]> dxcluster.org Git - spider.git/commitdiff
fix a few Log/Dbg thingies.
authorminima <minima>
Mon, 9 Jan 2006 20:46:47 +0000 (20:46 +0000)
committerminima <minima>
Mon, 9 Jan 2006 20:46:47 +0000 (20:46 +0000)
remove all references to QXProt.pm

perl/DXCommandmode.pm
perl/DXUser.pm
perl/QXProt.pm [deleted file]
perl/QXProt/QXI.pm [deleted file]
perl/QXProt/QXP.pm [deleted file]
perl/QXProt/QXR.pm [deleted file]
perl/cluster.pl

index 89efeb4b6aba41598f6090fb50b99f05524f0c92..404a7391af2c6bc59d76b28936cc0cc0b2d98720 100644 (file)
@@ -93,7 +93,7 @@ sub start
        my $host = $self->{conn}->{peerhost};
        $host ||= "AGW Port #$self->{conn}->{agwport}" if exists $self->{conn}->{agwport};
        $host ||= "unknown";
-       Log('DXCommand', "$call connected from $host");
+       LogDbg('DXCommand', "$call connected from $host");
 
        $self->{name} = $name ? $name : $call;
        $self->send($self->msg('l2',$self->{name}));
@@ -562,7 +562,7 @@ sub disconnect
        # send info to all logged in thingies
        $self->tell_login('logoutu');
 
-       Log('DXCommand', "$call disconnected");
+       LogDbg('DXCommand', "$call disconnected");
 
        $self->SUPER::disconnect;
 }
@@ -1026,8 +1026,7 @@ sub import_cmd
        # are there any to do in this directory?
        return unless -d $cmdimportdir;
        unless (opendir(DIR, $cmdimportdir)) {
-               dbg("can\'t open $cmdimportdir $!");
-               Log('err', "can\'t open $cmdimportdir $!");
+               LogDbg('err', "can\'t open $cmdimportdir $!");
                return;
        } 
 
@@ -1039,9 +1038,7 @@ sub import_cmd
 
                my $s = Script->new($name, $cmdimportdir);
                if ($s) {
-
-                       dbg("Run import cmd file $name");
-                       Log('DXCommand', "Run import cmd file $name");
+                       LogDbg('DXCommand', "Run import cmd file $name");
                        my @cat = split /[^A-Za-z0-9]+/, $name;
                        my ($call) = grep {is_callsign(uc $_)} @cat;
                        $call ||= $main::mycall;
@@ -1072,19 +1069,16 @@ sub import_cmd
                                                $dxchan->{priv} = $priv;
                                                $dxchan->{user} = $user;
                                        } else {
-                                               Log('err', "Trying to run import cmd for non-existant user $call");
-                                               dbg( "Trying to run import cmd for non-existant user $call");
+                                               LogDbg('err', "Trying to run import cmd for non-existant user $call");
                                        }
                                }
                        }
                        $s->erase;
                        for (@out) {
-                               Log('DXCommand', "Import cmd $name/$call: $_");
-                               dbg("Import cmd $name/$call: $_");
+                               LogDbg('DXCommand', "Import cmd $name/$call: $_");
                        }
                } else {
-                       Log("Failed to open $cmdimportdir/$name $!");
-                       dbg("Failed to open $cmdimportdir/$name $!");
+                       LogDbg('err', "Failed to open $cmdimportdir/$name $!");
                        unlink "$cmdimportdir/$name";
                }
        }
index adddce0a4cef1f5701536e8d361530cc303f6244..6e2c014e80febe2efcd84be9afc6d08b9a67da3e 100644 (file)
@@ -344,8 +344,7 @@ sub asc_decode
        my $ref;
        eval '$ref = ' . $s;
        if ($@) {
-               dbg($@);
-               Log('err', $@);
+               LogDbg('err', $@);
                $ref = undef;
        }
        return $ref;
@@ -492,7 +491,7 @@ print "There are $count user records and $err errors\n";
                                my $ekey = $key;
                                $eval =~ s/([\%\x00-\x1f\x7f-\xff])/sprintf("%%%02X", ord($1))/eg; 
                                $ekey =~ s/([\%\x00-\x1f\x7f-\xff])/sprintf("%%%02X", ord($1))/eg; 
-                               Log('DXCommand', "Export Error1: $ekey\t$eval");
+                               LogDbg('DXCommand', "Export Error1: $ekey\t$eval");
                                eval {$dbm->del($key)};
                                dbg(carp("Export Error1: $ekey\t$eval\n$@")) if $@;
                                ++$err;
@@ -505,7 +504,7 @@ print "There are $count user records and $err errors\n";
                                        unless ($ref->{lat} && $ref->{long} || $ref->{qth} || $ref->{qra}) {
                                                eval {$dbm->del($key)};
                                                dbg(carp("Export Error2: $key\t$val\n$@")) if $@;
-                                               Log('DXCommand', "$ref->{call} deleted, too old");
+                                               LogDbg('DXCommand', "$ref->{call} deleted, too old");
                                                $del++;
                                                next;
                                        }
@@ -514,7 +513,7 @@ print "There are $count user records and $err errors\n";
                                print $fh "$key\t" . $ref->asc_encode . "\n";
                                ++$count;
                        } else {
-                               Log('DXCommand', "Export Error3: $key\t$val");
+                               LogDbg('DXCommand', "Export Error3: $key\t$val");
                                eval {$dbm->del($key)};
                                dbg(carp("Export Error3: $key\t$val\n$@")) if $@;
                                ++$err;
diff --git a/perl/QXProt.pm b/perl/QXProt.pm
deleted file mode 100644 (file)
index b9cf952..0000000
+++ /dev/null
@@ -1,246 +0,0 @@
-#
-# This module impliments the new protocal mode for a dx cluster
-#
-# Copyright (c) 2001 Dirk Koopman G1TLH
-#
-# $Id$
-# 
-
-package QXProt;
-
-@ISA = qw(DXChannel DXProt);
-
-use DXUtil;
-use DXChannel;
-use DXUser;
-use DXM;
-use DXLog;
-use Spot;
-use DXDebug;
-use Filter;
-use DXDb;
-use AnnTalk;
-use Geomag;
-use WCY;
-use Time::HiRes qw(gettimeofday tv_interval);
-use BadWords;
-use DXHash;
-use Route;
-use Route::Node;
-use Script;
-use DXProt;
-use Verify;
-
-use strict;
-
-use vars qw($VERSION $BRANCH);
-$VERSION = sprintf( "%d.%03d", q$Revision$ =~ /(\d+)\.(\d+)/ );
-$BRANCH = sprintf( "%d.%03d", q$Revision$ =~ /\d+\.\d+\.(\d+)\.(\d+)/  || (0,0));
-$main::build += $VERSION;
-$main::branch += $BRANCH;
-
-sub init
-{
-       my $user = DXUser->get($main::mycall);
-       $DXProt::myprot_version += $main::version*100;
-       $main::me = QXProt->new($main::mycall, 0, $user); 
-       $main::me->{here} = 1;
-       $main::me->{state} = "indifferent";
-       $main::me->{sort} = 'S';    # S for spider
-       $main::me->{priv} = 9;
-       $main::me->{metric} = 0;
-       $main::me->{pingave} = 0;
-       $main::me->{registered} = 1;
-       $main::me->{version} = $main::version;
-       $main::me->{build} = $main::build;
-               
-#      $Route::Node::me->adddxchan($main::me);
-}
-
-sub start
-{
-       my $self = shift;
-       $self->SUPER::start(@_);
-}
-
-sub sendinit
-{
-       my $self = shift;
-       
-       $self->send($self->genI);
-}
-
-sub normal
-{
-       if ($_[1] =~ /^PC\d\d\^/) {
-               DXProt::normal(@_);
-               return;
-       }
-       my ($sort, $tonode, $fromnode, $msgid, $incs);
-       return unless ($sort, $tonode, $fromnode, $msgid, $incs) = $_[1] =~ /^QX([A-Z])\^(\*|[-A-Z0-9]+)\^([-A-Z0-9]+)\^([0-9A-F]{1,4})\^.*\^([0-9A-F]{2})$/;
-
-       $msgid = hex $msgid;
-       my $noderef = Route::Node::get($fromnode);
-       $noderef = Route::Node::new($fromnode) unless $noderef;
-
-       my $il = length $incs; 
-       my $cs = sprintf("%02X", unpack("%32C*", substr($_[1], 0, length($_[1]) - ($il+1))) & 255);
-       if ($incs ne $cs) {
-               dbg("QXPROT: Checksum fail in: $incs ne calc: $cs" ) if isdbg('chanerr');
-               return;
-       }
-
-       return unless $noderef->newid($msgid);
-
-       $_[0]->handle($sort, $tonode, $fromnode, $msgid, $_[1]);
-       return;
-}
-
-sub handle
-{
-       no strict 'subs';
-       my $self = shift;
-       my $sort = shift;
-       my $sub = "handle$sort";
-       $self->$sub(@_) if $self->can($sub);
-       return;
-}
-
-sub gen
-{
-       no strict 'subs';
-       my $self = shift;
-       my $sort = shift;
-       my $sub = "gen$sort";
-       $self->$sub(@_) if $self->can($sub);
-       return;
-}
-
-my $last_node_update = 0;
-my $node_update_interval = 60*15;
-
-sub process
-{
-       if ($main::systime >= $last_node_update+$node_update_interval) {
-#              sendallnodes();
-#              sendallusers();
-               $last_node_update = $main::systime;
-       }
-}
-
-sub disconnect
-{
-       my $self = shift;
-       $self->DXProt::disconnect(@_);
-}
-
-my $msgid = 1;
-
-sub frame
-{
-       my $sort = shift;
-       my $to = shift || "*";
-       my $ht;
-       
-       $ht = sprintf "%X", $msgid;
-       my $line = join '^', "QX$sort", $to, $main::mycall, $ht, @_;
-       my $cs = sprintf "%02X", unpack("%32C*", $line) & 255;
-       $msgid = 1 if ++$msgid > 0xffff;
-       return "$line^$cs";
-}
-
-sub handleI
-{
-       my $self = shift;
-       
-       my @f = split /\^/, $_[3];
-       if ($self->passphrase && $f[7] && $f[8]) {
-               my $inv = Verify->new($f[7]);
-               unless ($inv->verify($f[8], $main::me->user->passphrase, $main::mycall, $self->call)) {
-                       $self->sendnow('D','Sorry...');
-                       $self->disconnect;
-               }
-               $self->{verified} = 1;
-       } else {
-               $self->{verified} = 0;
-       }
-       if ($self->{outbound}) {
-               $self->send($self->genI);
-       } 
-       if ($self->{sort} ne 'S' && $f[4] eq 'DXSpider') {
-               $self->{user}->{sort} = $self->{sort} = 'S';
-               $self->{user}->{priv} = $self->{priv} = 1 unless $self->{priv};
-       }
-       $self->{version} = $f[5];
-       $self->{build} = $f[6];
-       $self->state('init1');
-       $self->{lastping} = 0;
-}
-
-sub genI
-{
-       my $self = shift;
-       my @out = ('I', $self->call, "DXSpider", ($main::version + 53) * 100, $main::build);
-       if (my $pass = $self->user->passphrase) {
-               my $inp = Verify->new;
-               push @out, $inp->challenge, $inp->response($pass, $self->call, $main::mycall);
-       }
-       return frame(@out);
-}
-
-sub handleR
-{
-
-}
-
-sub genR
-{
-
-}
-
-sub handleP
-{
-
-}
-
-sub genP
-{
-
-}
-
-sub gen2
-{
-       my $self = shift;
-       
-       my $node = shift;
-       my $sort = shift;
-       my @out;
-       my $dxchan;
-       
-       while (@_) {
-               my $str = '';
-               for (; @_ && length $str <= 230;) {
-                       my $ref = shift;
-                       my $call = $ref->call;
-                       my $flag = 0;
-                       
-                       $flag += 1 if $ref->here;
-                       $flag += 2 if $ref->conf;
-                       if ($ref->is_node) {
-                               my $ping = int($ref->pingave * 10);
-                               $str .= "^N$flag$call,$ping";
-                               my $v = $ref->build || $ref->version;
-                               $str .= ",$v" if defined $v;
-                       } else {
-                               $str .= "^U$flag$call";
-                       }
-               }
-               push @out, $str if $str;
-       }
-       my $n = @out;
-       my $h = get_hops(90);
-       @out = map { sprintf "PC90^%s^%X^%s%d%s^%s^", $node->call, $main::systime, $sort, --$n, $_, $h } @out;
-       return @out;
-}
-
-1;
diff --git a/perl/QXProt/QXI.pm b/perl/QXProt/QXI.pm
deleted file mode 100644 (file)
index aacfae6..0000000
+++ /dev/null
@@ -1,63 +0,0 @@
-#
-# This module is part of the new protocal mode for a dx cluster
-#
-# This module handles the initialisation between two nodes
-#
-# Copyright (c) 2003 Dirk Koopman G1TLH
-#
-# $Id$
-# 
-
-package QXI;
-
-use strict;
-
-use vars qw(@ISA $VERSION $BRANCH);
-@ISA = qw(QXProt);
-
-$VERSION = sprintf( "%d.%03d", q$Revision$ =~ /(\d+)\.(\d+)/ );
-$BRANCH = sprintf( "%d.%03d", q$Revision$ =~ /\d+\.\d+\.(\d+)\.(\d+)/  || (0,0));
-$main::build += $VERSION;
-$main::branch += $BRANCH;
-
-
-sub handle
-{
-       my ($self, $to, $from, $msgid, $line) = @_;
-       
-       my @f = split /\^/, $line;
-       if ($self->user->passphrase && @f > 3) {
-               my $inv = Verify->new($f[3]);
-               unless ($inv->verify($f[4], $main::me->user->passphrase, $main::mycall, $self->call)) {
-                       $self->sendnow('D','Sorry...');
-                       $self->disconnect;
-               }
-               $self->{verified} = 1;
-       } else {
-               $self->{verified} = 0;
-       }
-       if ($self->{outbound}) {
-               $self->send($self->QXI::gen);
-       } 
-       if ($self->{sort} ne 'S' && $f[0] eq 'DXSpider') {
-               $self->{user}->{sort} = $self->{sort} = 'S';
-               $self->{user}->{priv} = $self->{priv} = 1 unless $self->{priv};
-       }
-       $self->{version} = $f[1];
-       $self->{build} = $f[2];
-       $self->state('init1');
-       $self->{lastping} = 0;
-}
-
-sub gen
-{
-       my $self = shift;
-       my @out = ('I', $self->call, "DXSpider", ($main::version + 53) * 100, $main::build);
-       if (my $pass = $self->user->passphrase) {
-               my $inp = Verify->new;
-               push @out, $inp->challenge, $inp->response($pass, $self->call, $main::mycall);
-       }
-       return $self->frame(@out);
-}
-
-1;
diff --git a/perl/QXProt/QXP.pm b/perl/QXProt/QXP.pm
deleted file mode 100644 (file)
index ec9f96d..0000000
+++ /dev/null
@@ -1,54 +0,0 @@
-#
-# This module is part of the new protocal mode for a dx cluster
-#
-# This module handles ping requests
-#
-# Copyright (c) 2003 Dirk Koopman G1TLH
-#
-# $Id$
-# 
-
-package QXP;
-
-use strict;
-
-use vars qw(@ISA $VERSION $BRANCH);
-@ISA = qw(QXProt);
-
-$VERSION = sprintf( "%d.%03d", q$Revision$ =~ /(\d+)\.(\d+)/ );
-$BRANCH = sprintf( "%d.%03d", q$Revision$ =~ /\d+\.\d+\.(\d+)\.(\d+)/  || (0,0));
-$main::build += $VERSION;
-$main::branch += $BRANCH;
-
-sub handle
-{
-       my ($self, $to, $from, $msgid, $line) = @_;
-       
-       my @f = split /\^/, $line;
-
-       # is it for us?
-       if ($to eq $main::mycall) {
-               if ($f[0] == 1) {
-                       $self->send(gen($self, $from, '0', $f[1], $f[2], $f[3]));
-               } else {
-                       # it's a reply, look in the ping list for this one
-                       $self->handlepingreply($from);
-               }
-       } else {
-
-               # route down an appropriate thingy
-               $self->route($to, $line);
-       }
-}
-
-sub gen
-{
-       my ($self, $to, $flag, $user, $secs, $usecs) = @_;
-       my @out = ('P', $to, $flag);
-       push @out, $user if defined $user;
-       push @out, $secs if defined $secs;      
-       push @out, $usecs if defined $usecs;    
-       return $self->frame(@out);
-}
-
-1;
diff --git a/perl/QXProt/QXR.pm b/perl/QXProt/QXR.pm
deleted file mode 100644 (file)
index ad23e2b..0000000
+++ /dev/null
@@ -1,78 +0,0 @@
-
-#
-# This module is part of the new protocal mode for a dx cluster
-#
-# This module handles the Routing message between nodes
-#
-# Copyright (c) 2003 Dirk Koopman G1TLH
-#
-# $Id$
-# 
-
-package QXR;
-
-use strict;
-
-use vars qw(@ISA $VERSION $BRANCH);
-@ISA = qw(QXProt);
-
-$VERSION = sprintf( "%d.%03d", q$Revision$ =~ /(\d+)\.(\d+)/ );
-$BRANCH = sprintf( "%d.%03d", q$Revision$ =~ /\d+\.\d+\.(\d+)\.(\d+)/  || (0,0));
-$main::build += $VERSION;
-$main::branch += $BRANCH;
-
-sub handle
-{
-       my ($self, $to, $from, $msgid, $line) = @_;
-       
-       my @f = split /\^/, $line;
-}
-
-sub gen
-{
-       my $self = shift;
-       my @out = ('R', $self->call, "DXSpider", ($main::version + 53) * 100, $main::build);
-       if (my $pass = $self->user->passphrase) {
-               my $inp = Verify->new;
-               push @out, $inp->challenge, $inp->response($pass, $self->call, $main::mycall);
-       }
-       return $self->frame(@out);
-}
-
-1;
-
-sub gen2
-{
-       my $self = shift;
-       
-       my $node = shift;
-       my $sort = shift;
-       my @out;
-       my $dxchan;
-       
-       while (@_) {
-               my $str = '';
-               for (; @_ && length $str <= 230;) {
-                       my $ref = shift;
-                       my $call = $ref->call;
-                       my $flag = 0;
-                       
-                       $flag += 1 if $ref->here;
-                       $flag += 2 if $ref->conf;
-                       if ($ref->is_node) {
-                               my $ping = int($ref->pingave * 10);
-                               $str .= "^N$flag$call,$ping";
-                               my $v = $ref->build || $ref->version;
-                               $str .= ",$v" if defined $v;
-                       } else {
-                               $str .= "^U$flag$call";
-                       }
-               }
-               push @out, $str if $str;
-       }
-       my $n = @out;
-       my $h = get_hops(90);
-       @out = map { sprintf "PC90^%s^%X^%s%d%s^%s^", $node->call, $main::systime, $sort, --$n, $_, $h } @out;
-       return @out;
-}
index 5d5a824a08b0fddaffac0aca280850de18ad3efd..80c4a0573cb62899fa408826b0f46e7563677af1 100755 (executable)
@@ -182,8 +182,7 @@ sub new_channel
                if ($bumpexisting) {
                        my $ip = $conn->{peerhost} || 'unknown';
                        $dxchan->send_now('D', DXM::msg($lang, 'conbump', $call, $ip));
-                       Log('DXCommand', "$call bumped off by $ip, disconnected");
-                       dbg("$call bumped off by $ip, disconnected");
+                       LogDbg('DXCommand', "$call bumped off by $ip, disconnected");
                        $dxchan->disconnect;
                } else {
                        already_conn($conn, $call, DXM::msg($lang, 'conother', $call, $main::mycall));
@@ -199,7 +198,7 @@ sub new_channel
        if ($baseuser && $baseuser->lockout || $lock) {
                if (!$user || !defined $lock || $lock) {
                        my $host = $conn->{peerhost} || "unknown";
-                       Log('DXCommand', "$call on $host is locked out, disconnected");
+                       LogDbg('DXCommand', "$call on $host is locked out, disconnected");
                        $conn->disconnect;
                        return;
                }
@@ -284,8 +283,7 @@ sub cease
                $l->close_server;
        }
 
-       dbg("DXSpider version $version, build $build ended") if isdbg('chan');
-       Log('cluster', "DXSpider V$version, build $build ended");
+       LogDbg('cluster', "DXSpider V$version, build $build ended");
        dbgclose();
        Logclose();
 
@@ -351,13 +349,12 @@ STDOUT->autoflush(1);
 $build += $main::version;
 $build = "$build.$branch" if $branch;
 
-Log('cluster', "DXSpider V$version, build $build started");
+LogDbg('cluster', "DXSpider V$version, build $build started");
 
 # banner
 my ($year) = (gmtime)[5];
 $year += 1900;
 dbg("Copyright (c) 1998-$year Dirk Koopman G1TLH");
-dbg("DXSpider Version $version, build $build started");
 
 # try to load the database
 if ($dsn && -e "$root/perl/DXSql.pm") {