-<P>Export a message to a file. This command can only be executed on a local
-console with a fully privileged user. The file produced will be in a form
-ready to be imported back into the cluster by placing it in the import
-directory (/spider/msg/import).
-<P>This command cannot overwrite an existing file. This is to provide some
-measure of security. Any files written will owned by the same user as the
-main cluster, otherwise you can put the new files anywhere the cluster can
-access. For example:-
-<P>EXPORT 2345 /tmp/a
-<P>
-<H2><A NAME="ss8.11">8.11 forward/opername (1)</A>
-</H2>
-
-<P><CODE><B>forward/opername <call></B> Send out information on this <call> to all clusters</CODE>
-<P>
-<P>This command sends out any information held in the user file which can
-be broadcast in PC41 protocol packets. This information is Name, QTH, Location
-and Homenode. PC41s are only sent for the information that is available.
-<P>
-<H2><A NAME="ss8.12">8.12 init (5)</A>
-</H2>
-
-<P><CODE><B>init <node call></B> Re-initialise a link to an AK1A compatible node</CODE>
-<P>
-<P>This command attempts to re-initialise a link to a (usually) AK1A node
-that has got confused, usually by a protocol loop of some kind. It may
-work - but you usually will be better off simply disconnecting it (or
-better, if it is a real AK1A node, doing an RCMD <node> DISC/F <your
-node>).
-<P>Best of luck - you will need it.
-<P>
-<H2><A NAME="ss8.13">8.13 kill (5)</A>
-</H2>
-
-<P><CODE><B>kill <msgno> [<msgno> ...]</B> Remove or erase a message from the system<BR>
-<B>kill from <call></B> Remove all messages from a callsign<BR>
-<B>kill to <call></B> Remove all messages to a callsign<BR></CODE>
-<P>
-<P>You can get rid of any message to or originating from your callsign using
-this command. You can remove more than one message at a time.
-<P>As a sysop you can kill any message on the system.
-<P>
-<H2><A NAME="ss8.14">8.14 kill full (5)</A>
-<CODE><B>kill full <msgno> [<msgno>]</B> Delete a message from the whole cluster</CODE></H2>
-
-<P>Delete a message (usually a 'bulletin') from the whole cluster system.
-<P>This uses the subject field, so any messages that have exactly the same subject
-will be deleted. Beware!
-<P>
-<H2><A NAME="ss8.15">8.15 load/aliases (9)</A>
-</H2>
-
-<P><CODE><B>load/aliases</B> Reload the command alias table</CODE>
-<P>
-<P>Reload the /spider/cmd/Aliases file after you have editted it. You will need to
-do this if you change this file whilst the cluster is running in order for the
-changes to take effect.
-<P>
-<H2><A NAME="ss8.16">8.16 load/bands (9)</A>
-</H2>
-
-<P><CODE><B>load/bands</B> Reload the band limits table</CODE>
-<P>
-<P>Reload the /spider/data/bands.pl file if you have changed it manually whilst
-the cluster is running.
-<P>
-<H2><A NAME="ss8.17">8.17 load/cmd_cache (9)</A>
-</H2>
-
-<P><CODE><B>load/cmd_cache</B> Reload the automatic command cache</CODE>
-<P>
-<P>Normally, if you change a command file in the cmd or local_cmd tree it will
-automatially be picked up by the cluster program. Sometimes it can get confused
-if you are doing a lot of moving commands about or delete a command in the
-local_cmd tree and want to use the normal one again. Execute this command to
-reset everything back to the state it was just after a cluster restart.
-<P>
-<H2><A NAME="ss8.18">8.18 load/forward (9)</A>
-</H2>
-
-<P><CODE><B>load/forward</B> Reload the msg forwarding routing table</CODE>
-<P>Reload the /spider/msg/forward.pl file if you have changed it
-manually whilst the cluster is running.
-<P>
-<H2><A NAME="ss8.19">8.19 load/messages (9)</A>
-</H2>
-
-<P><CODE><B>load/messages</B> Reload the system messages file</CODE>
-<P>
-<P>If you change the /spider/perl/Messages file (usually whilst fiddling/writing ne
-commands) you can have them take effect during a cluster session by executing this
-command. You need to do this if get something like :-
-<P>unknown message 'xxxx' in lang 'en'
-<P>
-<H2><A NAME="ss8.20">8.20 load/prefixes (9)</A>
-</H2>
-
-<P><CODE><B>load/prefixes</B> Reload the prefix table</CODE>
-<P>
-<P>Reload the /spider/data/prefix_data.pl file if you have changed it manually whilst
-the cluster is running.
-<P>
-<H2><A NAME="ss8.21">8.21 merge (5)</A>
-</H2>
-
-<P><CODE><B>merge <node> [<no spots>/<no wwv>]</B> Ask for the latest spots and WWV</CODE>
-<P>
-<P>MERGE allows you to bring your spot and wwv database up to date. By default
-it will request the last 10 spots and 5 WWVs from the node you select. The
-node must be connected locally.
-<P>You can request any number of spots or wwv and although they will be appended
-to your databases they will not duplicate any that have recently been added
-(the last 2 days for spots and last month for WWV data).
-<P>
-<H2><A NAME="ss8.22">8.22 msg (9)</A>
-</H2>
-
-<P><CODE><B>msg <cmd> <msgno> [data ...]</B> Alter various message parameters</CODE>
-<P>
-<P>Alter message parameters like To, From, Subject, whether private or bulletin
-or return receipt (RR) is required or whether to keep this message from timing
-out.