X-Git-Url: http://dxcluster.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=html%2Fconnect.html;h=76ec9df48552aad974da50227104d91536ac13d2;hb=b8ff94755eecda16276c449274c6a76c4f14a8d1;hp=d22d22f4d8c55b081bc942bf63d30b5dc2fed5b1;hpb=439f25ba04e8c4ddbd6806f31da58c0939e2c868;p=spider.git diff --git a/html/connect.html b/html/connect.html index d22d22f4..76ec9df4 100644 --- a/html/connect.html +++ b/html/connect.html @@ -5,6 +5,7 @@ +
@@ -19,7 +20,7 @@-Last modified: Fri Jan 8 14:27:18 GMT 1999 +Last modified: Tue Apr 10 00:21:34 BST 2001
At the moment, anybody can connect inwards at any time from outside, either by ax25 or by telnet (assuming you have followed the instructions in installation @@ -55,24 +56,36 @@ Last modified: Fri Jan 8 14:27:18 GMT 1999 # confuse whole networks for hours! '\$' 'stty -echo raw' # tell GB7DJK that you are GB7DJK-1 - '\$' 'client.pl gb7djk-1 telnet' + '\$' '/spider/src/client gb7djk-1 telnet' # tell GB7DJK-1 that it is connected to GB7DJK # you can leave this out if you call this script 'gb7djk' client gb7djk telnet -
and finally an ax25 example:- +
a ax25 example:-
timeout 60 abort (Busy|Sorry|Fail) # don't forget to chmod 4775 netrom_call! - connect ax25 /usr/sbin/netrom_call bbs gb7djk g1tlh + connect ax25 /usr/sbin/netrom_call bbs gb7djk-0 g1tlh-0 + 'Connect' '' + 'Connect' 'c np7' + 'Connect' 'c gb7dxm' + 'Connect' '' ++ + The -0 ssid is important if you want it to work reliably. Obviously if you are + using a different ssid then you would use that. + +
A AGW Engine example would be very similar and look like this:- +
+ timeout 60 + abort (Busy|Sorry|Fail) + connect agw 2 g1tlh 'Connect' '' 'Connect' 'c np7' 'Connect' 'c gb7dxm' 'Connect' '' - # you can leave this out if you call the script 'gb7dxm' - client gb7dxm ax25
A connection is started manually by typing in connect <scriptname> on a sysop enabled @@ -83,7 +96,8 @@ Last modified: Fri Jan 8 14:27:18 GMT 1999 G1TLH de GB7DJK 13-Dec-1998 2043Z > -
You can watch the progress of the connection (if you have the standard debugging enabled) on the +
You can watch the progress of the connection (if you have connect + debugging enabled [set/debug connect]) on the cluster.pl screen and you should see something like this:-
<- D G1TLH connect gb7djk-1 @@ -120,20 +134,25 @@ Last modified: Fri Jan 8 14:27:18 GMT 1999
In the case of a telnet connection, there can be up to two parameters, the first is the ip address or hostname of the computer you wish to connect to and the second is the port number you want @@ -141,12 +160,16 @@ Last modified: Fri Jan 8 14:27:18 GMT 1999 session).
In the case of an ax25 session then this would - normally be a call to ax25_call or - netrom_call as in the example above. It is your + normally be a call to /usr/sbin/ax25_call or + /usr/sbin/netrom_call as in the example above. It is your responsibility to get your node and other ax25 parameters to work before going down this route! -
For agw connections you will need a port number (starting
+ from 1) and the callsign of the first "hop" along the way.
+
+
+
This process is repeated for every line of chat script.
+
-