-<P>As mentioned in the introduction, a default setting exists. If this is
-all you want to use then that is fine, you have nothing else to do.
-However, if you want to make any alterations then you need to know
-a bit about filters.
-<P>
-<P>It is possible to reset the default setting for node connections should
-you wish to do so, however this can be dangerous to the network unless
-you have some experience in how all this works.... be careful! It is
-also possible to change settings for one connection only. You can,
-therefore, have many different filters set dependent on the amount of
-node links you have.
-<P>
+<P>Initially when route filters were being tested we generated a
+"default" filter. Unfortunately it quickly became apparent that this
+might suit the UK cluster network but didn't really fit anybody else.
+However using a default filter is an appropriate thing to do. How, is
+explained further on.</P>
+
+<P>The first thing that you must do is determine whether you need to use
+route filtering <B>at all</B>. If you are a "normal" node with two or
+three partners and you arranged in an "official" non-looping tree type
+network, then <B>you do not need to do route filtering</B> and you will
+feel a lot better for not getting involved. If you are successfully using
+<I>isolation</I> then you also probably don't need to use route filtering.</P>
+
+<P>To put it simply, you should not mix Isolation and Route Filtering. It
+will work, of sorts, but you will not get the expected results. If you
+are using Isolation sucessfully at the moment, do not get involved in
+Route Filtering unless you have a good supply of aspirin! Once you have
+started down the road of Route Filtering, do not use Isolation either.
+Use one or the other, not both.</P>
+
+<P>You will only require this functionality if you are "well-connected". What
+that means is that you are connected to several different parts of (say)
+the EU cluster and, at the same time, also connected to two or three places
+in the US which, in turn are connected back to the EU. This is called a
+"loop" and if you are seriously looped then you need filtering.</P>
+