+=== 0^ACCEPT/ANNOUNCE [0-9] <pattern>^Set an 'accept' filter line for announce
+Create an 'accept this announce' line for a filter.
+
+An accept filter line means that if the announce matches this filter it is
+passed onto the user. See HELP FILTERING for more info. Please read this
+to understand how filters work - it will save a lot of grief later on.
+
+You can use any of the following things in this line:-
+
+ info <string> eg: iota or qsl
+ by <prefixes> eg: G,M,2
+ origin <prefixes>
+ origin_dxcc <prefixes or numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <prefixes or numbers> or: G,GM,GW
+ origin_zone <prefixes or numbers>
+ by_dxcc <prefixes or numbers>
+ by_itu <prefixes or numbers>
+ by_zone <prefixes or numbers>
+ channel <prefixes>
+ wx 1 filter WX announces
+ dest <prefixes> eg: 6MUK,WDX (distros)
+
+some examples:-
+
+ acc/ann dest 6MUK
+ acc/ann 2 by_zone 14,15,16
+ (this could be all on one line: acc/ann dest 6MUK or by_zone 14,15,16)
+or
+ acc/ann by G,M,2
+
+You can use the tag 'all' to accept everything eg:
+
+ acc/ann all
+
+but this probably for advanced users...
+
+=== 8^ACCEPT/ANNOUNCE <call> [input] [0-9] <pattern>^Announce filter sysop version
+This version allows a sysop to set a filter for a callsign as well as the
+default for nodes and users eg:-
+
+ accept/ann by G,M,2
+ accept/ann input node_default by G,M,2
+ accept/ann user_default by G,M,2
+
+=== 8^ACCEPT/ROUTE <call> [0-9] <pattern>^Set an 'accept' filter line for routing
+Create an 'accept this routing PC Protocol' line for a filter.
+
+An accept filter line means that if a PC16/17/19/21/24/41/50 matches this filter
+it is passed thru that interface. See HELP FILTERING for more info. Please read this
+to understand how filters work - it will save a lot of grief later on.
+
+You can use any of the following things in this line:-
+
+ call <prefixes> the callsign of the thingy
+ call_dxcc <prefixes or numbers> eg: 61,62 (from eg: sh/pre G)
+ call_itu <prefixes or numbers> or: G,GM,GW
+ call_zone <prefixes or numbers>
+ origin <prefixes> really the interface it came in on
+ origin_dxcc <prefixes or numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <prefixes or numbers> or: G,GM,GW
+ origin_zone <prefixes or numbers>
+
+some examples:-
+
+ acc/route gb7djk call_dxcc 61,38 (send only UK+EIRE nodes)
+ acc/route gb7djk call gb7djk (equiv to SET/ISOLATE)
+
+You can use the tag 'all' to accept everything eg:
+
+ acc/route all
+
+
+=== 0^ACCEPT/SPOTS [0-9] <pattern>^Set an 'accept' filter line for spots
+Create an 'accept this spot' line for a filter.
+
+An accept filter line means that if the spot matches this filter it is
+passed onto the user. See HELP FILTERING for more info. Please read this
+to understand how filters work - it will save a lot of grief later on.
+
+You can use any of the following things in this line:-
+
+ freq <range> eg: 0/30000 or hf or hf/cw or 6m,4m,2m
+ on <range> same as 'freq'
+ call <prefixes> eg: G,PA,HB9
+ info <string> eg: iota or qsl
+ by <prefixes>
+ call_dxcc <prefixes or numbers> eg: 61,62 (from eg: sh/pre G)
+ call_itu <prefixes or numbers> or: G,GM,GW
+ call_zone <prefixes or numbers>
+ by_dxcc <prefixes or numbers>
+ by_itu <prefixes or numbers>
+ by_zone <prefixes or numbers>
+ origin <prefixes>
+ channel <prefixes>
+
+For frequencies, you can use any of the band names defined in
+SHOW/BANDS and you can use a subband name like: cw, rtty, data, ssb -
+thus: hf/ssb. You can also just have a simple range like: 0/30000 -
+this is more efficient than saying simply: freq HF (but don't get
+too hung up about that)
+
+some examples:-
+
+ acc/spot 1 on hf/cw
+ acc/spot 2 on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
+
+You can use the tag 'all' to accept everything, eg:
+
+ acc/spot 3 all
+
+but this probably for advanced users...
+
+
+=== 8^ACCEPT/SPOTS <call> [input] [0-9] <pattern>^Spot filter sysop version
+This version allows a sysop to set a filter for a callsign as well as the
+default for nodes and users eg:-
+
+ accept/spot db0sue-7 1 by_zone 14,15,16
+ accept/spot node_default all
+ set/hops node_default 10
+
+ accept/spot user_default by G,M,2
+
+=== 0^ACCEPT/WCY [0-9] <pattern>^set an 'accept' WCY filter
+It is unlikely that you will want to do this, but if you do then you can
+filter on the following fields:-
+
+ by <prefixes> eg: G,M,2
+ origin <prefixes>
+ origin_dxcc <prefixes or numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <prefixes or numbers> or: G,GM,GW
+ origin_zone <prefixes or numbers>
+ by_dxcc <prefixes or numbers>
+ by_itu <prefixes or numbers>
+ by_zone <prefixes or numbers>
+ channel <prefixes>
+
+There are no examples because WCY Broadcasts only come from one place and
+you either want them or not (see UNSET/WCY if you don't want them).
+
+This command is really provided for future use.
+
+See HELP FILTER for information.
+
+=== 8^ACCEPT/WCY <call> [input] [0-9] <pattern>^WCY filter sysop version
+This version allows a sysop to set a filter for a callsign as well as the
+default for nodes and users eg:-
+
+ accept/wcy node_default all
+ set/hops node_default 10
+
+=== 0^ACCEPT/WWV [0-9] <pattern>^set an 'accept' WWV filter
+It is unlikely that you will want to do this, but if you do then you can
+filter on the following fields:-
+
+ by <prefixes> eg: G,M,2
+ origin <prefixes>
+ origin_dxcc <prefixes or numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <prefixes or numbers> or: G,GM,GW
+ origin_zone <prefixes or numbers>
+ by_dxcc <prefixes or numbers>
+ by_itu <prefixes or numbers>
+ by_zone <prefixes or numbers>
+ channel <prefixes>
+
+for example
+
+ accept/wwv by_zone 4
+
+is probably the only useful thing to do (which will only show WWV broadcasts
+by stations in the US).
+
+See HELP FILTER for information.
+
+=== 8^ACCEPT/WWV <call> [input] [0-9] <pattern>^WWV filter sysop version
+This version allows a sysop to set a filter for a callsign as well as the
+default for nodes and users eg:-
+
+ accept/wwv db0sue-7 1 by_zone 4
+ accept/wwv node_default all
+ set/hops node_default 10
+
+ accept/wwv user_default by W,K
+