<HTML>
<HEAD>
<META NAME="GENERATOR" CONTENT="SGML-Tools 1.0.9">
- <TITLE>The DXSpider Installation and Administration Manual : CVS</TITLE>
+ <TITLE>The DXSpider Installation and Administration Manual : Filtering (New Style v1.45 and later)</TITLE>
<LINK HREF="adminmanual-8.html" REL=next>
<LINK HREF="adminmanual-6.html" REL=previous>
<LINK HREF="adminmanual.html#toc7" REL=contents>
<A HREF="adminmanual-6.html">Previous</A>
<A HREF="adminmanual.html#toc7">Contents</A>
<HR>
-<H2><A NAME="s7">7. CVS</A></H2>
+<H2><A NAME="s7">7. Filtering (New Style v1.45 and later)</A></H2>
-<P>CVS stands for "Concurrent Versions System" and the CVS for DXSpider is held
-at
-<A HREF="http://www.sourceforge.net">Sourceforge</A>. This means
-that it is possible to update your DXSpider installation to the latest
-sources by using a few simple commands.
+<H2><A NAME="ss7.1">7.1 General filter rules</A>
+</H2>
+
+<P>Upto v1.44 it was not possible for the user to set their own filters. From
+v1.45 though that has all changed. It is now possible to set filters for just
+about anything you wish. If you have just updated from an older version of
+DXSpider you will need to update your new filters. You do not need to do
+anything with your old filters, they will be renamed as you update.
<P>
-<P>THIS IS NOT FOR THE FAINT HEARTED!!! ONLY DO THIS IF YOU HAVE A TEST
-INSTALLATION OR ARE WILLING TO HAVE YOUR CLUSTER CRASH ON YOU!!!
-THIS MUST BE CONSIDERED AT LEAST BETA TESTING AND MAYBE EVEN ALPHA!!
-YOU HAVE BEEN WARNED!!!
+<P>There are 3 basic commands involved in setting and manipulating filters. These
+are <EM>accept</EM>, <EM>reject</EM> and <EM>clear</EM>. First we will look
+generally at filtering. There are a number of things you can filter in the
+DXSpider system. They all use the same general mechanism.
<P>
-<P>DID I MENTION..... ONLY DO THIS IF YOU ARE WILLING TO ACCEPT THE
-CONSEQUENCES!!!
+<P>In general terms you can create a 'reject' or an 'accept' filter which can have
+up to 10 lines in it. You do this using, for example ...
<P>
-<P>I am of course assuming that you have a machine with both DXSpider and
-Internet access running.
+<BLOCKQUOTE><CODE>
+<PRE>
+
+accept/spots .....
+reject/spots .....
+</PRE>
+</CODE></BLOCKQUOTE>
+<P>where ..... are the specific commands for that type of filter. There are filters
+for spots, wwv, announce, wcy and (for sysops) connects. See each different
+accept or reject command reference for more details.
+<P>There is also a command to clear out one or more lines in a filter. They are ...
<P>
-<P>BEFORE YOU EVEN CONSIDER STARTING WITH THIS MAKE A BACKUP OF YOUR
-ENTIRE SPIDER TREE!!
+<BLOCKQUOTE><CODE>
+<PRE>
+clear/spots 1
+clear/spots all
+</PRE>
+</CODE></BLOCKQUOTE>
+<P>There is clear/xxxx command for each type of filter.
<P>
-<P>Assuming you are connected to the Internet, you need to login to the
-CVS repository and then update your Spider source. There are several
-steps which are listed below ...
+<P>and you can check that your filters have worked by the command ...
<P>
-<P>First login as the user <EM>sysop</EM>. Next you need to connect to the CVS
-repository. You do this with the command below ...
+<BLOCKQUOTE><CODE>
+<PRE>
+
+show/filter
+</PRE>
+</CODE></BLOCKQUOTE>
+<P>
+<P>For now we are going to use spots for the examples, but you can apply the same
+principles to all types of filter.
<P>
+<H2><A NAME="ss7.2">7.2 Types of filter</A>
+</H2>
+
+<P>There are two main types of filter, <EM>accept</EM> or <EM>reject</EM>. You
+can use either to achieve the result you want dependent on your own preference
+and which is more simple to do. It is pointless writing 8 lines of reject
+filters when 1 accept filter would do the same thing! Each filter has 10
+lines (of any length) which are tried in order. If a line matches then the
+action you have specified is taken (ie reject means ignore it and accept
+means take it)
+<P>
+<P>If you specify reject filters, then any lines that arrive that match the filter
+will be dumped but all else will be accepted. If you use an accept filter,
+then ONLY the lines in the filter will be accepted and all else will be dumped.
+For example if you have a single line <EM>accept</EM> filter ...
+<P>
+<BLOCKQUOTE><CODE>
<PRE>
-cvs -d:pserver:anonymous@cvs.DXSpider.sourceforge.net:/cvsroot/DXSpider login
+accept/spots on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
</PRE>
-<P>You will get a password prompt. Simply hit return here and your machine should
-return to a normal linux prompt.
+</CODE></BLOCKQUOTE>
+<P>then you will <EM>ONLY</EM> get VHF spots <EM>from</EM> or <EM>to</EM> CQ zones
+14, 15 and 16.
<P>
-<P>What happens next depends on whether you have an existing installation that
-you want to update with the latest and greatest or whether you just want
-to see what is there and/or run it on a new machine for testing.
-Either way you will want to change directory to a new place, if you want to
-update an existing installation then I suggest /tmp, otherwise choose a
-suitable place according to the normal installation instructions.
+<P>If you set a reject filter like this ...
<P>
-<P>The next step will create a brand new 'spider' directory in your current
-directory.
+<BLOCKQUOTE><CODE>
+<PRE>
+reject/spots on hf/cw
+</PRE>
+</CODE></BLOCKQUOTE>
+<P>Then you will get everything <EM>EXCEPT</EM> HF CW spots. You could make this
+single filter even more flexible. For example, if you are interested in IOTA
+and will work it even on CW even though normally you are not interested in
+CW, then you could say ...
<P>
+<BLOCKQUOTE><CODE>
<PRE>
-cvs -z3 -d:pserver:anonymous@cvs.DXSpider.sourceforge.net:/cvsroot/DXSpider co spider
+reject/spots on hf/cw and not info iota
</PRE>
-<P>This command is all on one line.
+</CODE></BLOCKQUOTE>
+<P>But in that case you might only be interested in iota and say:-
<P>
-<P>Hopefully your screen should show you downloading files. The -z3 simply compresses
-the download to improve speed.
-When this has finished, you will have exactly the same as if you had untarred a full
-tarball PLUS some extra directories and files that CVS needs to do the magic that
-it does.
+<BLOCKQUOTE><CODE>
+<PRE>
+accept/spots not on hf/cw or info iota
+</PRE>
+</CODE></BLOCKQUOTE>
+<P>which achieves exactly the same thing. You should choose one or the other
+until you are comfortable with the way it works. You can mix them if you
+wish (actually you can have an accept AND a reject on the same line) but
+don't attempt this until you are sure you know what you are doing!
<P>
-<P>Now if you are doing a new installation, that's it. Carry on as if you have
-just downloaded and untarred the lastest tarball.
+<P>You can arrange your filter lines into logical units, either for your own
+understanding or simply convenience. Here is an example ...
<P>
-<P>If you want to upgrade your current installation then do this ...
+<BLOCKQUOTE><CODE>
+<PRE>
+reject/spots 1 on hf/cw
+reject/spots 2 on 50000/1400000 not (by_zone 14,15,16 or call_zone 14,15,16)
+</PRE>
+</CODE></BLOCKQUOTE>
+<P>What this does is to ignore all HF CW spots and also rejects any spots on VHF
+which don't either originate or spot someone in Europe.
+<P>
+<P>This is an example where you would use a line number (1 and 2 in this case), if
+you leave the digit out, the system assumes '1'. Digits '0'-'9' are available.
+This make it easier to see just what filters you have set. It also makes it
+more simple to remove individual filters, during a contest for example.
+<P>
+<P>You will notice in the above example that the second line has brackets. Look
+at the line logically. You can see there are 2 separate sections to it. We
+are saying reject spots that are VHF or above <EM>APART</EM> from those in
+zones 14, 15 and 16 (either spotted there or originated there). If you did
+not have the brackets to separate the 2 sections, then Spider would read it
+logically from the front and see a different expression entirely ...
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+(on 50000/1400000 and by_zone 14,15,16) or call_zone 14,15,16
+</PRE>
+</CODE></BLOCKQUOTE>
+<P>The simple way to remember this is, if you use OR - use brackets. Whilst we are
+here CASE is not important. 'And BY_Zone' is just the same as 'and by_zone'.
+<P>As mentioned earlier, setting several filters can be more flexible than
+simply setting one complex one. Doing it in this way means that if you want
+to alter your filter you can just redefine or remove one or more lines of it or
+one line. For example ...
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+reject/spots 1 on hf/ssb
+</PRE>
+</CODE></BLOCKQUOTE>
+<P>would redefine our earlier example, or
<P>
<BLOCKQUOTE><CODE>
<PRE>
-tar cvfz /tmp/s.tgz spider
-cd /
-tar xvfzp /tmp/s.tgz
+clear/spots 1
</PRE>
</CODE></BLOCKQUOTE>
-<P>This is assuming you downloaded to the /tmp directory of course.
+<P>To remove all the filter lines in the spot filter ...
+<P>
+<BLOCKQUOTE><CODE>
+<PRE>
+clear/spots all
+</PRE>
+</CODE></BLOCKQUOTE>
+<P>
+<H2><A NAME="ss7.3">7.3 Filter options</A>
+</H2>
+
+<P>You can filter in several different ways. The options are listed in the
+various helpfiles for accept, reject and filter.
<P>
-<P>NOTE: the 'p' on the end of the 'xvfz' is IMPORTANT! It keeps the permissions
-correct. YOU WERE LOGGED IN AS THE USER SYSOP WEREN'T YOU?????
-<P>Remember to recompile the C client (cd /spider/src; make)
+<H2><A NAME="ss7.4">7.4 Default filters</A>
+</H2>
+
+<P>Sometimes all that is needed is a general rule for node connects. This can
+be done with a node_default filter. This rule will always be followed, even
+if the link is isolated, unless another filter is set specifically. Default
+rules can be set for nodes and users. They can be set for spots, announces,
+WWV and WCY. They can also be used for hops. An example might look like
+this ...
<P>
-<P>At this point the files have been upgraded. You can (usually) restrt the cluster
-in your own time. However, if you attempt to use any new commands or features
-expect it to be fatal! At least your cluster will have been restarted then so it
-will be too late to worry about it!
+<BLOCKQUOTE><CODE>
+<PRE>
+accept/spot node_default by_zone 14,15,16,20,33
+set/hops node_default spot 50
+</PRE>
+</CODE></BLOCKQUOTE>
+<P>This filter is for spots only, you could set others for announce, WWV and WCY.
+This filter would work for ALL nodes unless a specific filter is written to
+override it for a particular node. You can also set a user_default should
+you require. It is important to note that default filters should be
+considered to be "connected". By this I mean that should you override the
+default filter for spots, you need to add a rule for the hops for spots also.
+<P>
+<H2><A NAME="ss7.5">7.5 Advanced filtering</A>
+</H2>
+
+<P>Once you are happy with the results you get, you may like to experiment.
<P>
-<P>Now the magic part! From now on when you want to update, simply connect to the
-Internet and then, as the user <EM>sysop</EM> ...
+<P>The previous example that filters hf/cw spots and accepts vhf/uhf spots from EU
+can be written with a mixed filter, for example ...
<P>
<BLOCKQUOTE><CODE>
<PRE>
-cd /spider
-cvs -z3 update
+rej/spot on hf/cw
+acc/spot on 0/30000
+acc/spot 2 on 50000/1400000 and (by_zone 14,15,16 or call_zone 14,15,16)
</PRE>
</CODE></BLOCKQUOTE>
-<P>and your files will be updated. As above, remember to recompile the "C" client
-if it has been updated (CVS will tell you) and restart if any of the perl scripts
-have been altered or added, again, CVS will tell you.
+<P>Note that the first filter has not been specified with a number. This will
+automatically be assumed to be number 1. In this case, we have said <EM>reject all
+HF spots in the CW section of the bands but accept all others at HF. Also
+accept anything in VHF and above spotted in or by operators in the zones
+14, 15 and 16</EM>. Each filter slot actually has a 'reject' slot and
+an 'accept' slot. The reject slot is executed BEFORE the accept slot.
+<P>
+<P>It was mentioned earlier that after a reject test that doesn't match, the default
+for following tests is 'accept', the reverse is true for 'accept'. In the example
+what happens is that the reject is executed first, any non hf/cw spot is passed
+to the accept line, which lets through everything else on HF. The next filter line
+lets through just VHF/UHF spots from EU.
<P>
-<P>You will find any changes documented in the /spider/Changes file.
<P>
<HR>
<A HREF="adminmanual-8.html">Next</A>
projects / spider.git / blobdiff