-From version 1.47 there is a new (more efficient) way of doing this
-(see next section) but, if you prefer, the method of doing it described
-here will continue to work just fine.
-
-<P>
-Allowing telnet connections is quite simple. Firstly you need to add a line
-in /etc/services to allow connections to a port number, like this ....
-
-<tscreen><verb>
-spdlogin 8000/tcp # spider anonymous login port
-</verb></tscreen>
-
-Then add a line in /etc/inetd.conf like this ....
-
-<tscreen><verb>
-spdlogin stream tcp nowait root /usr/sbin/tcpd /spider/src/client login telnet
-</verb></tscreen>
-
-<P>
-Once this is done, you need to restart inetd like this ....
-
-<tscreen><verb>
-killall -HUP inetd
-</verb></tscreen>
-
-
-<P>Now login as <em>sysop</em> and cd spider/src. You can test that spider
-is accepting telnet logins by issuing the following command ....
-
-<tscreen><verb>
-./client login telnet
-</verb></tscreen>
-
-You should get a login prompt and on issuing a callsign, you will be given
-access to the cluster. Note, you will not get a password login. There seems
-no good reason for a password prompt to be given so it is not asked for.
-
-<P>
-Assuming all is well, then try a telnet from your linux console ....
-
-<tscreen><verb>
-telnet localhost 8000
-</verb></tscreen>
-
-<P>
-You should now get the login prompt and be able to login as before.
-
-<sect1>Setting up telnet connects (from 1.47 onwards)
-
-<P>
-From version 1.47 you can choose to allow the perl cluster.pl program to
-allow connections directly (i.e. not via the <tt>/spider/src/client</tt>
-interface program). If you are using Windows then this is the only method
-available of allowing incoming telnet connections.
-
-<P>
-To do this you need first to remove any line that you may previously have set
-up in /etc/inetd.conf. Remember to:-
-
-<tscreen><verb>
-killall -HUP inetd
-</verb></tscreen>
-
-<P>
-to make the change happen...
-
-<P>
-Having done that, you need to copy the file
-<em>/spider/perl/Listeners.pm</em> to <em>/spider/local</em> and
-then edit it. You will need to uncomment the line containing &dquot;0.0.0.0&dquot;
-and select the correct port to listen on. So that it looks like this:-
-
-<tscreen><verb>
-@listen = (
- ["0.0.0.0", 8000],
-);
-</verb></tscreen>
-
-<P>
-As standard, the listener will listen on all interfaces simultaneously.
-If you require more control than this, you can specify each interface
-individually:-
-
-<tscreen><verb>
-@listen = (
- ["gb7baa.dxcluster.net", 8000],
- ["44.131.16.2", 6300],
-);
-</verb></tscreen>
-
-<P>
-This will only be successful if the IP addresses on each interface are static.
-If you are using some kind of dynamic IP addressing then the 'default' method
-is the only one that will work.
-
-<P>
-Restart the cluster.pl program to enable the listener.
-
-<P>
-One important difference with the internal listener is that no echoing
-is done by the cluster program. Users will need to set 'local-echo' on in
-their telnet clients if it isn't set automatically (as per the standards).
-Needless to say this will probably only apply to Windows users.
-
-<sect1>Setting up for AGW Engine (1.47 onwards)
-
-<P>
-AGW Engine is a Windows based ax25 stack. You can connect to an AGW engine
-from Linux as well as Windows based machines.
-
-<P>
-In order to enable access to an AGW Engine you need to copy
-<em>/spider/perl/AGWConnect.pm</em> to <em>/spider/local</em> and edit it.
-Specifically you must:-
-
-<itemize>
-<item> set <tt>$enable</tt> to 1.
-<item> set <tt>$login</tt> and <tt>$passwd</tt> to the values set up in your AGW installation.
-If you haven't set any there, then you should not touch these values.
-<item> You can connect to a remote AGW engine (ie on some other machine) by changing <tt>$addr</tt>
-and <tt>$port</tt> appropriately.
-<item> Restart the cluster.pl program
-</itemize>
-
-
-<sect1>Setting up node connects
-
-<P>
-In order to allow cluster node connections, spider needs to know that the
-connecting callsign is a cluster node. This is the case whether the connect
-is incoming or outgoing. In spider this is a simple task and can be done in
-runtime.
-
-<P>
-Later versions of Spider can distinguish different software and treat them
-differently. For example, the WCY beacon cannot be handles by AK1A type
-nodes as AK1A does not know what to do with PC73. There are 4 different
-types of node at present and although they may not have any major
-differences at the moment, it allows for compatibility. The 4 types are ...
-
-<tscreen><verb>
-set/node (AK1A type)
-set/spider
-set/dxnet
-set/clx
-</verb></tscreen>
-
-<P>
-For now, we will assume that the cluster we are going to connect to is an
-AK1A type node.
-
-<P>
-Start up the cluster as you did before and login as the sysop with client.
-The cluster node I am wanting to make a connection to is GB7BAA but you would
-obviously use whatever callsign you required. At the prompt type ...
-
-<tscreen><verb>
-set/node gb7baa
-</verb></tscreen>
-
-<P>
-The case does not matter as long as you have a version of DXSpider later than
-1.33. Earlier versions required the callsign to be in upper case.
-
-<P>
-That is now set, it is as simple as that. To prove it, login on yet another
-console as sysop, cd to spider/src and issue the command ...
-
-<tscreen><verb>
-./client gb7baa (using the callsign you set as a node)
-</verb></tscreen>
-
-<P>
-You should get an initialisation string from DXSpider like this ...
-
-<tscreen><verb>
-./client gb7baa
-PC38^GB7MBC^~
-</verb></tscreen>
-
-If the callsign you just set up as a cluster node is for an incoming connect,
-this is all that needs to be done. If the connection is to be outgoing then
-a connection script needs to be written.
-
-<P>
-Sometimes you make a mistake... Honest, it does happen. If you want to make a node
-back to being a normal user, regardless
-of what type it is, do:
-
-<tscreen><verb>
-unset/node gb7baa
-</verb></tscreen>
-
-<sect1>Connection scripts
-
-<P>
-Because DXSpider operates under Linux, connections can be made using just about
-any protocol; AX25, NETRom, tcp/ip, ROSE etc are all possible examples.
-Connect scripts live in the /spider/connect directory and are simple ascii files.
-Writing a script for connections is therefore relatively simple.
-
-<P>
-The connect scripts consist of lines which start with the following keywords
-or symbols:-
-
-<descrip>
-
-<tag/#/All lines starting with a <tt>#</tt> are ignored, as are completely
- blank lines.
-
-<tag/timeout/<tt>timeout</tt> followed by a number is the number of seconds to wait for a
- command to complete. If there is no timeout specified in the script
- then the default is 60 seconds.
-
-<tag/abort/ <tt>abort</tt> is a regular expression containing one or more strings to look
- for to abort a connection. This is a perl regular expression and is
- executed ignoring case.
-
-<tag/connect/<tt>connect</tt> followed by ax25, agw (for Windows users) or telnet and some type dependent
- information. In the case of a telnet connection, there can be up to
- two parameters.
- The first is the ip address or hostname of the computer you wish to
- connect to and the second is the port number you want to use (this
- can be left out if it is a normal telnet session).
- In the case of an ax25 session then this would normally be a call to
- ax25_call or netrom_call as in the example above. It is your
- responsibility to get your node and other ax25 parameters to work
- before going down this route!
-
-<tag/'/<tt>'</tt> is the delimiting character for a word or phrase of an expect/send
- line in a chat type script. The words/phrases normally come in pairs,
- either can be empty. Each line reads input from the connection until
- it sees the string (or perl regular expression) contained in the
- left hand string. If the left hand string is empty then it doesn't
- read or wait for anything. The comparison is done ignoring case.
- When the left hand string has found what it is looking for (if it is)
- then the right hand string is sent to the connection.
- This process is repeated for every line of chat script.
-
-<tag/client/<tt>client</tt> starts the connection, put the arguments you would want here
- if you were starting the client program manually. You only need this
- if the script has a different name to the callsign you are trying to
- connect to (i.e. you have a script called other which actually
- connects to GB7DJK-1 [instead of a script called gb7djk-1]).
-</descrip>
-
-
-There are many possible ways to configure the script but here are three examples,
-one for a NETRom/AX25 connect, one for AGW engines and one for tcp/ip.
-
-<tscreen><verb>
-timeout 60
-abort (Busy|Sorry|Fail)
-# don't forget to chmod 4775 netrom_call!
-connect ax25 /usr/sbin/netrom_call bbs gb7djk g1tlh
-'Connect' ''
-'Connect' 'c np7'
-'Connect' 'c gb7dxm'
-# you can leave this out if you call the script 'gb7dxm'
-client gb7dxm ax25
-</verb></tscreen>
-
-<P>
-
-<tscreen><verb>
-timeout 60
-abort (Busy|Sorry|Fail)
-# this does exactly the same as the previous example
-# the '1' is the AGW port number to connect thru for g1tlh
-connect agw 1 g1tlh
-'Connect' ''
-'Connect' 'c np7'
-'Connect' 'c gb7dxm'
-# you can leave this out if you call the script 'gb7dxm'
-client gb7dxm ax25
-</verb></tscreen>
-
-<P>
-
-<tscreen><verb>
-timeout 15
-connect telnet dirkl.tobit.co.uk
-'login' 'gb7djk'
-'word' 'gb7djk'
-# tell GB7DJK-1 that it is connected to GB7DJK
-# you can leave this out if you call this script 'gb7djk'
-client gb7djk telnet
-</verb></tscreen>
-
-<P>
-Both these examples assume that everything is set up properly at the other end.
-You will find other examples in the /spider/examples directory.
-
-<sect1>Starting the connection
-
-<P>
-You start the connection, from within a sysop enabled cluster login, by typing
-in the word <em>connect</em> followed by a script name like this ....
-
-<tscreen><verb>
-G0VGS de GB7MBC 13-Dec-1998 2041Z >connect gb7djk-1
-connection to GB7DJK-1 started
-G0VGS de GB7MBC 13-Dec-1998 2043Z >
-</verb></tscreen>
-
-This will start a connection using the script called <em>gb7djk-1</em>. You can
-follow the connection by watching the term or console from where you started
-<em>cluster.pl</em>. From version 1.47 onwards, you will need to <tt>set/debug connect</tt> first.
-You should see something like this ...
-
-<tscreen><verb>
-<- D G1TLH connect gb7djk-1
--> D G1TLH connection to GB7DJK-1 started
--> D G1TLH G1TLH de GB7DJK 13-Dec-1998 2046Z >
-timeout set to 15
-CONNECT sort: telnet command: dirkl.tobit.co.uk
-CHAT "login" -> "gb7djk"
-received "
-Red Hat Linux release 5.1 (Manhattan)
-Kernel 2.0.35 on an i586
-"
-received "login: "
-sent "gb7djk"
-CHAT "word" -> "gb7djk"
-received "gb7djk"
-received "Password: "
-sent "gb7djk"
-Connected to GB7DJK-1, starting normal protocol
-<- O GB7DJK-1 telnet
--> B GB7DJK-1 0
-GB7DJK-1 channel func state 0 -> init
-<- D GB7DJK-1
-<- D GB7DJK-1 Last login: Sun Dec 13 17:59:56 from dirk1
-<- D GB7DJK-1 PC38^GB7DJK-1^~
-<- D GB7DJK-1 PC18^ 1 nodes, 0 local / 1 total users Max users 0 Uptime
-0 00:00^5447^~
- etc
-
-</verb></tscreen>
-
-<P>
-With later versions of Spider there is a set/login command for users. This
-tells them when a user or node logs in or out. If you do not add a line to
-your scripts after the final line (or before the client line which should always
-be last if needed) then the login/logout information will be sent to users
-<it>before</it> the login actually completes. This means if a node is
-unreachable, it will continue sending logins and logouts to users even though it
-is not actually connecting. To avoid this use the following line ...
-
-<tscreen><verb>
-'connect' ''
-</verb></tscreen>
-
-<P>
-In a script, this might look like ...
-
-<tscreen><verb>
-timeout 35
-abort (Busy|Sorry|Fail)
-connect telnet mary 3000
-'ogin:' 'gb7mbc'
-'>' 'telnet 44.131.93.96 7305'
-'connect' ''
-</verb></tscreen>
-
-<sect1>Telnet echo
-
-<P>
-Cluster links in particular suffer greatly from the presence of telnet echo.
-This is caused by the telnet negotiation itself and can create at worst severe
-loops. At best it creates unnecessary bandwidth and large logfiles! There are
-things that can be done to limit this problem but will not always work dependent
-on the route taken to connect.
-
-<P>
-Telnet echo itself should only be a problem if the connection is being made to
-the telnet port (23). This port uses special rules that include echo negotiation.
-If the connection is to a different port, such as 7300, this negotiation does
-not happen and therefore no echo should be present.
-
-<P>
-Sometimes it is not possible to make a direct connection to another node and this
-can cause problems. There is a way of trying to suppress the telnet echo but
-this will not always work, unfortunately it is difficult to be more specific.
-Here is an example of what I mean ...
-
-<tscreen><verb>
-timeout 35
-abort (Busy|Sorry|Fail)
-connect telnet mary.lancs.ac.uk
-'ogin:' 'gb7mbc'
-'word:' 'mypasswd'
-'\$' 'stty -echo raw'
-'\$' 'telnet 44.131.93.96'
-'connect' ''
-</verb></tscreen>
-
-So, the first connection is made by Spider. This is fine as Spider uses the
-Net_Telnet script from within perl. This actually uses TCP rather than TELNET
-so no negotiation will be done on the first connection. Once connected to
-mary.lancs.ac.uk, the command is sent to suppress echo. Now a telnet is made
-to a cluster node that is accepting connections on port 23. The problem with
-this link is that the negotiation is made by the remote machine, therefore you
-have no control over it. The chances are that this link will create echo and
-there will be no way you can stop it.
-
-
-<sect>Automating things
-
-<P>
-Ok, you should now have DXSpider running nicely and allowing connects by cluster
-nodes or users. However, it has to be shutdown and restarted manually and if
-connection scripts fail they have to be started again manually too, not much use
-if you are not at the console! So, in this section we will automate both.
-Firstly starting the cluster.
-
-<sect1>Autostarting the cluster
-
-<P>
-This is not only a way to start the cluster automatically, it also works as a
-watchdog, checking the sanity of DXSpider and respawning it should it crash for
-any reason. Before doing the following, shutdown the cluster as you did earlier.
-
-<P>
-Login as root and bring up the /etc/inittab file in your favourite editor. Add
-the following lines to the file near the end ...
-
-<tscreen><verb>
-##Start DXSpider on bootup and respawn it should it crash
-DX:3:respawn:/bin/su -c "/usr/bin/perl -w /spider/perl/cluster.pl" sysop >/dev/tty7
-</verb></tscreen>
-
-<P>
-This line works fine for RedHat distributions. It is also fine for SuSE up to
-7.0. From Suse 7.1 you need to add runlevels 2 and 5 like this ...
-
-<tscreen><verb>
-DX:235:respawn:/bin/su -c "/usr/bin/perl -w /spider/perl/cluster.pl" sysop >/dev/tty7
-</verb></tscreen>
-
-
-The line required for Slackware distributions is slightly different. My thanks to
-Aurelio, PA3EZL for this information.
-
-<tscreen><verb>
-DX:23:respawn:/bin/su - sysop -c "/usr/bin/perl -w /spider/perl/cluster.pl" >/dev/tty7
-</verb></tscreen>
-
-<P>
-This will automatically start DXSpider on tty7 (ALT-F7) on bootup and restart
-it should it crash for any reason.
-
-<P>
-As root type the command <em>telinit q</em>. DXSpider should start up
-immediately. You will see the output on tty7 and if you login as <em>sysop</em>
-you should find everything running nicely.
-
-<P>
-So far so good, now to automate script connections...
-
-<sect1>The crontab file
-
-<P>
-Login as <em>sysop</em> and create a file in /spider/local_cmd called crontab.
-Edit it with your favourite editor and add a line like this (I have included
-a comment)
-
-<tscreen><verb>
-# check every 10 minutes to see if gb7xxx is connected and if not
-# start a connect job going
-
-0,10,20,30,40,50 * * * * start_connect('gb7xxx') if unless connected('gb7xxx')
-</verb></tscreen>
-
-<P>
-The callsign involved will be the callsign of the cluster node you are
-going to connect to. This will now check every 10 minutes to see if
-gb7xxx is connected, if it is then nothing will be done. If it is not,
-then a connect attempt will be started.
-
-<P>
-There are probably lots of other things you could use this crontab file for.
-If you want to know more about it, look at the
-<htmlurl url="http://www.dxcluster.org/cron.html" name="DXSpider"> website
-at the cron page where it is explained more fully.
-
-<sect>Hop control
-
-<P>
-Starting with version 1.13 there is simple hop control available on a per
-node basis. Also it is possible to isolate a network completely so that you
-get all the benefits of being on that network, but can't pass on information
-from it to any other networks you may be connected to (or vice versa).
-
-<sect1>Basic hop control
-
-<P>
-In /spider/data you will find a file called hop_table.pl. This is the file
-that controls your hop count settings. It has a set of default hops on the
-various PC frames and also a set for each node you want to alter the hops for.
-You may be happy with the default settings of course, but this powerful tool
-can help to protect and improve the network. The file will look something
-like this ...
-
-<tscreen><verb>
-#
-# hop table construction
-#
-
-package DXProt;
-
-# default hopcount to use
-$def_hopcount = 5;
-
-# some variable hop counts based on message type
-%hopcount =
-(
- 11 => 10,
- 16 => 10,
- 17 => 10,
- 19 => 10,
- 21 => 10,
-);