 logoutu => 'User $_[0] has logged out',
155 loginn => 'Node $_[0] has logged in',
156 logoutn => 'Node $_[0] has logged out',
157 m1 => 'Enter Subject (30 characters):',
158 m2 => 'Copy of msg $_[0] sent to $_[1]',
159 m3 => 'Sorry, $_[0] is an unacceptable TO address',
160 m4 => 'Sorry, can\'t access message $_[0]',
161 m5 => 'Sorry, I need a message number',
162 m6 => 'Reply to: $_[0]',
163 m7 => 'Subject : $_[0]',
164 m8 => 'Enter Message /EX to send or /ABORT to exit',
165 m9 => 'New mail has arrived for you',
166 m10 => 'Message Aborted',
167 m11 => 'Message no $_[0] saved and directed to $_[1]',
168 m12 => 'Message no $_[0] deleted',
169 m13 => 'Message no $_[0] missing',
170 m14 => 'Message no $_[0] marked as sent to $_[1]',
171 m15 => 'Message no $_[0] unmarked as sent to $_[1]',
172 m16 => 'Need a Message number',
173 m17 => 'Sorry, cannot send messages in $_[0] mode',
174 m18 => 'Sorry, message $_[0] is currently set to KEEP',
175 msg1 => 'Bulletin Messages Queued',
176 msg2 => 'Private Messages Queued',
177 msg3 => 'Msg $_[0]: $_[1] changed from $_[2] to $_[3]',
178 msgu => 'usage: msg <cmd> <msgno> data...',
179 merge1 => 'Merge request for $_[1] spots and $_[2] WWV sent to $_[0]',
180 moon => 'Location dd/mm/yyyy Rise Set',
181 moon_with_azel => 'Location dd/mm/yyyy Rise Set Azim Elev',
182 mond => 'Monitoring Disabled',
183 mone => 'Monitoring Enabled',
184 namee1 => 'Please enter your name, set/name <your name>',
185 namee2 => 'Can\'t find user $_[0]!',
186 name => 'Your name is now \"$_[0]\"',
187 nodea => '$_[0] set as AK1A style Node',
188 nodeac => '$_[0] created as AK1A style Node',
189 nodeb => '$_[0] set as BBS',
190 nodebc => '$_[0] created as BBS',
191 nodec => '$_[0] set as CLX style Node',
192 nodecc => '$_[0] created as CLX style Node',
193 noder => '$_[0] set as AR-Cluster style Node',
194 noderc => '$_[0] created as AR-Cluster style Node',
195 nodes => '$_[0] set as DXSpider style Node',
196 nodesc => '$_[0] created as DXSpider style Node',
197 nodex => '$_[0] set as DXNET style Node',
198 nodexc => '$_[0] created as DXNET style Node',
199 nodeu => '$_[0] set back as a User',
200 nodee1 => 'You cannot use this command whilst your target ($_[0]) is on-line',
201 notdone => 'NOT Done',
202 nothere => 'Sorry, but $_[0] isn\'t here at the moment, please try later',
203 obscount => 'Ping obsolescence count on $_[0] set to $_[1]',
204 ok => 'Operation successful',
205 outconn => 'Outstanding connect to $_[0]',
206 page => 'Press Enter to continue, A to abort ($_[0] lines) >',
207 pagelth => 'Page Length is now $_[0]',
208 passerr => 'Please use: SET/PASS <password> <callsign>',
209 passphrase => 'Passphrase set or changed for $_[0]',
210 passphraseu => 'Passphrase removed for $_[0]',
211 password => 'Password set or changed for $_[0]',
212 passwordu => 'Password removed for $_[0]',
213 pc90s => 'PC90 enabled for $_[0]',
214 pc90u => 'PC90 disabled $_[0]',
215 pingo => 'Ping Started to $_[0]',
216 pingi => 'Ping Returned from $_[0] $_[1] (Ave $_[2]) secs',
217 pinge1 => 'Cannot ping yourself!',
218 pingint => 'Ping interval on $_[0] set to $_[1] secs',
219 'pos' => 'From Callsign: $_[0] Lat: $_[1] Long: $_[2]',
220 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
221 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
222 prs => 'Prompt now set to \"$_[0]\"',
223 pru => 'Prompt now set back to default',
224 priv => 'Privilege level changed on $_[0]',
225 prx => '$main::mycall >',
226 pw0 => 'Enter old password: ',
227 pw1 => 'Enter new password: ',
228 pw2 => 'Re-enter new password: ',
229 pw3 => 'Password changed',
230 pw4 => 'Passwords differ, password NOT changed',
231 qll => 'Please enter your location with set/location or set/qra',
232 qthe1 => 'Please enter your QTH, set/qth <your qth>',
233 qth => 'Your QTH is now \"$_[0]\"',
234 qrae1 => 'Please enter your QRA locator, set/qra <qra locator> (eg set/qra JO02LQ)',
235 qrashe1 => 'Please enter a QRA locator, eg sh/qra JO02LQ or sh/qra JO02LQ IO93NS',
236 qrae2 => 'Don\'t recognise \"$_[0]\" as a QRA locator (eg JO02LQ)',
237 qra => 'Your QRA Locator is now \"$_[0]\"',
238 qsl1 => 'Call Manager Times Last Time Seen De',
239 rcmdo => 'RCMD \"$_[0]\" sent to $_[1]',
240 read1 => 'Sorry, no new messages for you',
241 read2 => 'Msg $_[0] not found',
242 read3 => 'Msg $_[0] not available',
243 rec => '$_[0] records',
244 reg => '$_[0] registered',
245 regc => '$_[0] created and registered',
246 reginac => 'Registration is not active (set/var \$main::reqreg = 1 to activate)',
247 regun => '$_[0] unregistered',
248 route => '$_[0] on $_[1] via $_[2]',
249 sat1 => 'Tracking Table for $_[0] for the next $_[1] hours every $_[2] mins',
250 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
251 sat3 => 'Syntax: SH/SAT <name> [<hours> <interval>]',
252 sat4 => 'Satellites available/Age of Keps (days):-',
253 sat5 => 'need nnnnn.AMSAT in subject to load keps from this message',
254 satnf => 'Satellite $_[0] unknown',
256 set => '$_[0] enabled for $_[1]',
257 sethop1 => 'usage: set/hops <call> ann|spots|wwv|wcy <no of hops>',
258 sethop2 => '$_[0] hops set on $_[1]$_[2] for $_[3]',
259 sethop3 => 'No hops set for $_[0]',
260 shu => '\"SHU\" is not enough! you need to type at least \"SHUT\" to shutdown the node',
261 shutting => '$main::mycall shutting down...',
262 sloc => 'Cluster lat $_[0] long $_[1], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
263 snode1 => 'Node Call Sort Version',
264 snode2 => '$_[0] $_[1] $_[2]',
265 snode3 => '$_[0] Unknown Call',
266 sqra => 'Cluster QRA Locator$_[0], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
268 spf1 => 'spoof: creating new user $_[0]',
269 stathf => 'HF DX Spot Stats, last $_[1] days from $_[0]',
270 stathft => 'HF DX Spot Stats, last $_[2] days from $_[1] for DXCC $_[0]',
271 statvhf => 'VHF+ DX Spot Stats, last $_[1] days from $_[0]',
272 statvhft => 'VHF+ DX Spot Stats, last $_[2] days from $_[1] for DXCC $_[0]',
273 statdx => 'Total DX Spots for $_[1] days from $_[0]',
274 sun => 'Location dd/mm/yyyy Rise Set',
275 sun_with_azel => 'Location dd/mm/yyyy Rise Set Azim Elev',
276 susdb1 => 'usage: callsign state city',
277 susdb2 => 'USDB $_[0] was $_[1], $_[2]',
278 susdb3 => 'USDB $_[0] now $_[1], $_[2]',
279 susdb4 => 'USDB $_[0] deleted',
280 suser1 => 'usage: callsign user_field_name value',
281 suser2 => 'User $_[0] not found',
282 suser3 => 'User field \'$_[0]\' was \'$_[1]\' now set to \'$_[2]\'',
283 suser4 => 'User field name \'$_[0]\' doesn\'t exist',
284 time1 => 'Local Time: $_[0] $_[1], UTC $_[2]',
285 time2 => '$_[0] Local (standard) time: $_[1] ($_[2] Hours)',
286 time3 => '$_[0] $_[1]',
287 talks => 'Talk enabled for $_[0]',
288 talku => 'Talk disabled for $_[0]',
289 talkend => 'Finished talking to you',
290 talkinst => 'Entering Talkmode, /EX to end, /<cmd> to run a command',
291 talknh => 'Sorry $_[0] is not online at the moment',
292 talkprompt => 'Talk ($_[0])>',
293 talkstart => 'Starting talking to you',
294 unset => '$_[0] disabled for $_[1]',
295 unsethop1 => 'usage: unset/hops <call> ann|spots|wwv|wcy',
296 unsethop2 => 'hops unset on $_[1] for $_[0]',
297 usernf => '*** User record for $_[0] not found ***',
298 usstates => 'US State display enabled for $_[0]',
299 usstateu => 'US State display disabled for $_[0]',
300 wcy1 => '$_[0] is missing or out of range',
301 wcy2 => 'Duplicate WCY',
302 wcys => 'WCY enabled for $_[0]',
303 wcyu => 'WCY disabled for $_[0]',
304 wpc16s => 'Allow PC16 from $_[0] enabled',
305 wpc16u => 'Allow PC16 from $_[0] disabled',
306 wpc19s => 'Route PC19 for $_[0] enabled',
307 wpc19u => 'Route PC19 for $_[0] disabled',
308 wwv1 => '$_[0] is missing or out of range',
309 wwv2 => 'Duplicate WWV',
310 wwvs => 'WWV enabled for $_[0]',
311 wwvu => 'WWV disabled $_[0]',
312 wxs => 'WX enabled for $_[0]',
313 wxu => 'WX disabled for $_[0]',
316 addr => 'Addres gezet op: $_[0]',
317 already => '$_[0] reeds geconnect',
318 anns => 'Announce berichten AAN gezet voor $_[0]',
319 annu => 'Announce berichten UIT gezet voor $_[0]',
320 bbse1 => 'Geef je home bbs (mailbox),, set/bbs <home mailbox>',
321 bbs => 'Je home bbs (mailbox) is nu \"$_[0]\"',
322 beepoff => 'De beep staat nu UIT',
323 beepon => 'De beep staat nu AAN',
324 conother => 'Sorry $_[0] je bent reeds geconnect op een andere poort',
325 concluster => 'Sorry $_[0] je bent reeds op een ander cluster geconnect',
326 conscript => 'Geen connectscript aangeroepen \"$_[0]\" gevonden in $main::root/connect',
327 confail => 'Verbinding met $_[0] mislukt ($_[1])',
328 constart => 'Verbinding met $_[0] gestart',
329 disc1 => 'Gedisconnect door $_[0]',
330 disc2 => '$_[0] gedisconnect',
331 dx1 => 'Frequentie $_[0] valt niet binnen een band [Opdracht: DX freq call commentaar](Zie sh/band)',
332 dx2 => 'Ik heb een call nodig! [Opdracht: DX freq call commentaar]',
333 dxs => 'DX Spots worden WEL doorgegeven aan $_[0]',
334 dxu => 'DX Spots worden NIET doorgegeven aan $_[0]',
335 e1 => 'Ongeldige opdracht',
337 e3 => '$_[0]: $_[1] niet gevonden',
338 e4 => 'Minimaal een prefix of een call nodig',
339 e5 => 'Niet toegestaan',
340 e6 => '*** Geen station gespecifiseerd ***',
341 e7 => 'Callsign $_[0] is niet zichtbaar op het cluster',
342 e8 => 'Ik heb een call en tekst nodig',
343 e9 => 'Ik heb wel tekst nodig voor een announce!',
344 e10 => '$_[0] is niet lokaal verbonden',
345 e12 => 'Ik heb een node call nodig',
346 e13 => '$_[0] is geen node',
347 emaile1 => 'Geef uw E-mail addres, set/email <uw e-mail addres>',
348 emaila => 'Uw E-Mail addres is nu \"$_[0]\"',
349 email => 'E-mail addres gezet op: $_[0]',
350 helpe1 => 'Help systeem niet beschikbaar, meld dit aan de sysop',
351 helpe2 => 'Geen help beschikbaar over \"$_[0]\"',
352 heres => 'Aanwezigheid AAN gezet voor $_[0]',
353 heade1 => 'Gebruik gemaakt van de $main::mycall coordinaten, overweeg een set/location of set/qra',
354 hereu => 'Aanwezigheid UIT gezet voor $_[0]',
355 homebbs => 'Uw Home mailbox is nu $_[0]',
356 homenode => 'Uw (Home) DX-Cluster is : $_[0]',
357 hnodee1 => 'Geef mij uw lokale (home) DX-cluster, set/homenode <DX-cluster>',
358 hnode => 'Uw (home) DX-cluster is nu \"$_[0]\"',
359 iso => '$_[0] is geisoleerd (Isolated)',
360 isou => '$_[0] is niet meer geisoleerd (UnIsolated)',
361 isoc => '$_[0] gecreerd en geisoleerd (Isolated)',
362 l1 => 'Sorry $_[0], u bent reeds op een ander kanaal ingelogt',
363 l2 => 'Hallo $_[0], dit is $main::mycall in $main::myqth met DXSpider V$main::version',
364 lang => 'De taal zijn nu Nederlandse',
365 lh1 => '$main::data/hop_table.pl bestaat niet',
366 loce1 => 'Geef uw coordinaten met, set/location <latitude longitude>',
367 loce2 => 'Herken \"$_[0]\" niet als Lat/Long (vb 52 20 N 0 16 E)',
368 loc => 'Uw Latitude en Longitude zijn nu \"$_[0]\"',
369 lockout => '$_[0] heeft geen toegang meer (Locked out)',
370 lockoutun => '$_[0] heeft wederom toegang (Unlocked)',
371 m2 => '$_[0] Informatie: $_[1]',
372 merge1 => 'Merge verzoek voor $_[1] spots en $_[2] WWV verzonden naar $_[0]',
373 msgnew => 'Er is nieuwe post gearriveerd voor u',
374 namee1 => 'Geef aub uw naam met, set/name <uw naam>',
375 namee2 => 'Gebruiker $_[0] niet te vinden!',
376 name => 'Uw naam is gezet op \"$_[0]\"',
377 node => '$_[0] gezet als een AK1A stijl DX-cluster',
378 nodeu => '$_[0] teruggezet naar gebruiker status',
379 nodec => '$_[0] gecreeerd als AK1A stijl DX-cluster',
380 nodee1 => 'U kunt deze opdracht niet uitvoeren zolang ($_[0]) on-line is',
381 ok => 'Opdracht succesvol uitgevoerd',
382 page => 'Druk op Enter om door te gaan, A om af te breken (nog $_[0] regels) >',
383 pagelth => 'Paginalengte gezet op ($_[0]) regels',
384 passerr => 'Gebruik: SET/PASS <wachtwoord> <call>',
385 password => 'Wachtwoord gezet of gewijzigd voor $_[0]',
386 pingo => 'Ping gestart naar $_[0]',
387 pingi => 'Ping ontvangen van $_[0] $_[1] (Ave $_[2]) secs',
388 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
389 pr2 => '($_[0]) de $main::mycall $_[1] $[2] >',
390 priv => 'Privilege level gewijzigd op $_[0]',
391 prx => '$main::mycall >',
392 qll => 'Geef uw locator met set/location of set/qra',
393 qthe1 => 'Geef uw woonplaats met, set/qth <woonplaats>',
394 qth => 'Uw QTH is nu \"$_[0]\"',
395 qrae1 => 'Geef uw QRA locator, set/qra <qra locator> (vb set/qra JO33FD)',
396 qrashe1 => 'Geef uw QRA locator, vbg sh/qra JO33FD of sh/qra JO33FD IO93NS',
397 qrae2 => 'Ik herken \"$_[0]\" niet als een QRA locator (vb JO33FD)',
398 qra => 'Uw QRA Locator is nu \"$_[0]\"',
399 rcmdo => 'RCMD \"$_[0]\" verzonden naar $_[1]',
400 read1 => 'Sorry, geen berichten voor u',
401 read2 => 'Bericht $_[0] niet gevonden',
402 read3 => 'Bericht $_[0] niet beschikbaar',
403 shutting => '$main::mycall gaat QRT...',
404 sloc => 'Cluster lat $_[0] long $_[1], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
405 sqra => 'Cluster QRA Locator$_[0], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
406 talks => 'Talk berichten AAN gezet voor $_[0]',
407 talku => 'Talk berichten UIT gezet voor $_[0]',
408 usernf => '*** Gebruiker info van $_[0] niet gevonden ***',
409 wwvs => 'WWV berichten AAN gezet voor $_[0]',
410 wwvu => 'WWV berichten UIT gezet voor $_[0]',
411 wxs => 'WX berichten AAN gezet voor $_[0]',
412 wxu => 'WX berichten UIT gezet voor $_[0]',
417 addr => 'La dirección es ahora: $_[0]',
418 already => '$_[0] ya está conectado',
419 anns => 'Activada la recepción de anuncios para $_[0]',
420 annu => 'Desactivada la recepción de anuncios para $_[0]',
421 annts => 'Modo AnnTalk activado para $_[0]',
422 anntu => 'Modo AnnTalk desactivado para $_[0]',
423 badnode1 => 'No se aceptan spots generados en $_[0], se añade a la lista badnode',
424 badnode2 => 'Se aceptan spots del nodo $_[0], sale de la lista badnode',
425 badnode3 => 'Lista de nodos rechazados:',
426 bbse1 => 'Por favor introduce tu BBS, set/bbs <tu bbs>',
427 bbs => 'Tu BBS es ahora \"$_[0]\"',
428 beepoff => 'Avisos sonoros desactivados',
429 beepon => 'Avisos sonoros activados',
430 call1 => 'Se encontró el indicativo vÃa $_[0]:',
431 conother => 'Lo siento $_[0] ya estás conectado en otro puerto',
432 concluster => 'Lo siento $_[0] ya estás conectado en otro cluster',
433 conscript => 'No hay ningún script que se llame \"$_[0]\" en $main::root/connect',
434 confail => 'La conexión con $_[0] ha fallado ($_[1])',
435 constart => 'Se inicia la conexión a $_[0]',
436 deluser =>'El usuario $_[0] ha sido borrado de la base de datos',
437 db1 => 'Esta base de datos está en $_[0]',
438 db2 => 'Lo siento, pero no se encontró $_[0] en $_[1]',
439 db3 => 'Lo siento, la base de datos $_[0] no existe aquÃ',
440 db4 => 'Lo siento, la base de datos $_[0] situada en $_[1] no se encuentra disponible',
441 db5 => 'Accediendo a la base de datos remota $_[0]...espere...',
442 db6 => 'La base de datos $_[0] ya existe, bórrala primero',
443 db7 => 'La base de datos $_[0] creada para el nodo remoto $_[1]',
444 db8 => 'Base de datos $_[0] creada localmente',
445 db9 => 'La base de datos $_[0] ha sido eliminada',
446 db10 => '$_[0] registros importados para la base de datos $_[1]',
447 db11 => 'Tu petición ha sido enviada a $_[0], por favor espera...',
448 dfreq1 => 'La frecuencia no es válida $_[0] ej: 0/30000 o hf o hf/cw',
449 dir1 => 'No hay mensajes nuevos',
450 disc1 => 'Desconectado por $_[0]',
451 disc2 => 'Canal $_[0] desconectado',
452 disc3 => 'No estaba activo el canal, pero la conexión de $_[0] ha sido eliminada',
453 disc4 => 'No existÃa el canal o la conexión, $_[0] se elimina',
455 dup => 'Lo siento, esto es un duplicado',
456 dx1 => 'Frecuencia $_[0] fuera de banda (ver show/band); usa: DX [BY indicativo] frec indic. comentario',
457 dx2 => 'Necesita indicativo; usa: DX [BY indicativo] frec indic. comentario',
458 dx3 => 'El indicativo o la frecuencia es incorrecta',
459 dxs => 'Activada la recepción de spots de DX para $_[0]',
460 dxu => 'Desactivada la recepción de spots de DX para $_[0]',
461 e1 => 'Este comando no es válido',
462 e2 => 'Error: $_[0]',
463 e3 => '$_[0]: $_[1] no encontrado',
464 e4 => 'Se necesita, por lo menos, un prefijo o indicativo',
465 e5 => 'No estás autorizado',
466 e6 => '*** No se ha especificado una estación ***',
467 e7 => 'El indicativo $_[0] no es visible en el cluster',
468 e8 => 'Se necesita un indicativo y algún texto',
469 e9 => 'Se necesita al menos algún texto',
470 e10 => '$_[0] no se encuentra conectado',
471 e11 => 'No puedes usar tu propio $main:mycall como destino',
472 e12 => 'Se necesita el indicativo del nodo',
473 e13 => '$_[0] no es un nodo',
474 e14 => 'El primer argumento debe de ser numérico y > 0',
475 e15 => 'calificador no válido \"$_[0]\"',
476 e16 => 'El fichero \"$_[0]\" ya existe',
477 e17 => 'Por favor no uses la palabra: @_ aquÃ',
478 e18 => 'No se puede conectar con $_[0] ($!)',
479 e19 => 'Carácter no válido en la lÃnea',
480 e20 => 'SÃmbolo $_[0] no reconocido',
481 e21 => '$_[0] no es numérico',
482 e22 => '$_[0] no es un indicativo',
483 e23 => '$_[0] fuera de rango (ej: 0/30000)',
484 e24 => 'Lo siento, el acceso a internet no está habilitado',
485 e25 => 'Lo siento el valor debe de estar entre $_[0] y $_[1]',
486 e26 => 'Demasiados errores, serás desconectado',
487 e27 => '$_[0] no es un numero o un prefijo',
488 e28 => 'Lo siento, necesitas registrarte (SP $main::myalias para registrarte)',
489 e29 => 'Necesitas password',
490 e30 => 'No se puede abrir $_[0] $!',
491 e31 => '$_[0] no es un usuario',
492 e32 => 'Se necesita una frase de contraseña',
494 echoon => 'Eco local activado',
495 echooff => 'Eco local desactivado',
496 echow => '*Eco local desactivado, set/echo para activarlo',
497 emaile1 => 'Por favor introduce tu E-mail, set/email <tu E-mail>',
498 emaila => 'Tu dirección E-Mail es ahora \"$_[0]\"',
499 email => 'La dirección E-mail es ahora: $_[0]',
500 export1 => 'uso: export <numero_mensaje> <nombre_fichero>',
501 export2 => '$_[3] hubo un error exportando mensaje $_[0] a $_[1] ($_[2])',
502 export3 => '$_[2 ] exportando mensaje $_[0] a $_[1]',
503 filter1 => 'Filtro $_[0] actualizado para $_[1]',
504 filter2 => 'Es necesario un valor para $_[0]',
505 filter3 => 'No hay filtros definidos para $_[0]',
506 filter4 => '$_[0]$_[1] Filtros $_[2] borrados para $_[3]',
507 filter5 => 'Se necesitan algunos comandos para el filtro...',
508 filter6 => '$_[0]$_[1] Filtro para $[2] no encontrado',
509 grids => 'Activada recepción de locators en spot (DX Grid) para $_[0]',
510 gridu => 'Desactivada recepción de locators en spot (DX Grid) para $_[0]',
511 illcall => 'Lo siento, $_[0] no es un indicativo válido',
512 hasha => '$_[0] ya existe en $_[1]',
513 hashb => '$_[0] añadido a $_[1]',
514 hashc => '$_[0] eliminado desde $_[1]',
515 hashd => '$_[0] no en $_[1]',
516 hashe => '$_[0] activado $_[1]',
517 helpe1 => 'La ayuda no está disponible, comunÃcaselo al sysop',
518 helpe2 => 'No hay ayuda disponible para $_[0]',
519 heres => 'Se informa a la red: $_[0] está presente',
520 heade1 => 'Usando las coord. de $main::mycall, se recomienda usar set/location o set/qra',
521 hereu => 'Se informa a la red: $_[0] está ausente',
522 homebbs => 'Tu BBS es ahora: $_[0]',
523 homenode => 'Tu cluster habitual es ahora: $_[0]',
524 hnodee1 => 'Por favor introduce tu cluster habitual, set/homenode <Tu DX cluster>',
525 hnodee2 => 'Error al definir homenode en $_[0]',
526 hnode => 'Tu nodo habitual es ahora \"$_[0]\"',
527 init1 => 'Enviado mensaje de inicialización a $_[0]',
528 iso => 'El cluster $_[0] se pone en modo pasivo (Aislado)',
529 isou => 'El cluster $_[0] se pone en modo activo',
530 isoc => '$_[0] creado y definido como pasivo (Aislado)',
531 isoari => 'Existe un filtro de entrada de rutas para $_[0]; clear/route input $_[0] primero',
532 isoaro => 'Existe un filtro de rutas hacia $_[0]; clear/route $_[0] primero',
533 isow => '$_[0] está en modo aislado; unset/isolate $_[0] primero',
534 l1 => 'Lo siento $_[0], ya estás conectado en otro canal',
535 l2 => 'Hola $_[0], esta es $main::mycall en $main::myqth usando DXSpider V$main::version',
536 lang => 'El idioma es ahora Español',
537 lange1 => 'set/language <idioma> donde <idioma> es uno entre ($_[0])',
538 lange2 => 'Error al seleccionar idioma en $_[0]',
539 lh1 => '$main::data/hop_table.pl no existe',
540 loce1 => 'Por favor introduce tu posición, set/location <latitud longitud>',
541 loce2 => 'No reconocida \"$_[0]\" como una Lat/Long (ej: 52 20 N 0 16E)',
542 loce3 => '$_[0] es un QRA locator, por favor usa: set/qra $_[0]',
543 loc => 'Tu Lat/Long es ahora \"$_[0]\"',
544 lockout => '$_[0] Excluido del sistema',
545 lockoutc => '$_[0] Creado y excluido del sistema',
546 lockoutun => '$_[0] autorizado para conectar',
547 lockoutuse => 'Uso: sh/lockout <indicativo|prefijo>|ALL',
548 loginu => '$_[0] conecta',
549 logoutu => '$_[0] se desconecta',
550 loginn => '$_[0] conecta',
551 logoutn => '$_[0] se desconecta',
552 m1 => 'Introduce el tÃtulo (máx. 30 caractéres):',
554 m2 => 'Copia del mensaje $_[0] enviada a $_[1]',
555 m3 => 'Lo siento, $_[0] no se aceptan mensajes a ese tópico',
556 m4 => 'Lo siento, no se puede acceder al mensaje $_[0]',
557 m5 => 'Lo siento, se necesita un número de mensaje',
558 m6 => 'Reenviado a: $_[0]',
559 m7 => 'TÃtulo : $_[0]',
560 m8 => 'Introduce mensaje. /EX para terminar o /ABORT para interrumpir',
561 m9 => 'Hay correo nuevo para ti. Bórralo una vez leÃdo.',
562 m10 => 'mensaje interrumpido',
563 m11 => 'mensaje nr $_[0] guardado y enviado a $_[1]',
564 m12 => 'mensaje nr $_[0] borrado',
565 m13 => 'mensaje nr $_[0] no encontrado',
566 m14 => 'mensaje nr $_[0] marcado para ser enviado a $_[1]',
567 m15 => 'mensaje nr $_[0] no se enviará a $_[1]',
568 m16 => 'Se necesita un número de mensaje',
569 m17 => 'Lo siento, no puedo enviar el mensaje en $_[0] modo',
570 msg1 => 'Cola de mensajes tipo BoletÃn',
571 msg2 => 'Cola de mensajes tipo Privados',
572 msg3 => 'Msg $_[0]: $_[1] cambiado de $_[2] a $_[3]',
573 msgu => 'uso: msg <cmd> <msgno> data...',
574 merge1 => 'Petición de envÃo de $_[1] spots y $_[2] WWV enviada a $_[0]',
575 moon => 'QTH dd/mm/yyyy Salida Puesta',
576 moon_with_azel => 'QTH dd/mm/yyyy Salida Puesta Azim Elev',
577 mond => 'Activado modo monitor',
578 mone => 'Desactivado modo monitor',
579 namee1 => 'Por favor, introduce tu nombre set/name <tu nombre>',
580 namee2 => 'No se encuentra el usuario $_[0]!',
581 name => 'Tu nombre es \"$_[0]\"',
582 nodea => '$_[0] definido como nodo AK1A ',
583 nodeac => '$_[0] creado como nodo AK1A ',
584 nodeb => '$_[0] definido como BBS',
585 nodebc => '$_[0] creado como BBS',
586 nodec => '$_[0] definido como nodo CLX ',
587 nodecc => '$_[0] creado como nodo CLX ',
588 noder => '$_[0] definido como nodo AR-Cluster ',
589 noderc => '$_[0] creado como nodo AR-Cluster ',
590 nodes => '$_[0] definido como nodo DXSpider ',
591 nodesc => '$_[0] creado como nodo DXSpider ',
592 nodex => '$_[0] definido como nodo DXNET ',
593 nodexc => '$_[0] creado como nodo DXNET ',
594 nodeu => '$_[0] es ahora un usuario',
595 nodee1 => 'No puedes usar este comando mientras tu objetivo ($_[0]) se encuentra',
596 notdone => 'No se pudo hacer',
597 nothere => 'Lo siento, pero $_[0] no está aquà ahora, inténtalo mas tarde',
598 obscount => 'El parámetro Ping obsolescence count para $_[0] ajustado a $_[1]',
599 ok => 'Operación realizada',
600 outconn => 'Iniciando conexión con $_[0]',
601 page => 'Teclea Enter para continuar, A para abortar (Quedan $_[0] lÃneas) >',
602 pagelth => 'La longitud de las páginas es ahora $_[0]',
603 passerr => 'Por favor usa: SET/PASS <password> <indicativo>',
604 passphrase => 'Passphrase definida o cambiada para $_[0]',
605 passphraseu => 'Passphrase borrada para $_[0]',
607 password => 'El Password ha sido definido o cambiado para $_[0]',
608 passwordu => 'Contraseña borrada para $_[0]',
609 pc90s => 'PC90 activado para $_[0]',
610 pc90u => 'PC90 desactivado para $_[0]',
611 pingo => 'Iniciado el ping a $_[0]',
612 pingi => 'Ping devuelto por $_[0] $_[1] (Ave $_[2]) segundos',
613 pinge1 => 'No puedes enviarte un ping a ti mismo!',
614 pingint => 'Intervalo de ping para $_[0] ajustado a $_[1] segundos',
615 'pos' => 'Desde el indicativo: $_[0] Lat: $_[1] Long: $_[2]',
616 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
617 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
618 prs => 'El Prompt ha sido cambiado a \"$_[0]\"',
619 pru => 'El Prompt vuelve a ser el normal por defecto',
620 priv => 'Nivel de privilegios modificado para $_[0]',
621 prx => '$main::mycall >',
622 pw0 => 'Escribe el password antiguo: ',
623 pw1 => 'Escribe el nuevo password: ',
624 pw2 => 'Confirma el nuevo password: ',
625 pw3 => 'El Password ha sido cambiado',
626 pw4 => 'Los passwords no coinciden, NO se han cambiado',
627 qll => 'Por favor introduce tu locator con set/location o set/qra',
628 qthe1 => 'Por favor introduce tu QTH, set/qth <tu qth>',
629 qth => 'Tu QTH es ahora \"$_[0]\"',
630 qrae1 => 'Por favor introduce tu QRA locator, set/qra <qra locator> (ej: set/qra JO02LQ)',
631 qrashe1 => 'Por favor introduce un QRA locator, ej sh/qra JO02LQ o sh/qra JO02LQ IO93NS',
632 qrae2 => 'No se reconoce \"$_[0]\" como un QRA locator ( ej JO02LQ)',
633 qra => 'Tu QRA Locator es ahora \"$_[0]\"',
634 rcmdo => 'RCMD \"$_[0]\" enviado a $_[1]',
635 read1 => 'Lo siento, no hay mensajes nuevos para ti',
636 read2 => 'Mensaje $_[0] no encontrado',
637 read3 => 'Mensaje $_[0] no disponible',
638 rec => '$_[0] registros',
639 reg => '$_[0] registrado',
640 regc => '$_[0] creado y registrado',
641 reginac => 'El registro no está activo (set/var \$main::regreq = 1 para activarlo)',
642 regun => 'El usuario $_[0] no esta registrado',
643 route => '$_[0] en $_[1] vÃa $_[2]',
644 sat1 => 'Tabla de seguimiento $_[0] para las próximas $_[1] horas cada $_[2] minutos',
645 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
646 sat3 => 'Sintaxis: SH/SAT <nombre> [<horas> <intervalo>]',
647 sat4 => 'Satélites disponibles:',
648 sat5 => 'Es necesario el tÃtulo nnnn.AMSAT para actualizar datos keps. desde un mensaje',
649 satnf => 'Satélite $_[0] desconocido',
651 sethop1 => 'uso: set/hops <indicativo> ann|spots|wwv|wcy <nr de hops>',
652 sethop2 => '$_[0] hops set on $_[1]$_[2] for $_[3]',
653 sethop3 => 'No hay hops definidos para $_[0]',
654 shu => '\"SHU\" No es suficiente! Es necesario como mÃnimo escribir \"SHUT\" para apagar el cluster',
655 shutting => '$main::mycall shutting down...',
656 sloc => 'Cluster lat $_[0] long $_[1], NO OLVIDES CAMBIAR TU DXVars.pm',
657 snode1 => 'Nodo Call Sort Versión',
658 snode2 => '$_[0] $_[1] $_[2]',
659 snode3 => '$_[0] Indicativo desconocido',
660 sqra => 'Cluster QRA Locator$_[0], NO OLVIDES CAMBIAR TU DXVars.pm',
661 sorry => 'Lo siento',
662 spf1 => 'spoof: creando nuevo usuario $_[0]',
663 stathf => 'EstadÃsticas de spots en HF de los últimos 31 dÃas',
664 stathft => 'EstadÃsticas de spots en HF de los últimos 31 dÃas para DXCC $_[0]',
665 statvhf => 'VHF + DX Spot Stats, últimos 31 dÃas',
666 statvhft => 'VHF + DX Spot Stats, últimos 31 dÃas para DXCC $_[0]',
667 statdx => 'Total de Spots de DX en los últimos 31 dÃas',
668 sun => 'QTH dd/mm/yyyy Salida Puesta',
669 sun_with_azel => 'QTH dd/mm/yyyy Salida Puesta Azim Elev',
670 susdb1 => 'uso: indicativo estado ciudad',
671 susdb2 => 'USDB $_[0] era $_[1], $_[2]',
672 susdb3 => 'USDB $_[0] es ahora $_[1], $_[2]',
673 susdb4 => 'USDB $_[0] borrado',
674 suser1 => 'uso: indicativo user_field_name valor',
675 suser2 => 'Usuario $_[0] no encontrado',
676 suser3 => 'User field \'$_[0]\' era \'$_[1]\' ahora es \'$_[2]\'',
677 suser4 => 'User field name \'$_[0]\' no existe',
678 time1 => 'Horario local: $_[0] $_[1], UTC $_[2]',
679 time2 => '$_[0] Local (standard) time: $_[1] ($_[2] Horas)',
680 time3 => '$_[0] $_[1]',
681 talks => 'Recepción de mensajes Talk activado para $_[0]',
682 talku => 'Recepción de mensajes Talk desactivado para $_[0]',
683 talkend => 'Finalizado modo talk contigo',
684 talkinst => 'Entrando en modo talk, /EX para salir, /<cmd> para ejecutar un comando',
685 talknh => 'Lo siento $_[0] no está conectado en este momento',
686 talkprompt => 'Talk ($_[0])>',
687 talkstart => 'Iniciando modo talk contigo',
688 unset => '$_[0] deshabilitado para $_[1]',
689 unsethop1 => 'uso: unset/hops <call> ann|spots|wwv|wcy',
690 unsethop2 => 'Borrados los hops para $_[1] en $_[0]',
691 usernf => '*** Registro de usuario $_[0] no encontrado ***',
692 wcy1 => '$_[0] falta o esta fuera de rango',
693 wcy2 => 'WCY Duplicado',
694 wcys => 'Activada recepción de anuncios WCY para $_[0]',
695 wcyu => 'Desactivada recepción de anuncios WWV para $_[0]',
696 wwv1 => '$_[0] falta o esta fuera de rango',
697 wwv2 => 'WWV Duplicado',
698 wwvs => 'Activada recepción de anuncios WWV para $_[0]',
699 wwvu => 'Desactivada recepción de anuncios WWV para $_[0]',
700 wxs => 'Activada recepción de anuncios WX para $_[0]',
701 wxu => 'Desactivada recepción de anuncios WX para $_[0]',
704 addr => 'Adresse gesetzt auf: $_[0]',
705 already => '$_[0] bereits connnected',
706 anns => 'Announce flag gesetzt auf $_[0]',
707 annu => 'Announce flag zurueckgesetzt auf $_[0]',
708 annts => 'AnnTalk flag gesetzt auf $_[0]',
709 anntu => 'AnnTalk flag zurueckgesetzt auf $_[0]',
710 badnode1 => '$_[0] ist nun ein bad node',
711 badnode2 => '$_[0] ist nun ein good node',
712 badnode3 => 'Liste der Bad Nodes:-',
713 bbse1 => 'Bitte die BBS Adresse eingeben,, set/bbs <your bbs address>',
714 bbs => 'Deine BBS Adresse ist nun \"$_[0]\"',
715 beepoff => 'Beeps sind nun aus',
716 beepon => 'Beeps sind nun eingeschaltet',
717 call1 => 'Callsign lookup via $_[0]:',
718 conother => 'Sorry $_[0] Du bist zu mir auf einem anderen Port connected',
719 concluster => 'Sorry $_[0] Du bist schon anderswo in einem Cluster connected (on $_[1])',
720 conscript => 'Kein connect script mit Namen \"$_[0]\" gefunden in $main::root/connect',
721 confail => 'Verbindung zu $_[0] misslungen ($_[1])',
722 constart => 'Verbindung zu $_[0] gestartet',
723 deluser => 'User $_[0] wurde geloescht',
724 db1 => 'Diese Datenbank ist untergebracht bei $_[0]',
725 db2 => 'Sorry, aber Scluesselwort: $_[0] wurde nicht gefunden in $_[1]',
726 db3 => 'Sorry, Datenbank $_[0] existiert hier nicht',
727 db4 => 'Sorry, Datenbank $_[0] untergebracht bei $_[1] ist nicht online',
728 db5 => 'Zugriff auf remote Datenbank bei $_[0]...standby...',
729 db6 => 'Datenbank $_[0] existiert bereits, bitte zuerst loeschen',
730 db7 => 'Datenbank $_[0] angelegt fuer remote Cluster $_[1]',
731 db8 => 'Datenbank $_[0] lokal angelegt',
732 db9 => 'Datenbank $_[0] entfernt',
733 db10 => '$_[0] Datensaetze importiert in $_[1]',
734 db11 => 'Sende Deine Anfrage(n)an $_[0], bitte stand by...',
735 dfreq1 => 'Ungueltige Freq $_[0] brauche: z.B. 0/30000 oder hf oderr hf/cw',
736 dir1 => 'Keine Nachricht gefunden',
737 disc1 => 'Disconnected von $_[0]',
738 disc2 => 'Kanal $_[0] disconnected',
739 disc3 => 'Kein Kanal, aber Verbindung $_[0] disconnected',
740 disc4 => 'Kein Kanal oder Verbindung, aber Waise $_[0] disconnected',
742 dup => 'Sorry, dies ist ein Duplikat',
743 dx1 => 'Frequenz $_[0] nicht im Band (siehe show/band); Gebrauch: DX [BY call] Freq Call Kommentar',
744 dx2 => 'Brauche ein Rufzeichen; Gebrauch: DX [BY call] Freq Call Kommentar',
745 dx3 => 'Das Rufzeichen oder Frequenz ist ungueltig',
746 dxs => 'DX Spots flag gesetzt auf $_[0]',
747 dxu => 'DX Spots flag zurueckgesetzt auf $_[0]',
748 e1 => 'Ungueltiger Befehl',
749 e2 => 'Fehler: $_[0]',
750 e3 => '$_[0]: $_[1] nicht gefunden',
751 e4 => 'Brauche zumindestens einen Prefix oder ein Rufzeichen',
752 e5 => 'Nicht erlaubt',
753 e6 => '*** Keine Station angegeben ***',
754 e7 => 'Rufzeichen $_[0] nicht sichtbar im Cluster',
755 e8 => 'Brauche ein Rufzeichen und etwas Text',
756 e9 => 'Brauche wenigstens etwas Text',
757 e10 => '$_[0] nicht lokal connected',
758 e11 => 'Kann nicht $main:mein Rufzeichen als Ziel',
759 e12 => 'Brauche ein Node Rufzeichen',
760 e13 => '$_[0] ist kein Node',
761 e14 => 'Erstes Argument muss eine Zahl und > 0 sein',
762 e15 => 'Unguelitges Abfragekriterium \"$_[0]\"',
763 e16 => 'Datei \"$_[0]\" existiert',
764 e17 => 'Bitte gebrauche dieses Wort: @_ nicht hier',
765 e18 => 'Kann nicht verbinden mit $_[0] ($!)',
766 e19 => 'Ungueltiger Character in der Zeile',
767 e20 => 'Kuerzel $_[0] nicht erkannt',
768 e21 => '$_[0] nicht numerisch',
769 e22 => '$_[0] kein Rufzeichen',
770 e23 => '$_[0] kein Bereich (z.B. 0/30000)',
771 e24 => 'Sorry, Internet Zugriff ist nichtfreigeschaltet',
773 e25 => 'Sorry der Wert muss zwischen $_[0] und $_[1] sein',
774 e26 => 'Zu viele Fehler gleichzeitig, Du wirst disconnected',
775 e27 => '$_[0] kein numerisches oder Rufzeichen Prefix',
776 e28 => 'Sorry, Du musst Dich registrieren (SP $main::myalias to register)',
777 e29 => 'Brauche eine Passwort',
778 echoon => 'Echo enabled',
779 echooff => 'Echo disabled',
780 echow => '*Echo ist im moment disabled, set/echo to enable',
781 emaile1 => 'Bitte email Addresse eingeben, set/email <Deine e-mail Adresse>',
782 emaila => 'Deine E-Mail Adresse ist nun \"$_[0]\"',
783 email => 'E-mail Adresse gesetzt auf: $_[0]',
784 export1 => 'Gebrauch: export <msgno> <dateiname>',
785 export2 => '$_[3] has error exporting msg $_[0]to $_[1] ($_[2])',
786 export3 => '$_[2 ] exportierte msg $_[0] to $_[1]',
787 filter1 => 'Filter $_[0] upgedated fuer $_[1]',
788 filter2 => 'Unbekanntes Filter Schluesselwort $_[0]',
789 filter3 => 'Keine Filter definiert fuer $_[0]',
790 filter4 => '$_[0]$_[1] Filter $_[2] geloescht fuer$_[3]',
791 filter5 => 'brauche ein paar Filter Kommandos...',
792 filter6 => '$_[0]$_[1] Filter fuer $[2] nicht gefunden',
793 grids => 'DX Grid flag gesetzt auf $_[0]',
794 gridu => 'DX Grid flag zurueckgesetzt auf $_[0]',
795 illcall => 'Sorry, $_[0] ist ein ungueltiges Rufzeichen',
796 hasha => '$_[0] existiert bereits in $_[1]',
797 hashb => '$_[0] zugefuegt zu $_[1]',
798 hashc => '$_[0] entfernt von $_[1]',
799 hashd => '$_[0] nicht in $_[1]',
800 hashe => '$_[0] gesetzt auf $_[1]',
801 helpe1 => 'Hilfe System nicht verfuegbar, bitte Sysop benachrichtigen',
802 helpe2 => 'Keine Hilfe verfuegbar auf $_[0]',
803 heres => 'Hier gesetzt auf $_[0]',
804 heade1 => 'Using $main::mycall Coords, entspricht einem set/location or set/qra',
805 hereu => 'Here zurueckgesetzt auf $_[0]',
806 homebbs => 'Heimat BBS gesetzt auf: $_[0]',
807 homenode => 'Heimat Node gesetzt auf: $_[0]',
808 hnodee1 => 'Bitte Heimat Node eingeben, set/homenode <dein Heimat DX Cluster>',
809 hnodee2 => 'Heimat Node setzen ist misslungen $_[0]',
810 hnode => 'Dein Heimat Node ist nun \"$_[0]\"',
811 init1 => 'Initialisierungs Nachricht gesendet an $_[0]',
812 iso => '$_[0] Isoliert',
813 isou => '$_[0] UnIsoliert',
814 isoc => '$_[0] erstellt und Isoliert',
815 isoari => 'Es gibt einen Eingabe Route Filter fuer $_[0]; clear/route input $_[0] zuerst',
816 isoaro => 'Es gibt einen Ausgabe Route Filter fuer $_[0]; clear/route $_[0] zuerst',
817 isow => '$_[0] ist isoliert; unset/isolate $_[0] zuerst',
818 l1 => 'Sorry $_[0], Du bist bereit auf einem anderen Kanal eingeloggt',
819 l2 => 'Moin $_[0], hier ist $main::mycall in $main::myqth\nrunning DXSpider V$main::version build $main::build',
820 lang => 'Sprache ist jetzt Deutch',
821 lange1 => 'set/language <lang> wobei <lang> ist eine von ($_[0])',
822 lange2 => 'Fehler beim setzen der Sprache auf $_[0]',
823 lh1 => '$main::data/hop_table.pl existiert nicht',
824 loce1 => 'Bitte Deinen Standort eingeben,, set/location <latitude longitude>',
825 loce2 => 'Nicht anerkannt \"$_[0]\" als Lat/Long (z.B. 52 20 N 0 16 E)',
826 loce3 => '$_[0] ist ein QRA Locator, gebrauch: set/qra $_[0]',
827 loc => 'Dein Lat/Long ist nun \"$_[0]\"',
828 lockout => '$_[0] ausgesperrt',
829 lockoutc => '$_[0] erstellt und ausgesperrt',
830 lockoutun => '$_[0] Aussperrung aufgehoben',
831 lockoutuse => 'Gebrauch: sh/lockout <Rufzeichen>|ALL',
832 loginu => 'User $_[0] hat eingeloggt',
833 logoutu => 'User $_[0] hat ausgeloggt',
834 loginn => 'Node $_[0] hat eingeloggt',
835 logoutn => 'Node $_[0] hat ausgeloggt',
836 m1 => 'Subjekt eingeben (30 Zeichen):',
837 m2 => 'Kopie der msg $_[0] gesendet an $_[1]',
838 m3 => 'Sorry, $_[0] ist keine akzeptable TO Adresse',
839 m4 => 'Sorry, kann nicht zugreifen auf Nachricht $_[0]',
840 m5 => 'Sorry, ich brauche eine Nachrichten Nummer',
841 m6 => 'Reply to: $_[0]',
842 m7 => 'Subject : $_[0]',
843 m8 => 'Nachricht eingeben, /EX zum absenden oder /ABORT zum abbrechen',
844 m9 => 'Neue Nachricht(en) fuer Dich',
845 m10 => 'Nachricht abgebrochen',
846 m11 => 'Nachricht Nr. $_[0] gesichert und weitergeleitet an $_[1]',
847 m12 => 'Nachricht Nr. $_[0] geloescht',
848 m13 => 'Nachricht Nr. $_[0] fehlt',
849 m14 => 'Nachricht Nr. $_[0] markiert als gesendet an $_[1]',
850 m15 => 'Nachricht Nr. $_[0] unmarkiert als gesendet an $_[1]',
851 m16 => 'Brauche eine Nachrichten Nummer',
852 m17 => 'Sorry, kann Nachricht nicht senden im $_[0] mode',
853 msg1 => 'Bulletin Nachrichten aufgeschoben',
854 msg2 => 'Private Nachrichten aufgeschoben',
855 msg3 => 'Msg $_[0]: $_[1] geaendert von $_[2] auf $_[3]',
856 msgu => 'Gebrauch: msg <cmd> <msgno> data...',
857 merge1 => 'Merge request for $_[1] spots and $_[2] WWV sent to $_[0]',
858 moon => 'Standort dd/mm/yyyy Rise Set',
859 moon_with_azel => 'Standort dd/mm/yyyy Rise Set Azim Elev',
860 mond => 'Ueberwachung Disabled',
861 mone => 'Ueberwachung Enabled',
862 namee1 => 'Bitte Deinen Namen eingeben, set/name <dein name>',
863 namee2 => 'Kann User $_[0]nicht finden!',
864 name => 'Dein Name ist jetzt \"$_[0]\"',
865 nodea => '$_[0] gesetzt als AK1A style Node',
866 nodeac => '$_[0] erstellt als AK1A style Node',
867 nodeb => '$_[0] gesetzt als BBS',
868 nodebc => '$_[0] erstellt als BBS',
869 nodec => '$_[0] gesetzt als CLX style Node',
870 nodecc => '$_[0] erstellt als CLX style Node',
871 noder => '$_[0] gesetzt als AR-Cluster style Node',
872 noderc => '$_[0] erstellt als AR-Cluster style Node',
873 nodes => '$_[0] gesetzt als DXSpider style Node',
874 nodesc => '$_[0] erstellt als DXSpider style Node',
875 nodex => '$_[0] gesetzt als DXNET style Node',
876 nodexc => '$_[0] erstellt als DXNET style Node',
877 nodeu => '$_[0] zurueckgesetzt als ein User',
878 nodee1 => 'Du kannst dieses Kommando nicht waehrend Dein Ziel ($_[0]) online ist',
879 notdone => 'Nicht ausgefuehrt',
880 nothere => 'Sorry, aber $_[0] ist nicht hier im Moment, bitte spaeter nocheinmal Versuchen',
881 obscount => 'Ping obsolescence count on $_[0] set to $_[1]',
882 ok => 'Operation erfolgreich',
883 outconn => 'Outstanding connect to $_[0]',
884 page => 'Druecke Enter zum fortfahren, A zum abbrechen ($_[0] lines) >',
885 pagelth => 'Seitenlaenge ist nun $_[0]',
886 passerr => 'Gebrauch: SET/PASS <Passwort> <Rufzeichen>',
887 password => 'Passwort gesetzt oder geaendert fuer $_[0]',
888 passwordu => 'Passwort geloescht fuer $_[0]',
889 pingo => 'Ping Started to $_[0]',
890 pingi => 'Ping Returned from $_[0] $_[1] (Ave $_[2]) secs',
891 pinge1 => 'Cannot ping yourself!',
892 pingint => 'Ping interval on $_[0] set to $_[1] secs',
893 'pos' => 'Von Rufzeichen: $_[0] Lat: $_[1] Long: $_[2]',
894 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
895 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
896 priv => 'Priviligierten Level geaendert auf $_[0]',
897 prx => '$main::mycall >',
898 pw0 => 'Altes Passwort eingeben: ',
899 pw1 => 'Neues Passwort eingeben: ',
900 pw2 => 'Wiederhole neues Passwort: ',
901 pw3 => 'Passwort geaendert',
902 pw4 => 'Passwoerter differieren, Passwort NICHT geaendert',
903 qll => 'Bitte gib Deinen QRA Locator ein mit set/location oder set/qra',
904 qthe1 => 'Bitte gib Dein QTH ein mit set/qth <dein qth>',
905 qth => 'Dein QTH ist nun \"$_[0]\"',
906 qrae1 => 'Bitte gib Deinen QRA Locator ein mit set/qra <qra locator> (z.B. set/qra JO44RK)',
907 qrashe1 => 'Bitte einen QRA Locator eingeben, z.B. sh/qra JO02LQ oder sh/qra JO02LQ IO93NS',
908 qrae2 => 'Erkenne nicht \"$_[0]\" als ein QRA Locator (z.B. JO02LQ)',
909 qra => 'Dein QRA Locator ist nun \"$_[0]\"',
910 rcmdo => 'RCMD \"$_[0]\" gesendet an $_[1]',
911 read1 => 'Sorry, keine neuen Nachrichtenfuer Dich',
912 read2 => 'Msg $_[0] nicht gefunden',
913 read3 => 'Msg $_[0] nicht verfuegbar',
914 rec => '$_[0] records',
915 reg => '$_[0] registriert',
916 regc => '$_[0] erstellt und registriert',
917 reginac => 'Registrierung ist nicht aktiv (set/var \$main::reqreg = 1 to activate)',
918 regun => '$_[0] unregistriert',
919 route => '$_[0] auf $_[1] via $_[2]',
920 sat1 => 'Tracking Tabelle fuer $_[0] fuer den naechsten $_[1] Stunden alle $_[2] mins',
921 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
922 sat3 => 'Syntax: SH/SAT <name> [<hours> <interval>]',
923 sat4 => 'Satelliten verfuegbar:-',
924 satnf => 'Satellit $_[0] unbekannt',
926 sethop1 => 'Gebrauch: set/hops <Rufzeichen> ann|spots|wwv|wcy <Anzahl der Hops>',
927 sethop2 => '$_[0] hops gesetzt auf $_[1]$_[2] fuer $_[3]',
928 sethop3 => 'Keine hops gesetzt fuer $_[0]',
929 shutting => '$main::mycall shutting down...',
930 sloc => 'Cluster lat $_[0] long $_[1], Nicht vergessen die DXVars.pm zu aendern',
931 snode1 => 'Node Call Sort Version',
932 snode2 => '$_[0] $_[1] $_[2]',
933 snode3 => '$_[0] Unbekanntes Rufzeichen',
934 sqra => 'Cluster QRA Locator$_[0], Nicht vergessen die DXVars.pm zu aendern',
936 spf1 => 'spoof: erzeuge neuen User $_[0]',
937 stathf => 'HF DX Spot Stats, letzte 31 Tage',
938 stathft => 'HF DX Spot Stats, letzte 31 Tage fuer DXCC $_[0]',
939 statvhf => 'VHF+ DX Spot Stats, letzte 31 Tage',
940 statvhft => 'VHF+ DX Spot Stats, letzte 31 Tage fuer DXCC $_[0]',
941 statdx => 'Total DX Spots letzte 31 Tage',
942 sun => 'Location dd/mm/yyyy Rise Set',
943 sun_with_azel => 'Location dd/mm/yyyy Rise Set Azim Elev',
944 suser1 => 'Gebrauch: Rufzeichen user_field_name value',
945 suser2 => 'User $_[0] nicht gefunden',
946 suser3 => 'User Feld \'$_[0]\' war \'$_[1]\' nun gesetzt auf \'$_[2]\'',
947 suser4 => 'User Feld name \'$_[0]\' existiert nicht',
948 time1 => 'Lokala Zeit: $_[0] $_[1], UTC $_[2]',
949 time2 => '$_[0] Lokale (standard) Zeit: $_[1] ($_[2] Stunden)',
950 time3 => '$_[0] $_[1]',
951 talks => 'Talk flag gesetzt auf $_[0]',
952 talku => 'Talk flag zurueckgesetzt auf $_[0]',
953 talkend => 'Beendet Talk zu Dir',
954 talkinst => 'Talkmode, /EX zum beenden, /<cmd> um ein Kommando auszufuehren',
955 talknh => 'Sorry $_[0] ist im moment nicht online',
956 talkprompt => 'Talk ($_[0])>',
957 talkstart => 'Startet Talkmode zu Dir',
958 usernf => '*** User Satz fuer $_[0] nicht gefunden ***',
959 wwvs => 'WWV flag gesetzt auf $_[0]',
960 wwvu => 'WWV flag zurueckgesetzt auf $_[0]',
961 wxs => 'WX flag gesetzt auf $_[0]',
962 wxu => 'WX flag zurueckgesetzt auf $_[0]',
965 addr => 'Indirizzo impostato a: $_[0]',
966 already => '$_[0] e\' connesso',
967 anns => 'Annunci attivati alle_[0]',
968 annu => 'Annunci disattivati alle $_[0]',
969 annts => 'Talk attivato alle $_[0]',
970 anntu => 'Talk disattivato alle $_[0]',
971 badnode1 => '$_[0] e\' un nodo disabilitato',
972 badnode2 => '$_[0] e\' un nodo attivo',
973 badnode3 => 'Lista dei nodi disabilitati:-',
974 bbse1 => 'Per favore inserisci l\'indirizzo del tuo BBS con set/bbs <tuo bbs>',
975 bbs => 'Il tuo BBS e\' ora \"$_[0]\"',
976 beepoff => 'I beep sono disattivati',
977 beepon => 'I beep sono attivati',
978 call1 => 'Ricerca del nominativo via $_[0]:',
979 conother => 'Spiacente $_[0] sei connesso già su un\'altra porta',
980 concluster => 'Spiacente $_[0] sei connesso già alla rete cluster (su $_[1])',
981 conscript => 'nessuno script di connessione chiamato \"$_[0]\" trovato in $main::root/connect',
982 confail => 'connessione a $_[0] fallita ($_[1])',
983 constart => 'connessione a $_[0] iniziata',
984 deluser => 'L\'utente $_[0] e\' stato eliminato',
985 db1 => 'Questo database e\' presso $_[0]',
986 db2 => 'Spiacente, ma la chiave: $_[0] non e\' stata trovata in $_[1]',
987 db3 => 'Spiacente, il database $_[0] non esiste qui',
988 db4 => 'Spiacente, il database $_[0] presso $_[1] non e\' disponibile al momento',
989 db5 => 'Sto accedendo al database remoto presso $_[0]...attendere...',
990 db6 => 'Il database $_[0] esiste già , cancellalo prima',
991 db7 => 'Il database $_[0] e\' stato creato per il nodo remoto $_[1]',
992 db8 => 'Il database $_[0] e\' stato creato localmente',
993 db9 => 'Il database $_[0] e\' stato eliminato',
994 db10 => '$_[0] record importati in $_[1]',
995 db11 => 'Sto inviando le tue richieste a $_[0], attendi...',
996 dfreq1 => 'Frequenza non valida $_[0], deve essere del tipo 0/30000 o hf o hf/cw',
997 dir1 => 'Nessun messaggio trovato',
998 disc1 => 'Disconnesso da $_[0]',
999 disc2 => 'Canalew $_[0] disconnesso',
1000 disc3 => 'Nessun canale, ma la connessione $_[0] disconnessa',
1001 disc4 => 'Nessun canale o connessione ma $_[0] disconnesso',
1003 dup => 'Spiacente, questo e\' un doppione',
1004 dx1 => 'Frequenza $_[0] non nella banda (controlla show/band); sintassi: DX [BY nominativo] freq nominativo commento',
1005 dx2 => 'Serve un nominatico; sintassi: DX [BY nominativo] freq nominativo commento',
1006 dx3 => 'Il nominativo o la frequenza sono errati',
1007 dxs => 'DX Spots attivati alle $_[0]',
1008 dxu => 'DX Spots disattivati alle $_[0]',
1009 e1 => 'Comando errato',
1010 e2 => 'Errore: $_[0]',
1011 e3 => '$_[0]: $_[1] non trovato',
1012 e4 => 'Inserire un prefisso o un nominativo',
1013 e5 => 'Non permesso',
1014 e6 => '*** Nessuna stazione specificata ***',
1015 e7 => 'il nominativo $_[0] non e\' visibile sul cluster',
1016 e8 => 'Inserire un nominativo o del testo',
1017 e9 => 'Inserire del testo',
1018 e10 => '$_[0] non connesso localmente',
1019 e11 => 'Impossibile usare $main:mycall come destinazione',
1020 e12 => 'Inserire il nominativo di un nodo',
1021 e13 => '$_[0] non e\' un nodo',
1022 e14 => 'Il primo argomento deve essere numerico e > 0',
1023 e15 => 'qualificatore non valido \"$_[0]\"',
1024 e16 => 'Il file \"$_[0]\" esiste',
1025 e17 => 'Non usare le parole: @_ qui',
1026 e18 => 'Impossibile connettere $_[0] ($!)',
1027 e19 => 'Carattere non valido nella linea',
1028 e20 => 'separatore $_[0] non riconosciuto',
1029 e21 => '$_[0] non e\' numerico',
1030 e22 => '$_[0] non e\' un nominativo',
1031 e23 => '$_[0] non e\' un intervallo (es 0/30000)',
1032 e24 => 'Spiacente, l\'accesso ad internet non e\' abilitato',
1033 e25 => 'Spiacente il valore deve essere tra $_[0] e $_[1]',
1034 e26 => 'Troppi errori, stai per essere disconnesso',
1035 e27 => '$_[0] non e\' un prefisso numeroco o di nominativo',
1036 e28 => 'Spiacente, devi essere registrato (SP $main::myalias per registrarti)',
1037 e29 => 'E\' necessaria una password',
1039 echoon => 'Echo abilitato',
1040 echooff => 'Echo disabilitato',
1041 echow => '*Echo e\' al momento disabilitato, usa set/echo per abilitarlo',
1042 emaile1 => 'Per favore inserisci il tuo indirizzo email con: set/email <indirizzo>',
1043 emaila => 'Il tuo indirizzo email e\' ora \"$_[0]\"',
1044 email => 'Indirizzo email impostato a: $_[0]',
1045 export1 => 'sintassi: export <num_mess> <nome_file>',
1046 export2 => '$_[3] ha problemi esportando i messaggi da $_[0] a $_[1] ($_[2])',
1047 export3 => '$_[2 ] messaggi esportati da $_[0] a $_[1]',
1048 filter1 => 'Filtro $_[0] aggiornato per $_[1]',
1049 filter2 => 'Chiave sconosciuta per il filtro $_[0]',
1050 filter3 => 'Nessun filtro definito per $_[0]',
1051 filter4 => '$_[0]$_[1] Filtro $_[2] cancellato per $_[3]',
1052 filter5 => 'necessito qualche comando per i filtri...',
1053 filter6 => '$_[0]$_[1] Filtro per $[2] non trovato',
1054 grids => 'DX Grid attivato alle $_[0]',
1055 gridu => 'DX Grid disattivato alle $_[0]',
1056 illcall => 'Spiacente, $_[0] non e\' un nominativo valido',
1057 hasha => '$_[0] già esiste $_[1]',
1058 hashb => '$_[0] aggiunto a $_[1]',
1059 hashc => '$_[0] rimosso da $_[1]',
1060 hashd => '$_[0] non in $_[1]',
1061 hashe => '$_[0] impostato a $_[1]',
1062 helpe1 => 'Aiuto non disponibile, contatta il sysop',
1063 helpe2 => 'Nessun aiuto per $_[0]',
1064 heres => 'Here abilitato per $_[0]',
1065 heade1 => 'Sto usando le coordinate $main::mycall, e\' preferibile impostarle con set/location o set/qra',
1066 hereu => 'Here disattivato per $_[0]',
1067 homebbs => 'Home BBS impostata a: $_[0]',
1068 homenode => 'Home Node impostato a: $_[0]',
1069 hnodee1 => 'Per piacere imposta il tuo Home Node con set/homenode <nominativo_cluster>',
1070 hnodee2 => 'Impostazione dell\'homenode fallita per $_[0]',
1071 hnode => 'Il tuo Homenode e\' adesso \"$_[0]\"',
1072 init1 => 'inizializzaione inviata a $_[0]',
1073 iso => '$_[0] Isolato',
1074 isou => '$_[0] non Isolato',
1075 isoc => '$_[0] creato ed isolato',
1076 isoari => 'c\'e\' una filtro sulla rotta in ingresso per $_[0]; eliminala con clear/route input $_[0] prima',
1077 isoaro => 'c\'e\' una filtro sulla rotta in uscita per $_[0]; eliminala con clear/route $_[0] prima',
1078 isow => '$_[0] e\' isolato; unset/isolate $_[0] prima',
1079 l1 => 'Spiacente $_[0], sei già collegato sun un altro canale',
1080 l2 => 'Benvenuto $_[0] sul Cluster $main::mycall a $main::myqth\nsoftware in uso DXSpider V$main::version build $main::build',
1081 lang => 'La lingua selezionata e\' adesso Italiano',
1082 lange1 => 'set/language <lingua> dove <lingua> e\' una tra ($_[0])',
1083 lange2 => 'impostazione lingua fallita per $_[0]',
1084 lh1 => '$main::data/hop_table.pl non esiste',
1085 loce1 => 'Per piacere inserisci la tua posizione, set/location <latitudine longitudine>',
1086 loce2 => 'Non riconosco \"$_[0]\" come Lat/Long (es 52 20 N 0 16 E)',
1087 loce3 => '$_[0] e\' una locatore QRA, usa: set/qra $_[0]',
1088 loc => 'I tuoi dati Lat/Long sono ora \"$_[0]\"',
1089 lockout => '$_[0] Bloccato',
1090 lockoutc => '$_[0] Creato e bloccato',
1091 lockoutun => '$_[0] Sbloccato',
1092 lockoutuse => 'sintassi: sh/lockout <nominativo>|ALL',
1093 loginu => 'L\'utente $_[0] e\' entrato nel cluster',
1094 logoutu => 'L\'utente $_[0] e\' uscito dal cluster',
1095 loginn => 'Il nodo $_[0] si e\' connesso',
1096 logoutn => 'Il nodo $_[0] si e\' disconnesso',
1097 m1 => 'Inserisci il Soggetto (30 caratteri):',
1098 m2 => 'Copia del messaggio $_[0] spedita a $_[1]',
1099 m3 => 'Spiacente, $_[0] non e\' un destinatario accettabile',
1100 m4 => 'Spiacente, non posso accedere al messaggio $_[0]',
1101 m5 => 'Spiacente, ho bisogno del numero di un messaggio',
1102 m6 => 'Rispondi a: $_[0]',
1103 m7 => 'Soggetto : $_[0]',
1104 m8 => 'Scrivi il messaggio e batti /EX per spedirlo o /ABORT per uscire',
1105 m9 => 'Nuovi messaggi sono arrivati per te',
1106 m10 => 'Messaggio abortito',
1107 m11 => 'Il messaggio $_[0] e\' stato salvato e inviato a $_[1]',
1108 m12 => 'Il messaggio $_[0] e\' stato cancellato',
1109 m13 => 'Il messaggio $_[0] non esiste',
1110 m14 => 'Il messaggio $_[0] e\' stato marcato come spedito a $_[1]',
1111 m15 => 'Il messaggio $_[0] risolta ora non spedito a $_[1]',
1112 m16 => 'Specificare il numero del messaggio',
1113 m17 => 'Spiacente, impossibile spedire messaggi in modo $_[0]',
1114 msg1 => 'Bollettino messo in coda',
1115 msg2 => 'Messaggio messo in coda',
1116 msg3 => 'Msg $_[0]: $_[1] cambiato da $_[2] a $_[3]',
1117 msgu => 'sintassi: msg <comando> <num_mess> dati...',
1118 merge1 => 'Richiesta di merge per gli spot $_[1] e i WWV $_[2] spedita a $_[0]',
1119 moon => 'Localita gg/mm/aaaa Alba Tramonto',
1120 moon_with_azel => 'LocalitÃ
1121 gg/mm/aaaa Alba Tramonto Azim Elev',
1122 mond => 'Monitor disabilitato',
1123 mone => 'Monitor abilitato',
1124 namee1 => 'Per favore inserisci con set/name <nome>',
1125 namee2 => 'Impossibile trovare l\'utente $_[0]!',
1126 name => 'Il tuo nome ora e\' \"$_[0]\"',
1127 nodea => '$_[0] impostato come nodo stile AK1A',
1128 nodeac => '$_[0] creato come nodo stile AK1A',
1129 nodeb => '$_[0] impostato come BBS',
1130 nodebc => '$_[0] creato come BBS',
1131 nodec => '$_[0] impostato come nodo stile CLX',
1132 nodecc => '$_[0] creato come nodo stile CLX',
1133 noder => '$_[0] impostato come nodo stile AR-Cluster',
1134 noderc => '$_[0] creato come nodo stile AR-Cluster',
1135 nodes => '$_[0] impostato come nodo stile DXSpider',
1136 nodesc => '$_[0] creato come nodo stile DXSpider',
1137 nodex => '$_[0] impostato come nodo stile DXNET',
1138 nodexc => '$_[0] creato come nodo stile DXNET',
1139 nodeu => '$_[0] impostato come utente',
1140 nodee1 => 'Non puoi utilizzare questo comando mentre il destinatario ($_[0]) e\' connesso',
1141 notdone => 'Non eseguito',
1142 nothere => 'Spiacente, ma $_[0] non e\' presente al momento, prova più tardi',
1143 obscount => 'Contatore di obsolescenza del ping per $_[0] impostato a $_[1]',
1144 ok => 'Operazione eseguita con successo',
1145 outconn => 'Connessione in corso per $_[0]',
1146 page => 'Premi Invio per continuare, A per annullare ($_[0] linee) >',
1147 pagelth => 'La lunghezza della pagina e\' adesso $_[0]',
1148 passerr => 'sintassi: SET/PASS <password> <nominativo>',
1149 password => 'Password impostata o cambiata per $_[0]',
1150 passwordu => 'Password rimossa per $_[0]',
1151 pingo => 'Ping mandato a $_[0]',
1152 pingi => 'Ping ritornato da $_[0] $_[1] (media $_[2]) secondi',
1153 pinge1 => 'Non puoi far un ping su te stesso!',
1154 pingint => 'Intervallo di ping per $_[0] impostato a $_[1] secondi',
1155 'pos' => 'Dal nominativo: $_[0] Lat: $_[1] Long: $_[2]',
1156 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
1157 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
1158 priv => 'Privilegi cambiati per $_[0]',
1159 prs => 'Prompt impostato a \"$_[0]\"',
1160 pru => 'Prompt reimpostato al predefinito',
1161 prx => '$main::mycall >',
1162 pw0 => 'Inserisci la vecchia password: ',
1163 pw1 => 'Inserisci la nuova password: ',
1164 pw2 => 'Reinserisci la nuova password: ',
1165 pw3 => 'Password modificata',
1166 pw4 => 'Le password sono differenti, password NON cambiata',
1167 qll => 'Per favore inserisci la tua località con set/location o set/qra',
1168 qthe1 => 'Per favore inserisci il tuo QTH con set/qth <qth>',
1169 qth => 'Il tuo QTH e\' adesso \"$_[0]\"',
1170 qrae1 => 'Per favore inserisci il tuo locatore QRA con set/qra <locatore> (es set/qra JM77GF)',
1171 qrashe1 => 'Please enter a QRA locator, eg sh/qra JO02LQ or sh/qra JO02LQ IO93NS',
1172 qrae2 => 'Non riconosco \"$_[0]\" come locatore QRA (es JM77GF)',
1173 qra => 'Il tuo locatore QRA e\' adesso \"$_[0]\"',
1174 rcmdo => 'RCMD \"$_[0]\" spedito a $_[1]',
1175 rec => '$_[0] records',
1176 read1 => 'Spiacente, non ci sono nuovi messaggi per te',
1177 read2 => 'Messaggio $_[0] non trovato',
1178 read3 => 'Messaggio $_[0] non disponibile',
1179 rec => '$_[0] records',
1180 reg => '$_[0] registrato',
1181 regc => '$_[0] creato e registrato',
1182 reginac => 'La registrazione non e\' attiva (set/var \$main::reqreg = 1 per attivarla)',
1183 regun => '$_[0] deregistrato',
1184 route => '$_[0] su $_[1] via $_[2]',
1185 sat1 => 'Tracking Table for $_[0] for the next $_[1] hours every $_[2] mins',
1186 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
1187 sat3 => 'Sintassi: SH/SAT <nome> [<ore> <intervallo>]',
1188 sat4 => 'Satelliti disponibili/Età dei Kepleriani (giorni):-',
1189 sat5 => 'serve nnnnn.AMSAT nel soggetto per caricare i kepleriani dal messaggio',
1190 satnf => 'Satellite $_[0] sconosciuto',
1192 sethop1 => 'sintassi: set/hops <nominativo> ann|spots|wwv|wcy <num di salti>',
1193 sethop2 => '$_[0] salti impostai per $_[1]$_[2] per $_[3]',
1194 sethop3 => 'Nessun salto impostato per $_[0]',
1195 shutting => '$main::mycall si sta arrestando...',
1196 sloc => 'Cluster lat $_[0] long $_[1], Non scordare di camberli nel file DXVars.pm',
1197 snode1 => 'Nodo Nominativo Ordine Versione',
1198 snode2 => '$_[0] $_[1] $_[2]',
1199 snode3 => '$_[0] Nominativo sconosciuto',
1200 sqra => 'Locatore QRA del Cluster$_[0], NON DIMENTICARE DI CAMBIARLO NEL TUO FILE DXVars.pm',
1201 sorry => 'Spiacente',
1202 spf1 => 'spoof: sto creando il nuovo utente $_[0]',
1203 stathf => 'Statistiche HF DX Spot, ultimi 31 giorni',
1204 stathft => 'Statistiche HF DX Spot, ultimi 31 giorni per DXCC $_[0]',
1205 statvhf => 'Statistiche VHF+ DX Spot, ultimi 31 giorni',
1206 statvhft => 'Statistiche VHF+ DX Spot, ultimi 31 days per DXCC $_[0]',
1207 statdx => 'Totale DX Spots degli ultimi 31 giorni',
1208 sun => 'Località gg/mm/aaaa Alba Tramonto',
1209 sun_with_azel => 'LocalitÃ
1210 gg/mm/aaaa Alba Tramonto Azim Elev',
1212 suser1 => 'sintassi: nominatio campo_utente valore',
1213 suser2 => 'Utente $_[0] non trovato',
1214 suser3 => 'Il campo utente \'$_[0]\' era \'$_[1]\' ora e\' impostao a \'$_[2]\'',
1215 suser4 => 'Il campo utente \'$_[0]\' non esiste',
1216 time1 => 'Ora locale: $_[0] $_[1], UTC $_[2]',
1217 time2 => '$_[0] Ora (standard) locale: $_[1] ($_[2] ore)',
1218 time3 => '$_[0] $_[1]',
1219 talks => 'Talk abilitato per $_[0]',
1220 talku => 'Talk disabilitato per $_[0]',
1221 talkend => 'Chiude il la conversazione con te',
1222 talkinst => 'Stai entrando nel modo conversazione, /EX per uscire, /<cmd> per eseguire un comando',
1223 talknh => 'Spiaente $_[0] non e\' collegato al momento',
1224 talkprompt => 'Talk ($_[0])>',
1225 talkstart => 'Inizia una conversazione con te',
1226 unsethop1 => 'sintassi: unset/hops <nominativo> ann|spots|wwv|wcy',
1227 unsethop2 => 'salti eliminati su $_[1] per $_[0]',
1228 usernf => '*** Record utente per $_[0] non trovato ***',
1229 wcy1 => '$_[0] manca o e\' fuori limite',
1230 wcy2 => 'WCY duplicato',
1231 wwv1 => '$_[0] manca o e\' fuori limite',
1232 wwv2 => 'WWV duplicato',
1233 wwvs => 'WWV abilitati per $_[0]',
1234 wwvu => 'WWV disabilitati per $_[0]',
1235 wxs => 'WX abilitati per $_[0]',
1236 wxu => 'WX disabilitati per $_[0]',
1240 addr => 'Adresa nastavena na: $_[0]',
1241 already => '$_[0] je uz pripojen',
1242 anns => 'Ann je povolen pro $_[0]',
1243 annu => 'Ann je zakazan pro $_[0]',
1244 annts => 'AnnTalk je povolen pro $_[0]',
1245 anntu => 'AnnTalk je zakazan pro $_[0]',
1246 badnode1 => '$_[0] je nyni zavadny nod',
1247 badnode2 => '$_[0] je nyni bezvadny nod',
1248 badnode3 => 'Seznam zavadnych nodu:-',
1249 bbse1 => 'Prosim zadej svou BBS adresu, set/bbs <tva bbs adresa>',
1250 bbs => 'Tva BBS adresa je nyni \"$_[0]\"',
1251 beepoff => 'Zvuky jsou nyni vypnuty',
1252 beepon => 'Zvuky jsou nyni zapnuty',
1253 call1 => 'Vyhledani znacky pres $_[0]:',
1254 conother => 'Lituji $_[0], jses na me napojen na jinem portu',
1255 concluster => 'Lituji $_[0], jses uz napojen nekde jinde na clusteru (na $_[1])',
1256 conscript => 'nebyl spusten connect skript \"$_[0]\" nalezen v $main::root/connect',
1257 confail => 'pripojeni na $_[0] selhalo ($_[1])',
1258 constart => 'pripojeni na $_[0] bylo zahajeno',
1259 deluser => 'Uzivatel $_[0] byl smazan',
1260 db1 => 'Tato databaze se nachazi na $_[0]',
1261 db2 => 'Lituji, ale klic $_[0] nebyl nalezen v $_[1]',
1262 db3 => 'Lituji, ale databaze $_[0] se zde nenachazi',
1263 db4 => 'Lituji, databaze $_[0] na $_[1] neni momentalne online',
1264 db5 => 'Pripojuji vzdalenou databazi na $_[0]...cekej...',
1265 db6 => 'Databaze $_[0] uz existuje, nejprve ji smaz',
1266 db7 => 'Databaze $_[0] byla vytvorena pro vzdaleny nod $_[1]',
1267 db8 => 'Databaze $_[0] byla vytvorena lokalne',
1268 db9 => 'Databaze $_[0] byla smazana',
1269 db10 => '$_[0] zaznamu bylo vlozeno do $_[1]',
1270 db11 => 'Posilam tvuj pozadavek do $_[0], prosim cekej...',
1271 dfreq1 => 'Neplatna freq $_[0], potrebuji napr 0/30000 nebo hf nebo hf/cw',
1272 dir1 => 'Zadne zpravy nebyly nalezeny',
1273 disc1 => 'Odpojeno uzivatelem $_[0]',
1274 disc2 => 'Kanal $_[0] odpojen',
1275 disc3 => 'Zadny kanal, ale spojeni $_[0] zruseno',
1276 disc4 => 'Zadny kanal ani spojeni, ale $_[0] byl odpojen',
1278 dup => 'Lituji, toto je duplikat',
1279 dx1 => 'Frekvence $_[0] neni uvnitr pasma (viz show/band); pouziti: DX [BY call] freq call text',
1280 dx2 => 'Potrebuji znacku; pouziti: DX [BY call] freq call text',
1281 dx3 => 'Znacka nebo frekvence je neplatna',
1282 dxs => 'DX spoty jsou povoleny pro $_[0]',
1283 dxu => 'DX spoty jsou zakazany pro $_[0]',
1284 e1 => 'Neplatny prikaz',
1285 e2 => 'Chyba: $_[0]',
1286 e3 => '$_[0]: $_[1] nebylo nalezeno',
1287 e4 => 'Potrebuji alespon prefix nebo znacku',
1288 e5 => 'Neni povoleno',
1289 e6 => '*** Zadna stanice specifikovana ***',
1290 e7 => 'znacka $_[0] neni v clusteru viditelna',
1291 e8 => 'Potrebuji znacku a nejaky text',
1292 e9 => 'Potrebuji alespon nejaky text',
1293 e10 => 'Stanice $_[0] neni pripojena lokalne',
1294 e11 => 'Nemohu pouzit $main:mycall jako cil',
1295 e12 => 'Potrebuji znacku nodu',
1296 e13 => '$_[0] neni nod',
1297 e14 => 'Prvni argument musi byt cislo vetsi nez 0',
1298 e15 => 'neplatny parametr \"$_[0]\"',
1299 e16 => 'Soubor \"$_[0]\" uz existuje',
1300 e17 => 'Prosim nepouzivej zde toto slovo: @_',
1301 e18 => 'Nemohu se pripojit na $_[0] ($!)',
1302 e19 => 'neplatny znak v radku',
1303 e20 => 'retezec $_0] nebyl rozpoznan',
1304 e21 => '$_[0] neni cislo',
1305 e22 => '$_[0] neni znacka',
1306 e23 => '$_[0] neni v rozsahu (napr 0/30000)',
1307 e24 => 'Lituji, pristup na internet neni povolen',
1308 e25 => 'Lituji, hodnota musi byt mezi $_[0] a $_[1]',
1309 e26 => 'Prilis mnoho chyb najednou, jsi odpojovan',
1310 e27 => '$_[0] neni cislo nebo prefix',
1311 e28 => 'Lituji, musis byt registrovan (SP $main::myalias k registraci)',
1312 e29 => 'Potrebuji heslo',
1313 e30 => 'Nemohu otevrit $_[0] $!',
1314 e31 => '$_[0] neni uzivatel',
1315 e32 => 'Potrebuji frazi',
1316 e33 => '$_[0] neni pocet dnu nebo platne datum',
1318 echoon => 'Echo povoleno',
1319 echooff => 'Echo zakazano',
1320 echow => '*Echo je momentalne zakazano, pouzij set/echo k povoleni',
1321 emaile1 => 'Prosim zadej svou e-mailovou adresu, set/email <tva emailova adresa>',
1322 emaila => 'Tva e-mailova adresa je nyni \"$_[0]\"',
1323 email => 'E-mailova adresa je nastavena na: $_[0]',
1324 export1 => 'pouziti: export <cislo zpravy> <soubor>',
1325 export2 => '$_[3] hlasi chyby pri exportu zpravy $_[0] do $_[1] ($_[2])',
1326 export3 => '$_[2 ] exportoval zpravu $_[0] to $_[1]',
1327 filter1 => 'Filtr $_[0] byl zmenen pro for $_[1]',
1328 filter2 => 'Neznamy prikaz filtru $_[0]',
1329 filter3 => 'Nejsou zadne definovane filtry pro $_[0]',
1330 filter4 => '$_[0]$_[1] Filtr $_[2] smazan pro $_[3]',
1331 filter5 => 'potrebuji nejake prikazy filtru...',
1332 filter6 => '$_[0]$_[1] Filtr pro $[2] nebyl nalezen',
1333 grids => 'QRA ctverec byl povolen pro $_[0]',
1334 gridu => 'QRA ctverec byl zakazan pro $_[0]',
1335 illcall => 'Lituji, $_[0] neni platna znacka',
1336 hasha => '$_[0] uz existuje v $_[1]',
1337 hashb => '$_[0] byl pridan do $_[1]',
1338 hashc => '$_[0] byl odstranen z $_[1]',
1339 hashd => '$_[0] neni v $_[1]',
1340 hashe => '$_[0] byl nastaven v $_[1]',
1341 helpe1 => 'Systemova napoveda neni k dispozici, informuj sysopa',
1342 helpe2 => 'Napoveda neni k dispozici k $_[0]',
1343 heres => '$_[0] je pritomen',
1344 heade1 => 'S pouzitim souradnic clusteru, doporucuji zadat set/location nebo set/qra',
1345 hereu => '$_[0] neni pritomen',
1346 homebbs => 'Domaci BBS je nastavena na: $_[0]',
1347 homenode => 'Domaci DXC nod je nastaven na: $_[0]',
1348 hnodee1 => 'Prosim zadej svuj domaci DXC nod, set/homenode <tvuj domaci DX cluster>',
1349 hnodee2 => 'Nastaveni domaciho nodu na $_[0] selhalo',
1350 hnode => 'Tvuj domaci nod je nyni \"$_[0]\"',
1351 init1 => 'vyslana inicializacni zprava do $_[0]',
1352 iso => '$_[0] izolovan',
1353 isou => '$_[0] neni izolovan',
1354 isoc => '$_[0] vytvoren a izolovan',
1355 isoari => 'vstupni route filtr pro $_[0] uz existuje; zadej nejprve clear/route input $_[0]',
1356 isoaro => 'vystupni route filtr pro $_[0] uz existuje; zadej nejprve clear/route $_[0]',
1357 isow => '$_[0] je izolovan; zadej nejprve unset/isolate $_[0]',
1358 l1 => 'Lituji $_[0], uz jsi zalogovan na jinem kanalu',
1359 l2 => 'Ahoj $_[0], toto je $main::mycall, $main::myqth\npouzivajici DXSpider V$main::version build $main::build',
1360 lang => 'Jazyk je nyni nastaven na Cestinu (napoveda zatim v procesu)',
1361 lange1 => 'set/language <lang> kde <lang> je jedno z ($_[0])',
1362 lange2 => 'selhalo nastaveni jazyka na $_[0]',
1363 lh1 => '$main::data/hop_table.pl neexistuje',
1364 loce1 => 'Prosim zadej svou polohu, set/location <sirka delka>',
1365 loce2 => 'Nemohu rozpoznat \"$_[0]\" jako sirka/delka (napr 52 20 N 0 16 E)',
1366 loce3 => '$_[0] je QRA lokator, prosim pouzij: set/qra $_[0]',
1367 loc => 'Tva poloha (sirka/delka) je nyni \"$_[0]\"',
1368 lockout => '$_[0] zamknuto',
1369 lockoutc => '$_[0] vytvoreno a zamknuto',
1370 lockoutun => '$_[0] Odemceno',
1371 lockoutuse => 'pouziti: sh/lockout <znacka>|ALL',
1372 loginu => 'Uzivatel $_[0] prihlasen',
1373 logoutu => 'Uzivatel $_[0] odhlasen',
1374 loginn => 'Nod $_[0] prihlasen',
1375 logoutn => 'Nod $_[0] odhlasen',
1376 m1 => 'Zadej nazev (30 znaku):',
1377 m2 => 'Kopie zpravy $_[0] byla odeslana k $_[1]',
1378 m3 => 'Lituji, $_[0] je neplatna cilova adresa',
1379 m4 => 'Lituji, zprava $_[0] neni dostupna',
1380 m5 => 'Lituji, potrebuji cislo zpravy',
1381 m6 => 'Odpoved na: $_[0]',
1382 m7 => 'Nezev: $_[0]',
1383 m8 => 'Zadej text zpravy /EX pro konec nebo /ABORT k preruseni',
1384 m9 => 'Mas novou zpravu',
1385 m10 => 'Zprava prerusena',
1386 m11 => 'Zprava c. $_[0] ulozena a smerovana na $_[1]',
1387 m12 => 'Zprava c. $_[0] byla smazana',
1388 m13 => 'Zprava c. $_[0] chybi',
1389 m14 => 'Zprava c. $_[0] byla oznacena a zaslana do $_[1]',
1390 m15 => 'Zprava c. $_[0] byla neoznacena a zaslana do $_[1]',
1391 m16 => 'Potrebuji cislo zpravy',
1392 m17 => 'Lituji, nemohu posilat zpravy v modu $_[0]',
1393 m18 => 'Lituji, zprava $_[0] ma momentalne status KEEP',
1394 msg1 => 'Zpravy v rubrikach cekaji ve fronte',
1395 msg2 => 'Privatni zpravy cekaji ve fronte',
1396 msg3 => 'Zprava $_[0]: $_[1] byla zmenena z $_[2] na $_[3]',
1397 msgu => 'pouziti: msg <prikaz> <cislo zpravu> data...',
1398 merge1 => 'Pozadavek na Merge pro $_[1] spotu a $_[2] WWV byl zaslan do $_[0]',
1399 moon => 'Poloha dd/mm/yyyy Vychod Zapad',
1400 moon_with_azel => 'Poloha dd/mm/yyyy Vychod Zapad Azim Elev',
1401 mond => 'Monitoring je zakazan',
1402 mone => 'Monitoring je povolen',
1403 namee1 => 'Prosim zadej sve jmeno, set/name <tve jmeno>',
1404 namee2 => 'Nemohu najit uzivatele $_[0]!',
1405 name => 'Tve jmeno je nyni \"$_[0]\"',
1406 nodea => '$_[0] nastaven jako nod typu AK1A',
1407 nodeac => '$_[0] vytvoren jako nod typu AK1A',
1408 nodeb => '$_[0] nastaven jako BBS',
1409 nodebc => '$_[0] vytvoren jako BBS',
1410 nodec => '$_[0] nastaven jako nod typu CLX',
1411 nodecc => '$_[0] vytvoren jako nod typu CLX',
1412 noder => '$_[0] nastaven jako nod typu AR-Cluster',
1413 noderc => '$_[0] vytvoren jako nod typu AR-Cluster',
1414 nodes => '$_[0] nastaven jako nod typu DXSpider',
1415 nodesc => '$_[0] vytvoren jako nod typu DXSpider',
1416 nodex => '$_[0] nastaven jako nod typu DXNET',
1417 nodexc => '$_[0] vytvoren jako nod typu DXNET',
1418 nodeu => '$_[0] nastaven opet jako uzivatel',
1419 nodee1 => 'Nemuzes pouzit tento prikaz zatimco tvuj cil ($_[0]) je on-line',
1420 notdone => 'NEBYLO provedeno',
1421 nothere => 'Lituji, ale $_[0] neni momentalne zde, zkus to pozdeji',
1422 obscount => 'Pocatecni hodnota Ping citace nodu $_[0] byla nastavena na $_[1]',
1423 ok => 'Operace byla uspesna',
1424 outconn => 'Zbyvajici spojeni na $_[0]',
1425 page => 'Stiskni Enter pro pokracovani, A k preruseni ($_[0] radku) >',
1426 pagelth => 'Delka stranky je nyni $_[0]',
1427 passerr => 'Prosim pouzij: SET/PASS <heslo> <znacka>',
1428 passphrase => 'Fraze byla nastavena nebo zmenena pro $_[0]',
1429 passphraseu => 'Fraze byla odstranena pro $_[0]',
1430 password => 'Heslo bylo nastaveno nebo zmeneno pro $_[0]',
1431 passwordu => 'Heslo bylo odstraneno pro $_[0]',
1432 pc90s => 'PC90 bylo povoleno pro $_[0]',
1433 pc90u => 'PC90 bylo zakazano $_[0]',
1434 pingo => 'Ping byl zaslan na $_[0]',
1435 pingi => 'Ping se vratil od $_[0] $_[1] (Prum $_[2]) sekundy',
1436 pinge1 => 'Nemuzu pingnout sam sebe!',
1437 pingint => 'Ping interval na $_[0] byl nastaven na $_[1] sekundy',
1438 'pos' => 'Od znacky: $_[0] Sirka: $_[1] Delka: $_[2]',
1439 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
1440 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
1441 prs => 'Prompt byl nastaven na \"$_[0]\"',
1442 pru => 'Prompt byl vracen na default',
1443 priv => 'Uroven prav byla zmenena na $_[0]',
1444 prx => '$main::mycall >',
1445 pw0 => 'Zadej stare heslo: ',
1446 pw1 => 'Zadej nove heslo: ',
1447 pw2 => 'Zadej znovu nove heslo: ',
1448 pw3 => 'Heslo bylo zmeneno',
1449 pw4 => 'Hesla se lisi, heslo NEBYLO zmeneno',
1450 qll => 'Prpsim zadej svou polohu s pomoci set/location nebo set/qra',
1451 qthe1 => 'Prosim zadej sve QTH, set/qth <tve QTH>',
1452 qth => 'Tve QTH je nyni \"$_[0]\"',
1453 qrae1 => 'Prosim zadej svuj QRA lokator, set/qra <qra lokator> (napr set/qra JN79FM)',
1454 qrashe1 => 'Prosim zadej QRA locator, napr sh/qra JN79FM nebo sh/qra JN79FM JN63GV',
1455 qrae2 => 'Nerozpoznal jsem \"$_[0]\" jako QRA lokator (napr JN79FM)',
1456 qra => 'Tvuj QRA lokator je nyni \"$_[0]\"',
1457 rcmdo => 'RCMD \"$_[0]\" bylo zaslano do $_[1]',
1458 read1 => 'Lituji, nemas zadne nove zpravy',
1459 read2 => 'Zprava $_[0] nenalezena',
1460 read3 => 'Msg $_[0] neni k dispozici',
1461 rec => '$_[0] zaznamu',
1462 reg => '$_[0] registrovano',
1463 regc => '$_[0] vytvoreno a registrovano',
1464 reginac => 'Registrace neni aktivni (set/var \$main::reqreg = 1 k aktivaci)',
1465 regun => '$_[0] neregistrovano',
1466 route => '$_[0] na $_[1] via $_[2]',
1467 sat1 => 'Tabulka pro $_[0] pro nasledujicich $_[1] hodin s intervalem $_[2] min',
1468 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Vzdal Km',
1469 sat3 => 'Syntaxe: SH/SAT <jmeno> [<hodin> <interval>]',
1470 sat4 => 'Druzice k dispozici/Stari Kepl. elem (dny):-',
1471 sat5 => 'potrebuji nnnnn.AMSAT v nazvu ke stazeni keps z teto zpravy',
1472 satnf => 'Druzice $_[0] je neznama',
1474 set => '$_[0] povoleno pro $_[1]',
1475 sethop1 => 'pouziti: set/hops <znacka> ann|spots|wwv|wcy <pocet skoku>',
1476 sethop2 => '$_[0] skoku nastaveno na $_[1]$_[2] pro $_[3]',
1477 sethop3 => 'Zadny pocet skoku nastaven pro $_[0]',
1478 shu => '\"SHU\" nestaci, je treba alespon \"SHUT\" k vypnuti nodu',
1479 shutting => '$main::mycall se vypina...',
1480 sloc => 'Cluster lat $_[0] long $_[1], NEZAPOMEN ZMENIT DXVars.pm',
1481 snode1 => 'Nod Znacka Typ Verze ',
1482 snode2 => '$_[0] $_[1] $_[2]',
1483 snode3 => '$_[0] Neznama znacka',
1484 sqra => 'Cluster QRA Lokator$_[0], NEZAPOMEN ZMENIT DXVars.pm',
1486 spf1 => 'spoof: vytvarim noveho uzivatele $_[0]',
1487 stathf => 'HF DX Spot Stats, poslednich $_[1] dni pocinaje $_[0]',
1488 stathft => 'HF DX Spot Stats, poslednich $_[2] dni pocinaje $_[1] pro DXCC $_[0]',
1489 statvhf => 'VHF+ DX Spot Stats, poslednich $_[1] dni pocinaje $_[0]',
1490 statvhft => 'VHF+ DX Spot Stats, poslednich $_[2] dni pocinaje $_[1] pro DXCC $_[0]',
1491 statdx => 'Prehled DX Spotu pro $_[1] dni pocinaje $_[0]',
1492 sun => 'Poloha dd/mm/yyyy Vychod Zapad',
1493 sun_with_azel => 'Poloha dd/mm/yyyy Vychod Zapad Azim Elev',
1494 susdb1 => 'pouziti: znacka stat mesto',
1495 susdb2 => 'USDB $_[0] bylo $_[1], $_[2]',
1496 susdb3 => 'USDB $_[0] je nyni $_[1], $_[2]',
1497 susdb4 => 'USDB $_[0] smazano',
1498 suser1 => 'pouziti: znacka jmeno_uzivatele hodnota',
1499 suser2 => 'User $_[0] nebylo nalezeno',
1500 suser3 => 'User field \'$_[0]\' bylo \'$_[1]\' nyni nastaveno na \'$_[2]\'',
1501 suser4 => 'Jmeno uzivatele \'$_[0]\' neexistuje',
1502 time1 => 'Lokalni cas: $_[0] $_[1], UTC $_[2]',
1503 time2 => '$_[0] Lokalni (standardni) cas: $_[1] ($_[2] hodin)',
1504 time3 => '$_[0] $_[1]',
1505 talks => 'Talk povolen pro $_[0]',
1506 talku => 'Talk zakazan pro $_[0]',
1507 talkend => 'Skoncil spolecnou konverzaci',
1508 talkinst => 'Vstupuji do konverzacniho modu, /EX pro skonceni, /<paikaz> ke spusteni prikazu',
1509 talknh => 'Lituji, $_[0] neni momentalne online',
1510 talkprompt => 'Talk ($_[0])>',
1511 talkstart => 'Zahajil spolecnou konverzaci',
1512 unset => '$_[0] zakazano pro for $_[1]',
1513 unsethop1 => 'pouziti: unset/hops <znacka> ann|spots|wwv|wcy',
1514 unsethop2 => 'pocet skoku neni nastaven na $_[1] pro $_[0]',
1515 usernf => '*** Uzivatelsky zaznam pro $_[0] nebyl nalezen ***',
1516 wcy1 => '$_[0] bud chybi nebo je mimo rozsah',
1517 wcy2 => 'Duplicitni WCY',
1518 wcys => 'WCY je povoleno pro $_[0]',
1519 wcyu => 'WCY je zakazano pro $_[0]',
1520 wwv1 => '$_[0] bud chybi nebo je mimo rozsah',
1521 wwv2 => 'Duplicitni WWV',
1522 wwvs => 'WWV je povoleno pro $_[0]',
1523 wwvu => 'WWV je zakazano pro $_[0]',
1524 wxs => 'WX je povoleno pro $_[0]',
1525 wxu => 'WX je zakazano pro $_[0]',