The DXSpider Installation and Administration Manual
Ian Maude, G0VGS, (ianmaude@btinternet.com)
- Version 1.33 February 2001
+ $Date$ $Revision$
A reference for SysOps of the DXSpider DXCluster program.
______________________________________________________________________
- 1. Installation (Original version by Iain Phillips, G0RDI)
+ 1. Installation (Original version by Iain Philipps, G0RDI)
1.1 Introduction
1.2 Preparation
1.3 Installing the software
1.4 Setting callsigns etc
1.5 Starting up for the first time
+ 1.6 The Client program
- 2. The Client program
+ 2. Quick installation guide
3. Configuration
3.1 Allowing ax25 connects from users
3.2 Allowing telnet connects from users
- 3.3 Setting up node connects
- 3.4 Connection scripts
- 3.5 Starting the connection
- 3.6 Telnet echo
+ 3.3 Setting up telnet connects (from 1.47 onwards)
+ 3.4 Setting up for AGW Engine (1.47 onwards)
+ 3.5 Setting up node connects
+ 3.6 Connection scripts
+ 3.7 Starting the connection
+ 3.8 Telnet echo
4. Automating things
13.101 show/badnode (6)
13.102 show/badspotter (1)
13.103 show/date (0)
- 13.104 show/dx (0)
- 13.105 show/dxcc (0)
- 13.106 show/files (0)
- 13.107 show/filter (0)
- 13.108 show/filter (extended for sysops) (5)
- 13.109 show/hops (8)
- 13.110 show/isolate (1)
- 13.111 show/lockout (9)
- 13.112 show/log (8)
- 13.113 show/moon (0)
- 13.114 show/muf (0)
- 13.115 show/node (1)
- 13.116 show/prefix (0)
- 13.117 show/program (5)
- 13.118 show/qra (0)
- 13.119 show/qrz (0)
- 13.120 show/route (0)
- 13.121 show/satellite (0)
- 13.122 show/sun (0)
- 13.123 show/time (0)
- 13.124 show/wcy (0)
- 13.125 show/wwv (0)
- 13.126 shutdown (5)
- 13.127 spoof (9)
- 13.128 stat/db (5)
- 13.129 stat/channel (5)
- 13.130 stat/msg (5)
- 13.131 stat/user (5)
- 13.132 sysop (0)
- 13.133 talk (0)
- 13.134 type (0)
- 13.135 who (0)
- 13.136 wx (0)
- 13.137 wx (enhanced for sysops) (5)
+ 13.104 show/debug (9)
+ 13.105 show/dx (0)
+ 13.106 show/dxcc (0)
+ 13.107 show/files (0)
+ 13.108 show/filter (0)
+ 13.109 show/filter (extended for sysops) (5)
+ 13.110 show/hops (8)
+ 13.111 show/isolate (1)
+ 13.112 show/lockout (9)
+ 13.113 show/log (8)
+ 13.114 show/moon (0)
+ 13.115 show/muf (0)
+ 13.116 show/node (1)
+ 13.117 show/prefix (0)
+ 13.118 show/program (5)
+ 13.119 show/qra (0)
+ 13.120 show/qrz (0)
+ 13.121 show/route (0)
+ 13.122 show/satellite (0)
+ 13.123 show/sun (0)
+ 13.124 show/time (0)
+ 13.125 show/wcy (0)
+ 13.126 show/wwv (0)
+ 13.127 shutdown (5)
+ 13.128 spoof (9)
+ 13.129 stat/db (5)
+ 13.130 stat/channel (5)
+ 13.131 stat/msg (5)
+ 13.132 stat/user (5)
+ 13.133 sysop (0)
+ 13.134 talk (0)
+ 13.135 type (0)
+ 13.136 who (0)
+ 13.137 wx (0)
+ 13.138 wx (enhanced for sysops) (5)
______________________________________________________________________
- 1\b1.\b. I\bIn\bns\bst\bta\bal\bll\bla\bat\bti\bio\bon\bn (\b(O\bOr\bri\big\bgi\bin\bna\bal\bl v\bve\ber\brs\bsi\bio\bon\bn b\bby\by I\bIa\bai\bin\bn P\bPh\bhi\bil\bll\bli\bip\bps\bs,\b, G\bG0\b0R\bRD\bDI\bI)\b)
+ 1\b1.\b. I\bIn\bns\bst\bta\bal\bll\bla\bat\bti\bio\bon\bn (\b(O\bOr\bri\big\bgi\bin\bna\bal\bl v\bve\ber\brs\bsi\bio\bon\bn b\bby\by I\bIa\bai\bin\bn P\bPh\bhi\bil\bli\bip\bpp\bps\bs,\b, G\bG0\b0R\bRD\bDI\bI)\b)
1\b1.\b.1\b1.\b. I\bIn\bnt\btr\bro\bod\bdu\buc\bct\bti\bio\bon\bn
- This section describes the installation of DX Spider v1.35 on a RedHat
- Linux Distribution. I do not intend to try and cover the installation
- of Linux or the setup of the AX25 utilities. If you need help on this
- then read Iains original HOWTO on the DXSpider website.
+ This section describes the installation of DX Spider v1.46 on a RedHat
+ Linux Distribution. Wherever possible I will try to include
+ differences for other distributions. I do not intend to try and cover
+ the installation of Linux or the setup of the AX25 utilities. If you
+ need help on this then read Iains original installation guide that
+ comes with the Spider distribution.
I am assuming a general knowledge of Linux and its commands. You
editor.
- The crucial ingredient for all of this is Perl 5.004. Now I know Perl
- 5.005 is out and this will almost certainly work with it, but RedHat
- 5.1 comes with 5.004. _\bB_\be _\bW_\ba_\br_\bn_\be_\bd, earlier versions of RedHat d\bdo\bo n\bno\bot\bt
- come with 5.004 as standard, you need to upgrade
+ The crucial ingredient for all of this is Perl. Earlier versions of
+ Spider required perl 5.004, however it is now _\bS_\bT_\bR_\bO_\bN_\bG_\bL_\bY recommended
+ that you use at least version 5.005_03 as this is the version being
+ used in the development of Spider.
In addition to the standard Red Hat distribution you will require the
- following CPAN modules: -
+ following modules from http://www.cpan.org/CPAN.html ...
- +\bo MD5-1.7.tar.gz
+ +\bo Data-Dumper-2.101.tar.gz
- +\bo Data-Dumper-2.10.tar.gz
+ +\bo TimeDate-1.10.tar.gz
- +\bo FreezeThaw-0.3.tar.gz
-
- +\bo MLDBM-2.00.tar.gz
-
- +\bo TimeDate-1.08.tar.gz
-
- +\bo IO-1.20.tar.gz
+ +\bo IO-1.20.tar.gz (for perl 5.00403 and lower)
+\bo Net-Telnet-3.02.tar.gz
I will assume that you have already downloaded the latest tarball of
the DXSpider software and are ready to install it. I am assuming
- version 1.35 for this section but of course you would use the latest
+ version 1.46 for this section but of course you would use the latest
version.
# cd ~sysop
- # tar xvfz spider-1.35.tar.gz
+ # tar xvfz spider-1.46.tar.gz
# ln -s ~sysop/spider /spider
# groupadd -g 251 spider (or another number)
P\bPL\bLE\bEA\bAS\bSE\bE U\bUS\bSE\bE C\bCA\bAP\bPI\bIT\bTA\bAL\bL L\bLE\bET\bTT\bTE\bER\bRS\bS F\bFO\bOR\bR C\bCA\bAL\bLL\bLS\bSI\bIG\bGN\bNS\bS
- DON'T alter the DXVars.pm (or any other file) in /spider/perl, they
- are overwritten with every release. Any files or commands you place in
- /spider/local or /spider/local_cmd will automagically be used in
- preference to the ones in /spider/perl EVEN while the cluster is
- running!
+ DON'T alter any file in /spider/perl, they are overwritten with every
+ release. Any files or commands you place in /spider/local or
+ /spider/local_cmd will automagically be used in preference to the ones
+ in /spider/perl EVEN while the cluster is running!
Save the new file and change directory to ../perl ....
- $ create_sysop.pl
+ $ ./create_sysop.pl
- $ cluster.pl
- DXSpider DX Cluster Version 1.35
+ $ ./cluster.pl
+ DXSpider DX Cluster Version 1.46
Copyright (c) 1998 Dirk Koopman G1TLH
loading prefixes ...
loading band data ...
If all is well then login on another term or console as _\bs_\by_\bs_\bo_\bp and cd
- to /spider/perl. Now issue the following command ...
- $ client.pl
+ to /spider/src. Now issue the following command ...
+
+ $ ./client
and both the cluster and the client should return to Linux prompts.
- 2\b2.\b. T\bTh\bhe\be C\bCl\bli\bie\ben\bnt\bt p\bpr\bro\bog\bgr\bra\bam\bm
+ 1\b1.\b.6\b6.\b. T\bTh\bhe\be C\bCl\bli\bie\ben\bnt\bt p\bpr\bro\bog\bgr\bra\bam\bm
In earlier versions of Spider, all the processes were Perl scripts.
This was fine but with a lot of users your computer memory would soon
small C program called _\bc_\bl_\bi_\be_\bn_\bt. Leave it in this directory.
+
+ 2\b2.\b. Q\bQu\bui\bic\bck\bk i\bin\bns\bst\bta\bal\bll\bla\bat\bti\bio\bon\bn g\bgu\bui\bid\bde\be
+
+ This section is designed for experienced Spider sysops who want to
+ install Spider from scratch. It is simply a check list of things that
+ need to be done without any explanations. The name in brackets at the
+ end of each line is the user that should be doing that process.
+
+
+ +\bo Login as root
+
+ +\bo Get the additional CPAN modules and install them (root)
+
+ +\bo Create the "sysop" user and set a password (root)
+
+ +\bo Put the Spider tarball in sysop and untar it (root)
+
+ +\bo ln -s sysop/spider /spider (root)
+
+ +\bo groupadd -g 251 spider (root)
+
+ +\bo Add any more users you need to the group entry in /etc/group (root)
+
+ +\bo Set the permissions on the spider tree (root)
+
+ +\bo Fix permissions on ax25_call and netrom_call (root)
+
+ +\bo Login as the sysop user
+
+ +\bo cd to /spider (sysop)
+
+ +\bo mkdir local (sysop)
+
+ +\bo mkdir local_cmd (sysop)
+
+ +\bo cp perl/DXVars.pm.issue local/DXVars.pm (sysop)
+
+ +\bo cd to /spider/local and edit DXVars to set your details (sysop)
+
+ +\bo cd ../perl (sysop)
+
+ +\bo ./create_sysop.pl (sysop)
+
+ +\bo ./cluster.pl (sysop)
+
+ Spider should now be running and you should be able to login using the
+ client program.
+
+
+ +\bo Login as root
+
+ +\bo Enter the correct line in ax25d.conf (root)
+
+ +\bo Enter the correct line in /etc/services (root)
+
+ +\bo Enter the correct line in /etc/inetd.conf (root)
+
+ +\bo killall -HUP inetd (root)
+
+ Spider should now be able to accept logins via telnet, netrom and
+ ax25.
+
+
+ +\bo Login as sysop
+
+ +\bo Start the cluster (sysop)
+
+ +\bo set/node and type for links (sysop)
+
+ +\bo Write any connect scripts (sysop)
+
+ +\bo Edit /spider/crontab as required (sysop)
+
+ +\bo Edit any other files as necessary (sysop)
+
+ +\bo Set filters, hops and forwarding files (sysop)
+
+ +\bo Login as root
+
+ +\bo Enter the correct line in /etc/inittab (root)
+
+
3\b3.\b. C\bCo\bon\bnf\bfi\big\bgu\bur\bra\bat\bti\bio\bon\bn
+
+
+
3\b3.\b.1\b1.\b. A\bAl\bll\blo\bow\bwi\bin\bng\bg a\bax\bx2\b25\b5 c\bco\bon\bnn\bne\bec\bct\bts\bs f\bfr\bro\bom\bm u\bus\bse\ber\brs\bs
As stated previously, the aim of this document is not to tell you how
+ or, if you wish your users to be able to use SSID's on their callsigns
+ ..
+
+
+
+ default * * * * * * - sysop /spider/src/client client %s ax25
+
+
+
+
+ For most purposes this is not desirable. The only time you probably
+ will need this is when you need to allow other cluster nodes that are
+ using SSID's in. In this case it owuld probably be better to use the
+ first example and then add a specific line for that node like this:
+
+
+
+ GB7DJK-2 * * * * * * - sysop /spider/src/client client gb7djk-2 ax25
+ default * * * * * * - sysop /spider/src/client client %u ax25
+
3\b3.\b.2\b2.\b. A\bAl\bll\blo\bow\bwi\bin\bng\bg t\bte\bel\bln\bne\bet\bt c\bco\bon\bnn\bne\bec\bct\bts\bs f\bfr\bro\bom\bm u\bus\bse\ber\brs\bs
+
+ From version 1.47 there is a new (more efficient) way of doing this
+ (see next section) but, if you prefer, the method of doing it
+ described here will continue to work just fine.
+
+
Allowing telnet connections is quite simple. Firstly you need to add
a line in /etc/services to allow connections to a port number, like
this ....
- spdlogin 8000/tcp # spider anonymous login port
+ spdlogin 7300/tcp # spider anonymous login port
-
-
- This needs to be added above the standard services such as ftp, telnet
- etc. Once this is done, you need to restart inetd like this ....
+ Once this is done, you need to restart inetd like this ....
- Now login as _\bs_\by_\bs_\bo_\bp and cd spider/perl. You can test that spider is
+ Now login as _\bs_\by_\bs_\bo_\bp and cd spider/src. You can test that spider is
accepting telnet logins by issuing the following command ....
- client.pl login telnet
+ ./client login telnet
- telnet localhost 8000
+ telnet localhost 7300
You should now get the login prompt and be able to login as before.
+ 3\b3.\b.3\b3.\b. S\bSe\bet\btt\bti\bin\bng\bg u\bup\bp t\bte\bel\bln\bne\bet\bt c\bco\bon\bnn\bne\bec\bct\bts\bs (\b(f\bfr\bro\bom\bm 1\b1.\b.4\b47\b7 o\bon\bnw\bwa\bar\brd\bds\bs)\b)
+
+ From version 1.47 you can chose to allow the perl cluster.pl program
+ to allow connections direct (i.e. not via the /spider/src/client
+ interface program). If you are using Windows then this is the only
+ method available of allowing incoming telnet connections.
+
+
+ To do this you need first to remove any line that you may previously
+ have set up in /etc/inetd.conf. Remember to:-
+
+
+
+ killall -HUP inetd
+
+
+
+
+
+ to make the change happen...
+
+
+ Having done that then you need to copy the file
+ /spider/perl/Listeners.pm to /spider/local and then edit it. You will
+ need to uncomment the line containing "0.0.0.0" and select the correct
+ port to listen on. So that it looks like this:-
+ @listen = (
+ ["0.0.0.0", 7300],
+ );
+
+
+
+
+
+ As standard, the listener will listen on all interfaces
+ simultaniously. If you require more control than this, you can specify
+ each interface individually:-
+
+
+
+ @listen = (
+ ["gb7baa.dxcluster.net", 7300],
+ ["44.131.16.2", 6300],
+ );
+
+
+
+
+
+ This will only be successful if the IP addresses on each interface are
+ static. If you are using some kind of dynamic IP addressing then the
+ 'default' method is the only one which will work.
+
+
+ Restart the cluster.pl program to enable the listener.
+
+
+ One important difference with the internal listener is that no echoing
+ is done by the cluster program. Users will need to set 'local-echo' on
+ in their telnet clients if it isn't set automatically (as per the
+ standards). Needless to say this will probably only apply to Windows
+ users.
+
+
+ 3\b3.\b.4\b4.\b. S\bSe\bet\btt\bti\bin\bng\bg u\bup\bp f\bfo\bor\br A\bAG\bGW\bW E\bEn\bng\bgi\bin\bne\be (\b(1\b1.\b.4\b47\b7 o\bon\bnw\bwa\bar\brd\bds\bs)\b)
+
+ AGW Engine is a Windows based ax25 stack. You can connect to an AGW
+ engine from Linux as well as Windows based machines.
+
+
+ In order to enable access to an AGW Engine you need to copy
+ /spider/perl/AGWConnect.pm to /spider/local and edit it. Specifically
+ you must:-
+
+
+ +\bo set $enable to 1.
+
+ +\bo set $login and $passwd to the values set up in your AGW
+ installation. If you haven't set any there, then you should not
+ touch these values.
+
+ +\bo You can connect to a remote AGW engine (ie on some other machine)
+ by changing $addr and $port appropriately.
+
+ +\bo Restart the cluster.pl program
+
+
+
- 3\b3.\b.3\b3.\b. S\bSe\bet\btt\bti\bin\bng\bg u\bup\bp n\bno\bod\bde\be c\bco\bon\bnn\bne\bec\bct\bts\bs
+
+
+ 3\b3.\b.5\b5.\b. S\bSe\bet\btt\bti\bin\bng\bg u\bup\bp n\bno\bod\bde\be c\bco\bon\bnn\bne\bec\bct\bts\bs
In order to allow cluster node connections, spider needs to know that
the connecting callsign is a cluster node. This is the case whether
Start up the cluster as you did before and login as the sysop with
- client.pl. The cluster node I am wanting to make a connection to is
+ client. The cluster node I am wanting to make a connection to is
GB7BAA but you would obviously use whatever callsign you required. At
the prompt type ...
That is now set, it is as simple as that. To prove it, login on yet
- another console as sysop and issue the command ...
+ another console as sysop, cd to spider/src and issue the command ...
- client.pl gb7baa (using the callsign you set as a node)
+ ./client gb7baa (using the callsign you set as a node)
- client.pl gb7baa
+ ./client gb7baa
PC38^GB7MBC^~
If the callsign you just set up as a cluster node is for an incoming
be outgoing then a connection script needs to be written.
- 3\b3.\b.4\b4.\b. C\bCo\bon\bnn\bne\bec\bct\bti\bio\bon\bn s\bsc\bcr\bri\bip\bpt\bts\bs
+ Sometimes you make a mistake... Honest, it does happen. If you want
+ to make a node back to being a normal user, regardless of what type it
+ is, do:
+
+
+
+ unset/node gb7baa
+
+
+
+
+
+ 3\b3.\b.6\b6.\b. C\bCo\bon\bnn\bne\bec\bct\bti\bio\bon\bn s\bsc\bcr\bri\bip\bpt\bts\bs
Because DXSpider operates under Linux, connections can be made using
just about any protocol; AX25, NETRom, tcp/ip, ROSE etc are all
- # All lines starting with a # are ignored, as are completely
- blank lines.
+ #\b# All lines starting with a # are ignored, as are completely blank
+ lines.
+
+
+ t\bti\bim\bme\beo\bou\but\bt
+ timeout followed by a number is the number of seconds to wait
+ for a command to complete. If there is no timeout specified in
+ the script then the default is 60 seconds.
- timeout timeout followed by a number is the number of seconds to wait for a
- command to complete. If there is no timeout specified in the script
- then the default is 60 seconds.
- abort abort is a regular expression containing one or more strings to look
- for to abort a connection. This is a perl regular expression and is
- executed ignoring case.
+ a\bab\bbo\bor\brt\bt
+ abort is a regular expression containing one or more strings to
+ look for to abort a connection. This is a perl regular
+ expression and is executed ignoring case.
- connect connect followed by ax25 or telnet and some type dependent
- information. In the case of a telnet connection, there can be up to
- two parameters.
- The first is the ip address or hostname of the computer you wish to
- connect to and the second is the port number you want to use (this
- can be left out if it is a normal telnet session).
- In the case of an ax25 session then this would normally be a call to
- ax25_call or netrom_call as in the example above. It is your
- responsibility to get your node and other ax25 parameters to work
- before going down this route!
- ' line in a chat type script. The words/phrases normally come in pairs,
- either can be empty. Each line reads input from the connection until
- it sees the string (or perl regular expression) contained in the
- left hand string. If the left hand string is empty then it doesn't
- read or wait for anything. The comparison is done ignoring case.
- When the left hand string has found what it is looking for (if it is)
- then the right hand string is sent to the connection.
- This process is repeated for every line of chat script.
+ c\bco\bon\bnn\bne\bec\bct\bt
+ connect followed by ax25, agw (for Windows users) or telnet and
+ some type dependent information. In the case of a telnet
+ connection, there can be up to two parameters. The first is the
+ ip address or hostname of the computer you wish to connect to
+ and the second is the port number you want to use (this can be
+ left out if it is a normal telnet session). In the case of an
+ ax25 session then this would normally be a call to ax25_call or
+ netrom_call as in the example above. It is your responsibility
+ to get your node and other ax25 parameters to work before going
+ down this route!
- client client starts the connection, put the arguments you would want here
- if you were starting the client program manually. You only need this
- if the script has a different name to the callsign you are trying to
- connect to (i.e. you have a script called other which actually
- connects to GB7DJK-1 [instead of a script called gb7djk-1]).
+ '\b' line in a chat type script. The words/phrases normally come in
+ pairs, either can be empty. Each line reads input from the
+ connection until it sees the string (or perl regular expression)
+ contained in the left hand string. If the left hand string is
+ empty then it doesn't read or wait for anything. The comparison
+ is done ignoring case. When the left hand string has found what
+ it is looking for (if it is) then the right hand string is sent
+ to the connection. This process is repeated for every line of
+ chat script.
+ c\bcl\bli\bie\ben\bnt\bt
+ client starts the connection, put the arguments you would want
+ here if you were starting the client program manually. You only
+ need this if the script has a different name to the callsign you
+ are trying to connect to (i.e. you have a script called other
+ which actually connects to GB7DJK-1 [instead of a script called
+ gb7djk-1]).
- There are many possible ways to configure the script but here are two
- examples, one for a NETRom/AX25 connect and one for tcp/ip.
+ There are many possible ways to configure the script but here are
+ three examples, one for a NETRom/AX25 connect, one for AGW engines and
+ one for tcp/ip.
+ timeout 60
+ abort (Busy|Sorry|Fail)
+ # don't forget to chmod 4775 netrom_call!
+ connect ax25 /usr/sbin/netrom_call bbs gb7djk g1tlh
+ # you can leave this out if you call the script 'gb7dxm'
+ client gb7dxm ax25
+
- timeout 60
- abort (Busy|Sorry|Fail)
- # don't forget to chmod 4775 netrom_call!
- connect ax25 /usr/sbin/netrom_call bbs gb7djk g1tlh
- # you can leave this out if you call the script 'gb7dxm'
- client gb7dxm ax25
+
+
+
+
+
+
+ timeout 60
+ abort (Busy|Sorry|Fail)
+ # this does exactly the same as the previous example
+ # the '1' is the AGW port number to connect thru for g1tlh
+ connect agw 1 g1tlh
+ # you can leave this out if you call the script 'gb7dxm'
+ client gb7dxm ax25
directory.
- 3\b3.\b.5\b5.\b. S\bSt\bta\bar\brt\bti\bin\bng\bg t\bth\bhe\be c\bco\bon\bnn\bne\bec\bct\bti\bio\bon\bn
+
+
+ 3\b3.\b.7\b7.\b. S\bSt\bta\bar\brt\bti\bin\bng\bg t\bth\bhe\be c\bco\bon\bnn\bne\bec\bct\bti\bio\bon\bn
You start the connection, from within a sysop enabled cluster login,
by typing in the word _\bc_\bo_\bn_\bn_\be_\bc_\bt followed by a script name like this ....
This will start a connection using the script called _\bg_\bb_\b7_\bd_\bj_\bk_\b-_\b1. You
can follow the connection by watching the term or console from where
- you started _\bc_\bl_\bu_\bs_\bt_\be_\br_\b._\bp_\bl. You should see something like this ...
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- <- D G1TLH connect gb7djk-1
- -> D G1TLH connection to GB7DJK-1 started
- -> D G1TLH G1TLH de GB7DJK 13-Dec-1998 2046Z >
- timeout set to 15
- CONNECT sort: telnet command: dirkl.tobit.co.uk
- CHAT "login" -> "gb7djk"
- received "
- Red Hat Linux release 5.1 (Manhattan)
- Kernel 2.0.35 on an i586
- "
- received "login: "
- sent "gb7djk"
- CHAT "word" -> "gb7djk"
- received "gb7djk"
- received "Password: "
- sent "gb7djk"
- Connected to GB7DJK-1, starting normal protocol
- <- O GB7DJK-1 telnet
- -> B GB7DJK-1 0
- GB7DJK-1 channel func state 0 -> init
- <- D GB7DJK-1
- <- D GB7DJK-1 Last login: Sun Dec 13 17:59:56 from dirk1
- <- D GB7DJK-1 PC38^GB7DJK-1^~
- <- D GB7DJK-1 PC18^ 1 nodes, 0 local / 1 total users Max users 0 Uptime
- 0 00:00^5447^~
- etc
+ you started _\bc_\bl_\bu_\bs_\bt_\be_\br_\b._\bp_\bl. From version 1.47 onwards, you will need to
+ set/debug connect first. You should see something like this ...
+
+
+
+ <- D G1TLH connect gb7djk-1
+ -> D G1TLH connection to GB7DJK-1 started
+ -> D G1TLH G1TLH de GB7DJK 13-Dec-1998 2046Z >
+ timeout set to 15
+ CONNECT sort: telnet command: dirkl.tobit.co.uk
+ CHAT "login" -> "gb7djk"
+ received "
+ Red Hat Linux release 5.1 (Manhattan)
+ Kernel 2.0.35 on an i586
+ "
+ received "login: "
+ sent "gb7djk"
+ CHAT "word" -> "gb7djk"
+ received "gb7djk"
+ received "Password: "
+ sent "gb7djk"
+ Connected to GB7DJK-1, starting normal protocol
+ <- O GB7DJK-1 telnet
+ -> B GB7DJK-1 0
+ GB7DJK-1 channel func state 0 -> init
+ <- D GB7DJK-1
+ <- D GB7DJK-1 Last login: Sun Dec 13 17:59:56 from dirk1
+ <- D GB7DJK-1 PC38^GB7DJK-1^~
+ <- D GB7DJK-1 PC18^ 1 nodes, 0 local / 1 total users Max users 0 Uptime
+ 0 00:00^5447^~
+ etc
-
-
In a script, this might look like ...
- 3\b3.\b.6\b6.\b. T\bTe\bel\bln\bne\bet\bt e\bec\bch\bho\bo
+ 3\b3.\b.8\b8.\b. T\bTe\bel\bln\bne\bet\bt e\bec\bch\bho\bo
Cluster links in particular suffer greatly from the presence of telnet
echo. This is caused by the telnet negotiation itself and can create
Telnet echo itself should only be a problem if the connection is being
made to the telnet port (23). This port uses special rules that
include echo negotiation. If the connection is to a different port,
- such as 8000, this negotiation does not happen and therefore no echo
+ such as 7300, this negotiation does not happen and therefore no echo
should be present.
- This line works fine for RedHat and SuSE distributions. The line
- required for Slackware distributions is slightly different. My thanks
- to Aurelio, PA3EZL for this information.
+
+ This line works fine for RedHat distributions. It is also fine for
+ SuSE up to 7.0. From Suse 7.1 you need to add runlevels 2 and 5 like
+ this ...
+
+
+
+ DX:235:respawn:/bin/su -c "/usr/bin/perl -w /spider/perl/cluster.pl" sysop >/dev/tty7
+
+
+
+
+
+ The line required for Slackware distributions is slightly different.
+ My thanks to Aurelio, PA3EZL for this information.
- # check every 10 minutes to see if gb7xxx is connected and if not
- # start a connect job going
- 0,10,20,30,40,50 * * * * start_connect('gb7xxx') if !connected('gb7xxx')
+
+
+ # check every 10 minutes to see if gb7xxx is connected and if not
+ # start a connect job going
+
+ 0,10,20,30,40,50 * * * * start_connect('gb7xxx') if unless connected('gb7xxx')
- #
- # hop table construction
- #
- package DXProt;
- # default hopcount to use
- $def_hopcount = 5;
- # some variable hop counts based on message type
- %hopcount =
- (
- 11 => 10,
- 16 => 10,
- 17 => 10,
- 19 => 10,
- 21 => 10,
- );
- # the per node hop control thingy
- %nodehops =
- GB7ADX => { 11 => 8,
- 12 => 8,
- 16 => 8,
- 17 => 8,
- 19 => 8,
- 21 => 8,
- },
- GB7UDX => { 11 => 8,
- 12 => 8,
- 16 => 8,
- 17 => 8,
- 19 => 8,
- 21 => 8,
- },
- GB7BAA => {
- 11 => 5,
- 12 => 8,
- 16 => 8,
- 17 => 8,
- 19 => 8,
- 21 => 8,
- },
- };
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ #
+ # hop table construction
+ #
+
+ package DXProt;
+
+ # default hopcount to use
+ $def_hopcount = 5;
+
+ # some variable hop counts based on message type
+ %hopcount =
+ (
+ 11 => 10,
+ 16 => 10,
+ 17 => 10,
+ 19 => 10,
+ 21 => 10,
+ );
+
+
+ # the per node hop control thingy
+
+
+ %nodehops =
+
+ GB7ADX => { 11 => 8,
+ 12 => 8,
+ 16 => 8,
+ 17 => 8,
+ 19 => 8,
+ 21 => 8,
+ },
+
+ GB7UDX => { 11 => 8,
+ 12 => 8,
+ 16 => 8,
+ 17 => 8,
+ 19 => 8,
+ 21 => 8,
+ },
+ GB7BAA => {
+ 11 => 5,
+ 12 => 8,
+ 16 => 8,
+ 17 => 8,
+ 19 => 8,
+ 21 => 8,
+ },
+ };
will bring your changes into effect.
+
5\b5.\b.2\b2.\b. I\bIs\bso\bol\bla\bat\bti\bin\bng\bg n\bne\bet\btw\bwo\bor\brk\bks\bs
It is possible to isolate networks from each other on a "gateway" node
+
+
+
+
+
0 = frequency
1 = call
2 = date in unix format
directly or nested under directories. One use for this would be to
store DX bulletins such as the OPDX bulletins. These can be listed
and read by the user. To keep things tidy, make a directory under
- /spider/packclus called _\bb_\bu_\bl_\bl_\be_\bt_\bi_\bn_\bs. Now copy any OPDX or similar
+ /spider/packclus called _\bb_\bu_\bl_\bl_\be_\bt_\bi_\bn. Now copy any OPDX or similar
bulletins into it. These can be listed by the user in the same way as
- above using the _\bs_\bh_\bo_\bw_\b/_\bf_\bi_\bl_\be_\bs command with an extension for the bulletins
+ above using the _\bs_\bh_\bo_\bw_\b/_\bf_\bi_\bl_\be_\bs command with an extension for the bulletin
directory you have just created, like this ....
- show/files bulletins
+ show/files bulletin
sh/files
- bulletins DIR 20-Dec-1999 1715Z news 1602 14-Dec-1999 1330Z
+ bulletin DIR 20-Dec-1999 1715Z news 1602 14-Dec-1999 1330Z
You can see that in the files area (basically the packclus directory)
- there is a file called _\bn_\be_\bw_\bs and a directory called _\bb_\bu_\bl_\bl_\be_\bt_\bi_\bn_\bs. You can
+ there is a file called _\bn_\be_\bw_\bs and a directory called _\bb_\bu_\bl_\bl_\be_\bt_\bi_\bn. You can
also see that dates they were created. In the case of the file _\bn_\be_\bw_\bs,
you can also see the time it was last modified, a good clue as to
whether the file has been updated since you last read it. To read the
- To look what is in the bulletins directory you issue the command ....
+ To look what is in the bulletin directory you issue the command ....
- show/files bulletins
+ show/files bulletin
opdx390 21381 29-Nov-1999 1621Z opdx390.1 1670 29-Nov-1999 1621Z
opdx390.2 2193 29-Nov-1999 1621Z opdx391 25045 29-Nov-1999 1621Z
opdx392 35969 29-Nov-1999 1621Z opdx393 15023 29-Nov-1999 1621Z
- type bulletins/opdx391
+ type bulletin/opdx391
Ohio/Penn DX Bulletin No. 391
The Ohio/Penn Dx PacketCluster
DX Bulletin No. 391
In later versions of Spider a simple console program is provided for
the sysop. This has a type ahead buffer with line editing facilities
and colour for spots, announces etc. To use this program, simply use
- console.pl instead of client.pl.
+ console.pl instead of client.
To edit the colours, copy /spider/perl/Console.pl to /spider/local and
s\bse\bet\bt/\b/d\bde\beb\bbu\bug\bg <\b<n\bna\bam\bme\be>\b> Add a debug level to the debug set
- You can remove this level with unset/debug <name>
+ You can choose to log several different levels. The levels are
+
+ chan state msg cron connect
+
+ You can show what levels you are logging with the _\bs_\bh_\bo_\bw_\b/_\bd_\be_\bb_\bu_\bg command.
+
+ You can remove a debug level with unset/debug <name>
1\b13\b3.\b.7\b72\b2.\b. s\bse\bet\bt/\b/d\bdx\bx (\b(0\b0)\b)
You can stop DX messages with the _\bu_\bn_\bs_\be_\bt_\b/_\bd_\bx command
+
+
1\b13\b3.\b.7\b73\b3.\b. s\bse\bet\bt/\b/d\bdx\bxg\bgr\bri\bid\bd (\b(0\b0)\b)
s\bse\bet\bt/\b/d\bdx\bxg\bgr\bri\bid\bdAllow grid squares on the end of DX messages
Some logging programs do not like the additional information at the
end of a DX spot. If this is the case, use the _\bu_\bn_\bs_\be_\bt_\b/_\bd_\bx_\bg_\br_\bi_\bd command
to remove the grid squares.
+
+
1\b13\b3.\b.7\b74\b4.\b. s\bse\bet\bt/\b/d\bdx\bxn\bne\bet\bt (\b(5\b5)\b)
s\bse\bet\bt/\b/d\bdx\bxn\bne\bet\bt <\b<n\bno\bod\bde\be_\b_c\bca\bal\bll\bl>\b> [\b[<\b<n\bno\bod\bde\be_\b_c\bca\bal\bll\bl>\b> .\b..\b..\b.]\b] Make the node_call a DXNet
+
+
1\b13\b3.\b.7\b78\b8.\b. s\bse\bet\bt/\b/h\bho\bop\bps\bs (\b(8\b8)\b)
s\bse\bet\bt/\b/h\bho\bop\bps\bs <\b<n\bno\bod\bde\be_\b_c\bca\bal\bll\bl>\b> a\ban\bnn\bn|\b|s\bsp\bpo\bot\bts\bs|\b|w\bww\bwv\bv|\b|w\bwc\bcy\by <\b<n\bn>\b> Set hop count
- eg:
- set/hops gb7djk ann 10
- set/hops gb7mbc spots 20
+ eg:
+ set/hops gb7djk ann 10
+ set/hops gb7mbc spots 20
-
1\b13\b3.\b.8\b82\b2.\b. s\bse\bet\bt/\b/s\bsy\bys\bs_\b_l\blo\boc\bca\bat\bti\bio\bon\bn (\b(9\b9)\b)
s\bse\bet\bt/\b/s\bsy\bys\bs_\b_l\blo\boc\bca\bat\bti\bio\bon\bn <\b<l\bla\bat\bt &\b& l\blo\bon\bng\bg>\b> Set your cluster latitude and longitude
example:-
+
SET/LOCATION 52 22 N 0 57 E
- set/spider
- set/dxnet
- set/clx
- set/arcluster
+ set/spider
+ set/dxnet
+ set/clx
+ set/arcluster
- To see what your nodes are set to, use the _\bs_\bh_\bo_\bw_\b/_\bn_\bo_\bd_\be_\bs command.
-
+ To see what your nodes are set to, use the _\bs_\bh_\bo_\bw_\b/_\bn_\bo_\bd_\be_\bs command.
1\b13\b3.\b.8\b87\b7.\b. s\bse\bet\bt/\b/o\bob\bbs\bsc\bco\bou\bun\bnt\bt (\b(9\b9)\b)
type password.
+
1\b13\b3.\b.9\b90\b0.\b. s\bse\bet\bt/\b/p\bpi\bin\bng\bgi\bin\bnt\bte\ber\brv\bva\bal\bl (\b(9\b9)\b)
s\bse\bet\bt/\b/p\bpi\bin\bng\bgi\bin\bnt\bte\ber\brv\bva\bal\bl <\b<t\bti\bim\bme\be>\b> <\b<n\bno\bod\bde\be c\bca\bal\bll\bl>\b> Set the ping time to neighbouring
in future, to affect routing decisions. The default interval is 300
secs or 5 minutes.
-
You can use this command to set a different interval. Please don't.
But if you do the value you enter is treated as minutes up 60 and
+
1\b13\b3.\b.9\b95\b5.\b. s\bse\bet\bt/\b/q\bqt\bth\bh (\b(0\b0)\b)
s\bse\bet\bt/\b/q\bqt\bth\bh <\b<y\byo\bou\bur\br Q\bQT\bTH\bH>\b> Set your QTH
WX messages with the _\bu_\bn_\bs_\be_\bt_\b/_\bw_\bx command.
+
+
+
1\b13\b3.\b.1\b10\b00\b0.\b. s\bsh\bho\bow\bw/\b/b\bba\bad\bdd\bdx\bx (\b(1\b1)\b)
s\bsh\bho\bow\bw/\b/b\bba\bad\bdd\bdx\bxShow all the bad dx calls in the system
s\bsh\bho\bow\bw/\b/b\bba\bad\bdn\bno\bod\bde\be Show all the bad nodes in the system
-
Display all the bad node callsigns in the system, see SET/BADNODE for
more information.
1\b13\b3.\b.1\b10\b02\b2.\b. s\bsh\bho\bow\bw/\b/b\bba\bad\bds\bsp\bpo\bot\btt\bte\ber\br (\b(1\b1)\b)
- s\bsh\bho\bow\bw/\b/b\bba\bad\bds\bsp\bpo\bot\btt\bte\ber\brShow all the bad spotters in the system
+ s\bsh\bho\bow\bw/\b/b\bba\bad\bds\bsp\bpo\bot\btt\bte\ber\br Show all the bad spotters in the system
Display all the bad spotter's callsigns in the system, see
including DST) at the prefixes or callsigns that you specify.
- 1\b13\b3.\b.1\b10\b04\b4.\b. s\bsh\bho\bow\bw/\b/d\bdx\bx (\b(0\b0)\b)
-
- s\bsh\bho\bow\bw/\b/d\bdx\bx [\b[o\bop\bpt\bti\bio\bon\bns\bs]\b] interrogate the spot database
-
-
- If you just type SHOW/DX you will get the last so many spots (sysop
- configurable, but usually 10).
-
- In addition you can add any number of these options in very nearly any
- order to the basic SHOW/DX command, they are:-
-
-
-
-
-
-
-
-
-
-
-
-
-
+ 1\b13\b3.\b.1\b10\b04\b4.\b. s\bsh\bho\bow\bw/\b/d\bde\beb\bbu\bug\bg (\b(9\b9)\b)
+ s\bsh\bho\bow\bw/\b/d\bde\beb\bbu\bug\bg Show what levels of debug you are logging
+ The levels can be set with _\bs_\be_\bt_\b/_\bd_\be_\bb_\bu_\bg
+ 1\b13\b3.\b.1\b10\b05\b5.\b. s\bsh\bho\bow\bw/\b/d\bdx\bx (\b(0\b0)\b)
+ s\bsh\bho\bow\bw/\b/d\bdx\bx [\b[o\bop\bpt\bti\bio\bon\bns\bs]\b] interrogate the spot database
+ If you just type SHOW/DX you will get the last so many spots (sysop
+ configurable, but usually 10).
+ In addition you can add any number of these options in very nearly any
+ order to the basic SHOW/DX command, they are:-
- 1\b13\b3.\b.1\b10\b05\b5.\b. s\bsh\bho\bow\bw/\b/d\bdx\bxc\bcc\bc (\b(0\b0)\b)
+ 1\b13\b3.\b.1\b10\b06\b6.\b. s\bsh\bho\bow\bw/\b/d\bdx\bxc\bcc\bc (\b(0\b0)\b)
s
\bsh
\bho
\bow
\bw/
\b/d
\bdx
\bxc
\bcc
\bc <
\b<p
\bpr
\bre
\bef
\bfi
\bix
\bx>
\b> Interrogate the spot database by country
- 1\b13\b3.\b.1\b10\b06\b6.\b. s\bsh\bho\bow\bw/\b/f\bfi\bil\ble\bes\bs (\b(0\b0)\b)
+ 1\b13\b3.\b.1\b10\b07\b7.\b. s\bsh\bho\bow\bw/\b/f\bfi\bil\ble\bes\bs (\b(0\b0)\b)
s\bsh\bho\bow\bw/\b/f\bfi\bil\ble\bes\bs [\b[<\b<f\bfi\bil\ble\bea\bar\bre\bea\ba>\b> [\b[<\b<s\bst\btr\bri\bin\bng\bg>\b>]\b]]\b] List the contents of a filearea
See also TYPE - to see the contents of a file.
- 1\b13\b3.\b.1\b10\b07\b7.\b. s\bsh\bho\bow\bw/\b/f\bfi\bil\blt\bte\ber\br (\b(0\b0)\b)
+ 1\b13\b3.\b.1\b10\b08\b8.\b. s\bsh\bho\bow\bw/\b/f\bfi\bil\blt\bte\ber\br (\b(0\b0)\b)
s\bsh\bho\bow\bw/\b/f\bfi\bil\blt\bte\ber\br Show the filters you have set
displays all the filters set - for all the various categories.
- 1\b13\b3.\b.1\b10\b08\b8.\b. s\bsh\bho\bow\bw/\b/f\bfi\bil\blt\bte\ber\br (\b(e\bex\bxt\bte\ben\bnd\bde\bed\bd f\bfo\bor\br s\bsy\bys\bso\bop\bps\bs)\b) (\b(5\b5)\b)
+ 1\b13\b3.\b.1\b10\b09\b9.\b. s\bsh\bho\bow\bw/\b/f\bfi\bil\blt\bte\ber\br (\b(e\bex\bxt\bte\ben\bnd\bde\bed\bd f\bfo\bor\br s\bsy\bys\bso\bop\bps\bs)\b) (\b(5\b5)\b)
s\bsh\bho\bow\bw/\b/f\bfi\bil\blt\bte\ber\br <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b> Show the filters set by <callsign>
A sysop can look at any filters that have been set.
- 1\b13\b3.\b.1\b10\b09\b9.\b. s\bsh\bho\bow\bw/\b/h\bho\bop\bps\bs (\b(8\b8)\b)
+ 1\b13\b3.\b.1\b11\b10\b0.\b. s\bsh\bho\bow\bw/\b/h\bho\bop\bps\bs (\b(8\b8)\b)
s\bsh\bho\bow\bw/\b/h\bho\bop\bps\bs <\b<n\bno\bod\bde\be_\b_c\bca\bal\bll\bl>\b> [\b[a\ban\bnn\bn|\b|s\bsp\bpo\bot\bts\bs|\b|w\bwc\bcy\by|\b|w\bww\bwv\bv|\b|]\b] Show the hop counts for a
node
which category you want to see. If you leave the category out then all
the categories will be listed.
- 1\b13\b3.\b.1\b11\b10\b0.\b. s\bsh\bho\bow\bw/\b/i\bis\bso\bol\bla\bat\bte\be (\b(1\b1)\b)
+ 1\b13\b3.\b.1\b11\b11\b1.\b. s\bsh\bho\bow\bw/\b/i\bis\bso\bol\bla\bat\bte\be (\b(1\b1)\b)
s\bsh\bho\bow\bw/\b/i\bis\bso\bol\bla\bat\bte\be Show a list of isolated nodes
Show which nodes are currently set to be isolated.
- 1\b13\b3.\b.1\b11\b11\b1.\b. s\bsh\bho\bow\bw/\b/l\blo\boc\bck\bko\bou\but\bt (\b(9\b9)\b)
+ 1\b13\b3.\b.1\b11\b12\b2.\b. s\bsh\bho\bow\bw/\b/l\blo\boc\bck\bko\bou\but\bt (\b(9\b9)\b)
s\bsh\bho\bow\bw/\b/l\blo\boc\bck\bko\bou\but\bt Show a list of excluded callsigns
cluster locally with the _\bs_\be_\bt_\b/_\bl_\bo_\bc_\bk_\bo_\bu_\bt command
- 1\b13\b3.\b.1\b11\b12\b2.\b. s\bsh\bho\bow\bw/\b/l\blo\bog\bg (\b(8\b8)\b)
+ 1\b13\b3.\b.1\b11\b13\b3.\b. s\bsh\bho\bow\bw/\b/l\blo\bog\bg (\b(8\b8)\b)
s\bsh\bho\bow\bw/\b/l\blo\bog\bg [\b[<\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b>]\b] Show excerpts from the system log
show output from the log associated with that callsign.
- 1\b13\b3.\b.1\b11\b13\b3.\b. s\bsh\bho\bow\bw/\b/m\bmo\boo\bon\bn (\b(0\b0)\b)
+ 1\b13\b3.\b.1\b11\b14\b4.\b. s\bsh\bho\bow\bw/\b/m\bmo\boo\bon\bn (\b(0\b0)\b)
s
\bsh
\bho
\bow
\bw/
\b/m
\bmo
\boo
\bon
\bn [
\b[<
\b<p
\bpr
\bre
\bef
\bfi
\bix
\bx>
\b>|
\b|<
\b<c
\bca
\bal
\bll
\bls
\bsi
\big
\bgn
\bn>
\b>]
\b] Show moon rise and set times
- 1\b13\b3.\b.1\b11\b14\b4.\b. s\bsh\bho\bow\bw/\b/m\bmu\buf\bf (\b(0\b0)\b)
+ 1\b13\b3.\b.1\b11\b15\b5.\b. s\bsh\bho\bow\bw/\b/m\bmu\buf\bf (\b(0\b0)\b)
s
\bsh
\bho
\bow
\bw/
\b/m
\bmu
\buf
\bf <
\b<p
\bpr
\bre
\bef
\bfi
\bix
\bx>
\b> [
\b[<
\b<h
\bho
\bou
\bur
\brs
\bs>
\b>]
\b][
\b[l
\blo
\bon
\bng
\bg]
\b] Show the likely propagation to
<prefix>
terrible accurate, but it is included for completeness.
- 1\b13\b3.\b.1\b11\b15\b5.\b. s\bsh\bho\bow\bw/\b/n\bno\bod\bde\be (\b(1\b1)\b)
+ 1\b13\b3.\b.1\b11\b16\b6.\b. s\bsh\bho\bow\bw/\b/n\bno\bod\bde\be (\b(1\b1)\b)
s\bsh\bho\bow\bw/\b/n\bno\bod\bde\be [\b[<\b<n\bno\bod\bde\be_\b_c\bca\bal\bll\bl>\b> .\b..\b..\b.]\b] Show the type and version number of nodes
the non-user callsigns known to the system will be displayed.
- 1\b13\b3.\b.1\b11\b16\b6.\b. s\bsh\bho\bow\bw/\b/p\bpr\bre\bef\bfi\bix\bx (\b(0\b0)\b)
+ 1\b13\b3.\b.1\b11\b17\b7.\b. s\bsh\bho\bow\bw/\b/p\bpr\bre\bef\bfi\bix\bx (\b(0\b0)\b)
s\bsh\bho\bow\bw/\b/p\bpr\bre\bef\bfi\bix\bx <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b> Interrogate the prefix database
- 1\b13\b3.\b.1\b11\b17\b7.\b. s\bsh\bho\bow\bw/\b/p\bpr\bro\bog\bgr\bra\bam\bm (\b(5\b5)\b)
+ 1\b13\b3.\b.1\b11\b18\b8.\b. s\bsh\bho\bow\bw/\b/p\bpr\bro\bog\bgr\bra\bam\bm (\b(5\b5)\b)
s\bsh\bho\bow\bw/\b/p\bpr\bro\bog\bgr\bra\bam\bm Show the locations of all the included program modules
from.
- 1\b13\b3.\b.1\b11\b18\b8.\b. s\bsh\bho\bow\bw/\b/q\bqr\bra\ba (\b(0\b0)\b)
+ 1\b13\b3.\b.1\b11\b19\b9.\b. s\bsh\bho\bow\bw/\b/q\bqr\bra\ba (\b(0\b0)\b)
s\bsh\bho\bow\bw/\b/q\bqr\bra\ba <\b<l\blo\boc\bca\bat\bto\bor\br>\b> [\b[<\b<l\blo\boc\bca\bat\bto\bor\br>\b>]\b] Show the distance between locators
s\bsh\bho\bow\bw/\b/q\bqr\bra\ba <\b<l\bla\bat\bt>\b> <\b<l\blo\bon\bng\bg>\b> Convert latitude and longitude to a locator
- 1\b13\b3.\b.1\b11\b19\b9.\b. s\bsh\bho\bow\bw/\b/q\bqr\brz\bz (\b(0\b0)\b)
+ 1\b13\b3.\b.1\b12\b20\b0.\b. s\bsh\bho\bow\bw/\b/q\bqr\brz\bz (\b(0\b0)\b)
s\bsh\bho\bow\bw/\b/q\bqr\brz\bz <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b> Show any callbook details on a callsign
provided for users of this software by http://www.qrz.com
- 1\b13\b3.\b.1\b12\b20\b0.\b. s\bsh\bho\bow\bw/\b/r\bro\bou\but\bte\be (\b(0\b0)\b)
+ 1\b13\b3.\b.1\b12\b21\b1.\b. s\bsh\bho\bow\bw/\b/r\bro\bou\but\bte\be (\b(0\b0)\b)
s\bsh\bho\bow\bw/\b/r\bro\bou\but\bte\be <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b> Show the route to <callsign>
- 1\b13\b3.\b.1\b12\b21\b1.\b. s\bsh\bho\bow\bw/\b/s\bsa\bat\bte\bel\bll\bli\bit\bte\be (\b(0\b0)\b)
+ 1\b13\b3.\b.1\b12\b22\b2.\b. s\bsh\bho\bow\bw/\b/s\bsa\bat\bte\bel\bll\bli\bit\bte\be (\b(0\b0)\b)
s\bsh\bho\bow\bw/\b/s\bsa\bat\bte\bel\bll\bli\bit\bte\be <\b<n\bna\bam\bme\be>\b> [\b[<\b<h\bho\bou\bur\brs\bs>\b> <\b<i\bin\bnt\bte\ber\brv\bva\bal\bl>\b>]\b] Show satellite tracking
data
- 1\b13\b3.\b.1\b12\b22\b2.\b. s\bsh\bho\bow\bw/\b/s\bsu\bun\bn (\b(0\b0)\b)
+ 1\b13\b3.\b.1\b12\b23\b3.\b. s\bsh\bho\bow\bw/\b/s\bsu\bun\bn (\b(0\b0)\b)
s
\bsh
\bho
\bow
\bw/
\b/s
\bsu
\bun
\bn [
\b[<
\b<p
\bpr
\bre
\bef
\bfi
\bix
\bx>
\b>|
\b|<
\b<c
\bca
\bal
\bll
\bls
\bsi
\big
\bgn
\bn>
\b>]
\b] Show sun rise and set times
- 1\b13\b3.\b.1\b12\b23\b3.\b. s\bsh\bho\bow\bw/\b/t\bti\bim\bme\be (\b(0\b0)\b)
+ 1\b13\b3.\b.1\b12\b24\b4.\b. s\bsh\bho\bow\bw/\b/t\bti\bim\bme\be (\b(0\b0)\b)
s
\bsh
\bho
\bow
\bw/
\b/t
\bti
\bim
\bme
\be [
\b[<
\b<p
\bpr
\bre
\bef
\bfi
\bix
\bx>
\b>|
\b|<
\b<c
\bca
\bal
\bll
\bls
\bsi
\big
\bgn
\bn>
\b>]
\b] Show the local time
including DST) at the prefixes or callsigns that you specify.
- 1\b13\b3.\b.1\b12\b24\b4.\b. s\bsh\bho\bow\bw/\b/w\bwc\bcy\by (\b(0\b0)\b)
+ 1\b13\b3.\b.1\b12\b25\b5.\b. s\bsh\bho\bow\bw/\b/w\bwc\bcy\by (\b(0\b0)\b)
s\bsh\bho\bow\bw/\b/w\bwc\bcy\by Show the last 10 WCY broadcasts
s\bsh\bho\bow\bw/\b/w\bwc\bcy\by <\b<n\bn>\b> Show the last <n> WCY broadcasts
system
- 1\b13\b3.\b.1\b12\b25\b5.\b. s\bsh\bho\bow\bw/\b/w\bww\bwv\bv (\b(0\b0)\b)
+ 1\b13\b3.\b.1\b12\b26\b6.\b. s\bsh\bho\bow\bw/\b/w\bww\bwv\bv (\b(0\b0)\b)
s\bsh\bho\bow\bw/\b/w\bww\bwv\bv Show the last 10 WWV broadcasts
s\bsh\bho\bow\bw/\b/w\bww\bwv\bv <\b<n\bn>\b> Show the last <n> WWV broadcasts
- 1\b13\b3.\b.1\b12\b26\b6.\b. s\bsh\bhu\but\btd\bdo\bow\bwn\bn (\b(5\b5)\b)
+ 1\b13\b3.\b.1\b12\b27\b7.\b. s\bsh\bhu\but\btd\bdo\bow\bwn\bn (\b(5\b5)\b)
s\bsh\bhu\but\btd\bdo\bow\bwn\bn Shutdown the cluster
set to respawn in /etc/inittab it will of course restart.
- 1\b13\b3.\b.1\b12\b27\b7.\b. s\bsp\bpo\boo\bof\bf (\b(9\b9)\b)
+ 1\b13\b3.\b.1\b12\b28\b8.\b. s\bsp\bpo\boo\bof\bf (\b(9\b9)\b)
s\bsp\bpo\boo\bof\bf <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b> <\b<c\bco\bom\bmm\bma\ban\bnd\bd>\b> Run commands as another user
like home_node for example.
- 1\b13\b3.\b.1\b12\b28\b8.\b. s\bst\bta\bat\bt/\b/d\bdb\bb (\b(5\b5)\b)
+ 1\b13\b3.\b.1\b12\b29\b9.\b. s\bst\bta\bat\bt/\b/d\bdb\bb (\b(5\b5)\b)
s\bst\bta\bat\bt/\b/d\bdb\bb <\b<d\bdb\bbn\bna\bam\bme\be>\b> Show the status of a database
other than a sysop.
- 1\b13\b3.\b.1\b12\b29\b9.\b. s\bst\bta\bat\bt/\b/c\bch\bha\ban\bnn\bne\bel\bl (\b(5\b5)\b)
+ 1\b13\b3.\b.1\b13\b30\b0.\b. s\bst\bta\bat\bt/\b/c\bch\bha\ban\bnn\bne\bel\bl (\b(5\b5)\b)
s\bst\bta\bat\bt/\b/c\bch\bha\ban\bnn\bne\bel\bl <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b> Show the status of a channel on the cluster
Only the fields that are defined (in perl term) will be displayed.
- 1\b13\b3.\b.1\b13\b30\b0.\b. s\bst\bta\bat\bt/\b/m\bms\bsg\bg (\b(5\b5)\b)
+ 1\b13\b3.\b.1\b13\b31\b1.\b. s\bst\bta\bat\bt/\b/m\bms\bsg\bg (\b(5\b5)\b)
s\bst\bta\bat\bt/\b/m\bms\bsg\bg <\b<m\bms\bsg\bgn\bno\bo>\b> Show the status of a message
etc etc.
- 1\b13\b3.\b.1\b13\b31\b1.\b. s\bst\bta\bat\bt/\b/u\bus\bse\ber\br (\b(5\b5)\b)
+ 1\b13\b3.\b.1\b13\b32\b2.\b. s\bst\bta\bat\bt/\b/u\bus\bse\ber\br (\b(5\b5)\b)
s\bst\bta\bat\bt/\b/u\bus\bse\ber\br <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b> Show the full status of a user
Only the fields that are defined (in perl term) will be displayed.
- 1\b13\b3.\b.1\b13\b32\b2.\b. s\bsy\bys\bso\bop\bp (\b(0\b0)\b)
+ 1\b13\b3.\b.1\b13\b33\b3.\b. s\bsy\bys\bso\bop\bp (\b(0\b0)\b)
s\bsy\bys\bso\bop\bp Regain your privileges if you login remotely
case sensitive.
- 1\b13\b3.\b.1\b13\b33\b3.\b. t\bta\bal\blk\bk (\b(0\b0)\b)
+ 1\b13\b3.\b.1\b13\b34\b4.\b. t\bta\bal\blk\bk (\b(0\b0)\b)
t\bta\bal\blk\bk <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b> Enter talk mode with <callsign>
t\bta\bal\blk\bk <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b> <\b<t\bte\bex\bxt\bt>\b> Send a text message to <callsign>
- 1\b13\b3.\b.1\b13\b34\b4.\b. t\bty\byp\bpe\be (\b(0\b0)\b)
+ 1\b13\b3.\b.1\b13\b35\b5.\b. t\bty\byp\bpe\be (\b(0\b0)\b)
t\bty\byp\bpe\be <\b<f\bfi\bil\ble\bea\bar\bre\bea\ba>\b>/\b/<\b<n\bna\bam\bme\be>\b> Look at a file in one of the fileareas
content.
- 1\b13\b3.\b.1\b13\b35\b5.\b. w\bwh\bho\bo (\b(0\b0)\b)
+ 1\b13\b3.\b.1\b13\b36\b6.\b. w\bwh\bho\bo (\b(0\b0)\b)
w\bwh\bho\bo Show who is physically connected locally
what sort of connection they have
- 1\b13\b3.\b.1\b13\b36\b6.\b. w\bwx\bx (\b(0\b0)\b)
+ 1\b13\b3.\b.1\b13\b37\b7.\b. w\bwx\bx (\b(0\b0)\b)
w\bwx\bx <\b<t\bte\bex\bxt\bt>\b> Send a weather message to local users
w\bwx\bx f\bfu\bul\bll\bl <\b<t\bte\bex\bxt\bt>\b> Send a weather message to all cluster users
extreme that may indicate enhanced conditions
- 1\b13\b3.\b.1\b13\b37\b7.\b. w\bwx\bx (\b(e\ben\bnh\bha\ban\bnc\bce\bed\bd f\bfo\bor\br s\bsy\bys\bso\bop\bps\bs)\b) (\b(5\b5)\b)
+ 1\b13\b3.\b.1\b13\b38\b8.\b. w\bwx\bx (\b(e\ben\bnh\bha\ban\bnc\bce\bed\bd f\bfo\bor\br s\bsy\bys\bso\bop\bps\bs)\b) (\b(5\b5)\b)
w\bwx\bx s\bsy\bys\bso\bop\bp <\b<t\bte\bex\bxt\bt>\b> Send a weather message to other clusters only
projects / spider.git / blobdiff