Create an 'accept this announce' line for a filter.
An accept filter line means that if the announce matches this filter it is
-passed onto the user. See HELP FILTERS for more info. Please read this
+passed onto the user. See HELP FILTERING for more info. Please read this
to understand how filters work - it will save a lot of grief later on.
You can use any of the following things in this line:-
accept/ann input node_default by G,M,2
accept/ann user_default by G,M,2
+=== 8^ACCEPT/ROUTE <call> [0-9] <pattern>^Set an 'accept' filter line for routing
+Create an 'accept this routing PC Protocol' line for a filter.
+
+An accept filter line means that if a PC16/17/19/21/24/41/50 matches this filter
+it is passed thru that interface. See HELP FILTERING for more info. Please read this
+to understand how filters work - it will save a lot of grief later on.
+
+You can use any of the following things in this line:-
+
+ call <prefixes> the callsign of the thingy
+ call_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ call_itu <numbers>
+ call_zone <numbers>
+ origin <prefixes> really the interface it came in on
+ origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <numbers>
+ origin_zone <numbers>
+
+some examples:-
+
+ acc/route gb7djk call_dxcc 61,38 (send only UK+EIRE nodes)
+ acc/route gb7djk call gb7djk (equiv to SET/ISOLATE)
+
+You can use the tag 'all' to accept everything eg:
+
+ acc/route all
+
+
=== 0^ACCEPT/SPOTS [0-9] <pattern>^Set an 'accept' filter line for spots
Create an 'accept this spot' line for a filter.
An accept filter line means that if the spot matches this filter it is
-passed onto the user. See HELP FILTERS for more info. Please read this
+passed onto the user. See HELP FILTERING for more info. Please read this
to understand how filters work - it will save a lot of grief later on.
You can use any of the following things in this line:-
but this probably for advanced users...
+
=== 8^ACCEPT/SPOTS <call> [input] [0-9] <pattern>^Spot filter sysop version
This version allows a sysop to set a filter for a callsign as well as the
default for nodes and users eg:-
perl -d cluster.pl
It will interrupt the cluster just after the debug command has finished.
+
=== 0^DIRECTORY^List messages
=== 0^DIRECTORY ALL^List all messages
=== 0^DIRECTORY OWN^List your own messages
Create an 'reject this announce' line for a filter.
A reject filter line means that if the announce matches this filter it is
-passed onto the user. See HELP FILTERS for more info. Please read this
+passed onto the user. See HELP FILTERING for more info. Please read this
to understand how filters work - it will save a lot of grief later on.
You can use any of the following things in this line:-
Create a 'reject this spot' line for a filter.
A reject filter line means that if the spot matches this filter it is
-dumped (not passed on). See HELP FILTERS for more info. Please read this
+dumped (not passed on). See HELP FILTERING for more info. Please read this
to understand how filters work - it will save a lot of grief later on.
You can use any of the following things in this line:-
but this probably for advanced users...
+=== 8^REJECT/ROUTE <call> [0-9] <pattern>^Set an 'reject' filter line for routing
+Create an 'reject this routing PC Protocol' line for a filter.
+
+An reject filter line means that if a PC16/17/19/21/24/41/50 matches this filter
+it is NOT passed thru that interface. See HELP FILTERING for more info. Please
+read this to understand how filters work - it will save a lot of grief later on.
+
+You can use any of the following things in this line:-
+
+ call <prefixes> the callsign of the thingy
+ call_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ call_itu <numbers>
+ call_zone <numbers>
+ origin <prefixes> really the interface it came in on
+ origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <numbers>
+ origin_zone <numbers>
+
+some examples:-
+
+ rej/route gb7djk call_dxcc 61,38 (everything except UK+EIRE nodes)
+
+You can use the tag 'all' to reject everything eg:
+
+ rej/route all (equiv to [very] restricted mode)
+
=== 8^REJECT/SPOTS <call> [input] [0-9] <pattern>^Spot filter sysop version
This version allows a sysop to set a filter for a callsign as well as the
default for nodes and users eg:-
=== 5^SET/ARCLUSTER <call> [<call>..]^Make the callsign an AR-Cluster node
-=== 8^SET/BADDX <call>..^Stop spots for this callsign being propagated
-=== 8^UNSET/BADDX <call>..^Allow spots for this callsign again
-Setting a callsign as a 'baddx' will prevent spots of this callsign
-going any further. They will not be displayed and they will not be
-sent onto other nodes.
+=== 8^SET/BADDX <call>..^Stop words we do not wish to see in the callsign field
+of a dx spot being propagated
+=== 8^UNSET/BADDX <call>..^Allow a word to be seen again in a DX spot
+Setting a word as 'baddx' will prevent spots with that word in the
+callsign field of a DX spot from going any further. They will not be
+displayed and they will not be sent onto other nodes.
-The call must be a full eg:-
+The word must be wriiten in full, no wild cards are allowed eg:-
- set/baddx FORSALE VIDEO FR0G
+ set/baddx FORSALE VIDEO FR0G
- unset/badnode VIDEO
+To allow a word again, use the following command ...
-will allow spots to that callsign again.
+ unset/baddx VIDEO
=== 8^SET/BADNODE <call>..^Stop spots from this node being propagated
=== 8^UNSET/BADNODE <call>..^Allow spots from this node again
going any further. They will not be displayed and they will not be
sent onto other nodes.
-The call must be a full eg:-
+The call must be written in full, no wild cards are allowed eg:-
set/badspotter VE2STN
will stop anything from VE2STN. If you want SSIDs as well then you must
enter them specifically.
- unset/badnode VE2STN
+ unset/badspotter VE2STN
will allow spots from him again.
-Use with extreme care. This command may well be superceeded by FILTERing.
+Use with extreme care. This command may well be superceded by FILTERing.
=== 0^SET/BEEP^Add a beep to DX and other messages on your terminal
=== 0^UNSET/BEEP^Stop beeps for DX and other messages on your terminal
+=== 5^SET/BBS <call> [<call>..]^Make the callsign a BBS
+
=== 5^SET/CLX <call> [<call>..]^Make the callsign an CLX node
=== 9^SET/DEBUG <name>^Add a debug level to the debug set
=== 9^UNSET/DEBUG <name>^Remove a debug level from the debug set
+You can choose to log several different levels. The levels are
+
+chan
+state
+msg
+cron
+connect
+
+You can show what levels you are logging with SHOW/DEBUG
=== 0^SET/DX^Allow DX messages to come out on your terminal
=== 0^UNSET/DX^Stop DX messages coming out on your terminal
If you are a sysop and you come in as a normal user on a remote connection
your privilege will automatically be set to 0.
+=== 0^UNSET/PRIVILEGE^Remove any privilege for this session
+You can use this command to 'protect' this session from unauthorised
+use. If you want to get your normal privilege back you will need to
+either logout and login again (if you are on a console) or use the
+SYSOP command.
+
=== 9^SET/PASSWORD <callsign> <string>^Set a users password
The password for a user can only be set by a full sysop. The string
can contain any characters but any spaces are removed (you can type in
Display all the bad spotter's callsigns in the system, see SET/BADSPOTTER
for more information.
+=== 0^SHOW/CONFIGURATION [<node>]^Show all the nodes and users visible
+This command allows you to see all the users that can be seen
+and the nodes to which they are connected.
+
+This command is normally abbreviated to: sh/c
+
+BE WARNED: the list that is returned can be VERY long
+
+=== 0^SHOW/CONFIGURATION/NODE^Show all the nodes connected locally
+Show all the nodes connected to this node.
+
+=== 1^SHOW/CONNECT^Show all the active connections
+This command shows information on all the active connections known to
+the node. This command gives slightly more information than WHO.
+
=== 0^SHOW/DATE [<prefix>|<callsign>]^Show the local time
This is very nearly the same as SHOW/TIME, the only difference the format
of the date string if no arguments are given.
then it will show UTC and UTC + the local offset (not including DST) at
the prefixes or callsigns that you specify.
+=== 9^SHOW/DEBUG^Show what levels of debug information you are logging
+
=== 0^SHOW/DX^Interrogate the spot database
If you just type SHOW/DX you will get the last so many spots
(sysop configurable, but usually 10).
=== 9^SHOW/LOCKOUT^Show the list of locked out or excluded callsigns
+=== 8^SHOW/LOG [<callsign>]^Show excerpts from the system log
+This command outputs a short section of the system log. On its own
+it will output a general logfile. With the optional callsign it will
+show output from the log associated with that callsign.
+
=== 0^SHOW/MOON [<prefix>|<callsign>]^Show Moon rise and set times
Show the Moon rise and set times for a (list of) prefixes or callsigns,
together with the azimuth and elevation of the sun currently at those
SH/SAT AO-10
SH/SAT FENGYUN1 12 2
+=== 6^SHOW/STATION ALL [<regex>]^Show list of users in the system
+=== 0^SHOW/STATION [<callsign> ..]^Show information about a callsign
+Show the information known about a callsign and whether (and where)
+that callsign is connected to the cluster.
+
+ SH/ST G1TLH
+
+If no callsign is given then show the information for yourself.
+
=== 0^SHOW/SUN [<prefix>|<callsign>]^Show sun rise and set times
Show the sun rise and set times for a (list of) prefixes or callsigns,
together with the azimuth and elevation of the sun currently at those
Only the fields that are defined (in perl term) will be displayed.
-=== 5^STAT/MSG <msgno>^Show the status of a message
+=== 1^STAT/MSG^Show the status of the message system
+=== 1^STAT/MSG <msgno>^Show the status of a message
This command shows the internal status of a message and includes information
such as to whom it has been forwarded, its size, origin etc etc.
+If no message number is given then the status of the message system is
+displayed.
+
+=== 5^STAT/ROUTE_NODE <callsign>^Show the data in a Route::Node object
+
+=== 5^STAT/ROUTE_USER <callsign>^Show the data in a Route::User object
+
=== 5^STAT/USER [<callsign>]^Show the full status of a user
Shows the full contents of a user record including all the secret flags
and stuff.