+
+<H2><A NAME="ss11.1">11.1</A> <A HREF="usermanual_en.html#toc11.1">accept</A>
+</H2>
+
+<P><CODE><B>accept</B> Set a filter to accept something</CODE></P>
+
+<P>Create a filter to accept something</P>
+<P>There are 2 types of filter, accept and reject. See HELP FILTERING for more
+info.</P>
+<H2><A NAME="ss11.2">11.2</A> <A HREF="usermanual_en.html#toc11.2">accept/announce [0-9] <pattern></A>
+</H2>
+
+<P><CODE><B>accept/announce [0-9] <pattern></B> Set an 'accept' filter line for announce</CODE></P>
+
+<P>Create an 'accept this announce' line for a filter. </P>
+<P>An accept filter line means that if the announce matches this filter it is
+passed onto the user. See HELP FILTERING for more info. Please read this
+to understand how filters work - it will save a lot of grief later on.</P>
+<P>You can use any of the following things in this line:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ info <string> eg: iota or qsl
+ by <prefixes> eg: G,M,2
+ origin <prefixes>
+ origin_dxcc <prefixes or numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <prefixes or numbers> or: G,GM,GW
+ origin_zone <prefixes or numbers>
+ origin_state <states> eg: VA,NH,RI,NH
+ by_dxcc <prefixes or numbers>
+ by_itu <prefixes or numbers>
+ by_zone <prefixes or numbers>
+ by_state <states>
+ channel <prefixes>
+ wx 1 filter WX announces
+ dest <prefixes> eg: 6MUK,WDX (distros)
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>some examples:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ acc/ann dest 6MUK
+ acc/ann 2 by_zone 14,15,16
+ (this could be all on one line: acc/ann dest 6MUK or by_zone 14,15,16)
+</PRE>
+</CODE></BLOCKQUOTE>
+
+or
+<BLOCKQUOTE><CODE>
+<PRE>
+ acc/ann by G,M,2
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>for american states</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ acc/ann by_state va,nh,ri,nh
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>You can use the tag 'all' to accept everything eg:</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ acc/ann all
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>but this probably for advanced users...</P>
+<H2><A NAME="ss11.3">11.3</A> <A HREF="usermanual_en.html#toc11.3">accept/spots [0-9] <pattern></A>
+</H2>
+
+<P><CODE><B>accept/spots [0-9] <pattern></B> Set an 'accept' filter line for spots</CODE></P>
+
+<P>Create an 'accept this spot' line for a filter. </P>
+<P>An accept filter line means that if the spot matches this filter it is
+passed onto the user. See HELP FILTERING for more info. Please read this
+to understand how filters work - it will save a lot of grief later on.</P>
+<P>You can use any of the following things in this line:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ freq <range> eg: 0/30000 or hf or hf/cw or 6m,4m,2m
+ on <range> same as 'freq'
+ call <prefixes> eg: G,PA,HB9
+ info <string> eg: iota or qsl
+ by <prefixes>
+ call_dxcc <prefixes or numbers> eg: 61,62 (from eg: sh/pre G)
+ call_itu <prefixes or numbers> or: G,GM,GW
+ call_zone <prefixes or numbers>
+ call_state <states> eg: VA,NH,RI,ME
+ by_dxcc <prefixes or numbers>
+ by_itu <prefixes or numbers>
+ by_zone <prefixes or numbers>
+ by_state <states> eg: VA,NH,RI,ME
+ origin <prefixes>
+ channel <prefixes>
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>'call' means the callsign that has spotted 'by' whoever.</P>
+<P>For frequencies, you can use any of the band names defined in
+SHOW/BANDS and you can use a subband name like: cw, rtty, data, ssb -
+thus: hf/ssb. You can also just have a simple range like: 0/30000 -
+this is more efficient than saying simply: freq HF (but don't get
+too hung up about that)</P>
+<P>some examples:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ acc/spot 1 on hf/cw
+ acc/spot 2 on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>You can use the tag 'all' to accept everything, eg:</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ acc/spot 3 all
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>for US states </P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ acc/spots by_state VA,NH,RI,MA,ME
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>but this probably for advanced users...</P>
+<H2><A NAME="ss11.4">11.4</A> <A HREF="usermanual_en.html#toc11.4">accept/wcy [0-9] <pattern></A>
+</H2>
+
+<P><CODE><B>accept/wcy [0-9] <pattern></B> set an 'accept' WCY filter</CODE></P>
+
+<P>It is unlikely that you will want to do this, but if you do then you can
+filter on the following fields:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ by <prefixes> eg: G,M,2
+ origin <prefixes>
+ origin_dxcc <prefixes or numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <prefixes or numbers> or: G,GM,GW
+ origin_zone <prefixes or numbers>
+ by_dxcc <prefixes or numbers>
+ by_itu <prefixes or numbers>
+ by_zone <prefixes or numbers>
+ channel <prefixes>
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>There are no examples because WCY Broadcasts only come from one place and
+you either want them or not (see UNSET/WCY if you don't want them).</P>
+<P>This command is really provided for future use.</P>
+<P>See HELP FILTER for information.</P>
+<H2><A NAME="ss11.5">11.5</A> <A HREF="usermanual_en.html#toc11.5">accept/wwv [0-9] <pattern></A>
+</H2>
+
+<P><CODE><B>accept/wwv [0-9] <pattern></B> set an 'accept' WWV filter</CODE></P>
+
+<P>It is unlikely that you will want to do this, but if you do then you can
+filter on the following fields:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ by <prefixes> eg: G,M,2
+ origin <prefixes>
+ origin_dxcc <prefixes or numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <prefixes or numbers> or: G,GM,GW
+ origin_zone <prefixes or numbers>
+ by_dxcc <prefixes or numbers>
+ by_itu <prefixes or numbers>
+ by_zone <prefixes or numbers>
+ channel <prefixes>
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>for example </P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ accept/wwv by_zone 4
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>is probably the only useful thing to do (which will only show WWV broadcasts
+by stations in the US).</P>
+<P>See HELP FILTER for information.</P>
+<H2><A NAME="ss11.6">11.6</A> <A HREF="usermanual_en.html#toc11.6">announce <text></A>
+</H2>
+
+<P><CODE><B>announce <text></B> Send an announcement to LOCAL users only</CODE></P>
+
+<P><text> is the text of the announcement you wish to broadcast </P>
+<H2><A NAME="ss11.7">11.7</A> <A HREF="usermanual_en.html#toc11.7">announce full <text></A>
+</H2>
+
+<P><CODE><B>announce full <text></B> Send an announcement cluster wide</CODE></P>
+
+<P>This will send your announcement cluster wide</P>
+<H2><A NAME="ss11.8">11.8</A> <A HREF="usermanual_en.html#toc11.8">apropos <string></A>
+</H2>
+
+<P><CODE><B>apropos <string></B> Search help database for <string></CODE></P>
+
+<P>Search the help database for <string> (it isn't case sensitive), and print
+the names of all the commands that may be relevant.</P>
+<H2><A NAME="ss11.9">11.9</A> <A HREF="usermanual_en.html#toc11.9">blank [<string>] [<nn>]</A>
+</H2>
+
+<P><CODE><B>blank [<string>] [<nn>]</B> Print nn (default 1) blank lines (or strings)</CODE></P>
+
+<P>In its basic form this command prints one or more blank lines. However if
+you pass it a string it will replicate the string for the width of the
+screen (default 80) and then print that one or more times, so:</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ blank 2
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>prints two blank lines</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ blank -
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>prints a row of - characters once.</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ blank abc
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>prints 'abcabcabcabcabcabc....'</P>
+<P>This is really only of any use in a script file and you can print a maximum
+of 9 lines.</P>
+<H2><A NAME="ss11.10">11.10</A> <A HREF="usermanual_en.html#toc11.10">bye</A>
+</H2>
+
+<P><CODE><B>bye</B> Exit from the cluster</CODE></P>
+
+<P>This will disconnect you from the cluster</P>
+<H2><A NAME="ss11.11">11.11</A> <A HREF="usermanual_en.html#toc11.11">chat <group> <text></A>
+</H2>
+
+<P><CODE><B>chat <group> <text></B> Chat or Conference to a group</CODE></P>
+
+<P>It is now possible to JOIN a group and have network wide conferencing to that
+group. DXSpider does not (and probably will not) implement the AK1A
+conference mode as this seems very limiting, is hardly used and doesn't seem
+to work too well anyway.</P>
+<P>This system uses the existing ANN system and is compatible with both other
+DXSpider nodes and AK1A clusters (they use ANN/<group>). </P>
+<P>You can be a member of as many "groups" as you want. To join a group type:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ JOIN FOC (where FOC is the group name)
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>To leave a group type:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ LEAVE FOC
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>You can see which groups you are in by typing:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ STAT/USER
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>and you can see whether your mate is in the group, if he connects to the
+same node as you, by typing:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ STAT/USER g1tlh
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>To send a message to a group type:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ CHAT FOC hello everyone
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>or</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ CH #9000 hello I am back
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>See also JOIN, LEAVE, SHOW/CHAT</P>
+<H2><A NAME="ss11.12">11.12</A> <A HREF="usermanual_en.html#toc11.12">clear/announce [1|all]</A>
+</H2>
+
+<P><CODE><B>clear/announce [1|all]</B> Clear a announce filter line</CODE></P>
+
+<P>This command allows you to clear (remove) a line in a annouce filter or to
+remove the whole filter.</P>
+<P>see CLEAR/SPOTS for a more detailed explanation.</P>
+<H2><A NAME="ss11.13">11.13</A> <A HREF="usermanual_en.html#toc11.13">clear/route [1|all]</A>
+</H2>
+
+<P><CODE><B>clear/route [1|all]</B> Clear a route filter line</CODE></P>
+
+<P>This command allows you to clear (remove) a line in a route filter or to
+remove the whole filter.</P>
+<P>see CLEAR/SPOTS for a more detailed explanation.</P>
+<H2><A NAME="ss11.14">11.14</A> <A HREF="usermanual_en.html#toc11.14">clear/spots [0-9|all]</A>
+</H2>
+
+<P><CODE><B>clear/spots [0-9|all]</B> Clear a spot filter line</CODE></P>
+
+<P>This command allows you to clear (remove) a line in a spot filter or to
+remove the whole filter.</P>
+<P>If you have a filter:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ acc/spot 1 on hf/cw
+ acc/spot 2 on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>and you say:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ clear/spot 1
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>you will be left with:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ acc/spot 2 on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>If you do:</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ clear/spot all
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>the filter will be completely removed.</P>
+<H2><A NAME="ss11.15">11.15</A> <A HREF="usermanual_en.html#toc11.15">clear/wcy [1|all]</A>
+</H2>
+
+<P><CODE><B>clear/wcy [1|all]</B> Clear a WCY filter line</CODE></P>
+
+<P>This command allows you to clear (remove) a line in a WCY filter or to
+remove the whole filter.</P>
+<P>see CLEAR/SPOTS for a more detailed explanation.</P>
+<H2><A NAME="ss11.16">11.16</A> <A HREF="usermanual_en.html#toc11.16">clear/wwv [1|all]</A>
+</H2>
+
+<P><CODE><B>clear/wwv [1|all]</B> Clear a WWV filter line</CODE></P>
+
+<P>This command allows you to clear (remove) a line in a WWV filter or to
+remove the whole filter.</P>
+<P>see CLEAR/SPOTS for a more detailed explanation.</P>
+<H2><A NAME="ss11.17">11.17</A> <A HREF="usermanual_en.html#toc11.17">dbavail</A>
+</H2>
+
+<P><CODE><B>dbavail</B> Show a list of all the Databases in the system</CODE></P>
+
+<P>Title says it all really, this command lists all the databases defined
+in the system. It is also aliased to SHOW/COMMAND.</P>
+<H2><A NAME="ss11.18">11.18</A> <A HREF="usermanual_en.html#toc11.18">dbshow <dbname> <key></A>
+</H2>
+
+<P><CODE><B>dbshow <dbname> <key></B> Display an entry, if it exists, in a database</CODE></P>
+
+<P>This is the generic user interface to the database to the database system.
+It is expected that the sysop will add an entry to the local Aliases file
+so that users can use the more familiar AK1A style of enquiry such as:</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ SH/BUCK G1TLH
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>but if he hasn't and the database really does exist (use DBAVAIL or
+SHOW/COMMAND to find out) you can do the same thing with:</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ DBSHOW buck G1TLH
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+
+<H2><A NAME="ss11.19">11.19</A> <A HREF="usermanual_en.html#toc11.19">directory</A>
+</H2>
+
+<P><CODE><B>directory</B> List messages </CODE></P>
+
+
+<H2><A NAME="ss11.20">11.20</A> <A HREF="usermanual_en.html#toc11.20">directory <from>-<to></A>
+</H2>
+
+<P><CODE><B>directory <from>-<to></B> List messages <from> message <to> message </CODE></P>
+
+<P>List the messages in the messages directory.</P>
+<P>If there is a 'p' one space after the message number then it is a
+personal message. If there is a '-' between the message number and the
+'p' then this indicates that the message has been read.</P>
+<P>You can use shell escape characters such as '*' and '?' in the <call>
+fields.</P>
+<P>You can combine some of the various directory commands together eg:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ DIR TO G1TLH 5
+</PRE>
+</CODE></BLOCKQUOTE>
+
+or
+<BLOCKQUOTE><CODE>
+<PRE>
+ DIR SUBJECT IOTA 200-250
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>You can abbreviate all the commands to one letter and use ak1a syntax:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ DIR/T G1* 10
+ DIR/S QSL 10-100 5
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+
+<H2><A NAME="ss11.21">11.21</A> <A HREF="usermanual_en.html#toc11.21">directory <nn></A>
+</H2>
+
+<P><CODE><B>directory <nn></B> List last <nn> messages</CODE></P>
+
+
+<H2><A NAME="ss11.22">11.22</A> <A HREF="usermanual_en.html#toc11.22">directory all</A>
+</H2>
+
+<P><CODE><B>directory all</B> List all messages</CODE></P>
+
+
+<H2><A NAME="ss11.23">11.23</A> <A HREF="usermanual_en.html#toc11.23">directory from <call></A>
+</H2>
+
+<P><CODE><B>directory from <call></B> List all messages from <call></CODE></P>
+
+
+<H2><A NAME="ss11.24">11.24</A> <A HREF="usermanual_en.html#toc11.24">directory new</A>
+</H2>
+
+<P><CODE><B>directory new</B> List all new messages</CODE></P>
+
+
+<H2><A NAME="ss11.25">11.25</A> <A HREF="usermanual_en.html#toc11.25">directory own</A>
+</H2>
+
+<P><CODE><B>directory own</B> List your own messages</CODE></P>
+
+
+<H2><A NAME="ss11.26">11.26</A> <A HREF="usermanual_en.html#toc11.26">directory subject <string></A>
+</H2>
+
+<P><CODE><B>directory subject <string></B> List all messages with <string> in subject</CODE></P>
+
+
+<H2><A NAME="ss11.27">11.27</A> <A HREF="usermanual_en.html#toc11.27">directory to <call></A>
+</H2>
+
+<P><CODE><B>directory to <call></B> List all messages to <call></CODE></P>
+
+
+<H2><A NAME="ss11.28">11.28</A> <A HREF="usermanual_en.html#toc11.28">dx [by <call>] <freq> <call> <remarks></A>
+</H2>
+
+<P><CODE><B>dx [by <call>] <freq> <call> <remarks></B> Send a DX spot</CODE></P>
+
+<P>This is how you send a DX Spot to other users. You can, in fact, now
+enter the <freq> and the <call> either way round. </P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ DX FR0G 144.600
+ DX 144.600 FR0G
+ DX 144600 FR0G
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>will all give the same result. You can add some remarks to the end
+of the command and they will be added to the spot.</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ DX FR0G 144600 this is a test
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>You can credit someone else by saying:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ DX by G1TLH FR0G 144.600 he isn't on the cluster
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>The <freq> is compared against the available bands set up in the
+cluster. See SHOW/BANDS for more information.</P>
+<H2><A NAME="ss11.29">11.29</A> <A HREF="usermanual_en.html#toc11.29">echo <line></A>
+</H2>
+
+<P><CODE><B>echo <line></B> Echo the line to the output</CODE></P>
+
+<P>This command is useful in scripts and so forth for printing the
+line that you give to the command to the output. You can use this
+in user_default scripts and the SAVE command for titling and so forth</P>
+<P>The script will interpret certain standard "escape" sequences as follows:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ \t - becomes a TAB character (0x09 in ascii)
+ \a - becomes a BEEP character (0x07 in ascii)
+ \n - prints a new line
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>So the following example:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ echo GB7DJK is a dxcluster
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>produces:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ GB7DJK is a dxcluster
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>on the output. You don't need a \n on the end of the line you want to send.</P>
+<P>A more complex example:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ echo GB7DJK\n\tg1tlh\tDirk\n\tg3xvf\tRichard
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>produces:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ GB7DJK
+ g1tlh Dirk
+ g3xvf Richard
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>on the output.</P>
+
+<H2><A NAME="ss11.30">11.30</A> <A HREF="usermanual_en.html#toc11.30">filtering...</A>
+</H2>
+
+<P><CODE><B>filtering...</B> Filtering things in DXSpider</CODE></P>
+
+<P>There are a number of things you can filter in the DXSpider system. They
+all use the same general mechanism.</P>
+<P>In general terms you can create a 'reject' or an 'accept' filter which
+can have up to 10 lines in it. You do this using, for example:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ accept/spots .....
+ reject/spots .....
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>where ..... are the specific commands for that type of filter. There
+are filters for spots, wwv, announce, wcy and (for sysops)
+connects. See each different accept or reject command reference for
+more details.</P>
+<P>There is also a command to clear out one or more lines in a filter and
+one to show you what you have set. They are:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ clear/spots 1
+ clear/spots all
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>and </P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ show/filter
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>There is clear/xxxx command for each type of filter.</P>
+<P>For now we are going to use spots for the examples, but you can apply
+the principles to all types of filter.</P>
+<P>There are two main types of filter 'accept' or 'reject'; which you use
+depends entirely on how you look at the world and what is least
+writing to achieve what you want. Each filter has 10 lines (of any
+length) which are tried in order. If a line matches then the action
+you have specified is taken (ie reject means ignore it and accept
+means gimme it).</P>
+<P>The important thing to remember is that if you specify a 'reject'
+filter (all the lines in it say 'reject/spots' (for instance)) then if
+a spot comes in that doesn't match any of the lines then you will get
+it BUT if you specify an 'accept' filter then any spots that don't
+match are dumped. For example if I have a one line accept filter:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ accept/spots on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>then automatically you will ONLY get VHF spots from or to CQ zones 14
+15 and 16. If you set a reject filter like:</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ reject/spots on hf/cw
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>Then you will get everything EXCEPT HF CW spots, If you am interested in IOTA
+and will work it even on CW then you could say:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ reject/spots on hf/cw and not info iota
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>But in that case you might only be interested in iota and say:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ accept/spots not on hf/cw or info iota
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>which is exactly the same. You should choose one or the other until
+you are confortable with the way it works. Yes, you can mix them
+(actually you can have an accept AND a reject on the same line) but
+don't try this at home until you can analyse the results that you get
+without ringing up the sysop for help.</P>
+<P>Another useful addition now is filtering by US state</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ accept/spots by_state VA,NH,RI,ME
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>You can arrange your filter lines into logical units, either for your
+own understanding or simply convenience. I have one set frequently:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ reject/spots 1 on hf/cw
+ reject/spots 2 on 50000/1400000 not (by_zone 14,15,16 or call_zone 14,15,16)
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>What this does is to ignore all HF CW spots (being a class B I can't
+read any CW and couldn't possibly be interested in HF :-) and also
+rejects any spots on VHF which don't either originate or spot someone
+in Europe.</P>
+<P>This is an exmaple where you would use the line number (1 and 2 in
+this case), if you leave the digit out, the system assumes '1'. Digits
+'0'-'9' are available.</P>
+<P>You can leave the word 'and' out if you want, it is implied. You can
+use any number of brackets to make the 'expression' as you want
+it. There are things called precedence rules working here which mean
+that you will NEED brackets in a situation like line 2 because,
+without it, will assume:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ (on 50000/1400000 and by_zone 14,15,16) or call_zone 14,15,16
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>annoying, but that is the way it is. If you use OR - use
+brackets. Whilst we are here CASE is not important. 'And BY_Zone' is
+just 'and by_zone'.</P>
+<P>If you want to alter your filter you can just redefine one or more
+lines of it or clear out one line. For example:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ reject/spots 1 on hf/ssb
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>or </P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ clear/spots 1
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>To remove the filter in its entirty:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ clear/spots all
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>There are similar CLEAR commands for the other filters:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ clear/announce
+ clear/wcy
+ clear/wwv
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>ADVANCED USERS:-</P>
+<P>Once you are happy with the results you get, you may like to experiment. </P>
+<P>my example that filters hf/cw spots and accepts vhf/uhf spots from EU
+can be written with a mixed filter, eg:</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ rej/spot on hf/cw
+ acc/spot on 0/30000
+ acc/spot 2 on 50000/1400000 and (by_zone 14,15,16 or call_zone 14,15,16)
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>each filter slot actually has a 'reject' slot and an 'accept'
+slot. The reject slot is executed BEFORE the accept slot.</P>
+<P>It was mentioned earlier that after a reject test that doesn't match,
+the default for following tests is 'accept', the reverse is true for
+'accept'. In the example what happens is that the reject is executed
+first, any non hf/cw spot is passed to the accept line, which lets
+thru everything else on HF.</P>
+<P>The next filter line lets through just VHF/UHF spots from EU.</P>
+<H2><A NAME="ss11.31">11.31</A> <A HREF="usermanual_en.html#toc11.31">help</A>
+</H2>
+
+<P><CODE><B>help</B> The HELP Command</CODE></P>
+
+<P>HELP is available for a number of commands. The syntax is:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ HELP <cmd>
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>Where <cmd> is the name of the command you want help on.</P>
+<P>All commands can be abbreviated, so SHOW/DX can be abbreviated
+to SH/DX, ANNOUNCE can be shortened to AN and so on.</P>
+<P>Look at the APROPOS <string> command which will search the help database
+for the <string> you specify and give you a list of likely commands
+to look at with HELP.</P>
+<H2><A NAME="ss11.32">11.32</A> <A HREF="usermanual_en.html#toc11.32">join <group></A>
+</H2>
+
+<P><CODE><B>join <group></B> Join a chat or conference group</CODE></P>
+
+<P>JOIN allows you to join a network wide conference group. To join a
+group (called FOC in this case) type:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ JOIN FOC
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>See also CHAT, LEAVE, SHOW/CHAT</P>
+<H2><A NAME="ss11.33">11.33</A> <A HREF="usermanual_en.html#toc11.33">kill <from msgno>-<to msgno></A>
+</H2>
+
+<P><CODE><B>kill <from msgno>-<to msgno></B> Delete a range of messages</CODE></P>
+
+
+<H2><A NAME="ss11.34">11.34</A> <A HREF="usermanual_en.html#toc11.34">kill <msgno> [<msgno..]</A>
+</H2>
+
+<P><CODE><B>kill <msgno> [<msgno..]</B> Delete a message from the local system</CODE></P>
+
+
+<H2><A NAME="ss11.35">11.35</A> <A HREF="usermanual_en.html#toc11.35">kill <msgno> [<msgno> ...]</A>
+</H2>
+
+<P><CODE><B>kill <msgno> [<msgno> ...]</B> Remove or erase a message from the system</CODE></P>
+
+<P>You can get rid of any message to or originating from your callsign using
+this command. You can remove more than one message at a time.</P>
+<H2><A NAME="ss11.36">11.36</A> <A HREF="usermanual_en.html#toc11.36">kill from <regex></A>
+</H2>
+
+<P><CODE><B>kill from <regex></B> Delete messages FROM a callsign or pattern</CODE></P>
+
+
+<H2><A NAME="ss11.37">11.37</A> <A HREF="usermanual_en.html#toc11.37">kill to <regex></A>
+</H2>
+
+<P><CODE><B>kill to <regex></B> Delete messages TO a callsign or pattern</CODE></P>
+
+
+<H2><A NAME="ss11.38">11.38</A> <A HREF="usermanual_en.html#toc11.38">leave <group></A>
+</H2>
+
+<P><CODE><B>leave <group></B> Leave a chat or conference group</CODE></P>
+
+<P>LEAVE allows you to leave a network wide conference group. To leave a
+group (called FOC in this case) type:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ LEAVE FOC
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>See also CHAT, JOIN, SHOW/CHAT</P>
+<H2><A NAME="ss11.39">11.39</A> <A HREF="usermanual_en.html#toc11.39">links</A>
+</H2>
+
+<P><CODE><B>links</B> Show which nodes is physically connected</CODE></P>
+
+<P>This is a quick listing that shows which links are connected and
+some information about them. See WHO for a list of all connections.</P>
+<H2><A NAME="ss11.40">11.40</A> <A HREF="usermanual_en.html#toc11.40">read</A>
+</H2>
+
+<P><CODE><B>read</B> Read the next unread personal message addressed to you</CODE></P>
+
+
+<H2><A NAME="ss11.41">11.41</A> <A HREF="usermanual_en.html#toc11.41">read <msgno></A>
+</H2>
+
+<P><CODE><B>read <msgno></B> Read the specified message</CODE></P>
+
+<P>You can read any messages that are sent as 'non-personal' and also any
+message either sent by or sent to your callsign.</P>
+<H2><A NAME="ss11.42">11.42</A> <A HREF="usermanual_en.html#toc11.42">reject</A>
+</H2>
+
+<P><CODE><B>reject</B> Set a filter to reject something</CODE></P>
+
+<P>Create a filter to reject something</P>
+<P>There are 2 types of filter, accept and reject. See HELP FILTERING for more
+info.</P>
+<H2><A NAME="ss11.43">11.43</A> <A HREF="usermanual_en.html#toc11.43">reject/announce [0-9] <pattern></A>
+</H2>
+
+<P><CODE><B>reject/announce [0-9] <pattern></B> Set a 'reject' filter line for announce</CODE></P>
+
+<P>Create an 'reject this announce' line for a filter. </P>
+<P>A reject filter line means that if the announce matches this filter it is
+passed onto the user. See HELP FILTERING for more info. Please read this
+to understand how filters work - it will save a lot of grief later on.</P>
+<P>You can use any of the following things in this line:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ info <string> eg: iota or qsl
+ by <prefixes> eg: G,M,2
+ origin <prefixes>
+ origin_dxcc <prefixes or numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <prefixes or numbers> or: G,GM,GW
+ origin_zone <prefixes or numbers>
+ origin_state <states> eg: VA,NH,RI,ME
+ by_dxcc <prefixes or numbers>
+ by_itu <prefixes or numbers>
+ by_zone <prefixes or numbers>
+ by_state <states> eg: VA,NH,RI,ME
+ channel <prefixes>
+ wx 1 filter WX announces
+ dest <prefixes> eg: 6MUK,WDX (distros)
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>some examples:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ rej/ann by_zone 14,15,16 and not by G,M,2
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>You can use the tag 'all' to reject everything eg:</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ rej/ann all
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>but this probably for advanced users...</P>
+<H2><A NAME="ss11.44">11.44</A> <A HREF="usermanual_en.html#toc11.44">reject/spots [0-9] <pattern></A>
+</H2>
+
+<P><CODE><B>reject/spots [0-9] <pattern></B> Set a 'reject' filter line for spots</CODE></P>
+
+<P>Create a 'reject this spot' line for a filter. </P>
+<P>A reject filter line means that if the spot matches this filter it is
+dumped (not passed on). See HELP FILTERING for more info. Please read this
+to understand how filters work - it will save a lot of grief later on.</P>
+<P>You can use any of the following things in this line:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ freq <range> eg: 0/30000 or hf or hf/cw or 6m,4m,2m
+ on <range> same as 'freq'
+ call <prefixes> eg: G,PA,HB9
+ info <string> eg: iota or qsl
+ by <prefixes>
+ call_dxcc <prefixes or numbers> eg: 61,62 (from eg: sh/pre G)
+ call_itu <prefixes or numbers> or: G,GM,GW
+ call_zone <prefixes or numbers>
+ call_state <states> eg: VA,NH,RI,ME
+ by_dxcc <prefixes or numbers>
+ by_itu <prefixes or numbers>
+ by_zone <prefixes or numbers>
+ by_state <states> eg: VA,NH,RI,ME
+ origin <prefixes>
+ channel <prefixes>
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>'call' means the callsign that has spotted 'by' whoever.</P>
+<P>For frequencies, you can use any of the band names defined in
+SHOW/BANDS and you can use a subband name like: cw, rtty, data, ssb -
+thus: hf/ssb. You can also just have a simple range like: 0/30000 -
+this is more efficient than saying simply: on HF (but don't get
+too hung up about that)</P>
+<P>some examples:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ rej/spot 1 on hf
+ rej/spot 2 on vhf and not (by_zone 14,15,16 or call_zone 14,15,16)
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>You can use the tag 'all' to reject everything eg:</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ rej/spot 3 all
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>but this probably for advanced users...</P>
+<H2><A NAME="ss11.45">11.45</A> <A HREF="usermanual_en.html#toc11.45">reject/wcy [0-9] <pattern></A>
+</H2>
+
+<P><CODE><B>reject/wcy [0-9] <pattern></B> set a 'reject' WCY filter</CODE></P>
+
+<P>It is unlikely that you will want to do this, but if you do then you can
+filter on the following fields:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ by <prefixes> eg: G,M,2
+ origin <prefixes>
+ origin_dxcc <prefixes or numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <prefixes or numbers> or: G,GM,GW
+ origin_zone <prefixes or numbers>
+ by_dxcc <prefixes or numbers>
+ by_itu <prefixes or numbers>
+ by_zone <prefixes or numbers>
+ channel <prefixes>
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>There are no examples because WCY Broadcasts only come from one place and
+you either want them or not (see UNSET/WCY if you don't want them).</P>
+<P>This command is really provided for future use.</P>
+<P>See HELP FILTER for information.</P>
+<H2><A NAME="ss11.46">11.46</A> <A HREF="usermanual_en.html#toc11.46">reject/wwv [0-9] <pattern></A>
+</H2>
+
+<P><CODE><B>reject/wwv [0-9] <pattern></B> set a 'reject' WWV filter</CODE></P>
+
+<P>It is unlikely that you will want to do this, but if you do then you can
+filter on the following fields:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ by <prefixes> eg: G,M,2
+ origin <prefixes>
+ origin_dxcc <prefixes or numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <prefixes or numbers> or: G,GM,GW
+ origin_zone <prefixes or numbers>
+ by_dxcc <prefixes or numbers>
+ by_itu <prefixes or numbers>
+ by_zone <prefixes or numbers>
+ channel <prefixes>
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>for example </P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ reject/wwv by_zone 14,15,16
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>is probably the only useful thing to do (which will only show WWV broadcasts
+by stations in the US).</P>
+<P>See HELP FILTER for information.</P>
+<H2><A NAME="ss11.47">11.47</A> <A HREF="usermanual_en.html#toc11.47">reply</A>
+</H2>
+
+<P><CODE><B>reply</B> Reply (privately) to the last message that you have read</CODE></P>
+
+
+<H2><A NAME="ss11.48">11.48</A> <A HREF="usermanual_en.html#toc11.48">reply <msgno></A>
+</H2>
+
+<P><CODE><B>reply <msgno></B> Reply (privately) to the specified message</CODE></P>
+
+
+<H2><A NAME="ss11.49">11.49</A> <A HREF="usermanual_en.html#toc11.49">reply b <msgno></A>
+</H2>
+
+<P><CODE><B>reply b <msgno></B> Reply as a Bulletin to the specified message</CODE></P>
+
+
+<H2><A NAME="ss11.50">11.50</A> <A HREF="usermanual_en.html#toc11.50">reply noprivate <msgno></A>
+</H2>
+
+<P><CODE><B>reply noprivate <msgno></B> Reply as a Bulletin to the specified message</CODE></P>
+
+
+<H2><A NAME="ss11.51">11.51</A> <A HREF="usermanual_en.html#toc11.51">reply rr <msgno></A>
+</H2>
+
+<P><CODE><B>reply rr <msgno></B> Reply to the specified message with read receipt</CODE></P>
+
+<P>You can reply to a message and the subject will automatically have
+"Re:" inserted in front of it, if it isn't already present.</P>
+<P>You can also use all the extra qualifiers such as RR, PRIVATE,
+NOPRIVATE, B that you can use with the SEND command (see SEND
+for further details)</P>
+<H2><A NAME="ss11.52">11.52</A> <A HREF="usermanual_en.html#toc11.52">send <call> [<call> ...]</A>
+</H2>
+
+<P><CODE><B>send <call> [<call> ...]</B> Send a message to one or more callsigns</CODE></P>
+
+
+<H2><A NAME="ss11.53">11.53</A> <A HREF="usermanual_en.html#toc11.53">send copy <msgno> <call></A>
+</H2>
+
+<P><CODE><B>send copy <msgno> <call></B> Send a copy of a message to someone</CODE></P>
+
+
+<H2><A NAME="ss11.54">11.54</A> <A HREF="usermanual_en.html#toc11.54">send noprivate <call></A>
+</H2>
+
+<P><CODE><B>send noprivate <call></B> Send a message to all stations</CODE></P>
+
+<P>All the SEND commands will create a message which will be sent either to
+an individual callsign or to one of the 'bulletin' addresses. </P>
+<P>SEND <call> on its own acts as though you had typed SEND PRIVATE, that is
+it will mark the message as personal and send it to the cluster node that
+that callsign is connected to. If the <call> you have specified is in fact
+a known bulletin category on your node (eg: ALL) then the message should
+automatically become a bulletin.</P>
+<P>You can have more than one callsign in all of the SEND commands.</P>
+<P>You can have multiple qualifiers so that you can have for example:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ SEND RR COPY 123 PRIVATE G1TLH G0RDI
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>which should send a copy of message 123 to G1TLH and G0RDI and you will
+receive a read receipt when they have read the message.</P>
+<P>SB is an alias for SEND NOPRIVATE (or send a bulletin in BBS speak)
+SP is an alias for SEND PRIVATE</P>
+<P>The system will ask you for a subject. Conventionally this should be
+no longer than 29 characters for compatibility. Most modern cluster
+software should accept more.</P>
+<P>You will now be prompted to start entering your text. </P>
+<P>You finish the message by entering '/EX' on a new line. For instance:</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ ...
+ bye then Jim
+ 73 Dirk
+ /ex
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>If you have started a message and you don't want to keep it then you
+can abandon the message with '/ABORT' on a new line, like:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ line 1
+ line 2
+ oh I just can't be bothered with this
+ /abort
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>If you abort the message it will NOT be sent.</P>
+<P>When you are entering the text of your message, most normal output (such
+as DX announcements and so on are suppressed and stored for latter display
+(upto 20 such lines are stored, as new ones come along, so the oldest
+lines are dropped).</P>
+<P>Also, you can enter normal commands commands (and get the output
+immediately) whilst in the middle of a message. You do this by typing
+the command preceeded by a '/' character on a new line, so:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ /dx g1tlh 144010 strong signal
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>Will issue a dx annoucement to the rest of the cluster. </P>
+<P>Also, you can add the output of a command to your message by preceeding
+the command with '//', thus :-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ //sh/vhftable
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>This will show YOU the output from SH/VHFTABLE and also store it in the
+message. </P>
+<P>You can carry on with the message until you are ready to send it. </P>
+<H2><A NAME="ss11.55">11.55</A> <A HREF="usermanual_en.html#toc11.55">send private <call></A>
+</H2>
+
+<P><CODE><B>send private <call></B> Send a personal message</CODE></P>
+
+
+<H2><A NAME="ss11.56">11.56</A> <A HREF="usermanual_en.html#toc11.56">send rr <call></A>
+</H2>
+
+<P><CODE><B>send rr <call></B> Send a message and ask for a read receipt</CODE></P>
+
+
+<H2><A NAME="ss11.57">11.57</A> <A HREF="usermanual_en.html#toc11.57">set/address <your address></A>
+</H2>
+
+<P><CODE><B>set/address <your address></B> Record your postal address</CODE></P>
+
+
+<H2><A NAME="ss11.58">11.58</A> <A HREF="usermanual_en.html#toc11.58">set/announce</A>
+</H2>
+
+<P><CODE><B>set/announce</B> Allow announce messages to come out on your terminal</CODE></P>
+
+
+<H2><A NAME="ss11.59">11.59</A> <A HREF="usermanual_en.html#toc11.59">set/anntalk</A>
+</H2>
+
+<P><CODE><B>set/anntalk</B> Allow talk like announce messages on your terminal</CODE></P>
+
+
+<H2><A NAME="ss11.60">11.60</A> <A HREF="usermanual_en.html#toc11.60">set/beep</A>
+</H2>
+
+<P><CODE><B>set/beep</B> Add a beep to DX and other messages on your terminal</CODE></P>
+
+
+<H2><A NAME="ss11.61">11.61</A> <A HREF="usermanual_en.html#toc11.61">set/dx</A>
+</H2>
+
+<P><CODE><B>set/dx</B> Allow DX messages to come out on your terminal</CODE></P>
+
+
+<H2><A NAME="ss11.62">11.62</A> <A HREF="usermanual_en.html#toc11.62">set/dxcq</A>
+</H2>
+
+<P><CODE><B>set/dxcq</B> Show CQ Zones on the end of DX announcements</CODE></P>
+
+
+<H2><A NAME="ss11.63">11.63</A> <A HREF="usermanual_en.html#toc11.63">set/dxgrid</A>
+</H2>
+
+<P><CODE><B>set/dxgrid</B> Allow QRA Grid Squares on the end of DX announcements</CODE></P>
+
+
+<H2><A NAME="ss11.64">11.64</A> <A HREF="usermanual_en.html#toc11.64">set/dxitu</A>
+</H2>
+
+<P><CODE><B>set/dxitu</B> Show ITU Zones on the end of DX announcements</CODE></P>
+
+
+<H2><A NAME="ss11.65">11.65</A> <A HREF="usermanual_en.html#toc11.65">set/echo</A>
+</H2>
+
+<P><CODE><B>set/echo</B> Make the cluster echo your input</CODE></P>
+
+
+<H2><A NAME="ss11.66">11.66</A> <A HREF="usermanual_en.html#toc11.66">set/email <email> ...</A>
+</H2>
+
+<P><CODE><B>set/email <email> ...</B> Set email address(es) and forward your personals</CODE></P>
+
+
+<H2><A NAME="ss11.67">11.67</A> <A HREF="usermanual_en.html#toc11.67">set/here</A>
+</H2>
+
+<P><CODE><B>set/here</B> Tell the system you are present at your terminal</CODE></P>
+
+
+<H2><A NAME="ss11.68">11.68</A> <A HREF="usermanual_en.html#toc11.68">set/homenode <node> </A>
+</H2>
+
+<P><CODE><B>set/homenode <node> </B> Set your normal cluster callsign</CODE></P>
+
+<P>Tell the cluster system where you normally connect to. Any Messages sent
+to you will normally find their way there should you not be connected.
+eg:-
+<BLOCKQUOTE><CODE>
+<PRE>
+ SET/HOMENODE gb7djk
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+
+<H2><A NAME="ss11.69">11.69</A> <A HREF="usermanual_en.html#toc11.69">set/language <lang></A>
+</H2>
+
+<P><CODE><B>set/language <lang></B> Set the language you want to use</CODE></P>
+
+<P>You can select the language that you want the cluster to use. Currently
+the languages available are en (English), de (German), es (Spanish)
+and nl (Dutch).</P>
+<H2><A NAME="ss11.70">11.70</A> <A HREF="usermanual_en.html#toc11.70">set/location <lat & long></A>
+</H2>
+
+<P><CODE><B>set/location <lat & long></B> Set your latitude and longitude</CODE></P>
+
+
+<H2><A NAME="ss11.71">11.71</A> <A HREF="usermanual_en.html#toc11.71">set/logininfo</A>
+</H2>
+
+<P><CODE><B>set/logininfo</B> Inform when a station logs in locally</CODE></P>
+
+
+<H2><A NAME="ss11.72">11.72</A> <A HREF="usermanual_en.html#toc11.72">set/name <your name></A>
+</H2>
+
+<P><CODE><B>set/name <your name></B> Set your name</CODE></P>
+
+<P>Tell the system what your name is eg:-
+<BLOCKQUOTE><CODE>
+<PRE>
+ SET/NAME Dirk
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+
+<H2><A NAME="ss11.73">11.73</A> <A HREF="usermanual_en.html#toc11.73">set/page <lines per page></A>
+</H2>
+
+<P><CODE><B>set/page <lines per page></B> Set the lines per page</CODE></P>
+
+<P>Tell the system how many lines you wish on a page when the number of line
+of output from a command is more than this. The default is 20. Setting it
+explicitly to 0 will disable paging.
+<BLOCKQUOTE><CODE>
+<PRE>
+ SET/PAGE 30
+ SET/PAGE 0
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>The setting is stored in your user profile.</P>
+<H2><A NAME="ss11.74">11.74</A> <A HREF="usermanual_en.html#toc11.74">set/password</A>
+</H2>
+
+<P><CODE><B>set/password</B> Set your own password</CODE></P>
+
+<P>This command only works for a 'telnet' user (currently). It will
+only work if you have a password already set. This initial password
+can only be set by the sysop.</P>
+<P>When you execute this command it will ask you for your old password,
+then ask you to type in your new password twice (to make sure you
+get it right). You may or may not see the data echoed on the screen
+as you type, depending on the type of telnet client you have.</P>
+<H2><A NAME="ss11.75">11.75</A> <A HREF="usermanual_en.html#toc11.75">set/prompt <string></A>
+</H2>
+
+<P><CODE><B>set/prompt <string></B> Set your prompt to <string></CODE></P>
+
+
+<H2><A NAME="ss11.76">11.76</A> <A HREF="usermanual_en.html#toc11.76">set/qra <locator></A>
+</H2>
+
+<P><CODE><B>set/qra <locator></B> Set your QRA Grid locator</CODE></P>
+
+<P>Tell the system what your QRA (or Maidenhead) locator is. If you have not
+done a SET/LOCATION then your latitude and longitude will be set roughly
+correctly (assuming your locator is correct ;-). For example:-
+<BLOCKQUOTE><CODE>
+<PRE>
+ SET/QRA JO02LQ
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+
+<H2><A NAME="ss11.77">11.77</A> <A HREF="usermanual_en.html#toc11.77">set/qth <your qth></A>
+</H2>
+
+<P><CODE><B>set/qth <your qth></B> Set your QTH</CODE></P>
+
+<P>Tell the system where you are. For example:-
+<BLOCKQUOTE><CODE>
+<PRE>
+ SET/QTH East Dereham, Norfolk
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+
+<H2><A NAME="ss11.78">11.78</A> <A HREF="usermanual_en.html#toc11.78">set/talk</A>
+</H2>
+
+<P><CODE><B>set/talk</B> Allow TALK messages to come out on your terminal</CODE></P>
+
+
+<H2><A NAME="ss11.79">11.79</A> <A HREF="usermanual_en.html#toc11.79">set/usstate</A>
+</H2>
+
+<P><CODE><B>set/usstate</B> Allow US State info on the end of DX announcements</CODE></P>
+
+
+<H2><A NAME="ss11.80">11.80</A> <A HREF="usermanual_en.html#toc11.80">set/wcy</A>
+</H2>
+
+<P><CODE><B>set/wcy</B> Allow WCY messages to come out on your terminal</CODE></P>
+
+
+<H2><A NAME="ss11.81">11.81</A> <A HREF="usermanual_en.html#toc11.81">set/wwv</A>
+</H2>
+
+<P><CODE><B>set/wwv</B> Allow WWV messages to come out on your terminal</CODE></P>
+
+
+<H2><A NAME="ss11.82">11.82</A> <A HREF="usermanual_en.html#toc11.82">set/wx</A>
+</H2>
+
+<P><CODE><B>set/wx</B> Allow WX messages to come out on your terminal</CODE></P>
+
+
+<H2><A NAME="ss11.83">11.83</A> <A HREF="usermanual_en.html#toc11.83">show/chat [<group>] [<lines>]</A>
+</H2>
+
+<P><CODE><B>show/chat [<group>] [<lines>]</B> Show any chat or conferencing </CODE></P>
+
+<P>This command allows you to see any chat or conferencing that has
+occurred whilst you were away. SHOW/CHAT on its own will show data for
+all groups. If you use a group name then it will show only chat for
+that group.</P>
+<H2><A NAME="ss11.84">11.84</A> <A HREF="usermanual_en.html#toc11.84">show/configuration [<node>]</A>
+</H2>
+
+<P><CODE><B>show/configuration [<node>]</B> Show all the nodes and users visible</CODE></P>
+
+<P>This command allows you to see all the users that can be seen
+and the nodes to which they are connected.</P>
+<P>This command is normally abbreviated to: sh/c</P>
+<P>Normally, the list returned will be just for the nodes from your
+country (because the list otherwise will be very long).</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ SH/C ALL
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>will produce a complete list of all nodes. </P>
+<P>BE WARNED: the list that is returned can be VERY long</P>
+<P>It is possible to supply a node or part of a prefix and you will get
+a list of the users for that node or list of nodes starting with
+that prefix.</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ SH/C GB7DJK
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ SH/C SK
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+
+<H2><A NAME="ss11.85">11.85</A> <A HREF="usermanual_en.html#toc11.85">show/configuration/node</A>
+</H2>
+
+<P><CODE><B>show/configuration/node</B> Show all the nodes connected locally</CODE></P>
+
+<P>Show all the nodes connected to this node.</P>
+<H2><A NAME="ss11.86">11.86</A> <A HREF="usermanual_en.html#toc11.86">show/contest <year and month></A>
+</H2>
+
+<P><CODE><B>show/contest <year and month></B> Show all the contests for a month</CODE></P>
+
+<P>Show all known contests which are maintained at http://www.sk3bg.se/contest/
+for a particular month or year. The format is reasonably flexible.
+For example:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ SH/CONTEST sep2003
+ SH/CONTEST 03 march
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+
+<H2><A NAME="ss11.87">11.87</A> <A HREF="usermanual_en.html#toc11.87">show/date [<prefix>|<callsign>]</A>
+</H2>
+
+<P><CODE><B>show/date [<prefix>|<callsign>]</B> Show the local time </CODE></P>
+
+<P>This is very nearly the same as SHOW/TIME, the only difference the format
+of the date string if no arguments are given.</P>
+<P>If no prefixes or callsigns are given then this command returns the local
+time and UTC as the computer has it right now. If you give some prefixes
+then it will show UTC and UTC + the local offset (not including DST) at
+the prefixes or callsigns that you specify.</P>
+<H2><A NAME="ss11.88">11.88</A> <A HREF="usermanual_en.html#toc11.88">show/db0sdx <callsign></A>
+</H2>
+
+<P><CODE><B>show/db0sdx <callsign></B> Show QSL infomation from DB0SDX database</CODE></P>
+
+<P>This command queries the DB0SDX QSL server on the internet
+and returns any information available for that callsign. This service
+is provided for users of this software by http://www.qslinfo.de.</P>
+<P>See also SHOW/QRZ, SHOW/WM7D.</P>
+<H2><A NAME="ss11.89">11.89</A> <A HREF="usermanual_en.html#toc11.89">show/dx</A>
+</H2>
+
+<P><CODE><B>show/dx</B> Interrogate the spot database</CODE></P>
+
+<P>If you just type SHOW/DX you will get the last so many spots
+(sysop configurable, but usually 10).</P>
+<P>In addition you can add any number of these commands in very nearly
+any order to the basic SHOW/DX command, they are:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ on <band> - eg 160m 20m 2m 23cm 6mm
+ on <region> - eg hf vhf uhf shf (see SHOW/BANDS)
+ on <from>/<to> - eg 1000/4000 14000-30000 (in Khz)
+ <from>-<to>
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ <number> - the number of spots you want
+ <from>-<to> - <from> spot no <to> spot no in the selected list
+ <from>/<to>
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ <prefix> - for a spotted callsign beginning with <prefix>
+ *<suffix> - for a spotted callsign ending in <suffix>
+ *<string>* - for a spotted callsign containing <string>
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ day <number> - starting <number> days ago
+ day <from>-<to> - <from> days <to> days ago
+ <from>/<to>
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ info <text> - any spots containing <text> in the info or remarks
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ by <call> - any spots spotted by <call> (spotter <call> is the
+ same).
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ qsl - this automatically looks for any qsl info on the call
+ held in the spot database.
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ iota [<iota>] - If the iota island number is missing it will look for
+ the string iota and anything which looks like an iota
+ island number. If you specify then it will look for
+ that island.
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ qra [<locator>] - this will look for the specific locator if you specify
+ one or else anything that looks like a locator.
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ dxcc - treat the prefix as a 'country' and look for spots
+ from that country regardless of actual prefix.
+ eg dxcc oq2
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ You can also use this with the 'by' keyword so
+ eg by W dxcc
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ e.g.
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ SH/DX 9m0
+ SH/DX on 20m info iota
+ SH/DX 9a on vhf day 30
+ SH/DX rf1p qsl
+ SH/DX iota
+ SH/DX iota eu-064
+ SH/DX qra jn86
+ SH/DX dxcc oq2
+ SH/DX dxcc oq2 by w dxcc
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+
+<H2><A NAME="ss11.90">11.90</A> <A HREF="usermanual_en.html#toc11.90">show/dxcc <prefix></A>
+</H2>
+
+<P><CODE><B>show/dxcc <prefix></B> Interrogate the spot database by country</CODE></P>
+
+<P>This command takes the <prefix> (which can be a full or partial
+callsign if desired), looks up which internal country number it is
+and then displays all the spots as per SH/DX for that country.</P>
+<P>This is now an alias for 'SHOW/DX DXCC' </P>
+<P>The options for SHOW/DX also apply to this command.
+e.g. </P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ SH/DXCC G
+ SH/DXCC W on 20m iota
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>This can be done with the SHOW/DX command like this:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ SH/DX dxcc g
+ SH/DX dxcc w on 20m iota
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+
+<H2><A NAME="ss11.91">11.91</A> <A HREF="usermanual_en.html#toc11.91">show/dxqsl <callsign></A>
+</H2>
+
+<P><CODE><B>show/dxqsl <callsign></B> Show any QSL info gathered from spots</CODE></P>
+
+<P>The node collects information from the comment fields in spots (things
+like 'VIA EA7WA' or 'QSL-G1TLH') and stores these in a database.</P>
+<P>This command allows you to interrogate that database and if the callsign
+is found will display the manager(s) that people have spotted. This
+information is NOT reliable, but it is normally reasonably accurate if
+it is spotted enough times.</P>
+<P>For example:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ sh/dxqsl 4k9w
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>You can check the raw input spots yourself with:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ sh/dx 4k9w qsl
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>This gives you more background information.</P>
+<H2><A NAME="ss11.92">11.92</A> <A HREF="usermanual_en.html#toc11.92">show/dxstats [days] [date]</A>
+</H2>
+
+<P><CODE><B>show/dxstats [days] [date]</B> Show the DX Statistics</CODE></P>
+
+<P>Show the total DX spots for the last <days> no of days (default is 31),
+starting from a <date> (default: today).</P>
+<H2><A NAME="ss11.93">11.93</A> <A HREF="usermanual_en.html#toc11.93">show/files [<filearea> [<string>]]</A>
+</H2>
+
+<P><CODE><B>show/files [<filearea> [<string>]]</B> List the contents of a filearea</CODE></P>
+
+<P>SHOW/FILES on its own will show you a list of the various fileareas
+available on the system. To see the contents of a particular file
+area type:-
+<BLOCKQUOTE><CODE>
+<PRE>
+ SH/FILES <filearea>
+</PRE>
+</CODE></BLOCKQUOTE>
+
+where <filearea> is the name of the filearea you want to see the
+contents of.</P>
+<P>You can also use shell globbing characters like '*' and '?' in a
+string to see a selection of files in a filearea eg:-
+<BLOCKQUOTE><CODE>
+<PRE>
+ SH/FILES bulletins arld*
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>See also TYPE - to see the contents of a file.</P>
+<H2><A NAME="ss11.94">11.94</A> <A HREF="usermanual_en.html#toc11.94">show/filter</A>
+</H2>
+
+<P><CODE><B>show/filter</B> Show the contents of all the filters you have set</CODE></P>
+
+<P>Show the contents of all the filters that are set. This command displays
+all the filters set - for all the various categories.</P>
+<H2><A NAME="ss11.95">11.95</A> <A HREF="usermanual_en.html#toc11.95">show/hfstats [days] [date]</A>
+</H2>
+
+<P><CODE><B>show/hfstats [days] [date]</B> Show the HF DX Statistics </CODE></P>
+
+<P>Show the HF DX spots breakdown by band for the last <days> no of days
+(default is 31), starting from a <date> (default: today).</P>
+<H2><A NAME="ss11.96">11.96</A> <A HREF="usermanual_en.html#toc11.96">show/hftable [days] [date] [prefix ...]</A>
+</H2>
+
+<P><CODE><B>show/hftable [days] [date] [prefix ...]</B> Show the HF DX Spotter Table</CODE></P>
+
+<P>Show the HF DX Spotter table for the list of prefixes for the last
+<days> no of days (default is 31), starting from a <date> (default: today).</P>
+<P>If there are no prefixes then it will show the table for your country.</P>
+<P>Remember that some countries have more than one "DXCC country" in them
+(eg G :-), to show them (assuming you are not in G already which is
+specially treated in the code) you must list all the relevant prefixes</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ sh/hftable g gm gd gi gj gw gu
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>Note that the prefixes are converted into country codes so you don't have
+to list all possible prefixes for each country.</P>
+<P>If you want more or less days than the default simply include the
+number you require:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ sh/hftable 20 pa
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>If you want to start at a different day, simply add the date in some
+recognizable form:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ sh/hftable 2 25nov02
+ sh/hftable 2 25-nov-02
+ sh/hftable 2 021125
+ sh/hftable 2 25/11/02
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>This will show the stats for your DXCC for that CQWW contest weekend. </P>
+<P>You can specify either prefixes or full callsigns (so you can see how you
+did against all your mates). You can also say 'all' which will then print
+the worldwide statistics.</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ sh/hftable all
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+
+<H2><A NAME="ss11.97">11.97</A> <A HREF="usermanual_en.html#toc11.97">show/moon [ndays] [<prefix>|<callsign>]</A>
+</H2>
+
+<P><CODE><B>show/moon [ndays] [<prefix>|<callsign>]</B> Show Moon rise and set times</CODE></P>
+
+<P>Show the Moon rise and set times for a (list of) prefixes or callsigns,
+together with the azimuth and elevation of the sun currently at those
+locations.</P>
+<P>If you don't specify any prefixes or callsigns, it will show the times for
+your QTH (assuming you have set it with either SET/LOCATION or SET/QRA),
+together with the current azimuth and elevation.</P>
+<P>In addition, it will show the illuminated fraction of the moons disk.</P>
+<P>If all else fails it will show the Moonrise and set times for the node
+that you are connected to. </P>
+<P>For example:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ SH/MOON
+ SH/MOON G1TLH W5UN
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>You can also use this command to see into the past or the future, so
+if you want to see yesterday's times then do:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ SH/MOON -1
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>or in three days time:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ SH/MOON +3 W9
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>Upto 366 days can be checked both in the past and in the future.</P>
+<P>Please note that the rise and set times are given as the UT times of rise and
+set on the requested UT day.</P>
+<H2><A NAME="ss11.98">11.98</A> <A HREF="usermanual_en.html#toc11.98">show/muf <prefix> [<hours>][long]</A>
+</H2>
+
+<P><CODE><B>show/muf <prefix> [<hours>][long]</B> Show the likely propagation to a prefix</CODE></P>
+
+<P>This command allow you to estimate the likelihood of you contacting
+a station with the prefix you have specified. The output assumes a modest
+power of 20dBW and receiver sensitivity of -123dBm (about 0.15muV/10dB SINAD)</P>
+<P>The result predicts the most likely operating frequencies and signal
+levels for high frequency (shortwave) radio propagation paths on
+specified days of the year and hours of the day. It is most useful for
+paths between 250 km and 6000 km, but can be used with reduced accuracy
+for paths shorter or longer than this.</P>
+<P>The command uses a routine MINIMUF 3.5 developed by the U.S. Navy and
+used to predict the MUF given the predicted flux, day of the year,
+hour of the day and geographic coordinates of the transmitter and
+receiver. This routine is reasonably accurate for the purposes here,
+with a claimed RMS error of 3.8 MHz, but much smaller and less complex
+than the programs used by major shortwave broadcasting organizations,
+such as the Voice of America.</P>
+<P>The command will display some header information detailing its
+assumptions, together with the locations, latitude and longitudes and
+bearings. It will then show UTC (UT), local time at the other end
+(LT), calculate the MUFs, Sun zenith angle at the midpoint of the path
+(Zen) and the likely signal strengths. Then for each frequency for which
+the system thinks there is a likelihood of a circuit it prints a value.</P>
+<P>The value is currently a likely S meter reading based on the conventional
+6dB / S point scale. If the value has a '+' appended it means that it is
+1/2 an S point stronger. If the value is preceeded by an 'm' it means that
+there is likely to be much fading and by an 's' that the signal is likely
+to be noisy. </P>
+<P>By default SHOW/MUF will show the next two hours worth of data. You
+can specify anything up to 24 hours worth of data by appending the no of
+hours required after the prefix. For example:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ SH/MUF W
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>produces:</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ RxSens: -123 dBM SFI: 159 R: 193 Month: 10 Day: 21
+ Power : 20 dBW Distance: 6283 km Delay: 22.4 ms
+ Location Lat / Long Azim
+ East Dereham, Norfolk 52 41 N 0 57 E 47
+ United-States-W 43 0 N 87 54 W 299
+ UT LT MUF Zen 1.8 3.5 7.0 10.1 14.0 18.1 21.0 24.9 28.0 50.0
+ 18 23 11.5 -35 mS0+ mS2 S3
+ 19 0 11.2 -41 mS0+ mS2 S3
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>indicating that you will have weak, fading circuits on top band and
+80m but usable signals on 40m (about S3).</P>
+<P>inputing:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ SH/MUF W 24
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>will get you the above display, but with the next 24 hours worth of
+propagation data.</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ SH/MUF W L 24
+ SH/MUF W 24 Long
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>Gives you an estimate of the long path propagation characterics. It
+should be noted that the figures will probably not be very useful, nor
+terrible accurate, but it is included for completeness.</P>
+<H2><A NAME="ss11.99">11.99</A> <A HREF="usermanual_en.html#toc11.99">show/newconfiguration [<node>]</A>
+</H2>
+
+<P><CODE><B>show/newconfiguration [<node>]</B> Show all the nodes and users visible</CODE></P>
+
+<P>This command allows you to see all the users that can be seen
+and the nodes to which they are connected. </P>
+<P>This command produces essentially the same information as
+SHOW/CONFIGURATION except that it shows all the duplication of
+any routes that might be present It also uses a different format
+which may not take up quite as much space if you don't have any
+loops.</P>
+<P>BE WARNED: the list that is returned can be VERY long</P>
+<H2><A NAME="ss11.100">11.100</A> <A HREF="usermanual_en.html#toc11.100">show/newconfiguration/node</A>
+</H2>
+
+<P><CODE><B>show/newconfiguration/node</B> Show all the nodes connected locally</CODE></P>
+
+<P>Show all the nodes connected to this node in the new format.</P>
+<H2><A NAME="ss11.101">11.101</A> <A HREF="usermanual_en.html#toc11.101">show/prefix <callsign></A>
+</H2>
+
+<P><CODE><B>show/prefix <callsign></B> Interrogate the prefix database </CODE></P>
+
+<P>This command takes the <callsign> (which can be a full or partial
+callsign or a prefix), looks up which internal country number
+it is and then displays all the relevant prefixes for that country
+together with the internal country no, the CQ and ITU regions. </P>
+<P>See also SHOW/DXCC</P>
+<H2><A NAME="ss11.102">11.102</A> <A HREF="usermanual_en.html#toc11.102">show/qra <lat> <long></A>
+</H2>
+
+<P><CODE><B>show/qra <lat> <long></B> Convert lat/long to a QRA Grid locator</CODE></P>
+
+<P>This is a multipurpose command that allows you either to calculate the
+distance and bearing between two locators or (if only one locator is
+given on the command line) the distance and beraing from your station
+to the locator. For example:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ SH/QRA IO92QL
+ SH/QRA JN06 IN73
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>The first example will show the distance and bearing to the locator from
+yourself, the second example will calculate the distance and bearing from
+the first locator to the second. You can use 4 or 6 character locators.</P>
+<P>It is also possible to convert a latitude and longitude to a locator by
+using this command with a latitude and longitude as an argument, for
+example:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ SH/QRA 52 41 N 0 58 E
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+
+<H2><A NAME="ss11.103">11.103</A> <A HREF="usermanual_en.html#toc11.103">show/qra <locator> [<locator>]</A>
+</H2>
+
+<P><CODE><B>show/qra <locator> [<locator>]</B> Show distance between QRA Grid locators</CODE></P>
+
+
+<H2><A NAME="ss11.104">11.104</A> <A HREF="usermanual_en.html#toc11.104">show/qrz <callsign></A>
+</H2>
+
+<P><CODE><B>show/qrz <callsign></B> Show any callbook details on a callsign</CODE></P>
+
+<P>This command queries the QRZ callbook server on the internet
+and returns any information available for that callsign. This service
+is provided for users of this software by http://www.qrz.com </P>
+<P>See also SHOW/WM7D for an alternative.</P>
+<H2><A NAME="ss11.105">11.105</A> <A HREF="usermanual_en.html#toc11.105">show/route <callsign> ...</A>
+</H2>
+
+<P><CODE><B>show/route <callsign> ...</B> Show the route to the callsign</CODE></P>
+
+<P>This command allows you to see to which node the callsigns specified are
+connected. It is a sort of inverse sh/config.</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ sh/route n2tly
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+
+<H2><A NAME="ss11.106">11.106</A> <A HREF="usermanual_en.html#toc11.106">show/satellite <name> [<hours> <interval>]</A>
+</H2>
+
+<P><CODE><B>show/satellite <name> [<hours> <interval>]</B> Show tracking data</CODE></P>
+
+<P>Show the tracking data from your location to the satellite of your choice
+from now on for the next few hours.</P>
+<P>If you use this command without a satellite name it will display a list
+of all the satellites known currently to the system. </P>
+<P>If you give a name then you can obtain tracking data of all the passes
+that start and finish 5 degrees below the horizon. As default it will
+give information for the next three hours for every five minute period.</P>
+<P>You can alter the number of hours and the step size, within certain
+limits. </P>
+<P>Each pass in a period is separated with a row of '-----' characters</P>
+<P>So for example:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ SH/SAT AO-10
+ SH/SAT FENGYUN1 12 2
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+
+<H2><A NAME="ss11.107">11.107</A> <A HREF="usermanual_en.html#toc11.107">show/station [<callsign> ..]</A>
+</H2>
+
+<P><CODE><B>show/station [<callsign> ..]</B> Show information about a callsign</CODE></P>
+
+<P>Show the information known about a callsign and whether (and where)
+that callsign is connected to the cluster.</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ SH/ST G1TLH
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>If no callsign is given then show the information for yourself.</P>
+<H2><A NAME="ss11.108">11.108</A> <A HREF="usermanual_en.html#toc11.108">show/sun [ndays] [<prefix>|<callsign>]</A>
+</H2>
+
+<P><CODE><B>show/sun [ndays] [<prefix>|<callsign>]</B> Show sun rise and set times</CODE></P>
+
+<P>Show the sun rise and set times for a (list of) prefixes or callsigns,
+together with the azimuth and elevation of the sun currently at those
+locations.</P>
+<P>If you don't specify any prefixes or callsigns, it will show the times for
+your QTH (assuming you have set it with either SET/LOCATION or SET/QRA),
+together with the current azimuth and elevation.</P>
+<P>If all else fails it will show the sunrise and set times for the node
+that you are connected to. </P>
+<P>For example:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ SH/SUN
+ SH/SUN G1TLH K9CW ZS
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>You can also use this command to see into the past or the future, so
+if you want to see yesterday's times then do:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ SH/SUN -1
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>or in three days time:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ SH/SUN +3 W9
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>Upto 366 days can be checked both in the past and in the future.</P>
+<P>Please note that the rise and set times are given as the UT times of rise
+and set on the requested UT day.</P>
+<H2><A NAME="ss11.109">11.109</A> <A HREF="usermanual_en.html#toc11.109">show/time [<prefix>|<callsign>]</A>
+</H2>
+
+<P><CODE><B>show/time [<prefix>|<callsign>]</B> Show the local time </CODE></P>
+
+<P>If no prefixes or callsigns are given then this command returns the local
+time and UTC as the computer has it right now. If you give some prefixes
+then it will show UTC and UTC + the local offset (not including DST) at
+the prefixes or callsigns that you specify.</P>
+<H2><A NAME="ss11.110">11.110</A> <A HREF="usermanual_en.html#toc11.110">show/usdb [call ..]</A>
+</H2>
+
+<P><CODE><B>show/usdb [call ..]</B> Show information held on the FCC Call database</CODE></P>
+
+<P>Show the City and State of a Callsign held on the FCC database if
+his is being run on this system, eg:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ sh/usdb k1xx
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+
+<H2><A NAME="ss11.111">11.111</A> <A HREF="usermanual_en.html#toc11.111">show/vhfstats [days] [date]</A>
+</H2>
+
+<P><CODE><B>show/vhfstats [days] [date]</B> Show the VHF DX Statistics</CODE></P>
+
+<P>Show the VHF DX spots breakdown by band for the last
+<days> no of days (default is 31), starting from a date (default: today).</P>
+<H2><A NAME="ss11.112">11.112</A> <A HREF="usermanual_en.html#toc11.112">show/vhftable [days] [date] [prefix ...]</A>
+</H2>
+
+<P><CODE><B>show/vhftable [days] [date] [prefix ...]</B> Show the VHF DX Spotter Table</CODE></P>
+
+<P>Show the VHF DX Spotter table for the list of prefixes for the last
+<days> no of days (default is 31), starting from a date (default: today).</P>
+<P>If there are no prefixes then it will show the table for your country.</P>
+<P>Remember that some countries have more than one "DXCC country" in them
+(eg G :-), to show them (assuming you are not in G already which is
+specially treated in the code) you must list all the relevant prefixes</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ sh/vhftable g gm gd gi gj gw gu
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>Note that the prefixes are converted into country codes so you don't have
+to list all possible prefixes for each country.</P>
+<P>If you want more or less days than the default simply include the
+number you require:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ sh/vhftable 20 pa
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>If you want to start at a different day, simply add the date in some
+recognizable form:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ sh/vhftable 2 25nov02
+ sh/vhftable 2 25-nov-02
+ sh/vhftable 2 021125
+ sh/vhftable 2 25/11/02
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>This will show the stats for your DXCC for that CQWW contest weekend. </P>
+<P>You can specify either prefixes or full callsigns (so you can see how you
+did against all your mates). You can also say 'all' which will then print
+the worldwide statistics.</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ sh/vhftable all
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+
+<H2><A NAME="ss11.113">11.113</A> <A HREF="usermanual_en.html#toc11.113">show/wcy</A>
+</H2>
+
+<P><CODE><B>show/wcy</B> Show last 10 WCY broadcasts</CODE></P>
+
+
+<H2><A NAME="ss11.114">11.114</A> <A HREF="usermanual_en.html#toc11.114">show/wcy <n></A>
+</H2>
+
+<P><CODE><B>show/wcy <n></B> Show last <n> WCY broadcasts</CODE></P>
+
+<P>Display the most recent WCY information that has been received by the system</P>
+
+<H2><A NAME="ss11.115">11.115</A> <A HREF="usermanual_en.html#toc11.115">show/wm7d <callsign></A>
+</H2>
+
+<P><CODE><B>show/wm7d <callsign></B> Show callbook details on a US callsigns</CODE></P>
+
+<P>This command queries the WM7D callbook server on the internet
+and returns any information available for that US callsign. This service
+is provided for users of this software by http://www.wm7d.net.</P>
+<P>See also SHOW/QRZ. </P>
+<H2><A NAME="ss11.116">11.116</A> <A HREF="usermanual_en.html#toc11.116">show/wwv</A>
+</H2>
+
+<P><CODE><B>show/wwv</B> Show last 10 WWV broadcasts</CODE></P>
+
+
+<H2><A NAME="ss11.117">11.117</A> <A HREF="usermanual_en.html#toc11.117">show/wwv <n></A>
+</H2>
+
+<P><CODE><B>show/wwv <n></B> Show last <n> WWV broadcasts</CODE></P>
+
+<P>Display the most recent WWV information that has been received by the system</P>
+<H2><A NAME="ss11.118">11.118</A> <A HREF="usermanual_en.html#toc11.118">sysop</A>
+</H2>
+
+<P><CODE><B>sysop</B> Regain your privileges if you login remotely</CODE></P>
+
+<P>The system automatically reduces your privilege level to that of a
+normal user if you login in remotely. This command allows you to
+regain your normal privilege level. It uses the normal system: five
+numbers are returned that are indexes into the character array that is
+your assigned password (see SET/PASSWORD). The indexes start from
+zero.</P>
+<P>You are expected to return a string which contains the characters
+required in the correct order. You may intersperse those characters
+with others to obscure your reply for any watchers. For example (and
+these values are for explanation :-):</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ password = 012345678901234567890123456789
+ > sysop
+ 22 10 15 17 3
+</PRE>
+</CODE></BLOCKQUOTE>
+
+you type:-
+<BLOCKQUOTE><CODE>
+<PRE>
+ aa2bbbb0ccc5ddd7xxx3n
+ or 2 0 5 7 3
+ or 20573
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>They will all match. If there is no password you will still be offered
+numbers but nothing will happen when you input a string. Any match is
+case sensitive.</P>
+<H2><A NAME="ss11.119">11.119</A> <A HREF="usermanual_en.html#toc11.119">talk <call> > <node> [<text>]</A>
+</H2>
+
+<P><CODE><B>talk <call> > <node> [<text>]</B> Send a text message to another station via a node</CODE></P>
+
+<P>Send a short message to any other station that is visible on the cluster
+system. You can send it to anyone you can see with a SHOW/CONFIGURATION
+command, they don't have to be connected locally.</P>
+<P>The second form of TALK is used when other cluster nodes are connected
+with restricted information. This usually means that they don't send
+the user information usually associated with logging on and off the cluster.</P>
+<P>If you know that G3JNB is likely to be present on GB7TLH, but you can only
+see GB7TLH in the SH/C list but with no users, then you would use the
+second form of the talk message.</P>
+<P>If you want to have a ragchew with someone you can leave the text message
+out and the system will go into 'Talk' mode. What this means is that a
+short message is sent to the recipient telling them that you are in a
+'Talking' frame of mind and then you just type - everything you send will
+go to the station that you asked for. </P>
+<P>All the usual announcements, spots and so on will still come out on your
+terminal.</P>
+<P>If you want to do something (such as send a spot) you preceed the normal
+command with a '/' character, eg:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ /DX 14001 G1TLH What's a B class licensee doing on 20m CW?
+ /HELP talk
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>To leave talk mode type:</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ /EX
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>If you are in 'Talk' mode, there is an extention to the '/' command which
+allows you to send the output to all the people you are talking to. You do
+with the '//' command. For example:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ //sh/hftable
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>will send the hftable as you have it to all the people you are currently
+talking to.</P>
+<H2><A NAME="ss11.120">11.120</A> <A HREF="usermanual_en.html#toc11.120">talk <call> [<text>]</A>
+</H2>
+
+<P><CODE><B>talk <call> [<text>]</B> Send a text message to another station</CODE></P>
+
+
+<H2><A NAME="ss11.121">11.121</A> <A HREF="usermanual_en.html#toc11.121">type <filearea>/<name></A>
+</H2>
+
+<P><CODE><B>type <filearea>/<name></B> Look at the contents of a file in one of the fileareas</CODE></P>
+
+<P>Type out the contents of a file in a filearea. So, for example, in
+filearea 'bulletins' you want to look at file 'arld051' you would
+enter:-
+<BLOCKQUOTE><CODE>
+<PRE>
+ TYPE bulletins/arld051
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>See also SHOW/FILES to see what fileareas are available and a
+list of content.</P>
+<H2><A NAME="ss11.122">11.122</A> <A HREF="usermanual_en.html#toc11.122">unset/announce</A>
+</H2>
+
+<P><CODE><B>unset/announce</B> Stop announce messages coming out on your terminal</CODE></P>
+
+
+<H2><A NAME="ss11.123">11.123</A> <A HREF="usermanual_en.html#toc11.123">unset/anntalk</A>
+</H2>
+
+<P><CODE><B>unset/anntalk</B> Stop talk like announce messages on your terminal</CODE></P>
+
+<P>The announce system on legacy cluster nodes is used as a talk
+substitute because the network is so poorly connected. If you:</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ unset/anntalk
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>you will suppress several of these announces, you may miss the odd
+useful one as well, but you would probably miss them anyway in the
+welter of useless ones.</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ set/anntalk
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>allows you to see them again. This is the default.</P>
+<H2><A NAME="ss11.124">11.124</A> <A HREF="usermanual_en.html#toc11.124">unset/beep</A>
+</H2>
+
+<P><CODE><B>unset/beep</B> Stop beeps for DX and other messages on your terminal</CODE></P>
+
+
+<H2><A NAME="ss11.125">11.125</A> <A HREF="usermanual_en.html#toc11.125">unset/dx</A>
+</H2>
+
+<P><CODE><B>unset/dx</B> Stop DX messages coming out on your terminal</CODE></P>
+
+
+<H2><A NAME="ss11.126">11.126</A> <A HREF="usermanual_en.html#toc11.126">unset/dxcq</A>
+</H2>
+
+<P><CODE><B>unset/dxcq</B> Stop CQ Zones on the end of DX announcements</CODE></P>
+
+<P>Display both the Spotter's and the Spotted's CQ Zone on the end
+of a DX announcement (there is just enough room). Some user programs
+cannot cope with this. The Spotter's CQ is on the RHS of the
+time, the Spotted's CQ is on the LHS.</P>
+<P>Conflicts with: SET/DXGRID, SET/DXITU, SHOW/USSTATE</P>
+<P>Do a STAT/USER to see which flags you have set if you are confused. </P>
+<H2><A NAME="ss11.127">11.127</A> <A HREF="usermanual_en.html#toc11.127">unset/dxgrid</A>
+</H2>
+
+<P><CODE><B>unset/dxgrid</B> Stop QRA Grid Squares on the end of DX announcements</CODE></P>
+
+<P>A standard feature which is enabled in version 1.43 and above is
+that if the spotter's grid square is known it is output on the end
+of a DX announcement (there is just enough room). Some user programs
+cannot cope with this. You can use this command to reset (or set)
+this feature.</P>
+<P>Conflicts with: SET/DXCQ, SET/DXITU</P>
+<P>Do a STAT/USER to see which flags you have set if you are confused. </P>
+<H2><A NAME="ss11.128">11.128</A> <A HREF="usermanual_en.html#toc11.128">unset/dxitu</A>
+</H2>
+
+<P><CODE><B>unset/dxitu</B> Stop ITU Zones on the end of DX announcements</CODE></P>
+
+<P>Display both the Spotter's and the Spotted's ITU Zone on the end
+of a DX announcement (there is just enough room). Some user programs
+cannot cope with this. The Spotter's ITU is on the RHS of the
+time, the Spotted's ITU is on the LHS.</P>
+<P>Conflicts with: SET/DXGRID, SET/DXCQ, SHOW/USSTATE</P>
+<P>Do a STAT/USER to see which flags you have set if you are confused. </P>
+<H2><A NAME="ss11.129">11.129</A> <A HREF="usermanual_en.html#toc11.129">unset/echo</A>
+</H2>
+
+<P><CODE><B>unset/echo</B> Stop the cluster echoing your input</CODE></P>
+
+<P>If you are connected via a telnet session, different implimentations
+of telnet handle echo differently depending on whether you are
+connected via port 23 or some other port. You can use this command
+to change the setting appropriately. </P>
+<P>The setting is stored in your user profile.</P>
+<P>YOU DO NOT NEED TO USE THIS COMMAND IF YOU ARE CONNECTED VIA AX25.</P>
+<H2><A NAME="ss11.130">11.130</A> <A HREF="usermanual_en.html#toc11.130">unset/email</A>
+</H2>
+
+<P><CODE><B>unset/email</B> Stop personal msgs being forwarded by email</CODE></P>
+
+<P>If any personal messages come in for your callsign then you can use
+these commands to control whether they are forwarded onto your email
+address. To enable the forwarding do something like:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ SET/EMAIL mike.tubby@somewhere.com
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>You can have more than one email address (each one separated by a space).
+Emails are forwarded to all the email addresses you specify.</P>
+<P>You can disable forwarding by:-</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ UNSET/EMAIL
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+
+<H2><A NAME="ss11.131">11.131</A> <A HREF="usermanual_en.html#toc11.131">unset/here</A>
+</H2>
+
+<P><CODE><B>unset/here</B> Tell the system you are absent from your terminal</CODE></P>
+
+
+<H2><A NAME="ss11.132">11.132</A> <A HREF="usermanual_en.html#toc11.132">unset/logininfo</A>
+</H2>
+
+<P><CODE><B>unset/logininfo</B> Inform when a station logs out locally</CODE></P>
+
+
+<H2><A NAME="ss11.133">11.133</A> <A HREF="usermanual_en.html#toc11.133">unset/privilege</A>
+</H2>
+
+<P><CODE><B>unset/privilege</B> Remove any privilege for this session</CODE></P>
+
+<P>You can use this command to 'protect' this session from unauthorised
+use. If you want to get your normal privilege back you will need to
+either logout and login again (if you are on a console) or use the
+SYSOP command.</P>
+<H2><A NAME="ss11.134">11.134</A> <A HREF="usermanual_en.html#toc11.134">unset/prompt</A>
+</H2>
+
+<P><CODE><B>unset/prompt</B> Set your prompt back to default</CODE></P>
+
+<P>This command will set your user prompt to exactly the string that you
+say. The point of this command to enable a user to interface to programs
+that are looking for a specific prompt (or else you just want a different
+fixed prompt).</P>
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+ SET/PROMPT clx >
+</PRE>
+</CODE></BLOCKQUOTE>
+</P>
+<P>UNSET/PROMPT will undo the SET/PROMPT command and set you prompt back to
+normal.</P>
+<H2><A NAME="ss11.135">11.135</A> <A HREF="usermanual_en.html#toc11.135">unset/talk</A>
+</H2>
+
+<P><CODE><B>unset/talk</B> Stop TALK messages coming out on your terminal</CODE></P>
+
+
+<H2><A NAME="ss11.136">11.136</A> <A HREF="usermanual_en.html#toc11.136">unset/usstate</A>
+</H2>
+
+<P><CODE><B>unset/usstate</B> Stop US State info on the end of DX announcements</CODE></P>
+
+<P>If the spotter's or spotted's US State is known it is output on the
+end of a DX announcement (there is just enough room). </P>
+<P>A spotter's state will appear on the RHS of the time (like
+SET/DXGRID) and the spotted's State will appear on the LHS of the
+time field. Any information found will override any locator
+information from SET/DXGRID.</P>
+<P>Some user programs cannot cope with this. You can use this command
+to reset (or set) this feature.</P>
+<P>Conflicts with: SET/DXCQ, SET/DXITU</P>
+<P>Do a STAT/USER to see which flags you have set if you are confused. </P>
+<H2><A NAME="ss11.137">11.137</A> <A HREF="usermanual_en.html#toc11.137">unset/wcy</A>
+</H2>
+
+<P><CODE><B>unset/wcy</B> Stop WCY messages coming out on your terminal</CODE></P>
+
+
+<H2><A NAME="ss11.138">11.138</A> <A HREF="usermanual_en.html#toc11.138">unset/wwv</A>
+</H2>
+
+<P><CODE><B>unset/wwv</B> Stop WWV messages coming out on your terminal</CODE></P>
+
+
+<H2><A NAME="ss11.139">11.139</A> <A HREF="usermanual_en.html#toc11.139">unset/wx</A>
+</H2>
+
+<P><CODE><B>unset/wx</B> Stop WX messages coming out on your terminal</CODE></P>
+
+
+<H2><A NAME="ss11.140">11.140</A> <A HREF="usermanual_en.html#toc11.140">who</A>
+</H2>
+
+<P><CODE><B>who</B> Show who is physically connected</CODE></P>
+
+<P>This is a quick listing that shows which callsigns are connected and
+what sort of connection they have</P>
+<H2><A NAME="ss11.141">11.141</A> <A HREF="usermanual_en.html#toc11.141">wx <text></A>
+</H2>
+
+<P><CODE><B>wx <text></B> Send a weather message to local users</CODE></P>
+
+
+<H2><A NAME="ss11.142">11.142</A> <A HREF="usermanual_en.html#toc11.142">wx full <text></A>
+</H2>
+
+<P><CODE><B>wx full <text></B> Send a weather message to all cluster users</CODE></P>
+
+