X-Git-Url: http://dxcluster.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=sgml%2Fadminmanual.sgml;h=f075b7988bb9a35e03316d921e811fe9350b3e60;hb=47bc13ac2b52dd67972c24017d7f6a41ac601611;hp=5665f17e3ee84f803561be3697c8d61392009e52;hpb=e674587476599456cce169e02b0e441d985f9dd8;p=spider.git diff --git a/sgml/adminmanual.sgml b/sgml/adminmanual.sgml index 5665f17e..f075b798 100644 --- a/sgml/adminmanual.sgml +++ b/sgml/adminmanual.sgml @@ -4,9 +4,10 @@ -
-This section describes the installation of DX Spider v1.35 on a
-
-I am assuming a general knowledge of Linux and its commands. You should
-know how to use tar and how to edit files using your favourite editor.
-
-
-The crucial ingredient for all of this is
- In addition to the standard Red Hat distribution you will require the
-following
-
-
-Do get the latest versions of these packages and install them
-but use the above list as the earliest versions usable.
-
-
-I will assume that you have already downloaded the latest tarball of
-the DXSpider software and are ready to install it. I am assuming version
-1.35 for this section but of course you would use the latest version.
-
-
-Login as root and create a user to run the cluster under.
-
-Now set a password for the user ...
-
-
-Now to unpack the DX Spider distribution, set symbolic links and group
-permissions. Copy the tarball to /home/sysop and do the following.
-
-
-The next step is to set the permissions on the Spider directory tree and files ....
-
-
-This last step allows various users of the group spider to have
-write access to all the directories. This is not really needed just yet
-but will be useful when web interfaces start to appear.
-
-
-Finally, you need to fix the permissions on the ax25_call and netrom_call
-programs. Check where they are with the locate command and alter
-the permissions with the chmod command like this ..
-
-
-Now login to your machine as the user you created earlier. In my case that
-user is called sysop. Once logged in, issue the following commands ....
-
-
-Using the distributed DXVars.pm as a a template, set your cluster callsign,
-sysop callsign and other user info to suit your own environment. Note that
-this a perl file which will be parsed and executed as part of the cluster. If
-you get it wrong then perl will complain when you start the cluster process.
-It is important only to alter the text of any section. Some of the lines look
-a little odd. Take this line for example ....
-
-
-$myemail = "ianmaude\@btinternet.com";
-
-
-
-There appears to be an extra slash in there. However this has to be there
-for the file to work so leave it in.
-
-
-DON'T alter the DXVars.pm (or any other file) in /spider/perl, they are
-overwritten with every release. Any files or commands you place in /spider/local
-or /spider/local_cmd will automagically be used in preference to the ones in
-/spider/perl EVEN while the cluster is running!
-
-
-Save the new file and change directory to ../perl ....
-
-
-Now type the following command which creates the basic user file with you as
-the sysop.
-
-
-We can now bring spider up for the first time and see if all is well or not!
-It should look something like this ...
-
-
-If all is well then login on another term or console as sysop and
-cd to /spider/perl. Now issue the following command ...
-
-
-This should log you into the cluster as the sysop under the alias callsign we
-set earlier. In this case the callsign is G0VGS. The cluster callsign is set
-in the DXVars.pm file in /spider/local. In this case we will assume that this
-was set as GB7MBC. You should therefore see this when you login ....
-
-
-and both the cluster and the client should return to Linux prompts.
-
-
-In earlier versions of Spider, all the processes were Perl scripts. This
-was fine but with a lot of users your computer memory would soon be used up.
-To combat this a new client was written in "C". This client only works for
-incoming connects at the moment. Before you can use it though it
-has to be "made". CD to /spider/src and type make. You
-should see the output on your screen and hopefully now have a small C program
-called client. Leave it in this directory.
-
-
-As stated previously, the aim of this document is not to tell you how to
-configure Linux or the ax25 utilities. However, you do need to add a line
-in your ax25d.conf to allow connections to DXSpider for your users. For
-each interface that you wish to allow connections on, use the following format ...
-
-
-Allowing telnet connections is quite simple. Firstly you need to add a line
-in /etc/services to allow connections to a port number, like this ....
-
-
-This needs to be added above the standard services such as ftp, telnet etc.
-Once this is done, you need to restart inetd like this ....
-
- Now login as sysop and cd spider/perl. You can test that spider
-is accepting telnet logins by issuing the following command ....
-
-
-Assuming all is well, then try a telnet from your linux console ....
-
-
-You should now get the login prompt and be able to login as before.
-
-
-In order to allow cluster node connections, spider needs to know that the
-connecting callsign is a cluster node. This is the case whether the connect
-is incoming or outgoing. In spider this is a simple task and can be done in
-runtime.
-
-
-Later versions of Spider can distinguish different software and treat them
-differently. For example, the WCY beacon cannot be handles by AK1A type
-nodes as AK1A does not know what to do with PC73. There are 4 different
-types of node at present and although they may not have any major
-differences at the moment, it allows for compatibility. The 4 types are ...
-
-
-For now, we will assume that the cluster we are going to connect to is an
-AK1A type node.
-
-
-Start up the cluster as you did before and login as the sysop with client.pl.
-The cluster node I am wanting to make a connection to is GB7BAA but you would
-obviously use whatever callsign you required. At the prompt type ...
-
-
-The case does not matter as long as you have a version of DXSpider later than
-1.33. Earlier versions required the callsign to be in upper case.
-
-
-That is now set, it is as simple as that. To prove it, login on yet another
-console as sysop and issue the command ...
-
-
-You should get an initialisation string from DXSpider like this ...
-
-
-Because DXSpider operates under Linux, connections can be made using just about
-any protocol; AX25, NETRom, tcp/ip, ROSE etc are all possible examples.
-Connect scripts live in the /spider/connect directory and are simple ascii files.
-Writing a script for connections is therefore relatively simple.
-
-
-The connect scripts consist of lines which start with the following keywords
-or symbols:-
-
-
-
-
-Both these examples assume that everything is set up properly at the other end.
-You will find other examples in the /spider/examples directory.
-
-
-You start the connection, from within a sysop enabled cluster login, by typing
-in the word connect followed by a script name like this ....
-
-
-With later versions of Spider there is a set/login command for users. This
-tells them when a user or node logs in or out. If you do not add a line to
-your scripts after the final line (or before the client line which should always
-be last if needed) then the login/logout information will be sent to users
-
-In a script, this might look like ...
-
-
-Cluster links in particular suffer greatly from the presence of telnet echo.
-This is caused by the telnet negotiation itself and can create at worst severe
-loops. At best it creates unnecessary bandwidth and large logfiles! There are
-things that can be done to limit this problem but will not always work dependent
-on the route taken to connect.
+From DXSpider version 1.48, major changes were introduced to the way
+node connections are treated. This is part of an ongoing process to
+remove problems with loops and to enable talk and other functions to
+propagate across the whole of the worldwide cluster network. In fact,
+in a Spider network, it would be useful, perhaps even necessary to
+have loops. This would give real resilience to the network, meaning
+that if a link dropped, the information flow would simply come in and
+go out via a different route. Of course, we do not have a complete
+network of Spider nodes, there are other programs out there. Some of
+these do not have any protection from loops. Certainly AK1A does not
+handle loops well at all. It is therefore necessary to have some form
+of protection for these nodes.
+
+
+In fact DXSpider has had a simple system for some time which is called
+
+The new functionality introduced in version 1.48 allows filtering the node
+and user protocol frames on a "per interface" basis. We call this
+
+What this really means is that you can control more or less completely
+which user and node management PC protocol frames pass to each of your
+partner nodes. You can also limit what comes into your node from your
+partners. It is even possible to control the settings that your partner
+node has for the routing information that it sends to you
+(using the
+Initially when route filters were being tested we generated a
+"default" filter. Unfortunately it quickly became apparent that this
+might suit the UK cluster network but didn't really fit anybody else.
+However using a default filter is an appropriate thing to do. How, is
+explained further on.
+
+
+The first thing that you must do is determine whether you need to use
+route filtering
+To put it simply, you should not mix Isolation and Route Filtering. It
+will work, of sorts, but you will not get the expected results. If you
+are using Isolation sucessfully at the moment, do not get involved in
+Route Filtering unless you have a good supply of aspirin! Once you have
+started down the road of Route Filtering, do not use Isolation either.
+Use one or the other, not both.
+
+
+You will only require this functionality if you are "well-connected". What
+that means is that you are connected to several different parts of (say)
+the EU cluster and, at the same time, also connected to two or three places
+in the US which, in turn are connected back to the EU. This is called a
+"loop" and if you are seriously looped then you need filtering.
+
+
+I should at this stage give a little bit of background on filters. All
+the filters in Spider work in basically the same way. You can either
+accept or reject various options in order to create the filter rules
+you wish to achieve. Some filters are user settable, others can only
+be altered by the sysop. Route filtering can only be done by the sysop.
+
+
+Anyway, without further discouragement, let me start the process
+of explanation.
+
+
+All normal systems should have a default routing filter and it should
+usually be set to send only the normal, unlooped, view of your
+"national" network. Here in the UK that means nodes from the UK and
+Eire, in EU it is more complex as the networks there grew up in a more
+intertwined way.
+
+
+The generic commands are:-
+
+
-Telnet echo itself should only be a problem if the connection is being made to
-the telnet port (23). This port uses special rules that include echo negotiation.
-If the connection is to a different port, such as 8000, this negotiation does
-not happen and therefore no echo should be present.
-
-
-Sometimes it is not possible to make a direct connection to another node and this
-can cause problems. There is a way of trying to suppress the telnet echo but
-this will not always work, unfortunately it is difficult to be more specific.
-Here is an example of what I mean ...
-
-
-Ok, you should now have DXSpider running nicely and allowing connects by cluster
-nodes or users. However, it has to be shutdown and restarted manually and if
-connection scripts fail they have to be started again manually too, not much use
-if you are not at the console! So, in this section we will automate both.
-Firstly starting the cluster.
-
-
-This is not only a way to start the cluster automatically, it also works as a
-watchdog, checking the sanity of DXSpider and respawning it should it crash for
-any reason. Before doing the following, shutdown the cluster as you did earlier.
-
-
-Login as root and bring up the /etc/inittab file in your favourite editor. Add
-the following lines to the file near the end ...
-
-
-This line works fine for RedHat and SuSE distributions. The line required for
-Slackware distributions is slightly different. My thanks to Aurelio, PA3EZL for
-this information.
+or
-
-This will automatically start DXSpider on tty7 (ALT-F7) on bootup and restart
-it should it crash for any reason.
-
-
-As root type the command telinit q. DXSpider should start up
-immediately. You will see the output on tty7 and if you login as sysop
-you should find everything running nicely.
-
-
-So far so good, now to automate script connections...
-
-
-Login as sysop and create a file in /spider/local_cmd called crontab.
-Edit it with your favourite editor and add a line like this (I have included
-a comment)
+where filter_option is one of the following ...
-The callsign involved will be the callsign of the cluster node you are
-going to connect to. This will now check every 10 minutes to see if
-gb7xxx is connected, if it is then nothing will be done. If it is not,
-then a connect attempt will be started.
-
-
-There are probably lots of other things you could use this crontab file for.
-If you want to know more about it, look at the
-
-Starting with version 1.13 there is simple hop control available on a per
-node basis. Also it is possible to isolate a network completely so that you
-get all the benefits of being on that network, but can't pass on information
-from it to any other networks you may be connected to (or vice versa).
+Please be careful if you alter this setting, it will affect
+
-In /spider/data you will find a file called hop_table.pl. This is the file
-that controls your hop count settings. It has a set of default hops on the
-various PC frames and also a set for each node you want to alter the hops for.
-You may be happy with the default settings of course, but this powerful tool
-can help to protect and improve the network. The file will look something
-like this ...
+
+For the default routing filter then you have two real choices: either
+a "national" view or the "safe" option of only your own
+callsign. Examples of each (for my node: GB7DJK) are:-
-Each set of hops is contained within a pair of curly braces and contains a
-series of PC frame types. PC11 for example is a DX spot. The figures here
-are not exhaustive but should give you a good idea of how the file works.
-
-
-You can alter this file at any time, including whilst the cluster is running.
-If you alter the file during runtime, the command load/hops will
-bring your changes into effect.
-
-
-It is possible to isolate networks from each other on a "gateway" node using the
- set/isolate <node_call> command.
-
-
-The effect of this is to partition an isolated network completely from another
-nodes connected to your node. Your node will appear on and otherwise behave
-normally on every network to which you are connected, but data from an isolated
-network will not cross onto any other network or vice versa. However all the
-spot, announce and WWV traffic and personal messages will still be handled
-locally (because you are a real node on all connected networks), that is locally
-connected users will appear on all networks and will be able to access and
-receive information from all networks transparently. All routed messages will
-be sent as normal, so if a user on one network knows that you are a gateway for
-another network, he can still still send a talk/announce etc message via your
-node and it will be routed across.
+GB7DJK uses the first of these. The DXCC countries can be obtained from the
+
-The only limitation currently is that non-private messages cannot be passed down
-isolated links regardless of whether they are generated locally. This will change
-when the bulletin routing facility is added.
+
+The example filters shown control
-If you use isolate on a node connection you will continue to receive all
-information from the isolated partner, however you will not pass any information
-back to the isolated node. There are times when you would like to forward only
-spots across a link (maybe during a contest for example). To do this, isolate
-the node in the normal way and put in a filter in the /spider/filter/spots
-directory to override the isolate. This filter can be very simple and consists
-of just one line ....
+
+It is also possible to control the
-There is a lot more on filtering in the next section.
-
-
-Filters can be set for spots, announcements and WWV. You will find the
-directories for these under /spider/filter. You will find some examples in
-the directories with the suffix .issue. There are two types of
-filter, one for incoming information and one for outgoing information.
-Outgoing filters are in the form CALLSIGN.pl and incoming filters
-are in the form in_CALLSIGN.pl. Filters can be set for both nodes
-and users.
-
-
-All filters work in basically the same way. There are several elements
-delimited by commas. There can be many lines in the filter and they are
-read from the top by the program. When writing a filter you need to think
-carefully about just what you want to achieve. You are either going to write
-a filter to accept or to reject. Think of a filter as
-having 2 main elements. For a reject filter, you would have a line or multiple
-lines rejecting the things you do not wish to receive and then a default line
-accepting everything else that is not included in the filter. Likewise, for an
-accept filter, you would have a line or multiple lines accepting the things you
-wish to receive and a default line rejecting everthing else.
-
-
-In the example below, a user requires a filter that would only return SSB spots
-posted in Europe on the HF bands. This is achieved by first rejecting the CW
-section of each HF band and rejecting all of VHF, UHF etc based on frequency.
-Secondly, a filter rule is set based on CQ zones to only accept spots posted in
-Europe. Lastly, a default filter rule is set to reject anything outside the filter.
+
+As I imagine it will take a little while to get one's head around all of
+this you can study the effect of any rules that you try by watching the
+debug output after having done:-
-The actual elements of each filter are described more fully in the following
-sections.
-
-
-The elements of the Spot filter are ....
+After you have got tired of that, to put it back the way it was:-
-There are 3 elements here to look at. Firstly, the action element. This is
-very simple and only 2 possible states exist, accept (1) or drop (0).
-
-
-The second element is the field_no. There are 13 possiblities to choose from
-here ....
-
-
-The third element tells us what to expect in the fourth element. There are
-4 possibilities ....
+Exactly the same rules apply for general route filtering. You would
+use either an accept filter or a reject filter like this ...
-The fifth element is simply the hops to set in this filter. This would only
-be used if the filter was for a node of course and overrides the hop count in
-hop_table.pl.
-
-
-So, let's look at an example spot filter. It does not matter in the example
-who the filter is to be used for. So, what do we need in the filter? We need
-to filter the spots the user/node requires and also set a default rule for
-anything else outside the filter. Below is a simple filter that stops spots
-arriving from outside Europe.
+or
-
-So the filter is wrapped in between a pair of square brackets. This tells
-Spider to look in between these limits. Then each line is contained within
-its own square brackets and ends with a comma. Lets look carefully at the first
-line. The first element is 0 (drop). Therefore anything we put on this line
-will not be accepted. The next element is 4. This means we are filtering by
-the spotter. The third element is the letter "a" which tells the program to
-expect an alphanumeric expression in the fourth element. The fourth element
-is a list of letters separated by the pipe symbol.
-
-
-What this line does is tell the program to drop any spots posted by anyone in
-the USA, Canada or Japan.
-
-
-The second line is the default rule for anything else. The "d" tells us this
-and the line simply reads... accept anything else.
-
-
-You can add as many lines as you need to complete the filter but if there are
-several lines of the same type it is neater to enclose them all as one line.
-An example of this is where specific bands are set. We could write this like
-this ....
+Here are some examples of route filters ...
-But the line below achieves the same thing and is more efficient ....
-
+In practice you will either be opening the default filter out for a
+partner by defining a specific filter for that callsign:-
+
-
-It should be noted that the filter will start to be used only once a user/node
-has logged out and back in again.
-
-I am not going to spend any more time on these filters now as they will become
-more "comprehensive" in the near future.
+
+It is possible to write
-In general terms you can create a 'reject' or an 'accept' filter which can have
+In general terms you can create a "reject" or an "accept" filter which can have
up to 10 lines in it. You do this using, for example ...
+You can filter in several different ways. The options are listed in the
+various helpfiles for accept, reject and filter.
+
+
+Sometimes all that is needed is a general rule for node connects. This can
+be done with a node_default filter. This rule will always be followed, even
+if the link is isolated, unless another filter is set specifically. Default
+rules can be set for nodes and users. They can be set for spots, announces,
+WWV and WCY. They can also be used for hops. An example might look like
+this ...
+
+
+Once you are happy with the results you get, you may like to experiment.
+
+
+The previous example that filters hf/cw spots and accepts vhf/uhf spots from EU
+can be written with a mixed filter, for example ...
+
+
+It was mentioned earlier that after a reject test that doesn't match, the default
+for following tests is 'accept', the reverse is true for 'accept'. In the example
+what happens is that the reject is executed first, any non hf/cw spot is passed
+to the accept line, which lets through everything else on HF. The next filter line
+lets through just VHF/UHF spots from EU.
+
+
+In /spider/data you will find a file called hop_table.pl. This is the file
+that controls your hop count settings. It has a set of default hops on the
+various PC frames and also a set for each node you want to alter the hops for.
+You may be happy with the default settings of course, but this powerful tool
+can help to protect and improve the network. The file will look something
+like this ...
+
+
+Each set of hops is contained within a pair of curly braces and contains a
+series of PC frame types. PC11 for example is a DX spot. The figures here
+are not exhaustive but should give you a good idea of how the file works.
-You can filter in several different ways. The options are listed in the
-various helpfiles for accept, reject and filter.
+You can alter this file at any time, including whilst the cluster is running.
+If you alter the file during runtime, the command load/hops will
+bring your changes into effect.
-
-Sometimes all that is needed is a general rule for node connects. This can
-be done with a node_default filter. This rule will always be followed, even
-if the link is isolated, unless another filter is set specifically. Default
-rules can be set for nodes and users. They can be set for spots, announces,
-WWV and WCY. They can also be used for hops. An example might look like
-this ...
+ You can set a callsign specific hop count for any of the standard filter
+options so:-
+The set/hops command overrides any hops that you have set otherwise.
-
+You can set what hops have been set using the show/hops command.
-
-Once you are happy with the results you get, you may like to experiment.
+
-The previous example that filters hf/cw spots and accepts vhf/uhf spots from EU
-can be written with a mixed filter, for example ...
-
-
-It was mentioned earlier that after a reject test that doesn't match, the default
-for following tests is 'accept', the reverse is true for 'accept'. In the example
-what happens is that the reject is executed first, any non hf/cw spot is passed
-to the accept line, which lets through everything else on HF. The next filter line
-lets through just VHF/UHF spots from EU.
+The effect of this is to partition an isolated network completely from another
+node connected to your node. Your node will appear on and otherwise behave
+normally on every network to which you are connected, but data from an isolated
+network will not cross onto any other network or vice versa. However all the
+spot, announce and WWV traffic and personal messages will still be handled
+locally (because you are a real node on all connected networks), that is locally
+connected users will appear on all networks and will be able to access and
+receive information from all networks transparently. All routed messages will
+be sent as normal, so if a user on one network knows that you are a gateway for
+another network, he can still still send a talk/announce etc message via your
+node and it will be routed across.
+
+If you use isolate on a node connection you will continue to receive
+all information from the isolated partner, however you will not pass
+any information back to the isolated node. There are times when you
+would like to forward only spots across a link (maybe during a contest
+for example). To do this, isolate the node in the normal way and use
+an acc/spot >call< all filter to override the isolate.
-
-In the same way as mail, there are some types of spot we do not wish to pass on
-to users or linked cluster nodes. In the /spider/data directory you will find
-a file called baddx.pl.issue. Rename this to baddx.pl and edit the file. The
-original looks like this ....
+
+From version 1.48 onwards the interface to this has changed. You can now
+use the commands set/badword to add words that you are not prepared
+to see on the cluster, unset/badword to allow that word again and
+show/badword to list the words that you have set.
-
+If you have a previous /spider/data/badwords, the first time you start
+the node, it will read and convert this file to the new commands. The old style
+file will then be removed.
-# the list of dx spot addresses that we don't store and don't pass on
+
+There are a number of commands that control whether a spot progresses
+any further by regarding it as "bad" in some way.
-package DXProt;
+
+A DX Spot has a number of fields which can be checked to see whether they
+contain "bad" values, they are: the DX callsign itself, the Spotter and
+the Originating Node.
-@baddx = qw
-
- FROG
- SALE
- FORSALE
- WANTED
- P1RATE
- PIRATE
- TEST
- DXTEST
- NIL
- NOCALL
-);
-
+There are a set of commands which allow the sysop to control whether a
+spot continues:-
-
-Again, this is simply a list of names we do not want to see in the spotted
-field of a DX callout.
+
-Create a file in /spider/data called badwords. The format is quite
-simple. Lines beginning with # are ignored so comments can be added. An
-example file is below ...
+a bad spotter:
-You can reload the file from the cluster prompt as sysop with load/badwords.
+
+From 1.48 onwards it will become increasingly possible to control DXSpider's
+operation with scripts of various kinds.
+
+
+In the first instance, in 1.48, the sysop can create, with their favorite
+text editor, files in the directory /spider/scripts which contain
+any legal command for a callsign or class of connection which will be executed
+at logon.
+
+
+The filename is the callsign of the connection that you want the script to
+operate on, eg: /spider/scripts/g1tlh. The filenames are always in
+lower case on those architectures where this makes a difference.
+
+
+In addition to the callsign specific scripts there are three others:-
+
+
+The user_default script is executed for every user that does
+
+The node_default script is executed for every node that doesn't
+have a specific script.
+
+
+There are a couple of examples in the /spider/scripts directory.
+
@@ -1678,13 +1079,13 @@ You can also store other information in this directory, either directly or
nested under directories. One use for this would be to store DX bulletins
such as the OPDX bulletins. These can be listed and read by the user.
To keep things tidy, make a directory under /spider/packclus called
-bulletins. Now copy any OPDX or similar bulletins into it. These
+bulletin. Now copy any OPDX or similar bulletins into it. These
can be listed by the user in the same way as above using the show/files
-command with an extension for the bulletins directory you have just created,
+command with an extension for the bulletin directory you have just created,
like this ....
@@ -1692,11 +1093,11 @@ An example would look like this ....
In later versions of Spider a simple console program is provided for the sysop.
This has a type ahead buffer with line editing facilities and colour for spots,
-announces etc. To use this program, simply use console.pl instead of client.pl.
+announces etc. To use this program, simply use console.pl instead of client.
To edit the colours, copy /spider/perl/Console.pl to /spider/local and edit the
@@ -1957,14 +1358,9 @@ that it is possible to update your DXSpider installation to the latest
sources by using a few simple commands.
-THIS IS NOT FOR THE FAINT HEARTED!!! ONLY DO THIS IF YOU HAVE A TEST
-INSTALLATION OR ARE WILLING TO HAVE YOUR CLUSTER CRASH ON YOU!!!
-THIS MUST BE CONSIDERED AT LEAST BETA TESTING AND MAYBE EVEN ALPHA!!
-YOU HAVE BEEN WARNED!!!
-
-
-DID I MENTION..... ONLY DO THIS IF YOU ARE WILLING TO ACCEPT THE
-CONSEQUENCES!!!
+Please be aware that if you update your system using CVS, it is possible that
+you could be running code that is very beta and not fully tested. There is
+a possibility that it could be unstable.
I am of course assuming that you have a machine with both DXSpider and
@@ -2140,6 +1536,50 @@ default for nodes and users eg:-
accept/ann user_default by G,M,2
+
+
+Create an 'accept this routing PC Protocol' line for a filter.
+
+
+An accept filter line means that if a PC16/17/19/21/24/41/50 matches this filter
+it is passed thru that interface. See HELP FILTERING for more info. Please read this
+to understand how filters work - it will save a lot of grief later on.
+
+
+You can use any of the following things in this line:-
+
+
+some examples:-
+
+
+You can use the tag 'all' to accept everything eg:
+
+
@@ -2326,7 +1766,9 @@ default for nodes and users eg:-
Send an announcement to LOCAL users only, where <text> is the text
-of the announcement you wish to broadcast
+of the announcement you wish to broadcast. If you do not wish to receive
+announces, use the set/noannounce command. Any announces made by
+a sysop will override set/noannounce.
-
-
-Reload the /spider/data/baddx.pl file if you have changed it manually whilst
-the cluster is running. This table contains the DX Calls that, if spotted,
-will not be passed on. FR0G and TEST are classic examples.
-
@@ -2901,21 +2330,6 @@ the cluster is running. This table contains a number of perl regular
expressions which are searched for in the fields targetted of each message.
If any of them match then that message is immediately deleted on receipt.
-
-
-
-Reload the /spider/data/badwords file if you have changed it manually whilst
-the cluster is running. This file contains a list of words which, if found
-on certain text portions of PC protocol, will cause those protocol frames
-to be rejected. It will all put out a message if any of these words are
-used on the announce, dx and talk commands. The words can be one or
-more on a line, lines starting with '#' are ignored.
-
@@ -3165,6 +2579,47 @@ default for nodes and users eg:-
reject/ann user_default by G,M,2
+
+
+Create an 'reject this routing PC Protocol' line for a filter.
+
+
+An reject filter line means that if a PC16/17/19/21/24/41/50 matches this filter
+it is NOT passed thru that interface. See HELP FILTERING for more info. Please
+read this to understand how filters work - it will save a lot of grief later on.
+You can use any of the following things in this line:-
+
+
+some examples:-
+
+
+You can use the tag 'all' to reject everything eg:
+
+
@@ -3515,6 +2970,13 @@ Use with extreme care. This command may well be superceded by FILTERing.
Add a beep to DX and other terminal messages.
+
+
+
@@ -3534,7 +2996,18 @@ Set the node_call as a CLX type node
-You can remove this level with unset/debug <name>
+You can choose to log several different levels. The levels are
+
+chan
+state
+msg
+cron
+connect
+
+You can show what levels you are logging with the show/debug
+command.
+
+You can remove a debug level with unset/debug <name>
-
Display all the bad spotter's callsigns in the system, see SET/BADSPOTTER
for more information.
+
+
+
+This command allows you to see all the users that can be seen
+and the nodes to which they are connected. With the optional node,
+you can specify a particular node to look at.
+
+This command is normally abbreviated to: sh/c
+
+BE WARNED: the list that is returned can be VERY long
+
+
+
+
+Show all the nodes connected locally and the nodes they have connected.
+
+
+
+
+This command shows information on all the active connections known to
+the node. This command gives slightly more information than WHO.
+
@@ -4006,6 +3516,16 @@ time and UTC as the computer has it right now. If you give some prefixes
then it will show UTC and UTC + the local offset (not including DST) at
the prefixes or callsigns that you specify.
+
+
+
+The levels can be set with set/debug
+
@@ -4548,6 +4068,24 @@ Only the fields that are defined (in perl term) will be displayed.
This command shows the internal status of a message and includes information
such as to whom it has been forwarded, its size, origin etc etc.
+
+If no message number is given then the status of the message system is
+displayed.
+
+
+
+
+
+