-<P>Below is a complete list of commands available from the cluster prompt.
-Most maintenance tasks are automatic but there are some commands that are useful
-for a sysop. These are listed below in alphabetical order. The number in
-brackets following the command name is the permissions level needed to use
-the command.
-<P>
-<H2><A NAME="ss7.1">7.1 accept/announce (0)</A>
-</H2>
-
-<P><CODE><B>accept/announce [0-9] <pattern></B> Set an accept filter
-line for announce</CODE>
-<P>
-<P>Create an 'accept this announce' line for a filter.
-<P>An accept filter line means that if the announce matches this filter it is
-passed onto the user. See HELP FILTERS for more info. Please read this
-to understand how filters work - it will save a lot of grief later on.
-<P>You can use any of the following things in this line:-
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- info <string> eg: iota or qsl
- by <prefixes> eg: G,M,2
- origin <prefixes>
- origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
- origin_itu <numbers>
- origin_zone <numbers>
- by_dxcc <numbers>
- by_itu <numbers>
- by_zone <numbers>
- channel <prefixes>
- wx 1 filter WX announces
- dest <prefixes> eg: 6MUK,WDX (distros)
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>some examples:-
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- acc/ann dest 6MUK
- acc/ann 2 by_zone 14,15,16
- (this could be all on one line: acc/ann dest 6MUK or by_zone 14,15,16)
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>or
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- acc/ann by G,M,2
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>This filter would only allow announces that were posted buy UK stations.
-You can use the tag 'all' to accept everything eg:
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- acc/ann all
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>but this probably for advanced users...
-<P>
-<H2><A NAME="ss7.2">7.2 accept/announce (extended for sysops) (8)</A>
-</H2>
-
-<P><CODE><B>accept/announce <call> [input] [0-9]<pattern></B> Announce filter sysop version</CODE>
-<P>
-<P>This version allows a sysop to set a filter for a callsign as well as the
-default for nodes and users eg:-
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- accept/ann by G,M,2
- accept/ann input node_default by G,M,2
- accept/ann user_default by G,M,2
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>
-<H2><A NAME="ss7.3">7.3 accept/route (8)</A>
-</H2>
-
-<P><CODE><B>accept/route <call> [0-9] <pattern></B> Set an 'accept' filter line for routing</CODE>
-<P>
-<P>Create an 'accept this routing PC Protocol' line for a filter.
-<P>
-<P>An accept filter line means that if a PC16/17/19/21/24/41/50 matches this filter
-it is passed thru that interface. See HELP FILTERING for more info. Please read this
-to understand how filters work - it will save a lot of grief later on.
-<P>
-<P>You can use any of the following things in this line:-
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- call <prefixes> the callsign of the thingy
- call_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
- call_itu <numbers>
- call_zone <numbers>
- origin <prefixes> really the interface it came in on
- origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
- origin_itu <numbers>
- origin_zone <numbers>
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>
-<P>some examples:-
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- acc/route gb7djk call_dxcc 61,38 (send only UK+EIRE nodes)
- acc/route gb7djk call gb7djk (equiv to SET/ISOLATE)
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>
-<P>You can use the tag 'all' to accept everything eg:
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- acc/route all
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>
-<H2><A NAME="ss7.4">7.4 accept/spots (0)</A>
-</H2>
-
-<P><CODE><B>accept/announce [0-9] <pattern></B> Set an accept filter line for spots</CODE>
-<P>
-<P>Create an 'accept this spot' line for a filter.
-<P>
-<P>An accept filter line means that if the spot matches this filter it is
-passed onto the user. See HELP FILTERS for more info. Please read this
-to understand how filters work - it will save a lot of grief later on.
-<P>You can use any of the following things in this line:-
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- freq <range> eg: 0/30000 or hf or hf/cw or 6m,4m,2m
- on <range> same as 'freq'
- call <prefixes> eg: G,PA,HB9
- info <string> eg: iota or qsl
- by <prefixes>
- call_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
- call_itu <numbers>
- call_zone <numbers>
- by_dxcc <numbers>
- by_itu <numbers>
- by_zone <numbers>
- origin <prefixes>
- channel <prefixes>
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>
-<P>For frequencies, you can use any of the band names defined in
-SHOW/BANDS and you can use a subband name like: cw, rtty, data, ssb -
-thus: hf/ssb. You can also just have a simple range like: 0/30000 -
-this is more efficient than saying simply: freq HF (but don't get
-too hung up about that)
-<P>some examples:-
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- acc/spot 1 on hf/cw
- acc/spot 2 on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>You can use the tag 'all' to accept everything, eg:
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- acc/spot 3 all
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>but this probably for advanced users...
-<P>
-<H2><A NAME="ss7.5">7.5 accept/spots (extended for sysops) (8)</A>
-</H2>
-
-<P><CODE><B>accept/spots <call> [input] [0-9] <pattern></B> Spot filter sysop version</CODE>
-<P>
-<P>This version allows a sysop to set a filter for a callsign as well as the
-default for nodes and users eg:-
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- accept/spot db0sue-7 1 by_zone 14,15,16
- accept/spot node_default all
- set/hops node_default 10
-
- accept/spot user_default by G,M,2
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>
-<H2><A NAME="ss7.6">7.6 accept/wcy (0)</A>
-</H2>
-
-<P><CODE><B>accept/wcy [0-9] <pattern></B> set an accept WCY filter</CODE>
-<P>
-<P>It is unlikely that you will want to do this, but if you do then you can
-filter on the following fields:-
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- by <prefixes> eg: G,M,2
- origin <prefixes>
- origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
- origin_itu <numbers>
- origin_zone <numbers>
- by_dxcc <numbers>
- by_itu <numbers>
- by_zone <numbers>
- channel <prefixes>
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>
-<P>There are no examples because WCY Broadcasts only come from one place and
-you either want them or not (see UNSET/WCY if you don't want them).
-<P>This command is really provided for future use.
-<P>See HELP FILTER for information.
-<P>
-<H2><A NAME="ss7.7">7.7 accept/wcy (extended for sysops) (8)</A>
-</H2>
-
-<P><CODE><B>accept/wcy <call> [input] [0-9] <pattern></B>
-WCY filter sysop version</CODE>
-<P>
-<P>This version allows a sysop to set a filter for a callsign as well as the
-default for nodes and users eg:-
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- accept/wcy node_default all
- set/hops node_default 10
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>
-<H2><A NAME="ss7.8">7.8 accept/wwv (0)</A>
-</H2>
-
-<P><CODE><B>accept/wwv [0-9] <pattern></B> Set an accept WWV filter</CODE>
-<P>
-<P>It is unlikely that you will want to do this, but if you do then you can
-filter on the following fields:-
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- by <prefixes> eg: G,M,2
- origin <prefixes>
- origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
- origin_itu <numbers>
- origin_zone <numbers>
- by_dxcc <numbers>
- by_itu <numbers>
- by_zone <numbers>
- channel <prefixes>
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>for example
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- accept/wwv by_zone 4
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>is probably the only useful thing to do (which will only show WWV broadcasts
-by stations in the US).
-<P>See HELP FILTER for information.
-<P>
-<H2><A NAME="ss7.9">7.9 accept/wwv (extended for sysops) (8)</A>
-</H2>
-
-<P><CODE><B>accept/wwv <call> [input] [0-9] <pattern></B>
-WWV filter sysop version</CODE>
-<P>
-<P>This version allows a sysop to set a filter for a callsign as well as the
-default for nodes and users eg:-
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- accept/wwv db0sue-7 1 by_zone 4
- accept/wwv node_default all
- set/hops node_default 10
-
- accept/wwv user_default by W,K
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>
-<H2><A NAME="ss7.10">7.10 announce (0)</A>
-</H2>
-
-<P><CODE><B>announce <text></B> Send an announcement to local users</CODE>
-<P>
-<P>Send an announcement to LOCAL users only, where <text> is the text
-of the announcement you wish to broadcast. If you do not wish to receive
-announces, use the <EM>set/noannounce</EM> command. Any announces made by
-a sysop will override set/noannounce.
-<P>
-<H2><A NAME="ss7.11">7.11 announce full (0)</A>
-</H2>
-
-<P><CODE><B>announce full <text></B> Send an announcement cluster wide</CODE>
-<P>
-<P>This command will send your announcement across the whole cluster
-network.
-<P>
-<P>
-<H2><A NAME="ss7.12">7.12 announce sysop (5)</A>
-</H2>
-
-<P><CODE><B>announce sysop <text></B></CODE>
-<P>
-<P>Send an announcement to Sysops only
-<P>
-<H2><A NAME="ss7.13">7.13 apropos (0)</A>
-</H2>
-
-<P><CODE><B>apropos <string></B> Search the help database</CODE>
-<P>
-<P>Search the help database for <string> (it isn't case sensitive),
-and print the names of all the commands that may be relevant.
-<P>
-<H2><A NAME="ss7.14">7.14 bye (0)</A>
-</H2>
-
-<P><CODE><B>bye</B> Exit from the cluster</CODE>
-<P>
-<P>This will disconnect you from the cluster
-<P>
-<H2><A NAME="ss7.15">7.15 catchup (5)</A>
-</H2>
-
-<P><CODE><B>catchup <node_call> All|[<msgno> ...]</B> Mark a message as sent</CODE>
-<P>
-<P>When you send messages the fact that you have forwarded it to another node
-is remembered so that it isn't sent again. When you have a new partner
-node and you add their callsign to your /spider/msg/forward.pl file, all
-outstanding non-private messages will be forwarded to them. This may well
-be ALL the non-private messages. You can prevent this by using these
-commmands:-
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- catchup GB7DJK all
- catchup GB7DJK 300 301 302 303 500-510
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>and to undo what you have just done:-
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- uncatchup GB7DJK all
- uncatchup GB7DJK 300 301 302 303 500-510
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>which will arrange for them to be forward candidates again.
-<P>Order is not important.
-<P>
-<H2><A NAME="ss7.16">7.16 clear/spots (0)</A>
-</H2>
-
-<P><CODE><B>clear/spots [1|all]</B> Clear a spot filter line</CODE>
-<P>
-<P>This command allows you to clear (remove) a line in a spot filter or to
-remove the whole filter.
-<P>If you have a filter:-
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- acc/spot 1 on hf/cw
- acc/spot 2 on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>and you say:-
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- clear/spot 1
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>you will be left with:-
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- acc/spot 2 on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>If you do:
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- clear/spot all
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>the filter will be completely removed.
-<P>
-<P>
-<H2><A NAME="ss7.17">7.17 connect (5) </A>
-</H2>
-
-<P><CODE><B>connect <callsign></B> Start a connection to another DX Cluster</CODE>
-<P>
-<P>Start a connection process that will culminate in a new connection to the
-DX cluster <callsign>. This process creates a new 'client' process which will
-use the script in /spider/connect/<callsign> to effect the 'chat' exchange
-necessary to traverse the network(s) to logon to the cluster <callsign>.
-<P>
-<H2><A NAME="ss7.18">7.18 dbavail (0)</A>
-</H2>
-
-<P><CODE><B>dbavail</B> Show a list of all the databases in the system</CODE>
-<P>
-<P>The title says it all really, this command lists all the databases defined
-in the system. It is also aliased to SHOW/COMMAND.
-<P>
-<H2><A NAME="ss7.19">7.19 dbcreate (9)</A>
-</H2>
-
-<P><CODE><B>dbcreate <name></B> Create a database entry<BR>
-<B>dbcreate <name> chain <name> [<name>..]</B> Create a chained database entry<BR>
-<B>dbcreate <name> remote <node></B> Create a remote database
-entry<BR></CODE>
-<P>
-<P>DBCREATE allows you to define a database in the system. It doesn't actually
-create anything, just defines it.
-<P>The databases that are created are simple DB_File hash databases, they are
-therefore already 'indexed'.
-<P>You can define a local database with the first form of the command eg:
-<P>DBCREATE oblast
-<P>You can also chain databases with the addition of the 'chain' keyword.
-This will search each database one after the other. A typical example
-is:
-<P>DBCREATE sdx_qsl chain sql_ad
-<P>No checking is done to see if the any of the chained databases exist, in
-fact it is usually better to do the above statement first then do each of
-the chained databases.
-<P>Databases can exist offsite. To define a database that lives on another
-node do:
-<P>DBCREATE buckmaster remote gb7dxc
-<P>Remote databases cannot be chained; however, the last database in a
-a chain can be a remote database eg:
-<P>DBCREATE qsl chain gb7dxc
-<P>To see what databases have been defined do:
-<P>DBAVAIL (or it will have been aliased to SHOW/COMMAND)
-<P>It would be normal for you to add an entry into your local Aliases file
-to allow people to use the 'SHOW/<dbname>' style syntax. So you would
-need to add a line like:-
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- 's' => [
- ..
- ..
- '^sh\w*/buc', 'dbshow buckmaster', 'dbshow',
- ..
- ..
- ],
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>to allow
-<P>SH/BUCK g1tlh
-<P>to work as they may be used to.
-<P>See DBIMPORT for the importing of existing AK1A format data to databases.
-See DBSHOW for generic database enquiry
-<P>
-<H2><A NAME="ss7.20">7.20 dbimport (9)</A>
-</H2>
-
-<P><CODE><B>dbimport <dbname></B> Import AK1A data into a database</CODE>
-<P>
-<P>If you want to import or update data in bulk to a database you can use
-this command. It will either create or update entries into an existing
-database. For example:-
-<P>DBIMPORT oblast /tmp/OBLAST.FUL
-<P>will import the standard OBLAST database that comes with AK1A into the
-oblast database held locally.
-<P>
-<H2><A NAME="ss7.21">7.21 dbremove (9)</A>
-</H2>
-
-<P><CODE><B>dbremove <dbname></B> Delete a database</CODE>
-<P>
-<P>DBREMOVE will completely remove a database entry and also delete any data
-file that is associated with it.
-<P>There is no warning, no comeback, no safety net.
-<P>For example:
-<P>DBREMOVE oblast
-<P>will remove the oblast database from the system and it will also remove
-the associated datafile.
-<P>I repeat:
-<P>There is no warning, no comeback, no safety net.
-<P>You have been warned.
-<P>
-<H2><A NAME="ss7.22">7.22 dbshow (0)</A>
-</H2>
-
-<P><CODE><B>dbshow <dbname> <key></B> Display an entry, if it exists, in a database</CODE>
-<P>
-<P>This is the generic user interface to the database to the database system.
-It is expected that the sysop will add an entry to the local Aliases file
-so that users can use the more familiar AK1A style of enquiry such as:
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- SH/BUCK G1TLH
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>but if he hasn't and the database really does exist (use DBAVAIL or
-SHOW/COMMAND to find out) you can do the same thing with:
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- DBSHOW buck G1TLH
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>
-<P>
-<H2><A NAME="ss7.23">7.23 debug (9)</A>
-</H2>
-
-<P><CODE><B>debug</B> Set the cluster program into debug mode</CODE>
-<P>
-<P>Executing this command will only have an effect if you are running the cluster
-in debug mode i.e.
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- perl -d cluster.pl
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>It will interrupt the cluster just after the debug command has finished.
-<P>
-<H2><A NAME="ss7.24">7.24 directory (0)</A>
-</H2>
-
-<P><CODE><B>directory</B> List messages<BR> <B>directory all</B> List all messages<BR>
-<B>directory own</B> List your own messages<BR>
-<B>directory new</B> List all new messages<BR>
-<B>directory to <call></B> List all messages to <call><BR>
-<B>directory from <call></B> List all messages from <call><BR>
-<B>directory subject <string></B> List all messages with <string> in subject<BR>
-<B>directory <nn></B> List last <nn> messages<BR>
-<B>directory <from>-<to></B> List messages <from> message <to> message <BR></CODE>
-<P>
-<P>List the messages in the messages directory.
-<P>If there is a 'p' one space after the message number then it is a
-personal message. If there is a '-' between the message number and the
-'p' then this indicates that the message has been read.
-<P>You can use shell escape characters such as '*' and '?' in the <call>
-fields.
-<P>You can combine some of the various directory commands together eg:-
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- DIR TO G1TLH 5
-or
- DIR SUBJECT IOTA 200-250
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>You can abbreviate all the commands to one letter and use ak1a syntax:-
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- DIR/T G1* 10
- DIR/S QSL 10-100 5
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>
-<P>
-<H2><A NAME="ss7.25">7.25 directory (extended for sysops) (5)</A>
-</H2>
-
-<P>Works just like the user command except that sysops can see ALL messages.
-<P>
-<H2><A NAME="ss7.26">7.26 disconnect (8)</A>
-</H2>
-
-<P><CODE><B>disconnect <call> [<call> ...]</B> Disconnect a user or node</CODE>
-<P>
-<P>Disconnect any <call> connected locally
-<P>
-<H2><A NAME="ss7.27">7.27 dx (0)</A>
-</H2>
-
-<P><CODE><B>dx [by <call>] <freq> <call> <remarks></B> Send a DX spot</CODE>
-<P>
-<P>This is how you send a DX Spot to other users. You can, in fact, now
-enter the <freq> and the <call> either way round.
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- DX FR0G 144.600
- DX 144.600 FR0G
- DX 144600 FR0G
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>will all give the same result. You can add some remarks to the end
-of the command and they will be added to the spot.
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- DX FR0G 144600 this is a test
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>You can credit someone else by saying:-
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- DX by G1TLH FR0G 144.600 he isn't on the cluster
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>The <freq> is compared against the available bands set up in the
-cluster. See SHOW/BANDS for more information.
-<P>
-<H2><A NAME="ss7.28">7.28 export (9)</A>
-</H2>
-
-<P><CODE><B>export <msgno> <filename></B> Export a message to a file</CODE>
-<P>
-<P>Export a message to a file. This command can only be executed on a local
-console with a fully privileged user. The file produced will be in a form
-ready to be imported back into the cluster by placing it in the import
-directory (/spider/msg/import).
-<P>This command cannot overwrite an existing file. This is to provide some
-measure of security. Any files written will owned by the same user as the
-main cluster, otherwise you can put the new files anywhere the cluster can
-access. For example:-
-<P>EXPORT 2345 /tmp/a
-<P>
-<H2><A NAME="ss7.29">7.29 export_users (9)</A>
-</H2>
-
-<P><CODE><B>export_users [<filename>]</B> Export the users database to ascii</CODE>
-<P>
-<P>Export the users database to a file in ascii format. If no filename
-is given then it will export the file to /spider/data/user_asc.
-<P>If the file already exists it will be renamed to <filename>.o. In fact
-up to 5 generations of the file can be kept each one with an extra 'o' on the
-suffix.
-<P>BE WARNED: this will write to any file you have write access to. No check is
-made on the filename (if any) that you specify.
-<P>
-<H2><A NAME="ss7.30">7.30 forward/latlong (8)</A>
-</H2>
-
-<P><CODE><B>forward/latlong <node_call></B> Send latitude and longitude information to another cluster</CODE>
-<P>
-<P>This command sends all the latitude and longitude information that your
-cluster is holding against callsigns. One advantage of recieving this
-information is that more locator information is held by you. This
-means that more locators are given on the DX line assuming you have
-<EM>set/dxgrid</EM> enabled. This could be a LOT of information though, so
-it is not recommended on slow links.
-<P>
-<H2><A NAME="ss7.31">7.31 forward/opername (1)</A>
-</H2>
-
-<P><CODE><B>forward/opername <call></B> Send out information on this <call> to all clusters</CODE>
-<P>
-<P>This command sends out any information held in the user file which can
-be broadcast in PC41 protocol packets. This information is Name, QTH, Location
-and Homenode. PC41s are only sent for the information that is available.
-<P>
-<H2><A NAME="ss7.32">7.32 help (0)</A>
-</H2>
-
-<P><CODE><B>help <cmd></B> Get help on a command</CODE>
-<P>
-<P>All commands can be abbreviated, so SHOW/DX can be abbreviated
-to SH/DX, ANNOUNCE can be shortened to AN and so on.
-<P>Look at the APROPOS <string> command which will search the help database
-for the <string> you specify and give you a list of likely commands
-to look at with HELP.
-<P>
-<H2><A NAME="ss7.33">7.33 init (5)</A>
-</H2>
-
-<P><CODE><B>init <node call></B> Re-initialise a link to an AK1A compatible node</CODE>
-<P>
-<P>This command attempts to re-initialise a link to a (usually) AK1A node
-that has got confused, usually by a protocol loop of some kind. It may
-work - but you usually will be better off simply disconnecting it (or
-better, if it is a real AK1A node, doing an RCMD <node> DISC/F <your
-node>).
-<P>Best of luck - you will need it.
-<P>
-<H2><A NAME="ss7.34">7.34 kill (0)</A>
-</H2>
-
-<P><CODE><B>kill <msgno> [<msgno> ..]</B> Delete a message from the local system</CODE>
-<P>
-<P>Delete a message from the local system. You will only be able to
-delete messages that you have originated or been sent (unless you are
-the sysop).
-<P>
-<H2><A NAME="ss7.35">7.35 kill (5)</A>
-</H2>
-
-<P><CODE><B>kill <msgno> [<msgno> ...]</B> Remove or erase a message from the system<BR>
-<B>kill from <call></B> Remove all messages from a callsign<BR>
-<B>kill to <call></B> Remove all messages to a callsign<BR></CODE>
-<P>
-<P>You can get rid of any message to or originating from your callsign using
-this command. You can remove more than one message at a time.
-<P>As a sysop you can kill any message on the system.
-<P>
-<H2><A NAME="ss7.36">7.36 kill full (5)</A>
-</H2>
-
-<P><CODE><B>kill full <msgno> [<msgno>]</B> Delete a message from the whole cluster</CODE>
-<P>
-<P>Delete a message (usually a 'bulletin') from the whole cluster system.
-<P>This uses the subject field, so any messages that have exactly the same subject
-will be deleted. Beware!
-<P>
-<H2><A NAME="ss7.37">7.37 links (0)</A>
-</H2>
-
-<P><CODE><B>links</B> Show which nodes are physically connected</CODE>
-<P>
-<P>This is a quick listing that shows which links are connected and
-some information about them. See WHO for a list of all connections.
-<P>
-<P>
-<H2><A NAME="ss7.38">7.38 load/aliases (9)</A>
-</H2>
-
-<P><CODE><B>load/aliases</B> Reload the command alias table</CODE>
-<P>
-<P>Reload the /spider/cmd/Aliases file after you have editted it. You will need to
-do this if you change this file whilst the cluster is running in order for the
-changes to take effect.
-<P>
-<P>
-<H2><A NAME="ss7.39">7.39 load/baddx (9)</A>
-</H2>
-
-<P><CODE><B>load/baddx</B> Reload the bad DX table</CODE>
-<P>
-<P>Reload the /spider/data/baddx.pl file if you have changed it manually whilst
-the cluster is running. This table contains the DX Calls that, if spotted,
-will not be passed on. FR0G and TEST are classic examples.
-<P>
-<H2><A NAME="ss7.40">7.40 load/badmsg (9)</A>
-</H2>
-
-<P><CODE><B>load/badmsg</B> Reload the bad message table</CODE>
-<P>
-<P>Reload the /spider/msg/badmsg.pl file if you have changed it manually whilst
-the cluster is running. This table contains a number of perl regular
-expressions which are searched for in the fields targetted of each message.
-If any of them match then that message is immediately deleted on receipt.
-<P>
-<H2><A NAME="ss7.41">7.41 load/badwords (9)</A>
-</H2>
-
-<P><CODE><B>load/badwords</B> Reload the badwords file</CODE>
-<P>
-<P>Reload the /spider/data/badwords file if you have changed it manually whilst
-the cluster is running. This file contains a list of words which, if found
-on certain text portions of PC protocol, will cause those protocol frames
-to be rejected. It will all put out a message if any of these words are
-used on the announce, dx and talk commands. The words can be one or
-more on a line, lines starting with '#' are ignored.
-<P>
-<H2><A NAME="ss7.42">7.42 load/bands (9)</A>
-</H2>
-
-<P><CODE><B>load/bands</B> Reload the band limits table</CODE>
-<P>
-<P>Reload the /spider/data/bands.pl file if you have changed it manually whilst
-the cluster is running.
-<P>
-<H2><A NAME="ss7.43">7.43 load/cmd_cache (9)</A>
-</H2>
-
-<P><CODE><B>load/cmd_cache</B> Reload the automatic command cache</CODE>
-<P>
-<P>Normally, if you change a command file in the cmd or local_cmd tree it will
-automatially be picked up by the cluster program. Sometimes it can get confused
-if you are doing a lot of moving commands about or delete a command in the
-local_cmd tree and want to use the normal one again. Execute this command to
-reset everything back to the state it was just after a cluster restart.
-<P>
-<H2><A NAME="ss7.44">7.44 load/forward (9)</A>
-</H2>
-
-<P><CODE><B>load/forward</B> Reload the msg forwarding routing table</CODE>
-<P>Reload the /spider/msg/forward.pl file if you have changed it
-manually whilst the cluster is running.
-<P>
-<H2><A NAME="ss7.45">7.45 load/messages (9)</A>
-</H2>
-
-<P><CODE><B>load/messages</B> Reload the system messages file</CODE>
-<P>
-<P>If you change the /spider/perl/Messages file (usually whilst fiddling/writing ne
-commands) you can have them take effect during a cluster session by executing this
-command. You need to do this if get something like :-
-<P>unknown message 'xxxx' in lang 'en'
-<P>
-<H2><A NAME="ss7.46">7.46 load/prefixes (9)</A>
-</H2>
-
-<P><CODE><B>load/prefixes</B> Reload the prefix table</CODE>
-<P>
-<P>Reload the /spider/data/prefix_data.pl file if you have changed it manually
-whilst the cluster is running.
-<P>
-<H2><A NAME="ss7.47">7.47 merge (5)</A>
-</H2>
-
-<P><CODE><B>merge <node> [<no spots>/<no wwv>]</B> Ask for the latest spots and WWV</CODE>
-<P>
-<P>MERGE allows you to bring your spot and wwv database up to date. By default
-it will request the last 10 spots and 5 WWVs from the node you select. The
-node must be connected locally.
-<P>You can request any number of spots or wwv and although they will be appended
-to your databases they will not duplicate any that have recently been added
-(the last 2 days for spots and last month for WWV data).
-<P>
-<H2><A NAME="ss7.48">7.48 msg (9)</A>
-</H2>
-
-<P><CODE><B>msg <cmd> <msgno> [data ...]</B> Alter various message parameters</CODE>
-<P>
-<P>Alter message parameters like To, From, Subject, whether private or bulletin
-or return receipt (RR) is required or whether to keep this message from timing
-out.
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- MSG TO <msgno> <call> - change TO callsign to <call>
- MSG FRom <msgno> <call> - change FROM callsign to <call>
- MSG PRrivate <msgno> - set private flag
- MSG NOPRrivate <msgno> - unset private flag
- MSG RR <msgno> - set RR flag
- MSG NORR <msgno> - unset RR flag
- MSG KEep <msgno> - set the keep flag (message won't be deleted ever)
- MSG NOKEep <msgno> - unset the keep flag
- MSG SUbject <msgno> <new> - change the subject to <new>
- MSG WAittime <msgno> - remove any waitting time for this message
- MSG NOREad <msgno> - mark message as unread
- MSG REad <msgno> - mark message as read
- MSG QUeue - queue any outstanding bulletins
- MSG QUeue 1 - queue any outstanding private messages
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>You can look at the status of a message by using:-
-<P>STAT/MSG <msgno>
-<P>This will display more information on the message than DIR does.
-<P>
-<H2><A NAME="ss7.49">7.49 pc (8)</A>
-</H2>
-
-<P><CODE><B>pc <call> <text></B> Send text (eg PC Protocol) to <call></CODE>
-<P>
-<P>Send some arbitrary text to a locally connected callsign. No processing is done on
-the text. This command allows you to send PC Protocol to unstick things if problems
-arise (messages get stuck etc). eg:-
-<P>pc gb7djk PC33^GB7TLH^GB7DJK^400^
-<P>You can also use in the same way as a talk command to a connected user but
-without any processing, added of "from <blah> to <blah>" or whatever.
-<P>pc G1TLH Try doing that properly!!!
-<P>
-<H2><A NAME="ss7.50">7.50 ping (1)</A>
-</H2>
-
-<P><CODE><B>ping <node></B> Check the link quality between nodes</CODE>
-<P>
-<P>his command allows you to send a frame to another cluster node on
-the network and get a return frame. The time it takes to do this
-is a good indication of the quality of the link. The actual time
-it takes is output to the console in seconds.
-Any visible cluster node can be PINGed.
-<P>
-<P>
-<H2><A NAME="ss7.51">7.51 rcmd (1)</A>
-</H2>
-
-<P><CODE><B>rcmd <node call> <cmd></B> Send a command to another DX cluster</CODE>
-<P>
-<P>This command allows you to send nearly any command to another DX Cluster
-node that is connected to the system.
-<P>Whether you get any output is dependant on a) whether the other system knows
-that the node callsign of this cluster is in fact a node b) whether the
-other system is allowing RCMDs from this node and c) whether you have
-permission to send this command at all.
-<P>
-<H2><A NAME="ss7.52">7.52 read (0)</A>
-</H2>
-
-<P><CODE><B>read</B> Read the next unread personal message addressed to you<BR>
-<B>read <msgno></B> Read the specified message<BR></CODE>
-<P>
-<P>You can read any messages that are sent as 'non-personal' and also any
-message either sent by or sent to your callsign.
-<P>
-<P>
-<H2><A NAME="ss7.53">7.53 read (extended for sysops) (5) </A>
-</H2>
-
-<P><CODE><B>read <msgno></B> Read a message on the system</CODE>
-<P>
-<P>As a sysop you may read any message on the system
-<P>
-<H2><A NAME="ss7.54">7.54 reject/announce</A>
-</H2>
-
-<P><CODE><B>reject/announce [0-9] <pattern></B> Set a reject filter
-for announce</CODE>
-<P>
-<P>Create an 'reject this announce' line for a filter.
-<P>An reject filter line means that if the announce matches this filter it is
-passed onto the user. See HELP FILTERS for more info. Please read this
-to understand how filters work - it will save a lot of grief later on.
-<P>You can use any of the following things in this line:-
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- info <string> eg: iota or qsl
- by <prefixes> eg: G,M,2
- origin <prefixes>
- origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
- origin_itu <numbers>
- origin_zone <numbers>
- by_dxcc <numbers>
- by_itu <numbers>
- by_zone <numbers>
- channel <prefixes>
- wx 1 filter WX announces
- dest <prefixes> eg: 6MUK,WDX (distros)
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>some examples:-
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- rej/ann by_zone 14,15,16 and not by G,M,2
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>You can use the tag 'all' to reject everything eg:
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- rej/ann all
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>but this probably for advanced users...
-<P>
-<H2><A NAME="ss7.55">7.55 reject/announce (extended for sysops) (8)</A>
-</H2>
-
-<P><CODE><B>reject/announce <call> [input] [0-9] <pattern></B> Announce filter sysop version</CODE>
-<P>
-<P>This version allows a sysop to set a filter for a callsign as well as the
-default for nodes and users eg:-
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- reject/ann by G,M,2
- reject/ann input node_default by G,M,2
- reject/ann user_default by G,M,2
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>
-<H2><A NAME="ss7.56">7.56 reject/route (8)</A>
-</H2>
-
-<P><CODE><B>reject/route <call> [0-9] <pattern></B> Set an 'reject' filter line for routing</CODE>
-<P>
-<P>Create an 'reject this routing PC Protocol' line for a filter.
-<P>
-<P>An reject filter line means that if a PC16/17/19/21/24/41/50 matches this filter
-it is NOT passed thru that interface. See HELP FILTERING for more info. Please
-read this to understand how filters work - it will save a lot of grief later on.
-You can use any of the following things in this line:-
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- call <prefixes> the callsign of the thingy
- call_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
- call_itu <numbers>
- call_zone <numbers>
- origin <prefixes> really the interface it came in on
- origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
- origin_itu <numbers>
- origin_zone <numbers>
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>
-<P>some examples:-
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- rej/route gb7djk call_dxcc 61,38 (everything except UK+EIRE nodes)
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>
-<P>You can use the tag 'all' to reject everything eg:
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- rej/route all (equiv to [very] restricted mode)
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>
-<H2><A NAME="ss7.57">7.57 reject/spots (0)</A>
-</H2>
-
-<P><CODE><B>reject/spots [0-9] <pattern></B> Set a reject filter line for spots</CODE>
-<P>
-<P>Create a 'reject this spot' line for a filter.
-<P>A reject filter line means that if the spot matches this filter it is
-dumped (not passed on). See HELP FILTERS for more info. Please read this
-to understand how filters work - it will save a lot of grief later on.
-<P>You can use any of the following things in this line:-
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- freq <range> eg: 0/30000 or hf or hf/cw or 6m,4m,2m
- on <range> same as 'freq'
- call <prefixes> eg: G,PA,HB9
- info <string> eg: iota or qsl
- by <prefixes>
- call_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
- call_itu <numbers>
- call_zone <numbers>
- by_dxcc <numbers>
- by_itu <numbers>
- by_zone <numbers>
- origin <prefixes>
- channel <prefixes>
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>For frequencies, you can use any of the band names defined in
-SHOW/BANDS and you can use a subband name like: cw, rtty, data, ssb -
-thus: hf/ssb. You can also just have a simple range like: 0/30000 -
-this is more efficient than saying simply: on HF (but don't get
-too hung up about that)
-<P>some examples:-
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- rej/spot 1 on hf
- rej/spot 2 on vhf and not (by_zone 14,15,16 or call_zone 14,15,16)
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>You can use the tag 'all' to reject everything eg:
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- rej/spot 3 all
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>but this probably for advanced users...
-<P>
-<H2><A NAME="ss7.58">7.58 reject/spots (extended for sysops) (8)</A>
-</H2>
-
-<P><CODE><B>reject/spots <call> [input] [0-9] <pattern></B>
-Reject spot filter sysop version </CODE>
-<P>
-<P>This version allows a sysop to set a filter for a callsign as well as the
-default for nodes and users eg:-
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- reject/spot db0sue-7 1 by_zone 14,15,16
- reject/spot node_default all
- set/hops node_default 10
-
- reject/spot user_default by G,M,2
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>
-<H2><A NAME="ss7.59">7.59 reject/wcy (0)</A>
-</H2>
-
-<P><CODE><B>reject/wcy [0-9] <pattern></B> Set a reject WCY filter</CODE>
-<P>
-<P>It is unlikely that you will want to do this, but if you do then you can
-filter on the following fields:-
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- by <prefixes> eg: G,M,2
- origin <prefixes>
- origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
- origin_itu <numbers>
- origin_zone <numbers>
- by_dxcc <numbers>
- by_itu <numbers>
- by_zone <numbers>
- channel <prefixes>
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>There are no examples because WCY Broadcasts only come from one place and
-you either want them or not (see UNSET/WCY if you don't want them).
-<P>This command is really provided for future use.
-<P>See HELP FILTER for information.
-<P>
-<H2><A NAME="ss7.60">7.60 reject/wcy (extended for sysops) (8)</A>
-</H2>
-
-<P><CODE><B>reject/wcy <call> [input] [0-9] <pattern></B>
-WCY reject filter sysop version</CODE>
-<P>
-<P>This version allows a sysop to set a filter for a callsign as well as the
-default for nodes and users eg:-
-<P>reject/wcy gb7djk all
-<P>
-<H2><A NAME="ss7.61">7.61 reject/wwv (0)</A>
-</H2>
-
-<P><CODE><B>reject/wwv [0-9] <pattern></B> Set a reject WWV filter</CODE>
-<P>
-<P>It is unlikely that you will want to do this, but if you do then you can
-filter on the following fields:-
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- by <prefixes> eg: G,M,2
- origin <prefixes>
- origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
- origin_itu <numbers>
- origin_zone <numbers>
- by_dxcc <numbers>
- by_itu <numbers>
- by_zone <numbers>
- channel <prefixes>
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>for example
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- reject/wwv by_zone 14,15,16
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>is probably the only useful thing to do (which will only show WWV broadcasts
-by stations in the US).
-<P>See HELP FILTER for information.
-<P>
-<H2><A NAME="ss7.62">7.62 reject/wwv (extended for sysops) (8)</A>
-</H2>
-
-<P><CODE><B>reject/wwv <call> [input] [0-9] <pattern></B>
-WWV reject filter sysop version</CODE>
-<P>
-<P>This version allows a sysop to set a filter for a callsign as well as the
-default for nodes and users eg:-
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- reject/wwv db0sue-7 1 by_zone 4
- reject/wwv node_default all
-
- reject/wwv user_default by W
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>
-<H2><A NAME="ss7.63">7.63 reply (0)</A>
-</H2>
-
-<P><CODE><B>reply</B> Reply (privately) to the last message that you have read<BR>
-<B>reply <msgno></B> Reply (privately) to the specified message<BR>
-<B>reply B <msgno></B> Reply as a Bulletin to the specified message<BR>
-<B>reply NOPrivate <msgno></B> Reply as a Bulletin to the specified
-message<BR>
-<B>reply RR <msgno></B> Reply to the specified message with read receipt<BR></CODE>
-<P>
-<P>You can reply to a message and the subject will automatically have
-"Re:" inserted in front of it, if it isn't already present.
-<P>You can also use all the extra qualifiers such as RR, PRIVATE,
-NOPRIVATE, B that you can use with the SEND command (see SEND
-for further details)
-<P>
-<H2><A NAME="ss7.64">7.64 send (0)</A>
-</H2>
-
-<P><CODE><B>send <call> [<call> ...]</B> Send a message to one or more callsigns<BR>
-<B>send RR <call></B> Send a message and ask for a read receipt<BR>
-<B>send COPY <msgno> <call></B> Send a copy of a message to someone<BR>
-<B>send PRIVATE <call></B> Send a personal message<BR>
-<B>send NOPRIVATE <call></B> Send a message to all stations<BR></CODE>
-<P>
-<P>All the SEND commands will create a message which will be sent either to
-an individual callsign or to one of the 'bulletin' addresses.
-<P>SEND <call> on its own acts as though you had typed SEND PRIVATE, that is
-it will mark the message as personal and send it to the cluster node that
-that callsign is connected to.
-<P>You can have more than one callsign in all of the SEND commands.
-<P>You can have multiple qualifiers so that you can have for example:-
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- SEND RR COPY 123 PRIVATE G1TLH G0RDI
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>which should send a copy of message 123 to G1TLH and G0RDI and you will
-receive a read receipt when they have read the message.
-<P>SB is an alias for SEND NOPRIVATE (or send a bulletin in BBS speak)
-SP is an alias for SEND PRIVATE
-<P>
-<H2><A NAME="ss7.65">7.65 set/address (0)</A>
-</H2>
-
-<P><CODE><B>set/address <your_address></B> Record your postal address</CODE>
-<P>
-<P>Literally, record your address details on the cluster.
-<P>
-<H2><A NAME="ss7.66">7.66 set/announce (0)</A>
-</H2>
-
-<P><CODE><B>set/announce</B> Allow announce messages</CODE>
-<P>
-<P>Allow announce messages to arrive at your terminal.
-<P>
-<H2><A NAME="ss7.67">7.67 set/arcluster (5)</A>
-</H2>
-
-<P><CODE><B>set/arcluster <node_call> [<node_call> ...]</B> Make
-the node_call an AR-Cluster type node</CODE>
-<P>
-<P>Set the node_call as an AR-Cluster type node
-<P>
-<H2><A NAME="ss7.68">7.68 set/baddx (8)</A>
-</H2>
-
-<P><CODE><B>set/baddx <call></B> Stop words we do not wish to see in the callsign field
-of a dx spot being propagated</CODE>
-<P>
-<P>Setting a word as 'baddx' will prevent spots with that word in the callsign
-field of a DX spot from going any further. They will not be displayed and they
-will not be sent onto other nodes.
-<P>The word must be wriiten in full, no wild cards are allowed eg:-
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- set/baddx FORSALE VIDEO FR0G
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>To allow a word again, use the following command ...
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- unset/baddx VIDEO
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>
-<H2><A NAME="ss7.69">7.69 set/badnode (6)</A>
-</H2>
-
-<P><CODE><B>set/badnode <node_call></B> Stop spots from this node_call
-being propagated</CODE>
-<P>
-<P>Setting a callsign as a 'badnode' will prevent spots from that node
-going any further. They will not be displayed and they will not be
-sent onto other nodes.
-<P>The call can be a full or partial call (or a prefix), eg:-
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- set/badnode K1TTT
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>will stop anything from K1TTT (including any SSID's)
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- unset/badnode K1TTT
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>will allow spots from him again.
-<P>Use with extreme care. This command may well be superceded by FILTERing.
-<P>
-<H2><A NAME="ss7.70">7.70 set/badspotter (8)</A>
-</H2>
-
-<P><CODE><B>set/badspotter <call></B> Stop spots from this callsign being propagated</CODE>
-<P>
-<P>Setting a callsign as a 'badspotter' will prevent spots from this callsign
-going any further. They will not be displayed and they will not be
-sent onto other nodes.
-<P>The call must be written in full, no wild cards are allowed eg:-
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- set/badspotter VE2STN
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>will stop anything from VE2STN. If you want SSIDs as well then you must
-enter them specifically.
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- unset/badspotter VE2STN
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>will allow spots from him again.
-<P>Use with extreme care. This command may well be superceded by FILTERing.
-<P>
-<H2><A NAME="ss7.71">7.71 set/beep (0)</A>
-</H2>
-
-<P><CODE><B>set/beep</B> Add beeps to terminal messages</CODE>
-<P>
-<P>Add a beep to DX and other terminal messages.
-<P>
-<H2><A NAME="ss7.72">7.72 set/bbs (5)</A>
-</H2>
-
-<P><CODE><B>set/bbs <call> [<call>..]</B>Make <call> a BBS</CODE>
-<P>
-<H2><A NAME="ss7.73">7.73 set/clx (5)</A>
-</H2>
-
-<P><CODE><B>set/clx <node_call> [<node_call> ...]</B> Make
-the node_call a CLX type node</CODE>
-<P>
-<P>Set the node_call as a CLX type node
-<P>
-<H2><A NAME="ss7.74">7.74 set/debug (9)</A>
-</H2>
-
-<P><CODE><B>set/debug <name></B> Add a debug level to the debug set</CODE>
-<P>
-<P>You can choose to log several different levels. The levels are
-<P>chan
-state
-msg
-cron
-connect
-<P>You can show what levels you are logging with the <EM>show/debug</EM>
-command.
-<P>You can remove a debug level with unset/debug <name>
-<P>
-<H2><A NAME="ss7.75">7.75 set/dx (0)</A>
-</H2>
-
-<P><CODE><B>set/dx</B>Allow DX messages to arrive at your terminal</CODE>
-<P>
-<P>You can stop DX messages with the <EM>unset/dx</EM> command
-<P>
-<H2><A NAME="ss7.76">7.76 set/dxgrid (0)</A>
-</H2>
-
-<P><CODE><B>set/dxgrid</B>Allow grid squares on the end of DX messages</CODE>
-<P>
-<P>Some logging programs do not like the additional information at
-the end of a DX spot. If this is the case, use the <EM>unset/dxgrid</EM>
-command to remove the grid squares.
-<P>
-<H2><A NAME="ss7.77">7.77 set/dxnet (5)</A>
-</H2>
-
-<P><CODE><B>set/dxnet <node_call> [<node_call> ...]</B> Make
-the node_call a DXNet type node</CODE>
-<P>
-<P>Set the node_call as a DXNet type node
-<P>
-<H2><A NAME="ss7.78">7.78 set/echo (0)</A>
-</H2>
-
-<P><CODE><B>set/echo</B> Make the cluster echo your input</CODE>
-<P>
-<P>If you are connected via a telnet session, different implimentations
-of telnet handle echo differently depending on whether you are
-connected via port 23 or some other port. You can use this command
-to change the setting appropriately.
-<P>You can remove the echo with the <EM>unset/echo</EM> command
-<P>The setting is stored in your user profile.
-<P>YOU DO NOT NEED TO USE THIS COMMAND IF YOU ARE CONNECTED VIA AX25.
-<P>
-<H2><A NAME="ss7.79">7.79 set/here (0)</A>
-</H2>
-
-<P><CODE><B>set/here</B> Set the here flag</CODE>
-<P>
-<P>Let others on the cluster know you are here by only displaying your
-callsign. If you are away from your terminal you can use the <EM>unset/here</EM>
-command to let people know you are away. This simply puts brackets
-around your callsign to indicate you are not available.
-<P>
-<H2><A NAME="ss7.80">7.80 set/homenode (0)</A>
-</H2>
-
-<P><CODE><B>set/homenode <node_call></B> Set your home cluster</CODE>
-<P>
-<P>Tell the cluster system where you normally connect to. Any Messages sent
-to you will normally find their way there should you not be connected.
-eg:-
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- SET/HOMENODE gb7djk
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>
-<H2><A NAME="ss7.81">7.81 set/hops (8)</A>
-</H2>
-
-<P><CODE><B>set/hops <node_call> ann|spots|wwv|wcy <n></B>
-Set hop count</CODE>
-<P>
-<P>Set the hop count for a particular type of broadcast for a node.
-<P>This command allows you to set up special hop counts for a node
-for currently: announce, spots, wwv and wcy broadcasts.
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
-eg:
- set/hops gb7djk ann 10
- set/hops gb7mbc spots 20
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>Set SHOW/HOPS for information on what is already set. This command
-creates a filter and works in conjunction with the filter system.
-<P>
-<H2><A NAME="ss7.82">7.82 set/isolate (9)</A>
-</H2>
-
-<P><CODE><B>set/isolate <node call></B> Isolate a node from the rest of the network</CODE>
-<P>
-<P>Connect a node to your system in such a way that you are a full protocol
-member of its network and can see all spots on it, but nothing either leaks
-out from it nor goes back into from the rest of the nodes connected to you.
-<P>You can potentially connect several nodes in this way.
-<P>You can see which nodes are isolated with the show/isolate (1) command.
-<P>You can remove the isolation with the command unset/isolate.
-<P>
-<H2><A NAME="ss7.83">7.83 set/language (0)</A>
-</H2>
-
-<P><CODE><B>set/language <language></B> Set the language you wish to use</CODE>
-<P>
-<P>You can select the language that you want the cluster to use. Currently
-the languages available are <EM>en</EM> (English) and <EM>nl</EM> (Dutch).
-<P>
-<H2><A NAME="ss7.84">7.84 set/location (0)</A>
-</H2>
-
-<P><CODE><B>set/location <lat and long></B> Set your latitude and longitude</CODE>
-<P>
-<P>You can set your latitude and longitude manually or alternatively use the
-<EM>set/qra</EM> command which will do the conversion for you.
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- set/location 54 04 N 2 02 E
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>
-<P>
-<H2><A NAME="ss7.85">7.85 set/sys_location (9)</A>
-</H2>
-
-<P><CODE><B>set/sys_location <lat & long></B> Set your cluster latitude and longitude</CODE>
-<P>
-<P>In order to get accurate headings and such like you must tell the system
-what your latitude and longitude is. If you have not yet done a SET/QRA
-then this command will set your QRA locator for you. For example:-
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- SET/LOCATION 52 22 N 0 57 E
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>
-<H2><A NAME="ss7.86">7.86 set/logininfo (0)</A>
-</H2>
-
-<P><CODE><B>set/logininfo</B> Show logins and logouts of nodes and users</CODE>
-<P>
-<P>Show users and nodes when they log in and out of the local cluster. You
-can stop these messages by using the <EM>unset/logininfo</EM> command.
-<P>
-<P>
-<H2><A NAME="ss7.87">7.87 set/lockout (9)</A>
-</H2>
-
-<P><CODE><B>set/lockout <call></B> Stop a callsign connecting to the cluster</CODE>
-<P>
-<P>You can show who is locked out with the <EM>show/lockout</EM> command.
-To allow the user to connect again, use the <EM>unset/lockout</EM> command.
-<P>
-<H2><A NAME="ss7.88">7.88 set/name (0)</A>
-</H2>
-
-<P><CODE><B>set/name <your_name></B> Set your name</CODE>
-<P>
-<P>Tell the cluster what your name is, eg:-
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- set/name Dirk
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>
-<H2><A NAME="ss7.89">7.89 set/node (9)</A>
-</H2>
-
-<P><CODE><B>set/node <call> [<call> ...]</B> Make the callsign an AK1A cluster</CODE>
-<P>
-<P>Tell the system that the call(s) are to be treated as AK1A cluster and
-fed PC Protocol rather normal user commands.
-<P>From version 1.41 you can also set the following types of cluster
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- set/spider
- set/dxnet
- set/clx
- set/arcluster
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>To see what your nodes are set to, use the <EM>show/nodes</EM> command.
-<P>
-<H2><A NAME="ss7.90">7.90 set/obscount (9)</A>
-</H2>
-
-<P><CODE><B>set/obscount <count> <node call></B> Set the 'pump-up' obsolescence counter</CODE>
-<P>
-<P>From version 1.35 onwards neighbouring nodes are pinged at regular intervals (see
-SET/PINGINTERVAL), usually 300 seconds or 5 minutes. There is a 'pump-up'
-counter which is decremented on every outgoing ping and then reset to
-the 'obscount' value on every incoming ping. The default value of this
-parameter is 2.
-<P>What this means is that a neighbouring node will be pinged twice at
-(default) 300 second intervals and if no reply has been heard just before
-what would be the third attempt, that node is disconnected.
-<P>If a ping is heard then the obscount is reset to the full value. Using
-default values, if a node has not responded to a ping within 15 minutes,
-it is disconnected.
-<P>
-<H2><A NAME="ss7.91">7.91 set/page (0)</A>
-</H2>
-
-<P><CODE><B>set/page <n></B> Set the number of lines per page</CODE>
-<P>
-<P>Tell the system how many lines you wish on a page when the number of lines
-of output from a command is more than this. The default is 20. Setting it
-explicitly to 0 will disable paging.
-<P>
-<BLOCKQUOTE><CODE>
-<PRE>
- SET/PAGE 30
- SET/PAGE 0
-</PRE>
-</CODE></BLOCKQUOTE>
-<P>The setting is stored in your user profile.
-<P>
-<P>
-<H2><A NAME="ss7.92">7.92 set/password (9)</A>
-</H2>
-
-<P><CODE><B>set/password <callsign> <string></B> Set a users password</CODE>
-<P>
-<P>The password for a user can only be set by a full sysop. The string
-can contain any characters but any spaces are removed (you can type in
-spaces - but they won't appear in the password). You can see the
-result with STAT/USER. The password is the usual 30 character baycom
-type password.
-<P>
-<H2><A NAME="ss7.93">7.93 set/pinginterval (9)</A>
-</H2>