X-Git-Url: http://dxcluster.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=html%2Fadminmanual-11.html;h=939c8a1a6cb0b1321d6ef3412d8c7ce7c6ca7cef;hb=3915e73f468fbcce9b7ee8a18e5bea6f605e216e;hp=75840549f466323591fa11d27b7a7b76c05aa6d0;hpb=ad10d0e662650f1ac03895d5c9143e204764ef53;p=spider.git diff --git a/html/adminmanual-11.html b/html/adminmanual-11.html index 75840549..939c8a1a 100644 --- a/html/adminmanual-11.html +++ b/html/adminmanual-11.html @@ -1,348 +1,2808 @@
- -Below is a complete list of commands available from the cluster prompt. +Most maintenance tasks are automatic but there are some commands that are useful +for a sysop. These are listed below in alphabetical order. The number in +brackets following the command name is the permissions level needed to use +the command
+ +accept/announce [0-9] <pattern> Set an accept filter
+line for announce
Create an 'accept this announce' line for a filter.
+An accept filter line means that if the announce matches this filter it is +passed onto the user. See HELP FILTERS for more info. Please read this +to understand how filters work - it will save a lot of grief later on.
+You can use any of the following things in this line:-
++
+
+ info <string> eg: iota or qsl
+ by <prefixes> eg: G,M,2
+ origin <prefixes>
+ origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <numbers>
+ origin_zone <numbers>
+ by_dxcc <numbers>
+ by_itu <numbers>
+ by_zone <numbers>
+ channel <prefixes>
+ wx 1 filter WX announces
+ dest <prefixes> eg: 6MUK,WDX (distros)
+
+
+
+some examples:-
++
+
+ acc/ann dest 6MUK
+ acc/ann 2 by_zone 14,15,16
+ (this could be all on one line: acc/ann dest 6MUK or by_zone 14,15,16)
+
+
+
+or
++
+
+ acc/ann by G,M,2
+
+
+
+This filter would only allow announces that were posted buy UK stations. +You can use the tag 'all' to accept everything eg:
++
+
+ acc/ann all
+
+
+
+but this probably for advanced users...
+ +accept/announce <call> [input] [0-9]<pattern> Announce filter sysop version
This version allows a sysop to set a filter for a callsign as well as the +default for nodes and users eg:-
++
+
+ accept/ann by G,M,2
+ accept/ann input node_default by G,M,2
+ accept/ann user_default by G,M,2
+
+
+
+
+accept/route <call> [0-9] <pattern> Set an 'accept' filter line for routing
Create an 'accept this routing PC Protocol' line for a filter.
+ +An accept filter line means that if a PC16/17/19/21/24/41/50 matches this filter +it is passed thru that interface. See HELP FILTERING for more info. Please read this +to understand how filters work - it will save a lot of grief later on.
+ +You can use any of the following things in this line:-
++
+
+ call <prefixes> the callsign of the thingy
+ call_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ call_itu <numbers>
+ call_zone <numbers>
+ origin <prefixes> really the interface it came in on
+ origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <numbers>
+ origin_zone <numbers>
+
+
+
+
+some examples:-
++
+
+ acc/route gb7djk call_dxcc 61,38 (send only UK+EIRE nodes)
+ acc/route gb7djk call gb7djk (equiv to SET/ISOLATE)
+
+
+
+
+You can use the tag 'all' to accept everything eg:
++
+
+ acc/route all
+
+
+
+
+accept/spots [0-9] <pattern> Set an accept filter line for spots
Create an 'accept this spot' line for a filter.
+ +An accept filter line means that if the spot matches this filter it is +passed onto the user. See HELP FILTERS for more info. Please read this +to understand how filters work - it will save a lot of grief later on.
+Please read the following section carefully. Though it looks similar, +reformatting, corrections, and hopefully clarifications have been added.
+You can use any of the following things in this line:-
++
+
+Filters for the station being spotted:
+ call <letters of the prefix, but NOT country inclusive>
+ call G --> G1AAA, GJ2BBB, GU3CCC, etc will be spotted
+ call K --> K1XX, K1XXX will be spotted
+ W1XX, W1XXX will NOT be spotted
+ call PA --> PA3EZL will be spotted
+ PB2FG will NOT be spotted
+
+ call_dxcc <numbers or prefixes>
+ call_dxcc G --> G1AAA will be spotted
+ GU1AAA will NOT be spotted (different country)
+ call_dxcc K --> K1XX, W1XX will be spotted (same country)
+ call_dxcc 139 --> PA3EZL and PB2FG will be spotted
+
+ call_itu <numbers>
+ call_zone <numbers>
+
+Filters for the callsign of the station doing the spotting:
+ by <letters of the prefix, but NOT country inclusive>
+ by G --> spots from G1AAA, GJ2BBB, GU3CCC, etc will be spotted
+ by K --> spots from K1XX, K1XXX will be spotted
+ spots from W1XX, W1XXX will NOT be spotted
+
+ by_dxcc <numbers or prefixes>
+ by_dxcc G --> spots from G1AAA will be spotted
+ spots from GU1AAA will NOT be spotted (different
+country)
+ by_dxcc K --> spots from K1XX, W1XX will be spotted (same country)
+ by_dxcc 139 --> spots from PA3EZL or PB2FG will be spotted
+
+ by_itu <numbers>
+ by_zone <numbers>
+
+Filters for the callsign of the "node" doing the spotting:
+ origin <letters of the prefix, but NOT country inclusive>
+ origin K --> spots from a node starting with K will be spotted
+ spots from a node starting with KK will NOT be spotted
+ spots from a node starting with W will NOT be spotted
+
+Filters for the callsign of the connected node or user (channel) doing the spotting:
+ channel <prefixes>
+ channel W1HR --> spots from the connected node W1HR will be spotted
+ channel K1QX --> spots from the connected user K1QX will be spotted
+
+ info <string> eg: iota or qsl
+ freq <range> eg: 0/30000 or hf or hf/cw or 6m,4m,2m
+ on <range> same as 'freq'
+
+
+
+
+For frequencies, you can use any of the band names defined in +SHOW/BANDS and you can use a subband name like: cw, rtty, data, ssb - +thus: hf/ssb. You can also just have a simple range like: 0/30000 - +this is more efficient than saying simply: freq HF (but don't get +too hung up about that)
+some examples:-
++
+
+ acc/spot 1 on hf/cw
+ acc/spot 2 on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
+
+
+
+You can use the tag 'all' to accept everything, eg:
++
+
+ acc/spot 3 all
+
+
+
+but this probably for advanced users...
+ +accept/spots <call> [input] [0-9] <pattern> Spot filter sysop version
This version allows a sysop to set a filter for a callsign as well as the +default for nodes and users eg:-
++
+
+ accept/spot db0sue-7 1 by_zone 14,15,16
+ accept/spot node_default all
+ set/hops node_default 10
+
+ accept/spot user_default by G,M,2
+
+
+
+
+accept/wcy [0-9] <pattern> set an accept WCY filter
It is unlikely that you will want to do this, but if you do then you can +filter on the following fields:-
++
+
+ by <prefixes> eg: G,M,2
+ origin <prefixes>
+ origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <numbers>
+ origin_zone <numbers>
+ by_dxcc <numbers>
+ by_itu <numbers>
+ by_zone <numbers>
+ channel <prefixes>
+
+
+
+
+There are no examples because WCY Broadcasts only come from one place and +you either want them or not (see UNSET/WCY if you don't want them).
+This command is really provided for future use.
+See HELP FILTER for information.
+ +accept/wcy <call> [input] [0-9] <pattern>
+WCY filter sysop version
This version allows a sysop to set a filter for a callsign as well as the +default for nodes and users eg:-
++
+
+ accept/wcy node_default all
+ set/hops node_default 10
+
+
+
+
+accept/wwv [0-9] <pattern> Set an accept WWV filter
It is unlikely that you will want to do this, but if you do then you can +filter on the following fields:-
++
+
+ by <prefixes> eg: G,M,2
+ origin <prefixes>
+ origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <numbers>
+ origin_zone <numbers>
+ by_dxcc <numbers>
+ by_itu <numbers>
+ by_zone <numbers>
+ channel <prefixes>
+
+
+
+for example
++
+
+ accept/wwv by_zone 4
+
+
+
+is probably the only useful thing to do (which will only show WWV broadcasts +by stations in the US).
+See HELP FILTER for information.
+ +accept/wwv <call> [input] [0-9] <pattern>
+WWV filter sysop version
This version allows a sysop to set a filter for a callsign as well as the +default for nodes and users eg:-
++
+
+ accept/wwv db0sue-7 1 by_zone 4
+ accept/wwv node_default all
+ set/hops node_default 10
+
+ accept/wwv user_default by W,K
+
+
+
+
+announce <text> Send an announcement to local users
Send an announcement to LOCAL users only, where <text> is the text +of the announcement you wish to broadcast. If you do not wish to receive +announces, use the set/noannounce command. Any announces made by +a sysop will override set/noannounce.
+ +announce full <text> Send an announcement cluster wide
This command will send your announcement across the whole cluster +network.
+ + +announce sysop <text>
Send an announcement to Sysops only
+ +apropos <string> Search the help database
Search the help database for <string> (it isn't case sensitive), +and print the names of all the commands that may be relevant.
+ +bye Exit from the cluster
This will disconnect you from the cluster
+ +catchup <node_call> All|[<msgno> ...] Mark a message as sent
When you send messages the fact that you have forwarded it to another node +is remembered so that it isn't sent again. When you have a new partner +node and you add their callsign to your /spider/msg/forward.pl file, all +outstanding non-private messages will be forwarded to them. This may well +be ALL the non-private messages. You can prevent this by using these +commmands:-
++
+
+ catchup GB7DJK all
+ catchup GB7DJK 300 301 302 303 500-510
+
+
+
+and to undo what you have just done:-
++
+
+ uncatchup GB7DJK all
+ uncatchup GB7DJK 300 301 302 303 500-510
+
+
+
+which will arrange for them to be forward candidates again.
+Order is not important.
+ +clear/announce <callsign> [input] [0-9|all] Clear an announce filter line
A sysop can clear an input or normal output filter for a user or the +node_default or user_default.
+ +clear/route <callsign> [input] [0-9|all] Clear a route filter line
This command allows you to clear (remove) a line in a route filter or to +remove the whole filter.
+see CLEAR/SPOTS for a more detailed explanation.
+A sysop can clear an input or normal output filter for a user or the +node_default or user_default.
+ +clear/spots [1|all] Clear a spot filter line
This command allows you to clear (remove) a line in a spot filter or to +remove the whole filter.
+If you have a filter:-
++
+
+ acc/spot 1 on hf/cw
+ acc/spot 2 on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
+
+
+
+and you say:-
++
+
+ clear/spot 1
+
+
+
+you will be left with:-
++
+
+ acc/spot 2 on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
+
+
+
+If you do:
++
+
+ clear/spot all
+
+
+
+the filter will be completely removed.
+ +clear/spots <callsign> [input] [0-9|all] Clear a spot filter line
A sysop can clear an input or normal output filter for a user or the +node_default or user_default.
+ +clear/wcy [1|all] Clear a WCY filter line
This command allows you to clear (remove) a line in a WCY filter or to +remove the whole filter.
+see CLEAR/SPOTS for a more detailed explanation.
+ +clear/wcy <callsign> [input] [0-9|all] Clear a WCY filter line
A sysop can clear an input or normal output filter for a user or the +node_default or user_default.
+ +clear/wwv [1|all] Clear a WWV filter line
This command allows you to clear (remove) a line in a WWV filter or to +remove the whole filter.
+see CLEAR/SPOTS for a more detailed explanation.
+ +clear/wwv <callsign> [input] [0-9|all] Clear a WWV filter line
A sysop can clear an input or normal output filter for a user or the +node_default or user_default.
+ +connect <callsign> Start a connection to another DX Cluster
Start a connection process that will culminate in a new connection to the +DX cluster <callsign>. This process creates a new 'client' process which will +use the script in /spider/connect/<callsign> to effect the 'chat' exchange +necessary to traverse the network(s) to logon to the cluster <callsign>.
+ +dbavail Show a list of all the databases in the system
The title says it all really, this command lists all the databases defined +in the system. It is also aliased to SHOW/COMMAND.
+ +dbcreate <name> Create a database entry
+dbcreate <name> chain <name> [<name>..] Create a chained database entry
+dbcreate <name> remote <node> Create a remote database
+entry
DBCREATE allows you to define a database in the system. It doesn't actually +create anything, just defines it.
+The databases that are created are simple DB_File hash databases, they are +therefore already 'indexed'.
+You can define a local database with the first form of the command eg:
+DBCREATE oblast
+You can also chain databases with the addition of the 'chain' keyword. +This will search each database one after the other. A typical example +is:
+DBCREATE sdx_qsl chain sql_ad
+No checking is done to see if the any of the chained databases exist, in +fact it is usually better to do the above statement first then do each of +the chained databases.
+Databases can exist offsite. To define a database that lives on another +node do:
+DBCREATE buckmaster remote gb7dxc
+Remote databases cannot be chained; however, the last database in a +a chain can be a remote database eg:
+DBCREATE qsl chain gb7dxc
+To see what databases have been defined do:
+DBAVAIL (or it will have been aliased to SHOW/COMMAND)
+It would be normal for you to add an entry into your local Aliases file +to allow people to use the 'SHOW/<dbname>' style syntax. So you would +need to add a line like:-
++
+
+ 's' => [
+ ..
+ ..
+ '^sh\w*/buc', 'dbshow buckmaster', 'dbshow',
+ ..
+ ..
+ ],
+
+
+
+to allow
+SH/BUCK g1tlh
+to work as they may be used to.
+See DBIMPORT for the importing of existing AK1A format data to databases. +See DBSHOW for generic database enquiry
+ +dbimport <dbname> Import AK1A data into a database
If you want to import or update data in bulk to a database you can use +this command. It will either create or update entries into an existing +database. For example:-
+DBIMPORT oblast /tmp/OBLAST.FUL
+will import the standard OBLAST database that comes with AK1A into the +oblast database held locally.
+ +dbremove <dbname> Delete a database
DBREMOVE will completely remove a database entry and also delete any data +file that is associated with it.
+There is no warning, no comeback, no safety net.
+For example:
+DBREMOVE oblast
+will remove the oblast database from the system and it will also remove +the associated datafile.
+I repeat:
+There is no warning, no comeback, no safety net.
+You have been warned.
+ +dbshow <dbname> <key> Display an entry, if it exists, in a database
This is the generic user interface to the database to the database system. +It is expected that the sysop will add an entry to the local Aliases file +so that users can use the more familiar AK1A style of enquiry such as:
++
+
+ SH/BUCK G1TLH
+
+
+
+but if he hasn't and the database really does exist (use DBAVAIL or +SHOW/COMMAND to find out) you can do the same thing with:
++
+
+ DBSHOW buck G1TLH
+
+
+
+
+
+debug Set the cluster program into debug mode
Executing this command will only have an effect if you are running the cluster +in debug mode i.e.
++
+
+ perl -d cluster.pl
+
+
+
+It will interrupt the cluster just after the debug command has finished.
+ +delete/user <callsign> Delete a user from the User Database
This command will completely remove a one or more users from the database.
+There is NO SECOND CHANCE.
+It goes without saying that you should use this command CAREFULLY!
+ +demonstrate <call> <command> Demonstrate a command to another user
This command is provided so that sysops can demonstrate commands to +other users. It runs a command as though that user had typed it in and +then sends the output to that user, together with the command that +caused it.
++
+
+ DEMO g7brn sh/dx iota oc209
+ DEMO g1tlh set/here
+
+
+
+Note that this command is similar to SPOOF and will have the same side +effects. Commands are run at the privilege of the user which is being +demonstrated to.
+ +directory List messages
directory all List all messages
+directory own List your own messages
+directory new List all new messages
+directory to <call> List all messages to <call>
+directory from <call> List all messages from <call>
+directory subject <string> List all messages with <string> in subject
+directory <nn> List last <nn> messages
+directory <from>-<to> List messages <from> message <to> message
List the messages in the messages directory.
+If there is a 'p' one space after the message number then it is a +personal message. If there is a '-' between the message number and the +'p' then this indicates that the message has been read.
+You can use shell escape characters such as '*' and '?' in the <call> +fields.
+You can combine some of the various directory commands together eg:-
++
+
+ DIR TO G1TLH 5
+or
+ DIR SUBJECT IOTA 200-250
+
+
+
+You can abbreviate all the commands to one letter and use ak1a syntax:-
++
+
+ DIR/T G1* 10
+ DIR/S QSL 10-100 5
+
+
+
+
+
+Works just like the user command except that sysops can see ALL messages.
+ +disconnect <call> [<call> ...] Disconnect a user or node
Disconnect any <call> connected locally
+ +dx [by <call>] <freq> <call> <remarks> Send a DX spot
This is how you send a DX Spot to other users. You can, in fact, now +enter the <freq> and the <call> either way round.
++
+
+ DX FR0G 144.600
+ DX 144.600 FR0G
+ DX 144600 FR0G
+
+
+
+will all give the same result. You can add some remarks to the end +of the command and they will be added to the spot.
++
+
+ DX FR0G 144600 this is a test
+
+
+
+You can credit someone else by saying:-
++
+
+ DX by G1TLH FR0G 144.600 he isn't on the cluster
+
+
+
+The <freq> is compared against the available bands set up in the +cluster. See SHOW/BANDS for more information.
+ +export <msgno> <filename> Export a message to a file
Export a message to a file. This command can only be executed on a local +console with a fully privileged user. The file produced will be in a form +ready to be imported back into the cluster by placing it in the import +directory (/spider/msg/import).
+This command cannot overwrite an existing file. This is to provide some +measure of security. Any files written will owned by the same user as the +main cluster, otherwise you can put the new files anywhere the cluster can +access. For example:-
+EXPORT 2345 /tmp/a
+ +export_users [<filename>] Export the users database to ascii
Export the users database to a file in ascii format. If no filename +is given then it will export the file to /spider/data/user_asc.
+If the file already exists it will be renamed to <filename>.o. In fact +up to 5 generations of the file can be kept each one with an extra 'o' on the +suffix.
+BE WARNED: this will write to any file you have write access to. No check is +made on the filename (if any) that you specify.
+ +filtering Filtering things in DXSpider
There are a number of things you can filter in the DXSpider system. They +all use the same general mechanism.
+In general terms you can create a 'reject' or an 'accept' filter which +can have up to 10 lines in it. You do this using, for example:-
+accept/spots ..... +reject/spots .....
+where ..... are the specific commands for that type of filter. There +are filters for spots, wwv, announce, wcy and (for sysops) +connects. See each different accept or reject command reference for +more details.
+There is also a command to clear out one or more lines in a filter and +one to show you what you have set. They are:-
+clear/spots 1 +clear/spots all
+and
+show/filter
+There is clear/xxxx command for each type of filter.
+For now we are going to use spots for the examples, but you can apply +the principles to all types of filter.
+There are two main types of filter 'accept' or 'reject'; which you use +depends entirely on how you look at the world and what is least +writing to achieve what you want. Each filter has 10 lines (of any +length) which are tried in order. If a line matches then the action +you have specified is taken (ie reject means ignore it and accept +means gimme it).
+The important thing to remember is that if you specify a 'reject' +filter (all the lines in it say 'reject/spots' (for instance) then if +a spot comes in that doesn't match any of the lines then you will get +it BUT if you specify an 'accept' filter then any spots that don't +match are dumped. For example if I have a one line accept filter:-
+accept/spots on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
+then automatically you will ONLY get VHF spots from or to CQ zones 14 +15 and 16. If you set a reject filter like:
+reject/spots on hf/cw
+Then you will get everything EXCEPT HF CW spots, If you am interested in IOTA +and will work it even on CW then you could say:-
+reject/spots on hf/cw and not info iota
+But in that case you might only be interested in iota and say:-
+accept/spots not on hf/cw or info iota
+which is exactly the same. You should choose one or the other until +you are confortable with the way it works. Yes, you can mix them +(actually you can have an accept AND a reject on the same line) but +don't try this at home until you can analyse the results that you get +without ringing up the sysop for help.
+You can arrange your filter lines into logical units, either for your +own understanding or simply convenience. I have one set frequently:-
+reject/spots 1 on hf/cw +reject/spots 2 on 50000/1400000 not (by_zone 14,15,16 or call_zone 14,15,16)
+What this does is to ignore all HF CW spots (being a class B I can't +read any CW and couldn't possibly be interested in HF :-) and also +rejects any spots on VHF which don't either originate or spot someone +in Europe.
+This is an exmaple where you would use the line number (1 and 2 in +this case), if you leave the digit out, the system assumes '1'. Digits +'0'-'9' are available.
+You can leave the word 'and' out if you want, it is implied. You can +use any number of brackets to make the 'expression' as you want +it. There are things called precedence rules working here which mean +that you will NEED brackets in a situation like line 2 because, +without it, will assume:-
+(on 50000/1400000 and by_zone 14,15,16) or call_zone 14,15,16
+annoying, but that is the way it is. If you use OR - use +brackets. Whilst we are here CASE is not important. 'And BY_Zone' is +just 'and by_zone'.
+If you want to alter your filter you can just redefine one or more +lines of it or clear out one line. For example:-
+reject/spots 1 on hf/ssb
+or
+clear/spots 1
+To remove the filter in its entirty:-
+clear/spots all
+There are similar CLEAR commands for the other filters:-
+clear/announce +clear/wcy +clear/wwv
+ADVANCED USERS:-
+Once you are happy with the results you get, you may like to experiment.
+my example that filters hf/cw spots and accepts vhf/uhf spots from EU +can be written with a mixed filter, eg:
+rej/spot on hf/cw +acc/spot on 0/30000 +acc/spot 2 on 50000/1400000 and (by_zone 14,15,16 or call_zone 14,15,16)
+each filter slot actually has a 'reject' slot and an 'accept' +slot. The reject slot is executed BEFORE the accept slot.
+It was mentioned earlier that after a reject test that doesn't match, +the default for following tests is 'accept', the reverse is true for +'accept'. In the example what happens is that the reject is executed +first, any non hf/cw spot is passed to the accept line, which lets +thru everything else on HF.
+The next filter line lets through just VHF/UHF spots from EU.
+ +forward/latlong <node_call> Send latitude and longitude information to another cluster
This command sends all the latitude and longitude information that your +cluster is holding against callsigns. One advantage of recieving this +information is that more locator information is held by you. This +means that more locators are given on the DX line assuming you have +set/dxgrid enabled. This could be a LOT of information though, so +it is not recommended on slow links.
+ +forward/opername <call> Send out information on this <call> to all clusters
This command sends out any information held in the user file which can +be broadcast in PC41 protocol packets. This information is Name, QTH, Location +and Homenode. PC41s are only sent for the information that is available.
+ +help <cmd> Get help on a command
All commands can be abbreviated, so SHOW/DX can be abbreviated +to SH/DX, ANNOUNCE can be shortened to AN and so on.
+Look at the APROPOS <string> command which will search the help database +for the <string> you specify and give you a list of likely commands +to look at with HELP.
+ +init <node call> Re-initialise a link to an AK1A compatible node
This command attempts to re-initialise a link to a (usually) AK1A node +that has got confused, usually by a protocol loop of some kind. It may +work - but you usually will be better off simply disconnecting it (or +better, if it is a real AK1A node, doing an RCMD <node> DISC/F <your +node>).
+Best of luck - you will need it.
+ +kill <msgno> [<msgno> ..] Delete a message from the local system
Delete a message from the local system. You will only be able to +delete messages that you have originated or been sent (unless you are +the sysop).
+ +kill <msgno> [<msgno> ...] Remove or erase a message from the system
+kill from <call> Remove all messages from a callsign
+kill to <call> Remove all messages to a callsign
You can get rid of any message to or originating from your callsign using +this command. You can remove more than one message at a time.
+As a sysop you can kill any message on the system.
+ +kill full <msgno> [<msgno>] Delete a message from the whole cluster
Delete a message (usually a 'bulletin') from the whole cluster system.
+This uses the subject field, so any messages that have exactly the same subject +will be deleted. Beware!
+ +kill/expunge <msgno> [<msgno>..]Expunge a message
Deleting a message using the normal KILL commands only marks that message +for deletion. The actual deletion only happens later (usually two days later).
+The KILL EXPUNGE command causes the message to be truly deleted more or less +immediately.
+It otherwise is used in the same way as the KILL command.
+ + +links Show which nodes are physically connected
This is a quick listing that shows which links are connected and +some information about them. See WHO for a list of all connections.
+ + +load/aliases Reload the command alias table
Reload the /spider/cmd/Aliases file after you have editted it. You will need to +do this if you change this file whilst the cluster is running in order for the +changes to take effect.
+ +load/badmsg Reload the bad message table
Reload the /spider/msg/badmsg.pl file if you have changed it manually whilst +the cluster is running. This table contains a number of perl regular +expressions which are searched for in the fields targetted of each message. +If any of them match then that message is immediately deleted on receipt.
+ +load/badwords Reload the bad words table
Reload the /spider/data/badwords file if you have changed it manually whilst +the cluster is running. This file contains a list of words which, if found +on certain text portions of PC protocol, will cause those protocol frames +to be rejected. It will all put out a message if any of these words are +used on the announce, dx and talk commands. The words can be one or +more on a line, lines starting with '#' are ignored.
+ +load/bands Reload the band limits table
Reload the /spider/data/bands.pl file if you have changed it manually whilst +the cluster is running.
+ +load/cmd_cache Reload the automatic command cache
Normally, if you change a command file in the cmd or local_cmd tree it will +automatially be picked up by the cluster program. Sometimes it can get confused +if you are doing a lot of moving commands about or delete a command in the +local_cmd tree and want to use the normal one again. Execute this command to +reset everything back to the state it was just after a cluster restart.
+ +load/forward Reload the msg forwarding routing table
Reload the /spider/msg/forward.pl file if you have changed it +manually whilst the cluster is running.
+ +load/messages Reload the system messages file
If you change the /spider/perl/Messages file (usually whilst fiddling/writing ne +commands) you can have them take effect during a cluster session by executing this +command. You need to do this if get something like :-
+unknown message 'xxxx' in lang 'en'
+ +load/prefixes Reload the prefix table
Reload the /spider/data/prefix_data.pl file if you have changed it manually +whilst the cluster is running.
+ +merge <node> [<no spots>/<no wwv>] Ask for the latest spots and WWV
MERGE allows you to bring your spot and wwv database up to date. By default +it will request the last 10 spots and 5 WWVs from the node you select. The +node must be connected locally.
+You can request any number of spots or wwv and although they will be appended +to your databases they will not duplicate any that have recently been added +(the last 2 days for spots and last month for WWV data).
+ +msg <cmd> <msgno> [data ...] Alter various message parameters
Alter message parameters like To, From, Subject, whether private or bulletin +or return receipt (RR) is required or whether to keep this message from timing +out.
++
+
+ MSG TO <msgno> <call> - change TO callsign to <call>
+ MSG FRom <msgno> <call> - change FROM callsign to <call>
+ MSG PRrivate <msgno> - set private flag
+ MSG NOPRrivate <msgno> - unset private flag
+ MSG RR <msgno> - set RR flag
+ MSG NORR <msgno> - unset RR flag
+ MSG KEep <msgno> - set the keep flag (message won't be deleted ever)
+ MSG NOKEep <msgno> - unset the keep flag
+ MSG SUbject <msgno> <new> - change the subject to <new>
+ MSG WAittime <msgno> - remove any waitting time for this message
+ MSG NOREad <msgno> - mark message as unread
+ MSG REad <msgno> - mark message as read
+ MSG QUeue - queue any outstanding bulletins
+ MSG QUeue 1 - queue any outstanding private messages
+
+
+
+You can look at the status of a message by using:-
+STAT/MSG <msgno>
+This will display more information on the message than DIR does.
+ +pc <call> <text> Send text (eg PC Protocol) to <call>
Send some arbitrary text to a locally connected callsign. No processing is done on +the text. This command allows you to send PC Protocol to unstick things if problems +arise (messages get stuck etc). eg:-
+pc gb7djk PC33^GB7TLH^GB7DJK^400^
+You can also use in the same way as a talk command to a connected user but +without any processing, added of "from <blah> to <blah>" or whatever.
+pc G1TLH Try doing that properly!!!
+ +ping <node> Check the link quality between nodes
his command allows you to send a frame to another cluster node on +the network and get a return frame. The time it takes to do this +is a good indication of the quality of the link. The actual time +it takes is output to the console in seconds. +Any visible cluster node can be PINGed.
+ + +rcmd <node call> <cmd> Send a command to another DX cluster
This command allows you to send nearly any command to another DX Cluster +node that is connected to the system.
+Whether you get any output is dependant on a) whether the other system knows +that the node callsign of this cluster is in fact a node b) whether the +other system is allowing RCMDs from this node and c) whether you have +permission to send this command at all.
+ +read Read the next unread personal message addressed to you
+read <msgno> Read the specified message
You can read any messages that are sent as 'non-personal' and also any +message either sent by or sent to your callsign.
+ + +read <msgno> Read a message on the system
As a sysop you may read any message on the system
+ +reject/announce [0-9] <pattern> Set a reject filter
+for announce
Create an 'reject this announce' line for a filter.
+An reject filter line means that if the announce matches this filter it is +passed onto the user. See HELP FILTERS for more info. Please read this +to understand how filters work - it will save a lot of grief later on.
+You can use any of the following things in this line:-
++
+
+ info <string> eg: iota or qsl
+ by <prefixes> eg: G,M,2
+ origin <prefixes>
+ origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <numbers>
+ origin_zone <numbers>
+ by_dxcc <numbers>
+ by_itu <numbers>
+ by_zone <numbers>
+ channel <prefixes>
+ wx 1 filter WX announces
+ dest <prefixes> eg: 6MUK,WDX (distros)
+
+
+
+some examples:-
++
+
+ rej/ann by_zone 14,15,16 and not by G,M,2
+
+
+
+You can use the tag 'all' to reject everything eg:
++
+
+ rej/ann all
+
+
+
+but this probably for advanced users...
+ +reject/announce <call> [input] [0-9] <pattern> Announce filter sysop version
This version allows a sysop to set a filter for a callsign as well as the +default for nodes and users eg:-
++
+
+ reject/ann by G,M,2
+ reject/ann input node_default by G,M,2
+ reject/ann user_default by G,M,2
+
+
+
+
+reject/route <call> [0-9] <pattern> Set an 'reject' filter line for routing
Create an 'reject this routing PC Protocol' line for a filter.
+ +An reject filter line means that if a PC16/17/19/21/24/41/50 matches this filter +it is NOT passed thru that interface. See HELP FILTERING for more info. Please +read this to understand how filters work - it will save a lot of grief later on. +You can use any of the following things in this line:-
++
+
+ call <prefixes> the callsign of the thingy
+ call_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ call_itu <numbers>
+ call_zone <numbers>
+ origin <prefixes> really the interface it came in on
+ origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <numbers>
+ origin_zone <numbers>
+
+
+
+
+some examples:-
++
+
+ rej/route gb7djk call_dxcc 61,38 (everything except UK+EIRE nodes)
+
+
+
+
+You can use the tag 'all' to reject everything eg:
++
+
+ rej/route all (equiv to [very] restricted mode)
+
+
+
+
+reject/spots [0-9] <pattern> Set a reject filter line for spots
Create a 'reject this spot' line for a filter.
+A reject filter line means that if the spot matches this filter it is +dumped (not passed on). See HELP FILTERS for more info. Please read this +to understand how filters work - it will save a lot of grief later on.
+You can use any of the following things in this line:-
++
+
+ freq <range> eg: 0/30000 or hf or hf/cw or 6m,4m,2m
+ on <range> same as 'freq'
+ call <prefixes> eg: G,PA,HB9
+ info <string> eg: iota or qsl
+ by <prefixes>
+ call_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ call_itu <numbers>
+ call_zone <numbers>
+ by_dxcc <numbers>
+ by_itu <numbers>
+ by_zone <numbers>
+ origin <prefixes>
+ channel <prefixes>
+
+
+
+For frequencies, you can use any of the band names defined in +SHOW/BANDS and you can use a subband name like: cw, rtty, data, ssb - +thus: hf/ssb. You can also just have a simple range like: 0/30000 - +this is more efficient than saying simply: on HF (but don't get +too hung up about that)
+some examples:-
++
+
+ rej/spot 1 on hf
+ rej/spot 2 on vhf and not (by_zone 14,15,16 or call_zone 14,15,16)
+
+
+
+You can use the tag 'all' to reject everything eg:
++
+
+ rej/spot 3 all
+
+
+
+but this probably for advanced users...
+ +reject/spots <call> [input] [0-9] <pattern>
+Reject spot filter sysop version
This version allows a sysop to set a filter for a callsign as well as the +default for nodes and users eg:-
++
+
+ reject/spot db0sue-7 1 by_zone 14,15,16
+ reject/spot node_default all
+ set/hops node_default 10
+
+ reject/spot user_default by G,M,2
+
+
+
+
+reject/wcy [0-9] <pattern> Set a reject WCY filter
It is unlikely that you will want to do this, but if you do then you can +filter on the following fields:-
++
+
+ by <prefixes> eg: G,M,2
+ origin <prefixes>
+ origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <numbers>
+ origin_zone <numbers>
+ by_dxcc <numbers>
+ by_itu <numbers>
+ by_zone <numbers>
+ channel <prefixes>
+
+
+
+There are no examples because WCY Broadcasts only come from one place and +you either want them or not (see UNSET/WCY if you don't want them).
+This command is really provided for future use.
+See HELP FILTER for information.
+ +reject/wcy <call> [input] [0-9] <pattern>
+WCY reject filter sysop version
This version allows a sysop to set a filter for a callsign as well as the +default for nodes and users eg:-
+reject/wcy gb7djk all
+ +reject/wwv [0-9] <pattern> Set a reject WWV filter
It is unlikely that you will want to do this, but if you do then you can +filter on the following fields:-
++
+
+ by <prefixes> eg: G,M,2
+ origin <prefixes>
+ origin_dxcc <numbers> eg: 61,62 (from eg: sh/pre G)
+ origin_itu <numbers>
+ origin_zone <numbers>
+ by_dxcc <numbers>
+ by_itu <numbers>
+ by_zone <numbers>
+ channel <prefixes>
+
+
+
+for example
++
+
+ reject/wwv by_zone 14,15,16
+
+
+
+is probably the only useful thing to do (which will only show WWV broadcasts +by stations in the US).
+See HELP FILTER for information.
+ +reject/wwv <call> [input] [0-9] <pattern>
+WWV reject filter sysop version
This version allows a sysop to set a filter for a callsign as well as the +default for nodes and users eg:-
++
+
+ reject/wwv db0sue-7 1 by_zone 4
+ reject/wwv node_default all
+
+ reject/wwv user_default by W
+
+
+
+
+reply Reply (privately) to the last message that you have read
+reply <msgno> Reply (privately) to the specified message
+reply B <msgno> Reply as a Bulletin to the specified message
+reply NOPrivate <msgno> Reply as a Bulletin to the specified
+message
+reply RR <msgno> Reply to the specified message with read receipt
You can reply to a message and the subject will automatically have +"Re:" inserted in front of it, if it isn't already present.
+You can also use all the extra qualifiers such as RR, PRIVATE, +NOPRIVATE, B that you can use with the SEND command (see SEND +for further details)
+ +send <call> [<call> ...] Send a message to one or more callsigns
+send RR <call> Send a message and ask for a read receipt
+send COPY <msgno> <call> Send a copy of a message to someone
+send PRIVATE <call> Send a personal message
+send NOPRIVATE <call> Send a message to all stations
All the SEND commands will create a message which will be sent either to +an individual callsign or to one of the 'bulletin' addresses.
+SEND <call> on its own acts as though you had typed SEND PRIVATE, that is +it will mark the message as personal and send it to the cluster node that +that callsign is connected to.
+You can have more than one callsign in all of the SEND commands.
+You can have multiple qualifiers so that you can have for example:-
++
+
+ SEND RR COPY 123 PRIVATE G1TLH G0RDI
+
+
+
+which should send a copy of message 123 to G1TLH and G0RDI and you will +receive a read receipt when they have read the message.
+SB is an alias for SEND NOPRIVATE (or send a bulletin in BBS speak) +SP is an alias for SEND PRIVATE
+ +set/address <your_address> Record your postal address
Literally, record your address details on the cluster.
+ +set/announce Allow announce messages
Allow announce messages to arrive at your terminal.
+ +set/arcluster <node_call> [<node_call> ...] Make
+the node_call an AR-Cluster type node
Set the node_call as an AR-Cluster type node
+ +set/baddx <call> Stop words we do not wish to see in the callsign field
+of a dx spot being propagated
Setting a word as 'baddx' will prevent spots with that word in the callsign +field of a DX spot from going any further. They will not be displayed and they +will not be sent onto other nodes.
+The word must be wriiten in full, no wild cards are allowed eg:-
++
+
+ set/baddx FORSALE VIDEO FR0G
+
+
+
+To allow a word again, use the following command ...
++
+
+ unset/baddx VIDEO
+
+
+
+
+set/badnode <node_call> Stop spots from this node_call
+being propagated
Setting a callsign as a 'badnode' will prevent spots from that node +going any further. They will not be displayed and they will not be +sent onto other nodes.
+The call can be a full or partial call (or a prefix), eg:-
++
+
+ set/badnode K1TTT
+
+
+
+will stop anything from K1TTT (including any SSID's)
++
+
+ unset/badnode K1TTT
+
+
+
+will allow spots from him again.
+Use with extreme care. This command may well be superceded by FILTERing.
+ +set/badspotter <call> Stop spots from this callsign being propagated
Setting a callsign as a 'badspotter' will prevent spots from this callsign +going any further. They will not be displayed and they will not be +sent onto other nodes.
+The call must be written in full, no wild cards are allowed eg:-
++
+
+ set/badspotter VE2STN
+
+
+
+will stop anything from VE2STN. If you want SSIDs as well then you must +enter them specifically.
++
+
+ unset/badspotter VE2STN
+
+
+
+will allow spots from him again.
+Use with extreme care. This command may well be superceded by FILTERing.
+ +set/badword <word> Stop things with this word being propogated
Setting a word as a 'badword' will prevent things like spots, +announces or talks with this word in the the text part from going any +further. They will not be displayed and they will not be sent onto +other nodes.
+The word must be written in full, no wild cards are allowed eg:-
+set/badword annihilate annihilated annihilation
+will stop anything with these words in the text.
+unset/badword annihilated
+will allow text with this word again.
+ + +set/beep Add beeps to terminal messages
Add a beep to DX and other terminal messages.
+ +set/bbs <call> [<call>..]Make <call> a BBS
set/clx <node_call> [<node_call> ...] Make
+the node_call a CLX type node
Set the node_call as a CLX type node
+ +set/debug <name> Add a debug level to the debug set
You can choose to log several different levels. The levels are
+chan +state +msg +cron +connect
+You can show what levels you are logging with the show/debug +command.
+You can remove a debug level with unset/debug <name>
+ +set/dxAllow DX messages to arrive at your terminal
You can stop DX messages with the unset/dx command
+ +set/dxgridAllow grid squares on the end of DX messages
Some logging programs do not like the additional information at +the end of a DX spot. If this is the case, use the unset/dxgrid +command to remove the grid squares.
+ +set/dxnet <node_call> [<node_call> ...] Make
+the node_call a DXNet type node
Set the node_call as a DXNet type node
+ +set/echo Make the cluster echo your input
If you are connected via a telnet session, different implimentations +of telnet handle echo differently depending on whether you are +connected via port 23 or some other port. You can use this command +to change the setting appropriately.
+You can remove the echo with the unset/echo command
+The setting is stored in your user profile.
+YOU DO NOT NEED TO USE THIS COMMAND IF YOU ARE CONNECTED VIA AX25.
+ +set/email <email_address> Set email address(es) and forward your personals
If any personal messages come in for your callsign then you can use +these commands to control whether they are forwarded onto your email +address. To enable the forwarding do something like:-
+SET/EMAIL mike.tubby@somewhere.com
+You can have more than one email address (each one separated by a space). +Emails are forwarded to all the email addresses you specify.
+You can disable forwarding by:-
+UNSET/EMAIL
+ +set/here Set the here flag
Let others on the cluster know you are here by only displaying your +callsign. If you are away from your terminal you can use the unset/here +command to let people know you are away. This simply puts brackets +around your callsign to indicate you are not available.
+ +set/homenode <node_call> Set your home cluster
Tell the cluster system where you normally connect to. Any Messages sent +to you will normally find their way there should you not be connected. +eg:-
++
+
+ SET/HOMENODE gb7djk
+
+
+
+
+set/hops <node_call> ann|spots|wwv|wcy <n>
+Set hop count
Set the hop count for a particular type of broadcast for a node.
+This command allows you to set up special hop counts for a node +for currently: announce, spots, wwv and wcy broadcasts.
++
+
+eg:
+ set/hops gb7djk ann 10
+ set/hops gb7mbc spots 20
+
+
+
+Set SHOW/HOPS for information on what is already set. This command +creates a filter and works in conjunction with the filter system.
+ +set/isolate <node call> Isolate a node from the rest of the network
Connect a node to your system in such a way that you are a full protocol +member of its network and can see all spots on it, but nothing either leaks +out from it nor goes back into from the rest of the nodes connected to you.
+You can potentially connect several nodes in this way.
+You can see which nodes are isolated with the show/isolate (1) command.
+You can remove the isolation with the command unset/isolate.
+ +set/language <language> Set the language you wish to use
You can select the language that you want the cluster to use. Currently +the languages available are en (English) and nl (Dutch).
+ +set/location <lat and long> Set your latitude and longitude
You can set your latitude and longitude manually or alternatively use the +set/qra command which will do the conversion for you.
++
+
+ set/location 54 04 N 2 02 E
+
+
+
+
+
+set/sys_location <lat & long> Set your cluster latitude and longitude
In order to get accurate headings and such like you must tell the system +what your latitude and longitude is. If you have not yet done a SET/QRA +then this command will set your QRA locator for you. For example:-
++
+
+ SET/LOCATION 52 22 N 0 57 E
+
+
+
+
+set/logininfo Show logins and logouts of nodes and users
Show users and nodes when they log in and out of the local cluster. You +can stop these messages by using the unset/logininfo command.
+ + +set/lockout <call> Stop a callsign connecting to the cluster
You can show who is locked out with the show/lockout command. +To allow the user to connect again, use the unset/lockout command.
+ +set/name <your_name> Set your name
Tell the cluster what your name is, eg:-
++
+
+ set/name Dirk
+
+
+
+
+set/node <call> [<call> ...] Make the callsign an AK1A cluster
Tell the system that the call(s) are to be treated as AK1A cluster and +fed PC Protocol rather normal user commands.
+From version 1.41 you can also set the following types of cluster
++
+
+ set/spider
+ set/dxnet
+ set/clx
+ set/arcluster
+
+
+
+To see what your nodes are set to, use the show/nodes command.
+ +set/obscount <count> <node call> Set the 'pump-up' obsolescence counter
From version 1.35 onwards neighbouring nodes are pinged at regular intervals (see +SET/PINGINTERVAL), usually 300 seconds or 5 minutes. There is a 'pump-up' +counter which is decremented on every outgoing ping and then reset to +the 'obscount' value on every incoming ping. The default value of this +parameter is 2.
+What this means is that a neighbouring node will be pinged twice at +(default) 300 second intervals and if no reply has been heard just before +what would be the third attempt, that node is disconnected.
+If a ping is heard then the obscount is reset to the full value. Using +default values, if a node has not responded to a ping within 15 minutes, +it is disconnected.
+ +set/page <n> Set the number of lines per page
Tell the system how many lines you wish on a page when the number of lines +of output from a command is more than this. The default is 20. Setting it +explicitly to 0 will disable paging.
++
+
+ SET/PAGE 30
+ SET/PAGE 0
+
+
+
+The setting is stored in your user profile.
+ +set/password Set your own password
This command only works for a 'telnet' user (currently). It will +only work if you have a password already set. This initial password +can only be set by the sysop.
+When you execute this command it will ask you for your old password, +then ask you to type in your new password twice (to make sure you +get it right). You may or may not see the data echoed on the screen +as you type, depending on the type of telnet client you have.
+ +set/password <callsign> <string> Set a users password
The password for a user can only be set by a full sysop. The string +can contain any characters.
+The way this field is used depends on context. If it is being used in +the SYSOP command context then you are offered 5 random numbers and you +have to supply the corresponding letters. This is now mainly for ax25 +connections.
+If it is being used on incoming telnet connections then, if a password +is set or the:
+set/var $main::passwdreq = 1
+command is executed in the startup script, then a password prompt is +given after the normal 'login: ' prompt.
+The command "unset/password" is provided to allow a sysop to remove a +users password completely in case a user forgets or loses their password.
+ +set/pinginterval <time> <node call> Set the ping time to neighbouring nodes
As from version 1.35 all neighbouring nodes are pinged at regular intervals +in order to determine the rolling quality of the link and, in future, to +affect routing decisions. The default interval is 300 secs or 5 minutes.
+You can use this command to set a different interval. Please don't.
+But if you do the value you enter is treated as minutes up 60 and seconds +for numbers greater than that.
+This is used also to help determine when a link is down at the far end +(as certain cluster software doesn't always notice), see SET/OBSCOUNT +for more information.
+ +set/privilege <n> <call> [<call> ...] Set the privilege level on a call
Set the privilege level on a callsign. The privilege levels that pertain +to commands are as default:-
++
+
+ 0 - normal user
+ 1 - allow remote nodes normal user RCMDs
+ 5 - various privileged commands (including shutdown, but not disc-
+ connect), the normal level for another node.
+ 8 - more privileged commands (including disconnect)
+ 9 - local sysop privilege. DO NOT SET ANY REMOTE USER OR NODE TO THIS
+ LEVEL.
+
+
+
+If you are a sysop and you come in as a normal user on a remote connection +your privilege will automatically be set to 0.
+ +set/spider <node_call> [<node_call> ...] Make
+the node_call a DXSpider type node
Set the node_call as a DXSpider type node
+ +set/sys_qra <locator> Set your cluster QRA locator
set/qra <locator> Set your QRA locator
Tell the system what your QRA (or Maidenhead) locator is. If you have not +done a SET/LOCATION then your latitude and longitude will be set roughly +correctly (assuming your locator is correct ;-). For example:-
++
+
+ SET/QRA JO02LQ
+
+
+
+
+set/qth <your QTH> Set your QTH
Tell the system where your are. For example:-
++
+
+ set/qth East Dereham, Norfolk
+
+
+
+
+set/register <call> Mark a user as registered
Registration is a concept that you can switch on by executing the
+set/var $main::regreq = 1
+command (usually in your startup file)
+If a user is NOT registered then, firstly, instead of the normal +motd file (/spider/data/motd) being sent to the user at startup, the +user is sent the motd_nor file instead. Secondly, the non registered +user only has READ-ONLY access to the node. The non-registered user +cannot use DX, ANN etc.
+The only exception to this is that a non-registered user can TALK or +SEND messages to the sysop.
+To unset a user use the 'unset/register' command
+ +set/talk Allow talk messages to be seen at your console
Allow talk messages to arrive at your console. You can switch off +talks with the unset/talk command.
+ +set/wcy Allow WCY messages to be seen at your console
Allow WCY information to be seen at your console. You can switch off +WCY messages with the unset/wcy command.
+ +set/wwv Allow WWV messages to be seen at your console
Allow WWV information to be seen at your console. You can switch off +WWV messages with the unset/wwv command.
+ +set/wx Allow WX messages to be seen at your console
Allow WX information to be seen at your console. You can switch off +WX messages with the unset/wx command.
+ +show/baddxShow all the bad dx calls in the system
Display all the bad dx callsigns in the system, see SET/BADDX +for more information.
+ +show/badnode Show all the bad nodes in the system
Display all the bad node callsigns in the system, see SET/BADNODE +for more information.
+ +show/badspotter Show all the bad spotters in the system
Display all the bad spotter's callsigns in the system, see SET/BADSPOTTER +for more information.
+ +show/badword Show all the bad words in the system
Display all the bad words in the system, see SET/BADWORD +for more information.
+ +show/configuration [<node>] Show all visible nodes and their users
This command allows you to see all the users that can be seen +and the nodes to which they are connected. With the optional node, +you can specify a particular node to look at.
+This command is normally abbreviated to: sh/c
+BE WARNED: the list that is returned can be VERY long
+ +show/configuration/node Show all the nodes connected
Show all the nodes connected locally and the nodes they have connected.
+ +show/connect Show all the active connections
This command shows information on all the active connections known to +the node. This command gives slightly more information than WHO.
+ +show/date [<prefix>|<callsign>] Show
+the local time
This is very nearly the same as SHOW/TIME, the only difference the format +of the date string if no arguments are given.
+If no prefixes or callsigns are given then this command returns the local +time and UTC as the computer has it right now. If you give some prefixes +then it will show UTC and UTC + the local offset (not including DST) at +the prefixes or callsigns that you specify.
+ +show/debug Show what levels of debug you are logging
The levels can be set with set/debug
+ +show/dx [options] interrogate the spot database
If you just type SHOW/DX you will get the last so many spots +(sysop configurable, but usually 10).
+In addition you can add any number of these options in very nearly +any order to the basic SHOW/DX command, they are:-
++
+
+
+on <band> - eg 160m 20m 2m 23cm 6mm
+on <region> - eg hf vhf uhf shf (see SHOW/BANDS)
+
+<number> - the number of spots you want
+<from>-<to> - <from> spot no <to> spot no in
+ the selected list
+
+<prefix> - for a spotted callsign beginning with <prefix>
+*<suffix> - for a spotted callsign ending in <suffix>
+*<string>* - for a spotted callsign containing <string>
+
+day <number> - starting <number> days ago
+day <from>-<to> - <from> days <to> days ago
+
+info <text> - any spots containing <text> in the info or remarks
+
+by <call> - any spots spotted by <call> (spotter <call>
+ is the same).
+
+qsl - this automatically looks for any qsl info on the call
+ held in the spot database.
+
+iota [<iota>] - If the iota island number is missing it will
+ look for the string iota and anything which looks like
+ an iota island number. If you specify then it will look
+ for that island.
+
+qra [<locator>] - this will look for the specific locator if
+ you specify one or else anything that looks like a locator.
+
+
+
+e.g.
++
+
+
+ SH/DX 9m0
+ SH/DX on 20m info iota
+ SH/DX 9a on vhf day 30
+ SH/DX rf1p qsl
+ SH/DX iota
+ SH/DX iota eu-064
+ SH/DX qra jn86
+
+
+
+
+One of the more important things a cluster sysop needs to do is to get -information to his users. The simplest way to do this is to have a banner -that is sent to the user on login. This is know as a "message of the day" -or "motd". To set this up, simply create a file in /spider/data called motd -and edit it to say whatever you want. It is purely a text file and will be -sent automatically to anyone logging in to the cluster. +
show/dxcc <prefix> Interrogate the spot database by country
This command takes the <prefix> (which can be a full or partial +callsign if desired), looks up which internal country number it is +and then displays all the spots as per SH/DX for that country.
+The options for SHOW/DX also apply to this command. +e.g.
-
+
+
+ SH/DXCC G
+ SH/DXCC W on 20m info iota
+
+
+
+
+If for any reason the cluster is down, maybe for upgrade or maintenance but -the machine is still running, a message can be sent to the user advising them -of the fact. This message lives in the /spider/data directory and is called -"offline". Simply create the file and edit it to say whatever you wish. -This file will be sent to a user attempting to log into the cluster when -DXSpider is not actually running. +
sh/dxstats Show the DX Statistics for last 31 days
Show the total DX spots for the last 31 days
+ + +show/files [<filearea> [<string>]] List
+the contents of a filearea
SHOW/FILES on its own will show you a list of the various fileareas +available on the system. To see the contents of a particular file +area type:-
++
+
+ SH/FILES <filearea>
+
+
+
+where <filearea> is the name of the filearea you want to see the +contents of.
+You can also use shell globbing characters like '*' and '?' in a +string to see a selection of files in a filearea eg:-
-
+
+ SH/FILES bulletins arld*
+
+
+
+See also TYPE - to see the contents of a file.
+ +show/filter Show the filters you have set
Show the contents of all the filters that are set by you. This command +displays all the filters set - for all the various categories.
+ +show/filter <callsign> Show the filters set by <callsign>
A sysop can look at any filters that have been set.
+ +show/hfstats Show the HF DX Statistics for last 31 days
Show the HF DX spots breakdown by band for the last 31 days
+ +show/hftable Show the HF DX Spotter Table for your country
Show the HF DX Spotter table for your country for the last 31 days
+ +show/hops <node_call> [ann|spots|wcy|wwv|] Show the hop counts for a node
This command shows the hop counts set up for a node. You can specify +which category you want to see. If you leave the category out then +all the categories will be listed.
+ +show/isolate Show a list of isolated nodes
Show which nodes are currently set to be isolated.
+ +You can set other text messages to be read by the user if they input the file -name. This could be for news items or maybe information for new users. -To set this up, make a directory under /spider called packclus. -Under this directory you can create files called news or newuser -for example. In fact you can create files with any names you like. These can -be listed by the user with the command .... +
show/lockout Show a list of excluded callsigns
Show a list of callsigns that have been excluded (locked out) of the +cluster locally with the set/lockout command
+ +show/log [<callsign>] Show excerpts from the system log
This command outputs a short section of the system log. On its own +it will output a general logfile. With the optional callsign it will +show output from the log associated with that callsign.
+ +show/moon [<prefix>|<callsign>] Show moon
+rise and set times
Show the Moon rise and set times for a (list of) prefixes or callsigns, +together with the azimuth and elevation of the sun currently at those +locations.
+If you don't specify any prefixes or callsigns, it will show the times for +your QTH (assuming you have set it with either SET/LOCATION or SET/QRA), +together with the current azimuth and elevation.
+In addition, it will show the gain or loss dB relative to the nominal +distance of 385,000Km due to the ellipsoidal nature of the orbit.
+If all else fails it will show the Moonrise and set times for the node +that you are connected to.
+For example:-
-show/files
+ SH/MOON
+ SH/MOON G1TLH W5UN
-They can be read by the user by typing the command .... +
+ +show/muf <prefix> [<hours>][long] Show
+the likely propagation to <prefix>
This command allow you to estimate the likelihood of you contacting +a station with the prefix you have specified. The output assumes a modest +power of 20dBW and receiver sensitivity of -123dBm (about 0.15muV/10dB SINAD)
+The result predicts the most likely operating frequencies and signal +levels for high frequency (shortwave) radio propagation paths on +specified days of the year and hours of the day. It is most useful for +paths between 250 km and 6000 km, but can be used with reduced accuracy +for paths shorter or longer than this.
+The command uses a routine MINIMUF 3.5 developed by the U.S. Navy and +used to predict the MUF given the predicted flux, day of the year, +hour of the day and geographic coordinates of the transmitter and +receiver. This routine is reasonably accurate for the purposes here, +with a claimed RMS error of 3.8 MHz, but much smaller and less complex +than the programs used by major shortwave broadcasting organizations, +such as the Voice of America.
+The command will display some header information detailing its +assumptions, together with the locations, latitude and longitudes and +bearings. It will then show UTC (UT), local time at the other end +(LT), calculate the MUFs, Sun zenith angle at the midpoint of the path +(Zen) and the likely signal strengths. Then for each frequency for which +the system thinks there is a likelihood of a circuit it prints a value.
+The value is currently a likely S meter reading based on the conventional +6dB / S point scale. If the value has a '+' appended it means that it is +1/2 an S point stronger. If the value is preceeded by an 'm' it means that +there is likely to be much fading and by an 's' that the signal is likely +to be noisy.
+By default SHOW/MUF will show the next two hours worth of data. You +can specify anything up to 24 hours worth of data by appending the no of +hours required after the prefix. For example:-
-type news
+ SH/MUF W
-If the file they want to read is called news. You could also set -an alias for this in the Alias file to allow them just to type news +
+produces:
-
You can also store other information in this directory, either directly or -nested under directories. One use for this would be to store DX bulletins -such as the OPDX bulletins. These can be listed and read by the user. -To keep things tidy, make a directory under /spider/packclus called -bulletins. Now copy any OPDX or similar bulletins into it. These -can be listed by the user in the same way as above using the show/files -command with an extension for the bulletins directory you have just created, -like this .... +
+
+ RxSens: -123 dBM SFI: 159 R: 193 Month: 10 Day: 21
+ Power : 20 dBW Distance: 6283 km Delay: 22.4 ms
+ Location Lat / Long Azim
+ East Dereham, Norfolk 52 41 N 0 57 E 47
+ United-States-W 43 0 N 87 54 W 299
+ UT LT MUF Zen 1.8 3.5 7.0 10.1 14.0 18.1 21.0 24.9 28.0 50.0
+ 18 23 11.5 -35 mS0+ mS2 S3
+ 19 0 11.2 -41 mS0+ mS2 S3
+
+
+
+indicating that you will have weak, fading circuits on top band and +80m but usable signals on 40m (about S3).
+inputting:-
-show/files bulletins
+ SH/MUF W 24
+
+will get you the above display, but with the next 24 hours worth of +propagation data.
-
An example would look like this .... +
+
+ SH/MUF W L 24
+ SH/MUF W 24 Long
+
+
+
+Gives you an estimate of the long path propagation characterics. It +should be noted that the figures will probably not be very useful, nor +terrible accurate, but it is included for completeness.
+ +show/newconfiguration [<node>] Show all the nodes and users visible
This command allows you to see all the users that can be seen +and the nodes to which they are connected.
+This command produces essentially the same information as +SHOW/CONFIGURATION except that it shows all the duplication of +any routes that might be present It also uses a different format +which may not take up quite as much space if you don't have any +loops.
+BE WARNED: the list that is returned can be VERY long
+ +show/newconfiguration/node Show all the nodes connected locally
Show all the nodes connected to this node in the new format.
+ +show/node [<node_call> ...] Show the type and version
+number of nodes
Show the type and version (if connected) of the nodes specified on the +command line. If no callsigns are specified then a sorted list of all +the non-user callsigns known to the system will be displayed.
+ +show/prefix <callsign> Interrogate the prefix database
This command takes the <callsign> (which can be a full or partial +callsign or a prefix), looks up which internal country number +it is and then displays all the relevant prefixes for that country +together with the internal country no, the CQ and ITU regions.
+See also SHOW/DXCC
+ + +show/program Show the locations of all the included program modules
Show the name and location where every program module was load from. This +is useful for checking where you think you have loaded a .pm file from.
+ +show/qra <locator> [<locator>] Show the distance
+between locators
+show/qra <lat> <long> Convert latitude and longitude to a locator
This is a multipurpose command that allows you either to calculate the +distance and bearing between two locators or (if only one locator is +given on the command line) the distance and beraing from your station +to the locator. For example:-
-sh/files
-bulletins DIR 20-Dec-1999 1715Z news 1602 14-Dec-1999 1330Z
+SH/QRA IO92QL
+SH/QRA JN06 IN73
-You can see that in the files area (basically the packclus directory) there is a -file called news and a directory called bulletins. You can -also see that dates they were created. In the case of the file news, -you can also see the time it was last modified, a good clue as to whether the -file has been updated since you last read it. To read the file called -news you would simply issue the command .... +
+The first example will show the distance and bearing to the locator from +yourself, the second example will calculate the distance and bearing from +the first locator to the second. You can use 4 or 6 character locators.
+It is also possible to convert a latitude and longitude to a locator by +using this command with a latitude and longitude as an argument, for +example:-
-type news
+SH/QRA 52 41 N 0 58 E
-To look what is in the bulletins directory you issue the command .... +
+ +show/qrz <callsign> Show any callbook details on a callsign
This command queries the QRZ callbook server on the internet +and returns any information available for that callsign. This service +is provided for users of this software by http://www.qrz.com
+ +show/registered [<prefix>[ Show the registered users
show/route <callsign> Show the route to <callsign>
This command allows you to see to which node the callsigns specified are +connected. It is a sort of inverse sh/config.
-show/files bulletins
-opdx390 21381 29-Nov-1999 1621Z opdx390.1 1670 29-Nov-1999 1621Z
-opdx390.2 2193 29-Nov-1999 1621Z opdx391 25045 29-Nov-1999 1621Z
-opdx392 35969 29-Nov-1999 1621Z opdx393 15023 29-Nov-1999 1621Z
-opdx394 33429 29-Nov-1999 1621Z opdx394.1 3116 29-Nov-1999 1621Z
-opdx395 24319 29-Nov-1999 1621Z opdx396 32647 29-Nov-1999 1621Z
-opdx396.1 5537 29-Nov-1999 1621Z opdx396.2 6242 29-Nov-1999 1621Z
-opdx397 18433 29-Nov-1999 1621Z opdx398 19961 29-Nov-1999 1621Z
-opdx399 17719 29-Nov-1999 1621Z opdx400 19600 29-Nov-1999 1621Z
-opdx401 27738 29-Nov-1999 1621Z opdx402 18698 29-Nov-1999 1621Z
-opdx403 24994 29-Nov-1999 1621Z opdx404 15685 29-Nov-1999 1621Z
-opdx405 13984 29-Nov-1999 1621Z opdx405.1 4166 29-Nov-1999 1621Z
-opdx406 28934 29-Nov-1999 1621Z opdx407 24153 29-Nov-1999 1621Z
-opdx408 15081 29-Nov-1999 1621Z opdx409 23234 29-Nov-1999 1621Z
-Press Enter to continue, A to abort (16 lines) >
+ sh/route n2tly
-You can now read any file in this directory using the type command, like this .... +
+ +show/satellite <name> [<hours> <interval>]
+Show satellite tracking data
Show the tracking data from your location to the satellite of your choice +from now on for the next few hours.
+If you use this command without a satellite name it will display a list +of all the satellites known currently to the system.
+If you give a name then you can obtain tracking data of all the passes +that start and finish 5 degrees below the horizon. As default it will +give information for the next three hours for every five minute period.
+You can alter the number of hours and the step size, within certain +limits.
+Each pass in a period is separated with a row of '-----' characters
+So for example:-
-type bulletins/opdx391
-Ohio/Penn DX Bulletin No. 391
-The Ohio/Penn Dx PacketCluster
-DX Bulletin No. 391
-BID: $OPDX.391
-January 11, 1999
-Editor Tedd Mirgliotta, KB8NW
-Provided by BARF-80 BBS Cleveland, Ohio
-Online at 440-237-8208 28.8k-1200 Baud 8/N/1 (New Area Code!)
-Thanks to the Northern Ohio Amateur Radio Society, Northern Ohio DX
-Association, Ohio/Penn PacketCluster Network, K1XN & Golist, WB2RAJ/WB2YQH
-& The 59(9) DXReport, W3UR & The Daily DX, K3TEJ, KN4UG, W4DC, NC6J, N6HR,
-Press Enter to continue, A to abort (508 lines) >
+SH/SAT AO-10
+SH/SAT FENGYUN1 12 2
-The page length will of course depend on what you have it set to! +
+ +show/sun [<prefix>|<callsign>] Show
+sun rise and set times
Show the sun rise and set times for a (list of) prefixes or callsigns, +together with the azimuth and elevation of the sun currently at those +locations.
+If you don't specify any prefixes or callsigns, it will show the times for +your QTH (assuming you have set it with either SET/LOCATION or SET/QRA), +together with the current azimuth and elevation.
+If all else fails it will show the sunrise and set times for the node +that you are connected to.
+For example:-
-
+
+ SH/SUN
+ SH/SUN G1TLH K9CW ZS
+
+
+
+
+show/time [<prefix>|<callsign>] Show
+the local time
If no prefixes or callsigns are given then this command returns the local +time and UTC as the computer has it right now. If you give some prefixes +then it will show UTC and UTC + the local offset (not including DST) at +the prefixes or callsigns that you specify.
+ +show/vhfstats Show the VHF DX Statistics for last 31 days
Show the VHF DX spots breakdown by band for the last 31 days
+ +show/vhftable Show the VHF DX Spotter Table for your country
Show the VHF DX Spotter table for your country for the last 31 days
+ +show/wcy Show the last 10 WCY broadcasts
+show/wcy <n> Show the last <n> WCY broadcasts
Display the most recent WCY information that has been received by the system
+ +show/wwv Show the last 10 WWV broadcasts
+show/wwv <n> Show the last <n> WWV broadcasts
Display the most recent WWV information that has been received by the system
+ + +shutdown Shutdown the cluster
Shutdown the cluster and disconnect all the users. If you have Spider +set to respawn in /etc/inittab it will of course restart.
+ +spoof <callsign> <command> Run commands as another user
This is a very simple yet powerful command for the sysop. It allows you to +issue commands as if you were a different user. This is very useful for the +kind of things that users seem to always get wrong.. like home_node for +example.
+ +stat/db <dbname> Show the status of a database
Show the internal status of a database descriptor.
+Depending on your privilege level you will see more or less information. +This command is unlikely to be of much use to anyone other than a sysop.
+ +stat/channel <callsign> Show the status of a channel on the cluster
Show the internal status of the channel object either for the channel that +you are on or else for the callsign that you asked for.
+Only the fields that are defined (in perl term) will be displayed.
+ +stat/msg <msgno> Show the status of a message
This command shows the internal status of a message and includes information +such as to whom it has been forwarded, its size, origin etc etc.
+ +If no message number is given then the status of the message system is +displayed.
+ +You will find a file in /spider/cmd/ called Aliases. First, copy this file to -/spider/local_cmd/Aliases and edit this file. You will see something like this ... +
stat/route_node <callsign> Show the data in a Route::Node object
stat/route_user <callsign> Show the data in a Route::User object
stat/user <callsign> Show the full status of a user
Shows the full contents of a user record including all the secret flags +and stuff.
+Only the fields that are defined (in perl term) will be displayed.
+ +sysop Regain your privileges if you login remotely
The system automatically reduces your privilege level to that of a +normal user if you login in remotely. This command allows you to +regain your normal privilege level. It uses the normal system: five +numbers are returned that are indexes into the character array that is +your assigned password (see SET/PASSWORD). The indexes start from +zero.
+You are expected to return a string which contains the characters +required in the correct order. You may intersperse those characters +with others to obscure your reply for any watchers. For example (and +these values are for explanation :-):
++
+
+ password = 012345678901234567890123456789
+ > sysop
+ 22 10 15 17 3
+
+
+
+you type:-
+ aa2bbbb0ccc5ddd7xxx3n
+ or 2 0 5 7 3
+ or 20573
+
+
+
+They will all match. If there is no password you will still be offered +numbers but nothing will happen when you input a string. Any match is +case sensitive.
+ +talk <callsign> Enter talk mode with <callsign>
+talk <callsign> <text> Send a text message to <callsign>
+talk <callsign> > <node_call> [<text>]
+Send a text message to <callsign> via <node_call>
You can create aliases for commands at will. Beware though, these may not -always turn out as you think. Care is needed and you need to test the -results once you have set an alias. -
-
In later versions of Spider a simple console program is provided for the sysop. -This has a type ahead buffer with line editing facilities and colour for spots, -announces etc. To use this program, simply use console.pl instead of client.pl. -
-
To edit the colours, copy /spider/perl/Console.pl to /spider/local and edit the -file with your favourite editor. -
-
Spider has a powerful and flexible show/satellite command. In order for -this to be accurate, the kepler data has to be updated regularly. In -general, this data is available as an email or via cluster mail. -Updating it is simple. First you need to export the mail message as a -file. You do this with the export command from the cluster prompt -as the sysop. For example ... -
-
-
-export 5467 /spider/perl/keps.in
-
-
-would export message number 5467 as a file called keps.in in the -/spider/perl directory. -
Now login to a VT as sysop and cd /spider/perl. There is a command in -the perl directory called convkeps.pl. All we need to do now is -convert the file like so ... -
-
-
-./convkeps.pl keps.in
-
-
-Now go back to the cluster and issue the command ... -
-
-
-load/keps
+Send a short message to any other station that is visible on the cluster
+system. You can send it to anyone you can see with a SHOW/CONFIGURATION
+command, they don't have to be connected locally.
+The second form of TALK is used when other cluster nodes are connected
+with restricted information. This usually means that they don't send
+the user information usually associated with logging on and off the cluster.
+If you know that G3JNB is likely to be present on GB7TLH, but you can only
+see GB7TLH in the SH/C list but with no users, then you would use the
+second form of the talk message.
+If you want to have a ragchew with someone you can leave the text message
+out and the system will go into 'Talk' mode. What this means is that a
+short message is sent to the recipient telling them that you are in a 'Talking'
+frame of mind and then you just type - everything you send will go to the
+station that you asked for.
+All the usual announcements, spots and so on will still come out on your
+terminal.
+If you want to do something (such as send a spot) you precede the normal
+command with a '/' character, eg:-
+
+
+
+ /DX 14001 G1TLH What's a B class licensee doing on 20m CW?
+ /HELP talk
-That is it! the kepler data has been updated.
+
+To leave talk mode type:
-
11.7 The QRZ callbook
+
+
+ /EX
+
+
+
+
+11.166 type (0)
-
The command sh/qrz will only work once you have followed a few
-simple steps. First you need to get a user ID and password from qrz.com.
-Simply go to the site and create one. Secondly you need to copy the file
-/spider/perl/Internet.pm to /spider/local and alter it to match your user
-ID and password. You also at this point need to set $allow=1 to complete
-the setup. Many thanks to Fred Lloyd, the proprieter of
-qrz.com for allowing this access.
+
type <filearea>/<name> Look at a file in one of the fileareas
+
+Type out the contents of a file in a filearea. So, for example, in
+filearea 'bulletins' you want to look at file 'arld051' you would
+enter:-
+
+
+ TYPE bulletins/arld051
+
+
+
+See also SHOW/FILES to see what fileareas are available and a
+list of content.
+
+11.167 who (0)
+
+
+who Show who is physically connected locally
+
+This is a quick listing that shows which callsigns are connected and
+what sort of connection they have
+
+11.168 wx (0)
+
+
+wx <text> Send a weather message to local users
+wx full <text> Send a weather message to all cluster users
+
+Weather messages can sometimes be useful if you are experiencing an extreme
+that may indicate enhanced conditions
+
+11.169 wx (enhanced for sysops) (5)
+
+
+wx sysop <text> Send a weather message to other clusters only
+
+Send a weather message only to other cluster nodes and not to general users.
+
+
+
-Next
+Next
Previous
Contents