3 # this file contains the system messages. Don't forget to reload them
4 # if you change them (load/messages)
13 addr => 'Address set to: $_[0]',
14 already => '$_[0] already connnected',
15 anns => 'Announce flag set on $_[0]',
16 annu => 'Announce flag unset on $_[0]',
17 bbse1 => 'Please enter your BBS address,, set/bbs <your bbs address>',
18 bbs => 'Your BBS Address is now \"$_[0]\"',
19 beepoff => 'Beeps are now off',
20 beepon => 'Beeps are now on',
21 conother => 'Sorry $_[0] you are connected on another port',
22 concluster => 'Sorry $_[0] you are already connected elsewhere on the cluster',
23 conscript => 'no connect script called \"$_[0]\" found in $main::root/connect',
24 confail => 'connection to $_[0] failed ($_[1])',
25 constart => 'connection to $_[0] started',
26 disc1 => 'Disconnected by $_[0]',
27 disc2 => '$_[0] disconnected',
28 db1 => 'This database is hosted at $_[0]',
29 db2 => 'Sorry, but key: $_[0] was not found in $_[1]',
30 db3 => 'Sorry, database $_[0] doesn\'t exist here',
31 db4 => 'Sorry, database $_[0] located at $_[1] isn\'t currently online',
32 db5 => 'Accessing remote database on $_[0]...standby...',
33 db6 => 'Database $_[0] already exists, delete it first',
34 db7 => 'Database $_[0] created for remote node $_[1]',
35 db8 => 'Database $_[0] created locally',
36 db9 => 'Database $_[0] removed',
37 db10 => '$_[0] records imported into $_[1]',
38 db11 => 'Sending your request(s) to $_[0], please stand by...',
39 dup => 'Sorry, this is a duplicate',
40 dx1 => 'Frequency $_[0] not in band (see show/band); usage: DX [BY call] freq call comments',
41 dx2 => 'Need a callsign; usage: DX [BY call] freq call comments',
42 dxs => 'DX Spots flag set on $_[0]',
43 dxu => 'DX Spots flag unset on $_[0]',
44 e1 => 'Invalid command',
46 e3 => '$_[0]: $_[1] not found',
47 e4 => 'Need at least a prefix or callsign',
49 e6 => '*** No station specified ***',
50 e7 => 'callsign $_[0] not visible on the cluster',
51 e8 => 'Need a callsign and some text',
52 e9 => 'Need at least some text',
53 e10 => '$_[0] not connected locally',
54 e11 => 'Can\'t use $main:mycall as target',
55 e12 => 'Need a node callsign',
56 e13 => '$_[0] is not a node',
57 e14 => 'First argument must be numeric and > 0',
58 e15 => 'invalid qualifier \"$_[0]\"',
59 e16 => 'File \"$_[0]\" exists',
61 echoon => 'Echoing enabled',
62 echooff => 'Echoing disabled',
63 emaile1 => 'Please enter your email address, set/email <your e-mail address>',
64 emaila => 'Your E-Mail Address is now \"$_[0]\"',
65 email => 'E-mail address set to: $_[0]',
66 export1 => 'usage: export <msgno> <filename>',
67 export2 => '$_[3] has error exporting msg $_[0] to $_[1] ($_[2])',
68 export3 => '$_[2 ] exported msg $_[0] to $_[1]',
69 helpe1 => 'Help system unavailable, tell sysop',
70 helpe2 => 'No help available on $_[0]',
71 heres => 'Here set on $_[0]',
72 heade1 => 'Using $main::mycall Coords, consider doing a set/location or set/qra',
73 hereu => 'Here unset on $_[0]',
74 homebbs => 'Home BBS set to: $_[0]',
75 homenode => 'Home Node set to: $_[0]',
76 hnodee1 => 'Please enter your Home Node, set/homenode <your home DX Cluster>',
77 hnodee2 => 'Failed to set homenode on $_[0]',
78 hnode => 'Your Homenode is now \"$_[0]\"',
79 init1 => 'sent initialisation message to $_[0]',
80 iso => '$_[0] Isolated',
81 isou => '$_[0] UnIsolated',
82 isoc => '$_[0] created and Isolated',
83 l1 => 'Sorry $_[0], you are already logged on on another channel',
84 l2 => 'Hello $_[0], this is $main::mycall in $main::myqth running DXSpider V$main::version',
85 lang => 'Language is now $_[0]',
86 lange1 => 'set/language <lang> where <lang> is one of ($_[0])',
87 lange2 => 'failed to set language on $_[0]',
88 lh1 => '$main::data/hop_table.pl doesn\'t exist',
89 loce1 => 'Please enter your location,, set/location <latitude longitude>',
90 loce2 => 'Don\'t recognise \"$_[0]\" as a Lat/Long (eg 52 20 N 0 16 E)',
91 loc => 'Your Lat/Long is now \"$_[0]\"',
92 lockout => '$_[0] Locked out',
93 lockoutc => '$_[0] Created and Locked out',
94 lockoutun => '$_[0] Unlocked',
95 loginu => 'User $_[0] has logged in',
96 logoutu => 'User $_[0] has logged out',
97 loginn => 'Node $_[0] has logged in',
98 logoutn => 'Node $_[0] has logged out',
99 m1 => 'Enter Subject (30 characters):',
100 m2 => 'Copy of msg $_[0] sent to $_[1]',
101 m3 => 'Sorry, $_[0] is an unacceptable TO address',
102 m4 => 'Sorry, can\'t access message $_[0]',
103 m5 => 'Sorry, I need a message number',
104 m6 => 'Reply to: $_[0]',
105 m7 => 'Subject : $_[0]',
106 m8 => 'Enter Message /EX to send or /ABORT to exit',
107 m9 => 'New mail has arrived for you',
108 m10 => 'Message Aborted',
109 m11 => 'Message no $_[0] saved and directed to $_[1]',
110 m12 => 'Message no $_[0] deleted',
111 m13 => 'Message no $_[0] missing',
112 m14 => 'Message no $_[0] marked as sent to $_[1]',
113 m15 => 'Message no $_[0] unmarked as sent to $_[1]',
114 m16 => 'Need a Message number',
115 msg1 => 'Bulletin Messages Queued',
116 msg2 => 'Private Messages Queued',
117 msg3 => 'Msg $_[0]: $_[1] changed from $_[2] to $_[3]',
118 msgu => 'usage: msg <cmd> <msgno> data...',
119 merge1 => 'Merge request for $_[1] spots and $_[2] WWV sent to $_[0]',
120 moon => 'Location Rise Set Azim Elev RGain dB',
121 namee1 => 'Please enter your name, set/name <your name>',
122 namee2 => 'Can\'t find user $_[0]!',
123 name => 'Your name is now \"$_[0]\"',
124 node => '$_[0] set as AK1A style Node',
125 nodec => '$_[0] created as AK1A style Node',
126 nodes => '$_[0] set as DXSpider style Node',
127 nodesc => '$_[0] created as DXSpider style Node',
128 nodeu => '$_[0] set back as a User',
129 nodee1 => 'You cannot use this command whilst your target ($_[0]) is on-line',
130 ok => 'Operation successful',
131 outconn => 'Outstanding connect to $_[0]',
132 page => 'Press Enter to continue, A to abort ($_[0] lines) >',
133 pagelth => 'Page Length is now $_[0]',
134 passerr => 'Please use: SET/PASS <password> <callsign>',
135 password => 'Password set or changed for $_[0]',
136 pingo => 'Ping Started to $_[0]',
137 pingi => 'Ping Returned from $_[0] $_[1] (Ave $_[2]) secs',
138 pinge1 => 'Cannot ping yourself!',
139 pingint => 'Ping interval on $_[0] set to $_[1] secs',
140 pos => 'From Callsign: $_[0] Lat: $_[1] Long: $_[2]',
141 pr => '$_[0] de $main::mycall $main::cldate $main::ztime >',
142 pr2 => '($_[0]) de $main::mycall $main::cldate $main::ztime >',
143 priv => 'Privilege level changed on $_[0]',
144 prx => '$main::mycall >',
145 qll => 'Please enter your location with set/location or set/qra',
146 qthe1 => 'Please enter your QTH, set/qth <your qth>',
147 qth => 'Your QTH is now \"$_[0]\"',
148 qrae1 => 'Please enter your QRA locator, set/qra <qra locator> (eg set/qra JO02LQ)',
149 qrashe1 => 'Please enter a QRA locator, eg sh/qra JO02LQ or sh/qra JO02LQ IO93NS',
150 qrae2 => 'Don\'t recognise \"$_[0]\" as a QRA locator (eg JO02LQ)',
151 qra => 'Your QRA Locator is now \"$_[0]\"',
152 rcmdo => 'RCMD \"$_[0]\" sent to $_[1]',
153 read1 => 'Sorry, no new messages for you',
154 read2 => 'Msg $_[0] not found',
155 read3 => 'Msg $_[0] not available',
156 sat1 => 'Tracking Table for $_[0] for the next $_[1] hours every $_[2] mins',
157 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
158 sat3 => 'Syntax: SH/SAT <name> [<hours> <interval>]',
159 sat4 => 'Satellites available:-',
160 satnf => 'Satellite $_[0] unknown',
162 shutting => '$main::mycall shutting down...',
163 sloc => 'Cluster lat $_[0] long $_[1], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
164 snode1 => 'Node Call Sort Version',
165 snode2 => '$_[0] $_[1] $_[2]',
166 snode3 => '$_[0] Unknown Call',
167 sqra => 'Cluster QRA Locator$_[0], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
169 spf1 => 'spoof: creating new user $_[0]',
170 sun => 'Location Rise Set Azim Elev',
171 suser1 => 'usage: callsign user_field_name value',
172 suser2 => 'User $_[0] not found',
173 suser3 => 'User field \'$_[0]\' was \'$_[1]\' now set to \'$_[2]\'',
174 suser4 => 'User field name \'$_[0]\' doesn\'t exist',
175 time1 => 'Local Time: $_[0] $_[1], UTC $_[2]',
176 time2 => '$_[0] Local (standard) time: $_[1] ($_[2] Hours)',
177 time3 => '$_[0] $_[1]',
178 talks => 'Talk flag set on $_[0]',
179 talku => 'Talk flag unset on $_[0]',
180 usernf => '*** User record for $_[0] not found ***',
181 wwvs => 'WWV flag set on $_[0]',
182 wwvu => 'WWV flag unset on $_[0]',
183 wxs => 'WX flag set on $_[0]',
184 wxu => 'WX flag unset on $_[0]',
187 addr => 'Addres gezet op: $_[0]',
188 already => '$_[0] reeds geconnect',
189 anns => 'Announce berichten AAN gezet voor $_[0]',
190 annu => 'Announce berichten UIT gezet voor $_[0]',
191 bbse1 => 'Geef je home bbs (mailbox),, set/bbs <home mailbox>',
192 bbs => 'Je home bbs (mailbox) is nu \"$_[0]\"',
193 beepoff => 'De beep staat nu UIT',
194 beepon => 'De beep staat nu AAN',
195 conother => 'Sorry $_[0] je bent reeds geconnect op een andere poort',
196 concluster => 'Sorry $_[0] je bent reeds op een ander cluster geconnect',
197 conscript => 'Geen connectscript aangeroepen \"$_[0]\" gevonden in $main::root/connect',
198 confail => 'Verbinding met $_[0] mislukt ($_[1])',
199 constart => 'Verbinding met $_[0] gestart',
200 disc1 => 'Gedisconnect door $_[0]',
201 disc2 => '$_[0] gedisconnect',
202 dx1 => 'Frequentie $_[0] valt niet binnen een band [Opdracht: DX freq call commentaar](Zie sh/band)',
203 dx2 => 'Ik heb een call nodig! [Opdracht: DX freq call commentaar]',
204 dxs => 'DX Spots worden WEL doorgegeven aan $_[0]',
205 dxu => 'DX Spots worden NIET doorgegeven aan $_[0]',
206 e1 => 'Ongeldige opdracht',
208 e3 => '$_[0]: $_[1] niet gevonden',
209 e4 => 'Minimaal een prefix of een call nodig',
210 e5 => 'Niet toegestaan',
211 e6 => '*** Geen station gespecifiseerd ***',
212 e7 => 'Callsign $_[0] is niet zichtbaar op het cluster',
213 e8 => 'Ik heb een call en tekst nodig',
214 e9 => 'Ik heb wel tekst nodig voor een announce!',
215 e10 => '$_[0] is niet lokaal verbonden',
216 e12 => 'Ik heb een node call nodig',
217 e13 => '$_[0] is geen node',
218 emaile1 => 'Geef uw E-mail addres, set/email <uw e-mail addres>',
219 emaila => 'Uw E-Mail addres is nu \"$_[0]\"',
220 email => 'E-mail addres gezet op: $_[0]',
221 helpe1 => 'Help systeem niet beschikbaar, meld dit aan de sysop',
222 helpe2 => 'Geen help beschikbaar over \"$_[0]\"',
223 heres => 'Aanwezigheid AAN gezet voor $_[0]',
224 heade1 => 'Gebruik gemaakt van de $main::mycall coordinaten, overweeg een set/location of set/qra',
225 hereu => 'Aanwezigheid UIT gezet voor $_[0]',
226 homebbs => 'Uw Home mailbox is nu $_[0]',
227 homenode => 'Uw (Home) DX-Cluster is : $_[0]',
228 hnodee1 => 'Geef mij uw lokale (home) DX-cluster, set/homenode <DX-cluster>',
229 hnode => 'Uw (home) DX-cluster is nu \"$_[0]\"',
230 iso => '$_[0] is geisoleerd (Isolated)',
231 isou => '$_[0] is niet meer geisoleerd (UnIsolated)',
232 isoc => '$_[0] gecreerd en geisoleerd (Isolated)',
233 l1 => 'Sorry $_[0], u bent reeds op een ander kanaal ingelogt',
234 l2 => 'Hallo $_[0], dit is $main::mycall in $main::myqth met DXSpider V$main::version',
235 lh1 => '$main::data/hop_table.pl bestaat niet',
236 loce1 => 'Geef uw coordinaten met, set/location <latitude longitude>',
237 loce2 => 'Herken \"$_[0]\" niet als Lat/Long (vb 52 20 N 0 16 E)',
238 loc => 'Uw Latitude en Longitude zijn nu \"$_[0]\"',
239 lockout => '$_[0] heeft geen toegang meer (Locked out)',
240 lockoutun => '$_[0] heeft wederom toegang (Unlocked)',
241 m2 => '$_[0] Informatie: $_[1]',
242 merge1 => 'Merge verzoek voor $_[1] spots en $_[2] WWV verzonden naar $_[0]',
243 msgnew => 'Er is nieuwe post gearriveerd voor u',
244 namee1 => 'Geef aub uw naam met, set/name <uw naam>',
245 namee2 => 'Gebruiker $_[0] niet te vinden!',
246 name => 'Uw naam is gezet op \"$_[0]\"',
247 node => '$_[0] gezet als een AK1A stijl DX-cluster',
248 nodeu => '$_[0] teruggezet naar gebruiker status',
249 nodec => '$_[0] gecreeerd als AK1A stijl DX-cluster',
250 nodee1 => 'U kunt deze opdracht niet uitvoeren zolang ($_[0]) on-line is',
251 ok => 'Opdracht succesvol uitgevoerd',
252 page => 'Druk op Enter om door te gaan, A om af te breken (nog $_[0] regels) >',
253 pagelth => 'Paginalengte gezet op ($_[0]) regels',
254 passerr => 'Gebruik: SET/PASS <wachtwoord> <call>',
255 password => 'Wachtwoord gezet of gewijzigd voor $_[0]',
256 pingo => 'Ping gestart naar $_[0]',
257 pingi => 'Ping ontvangen van $_[0] $_[1] (Ave $_[2]) secs',
258 pr => '$_[0] de $main::mycall $main::cldate $main::ztime >',
259 pr2 => '($_[0]) de $main::mycall $main::cldate $main::ztime >',
260 priv => 'Privilege level gewijzigd op $_[0]',
261 prx => '$main::mycall >',
262 qll => 'Geef uw locator met set/location of set/qra',
263 qthe1 => 'Geef uw woonplaats met, set/qth <woonplaats>',
264 qth => 'Uw QTH is nu \"$_[0]\"',
265 qrae1 => 'Geef uw QRA locator, set/qra <qra locator> (vb set/qra JO33FD)',
266 qrashe1 => 'Geef uw QRA locator, vbg sh/qra JO33FD of sh/qra JO33FD IO93NS',
267 qrae2 => 'Ik herken \"$_[0]\" niet als een QRA locator (vb JO33FD)',
268 qra => 'Uw QRA Locator is nu \"$_[0]\"',
269 rcmdo => 'RCMD \"$_[0]\" verzonden naar $_[1]',
270 read1 => 'Sorry, geen berichten voor u',
271 read2 => 'Bericht $_[0] niet gevonden',
272 read3 => 'Bericht $_[0] niet beschikbaar',
273 shutting => '$main::mycall gaat QRT...',
274 sloc => 'Cluster lat $_[0] long $_[1], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
275 sqra => 'Cluster QRA Locator$_[0], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
276 talks => 'Talk berichten AAN gezet voor $_[0]',
277 talku => 'Talk berichten UIT gezet voor $_[0]',
278 usernf => '*** Gebruiker info van $_[0] niet gevonden ***',
279 wwvs => 'WWV berichten AAN gezet voor $_[0]',
280 wwvu => 'WWV berichten UIT gezet voor $_[0]',
281 wxs => 'WX berichten AAN gezet voor $_[0]',
282 wxu => 'WX berichten UIT gezet voor $_[0]',