X-Git-Url: http://dxcluster.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=cmd%2FCommands_en.hlp;h=a9e0e9f2ac9e50b01aa9bc547d4b08136a775d19;hb=6aca4e461103870de99b0ce452f21cf7fedeb54b;hp=aee33924df02508b312054d62cd768dfaf23e387;hpb=b4826d1f4125788e14fed3adbb99e66242904e74;p=spider.git diff --git a/cmd/Commands_en.hlp b/cmd/Commands_en.hlp index aee33924..a9e0e9f2 100644 --- a/cmd/Commands_en.hlp +++ b/cmd/Commands_en.hlp @@ -63,6 +63,11 @@ Disconnect any connected locally is compared against the available bands set up in the cluster. see show/bands for more information. +=== 1^FORWARD/OPERNAME ^Send out information on this to all clusters +This command sends out any information held in the user file which can +be broadcast in PC41 protocol packets. This information is Name, QTH, Location +and Homenode. PC41s are only sent for the information that is available. + === 0^HELP^The HELP Command HELP is available for a number of commands. The syntax is:- @@ -76,35 +81,56 @@ to SH/DX, ANNOUNCE can be shortened to AN and so on. Look at the APROPOS command which will search the help database for the you specify and give you a list of likely commands to look at with HELP. -=== 0^SHOW/DX^Interrogate the spot database -If you just type SHOW/DX you will get the last so many spots -(sysop configurable, but usually 10). - -In addition you can add any number of these commands in very nearly -any order to the basic SHOW/DX command, they are:- - -on - eg 160m 20m 2m 23cm 6mm -on - eg hf vhf uhf shf (see SHOW/BANDS) - - - the number of spots you want -- - spot no spot no in the selected list - - - for a spotted callsign beginning with -* - for a spotted callsign ending in -** - for a spotted callsign containing - -day - starting days ago -day - - days days ago - -info - any spots containing in the info or remarks - -spotter - any spots spotted by - -e.g. - - SH/DX 9m0 - SH/DX on 20m info iota - SH/DX 9a on vhf day 30 + +=== 0^KILL [ [ ^Send text (eg PC Protocol) to +Send some arbitrary text to a locally connected callsign. No processing is done on +the text. This command allows you to send PC Protocol to unstick things if problems +arise (messages get stuck etc). eg:- + pc gb7djk PC33^GB7TLH^GB7DJK^400^ +or + pc G1TLH Try doing that properly!!! + +=== 1^PING ^Send a ping command to another cluster +This command is used to estimate the quality of the link to another cluster. +The time returned is the length of time taken for a PC51 to go to another +cluster and be returned. === 0^KILL [ ...]^Remove or erase a message from the system You can get rid of any message to or originating from your callsign using @@ -113,6 +139,22 @@ this command. You can remove more than one message at a time. === 5^KILL-^ As a sysop you can kill any message on the system. +=== 5^MERGE [/]^Ask for the latest spots and WWV +MERGE allows you to bring your spot and wwv database up to date. By default +it will request the last 10 spots and 5 WWVs from the node you select. The +node must be connected locally. + +You can request any number of spots or wwv and although they will be appended +to your databases they will not duplicate any that have recently been added +(the last 2 days for spots and last month for WWV data). + +=== 8^PC ^Send arbitrary text to a connected callsign +Send any text you like to the callsign requested. This is used mainly to send +PC protocol to connected nodes either for testing or to unstick things. + +You can also use in the same way as a talk command to a connected user but +without any processing, added of "from to ^Find out the delays an a circuit to another node This command will enable sysops to determine the speed of an inter-cluster node. @@ -168,8 +210,138 @@ You can have multiple qualifiers so that you can have for example:- which should send a copy of message 123 to G1TLH and G0RDI and you will receive a read receipt when they have read the message. -SB is an alias for SEND NOPRIVATE +SB is an alias for SEND NOPRIVATE (or send a bulletin in BBS speak) SP is an alias for SEND PRIVATE + +=== 0^SET/ADDRESS ^Record your postal address + +=== 0^SET/ANNOUNCE^Allow announce messages to come out on your terminal +=== 0^UNSET/ANNOUNCE^Stop announce messages coming out on your terminal + +=== 0^SET/BEEP^Add a beep to DX and other messages on your terminal +=== 0^UNSET/BEEP^Stop beeps for DX and other messages on your terminal + +=== 9^SET/DEBUG ^Add a debug level to the debug set +=== 9^UNSET/DEBUG ^Remove a debug level from the debug set + +=== 0^SET/DX^Allow DX messages to come out on your terminal +=== 0^UNSET/DX^Stop DX messages coming out on your terminal + +=== 0^SET/HERE^Tell the system you are present at your terminal +=== 0^UNSET/HERE^Tell the system you are absent from your terminal + +=== 0^SET/HOMENODE ^Set your normal cluster callsign +Tell the cluster system where you normally connect to. Any Messages sent +to you will normally find their way there should you not be connected. +eg:- + SET/HOMENODE gb7djk + +=== 9^SET/ISOLATE^Isolate a node from the rest of the network +Connect a node to your system in such a way that you are a full protocol +member of its network and can see all spots on it, but nothing either leaks +out from it nor goes back into from the rest of the nodes connected to you. + +You can potentially connect several nodes in this way. + +=== 9^UNSET/ISOLATE^Stop Isolation of a node from the rest of the network +Remove isolation from a node - SET/ISOLATE + +=== 0^SET/LANGUAGE ^Set the language you want to use +You can select the language that you want the cluster to use. Currently +the languages available are en (english) and nl (dutch). + +=== 0^SET/LOCATION ^Set your latitude and longitude +=== 9^SET/SYS_LOCATION ^Set your cluster latitude and longitude +In order to get accurate headings and such like you must tell the system +what your latitude and longitude is. If you have not yet done a SET/QRA +then this command will set your QRA locator for you. For example:- + SET/LOCATION 52 22 N 0 57 E + +=== 9^SET/LOCKOUT ^Stop a callsign connecting to the cluster +=== 9^UNSET/LOCKOUT ^Allow a callsign to connect to the cluster + +=== 0^SET/NAME ^Set your name +Tell the system what your name is eg:- + SET/NAME Dirk + +=== 9^SET/NODE [..]^Make the callsign an AK1A cluster +Tell the system that the call(s) are to be treated as AK1A cluster and +fed PC Protocol rather normal user commands. + +=== 0^SET/PAGE ^Set the lines per page +Tell the system how many lines you wish on a page when the number of line +of output from a command is more than this. The default is 20. Setting it +explicitly to 0 will disable paging. + SET/PAGE 30 + SET/PAGE 0 + +=== 9^SET/PRIVILEGE [ ^Set a users password +The password for a user can only be set by a full sysop. The string can contain +any characters but any spaces are removed (you can type in spaces - but they +won't appear in the password). You can see the result with STAT/USER. + +=== 0^SET/QRA ^Set your QRA locator +=== 9^SET/SYS_QRA ^Set your cluster QRA locator +Tell the system what your QRA (or Maidenhead) locator is. If you have not +done a SET/LOCATION then your latitude and longitude will be set roughly +correctly (assuming your locator is correct ;-). For example:- + SET/QRA JO02LQ + +=== 0^SET/QTH ^Set your QTH +Tell the system where you are. For example:- + SET/QTH East Dereham, Norfolk + +=== 0^SET/TALK^Allow TALK messages to come out on your terminal +=== 0^UNSET/TALK^Stop TALK messages coming out on your terminal + +=== 0^SET/WWV^Allow WWV messages to come out on your terminal +=== 0^UNSET/WWV^Stop WWV messages coming out on your terminal + +=== 0^SET/WX^Allow WX messages to come out on your terminal +=== 0^UNSET/WX^Stop WX messages coming out on your terminal + +=== 0^SHOW/DX^Interrogate the spot database +If you just type SHOW/DX you will get the last so many spots +(sysop configurable, but usually 10). + +In addition you can add any number of these commands in very nearly +any order to the basic SHOW/DX command, they are:- + +on - eg 160m 20m 2m 23cm 6mm +on - eg hf vhf uhf shf (see SHOW/BANDS) + + - the number of spots you want +- - spot no spot no in the selected list + + - for a spotted callsign beginning with +* - for a spotted callsign ending in +** - for a spotted callsign containing + +day - starting days ago +day - - days days ago + +info - any spots containing in the info or remarks + +spotter - any spots spotted by + +e.g. + + SH/DX 9m0 + SH/DX on 20m info iota + SH/DX 9a on vhf day 30 === 0^SHOW/DXCC ^Interrogate the spot database by country This command takes the (which can be a full or partial @@ -190,9 +362,51 @@ together with the internal country no, the CQ and ITU regions. See also SHOW/DXCC +=== 0^SHOW/PROGRAM^Show the locations of all the included program modules +Show the name and location where every program module was load from. This +is useful for checking where you think you have loaded a .pm file from. + +=== 0^SHOW/WWV^Show last 10 WWV broadcasts +=== 0^SHOW/WWV ^Show last WWV broadcasts +Display the most recent WWV information that has been received by the system + === 5^SHUTDOWN^Shutdown the cluster Shutdown the cluster and disconnect all the users +=== 5^STAT/CHANNEL []^Show the status of a channel on the cluster +Show the internal status of the channel object either for the channel that +you are on or else for the callsign that you asked for. + +Only the fields that are defined (in perl term) will be displayed. + +=== 5^STAT/USER []^Show the full status of a user +Shows the full contents of a user record including all the secret flags +and stuff. + +Only the fields that are defined (in perl term) will be displayed. + +=== 0^SYSOP^Regain your privileges if you login remotely +The system automatically reduces your privilege level to that of a normal user +if you login in remotely. This command allows you to regain your normal privilege +level. It uses the normal system: five numbers are returned that are indexes into +the character array that is your assigned password (see set/password). The indexes +start from zero. + +You are expected to return a string which contains the characters required in the +correct order. You may intersperse those characters with others to obscure your +reply for any watchers. For example (and these values are for explanation :-): + +password = 012345678901234567890123456789 + > sysop +22 10 15 17 3 +you type:- +aa2bbbb0ccc5ddd7xxx3n +or 2 0 5 7 3 +or 20573 + +They will all match. If there is no password you will still be offered numbers but +nothing will happen when you input a string. Any match is case sensitive. + === 0^TALK ^Send a text message to another station === 0^TALK > ^Send a text message to another station via a node Send a short message to any other station that is visible on the cluster @@ -201,9 +415,9 @@ command, they don't have to be connected locally. The second form of TALK is used when other cluster nodes are connected with restricted information. This usually means that they don't send -the user information usually associated with loging on and off the cluster. +the user information usually associated with logging on and off the cluster. -If you know that G3JNB is likly to be present on GB7TLH, but you can only +If you know that G3JNB is likely to be present on GB7TLH, but you can only see GB7TLH in the SH/C list but with no users, then you would use the second form of the talk message.