From: Dirk Koopman Date: Fri, 21 Jan 2022 16:40:53 +0000 (+0000) Subject: merge various things from master X-Git-Url: http://dxcluster.org/gitweb/gitweb.cgi?a=commitdiff_plain;h=7e3729a9039462c460dae4804f40c0bd506f3423;p=spider.git merge various things from master This is a major attempt at joining the two codebases together better so that it is easier to add joint features. But this is likely to be the last time I do this. --- diff --git a/perl/AsyncMsg.pm b/perl/AsyncMsg.pm index cb1c2f2b..f8cd2f9f 100644 --- a/perl/AsyncMsg.pm +++ b/perl/AsyncMsg.pm @@ -277,6 +277,19 @@ sub disconnect $conn->SUPER::disconnect; } +sub _send_later +{ + my $conn = shift; + my $m = shift; + + if (isdbg('async')) { + my $s = $m; + $s =~ s/([\%\x00-\x1f\x7f-\xff])/sprintf("%%%02X", ord($1))/eg; + dbg("AsyncMsg: send $s"); + } + $conn->send_later($m); +} + sub DESTROY { my $conn = shift; diff --git a/perl/DXChannel.pm b/perl/DXChannel.pm index c2358c3d..f8dabe1c 100644 --- a/perl/DXChannel.pm +++ b/perl/DXChannel.pm @@ -41,95 +41,110 @@ use vars qw(%channels %valid @ISA $count $maxerrors); $count = 0; %valid = ( - call => '0,Callsign', - conn => '9,Msg Conn ref', - user => '9,DXUser ref', - startt => '0,Start Time,atime', - t => '9,Time,atime', - pc50_t => '5,Last PC50 Time,atime', - priv => '9,Privilege', - state => '0,Current State', - oldstate => '5,Last State', - list => '9,Dep Chan List', - name => '0,User Name', - consort => '5,Connection Type', 'sort' => '5,Type of Channel', - wwv => '0,Want WWV,yesno', - wcy => '0,Want WCY,yesno', - wx => '0,Want WX,yesno', - talk => '0,Want Talk,yesno', ann => '0,Want Announce,yesno', - here => '0,Here?,yesno', + ann_talk => '0,Suppress Talk Anns,yesno', + annfilter => '5,Ann Filt-out', + annfilter => '5,Ann Filt-out', + badcount => '1,Bad Word Count', + badip => '9,BAD IP address', + beep => '0,Want Beeps,yesno', + build => '1,Node Build', + call => '0,Callsign', + cluster => '5,Cluster data', conf => '0,In Conference?,yesno', + conn => '9,Msg Conn ref', + consort => '5,Connection Type', + cq => '0,CQ Zone', + delayed => '5,Delayed messages,parray', + delayed => '5,Delayed messages,parray', + disconnecting => '9,Disconnecting,yesno', + do_pc9x => '9,Handles PC9x,yesno', + do_pc9x => '9,Handles PC9x,yesno', dx => '0,DX Spots,yesno', - redirect => '0,Redirect messages to', - lang => '0,Language', + dxcc => '0,Country Code', + edit => '7,Edit Function', + enhanced => '5,Enhanced Client,yesno', + errors => '9,Errors', func => '5,Function', - loc => '9,Local Vars', # used by func to store local variables in - beep => '0,Want Beeps,yesno', - lastread => '5,Last Msg Read', - outbound => '5,outbound?,yesno', - remotecmd => '9,doing rcmd,yesno', - pagelth => '0,Page Length', - pagedata => '9,Page Data Store', group => '0,Access Group,parray', # used to create a group of users/nodes for some purpose or other - isolate => '5,Isolate network,yesno', - delayed => '5,Delayed messages,parray', - annfilter => '5,Ann Filt-out', - wwvfilter => '5,WWV Filt-out', - wcyfilter => '5,WCY Filt-out', - spotsfilter => '5,Spot Filt-out', - routefilter => '5,Route Filt-out', - rbnfilter => '5,RBN Filt-out', - pc92filter => '5,PC92 Route Filt-out', + handle_xml => '9,Handles XML,yesno', + here => '0,Here?,yesno', + hostname => '0,Hostname', inannfilter => '5,Ann Filt-inp', - inwwvfilter => '5,WWV Filt-inp', - inwcyfilter => '5,WCY Filt-inp', - inspotsfilter => '5,Spot Filt-inp', - inroutefilter => '5,Route Filt-inp', - inrbnfilter => '5,RBN Filt-inp', inpc92filter => '5,PC92 Route Filt-inp', - passwd => '9,Passwd List,yesno', - pingint => '5,Ping Interval ', - nopings => '5,Ping Obs Count', - lastping => '5,Ping last sent,atime', - pingtime => '5,Ping totaltime,parray', - pingave => '0,Ping ave time', - logininfo => '9,Login info req,yesno', - talklist => '0,Talk List,parray', - cluster => '5,Cluster data', + inqueue => '9,Input Queue,parray', + inqueue => '9,Input Queue,parray', + inrbnfilter => '5,RBN Filt-inp', + inrbnfilter => '5,RBN Filt-inp', + inroutefilter => '5,Route Filt-inp', + inroutefilter => '5,Route Filt-inp', + inscript => '9,In a script,yesno', + inscript => '9,In a script,yesno', + inspotsfilter => '5,Spot Filt-inp', + inspotsfilter => '5,Spot Filt-inp', + inwcyfilter => '5,WCY Filt-inp', + inwcyfilter => '5,WCY Filt-inp', + inwwvfilter => '5,WWV Filt-inp', + inwwvfilter => '5,WWV Filt-inp', isbasic => '9,Internal Connection', - errors => '9,Errors', - route => '9,Route Data', - dxcc => '0,Country Code', + isolate => '5,Isolate network,yesno', + isolate => '5,Isolate network,yesno', + isslugged => '9,Still Slugged,yesno', + isslugged => '9,Still Slugged,yesno', itu => '0,ITU Zone', - cq => '0,CQ Zone', - enhanced => '5,Enhanced Client,yesno', - gtk => '5,Using GTK,yesno', - senddbg => '8,Sending Debug,yesno', - width => '0,Column Width', - disconnecting => '9,Disconnecting,yesno', - ann_talk => '0,Suppress Talk Anns,yesno', + lang => '0,Language', + lastmsgpoll => '0,Last Msg Poll,atime', + lastmsgpoll => '0,Last Msg Poll,atime', + lastping => '5,Ping last sent,atime', + lastread => '5,Last Msg Read', + list => '9,Dep Chan List', + loc => '9,Local Vars', # used by func to store local variables in + logininfo => '9,Login info req,yesno', metric => '1,Route metric', - badcount => '1,Bad Word Count', - edit => '7,Edit Function', - registered => '9,Registered?,yesno', - prompt => '0,Required Prompt', - version => '1,Node Version', - build => '1,Node Build', - verified => '9,Verified?,yesno', + name => '0,User Name', newroute => '1,New Style Routing,yesno', - ve7cc => '0,VE7CC program special,yesno', - lastmsgpoll => '0,Last Msg Poll,atime', - inscript => '9,In a script,yesno', - handle_xml => '9,Handles XML,yesno', - do_pc9x => '9,Handles PC9x,yesno', - inqueue => '9,Input Queue,parray', - next_pc92_update => '9,Next PC92 Update,atime', next_pc92_keepalive => '9,Next PC92 KeepAlive,atime', - hostname => '0,Hostname', - isslugged => '9,Still Slugged,yesno', + next_pc92_keepalive => '9,Next PC92 KeepAlive,atime', + next_pc92_update => '9,Next PC92 Update,atime', + next_pc92_update => '9,Next PC92 Update,atime', + nopings => '5,Ping Obs Count', + oldstate => '5,Last State', + outbound => '5,outbound?,yesno', + pagedata => '9,Page Data Store', + pagelth => '0,Page Length', + passwd => '9,Passwd List,yesno', + pc50_t => '5,Last PC50 Time,atime', + pc92filter => '5,PC92 Route Filt-out', + pc92filter => '5,PC92 Route Filt-out', + pingave => '0,Ping ave time', + pingint => '5,Ping Interval ', + pingtime => '5,Ping totaltime,parray', + priv => '9,Privilege', + prompt => '0,Required Prompt', + rbnfilter => '5,RBN Filt-out', + rbnfilter => '5,RBN Filt-out', + redirect => '0,Redirect messages to', + registered => '9,Registered?,yesno', + remotecmd => '9,doing rcmd,yesno', + route => '9,Route Data', + routefilter => '5,Route Filt-out', + routefilter => '5,Route Filt-out', + senddbg => '8,Sending Debug,yesno', + sluggedpcs => '9,Slugged PCxx Queue,parray', sluggedpcs => '9,Slugged PCxx Queue,parray', + spotsfilter => '5,Spot Filt-out', + spotsfilter => '5,Spot Filt-out', + startt => '0,Start Time,atime', + state => '0,Current State', + t => '9,Time,atime', + talk => '0,Want Talk,yesno', + talklist => '0,Talk List,parray', + user => '9,DXUser ref', + ve7cc => '0,VE7CC program special,yesno', + wcyfilter => '5,WCY Filt-out', + width => '0,Column Width', + wwvfilter => '5,WWV Filt-out', ); $maxerrors = 20; # the maximum number of concurrent errors allowed before disconnection diff --git a/perl/DXCommandmode.pm b/perl/DXCommandmode.pm index b89e1d3c..b9e6c678 100644 --- a/perl/DXCommandmode.pm +++ b/perl/DXCommandmode.pm @@ -45,6 +45,7 @@ use Time::HiRes qw(gettimeofday tv_interval); use Mojo::IOLoop; use DXSubprocess; use Mojo::UserAgent; +use DXCIDR; use strict; use vars qw(%Cache %cmd_cache $errstr %aliases $scriptbase %nothereslug @@ -204,6 +205,11 @@ sub start $self->tell_login('loginu'); $self->tell_buddies('loginb'); + + # is this a bad ip address? + if (is_ipaddr($self->{hostname})) { + $self->{badip} = DXCIDR->find($self->{hostname}); + } # do we need to send a forward/opernam? my $lastoper = $user->lastoper || 0; @@ -258,7 +264,7 @@ sub normal $cmdline =~ s/^\s*(.*)\s*$/$1/; if ($self->{state} eq 'page') { - my $i = $self->{pagelth}; + my $i = $self->{pagelth}-5; my $ref = $self->{pagedata}; my $tot = @$ref; @@ -269,7 +275,7 @@ sub normal } # send a tranche of data - while ($i-- > 0 && @$ref) { + for (; $i > 0 && @$ref; --$i) { my $line = shift @$ref; $line =~ s/\s+$//o; # why am having to do this? $self->send($line); @@ -1315,7 +1321,6 @@ sub send_motd $self->send_file($motd) if -e $motd; } - # Punt off a long running command into a separate process # # This is called from commands to run some potentially long running @@ -1408,7 +1413,7 @@ sub spawn_cmd sub user_count { - return ($users, $maxusers); + return ($users, $maxusers); } 1; diff --git a/perl/DXDb.pm b/perl/DXDb.pm index 81d21928..5d96e6cf 100644 --- a/perl/DXDb.pm +++ b/perl/DXDb.pm @@ -21,28 +21,28 @@ $dbbase = "$main::root/db"; # where all the databases are kept; %avail = (); # The hash contains a list of all the databases %valid = ( accesst => '9,Last Accs Time,atime', + allowread => '9,Allowed read,parray', + allowupd => '9,Allow upd,parray', + atemplate => '9,App Templates,parray', + cal => '0,No Key txt', + chain => '0,Search these,parray', createt => '9,Create Time,atime', - lastt => '9,Last Upd Time,atime', - name => '0,Name', db => '9,DB Tied hash', - remote => '0,Remote Database', - pre => '0,Heading txt', - post => '0,Tail txt', - chain => '0,Search these,parray', - disable => '0,Disabled?,yesno', - nf => '0,Not Found txt', - cal => '0,No Key txt', - allowread => '9,Allowed read,parray', denyread => '9,Deny read,parray', - allowupd => '9,Allow upd,parray', denyupd => '9,Deny upd,parray', + disable => '0,Disabled?,yesno', fwdupd => '9,Forw upd to,parray', - template => '9,Upd Templates,parray', - te => '9,End Upd txt', - tae => '9,End App txt', - atemplate => '9,App Templates,parray', help => '0,Help txt,parray', + lastt => '9,Last Upd Time,atime', localcmd => '0,Local Command', + name => '0,Name', + nf => '0,Not Found txt', + post => '0,Tail txt', + pre => '0,Heading txt', + remote => '0,Remote Database', + tae => '9,End App txt', + te => '9,End Upd txt', + template => '9,Upd Templates,parray', ); $lastprocesstime = time; diff --git a/perl/DXMsg.pm b/perl/DXMsg.pm index 174a98a4..a3b5e983 100644 --- a/perl/DXMsg.pm +++ b/perl/DXMsg.pm @@ -66,30 +66,30 @@ $importfn = "$msgdir/import"; # import directory %valid = ( - fromnode => '5,From Node', - tonode => '5,To Node', - to => '0,To', - from => '0,From', - t => '0,Msg Time,cldatetime', - private => '5,Private,yesno', - subject => '0,Subject', - linesreq => '0,Lines per Gob', - rrreq => '5,Read Confirm,yesno', - origin => '0,Origin', - lines => '5,Data', - stream => '9,Stream No', + 'read' => '5,Times read', count => '5,Gob Linecnt', + delete => '5,Awaiting Delete,yesno', + deletetime => '5,Deletion Time,cldatetime', file => '5,File?,yesno', + from => '0,From', + fromnode => '5,From Node', gotit => '5,Got it Nodes,parray', - lines => '5,Lines,parray', - 'read' => '5,Times read', - size => '0,Size', - msgno => '0,Msgno', keep => '0,Keep this?,yesno', lastt => '5,Last processed,cldatetime', + lines => '5,Data', + lines => '5,Lines,parray', + linesreq => '0,Lines per Gob', + msgno => '0,Msgno', + origin => '0,Origin', + private => '5,Private,yesno', + rrreq => '5,Read Confirm,yesno', + size => '0,Size', + stream => '9,Stream No', + subject => '0,Subject', + t => '0,Msg Time,cldatetime', + to => '0,To', + tonode => '5,To Node', waitt => '5,Wait until,cldatetime', - delete => '5,Awaiting Delete,yesno', - deletetime => '5,Deletion Time,cldatetime', ); # fix up the default sendmail if available diff --git a/perl/DXProt.pm b/perl/DXProt.pm index 4886a7ff..e1b1ea45 100644 --- a/perl/DXProt.pm +++ b/perl/DXProt.pm @@ -33,6 +33,7 @@ use Route; use Route::Node; use Script; use DXProtHandle; +use DXCIDR; use Time::HiRes qw(gettimeofday tv_interval); use DXSubprocess; @@ -297,9 +298,9 @@ sub start # log it my $host = $self->{conn}->peerhost; $host ||= "AGW Port #$self->{conn}->{agwport}" if exists $self->{conn}->{agwport}; + $host ||= $host if is_ipaddr($host); $host ||= "unknown"; $self->{hostname} = $host if is_ipaddr($host); - Log('DXProt', "$call connected from $host"); # remember type of connection diff --git a/perl/DXProtHandle.pm b/perl/DXProtHandle.pm index b051fad3..6f4fbd08 100644 --- a/perl/DXProtHandle.pm +++ b/perl/DXProtHandle.pm @@ -32,6 +32,7 @@ use DXHash; use Route; use Route::Node; use Script; +use DXCIDR; use strict; use warnings qw(all); @@ -185,6 +186,16 @@ sub handle_11 return; } + # check IP addresses + if ($pc->[8] && is_ipaddr($pc->[8])) { + my $ip = $pc->[8]; + $ip =~ s/,/:/g; + $ip =~ s/^::ffff://; + if (DXCIDR::find($ip)) { + + } + } + # convert the date to a unix date my $d = cltounix($pc->[3], $pc->[4]); # bang out (and don't pass on) if date is invalid or the spot is too old (or too young) @@ -1557,7 +1568,6 @@ sub _decode_pc92_call my $is_node = $flag & 4; my $is_extnode = $flag & 2; my $here = $flag & 1; - my $ip; my $version = $part[1] || 0; my $build = $part[2] || 0; my $ip = $part[3] || ''; @@ -1569,15 +1579,11 @@ sub _decode_pc92_call $version =~ s/\D//g; $build =~ s/^0\.//; $build =~ s/\D//g; - $version ||= 0; - $build ||= 0; - if ($ip) { $ip =~ s/,/:/g; $ip =~ s/^::ffff://i; } dbg("$icall = '" . join("', '", $call, $is_node, $is_extnode, $here, $version, $build, $ip) . "'") if isdbg('pc92'); - return ($call, $is_node, $is_extnode, $here, $version+0, $build+0, $ip); } @@ -1626,6 +1632,10 @@ sub _add_thingy my ($call, $is_node, $is_extnode, $here, $version, $build, $ip) = @$s; my @rout; + # remove spurious IPV6 prefix on IPV4 addresses + $build ||= 0; + $version ||= 0; + if ($call) { my $ncall = $parent->call; if ($ncall ne $call) { @@ -1649,12 +1659,12 @@ sub _add_thingy @rout = $parent->add($call, $version, Route::here($here), $ip); $r = Route::Node::get($call); $r->PC92C_dxchan($dxchan->call, $hops) if $r; - if ($version && $version =~ /^\d+$/) { + if ($version && is_numeric($version) && !$r->K && !$user->K) { my $old = $user->sort; if ($user->is_ak1a && (($version >= 5455 && $build > 0) || ($version >= 3000 && $version <= 3500)) ) { $user->sort('S'); dbg("PCProt::_add_thingy node $call v: $version b: $build sort ($old) updated to " . $user->sort); - } elsif ($user->is_spider && $version =~ /^\d+$/ && ($version < 3000 || ($version > 4000 && $version < 5455))) { + } elsif ($user->is_spider && ($version < 3000 || ($version > 4000 && $version < 5455))) { unless ($version == 5000 && $build == 0) { $user->sort('A'); $build //= 0; @@ -1662,6 +1672,9 @@ sub _add_thingy } } } + $r->version($user->version) if $user->version; + $r->build($user->build) if $user->build; + $r->K(1) if $user->K; } else { dbg("ROUTE: added user $call to $ncall") if isdbg('routelow'); $user = check_add_user($call, 'U', $parent->call); @@ -2006,22 +2019,38 @@ sub handle_92 my $call = $parent->call; my $version = $ent[4] || 0; my $build = $ent[5] || 0; + $build =~ s/^0\.//; my $oldbuild = $parent->build || 0; my $oldversion = $parent->version || 0; my $user = check_add_user($parent->call, 'S'); my $oldsort = $user->sort // ''; -# if ($version =~ /^\d+$/ && $oldversion =~ /^\d+$/) { - if ($oldsort ne 'S' || $oldversion != $version || $build != $oldbuild) { - dbg("PCProt PC92 K node $call updated version: $version (was $oldversion) build: $build (was $oldbuild) sort: 'S' (was $oldsort)"); - $user->sort('S'); + + dbg("PCProt PC92 K v: $version ov: $oldversion b: $build ob: $oldbuild pk: " . ($parent->K || '0') . " uk: " . ($user->K || 0)) if isdbg('pc92k'); + + if (is_numeric($version) || is_numeric($build)) { + my $changed = 0; + if (($oldversion ne $version || $build ne $oldbuild)) { + dbg("PCProt PC92 K node $call updated version: $version (was $oldversion) build: $build (was $oldbuild)"); $user->version($parent->version($version)); $user->build($parent->build($build)); - $user->put; + ++$changed; } -# } else { -# dbg("DXProt PC92 K version strings new: '$version' old: '$oldversion'"); -# } - dbg("ROUTE: reset obscount on $parent->{call} now " . $parent->obscount) if isdbg('obscount'); + if ($oldsort ne 'S') { + dbg("PCProt PC92 K node $call updated sort: $sort (was $oldsort)"); + $user->sort('S'); + ++$changed; + } + unless ($user->K) { + dbg("PCProt PC92 K node $call updated - marked as PC92 K user"); + $user->K(1); + ++$changed; + } + $user->put if $changed; + $parent->K(1); # mark this as come in on a K + } else { + dbg("DXProt PC92 K version call $call: invalid version: '$version' or build: '$version', ignored"); + } + dbg("ROUTE: reset obscount on $call now " . $parent->obscount) if isdbg('obscount'); } } elsif ($sort eq 'A' || $sort eq 'D' || $sort eq 'C') { diff --git a/perl/DXUser.pm b/perl/DXUser.pm index ef447562..d147d68a 100644 --- a/perl/DXUser.pm +++ b/perl/DXUser.pm @@ -41,75 +41,99 @@ my $json; # hash of valid elements and a simple prompt %valid = ( - call => '0,Callsign', - alias => '0,Real Callsign', - name => '0,Name', - qth => '0,Home QTH', - lat => '0,Latitude,slat', - long => '0,Longitude,slong', - qra => '0,Locator', - email => '0,E-mail Address,parray', - priv => '9,Privilege Level', - lastin => '0,Last Time in,cldatetime', - lastseen => '0,Last Seen,cldatetime', - passwd => '9,Password,yesno', - passphrase => '9,Pass Phrase,yesno', - addr => '0,Full Address', 'sort' => '0,Type of User', # A - ak1a, U - User, S - spider cluster, B - BBS - xpert => '0,Expert Status,yesno', + K => '9,Seen on PC92 K,yesno', + addr => '0,Full Address', + addr => '0,Full Address', + alias => '0,Real Callsign', + alias => '0,Real Callsign', + annok => '9,Accept Announces?,yesno', # accept his announces? bbs => '0,Home BBS', - node => '0,Last Node', - homenode => '0,Home Node', - lockout => '9,Locked out?,yesno', # won't let them in at all + believe => '1,Believable nodes,parray', + believe => '1,Believable nodes,parray', + buddies => '0,Buddies,parray', + build => '1,Build', + build => '1,Build', + call => '0,Callsign', + call => '0,Callsign', + connlist => '1,Connections,parraydifft', dxok => '9,Accept DX Spots?,yesno', # accept his dx spots? - annok => '9,Accept Announces?,yesno', # accept his announces? - lang => '0,Language', - hmsgno => '0,Highest Msgno', + email => '0,E-mail Address,parray', + email => '0,E-mail Address,parray', group => '0,Group,parray', # used to create a group of users/nodes for some purpose or other - buddies => '0,Buddies,parray', + hmsgno => '0,Highest Msgno', + homenode => '0,Home Node', isolate => '9,Isolate network,yesno', - wantbeep => '0,Req Beep,yesno', - wantann => '0,Req Announce,yesno', - wantwwv => '0,Req WWV,yesno', - wantwcy => '0,Req WCY,yesno', - wantecho => '0,Req Echo,yesno', - wanttalk => '0,Req Talk,yesno', - wantwx => '0,Req WX,yesno', - wantdx => '0,Req DX Spots,yesno', - wantemail => '0,Req Msgs as Email,yesno', + lang => '0,Language', + lastin => '0,Last Time in,cldatetime', + lastin => '0,Last Time in,cldatetime', + lastoper => '9,Last for/oper,cldatetime', + lastoper => '9,Last for/oper,cldatetime', + lastping => '1,Last Ping at,ptimelist', + lastping => '1,Last Ping at,ptimelist', + lastseen => '0,Last Seen,cldatetime', + lat => '0,Latitude,slat', + lat => '0,Latitude,slat', + lockout => '9,Locked out?,yesno', # won't let them in at all + long => '0,Longitude,slong', + long => '0,Longitude,slong', + maxconnect => '1,Max Connections', + maxconnect => '1,Max Connections', + name => '0,Name', + name => '0,Name', + node => '0,Last Node', + nopings => '9,Ping Obs Count', + nothere => '0,Not Here Text', + nothere => '0,Not Here Text', pagelth => '0,Current Pagelth', + passphrase => '9,Pass Phrase,yesno', + passphrase => '9,Pass Phrase,yesno', + passwd => '9,Password,yesno', + passwd => '9,Password,yesno', pingint => '9,Node Ping interval', - nopings => '9,Ping Obs Count', - wantlogininfo => '0,Login Info Req,yesno', - wantgrid => '0,Show DX Grid,yesno', + priv => '9,Privilege Level', + priv => '9,Privilege Level', + prompt => '0,Required Prompt', + prompt => '0,Required Prompt', + qra => '0,Locator', + qra => '0,Locator', + qth => '0,Home QTH', + qth => '0,Home QTH', + rbnseeme => '0,RBN See Me', + registered => '9,Registered?,yesno', + registered => '9,Registered?,yesno', + startt => '0,Start Time,cldatetime', + version => '1,Version', + version => '1,Version', + wantann => '0,Req Announce,yesno', wantann_talk => '0,Talklike Anns,yesno', - wantpc16 => '9,Want Users from node,yesno', - wantsendpc16 => '9,Send PC16,yesno', - wantroutepc19 => '9,Route PC19,yesno', - wantusstate => '0,Show US State,yesno', + wantbeacon => '0,Want RBN Beacon,yesno', + wantbeep => '0,Req Beep,yesno', + wantcw => '0,Want RBN CW,yesno', + wantdx => '0,Req DX Spots,yesno', wantdxcq => '0,Show CQ Zone,yesno', wantdxitu => '0,Show ITU Zone,yesno', + wantecho => '0,Req Echo,yesno', + wantemail => '0,Req Msgs as Email,yesno', + wantft => '0,Want RBN FT4/8,yesno', wantgtk => '0,Want GTK interface,yesno', + wantlogininfo => '0,Login Info Req,yesno', + wantpc16 => '9,Want Users from node,yesno', wantpc9x => '0,Want PC9X interface,yesno', + wantpsk => '0,Want RBN PSK,yesno', wantrbn => '0,Want RBN spots,yesno', - wantft => '0,Want RBN FT4/8,yesno', - wantcw => '0,Want RBN CW,yesno', + wantroutepc19 => '9,Route PC19,yesno', wantrtty => '0,Want RBN RTTY,yesno', - wantpsk => '0,Want RBN PSK,yesno', - wantbeacon => '0,Want RBN Beacon,yesno', - lastoper => '9,Last for/oper,cldatetime', - nothere => '0,Not Here Text', - registered => '9,Registered?,yesno', - prompt => '0,Required Prompt', - version => '1,Version', - build => '1,Build', - believe => '1,Believable nodes,parray', - lastping => '1,Last Ping at,ptimelist', - maxconnect => '1,Max Connections', - startt => '0,Start Time,cldatetime', - connlist => '1,Connections,parraydifft', + wantsendpc16 => '9,Send PC16,yesno', + wanttalk => '0,Req Talk,yesno', + wantusstate => '0,Show US State,yesno', + wantwcy => '0,Req WCY,yesno', + wantwwv => '0,Req WWV,yesno', + wantwx => '0,Req WX,yesno', width => '0,Preferred Width', - rbnseeme => '0,RBN See Me', + width => '0,Preferred Width', + xpert => '0,Expert Status,yesno', + wantgrid => '0,Show DX Grid,yesno', ); #no strict; @@ -235,7 +259,6 @@ sub get # search for it unless ($dbm->get($call, $data)) { eval { $ref = decode($data); }; - if ($ref) { if (!UNIVERSAL::isa($ref, 'DXUser')) { dbg("DXUser::get: got strange answer from decode of $call". ref $ref. " ignoring"); diff --git a/perl/DXUtil.pm b/perl/DXUtil.pm index be6dfb4d..cd50f4ae 100644 --- a/perl/DXUtil.pm +++ b/perl/DXUtil.pm @@ -29,7 +29,7 @@ require Exporter; is_qra is_freq is_digits is_pctext is_pcflag insertitem deleteitem is_prefix dd is_ipaddr $pi $d2r $r2d localdata localdata_mv diffms _diffms _diffus difft parraydifft is_ztime basecall - normalise_call + normalise_call is_numeric ); @@ -448,7 +448,7 @@ sub is_latlong # is it an ip address? sub is_ipaddr { - return $_[0] =~ /^\d+\.\d+\.\d+\.\d+$/ || $_[0] =~ /^[0-9a-f:,]+$/; + return $_[0] =~ /^\d+\.\d+\.\d+\.\d+$/ || $_[0] =~ /^(?:[\da-f]{1,4}:|:)(?:\:[0-9a-f]{1,4}){1,6}/i; } # is it a zulu time hhmmZ @@ -614,3 +614,8 @@ sub normalise_call $ncall .= "-$ssid" if $ssid; return $ncall; } + +sub is_numeric +{ + return $_[0] =~ /^[\.\d]+$/; +} diff --git a/perl/DXVars.pm.issue b/perl/DXVars.pm.issue index afc8dbf7..13936861 100644 --- a/perl/DXVars.pm.issue +++ b/perl/DXVars.pm.issue @@ -1,4 +1,4 @@ -# +# -*- perl -*- # The system variables - those indicated will need to be changed to suit your # circumstances (and callsign) # diff --git a/perl/Messages b/perl/Messages index 2554d270..f3f6b585 100644 --- a/perl/Messages +++ b/perl/Messages @@ -9,2252 +9,2255 @@ package DXM; %msgs = ( en => { - addr => 'Address set to: $_[0]', - agwe => 'AGW Engine enabled', - agwu => 'AGW Engine disabled', - already => '$_[0] already connected', - anns => 'Announces enabled for $_[0]', - annu => 'Announces disabled for $_[0]', - annts => 'AnnTalk enabled for $_[0]', - anntu => 'AnnTalk disabled for $_[0]', - at => 'at', - badnode1 => '$_[0] is now a bad node', - badnode2 => '$_[0] is now a good node', - badnode3 => 'List of Bad Nodes:-', - bbse1 => 'Please enter your BBS address,, set/bbs ', - bbs => 'Your BBS Address is now \"$_[0]\"', - beepoff => 'Beeps are now off', - beepon => 'Beeps are now on', - believes => 'Believe node $_[0] via $_[1]', - believeu => 'Don\'t believe node $_[0] via $_[1]', - buddya => '$_[0] has been added to your buddies', - buddyu => '$_[0] has been removed from your buddies', - call1 => 'Callsign lookup via $_[0]:', - chatend => 'Finished chatting on $_[0]', - chatinst => 'Entering Chatmode on $_[0], /EX to end, / to run a command', - chatprompt => 'Chat ($_[0])>', - chattoomany => 'Not allowed, already in $_[1], use /chat $_[0]', - cluster => 'Nodes: $_[0]/$_[1] Users [Loc/Clr]: $_[2]/$_[3] Max: $_[4]/$_[5] - Uptime: $_[6]', - conother => 'Sorry $_[0] you are connected to me on another port', - concluster => 'Sorry $_[0] you are already connected elsewhere on the cluster (on $_[1])', - contomany => 'Sorry $_[0] but you are already connected to $_[1] other nodes (on $_[2])', - conscript => 'no connect script called \"$_[0]\" found in $main::root/connect', - confail => 'connection to $_[0] failed ($_[1])', - constart => 'connection to $_[0] started', - conbump => 'Reconnected as $_[0] at $_[1], this instance is disconnected', - creuser => 'User $_[0] has been created', - deluser => 'User $_[0] has been deleted', - db1 => 'This database is hosted at $_[0]', - db2 => 'Sorry, but key: $_[0] was not found in $_[1]', - db3 => 'Sorry, database $_[0] doesn\'t exist here', - db4 => 'Sorry, database $_[0] located at $_[1] isn\'t currently online', - db5 => 'Accessing remote database on $_[0]...standby...', - db6 => 'Database $_[0] already exists, delete it first', - db7 => 'Database $_[0] created for remote node $_[1]', - db8 => 'Database $_[0] created locally', - db9 => 'Database $_[0] removed', - db10 => '$_[0] records imported from $_[1] to $_[2]', - db11 => 'Sending your request(s) to $_[0], please stand by...', - db12 => 'DB Name Location Cmd Chain', - db13 => '$_[0] records exported from $_[1] to $_[2]', - dfreq1 => 'Invalid freq $_[0] need: eg 0/30000 or hf or hf/cw', - dir1 => 'No messages found', - disc1 => 'Disconnected by $_[0]', - disc2 => 'Channel $_[0] disconnected', - disc3 => 'No Channel, but connection $_[0] disconnected', - disc4 => 'No Channel or connection but orphan $_[0] disconnected', - done => 'Done', - dup => 'Sorry, this is a duplicate', - dx1 => 'Frequency $_[0] not in band (see show/band); usage: DX [BY call] freq call comments', - dx2 => 'Need a callsign; usage: DX [BY call] freq call comments', - dx3 => 'The callsign or frequency is invalid', - dx4 => 'The ip address ($_[0]) is invalid', - dxcqs => 'DX CQ Zones enabled for $_[0]', - dxcqu => 'DX CQ Zones disabled for $_[0]', - dxitus => 'DX ITU Zones enabled for $_[0]', - dxituu => 'DX ITU Zones disabled for $_[0]', - dxs => 'DX Spots enabled for $_[0]', - dxu => 'DX Spots disabled for $_[0]', - e1 => 'Invalid command', - e2 => 'Error: $_[0]', - e3 => '$_[0]: $_[1] not found', - e4 => 'Need at least a prefix or callsign', - e5 => 'Not Allowed', - e6 => '*** No station specified ***', - e7 => 'callsign $_[0] not visible on the cluster', - e8 => 'Need a callsign and some text', - e9 => 'Need at least some text', - e10 => '$_[0] not connected locally', - e11 => 'Can\'t use $_[0] as target', - e12 => 'Need a node callsign', - e13 => '$_[0] is not a node', - e14 => 'First argument must be numeric and > 0', - e15 => 'invalid qualifier \"$_[0]\"', - e16 => 'File \"$_[0]\" exists', - e17 => 'Please don\'t use the words: @_ on here', - e18 => 'Cannot connect to $_[0] ($!)', - e19 => 'Invalid character(s) in line $_[0]', - e20 => qq{token '$_[0]' not recognised}, - e21 => '$_[0] is not numeric', - e22 => '$_[0] is not a callsign', - e23 => '$_[0] is not a range (eg 0/30000)', - e24 => 'Sorry, Internet access is not enabled', - e25 => 'Sorry the value must be between $_[0] and $_[1]', - e26 => 'Too many concurrent errors, you are being disconnected', - e27 => '$_[0] not a numeric or a callsign prefix', - e28 => 'Sorry, you need to be registered (SP $main::myalias to register)', - e29 => 'Need a password', - e30 => 'Cannot Open $_[0] $!', - e31 => '$_[0] is not a user', - e32 => 'Need a passphrase', - e33 => '$_[0] is not a number of days or a valid date', - e34 => 'Need a GROUP and some text', - e35 => 'You are not a member of $_[0], join $_[0]', - e36 => 'You can only do this in normal user prompt state', - e37 => 'Need at least a callsign', - e38 => 'This is not a valid regex', - e39 => 'Sorry $_[0] is not a valid argument', - echoon => 'Echoing enabled', - echooff => 'Echoing disabled', - echow => '*Echoing is currently disabled, set/echo to enable', - emaile1 => 'Please enter your email address, set/email ', - emaila => 'Your E-Mail Address is now \"$_[0]\"', - email => 'E-mail address set to: $_[0]', - export1 => 'usage: export ', - export2 => '$_[3] has error exporting msg $_[0] to $_[1] ($_[2])', - export3 => '$_[2 ] exported msg $_[0] to $_[1]', - filter1 => 'Filter $_[0] updated for $_[1]', - filter2 => 'Unknown filter keyword $_[0]', - filter3 => 'No filters defined for $_[0]', - filter4 => '$_[0]$_[1] Filter $_[2] deleted for $_[3]', - filter5 => 'need some filter commands...', - filter6 => '$_[0]$_[1] Filter for $[2] not found', - filter7 => '$_[0] parse error $_[1] on $_[2]', - grayline1 => ' Beg of End of', - grayline2 => 'Location dd/mm/yyyy Dawn Rise Set Dusk', - grids => 'DX Grid enabled for $_[0]', - gridu => 'DX Grid disabled for $_[0]', - gtks => 'GTK output enabled for $_[0]', - gtku => 'GTK output disabled for $_[0]', - illcall => 'Sorry, $_[0] is an invalid callsign', - hasha => '$_[0] already exists in $_[1]', - hashb => '$_[0] added to $_[1]', - hashc => '$_[0] removed from $_[1]', - hashd => '$_[0] not in $_[1]', - hashe => '$_[0] set on $_[1]', - heading => 'Heading', - helpe1 => 'Help system unavailable, tell sysop', - helpe2 => 'No help available on $_[0]', - heres => 'Here set on $_[0]', - heade1 => 'Using $main::mycall Coords, consider doing a set/location or set/qra', - hereu => 'Here unset on $_[0]', - homebbs => 'Home BBS set to: $_[0]', - homenode => 'Home Node set to: $_[0]', - homenode2 => 'Home Node', - hnodee1 => 'Please enter your Home Node, set/homenode ', - hnodee2 => 'Failed to set homenode on $_[0]', - hnode => 'Your Homenode is now \"$_[0]\"', - init1 => 'sent initialisation message to $_[0]', - iso => '$_[0] Isolated', - isou => '$_[0] UnIsolated', - isoc => '$_[0] created and Isolated', - isoari => 'there is an input route filter for $_[0]; clear/route input $_[0] first', - isoaro => 'there is an output route filter for $_[0]; clear/route $_[0] first', - isow => '$_[0] is isolated; unset/isolate $_[0] first', - join => 'joining group $_[0]', - l1 => 'Sorry $_[0], you are already logged on on another channel', - l2 => 'Hello $_[0], this is $main::mycall in $main::myqth\nrunning DXSpider V$main::version build $main::build', - lang => 'Language is now English', - lange1 => 'set/language where is one of ($_[0])', - lange2 => 'failed to set language on $_[0]', - lastconn => 'Last connect', - leave => 'leaving group $_[0]', - lgset => 'Added $_[0] to the local node group', - lgunset => 'Removed $_[0] from the local node group', - lh1 => '$main::data/hop_table.pl doesn\'t exist', - local1 => 'Local', - loce1 => 'Please enter your location,, set/location ', - loce2 => 'Don\'t recognise \"$_[0]\" as a Lat/Long (eg 52 20 N 0 16 E)', - loce3 => '$_[0] is a QRA locator, please use: set/qra $_[0]', - loc => 'Your Lat/Long is now \"$_[0]\"', - location => 'Location', - lockout => '$_[0] Locked out', - lockoutc => '$_[0] Created and Locked out', - lockoutun => '$_[0] Unlocked', - lockoutuse => 'usage: sh/lockout |ALL', - loginb => 'Buddy $_[0] has logged in', - loginbn => 'Buddy $_[0] has logged in at $_[1]', - logoutb => 'Buddy $_[0] has logged out', - logoutbn => 'Buddy $_[0] has logged out from $_[1]', - loginu => 'User $_[0] has logged in', - logoutu => 'User $_[0] has logged out', - loginn => 'Node $_[0] has logged in', - logoutn => 'Node $_[0] has logged out', - m1 => 'Enter Subject (30 characters):', - m2 => 'Copy of msg $_[0] sent to $_[1]', - m3 => 'Sorry, $_[0] is an unacceptable TO address', - m4 => 'Sorry, can\'t access message $_[0]', - m5 => 'Sorry, I need a message number', - m6 => 'Reply to: $_[0]', - m7 => 'Subject : $_[0]', - m8 => 'Enter lines of text, /EX to send or /ABORT to exit', - m9 => 'New mail has arrived for you', - m10 => 'Message/Script Aborted', - m11 => 'Message no $_[0] saved and directed to $_[1]', - m12 => 'Message no $_[0] deleted', - m13 => 'Message no $_[0] missing', - m14 => 'Message no $_[0] marked as sent to $_[1]', - m15 => 'Message no $_[0] unmarked as sent to $_[1]', - m16 => 'Need a Message number', - m17 => 'Sorry, cannot send messages in $_[0] mode', - m18 => 'Sorry, message $_[0] is currently set to KEEP', - m19 => 'Startup Script for $_[0] saved, $_[1] lines', - m20 => 'Startup Script for $_[0] deleted', - m21 => '$_[0] Working...', - m22 => 'Startup Script for $_[0] not found/error $!', - maxconnect => 'Max connections on $_[0] set to $_[1]', - msg1 => 'Bulletin Messages Queued', - msg2 => 'Private Messages Queued', - msg3 => 'Msg $_[0]: $_[1] changed from $_[2] to $_[3]', - msgu => 'usage: msg data...', - merge1 => 'Merge request for $_[1] spots and $_[2] WWV sent to $_[0]', - moon => 'Location dd/mm/yyyy Rise Set', - moon_with_azel => 'Location dd/mm/yyyy Rise Set Azim Elev', - mond => 'Monitoring Disabled', - mone => 'Monitoring Enabled', - name1 => 'Name', - namee1 => 'Please enter your name, set/name ', - namee2 => 'Can\'t find user $_[0]!', - name => 'Your name is now \"$_[0]\"', - nodea => '$_[0] set as AK1A style Node', - nodeac => '$_[0] created as AK1A style Node', - nodeb => '$_[0] set as BBS', - nodebc => '$_[0] created as BBS', - nodec => '$_[0] set as CLX style Node', - nodecc => '$_[0] created as CLX style Node', - noder => '$_[0] set as AR-Cluster style Node', - noderc => '$_[0] created as AR-Cluster style Node', - nodes => '$_[0] set as DXSpider style Node', - nodesc => '$_[0] created as DXSpider style Node', - noden => '$_[0] set as RBN Feed ', - nodenc => '$_[0] created as RBN Feed', - nodex => '$_[0] set as DXNET style Node', - nodexc => '$_[0] created as DXNET style Node', - nodeu => '$_[0] set back as a User', - nodee1 => 'You cannot use this command whilst your target ($_[0]) is on-line', - notdone => 'NOT Done', - nothere => 'Sorry, but $_[0] isn\'t here at the moment, please try later', - obscount => 'Ping obsolescence count on $_[0] set to $_[1]', - ok => 'Operation successful', - outconn => 'Outstanding connect to $_[0]', - page => 'Press Enter to continue, A to abort ($_[0] lines) >', - pagelth => 'Page Length is now $_[0] lines', - pagewidth => 'Page width is now $_[0] columns', - passerr => 'Please use: SET/PASS ', - passphrase => 'Passphrase set or changed for $_[0]', - passphraseu => 'Passphrase removed for $_[0]', - password => 'Password set or changed for $_[0]', - passwordu => 'Password removed for $_[0]', - pc90s => 'PC90 enabled for $_[0]', - pc90u => 'PC90 disabled $_[0]', - pingo => 'Ping Started to $_[0]', - pingi => 'Ping Returned from $_[0] $_[1] (Ave $_[2]) secs', - pinge1 => 'Cannot ping yourself!', - pingint => 'Ping interval on $_[0] set to $_[1] secs', - 'pos' => 'From Callsign: $_[0] Lat: $_[1] Long: $_[2]', - pr => '%C de %M %D %T dxspider >', - prs => 'Prompt is changed', - pru => 'Prompt now set back to default', - priv => 'Privilege level changed on $_[0]', - prx => '$main::mycall >', - pw0 => 'Enter old password: ', - pw1 => 'Enter new password: ', - pw2 => 'Re-enter new password: ', - pw3 => 'Password changed', - pw4 => 'Passwords differ, password NOT changed', - qll => 'Please enter your location with set/location or set/qra', - qthe1 => 'Please enter your QTH, set/qth ', - qth => 'Your QTH is now \"$_[0]\"', - qrae1 => 'Please enter your QRA locator, set/qra (eg set/qra JO02LQ)', - qrashe1 => 'Please enter a QRA locator, eg sh/qra JO02LQ or sh/qra JO02LQ IO93NS', - qrae2 => 'Don\'t recognise \"$_[0]\" as a QRA locator (eg JO02LQ)', - qra => 'Your QRA Locator is now \"$_[0]\"', + addr => q{Address set to: $_[0]}, + agwe => q{AGW Engine enabled}, + agwu => q{AGW Engine disabled}, + already => q{$_[0] already connected}, + anns => q{Announces enabled for $_[0]}, + annu => q{Announces disabled for $_[0]}, + annts => q{AnnTalk enabled for $_[0]}, + anntu => q{AnnTalk disabled for $_[0]}, + at => q{at}, + badnode1 => q{$_[0] is now a bad node}, + badnode2 => q{$_[0] is now a good node}, + badnode3 => q{List of Bad Nodes:-}, + bbse1 => q{Please enter your BBS address,, set/bbs }, + bbs => q{Your BBS Address is now "$_[0]"}, + beepoff => q{Beeps are now off}, + beepon => q{Beeps are now on}, + believes => q{Believe node $_[0] via $_[1]}, + believeu => q{Don't believe node $_[0] via $_[1]'}, + buddya => q{$_[0] has been added to your buddies}, + buddyu => q{$_[0] has been removed from your buddies}, + call1 => q{Callsign lookup via $_[0]:}, + chatend => q{Finished chatting on $_[0]}, + chatinst => q{Entering Chatmode on $_[0], /EX to end, / to run a command}, + chatprompt => q{Chat ($_[0])>}, + chattoomany => q{Not allowed, already in $_[1], use /chat $_[0]}, + cluster => q{Nodes: $_[0]/$_[1] Users [Loc/Clr]: $_[2]/$_[3] Max: $_[4]/$_[5] - Uptime: $_[6]}, + conother => q{Sorry $_[0] you are connected to me on another port}, + concluster => q{Sorry $_[0] you are already connected elsewhere on the cluster (on $_[1])}, + contomany => q{Sorry $_[0] but you are already connected to $_[1] other nodes (on $_[2])}, + conscript => q{no connect script called "$_[0]" found in $main::root/connect}, + confail => q{connection to $_[0] failed ($_[1])}, + constart => q{connection to $_[0] started}, + conbump => q{Reconnected as $_[0] at $_[1], this instance is disconnected}, + creuser => q{User $_[0] has been created}, + deluser => q{User $_[0] has been deleted}, + db1 => q{This database is hosted at $_[0]}, + db2 => q{Sorry, but key: $_[0] was not found in $_[1]}, + db3 => q{Sorry, database $_[0] doesn't exist here}, + db4 => q{Sorry, database $_[0] located at $_[1] isn't currently online}, + db5 => q{Accessing remote database on $_[0]...standby...}, + db6 => q{Database $_[0] already exists, delete it first}, + db7 => q{Database $_[0] created for remote node $_[1]}, + db8 => q{Database $_[0] created locally}, + db9 => q{Database $_[0] removed}, + db10 => q{$_[0] records imported from $_[1] to $_[2]}, + db11 => q{Sending your request(s) to $_[0], please stand by...}, + db12 => q{DB Name Location Cmd Chain}, + db13 => q{$_[0] records exported from $_[1] to $_[2]}, + dfreq1 => q{Invalid freq $_[0] need: eg 0/30000 or hf or hf/cw'}, + dir1 => q{No messages found}, + disc1 => q{Disconnected by $_[0]}, + disc2 => q{Channel $_[0] disconnected}, + disc3 => q{No Channel, but connection $_[0] disconnected}, + disc4 => q{No Channel or connection but orphan $_[0] disconnected}, + done => q{Done}, + dup => q{Sorry, this is a duplicate}, + dx1 => q{Frequency $_[0] not in band (see show/band); usage: DX [BY call] freq call comments}, + dx2 => q{Need a callsign; usage: DX [BY call] freq call comments}, + dx3 => q{The callsign or frequency is invalid}, + dx4 => q{The ip address ($_[0]) is invalid}, + dxcqs => q{DX CQ Zones enabled for $_[0]}, + dxcqu => q{DX CQ Zones disabled for $_[0]}, + dxitus => q{DX ITU Zones enabled for $_[0]}, + dxituu => q{DX ITU Zones disabled for $_[0]}, + dxs => q{DX Spots enabled for $_[0]}, + dxu => q{DX Spots disabled for $_[0]}, + e1 => q{Invalid command}, + e2 => q{Error: $_[0]}, + e3 => q{$_[0]: $_[1] not found}, + e4 => q{Need at least a prefix or callsign}, + e5 => q{Not Allowed}, + e6 => q{*** No station specified ***}, + e7 => q{callsign $_[0] not visible on the cluster}, + e8 => q{Need a callsign and some text}, + e9 => q{Need at least some text}, + e10 => q{$_[0] not connected locally}, + e11 => q{Can't use $_[0] as target}, + e12 => q{Need a node callsign}, + e13 => q{$_[0] is not a node}, + e14 => q{First argument must be numeric and > 0}, + e15 => q{invalid qualifier "$_[0]"}, + e16 => q{File "$_[0]" exists}, + e17 => q{Please don't use the words: @_ on here}, + e18 => q{Cannot connect to $_[0] ($!)}, + e19 => q{Invalid character(s) in line $_[0]}, + e20 => q{token '$_[0]' not recognised}, + e21 => q{$_[0] is not numeric}, + e22 => q{$_[0] is not a callsign}, + e23 => q{$_[0] is not a range (eg 0/30000)}, + e24 => q{Sorry, Internet access is not enabled}, + e25 => q{Sorry the value must be between $_[0] and $_[1]}, + e26 => q{Too many concurrent errors, you are being disconnected}, + e27 => q{$_[0] not a numeric or a callsign prefix'}, + e28 => q{Sorry, you need to be registered (SP $main::myalias to register)}, + e29 => q{Need a password}, + e30 => q{Cannot Open $_[0] $!}, + e31 => q{$_[0] is not a user'}, + e32 => q{Need a passphrase}, + e33 => q{$_[0] is not a number of days or a valid date}, + e34 => q{Need a GROUP and some text}, + e35 => q{You are not a member of $_[0], join $_[0]}, + e36 => q{You can only do this in normal user prompt state}, + e37 => q{Need at least a callsign}, + e38 => q{This is not a valid regex}, + e39 => q{Sorry $_[0] is not a valid argument}, + + echoon => q{Echoing enabled}, + echooff => q{Echoing disabled}, + echow => q{*Echoing is currently disabled, set/echo to enable}, + emaile1 => q{Please enter your email address, set/email }, + emaila => q{Your E-Mail Address is now "$_[0]"}, + email => q{E-mail address set to: $_[0]}, + export1 => q{usage: export }, + export2 => q{$_[3] has error exporting msg $_[0] to $_[1] ($_[2])}, + export3 => q{$_[2 ] exported msg $_[0] to $_[1]}, + filter1 => q{Filter $_[0] updated for $_[1]}, + filter2 => q{Unknown filter keyword $_[0]}, + filter3 => q{No filters defined for $_[0]}, + filter4 => q{$_[0]$_[1] Filter $_[2] deleted for $_[3]}, + filter5 => q{need some filter commands...}, + filter6 => q{$_[0]$_[1] Filter for $[2] not found}, + filter7 => q{$_[0] parse error $_[1] on $_[2]'}, + grayline1 => q{ Beg of End of}, + grayline2 => q{Location dd/mm/yyyy Dawn Rise Set Dusk}, + grids => q{DX Grid enabled for $_[0]}, + gridu => q{DX Grid disabled for $_[0]}, + gtks => q{GTK output enabled for $_[0]}, + gtku => q{GTK output disabled for $_[0]}, + illcall => q{Sorry, $_[0] is an invalid callsign}, + hasha => q{$_[0] already exists in $_[1]}, + hashb => q{$_[0] added to $_[1]}, + hashc => q{$_[0] removed from $_[1]}, + hashd => q{$_[0] not in $_[1]'}, + hashe => q{$_[0] set on $_[1]'}, + heading => q{Heading}, + helpe1 => q{Help system unavailable, tell sysop}, + helpe2 => q{No help available on $_[0]}, + heres => q{Here set on $_[0]}, + heade1 => q{Using $main::mycall Coords, consider doing a set/location or set/qra}, + hereu => q{Here unset on $_[0]}, + homebbs => q{Home BBS set to: $_[0]}, + homenode => q{Home Node set to: $_[0]}, + homenode2 => q{Home Node}, + hnodee1 => q{Please enter your Home Node, set/homenode }, + hnodee2 => q{Failed to set homenode on $_[0]}, + hnode => q{Your Homenode is now "$_[0]"}, + init1 => q{sent initialisation message to $_[0]}, + iso => q{$_[0] Isolated}, + isou => q{$_[0] UnIsolated}, + isoc => q{$_[0] created and Isolated}, + isoari => q{there is an input route filter for $_[0]; clear/route input $_[0] first}, + isoaro => q{there is an output route filter for $_[0]; clear/route $_[0] first}, + isow => q{$_[0] is isolated; unset/isolate $_[0] first}, + join => q{joining group $_[0]}, + l1 => q{Sorry $_[0], you are already logged on on another channel}, + l2 => q{Hello $_[0], this is $main::mycall in $main::myqth\nrunning DXSpider V$main::version build $main::build}, + lang => q{Language is now English}, + lange1 => q{set/language where is one of ($_[0])}, + lange2 => q{failed to set language on $_[0]'}, + lastconn => q{Last connect}, + leave => q{leaving group $_[0]}, + lgset => q{Added $_[0] to the local node group}, + lgunset => q{Removed $_[0] from the local node group}, + lh1 => q{$main::data/hop_table.pl doesn't exist}, + local1 => q{Local}, + loce1 => q{Please enter your location,, set/location }, + loce2 => q{Cannot recognise "$_[0]" as a Lat/Long (eg 52 20 N 0 16 E)}, + loce3 => q{$_[0] is a QRA locator, please use: set/qra $_[0]}, + loc => q{Your Lat/Long is now "$_[0]"}, + location => q{Location}, + lockout => q{$_[0] Locked out}, + lockoutc => q{$_[0] Created and Locked out}, + lockoutun => q{$_[0] Unlocked}, + lockoutuse => q{usage: sh/lockout |ALL}, + loginb => q{Buddy $_[0] has logged in}, + loginbn => q{Buddy $_[0] has logged in at $_[1]}, + logoutb => q{Buddy $_[0] has logged out}, + logoutbn => q{Buddy $_[0] has logged out from $_[1]}, + loginu => q{User $_[0] has logged in}, + logoutu => q{User $_[0] has logged out}, + loginn => q{Node $_[0] has logged in}, + logoutn => q{Node $_[0] has logged out}, + m1 => q{Enter Subject (30 characters):}, + m2 => q{Copy of msg $_[0] sent to $_[1]}, + m3 => q{Sorry, $_[0] is an unacceptable TO address}, + m4 => q{Sorry, can't access message $_[0]}, + m5 => q{Sorry, I need a message number'}, + m6 => q{Reply to: $_[0]}, + m7 => q{Subject : $_[0]}, + m8 => q{Enter lines of text, /EX to send or /ABORT to exit}, + m9 => q{New mail has arrived for you}, + m10 => q{Message/Script Aborted}, + m11 => q{Message no $_[0] saved and directed to $_[1]}, + m12 => q{Message no $_[0] deleted}, + m13 => q{Message no $_[0] missing}, + m14 => q{Message no $_[0] marked as sent to $_[1]}, + m15 => q{Message no $_[0] unmarked as sent to $_[1]}, + m16 => q{Need a Message number}, + m17 => q{Sorry, cannot send messages in $_[0] mode}, + m18 => q{Sorry, message $_[0] is currently set to KEEP}, + m19 => q{Startup Script for $_[0] saved, $_[1] lines}, + m20 => q{Startup Script for $_[0] deleted}, + m21 => q{$_[0] Working...}, + m22 => q{Startup Script for $_[0] not found/error $!}, + maxconnect => q{Max connections on $_[0] set to $_[1]}, + msg1 => q{Bulletin Messages Queued}, + msg2 => q{Private Messages Queued}, + msg3 => q{Msg $_[0]: $_[1] changed from $_[2] to $_[3]}, + msgu => q{usage: msg data...}, + merge1 => q{Merge request for $_[1] spots and $_[2] WWV sent to $_[0]}, + moon => q{Location dd/mm/yyyy Rise Set}, + moon_with_azel => q{Location dd/mm/yyyy Rise Set Azim Elev}, + mond => q{Monitoring Disabled}, + mone => q{Monitoring Enabled}, + name1 => q{Name}, + namee1 => q{Please enter your name, set/name }, + namee2 => q{Can't find user $_[0]!}, + name => q{Your name is now "$_[0]"}, + nodea => q{$_[0] set as AK1A style Node}, + nodeac => q{$_[0] created as AK1A style Node}, + nodeb => q{$_[0] set as BBS}, + nodebc => q{$_[0] created as BBS}, + nodec => q{$_[0] set as CLX style Node}, + nodecc => q{$_[0] created as CLX style Node}, + noder => q{$_[0] set as AR-Cluster style Node}, + noderc => q{$_[0] created as AR-Cluster style Node}, + nodes => q{$_[0] set as DXSpider style Node}, + nodesc => q{$_[0] created as DXSpider style Node}, + noden => q{$_[0] set as RBN Feed }, + nodenc => q{$_[0] created as RBN Feed}, + nodex => q{$_[0] set as DXNET style Node}, + nodexc => q{$_[0] created as DXNET style Node}, + nodeu => q{$_[0] set back as a User}, + nodee1 => q{You cannot use this command whilst your target ($_[0]) is on-line}, + notdone => q{NOT Done}, + nothere => q{Sorry, but $_[0] isn't here at the moment, please try later'}, + obscount => q{Ping obsolescence count on $_[0] set to $_[1]}, + ok => q{Operation successful}, + outconn => q{Outstanding connect to $_[0]}, + page => q{Press Enter to continue, A to abort ($_[0] lines) >}, + pagelth => q{Page Length is now $_[0] lines}, + pagewidth => q{Page width is now $_[0] columns}, + passerr => q{Please use: SET/PASS }, + passphrase => q{Passphrase set or changed for $_[0]}, + passphraseu => q{Passphrase removed for $_[0]}, + password => q{Password set or changed for $_[0]}, + passwordu => q{Password removed for $_[0]}, + pc90s => q{PC90 enabled for $_[0]}, + pc90u => q{PC90 disabled $_[0]}, + pingo => q{Ping Started to $_[0]}, + pingi => q{Ping Returned from $_[0] $_[1] (Ave $_[2]) secs}, + pinge1 => q{Cannot ping yourself!}, + pingint => q{Ping interval on $_[0] set to $_[1] secs}, + 'pos' => q{From Callsign: $_[0] Lat: $_[1] Long: $_[2]}, + pr => q{%C de %M %D %T dxspider >}, + prs => q{Prompt is changed}, + pru => q{Prompt now set back to default}, + priv => q{Privilege level changed on $_[0]}, + prx => q{$main::mycall >}, + pw0 => q{Enter old password: }, + pw1 => q{Enter new password: }, + pw2 => q{Re-enter new password: }, + pw3 => q{Password changed}, + pw4 => q{Passwords differ, password NOT changed}, + qll => q{Please enter your location with set/location or set/qra}, + qthe1 => q{Please enter your QTH, set/qth }, + qth => q{Your QTH is now "$_[0]"}, + qrae1 => q{Please enter your QRA locator, set/qra (eg set/qra JO02LQ)}, + qrashe1 => q{Please enter a QRA locator, eg sh/qra JO02LQ or sh/qra JO02LQ IO93NS}, + qrae2 => q{Cannot recognise "$_[0]" as a QRA locator (eg JO02LQ)}, + qra => q{Your QRA Locator is now "$_[0]"}, rbnusers => qq{RBN User List}, - qsl1 => 'Call Manager Times Last Time Seen De', - rcmdo => 'RCMD \"$_[0]\" sent to $_[1]', - read1 => 'Sorry, no new messages for you', - read2 => 'Msg $_[0] not found', - read3 => 'Msg $_[0] not available', - rec => '$_[0] records', - reg => '$_[0] registered', - regc => '$_[0] created and registered', - reginac => 'Registration is not active (set/var \$main::reqreg = 1 to activate)', - regun => '$_[0] unregistered', - route => '$_[0] on $_[1] via $_[2]', - sat1 => 'Tracking Table for $_[0] for the next $_[1] hours every $_[2] mins', - sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km', - sat3 => 'Syntax: SH/SAT [ ]', - sat4 => 'Satellites available/Age of Keps (days):-', - sat5 => 'need nnnnn.AMSAT in subject to load keps from this message', - satnf => 'Satellite $_[0] unknown', - satdisc => '-----', - set => '$_[0] enabled for $_[1]', - sethop1 => 'usage: set/hops ann|spots|wwv|wcy ', - sethop2 => '$_[0] hops set on $_[1]$_[2] for $_[3]', - sethop3 => 'No hops set for $_[0]', - showconf => 'Node Callsigns', - shu => '\"SHU\" is not enough! you need to type at least \"SHUT\" to shutdown the node', - shutting => '$main::mycall shutting down...', - skims => 'RBN/Skimming set to $_[1] for $_[0]', - sloc => 'Cluster lat $_[0] long $_[1], DON\'T FORGET TO CHANGE YOUR DXVars.pm', - snode1 => 'Node Call Sort Version', - snode2 => '$_[0] $_[1] $_[2]', - snode3 => '$_[0] Unknown Call', - sqra => 'Cluster QRA Locator$_[0], DON\'T FORGET TO CHANGE YOUR DXVars.pm', - sorry => 'Sorry', - spf1 => 'spoof: creating new user $_[0]', - stathf => 'HF DX Spot Stats, last $_[1] days from $_[0]', - stathft => 'HF DX Spot Stats, last $_[2] days from $_[1] for DXCC $_[0]', - statvhf => 'VHF+ DX Spot Stats, last $_[1] days from $_[0]', - statvhft => 'VHF+ DX Spot Stats, last $_[2] days from $_[1] for DXCC $_[0]', - statdx => 'Total DX Spots for $_[1] days from $_[0]', - storable => 'Please load the Storable module from CPAN', - sun => 'Location dd/mm/yyyy Rise Set', - sun_with_azel => 'Location dd/mm/yyyy Rise Set Azim Elev', - susdb1 => 'usage: callsign state city', - susdb2 => 'USDB $_[0] was $_[1], $_[2]', - susdb3 => 'USDB $_[0] now $_[1], $_[2]', - susdb4 => 'USDB $_[0] deleted', - suser1 => 'usage: callsign user_field_name value', - suser2 => 'User $_[0] not found', - suser3 => 'User field \'$_[0]\' was \'$_[1]\' now set to \'$_[2]\'', - suser4 => 'User field name \'$_[0]\' doesn\'t exist', - time1 => 'Local Time: $_[0] $_[1], UTC $_[2]', - time2 => '$_[0] Local (standard) time: $_[1] ($_[2] Hours)', - time3 => '$_[0] $_[1]', - talks => 'Talk enabled for $_[0]', - talku => 'Talk disabled for $_[0]', - talkend => 'Finished talking to you', - talkinst => 'Entering Talkmode, /EX to end, / to run a command', - talknh => 'Sorry $_[0] is not online at the moment', - talkprompt => 'Talk ($_[0])>', - talkstart => 'Starting talking to you', - unset => '$_[0] disabled for $_[1]', - unsethop1 => 'usage: unset/hops ann|spots|wwv|wcy', - unsethop2 => 'hops unset on $_[1] for $_[0]', - user => 'User', - userconn => 'Callsigns connected to', - usernf => '*** User record for $_[0] not found ***', - usstates => 'US State display enabled for $_[0]', - usstateu => 'US State display disabled for $_[0]', - wante => 'Want $_[0] enabled for $_[1]', - wantd => 'Want $_[0] disabled for $_[1]', - wcy1 => '$_[0] is missing or out of range', - wcy2 => 'Duplicate WCY', - wcy3 => 'Date Hour SFI A K Exp.K R SA GMF Aurora Logger', - wcys => 'WCY enabled for $_[0]', - wcyu => 'WCY disabled for $_[0]', - wpc16s => 'Allow PC16 from $_[0] enabled', - wpc16u => 'Allow PC16 from $_[0] disabled', - wpc19s => 'Route PC19 for $_[0] enabled', - wpc19u => 'Route PC19 for $_[0] disabled', - wpc9xs => 'PC9X for $_[0] enabled', - wpc9xu => 'PC9X for $_[0] disabled', - wwv1 => '$_[0] is missing or out of range', - wwv2 => 'Duplicate WWV', - wwv3 => 'Date Hour SFI A K Forecast Logger', - wwvs => 'WWV enabled for $_[0]', - wwvu => 'WWV disabled $_[0]', - wxs => 'WX enabled for $_[0]', - wxu => 'WX disabled for $_[0]', + qsl1 => q{Call Manager Times Last Time Seen De}, + rcmdo => q{RCMD "$_[0]" sent to $_[1]}, + read1 => q{Sorry, no new messages for you}, + read2 => q{Msg $_[0] not found}, + read3 => q{Msg $_[0] not available}, + rec => q{$_[0] records}, + reg => q{$_[0] registered}, + regc => q{$_[0] created and registered}, + reginac => q{Registration is not active (set/var $main::reqreg = 1 to activate)}, + regun => q{$_[0] unregistered}, + route => q{$_[0] on $_[1] via $_[2]}, + sat1 => q{Tracking Table for $_[0] for the next $_[1] hours every $_[2] mins}, + sat2 => q{dd/mm UTC Lat Lon Alt Km Az El Dist Km}, + sat3 => q{Syntax: SH/SAT [ ]}, + sat4 => q{Satellites available/Age of Keps (days):-}, + sat5 => q{need nnnnn.AMSAT in subject to load keps from this message}, + satnf => q{Satellite $_[0] unknown}, + satdisc => q{-----}, + set => q{$_[0] enabled for $_[1]}, + sethop1 => q{usage: set/hops ann|spots|wwv|wcy }, + sethop2 => q{$_[0] hops set on $_[1]$_[2] for $_[3]'}, + sethop3 => q{No hops set for $_[0]'}, + showconf => q{Node Callsigns}, + shu => q{"SHU" is not enough! you need to type at least "SHUT" to shutdown the node}, + shutting => q{$main::mycall shutting down...}, + skims => q{RBN/Skimming set to $_[1] for $_[0]}, + sloc => q{Cluster lat $_[0] long $_[1], DON'T FORGET TO CHANGE YOUR DXVars.pm}, + snode1 => q{Node Call Sort Version}, + snode2 => q{$_[0] $_[1] $_[2]}, + snode3 => q{$_[0] Unknown Call}, + sqra => q{Cluster QRA Locator$_[0], DON'T FORGET TO CHANGE YOUR DXVars.pm}, + sorry => q{Sorry}, + spf1 => q{spoof: creating new user $_[0]}, + stathf => q{HF DX Spot Stats, last $_[1] days from $_[0]}, + stathft => q{HF DX Spot Stats, last $_[2] days from $_[1] for DXCC $_[0]}, + statvhf => q{VHF+ DX Spot Stats, last $_[1] days from $_[0]}, + statvhft => q{VHF+ DX Spot Stats, last $_[2] days from $_[1] for DXCC $_[0]}, + statdx => q{Total DX Spots for $_[1] days from $_[0]}, + storable => q{Please load the Storable module from CPAN'}, + sun => q{Location dd/mm/yyyy Rise Set}, + sun_with_azel => q{Location dd/mm/yyyy Rise Set Azim Elev}, + susdb1 => q{usage: callsign state city}, + susdb2 => q{USDB $_[0] was $_[1], $_[2]}, + susdb3 => q{USDB $_[0] now $_[1], $_[2]}, + susdb4 => q{USDB $_[0] deleted}, + suser1 => q{usage: callsign user_field_name value}, + suser2 => q{User $_[0] not found}, + suser3 => q{User field '$_[0]' was '$_[1]' now set to '$_[2]'}, + suser4 => q{User field name '$_[0]' doesn't exist}, + time1 => q{Local Time: $_[0] $_[1], UTC $_[2]}, + time2 => q{$_[0] Local (standard) time: $_[1] ($_[2] Hours)}, + time3 => q{$_[0] $_[1]}, + talks => q{Talk enabled for $_[0]}, + talku => q{Talk disabled for $_[0]}, + talkend => q{Finished talking to you}, + talkinst => q{Entering Talkmode, /EX to end, / to run a command}, + talknh => q{Sorry $_[0] is not online at the moment}, + talkprompt => q{Talk ($_[0])>}, + talkstart => q{Starting talking to you}, + unset => q{$_[0] disabled for $_[1]}, + unsethop1 => q{usage: unset/hops ann|spots|wwv|wcy}, + unsethop2 => q{hops unset on $_[1] for $_[0]'}, + user => q{User}, + userconn => q{Callsigns connected to}, + usernf => q{*** User record for $_[0] not found ***}, + usstates => q{US State display enabled for $_[0]}, + usstateu => q{US State display disabled for $_[0]}, + wante => q{Want $_[0] enabled for $_[1]}, + wantd => q{Want $_[0] disabled for $_[1]}, + wcy1 => q{$_[0] is missing or out of range}, + wcy2 => q{Duplicate WCY}, + wcy3 => q{Date Hour SFI A K Exp.K R SA GMF Aurora Logger}, + wcys => q{WCY enabled for $_[0]}, + wcyu => q{WCY disabled for $_[0]}, + wpc16s => q{Allow PC16 from $_[0] enabled}, + wpc16u => q{Allow PC16 from $_[0] disabled}, + wpc19s => q{Route PC19 for $_[0] enabled}, + wpc19u => q{Route PC19 for $_[0] disabled}, + wpc9xs => q{PC9X for $_[0] enabled}, + wpc9xu => q{PC9X for $_[0] disabled}, + wwv1 => q{$_[0] is missing or out of range}, + wwv2 => q{Duplicate WWV}, + wwv3 => q{Date Hour SFI A K Forecast Logger}, + wwvs => q{WWV enabled for $_[0]}, + wwvu => q{WWV disabled $_[0]}, + wxs => q{WX enabled for $_[0]}, + wxu => q{WX disabled for $_[0]}, }, nl => { - addr => 'Addres gezet op: $_[0]', - already => '$_[0] reeds geconnect', - anns => 'Announce berichten AAN gezet voor $_[0]', - annu => 'Announce berichten UIT gezet voor $_[0]', - bbse1 => 'Geef je home bbs (mailbox),, set/bbs ', - bbs => 'Je home bbs (mailbox) is nu \"$_[0]\"', - beepoff => 'De beep staat nu UIT', - beepon => 'De beep staat nu AAN', - conother => 'Sorry $_[0] je bent reeds geconnect op een andere poort', - concluster => 'Sorry $_[0] je bent reeds op een ander cluster geconnect', - conscript => 'Geen connectscript aangeroepen \"$_[0]\" gevonden in $main::root/connect', - confail => 'Verbinding met $_[0] mislukt ($_[1])', - constart => 'Verbinding met $_[0] gestart', - disc1 => 'Gedisconnect door $_[0]', - disc2 => '$_[0] gedisconnect', - dx1 => 'Frequentie $_[0] valt niet binnen een band [Opdracht: DX freq call commentaar](Zie sh/band)', - dx2 => 'Ik heb een call nodig! [Opdracht: DX freq call commentaar]', - dxs => 'DX Spots worden WEL doorgegeven aan $_[0]', - dxu => 'DX Spots worden NIET doorgegeven aan $_[0]', - e1 => 'Ongeldige opdracht', - e2 => 'Fout: $_[0]', - e3 => '$_[0]: $_[1] niet gevonden', - e4 => 'Minimaal een prefix of een call nodig', - e5 => 'Niet toegestaan', - e6 => '*** Geen station gespecifiseerd ***', - e7 => 'Callsign $_[0] is niet zichtbaar op het cluster', - e8 => 'Ik heb een call en tekst nodig', - e9 => 'Ik heb wel tekst nodig voor een announce!', - e10 => '$_[0] is niet lokaal verbonden', - e12 => 'Ik heb een node call nodig', - e13 => '$_[0] is geen node', - emaile1 => 'Geef uw E-mail addres, set/email ', - emaila => 'Uw E-Mail addres is nu \"$_[0]\"', - email => 'E-mail addres gezet op: $_[0]', - helpe1 => 'Help systeem niet beschikbaar, meld dit aan de sysop', - helpe2 => 'Geen help beschikbaar over \"$_[0]\"', - heres => 'Aanwezigheid AAN gezet voor $_[0]', - heade1 => 'Gebruik gemaakt van de $main::mycall coordinaten, overweeg een set/location of set/qra', - hereu => 'Aanwezigheid UIT gezet voor $_[0]', - homebbs => 'Uw Home mailbox is nu $_[0]', - homenode => 'Uw (Home) DX-Cluster is : $_[0]', - hnodee1 => 'Geef mij uw lokale (home) DX-cluster, set/homenode ', - hnode => 'Uw (home) DX-cluster is nu \"$_[0]\"', - iso => '$_[0] is geisoleerd (Isolated)', - isou => '$_[0] is niet meer geisoleerd (UnIsolated)', - isoc => '$_[0] gecreerd en geisoleerd (Isolated)', - l1 => 'Sorry $_[0], u bent reeds op een ander kanaal ingelogt', - l2 => 'Hallo $_[0], dit is $main::mycall in $main::myqth met DXSpider V$main::version', - lang => 'De taal zijn nu Nederlandse', - lh1 => '$main::data/hop_table.pl bestaat niet', - loce1 => 'Geef uw coordinaten met, set/location ', - loce2 => 'Herken \"$_[0]\" niet als Lat/Long (vb 52 20 N 0 16 E)', - loc => 'Uw Latitude en Longitude zijn nu \"$_[0]\"', - lockout => '$_[0] heeft geen toegang meer (Locked out)', - lockoutun => '$_[0] heeft wederom toegang (Unlocked)', - m2 => '$_[0] Informatie: $_[1]', - merge1 => 'Merge verzoek voor $_[1] spots en $_[2] WWV verzonden naar $_[0]', - msgnew => 'Er is nieuwe post gearriveerd voor u', - namee1 => 'Geef aub uw naam met, set/name ', - namee2 => 'Gebruiker $_[0] niet te vinden!', - name => 'Uw naam is gezet op \"$_[0]\"', - node => '$_[0] gezet als een AK1A stijl DX-cluster', - nodeu => '$_[0] teruggezet naar gebruiker status', - nodec => '$_[0] gecreeerd als AK1A stijl DX-cluster', - nodee1 => 'U kunt deze opdracht niet uitvoeren zolang ($_[0]) on-line is', - ok => 'Opdracht succesvol uitgevoerd', - page => 'Druk op Enter om door te gaan, A om af te breken (nog $_[0] regels) >', - pagelth => 'Paginalengte gezet op ($_[0]) regels', - passerr => 'Gebruik: SET/PASS ', - password => 'Wachtwoord gezet of gewijzigd voor $_[0]', - pingo => 'Ping gestart naar $_[0]', - pingi => 'Ping ontvangen van $_[0] $_[1] (Ave $_[2]) secs', - priv => 'Privilege level gewijzigd op $_[0]', - prx => '$main::mycall >', - qll => 'Geef uw locator met set/location of set/qra', - qthe1 => 'Geef uw woonplaats met, set/qth ', - qth => 'Uw QTH is nu \"$_[0]\"', - qrae1 => 'Geef uw QRA locator, set/qra (vb set/qra JO33FD)', - qrashe1 => 'Geef uw QRA locator, vbg sh/qra JO33FD of sh/qra JO33FD IO93NS', - qrae2 => 'Ik herken \"$_[0]\" niet als een QRA locator (vb JO33FD)', - qra => 'Uw QRA Locator is nu \"$_[0]\"', - rcmdo => 'RCMD \"$_[0]\" verzonden naar $_[1]', - read1 => 'Sorry, geen berichten voor u', - read2 => 'Bericht $_[0] niet gevonden', - read3 => 'Bericht $_[0] niet beschikbaar', - shutting => '$main::mycall gaat QRT...', - sloc => 'Cluster lat $_[0] long $_[1], DON\'T FORGET TO CHANGE YOUR DXVars.pm', - sqra => 'Cluster QRA Locator$_[0], DON\'T FORGET TO CHANGE YOUR DXVars.pm', - talks => 'Talk berichten AAN gezet voor $_[0]', - talku => 'Talk berichten UIT gezet voor $_[0]', - usernf => '*** Gebruiker info van $_[0] niet gevonden ***', - wwvs => 'WWV berichten AAN gezet voor $_[0]', - wwvu => 'WWV berichten UIT gezet voor $_[0]', - wxs => 'WX berichten AAN gezet voor $_[0]', - wxu => 'WX berichten UIT gezet voor $_[0]', + addr => q{Addres gezet op: $_[0]}, + already => q{$_[0] reeds geconnect}, + anns => q{Announce berichten AAN gezet voor $_[0]}, + annu => q{Announce berichten UIT gezet voor $_[0]}, + bbse1 => q{Geef je home bbs (mailbox),, set/bbs }, + bbs => q{Je home bbs (mailbox) is nu "$_[0]"}, + beepoff => q{De beep staat nu UIT}, + beepon => q{De beep staat nu AAN}, + conother => q{Sorry $_[0] je bent reeds geconnect op een andere poort}, + concluster => q{Sorry $_[0] je bent reeds op een ander cluster geconnect}, + conscript => q{Geen connectscript aangeroepen "$_[0]" gevonden in $main::root/connect}, + confail => q{Verbinding met $_[0] mislukt ($_[1])}, + constart => q{Verbinding met $_[0] gestart}, + disc1 => q{Gedisconnect door $_[0]}, + disc2 => q{$_[0] gedisconnect}, + dx1 => q{Frequentie $_[0] valt niet binnen een band [Opdracht: DX freq call commentaar](Zie sh/band)}, + dx2 => q{Ik heb een call nodig! [Opdracht: DX freq call commentaar]}, + dxs => q{DX Spots worden WEL doorgegeven aan $_[0]}, + dxu => q{DX Spots worden NIET doorgegeven aan $_[0]}, + e1 => q{Ongeldige opdracht}, + e2 => q{Fout: $_[0]}, + e3 => q{$_[0]: $_[1] niet gevonden}, + e4 => q{Minimaal een prefix of een call nodig}, + e5 => q{Niet toegestaan}, + e6 => q{*** Geen station gespecifiseerd ***}, + e7 => q{Callsign $_[0] is niet zichtbaar op het cluster}, + e8 => q{Ik heb een call en tekst nodig}, + e9 => q{Ik heb wel tekst nodig voor een announce!}, + e10 => q{$_[0] is niet lokaal verbonden}, + e12 => q{Ik heb een node call nodig}, + e13 => q{$_[0] is geen node}, + emaile1 => q{Geef uw E-mail addres, set/email }, + emaila => q{Uw E-Mail addres is nu "$_[0]"}, + email => q{E-mail addres gezet op: $_[0]}, + helpe1 => q{Help systeem niet beschikbaar, meld dit aan de sysop}, + helpe2 => q{Geen help beschikbaar over "$_[0]"}, + heres => q{Aanwezigheid AAN gezet voor $_[0]}, + heade1 => q{Gebruik gemaakt van de $main::mycall coordinaten, overweeg een set/location of set/qra}, + hereu => q{Aanwezigheid UIT gezet voor $_[0]}, + homebbs => q{Uw Home mailbox is nu $_[0]}, + homenode => q{Uw (Home) DX-Cluster is : $_[0]}, + hnodee1 => q{Geef mij uw lokale (home) DX-cluster, set/homenode }, + hnode => q{Uw (home) DX-cluster is nu "$_[0]"}, + iso => q{$_[0] is geisoleerd (Isolated)}, + isou => q{$_[0] is niet meer geisoleerd (UnIsolated)}, + isoc => q{$_[0] gecreerd en geisoleerd (Isolated)}, + l1 => q{Sorry $_[0], u bent reeds op een ander kanaal ingelogt}, + l2 => q{Hallo $_[0], dit is $main::mycall in $main::myqth met DXSpider V$main::version}, + lang => q{De taal zijn nu Nederlandse}, + lh1 => q{$main::data/hop_table.pl bestaat niet}, + loce1 => q{Geef uw coordinaten met, set/location }, + loce2 => q{Herken "$_[0]" niet als Lat/Long (vb 52 20 N 0 16 E)}, + loc => q{Uw Latitude en Longitude zijn nu "$_[0]"}, + lockout => q{$_[0] heeft geen toegang meer (Locked out)}, + lockoutun => q{$_[0] heeft wederom toegang (Unlocked)}, + m2 => q{$_[0] Informatie: $_[1]}, + merge1 => q{Merge verzoek voor $_[1] spots en $_[2] WWV verzonden naar $_[0]}, + msgnew => q{Er is nieuwe post gearriveerd voor u}, + namee1 => q{Geef aub uw naam met, set/name }, + namee2 => q{Gebruiker $_[0] niet te vinden!}, + name => q{Uw naam is gezet op "$_[0]"}, + node => q{$_[0] gezet als een AK1A stijl DX-cluster}, + nodeu => q{$_[0] teruggezet naar gebruiker status}, + nodec => q{$_[0] gecreeerd als AK1A stijl DX-cluster}, + nodee1 => q{U kunt deze opdracht niet uitvoeren zolang ($_[0]) on-line is}, + ok => q{Opdracht succesvol uitgevoerd}, + page => q{Druk op Enter om door te gaan, A om af te breken (nog $_[0] regels) >}, + pagelth => q{Paginalengte gezet op ($_[0]) regels}, + passerr => q{Gebruik: SET/PASS }, + password => q{Wachtwoord gezet of gewijzigd voor $_[0]}, + pingo => q{Ping gestart naar $_[0]}, + pingi => q{Ping ontvangen van $_[0] $_[1] (Ave $_[2]) secs}, + priv => q{Privilege level gewijzigd op $_[0]}, + prx => q{$main::mycall >}, + qll => q{Geef uw locator met set/location of set/qra}, + qthe1 => q{Geef uw woonplaats met, set/qth }, + qth => q{Uw QTH is nu "$_[0]"}, + qrae1 => q{Geef uw QRA locator, set/qra (vb set/qra JO33FD)}, + qrashe1 => q{Geef uw QRA locator, vbg sh/qra JO33FD of sh/qra JO33FD IO93NS}, + qrae2 => q{Ik herken "$_[0]" niet als een QRA locator (vb JO33FD)}, + qra => q{Uw QRA Locator is nu "$_[0]"}, + rcmdo => q{RCMD "$_[0]" verzonden naar $_[1]}, + read1 => q{Sorry, geen berichten voor u}, + read2 => q{Bericht $_[0] niet gevonden}, + read3 => q{Bericht $_[0] niet beschikbaar}, + shutting => q{$main::mycall gaat QRT...}, + sloc => q{Cluster lat $_[0] long $_[1], DON'T FORGET TO CHANGE YOUR DXVars.pm}, + sqra => q{Cluster QRA Locator$_[0], DON'T FORGET TO CHANGE YOUR DXVars.pm}, + talks => q{Talk berichten AAN gezet voor $_[0]}, + talku => q{Talk berichten UIT gezet voor $_[0]}, + usernf => q{*** Gebruiker info van $_[0] niet gevonden ***}, + wwvs => q{WWV berichten AAN gezet voor $_[0]}, + wwvu => q{WWV berichten UIT gezet voor $_[0]}, + wxs => q{WX berichten AAN gezet voor $_[0]}, + wxu => q{WX berichten UIT gezet voor $_[0]}, }, fr => { - addr => 'Adresse fixée à : $_[0]', - already => '$_[0] déjà connecté', - anns => 'Annonces activées pour $_[0]', - annu => 'Annonces désactivées pour $_[0]', - annts => 'AnnTalk activé pour $_[0]', - anntu => 'AnnTalk désactivé pour $_[0]', - at => 'connecté en ce moment sur', - badnode1 => 'Le serveur $_[0] est maintenant en rejet', - badnode2 => 'Le serveur $_[0] n\'est maintenant plus en rejet', - badnode3 => 'Liste des serveurs en rejet :-', - bbse1 => 'Veuillez entrer l\'adresse de votre BBS avec : set/bbs ', - bbs => 'Votre BBS est définie comme étant \"$_[0]\"', - beepoff => 'Bips désactivés', - beepon => 'Bips activés', - call1 => 'Recherche de l\'indicatif via $_[0]:', - conother => 'Désolé $_[0], vous êtes déjà connecté sur un autre port', - concluster => 'Désolé $_[0], vous êtes déjà connecté ailleurs au cluster (sur $_[1])', - conscript => 'Pas de script de connexion \"$_[0]\" dans $main::root/connect !', - confail => 'Echec de la connexion avec $_[0] ($_[1])', - constart => 'Etablissement de la connexion avec $_[0]', - deluser => 'L\'utilisateur $_[0] a été supprimé', - db1 => 'Cette base de données est hébergée sur $_[0]', - db2 => 'Désolé, mais la clé: $_[0] est introuvable dans $_[1]', - db3 => 'Désolé, la base de données $_[0] n\'existe pas ici', - db4 => 'Désolé, la base de données $_[0] sur $_[1] n\'est pas en ligne actuellement', - db5 => 'Accès à la base de données distante sur $_[0] en cours...veuillez patienter !', - db6 => 'La base de données $_[0] existe déjà; vous devez d\'abord la supprimer', - db7 => 'Base de données $_[0] créée pour le serveur distant $_[1]', - db8 => 'Base de données $_[0] créée en local', - db9 => 'Base de données $_[0] supprimée', - db10 => '$_[0] enregistrements importés dans $_[1]', - db11 => 'Envoi de votre requête à $_[0], veuillez patienter...', - db12 => 'Base de données Serveur Commande Chaînage', - dfreq1 => 'Fréquence $_[0] non valable. Il faut par exemple: 0/30000 ou hf ou hf/cw', - dir1 => 'Aucun message trouvé !', - disc1 => 'Déconnecté par $_[0]', - disc2 => 'Canal $_[0] déconnecté', - disc3 => 'Pas de canal, mais connexion $_[0] terminée', - disc4 => 'Pas de canal ni de connexion mais "orphelin" $_[0] déconnecté', - done => 'Terminé.', - dup => 'Désolé, ceci est un doublon.', - dx1 => 'La fréquence $_[0] est hors bande (voir show/band); syntaxe: DX [BY indicatif] fréquence indicatif remarques', - dx2 => 'L\'indicatif manque; syntaxe : DX [BY indicatif] fréquence indicatif remarques', - dx3 => 'Indicatif ou fréquence non valable.', - dxcqs => 'Zones DX CQ activées pour $_[0]', - dxcqu => 'Zones DX CQ désactivées pour $_[0]', - dxitus => 'Zones DX UIT activées pour $_[0]', - dxituu => 'Zones DX UIT désactivées pour $_[0]', - dxs => 'Infos DX activées pour $_[0]', - dxu => 'Infos DX désactivées pour $_[0]', - e1 => 'Commande inconnue', - e2 => 'Erreur: $_[0]', - e3 => '$_[0]: $_[1] non trouvé', - e4 => 'Il faut au moins un préfixe ou un indicatif', - e5 => 'Non autorisé.', - e6 => '*** Aucune station spécifiée ***', - e7 => '$_[0] n\'est pas atteignable sur le cluster', - e8 => 'Il faut un indicatif et du texte.', - e9 => 'Il faut un texte.', - e10 => '$_[0] n\'est pas connecté localement', - e11 => 'Le destinataire ne peut pas être $main:mycall', - e12 => 'Il faut spécifier un indicatif de serveur !', - e13 => '$_[0] n\'est pas un serveur', - e14 => 'Le premier argument doit être une valeur numérique > 0', - e15 => 'Paramètre incorrect : \"$_[0]\"', - e16 => 'Le fichier \"$_[0]\" existe déjà', - e17 => 'Prière de ne pas utiliser les mots : @_ ici !', - e18 => 'Connexion impossible avec $_[0] ($!)', - e19 => 'Caractère non valide dans la ligne $_[0]', - e20 => 'Symbole $_[0] non reconnu', - e21 => '$_[0] n\'est pas une valeur numérique', - e22 => '$_[0] n\'est pas un indicatif', - e23 => '$_[0] n\'est pas un intervalle (exemple: 0/30000)', - e24 => 'Désolé, l\'accès à Internet n\'est pas actif', - e25 => 'Désolé, la valeur doit être entre $_[0] et $_[1]', - e26 => 'Trop d\'erreurs simultanées; vous allez être déconnecté !', - e27 => '$_[0] n\'est un préfixe ni sa valeur numérique.', - e28 => 'Désolé, vous devez d\'abord vous enregistrer (SP $main::myalias pour ce faire)', - e29 => 'Il faut un mot de passe !', - e30 => 'Impossible d\'ouvrir $_[0] $!', - e31 => '$_[0] n\'est pas un utilisateur', - e32 => 'Il faut une phrase secrète !', - e33 => '$_[0] n\'est pas un nombre de jours ou une date valable', - e34 => 'Il faut un GROUPE puis du texte', - e35 => 'Vous n\'êtes pas un membre de $_[0], rejoignez $_[0]', - echoon => 'Echo activé', - echooff => 'Echo désactivé', - echow => 'L\'écho est actuellement désactivé (set/echo pour l\'activer)', - emaile1 => 'Veuillez entrer votre adresse e-mail avec : set/email ', - emaila => 'Votre adresse e-mail est enregistrée comme étant \"$_[0]\"', - email => 'Adresse e-mail définie comme étant $_[0]', - export1 => 'Syntaxe: export ', - export2 => '$_[3] rencontre une erreur à l\'exportation du message $_[0] vers $_[1] ($_[2])', - export3 => '$_[2 ] a exporté le message $_[0] vers $_[1]', - filter1 => 'Filtre $_[0] mis à jour dans $_[1]', - filter2 => 'Mot clé de filtrage inconnu : $_[0]', - filter3 => 'Pas de filtres définis pour $_[0]', - filter4 => '$_[0]$_[1] Filtre $_[2] supprimé pour $_[3]', - filter5 => 'Il faut une commande de filtrage...', - filter6 => '$_[0]$_[1] Filtre pour $[2] introuvable', - grids => 'Fonction DX Grid activée pour $_[0]', - gridu => 'Fonction DX Grid désactivée pour $_[0]', - illcall => 'Désolé, $_[0] n\'est pas un indicatif valable', - hasha => '$_[0] existe déjà dans $_[1]', - hashb => '$_[0] ajouté à $_[1]', - hashc => '$_[0] retiré de $_[1]', - hashd => '$_[0] n\'est pas dans $_[1]', - hashe => '$_[0] ajouté le $_[1]', - heading => 'Azimut', - helpe1 => 'Système d\'aide non disponible, prière de prévenir le sysop', - helpe2 => 'Pas d\'aide disponible sur $_[0]', - heres => '$_[0] est présent', - heade1 => 'Calcul avec les coordonnées de $main::mycall; pensez à faire un set/location ou set/qra !', - hereu => '$_[0] est absent', - homebbs => 'BBS usuelle définie comme étant $_[0]', - homenode => 'Serveur cluster usuel défini comme étant $_[0]', - homenode2 => 'Utilise', - hnodee1 => 'Veuillez entrer votre serveur cluster usuel (set/homenode )', - hnodee2 => 'Impossible de définir votre serveur usuel comme étant $_[0]', - hnode => 'Votre serveur cluster usuel est défini comme étant \"$_[0]\"', - init1 => 'Message d\'initialisation envoyé à $_[0]', - iso => '$_[0] isolé', - isou => '$_[0] n\'est plus isolé', - isoc => '$_[0] créé et isolé', - isoari => 'Il existe un filtre de route entrante pour $_[0]; utilisez d\'abord clear/route $_[0]', - isoaro => 'Il existe un filtre de route sortante pour $_[0]; utilisez d\'abord clear/route $_[0]', - isow => '$_[0] est isolé; utilisez d\'abord unset/isolate $_[0]', - join => 'Affiliation au groupe $_[0]', - l1 => 'Désolé $_[0], vous êtes déjà connecté sur un autre canal', - l2 => 'Bonjour $_[0], bienvenue sur $main::mycall à $main::myqth\nServeur DXSpider V$main::version ($main::build)', - lang => 'Je parle maintenant français', - lange1 => 'Syntaxe : set/language , où est à choisir parmi ($_[0])', - lange2 => 'Impossible de fixer la langue à $_[0]', - lastconn => 'Dernière conn', - leave => 'Départ du groupe $_[0]', - lh1 => '$main::data/hop_table.pl n\'existe pas', - local1 => 'Local', - loce1 => 'Veuillez entrer vos coordonnées avec : set/location ', - loce2 => '\"$_[0]\" n\'est visiblement pas une latitude/longitude (ex: 46 20 N 6 12 E)', - loce3 => '$_[0] est un QTH locator, veuillez utiliser : set/qra $_[0]', - loc => 'Votre latitude/longitude est enregistrée comme étant \"$_[0]\"', - location => 'Coordonnées', - lockout => '$_[0] exclus', - lockoutc => '$_[0] créé et exclus', - lockoutun => '$_[0] n\'est plus exclus', - lockoutuse => 'Syntaxe : sh/lockout |ALL', - loginu => 'L\'utilisateur $_[0] s\'est connecté', - logoutu => 'L\'utilisateur $_[0] s\'est déconnecté', - loginn => 'Le serveur $_[0] s\'est connecté', - logoutn => 'Le serveur $_[0] s\'est déconnecté', - m1 => 'Veuillez entrer le sujet (max. 30 caractères):', - m2 => 'Copie du message $_[0] envoyée à $_[1]', - m3 => 'Désolé, $_[0] n\'est pas une adresse de destination acceptable', - m4 => 'Désolé, impossible d\'accéder au message $_[0]', - m5 => 'Il faut spécifier un numéro de message !', - m6 => 'Réponse à : $_[0]', - m7 => 'Sujet : $_[0]', - m8 => 'Entrez maintenant le texte (fin avec ou /EX, abandon avec /ABORT)', - m9 => 'Vous avez du nouveau courrier (tapez R pour le lire)', - m10 => 'Entrée du message abandonnée', - m11 => 'Message numéro $_[0] enregistré et transmis à $_[1]', - m12 => 'Message numéro $_[0] supprimé', - m13 => 'Message numéro $_[0] introuvable', - m14 => 'Message numéro $_[0] marqué comme envoyé à $_[1]', - m15 => 'Message numéro $_[0] marqué comme non envoyé à $_[1]', - m16 => 'Il faut un numéro de message !', - m17 => 'Désolé, impossible d\'envoyer des messages en mode $_[0]', - m18 => 'Désolé, le message $_[0] possède actuellement le statut KEEP', - msg1 => 'Bulletins mis en file d\'attente', - msg2 => 'Messages personnels mis en file d\'attente', - msg3 => 'Message $_[0]: $_[1] changé de $_[2] en $_[3]', - msgu => 'Syntaxe: msg données...', - merge1 => 'Demande de fusionnement de $_[1] infos DX et $_[2] WWV envoyée à $_[0]', - moon => 'Emplacement jj/mm/aaaa Lever Coucher', - moon_with_azel => 'Emplacement jj/mm/aaaa Lever Coucher Azim Elev', - mond => 'Monitoring désactivé', - mone => 'Monitoring activé', - name1 => 'Nom', - namee1 => 'Veuillez entrer votre nom avec : set/name ', - namee2 => 'Utilisateur $_[0] introuvable.', - name => 'Votre nom est enregistré comme étant \"$_[0]\"', - nodea => '$_[0] défini comme serveur de type AK1A', - nodeac => '$_[0] créé comme serveur de type AK1A', - nodeb => '$_[0] défini comme BBS', - nodebc => '$_[0] créé comme BBS', - nodec => '$_[0] défini comme serveur de type CLX', - nodecc => '$_[0] créé comme serveur de type CLX', - noder => '$_[0] défini comme serveur de type AR-Cluster', - noderc => '$_[0] créé comme serveur de type AR-Cluster', - nodes => '$_[0] défini comme serveur de type DXSpider', - nodesc => '$_[0] créé comme serveur de type DXSpider', - nodex => '$_[0] défini comme serveur de type DXNET', - nodexc => '$_[0] créé comme serveur de type DXNET', - nodeu => '$_[0] défini comme utilisateur', - nodee1 => 'Vous ne pouvez pas utiliser cette commande pendant que sa cible ($_[0]) est en ligne', - notdone => 'PAS fait', - nothere => 'désolé, $_[0] n\'est pas là en ce moment...', - obscount => 'Compteur d\'obsolescence des pings vers $_[0] mis à $_[1]', - ok => 'Opération réussie', - outconn => 'Connexion en cours avec $_[0]', - page => ' pour continuer ou pour arrêter (il reste $_[0] lignes) >', - pagelth => 'Longueur de page fixée à $_[0]', - passerr => 'Veuillez utiliser: SET/PASS ', - passphrase => 'Phrase secrète définie ou modifiée pour $_[0]', - passphraseu => 'Phrase secrète supprimée pour $_[0]', - password => 'Mot de passe défini ou modifié pour $_[0]', - passwordu => 'Mot de passe supprimé pour $_[0]', - pc90s => 'PC90 activé pour $_[0]', - pc90u => 'PC90 désactivé pour $_[0]', - pingo => 'Ping envoyé vers $_[0]', - pingi => 'Ping retourné par $_[0] en $_[1] (moyenne $_[2]) secondes', - pinge1 => 'Vous ne pouvez pas vous pinger vous-même !', - pingint => 'Intervalle de ping vers $_[0] fixé à $_[1] secondes', - 'pos' => 'Indicatif source : latitude $_[0] : longitude $_[1] : $_[2]', - prs => 'Prompt défini comme étant \"$_[0]\"', - pru => 'Prompt remis à sa valeur par défaut', - priv => 'Niveau de privilège changé en $_[0]', - prx => '$main::mycall >', - pw0 => 'Entrez l\'ancien mot de passe : ', - pw1 => 'Entrez le nouveau mot de passe : ', - pw2 => 'Confirmez le nouveau mot de passe : ', - pw3 => 'Mot de passe modifié', - pw4 => 'Les mots de passe sont différents, changement PAS effectué', - qll => 'Veuillez entrer votre emplacement avec set/location ou set/qra', - qthe1 => 'Veuillez entrer votre QTH, set/qth ', - qth => 'Votre QTH est enregistré comme étant \"$_[0]\"', - qrae1 => 'Veuillez entrer votre QRA locator, set/qra (exemple : set/qra JN36BE)', - qrashe1 => 'Veuillez entrer un QRA locator, par exemple: sh/qra JN36BE or sh/qra JN36BE JO31NS', - qrae2 => '\"$_[0]\" n\'est pas un QRA locator (exemple: JN36BE)', - qra => 'Votre QRA Locator est enregistré comme étant \"$_[0]\"', - qsl1 => 'Indicatif Manager Fois Dernière annonce Par', - rcmdo => 'RCMD \"$_[0]\" envoyé à $_[1]', - read1 => 'Désolé, pas de nouveaux messages pour vous.', - read2 => 'Message $_[0] introuvable', - read3 => 'Message $_[0] non disponible', - rec => '$_[0] enregistrements', - reg => '$_[0] enregistré', - regc => '$_[0] créé et enregistré', - reginac => 'Le mode Enregistré n\'est pas actif (set/var \$main::reqreg = 1 pour l\'activer)', - regun => 'Enregistrement de $_[0] supprimé', - route => '$_[0] sur $_[1] via $_[2]', - sat1 => 'Table de poursuite pour $_[0] pour les prochaines $_[1] heures toutes les $_[2] minutes', - sat2 => 'jj/mm UTC Lat Lon Alt Km Az El Dist Km', - sat3 => 'Syntaxe: SH/SAT [ ]', - sat4 => 'Satellites disponibles/Age des éléments orbitaux (jours):-', - sat5 => 'nnnnn.AMSAT doit figurer dans le sujet pour que des éléments orbitaux puissent être chargés à partir de ce message', - satnf => 'Satellite $_[0] inconnu', - satdisc => '-----', - set => '$_[0] activé pour $_[1]', - sethop1 => 'Syntaxe: set/hops ann|spots|route|wwv|wcy ', - sethop2 => '$_[0] hops définis pour $_[1]$_[2] vers $_[3]', - sethop3 => 'Pas de nombre de hops défini vers $_[0]', - showconf => 'Serveur Utilisateurs', - shu => '\"SHU\" ne suffit pas. Vous devez taper au moins \"SHUT\" pour arrêter le serveur !', - shutting => '$main::mycall en cours d\'arrêt...', - sloc => 'Latitude du serveur $_[0], longitude $_[1]. N\'OUBLIEZ PAS D\'ADAPTER VOTRE DXVars.pm', - snode1 => 'Serveur Type Version', - snode2 => '$_[0] $_[1] $_[2]', - snode3 => '$_[0] Indicatif inconnu', - sqra => 'QRA Locator du serveur: $_[0]. N\'OUBLIEZ PAS D\'ADAPTER VOTRE DXVars.pm', - sorry => 'Désolé !', - spf1 => 'spoof: création du nouvel utilisateur $_[0]', - stathf => 'Statistiques des infos DX en ondes courtes, 31 derniers jours :', - stathft => 'Statistiques des infos DX en ondes courtes, 31 derniers jours pour le DXCC $_[0] :', - statvhf => 'Statistiques des infos DX en VHF et au-delà, 31 derniers jours :', - statvhft => 'Statistiques des infos DX en VHF et au-delà, 31 jours derniers pour le DXCC $_[0] :', - statdx => 'Total des infos DX des 31 derniers jours', - sun => 'Emplacement jj/mm/aaaa Lever Coucher', - sun_with_azel => 'Emplacement jj/mm/aaaa Lever Coucher Azim Elev', - susdb1 => 'Syntaxe : indicatif état ville', - susdb2 => 'USDB $_[0] était $_[1], $_[2]', - susdb3 => 'USDB $_[0] est maintenant $_[1], $_[2]', - susdb4 => 'USDB $_[0] supprimé', - suser1 => 'Syntaxe : indicatif nom_de_champ_utilisateur valeur', - suser2 => 'Utilisateur $_[0] non trouvé', - suser3 => 'Champ utilisateur \'$_[0]\' modifié de \'$_[1]\' à \'$_[2]\'', - suser4 => 'Le nom de champ utilisateur \'$_[0]\' n\'existe pas', - time1 => 'Heure locale: $_[0] $_[1] ($_[2])', - time2 => '$_[0] Heure locale (normale): $_[1] (UTC $_[2])', - time3 => '$_[0] $_[1]', - talks => 'Talk activé pour $_[0]', - talku => 'Talk désactivé pour $_[0]', - talkend => 'conversation terminée avec vous', - talkinst => 'Passage en mode conversation (/EX = terminer, / = exécuter une commande)', - talknh => 'désolé, $_[0] n\'est pas connecté en ce moment', - talkprompt => 'Talk ($_[0])>', - talkstart => 'début de conversation avec vous', - unset => '$_[0] désactivé pour $_[1]', - unsethop1 => 'Syntaxe: unset/hops ann|spots|route|wwv|wcy', - unsethop2 => 'Nombre de hops supprimé vers $_[1] pour $_[0]', - user => 'Utilisateur', - userconn => 'Utilisateurs connectés sur', - usernf => '*** Pas d\'enregistrement utilisateur trouvé pour $_[0] ***', - usstates => 'Affichage des états US activé pour $_[0]', - usstateu => 'Affichage des états US désactivé pour $_[0]', - wcy1 => '$_[0] manque ou est une valeur hors limites', - wcy2 => 'Annonce WCY double', - wcy3 => ' Date Heure SFI A K Kprévu R SA GMF Aurora Source', - wcys => 'WCY activé pour $_[0]', - wcyu => 'WCY désactivé pour $_[0]', - wpc16s => 'PC16 provenant de $_[0] autorisés', - wpc16u => 'PC16 provenant de $_[0] refusés', - wpc19s => 'Routage des PC19 pour $_[0] activé', - wpc19u => 'Routage des PC19 pour $_[0] désactivé', - wwv1 => '$_[0] manque ou est une valeur hors limites', - wwv2 => 'Annonce WWV double', - wwv3 => ' Date Heure SFI A K Prévision Source', - wwvs => 'WWV activé pour $_[0]', - wwvu => 'WWV désactivé pour $_[0]', - wxs => 'WX activé pour $_[0]', - wxu => 'WX désactivé pour $_[0]', + addr => q{Adresse fixée à : $_[0]}, + already => q{$_[0] déjà connecté}, + anns => q{Annonces activées pour $_[0]}, + annu => q{Annonces désactivées pour $_[0]}, + annts => q{AnnTalk activé pour $_[0]}, + anntu => q{AnnTalk désactivé pour $_[0]}, + at => q{connecté en ce moment sur}, + badnode1 => q{Le serveur $_[0] est maintenant en rejet}, + badnode2 => q{Le serveur $_[0] n'est maintenant plus en rejet}, + badnode3 => q{Liste des serveurs en rejet :-}, + bbse1 => q{Veuillez entrer l'adresse de votre BBS avec : set/bbs }, + bbs => q{Votre BBS est définie comme étant "$_[0]"}, + beepoff => q{Bips désactivés}, + beepon => q{Bips activés}, + call1 => q{Recherche de l'indicatif via $_[0]:}, + conother => q{Désolé $_[0], vous êtes déjà connecté sur un autre port}, + concluster => q{Désolé $_[0], vous êtes déjà connecté ailleurs au cluster (sur $_[1])}, + conscript => q{Pas de script de connexion "$_[0]" dans $main::root/connect !}, + confail => q{Echec de la connexion avec $_[0] ($_[1])}, + constart => q{Etablissement de la connexion avec $_[0]}, + deluser => q{L'utilisateur $_[0] a été supprimé}, + db1 => q{Cette base de données est hébergée sur $_[0]}, + db2 => q{Désolé, mais la clé: $_[0] est introuvable dans $_[1]}, + db3 => q{Désolé, la base de données $_[0] n'existe pas ici}, + db4 => q{Désolé, la base de données $_[0] sur $_[1] n'est pas en ligne actuellement}, + db5 => q{Accès à la base de données distante sur $_[0] en cours...veuillez patienter !}, + db6 => q{La base de données $_[0] existe déjà; vous devez d'abord la supprimer}, + db7 => q{Base de données $_[0] créée pour le serveur distant $_[1]}, + db8 => q{Base de données $_[0] créée en local}, + db9 => q{Base de données $_[0] supprimée}, + db10 => q{$_[0] enregistrements importés dans $_[1]}, + db11 => q{Envoi de votre requête à $_[0], veuillez patienter...}, + db12 => q{Base de données Serveur Commande Chaînage}, + dfreq1 => q{Fréquence $_[0] non valable. Il faut par exemple: 0/30000 ou hf ou hf/cw'}, + dir1 => q{Aucun message trouvé !}, + disc1 => q{Déconnecté par $_[0]}, + disc2 => q{Canal $_[0] déconnecté}, + disc3 => q{Pas de canal, mais connexion $_[0] terminée}, + disc4 => q{Pas de canal ni de connexion mais "orphelin" $_[0] déconnecté}, + done => q{Terminé.}, + dup => q{Désolé, ceci est un doublon.}, + dx1 => q{La fréquence $_[0] est hors bande (voir show/band); syntaxe: DX [BY indicatif] fréquence indicatif remarques}, + dx2 => q{L'indicatif manque; syntaxe : DX [BY indicatif] fréquence indicatif remarques}, + dx3 => q{Indicatif ou fréquence non valable.}, + dxcqs => q{Zones DX CQ activées pour $_[0]}, + dxcqu => q{Zones DX CQ désactivées pour $_[0]}, + dxitus => q{Zones DX UIT activées pour $_[0]}, + dxituu => q{Zones DX UIT désactivées pour $_[0]}, + dxs => q{Infos DX activées pour $_[0]}, + dxu => q{Infos DX désactivées pour $_[0]}, + e1 => q{Commande inconnue}, + e2 => q{Erreur: $_[0]}, + e3 => q{$_[0]: $_[1] non trouvé}, + e4 => q{Il faut au moins un préfixe ou un indicatif}, + e5 => q{Non autorisé.}, + e6 => q{*** Aucune station spécifiée ***}, + e7 => q{$_[0] n'est pas atteignable sur le cluster}, + e8 => q{Il faut un indicatif et du texte.}, + e9 => q{Il faut un texte.}, + e10 => q{$_[0] n'est pas connecté localement}, + e11 => q{Le destinataire ne peut pas être $main:mycall}, + e12 => q{Il faut spécifier un indicatif de serveur !}, + e13 => q{$_[0] n'est pas un serveur}, + e14 => q{Le premier argument doit être une valeur numérique > 0}, + e15 => q{Paramètre incorrect : "$_[0]"}, + e16 => q{Le fichier "$_[0]" existe déjà}, + e17 => q{Prière de ne pas utiliser les mots : @_ ici !'}, + e18 => q{Connexion impossible avec $_[0] ($!)}, + e19 => q{Caractère non valide dans la ligne $_[0]}, + e20 => q{Symbole $_[0] non reconnu}, + e21 => q{$_[0] n'est pas une valeur numérique}, + e22 => q{$_[0] n'est pas un indicatif}, + e23 => q{$_[0] n'est pas un intervalle (exemple: 0/30000)'}, + e24 => q{Désolé, l'accès à Internet n'est pas actif}, + e25 => q{Désolé, la valeur doit être entre $_[0] et $_[1]}, + e26 => q{Trop d'erreurs simultanées; vous allez être déconnecté !}, + e27 => q{$_[0] n'est un préfixe ni sa valeur numérique.'}, + e28 => q{Désolé, vous devez d'abord vous enregistrer (SP $main::myalias pour ce faire)}, + e29 => q{Il faut un mot de passe !}, + e30 => q{Impossible d'ouvrir $_[0] $!}, + e31 => q{$_[0] n'est pas un utilisateur'}, + e32 => q{Il faut une phrase secrète !}, + e33 => q{$_[0] n'est pas un nombre de jours ou une date valable}, + e34 => q{Il faut un GROUPE puis du texte}, + e35 => q{Vous n'êtes pas un membre de $_[0], rejoignez $_[0]}, + + echoon => q{Echo activé}, + echooff => q{Echo désactivé}, + echow => q{L'écho est actuellement désactivé (set/echo pour l'activer)}, + emaile1 => q{Veuillez entrer votre adresse e-mail avec : set/email }, + emaila => q{Votre adresse e-mail est enregistrée comme étant "$_[0]"}, + email => q{Adresse e-mail définie comme étant $_[0]}, + export1 => q{Syntaxe: export }, + export2 => q{$_[3] rencontre une erreur à l'exportation du message $_[0] vers $_[1] ($_[2])}, + export3 => q{$_[2 ] a exporté le message $_[0] vers $_[1]}, + filter1 => q{Filtre $_[0] mis à jour dans $_[1]}, + filter2 => q{Mot clé de filtrage inconnu : $_[0]}, + filter3 => q{Pas de filtres définis pour $_[0]}, + filter4 => q{$_[0]$_[1] Filtre $_[2] supprimé pour $_[3]}, + filter5 => q{Il faut une commande de filtrage...}, + filter6 => q{$_[0]$_[1] Filtre pour $[2] introuvable}, + grids => q{Fonction DX Grid activée pour $_[0]}, + gridu => q{Fonction DX Grid désactivée pour $_[0]}, + illcall => q{Désolé, $_[0] n'est pas un indicatif valable}, + hasha => q{$_[0] existe déjà dans $_[1]}, + hashb => q{$_[0] ajouté à $_[1]}, + hashc => q{$_[0] retiré de $_[1]}, + hashd => q{$_[0] n'est pas dans $_[1]'}, + hashe => q{$_[0] ajouté le $_[1]'}, + heading => q{Azimut}, + helpe1 => q{Système d'aide non disponible, prière de prévenir le sysop}, + helpe2 => q{Pas d'aide disponible sur $_[0]}, + heres => q{$_[0] est présent}, + heade1 => q{Calcul avec les coordonnées de $main::mycall; pensez à faire un set/location ou set/qra !}, + hereu => q{$_[0] est absent}, + homebbs => q{BBS usuelle définie comme étant $_[0]}, + homenode => q{Serveur cluster usuel défini comme étant $_[0]}, + homenode2 => q{Utilise}, + hnodee1 => q{Veuillez entrer votre serveur cluster usuel (set/homenode )}, + hnodee2 => q{Impossible de définir votre serveur usuel comme étant $_[0]}, + hnode => q{Votre serveur cluster usuel est défini comme étant "$_[0]"}, + init1 => q{Message d'initialisation envoyé à $_[0]}, + iso => q{$_[0] isolé}, + isou => q{$_[0] n'est plus isolé}, + isoc => q{$_[0] créé et isolé}, + isoari => q{Il existe un filtre de route entrante pour $_[0]; utilisez d'abord clear/route $_[0]}, + isoaro => q{Il existe un filtre de route sortante pour $_[0]; utilisez d'abord clear/route $_[0]}, + isow => q{$_[0] est isolé; utilisez d'abord unset/isolate $_[0]}, + join => q{Affiliation au groupe $_[0]}, + l1 => q{Désolé $_[0], vous êtes déjà connecté sur un autre canal}, + l2 => q{Bonjour $_[0], bienvenue sur $main::mycall à $main::myqth\nServeur DXSpider V$main::version ($main::build)}, + lang => q{Je parle maintenant français}, + lange1 => q{Syntaxe : set/language , où est à choisir parmi ($_[0])}, + lange2 => q{Impossible de fixer la langue à $_[0]'}, + lastconn => q{Dernière conn}, + leave => q{Départ du groupe $_[0]}, + lh1 => q{$main::data/hop_table.pl n'existe pas}, + local1 => q{Local}, + loce1 => q{Veuillez entrer vos coordonnées avec : set/location }, + loce2 => q{"$_[0]" n'est visiblement pas une latitude/longitude (ex: 46 20 N 6 12 E)}, + loce3 => q{$_[0] est un QTH locator, veuillez utiliser : set/qra $_[0]}, + loc => q{Votre latitude/longitude est enregistrée comme étant "$_[0]"}, + location => q{Coordonnées}, + lockout => q{$_[0] exclus}, + lockoutc => q{$_[0] créé et exclus}, + lockoutun => q{$_[0] n'est plus exclus}, + lockoutuse => q{Syntaxe : sh/lockout |ALL}, + loginu => q{L'utilisateur $_[0] s'est connecté}, + logoutu => q{L'utilisateur $_[0] s'est déconnecté}, + loginn => q{Le serveur $_[0] s'est connecté}, + logoutn => q{Le serveur $_[0] s'est déconnecté}, + m1 => q{Veuillez entrer le sujet (max. 30 caractères):}, + m2 => q{Copie du message $_[0] envoyée à $_[1]}, + m3 => q{Désolé, $_[0] n'est pas une adresse de destination acceptable}, + m4 => q{Désolé, impossible d'accéder au message $_[0]}, + m5 => q{Il faut spécifier un numéro de message !'}, + m6 => q{Réponse à : $_[0]}, + m7 => q{Sujet : $_[0]}, + m8 => q{Entrez maintenant le texte (fin avec ou /EX, abandon avec /ABORT)}, + m9 => q{Vous avez du nouveau courrier (tapez R pour le lire)}, + m10 => q{Entrée du message abandonnée}, + m11 => q{Message numéro $_[0] enregistré et transmis à $_[1]}, + m12 => q{Message numéro $_[0] supprimé}, + m13 => q{Message numéro $_[0] introuvable}, + m14 => q{Message numéro $_[0] marqué comme envoyé à $_[1]}, + m15 => q{Message numéro $_[0] marqué comme non envoyé à $_[1]}, + m16 => q{Il faut un numéro de message !}, + m17 => q{Désolé, impossible d'envoyer des messages en mode $_[0]}, + m18 => q{Désolé, le message $_[0] possède actuellement le statut KEEP}, + msg1 => q{Bulletins mis en file d'attente}, + msg2 => q{Messages personnels mis en file d'attente}, + msg3 => q{Message $_[0]: $_[1] changé de $_[2] en $_[3]}, + msgu => q{Syntaxe: msg données...}, + merge1 => q{Demande de fusionnement de $_[1] infos DX et $_[2] WWV envoyée à $_[0]}, + moon => q{Emplacement jj/mm/aaaa Lever Coucher}, + moon_with_azel => q{Emplacement jj/mm/aaaa Lever Coucher Azim Elev}, + mond => q{Monitoring désactivé}, + mone => q{Monitoring activé}, + name1 => q{Nom}, + namee1 => q{Veuillez entrer votre nom avec : set/name }, + namee2 => q{Utilisateur $_[0] introuvable.}, + name => q{Votre nom est enregistré comme étant "$_[0]"}, + nodea => q{$_[0] défini comme serveur de type AK1A}, + nodeac => q{$_[0] créé comme serveur de type AK1A}, + nodeb => q{$_[0] défini comme BBS}, + nodebc => q{$_[0] créé comme BBS}, + nodec => q{$_[0] défini comme serveur de type CLX}, + nodecc => q{$_[0] créé comme serveur de type CLX}, + noder => q{$_[0] défini comme serveur de type AR-Cluster}, + noderc => q{$_[0] créé comme serveur de type AR-Cluster}, + nodes => q{$_[0] défini comme serveur de type DXSpider}, + nodesc => q{$_[0] créé comme serveur de type DXSpider}, + nodex => q{$_[0] défini comme serveur de type DXNET}, + nodexc => q{$_[0] créé comme serveur de type DXNET}, + nodeu => q{$_[0] défini comme utilisateur}, + nodee1 => q{Vous ne pouvez pas utiliser cette commande pendant que sa cible ($_[0]) est en ligne}, + notdone => q{PAS fait}, + nothere => q{désolé, $_[0] n'est pas là en ce moment...'}, + obscount => q{Compteur d'obsolescence des pings vers $_[0] mis à $_[1]}, + ok => q{Opération réussie}, + outconn => q{Connexion en cours avec $_[0]}, + page => q{ pour continuer ou pour arrêter (il reste $_[0] lignes) >}, + pagelth => q{Longueur de page fixée à $_[0]}, + passerr => q{Veuillez utiliser: SET/PASS }, + passphrase => q{Phrase secrète définie ou modifiée pour $_[0]}, + passphraseu => q{Phrase secrète supprimée pour $_[0]}, + password => q{Mot de passe défini ou modifié pour $_[0]}, + passwordu => q{Mot de passe supprimé pour $_[0]}, + pc90s => q{PC90 activé pour $_[0]}, + pc90u => q{PC90 désactivé pour $_[0]}, + pingo => q{Ping envoyé vers $_[0]}, + pingi => q{Ping retourné par $_[0] en $_[1] (moyenne $_[2]) secondes}, + pinge1 => q{Vous ne pouvez pas vous pinger vous-même !}, + pingint => q{Intervalle de ping vers $_[0] fixé à $_[1] secondes}, + 'pos' => q{Indicatif source : latitude $_[0] : longitude $_[1] : $_[2]}, + prs => q{Prompt défini comme étant "$_[0]"}, + pru => q{Prompt remis à sa valeur par défaut}, + priv => q{Niveau de privilège changé en $_[0]}, + prx => q{$main::mycall >}, + pw0 => q{Entrez l'ancien mot de passe : }, + pw1 => q{Entrez le nouveau mot de passe : }, + pw2 => q{Confirmez le nouveau mot de passe : }, + pw3 => q{Mot de passe modifié}, + pw4 => q{Les mots de passe sont différents, changement PAS effectué}, + qll => q{Veuillez entrer votre emplacement avec set/location ou set/qra}, + qthe1 => q{Veuillez entrer votre QTH, set/qth }, + qth => q{Votre QTH est enregistré comme étant "$_[0]"}, + qrae1 => q{Veuillez entrer votre QRA locator, set/qra (exemple : set/qra JN36BE)}, + qrashe1 => q{Veuillez entrer un QRA locator, par exemple: sh/qra JN36BE or sh/qra JN36BE JO31NS}, + qrae2 => q{"$_[0]" n'est pas un QRA locator (exemple: JN36BE)}, + qra => q{Votre QRA Locator est enregistré comme étant "$_[0]"}, + qsl1 => q{Indicatif Manager Fois Dernière annonce Par}, + rcmdo => q{RCMD "$_[0]" envoyé à $_[1]}, + read1 => q{Désolé, pas de nouveaux messages pour vous.}, + read2 => q{Message $_[0] introuvable}, + read3 => q{Message $_[0] non disponible}, + rec => q{$_[0] enregistrements}, + reg => q{$_[0] enregistré}, + regc => q{$_[0] créé et enregistré}, + reginac => q{Le mode Enregistré n'est pas actif (set/var \$main::reqreg = 1 pour l'activer)}, + regun => q{Enregistrement de $_[0] supprimé}, + route => q{$_[0] sur $_[1] via $_[2]}, + sat1 => q{Table de poursuite pour $_[0] pour les prochaines $_[1] heures toutes les $_[2] minutes}, + sat2 => q{jj/mm UTC Lat Lon Alt Km Az El Dist Km}, + sat3 => q{Syntaxe: SH/SAT [ ]}, + sat4 => q{Satellites disponibles/Age des éléments orbitaux (jours):-}, + sat5 => q{nnnnn.AMSAT doit figurer dans le sujet pour que des éléments orbitaux puissent être chargés à partir de ce message}, + satnf => q{Satellite $_[0] inconnu}, + satdisc => q{-----}, + set => q{$_[0] activé pour $_[1]}, + sethop1 => q{Syntaxe: set/hops ann|spots|route|wwv|wcy }, + sethop2 => q{$_[0] hops définis pour $_[1]$_[2] vers $_[3]'}, + sethop3 => q{Pas de nombre de hops défini vers $_[0]'}, + showconf => q{Serveur Utilisateurs}, + shu => q{"SHU" ne suffit pas. Vous devez taper au moins "SHUT" pour arrêter le serveur !}, + shutting => q{$main::mycall en cours d'arrêt...}, + sloc => q{Latitude du serveur $_[0], longitude $_[1]. N'OUBLIEZ PAS D'ADAPTER VOTRE DXVars.pm}, + snode1 => q{Serveur Type Version}, + snode2 => q{$_[0] $_[1] $_[2]}, + snode3 => q{$_[0] Indicatif inconnu}, + sqra => q{QRA Locator du serveur: $_[0]. N'OUBLIEZ PAS D'ADAPTER VOTRE DXVars.pm}, + sorry => q{Désolé !}, + spf1 => q{spoof: création du nouvel utilisateur $_[0]}, + stathf => q{Statistiques des infos DX en ondes courtes, 31 derniers jours :}, + stathft => q{Statistiques des infos DX en ondes courtes, 31 derniers jours pour le DXCC $_[0] :}, + statvhf => q{Statistiques des infos DX en VHF et au-delà, 31 derniers jours :}, + statvhft => q{Statistiques des infos DX en VHF et au-delà, 31 jours derniers pour le DXCC $_[0] :}, + statdx => q{Total des infos DX des 31 derniers jours}, + sun => q{Emplacement jj/mm/aaaa Lever Coucher}, + sun_with_azel => q{Emplacement jj/mm/aaaa Lever Coucher Azim Elev}, + susdb1 => q{Syntaxe : indicatif état ville}, + susdb2 => q{USDB $_[0] était $_[1], $_[2]}, + susdb3 => q{USDB $_[0] est maintenant $_[1], $_[2]}, + susdb4 => q{USDB $_[0] supprimé}, + suser1 => q{Syntaxe : indicatif nom_de_champ_utilisateur valeur}, + suser2 => q{Utilisateur $_[0] non trouvé}, + suser3 => q{Champ utilisateur '$_[0]' modifié de '$_[1]' à '$_[2]'}, + suser4 => q{Le nom de champ utilisateur '$_[0]' n'existe pas}, + time1 => q{Heure locale: $_[0] $_[1] ($_[2])}, + time2 => q{$_[0] Heure locale (normale): $_[1] (UTC $_[2])}, + time3 => q{$_[0] $_[1]}, + talks => q{Talk activé pour $_[0]}, + talku => q{Talk désactivé pour $_[0]}, + talkend => q{conversation terminée avec vous}, + talkinst => q{Passage en mode conversation (/EX = terminer, / = exécuter une commande)}, + talknh => q{désolé, $_[0] n'est pas connecté en ce moment}, + talkprompt => q{Talk ($_[0])>}, + talkstart => q{début de conversation avec vous}, + unset => q{$_[0] désactivé pour $_[1]}, + unsethop1 => q{Syntaxe: unset/hops ann|spots|route|wwv|wcy}, + unsethop2 => q{Nombre de hops supprimé vers $_[1] pour $_[0]'}, + user => q{Utilisateur}, + userconn => q{Utilisateurs connectés sur}, + usernf => q{*** Pas d'enregistrement utilisateur trouvé pour $_[0] ***}, + usstates => q{Affichage des états US activé pour $_[0]}, + usstateu => q{Affichage des états US désactivé pour $_[0]}, + wcy1 => q{$_[0] manque ou est une valeur hors limites}, + wcy2 => q{Annonce WCY double}, + wcy3 => q{ Date Heure SFI A K Kprévu R SA GMF Aurora Source}, + wcys => q{WCY activé pour $_[0]}, + wcyu => q{WCY désactivé pour $_[0]}, + wpc16s => q{PC16 provenant de $_[0] autorisés}, + wpc16u => q{PC16 provenant de $_[0] refusés}, + wpc19s => q{Routage des PC19 pour $_[0] activé}, + wpc19u => q{Routage des PC19 pour $_[0] désactivé}, + wwv1 => q{$_[0] manque ou est une valeur hors limites}, + wwv2 => q{Annonce WWV double}, + wwv3 => q{ Date Heure SFI A K Prévision Source}, + wwvs => q{WWV activé pour $_[0]}, + wwvu => q{WWV désactivé pour $_[0]}, + wxs => q{WX activé pour $_[0]}, + wxu => q{WX désactivé pour $_[0]}, }, es => { - addr => 'La dirección es ahora: $_[0]', - already => '$_[0] ya está conectado', - anns => 'Activada la recepción de anuncios para $_[0]', - annu => 'Desactivada la recepción de anuncios para $_[0]', - annts => 'Modo AnnTalk activado para $_[0]', - anntu => 'Modo AnnTalk desactivado para $_[0]', - at => 'at', - badnode1 => 'No se aceptan spots con origen en $_[0], se añade a la lista badnode', - badnode2 => 'Se aceptan spots del nodo $_[0], sale de la lista badnode', - badnode3 => 'Lista de nodos rechazados:', - bbse1 => 'Por favor introduce tu BBS, set/bbs ', - bbs => 'Tu BBS es ahora \"$_[0]\"', - beepoff => 'Avisos sonoros desactivados', - beepon => 'Avisos sonoros activados', - believes => 'Creo en el nodo $_[0] via $_[1]', - believeu => 'No creo en el nodo $_[0] via $_[1]', - buddya => '$_[0] se añade a tu lista de indicativos amigos', - buddyu => '$_[0] se elimina de tu lista de indicativos amigos', - call1 => 'Se encontró el indicativo vía $_[0]:', - chatend => 'Finalizado el modo chat en el canal $_[0]', - chatinst => 'Entrando en modo Chat en el canal $_[0], /EX para salir, / para ejecutar un comando', - chatprompt => 'Chat ($_[0])>', - chattoomany => 'Operación no permitida, actualmente estas en el canal $_[1], usa /chat $_[0]', - conother => 'Lo siento $_[0] ya estás conectado en otro puerto', - concluster => 'Lo siento $_[0] ya estás conectado en otro cluster', - conscript => 'No hay ningún script que se llame \"$_[0]\" en $main::root/connect', - confail => 'La conexión con $_[0] ha fallado ($_[1])', - constart => 'Se inicia la conexión a $_[0]', - conbump => 'Reconectado como $_[0] en $_[1], Esta sesión termina y se te desconecta', + addr => q{La dirección es ahora: $_[0]}, + already => q{$_[0] ya está conectado}, + anns => q{Activada la recepción de anuncios para $_[0]}, + annu => q{Desactivada la recepción de anuncios para $_[0]}, + annts => q{Modo AnnTalk activado para $_[0]}, + anntu => q{Modo AnnTalk desactivado para $_[0]}, + at => q{at}, + badnode1 => q{No se aceptan spots con origen en $_[0], se añade a la lista badnode}, + badnode2 => q{Se aceptan spots del nodo $_[0], sale de la lista badnode}, + badnode3 => q{Lista de nodos rechazados:}, + bbse1 => q{Por favor introduce tu BBS, set/bbs }, + bbs => q{Tu BBS es ahora "$_[0]"}, + beepoff => q{Avisos sonoros desactivados}, + beepon => q{Avisos sonoros activados}, + believes => q{Creo en el nodo $_[0] via $_[1]}, + believeu => q{No creo en el nodo $_[0] via $_[1]}, + buddya => q{$_[0] se añade a tu lista de indicativos amigos}, + buddyu => q{$_[0] se elimina de tu lista de indicativos amigos}, + call1 => q{Se encontró el indicativo vía $_[0]:}, + chatend => q{Finalizado el modo chat en el canal $_[0]}, + chatinst => q{Entrando en modo Chat en el canal $_[0], /EX para salir, / para ejecutar un comando}, + chatprompt => q{Chat ($_[0])>}, + chattoomany => q{Operación no permitida, actualmente estas en el canal $_[1], usa /chat $_[0]}, + conother => q{Lo siento $_[0] ya estás conectado en otro puerto}, + concluster => q{Lo siento $_[0] ya estás conectado en otro cluster}, + conscript => q{No hay ningún script que se llame "$_[0]" en $main::root/connect}, + confail => q{La conexión con $_[0] ha fallado ($_[1])}, + constart => q{Se inicia la conexión a $_[0]}, + conbump => q{Reconectado como $_[0] en $_[1], Esta sesión termina y se te desconecta}, deluser =>'El usuario $_[0] ha sido borrado de la base de datos', - db1 => 'Esta base de datos está en $_[0]', - db2 => 'Lo siento, pero no se encontró $_[0] en $_[1]', - db3 => 'Lo siento, la base de datos $_[0] no existe aquí', - db4 => 'Lo siento, la base de datos $_[0] situada en $_[1] no se encuentra disponible', - db5 => 'Accediendo a la base de datos remota $_[0]...espere...', - db6 => 'La base de datos $_[0] ya existe, bórrala primero', - db7 => 'La base de datos $_[0] creada para el nodo remoto $_[1]', - db8 => 'Base de datos $_[0] creada localmente', - db9 => 'La base de datos $_[0] ha sido eliminada', - db10 => '$_[0] registros importados para la base de datos $_[1]', - db11 => 'Tu petición ha sido enviada a $_[0], por favor espera...', - dfreq1 => 'La frecuencia no es válida $_[0] ej: 0/30000 o hf o hf/cw', - dir1 => 'No hay mensajes nuevos', - disc1 => '.', - disc2 => 'Canal $_[0] desconectado', - disc3 => 'No estaba activo el canal, pero la conexión de $_[0] ha sido eliminada', - disc4 => 'No existía el canal o la conexión, $_[0] se elimina', - done => 'Comando ejecutado con éxito.', - dup => 'Lo siento, esto es un duplicado', - dx1 => 'Frecuencia $_[0] fuera de banda (ver show/band); usa: DX [BY indicativo] frec indic. comentario', - dx2 => 'Necesita indicativo; usa: DX [BY indicativo] frec indic. comentario', - dx3 => 'El indicativo o la frecuencia es incorrecta', - dxcqs => 'Activada la recepción de Zonas CQ en spots de DX para $_[0]', - dxcqu => 'Desactivada la recepción de Zonas CQ en spots de DX para $_[0]', - dxitus => 'Activada la recepción de Zonas ITU en spots de DX para $_[0]', - dxituu => 'Desactivada la recepción de Zonas ITU en spots de DX para $_[0]', - dxs => 'Activada la recepción de spots de DX para $_[0]', - dxu => 'Desactivada la recepción de spots de DX para $_[0]', - e1 => 'Este comando no es válido', - e2 => 'Error: $_[0]', - e3 => '$_[0]: $_[1] no encontrado', - e4 => 'Se necesita, por lo menos, un prefijo o indicativo', - e5 => 'No estás autorizado', - e6 => '*** No se ha especificado una estación ***', - e7 => '$_[0] no está visible en la red actualmente', - e8 => 'Se necesita un indicativo y algún texto', - e9 => 'Se necesita al menos algún texto', - e10 => '$_[0] no se encuentra conectado', - e11 => 'No puedes usar tu propio $main:mycall como destino', - e12 => 'Se necesita el indicativo del nodo', - e13 => '$_[0] no es un nodo', - e14 => 'El primer argumento debe de ser numérico y > 0', - e15 => 'calificador no válido \"$_[0]\"', - e16 => 'El fichero \"$_[0]\" ya existe', - e17 => 'Por favor no uses la palabra: @_ aquí', - e18 => 'No se puede conectar con $_[0] ($!)', - e19 => 'Carácter no válido en la línea $_[0]', - e20 => 'Símbolo $_[0] no reconocido', - e21 => '$_[0] no es numérico', - e22 => '$_[0] no es un indicativo', - e23 => '$_[0] fuera de rango (ej: 0/30000)', - e24 => 'Lo siento, el acceso a internet no está habilitado', - e25 => 'Lo siento el valor debe de estar entre $_[0] y $_[1]', - e26 => 'Demasiados errores, serás desconectado', - e27 => '$_[0] no es un número o un prefijo', - e28 => 'Lo siento, necesitas registrarte (SP $main::myalias para registrarte)', - e29 => 'Necesitas password', - e30 => 'No se puede abrir $_[0] $!', - e31 => '$_[0] no es un usuario', - e32 => 'Se necesita una frase de contraseña', - e33 => '$_[0] No es un número de días o una fecha válida', - e34 => 'Se necesita un grupo y algún texto', - e35 => 'No eres un miembro del grupo $_[0], usa join $_[0] para entrar en este grupo', - e36 => 'Solo puedes hacer esto desde el prompt de usuario', - - echoon => 'Eco local activado', - echooff => 'Eco local desactivado', - echow => '*Eco local desactivado, set/echo para activarlo', - emaile1 => 'Por favor introduce tu E-mail, set/email ', - emaila => 'Tu dirección E-mail es ahora \"$_[0]\"', - email => 'La dirección E-mail es ahora: $_[0]', - export1 => 'uso: export ', - export2 => '$_[3] hubo un error exportando mensaje $_[0] a $_[1] ($_[2])', - export3 => '$_[2 ] exportando mensaje $_[0] a $_[1]', - filter1 => 'Filtro $_[0] actualizado con el nombre $_[1]', - filter2 => 'Es necesario un valor para $_[0]', - filter3 => 'No hay filtros definidos para $_[0]', - filter4 => 'Filtro número $_[2] del tipo: $_[0]$_[1] borrado para $_[3]', - filter5 => 'Se necesitan algunos comandos para el filtro...', - filter6 => '$_[0]$_[1] Filtro para $[2] no encontrado', - grids => 'Activada recepción de locators en spot (DX Grid) para $_[0]', - gridu => 'Desactivada recepción de locators en spot (DX Grid) para $_[0]', - gtks => 'Terminal GTK activado para $_[0]', - gtku => 'Terminal GTK desactivado para $_[0]', - illcall => 'Lo siento, $_[0] no es un indicativo válido', - hasha => '$_[0] ya existe en $_[1]', - hashb => '$_[0] añadido a $_[1]', - hashc => '$_[0] eliminado de $_[1]', - hashd => '$_[0] no se encuentra en $_[1]', - hashe => '$_[0] activado $_[1]', - heading => 'Rumbo', - helpe1 => 'La ayuda no está disponible, comunícaselo al sysop', - helpe2 => 'No hay ayuda disponible para $_[0]', - heres => 'Se informa a la red: $_[0] está presente', - heade1 => 'Usando las coord. de $main::mycall, se recomienda usar set/location o set/qra', - hereu => 'Se informa a la red: $_[0] está ausente', - homebbs => 'Tu BBS es ahora: $_[0]', - homenode => 'Tu cluster habitual es ahora: $_[0]', - hnodee1 => 'Por favor introduce tu cluster habitual, set/homenode ', - hnodee2 => 'Error al definir homenode en $_[0]', - hnode => 'Tu nodo habitual es ahora \"$_[0]\"', - init1 => 'Enviado mensaje de inicialización a $_[0]', - iso => 'El cluster $_[0] se pone en modo pasivo (Aislado)', - isou => 'El cluster $_[0] se pone en modo activo', - isoc => '$_[0] creado y definido como pasivo (Aislado)', - isoari => 'Existe un filtro de rutas "input" para $_[0]; clear/route input $_[0] primero', - isoaro => 'Existe un filtro de rutas para $_[0]; clear/route $_[0] primero', - isow => '$_[0] está en modo aislado; unset/isolate $_[0] primero', - join => 'Entras en el grupo $_[0]', - l1 => 'Lo siento $_[0], ya estás conectado en otro canal', - l2 => 'Hola $_[0], esta es $main::mycall en $main::myqth usando DXSpider V$main::version', - lang => 'El idioma seleccionado es el Español', - lange1 => 'set/language donde es uno entre ($_[0])', - lange2 => 'Error al seleccionar idioma en $_[0]', - lastconn => 'Última conexión', - leave => 'Abandonas el grupo $_[0]', - lh1 => '$main::data/hop_table.pl no existe', - local1 => 'Local', - loce1 => 'Por favor introduce tu posición, set/location ', - loce2 => 'No se reconoce \"$_[0]\" como una Lat/Long (ej: 52 20 N 0 16E)', - loce3 => '$_[0] es un QRA locator, por favor usa: set/qra $_[0]', - loc => 'Tu Lat/Long es ahora \"$_[0]\"', - location => 'Location', - lockout => '$_[0] Excluido del sistema', - lockoutc => '$_[0] Creado y excluido del sistema', - lockoutun => '$_[0] Autorizado para conectar', - lockoutuse => 'Uso: sh/lockout |ALL', - loginb => 'El colega $_[0] ha conectado', - loginbn => 'El colega $_[0] ha conectado en $_[1]', - logoutb => 'El colega $_[0] se ha desconectado', - logoutbn => 'El colega $_[0] se ha desconectado de $_[1]', - loginu => '$_[0] conecta', - logoutu => '$_[0] se desconecta', - loginn => '$_[0] conecta', - logoutn => '$_[0] se desconecta', - m1 => 'Introduce el título (máx. 30 caractéres):', - m2 => 'Copia del mensaje $_[0] enviada a $_[1]', - m3 => 'Lo siento, $_[0] no se aceptan mensajes a ese tópico', - m4 => 'Lo siento, no se puede acceder al mensaje $_[0]', - m5 => 'Lo siento, se necesita un número de mensaje', - m6 => 'Reenviado a: $_[0]', - m7 => 'Título : $_[0]', - m8 => 'Introduce mensaje. /EX para terminar o /ABORT para interrumpir', - m9 => 'Hay correo nuevo para ti. Bórralo una vez leído.', - m10 => 'Mensaje interrumpido', - m11 => 'Mensaje nr $_[0] guardado y enviado a $_[1]', - m12 => 'Mensaje nr $_[0] borrado', - m13 => 'Mensaje nr $_[0] no encontrado', - m14 => 'Mensaje nr $_[0] marcado para ser enviado a $_[1]', - m15 => 'El mensaje nr $_[0] no se enviará a $_[1]', - m16 => 'Se necesita un número de mensaje', - m17 => 'Lo siento, no puedo enviar el mensaje en $_[0] modo', - m18 => 'Lo siento, el mensaje $_[0] está actualmente marcado como KEEP (Guardarlo)', - m19 => 'Fichero de inicio de conexión de $_[0] guardado, contiene $_[1] línea(s)', - m20 => 'Fichero de inicio de conexión vacio de $_[0] borrado', - msg1 => 'Cola de mensajes tipo Boletín', - msg2 => 'Cola de mensajes tipo Privados', - msg3 => 'Msg $_[0]: $_[1] cambiado de $_[2] a $_[3]', - msgu => 'Uso: msg data...', - merge1 => 'Petición de envío de $_[1] spots y $_[2] WWV enviada a $_[0]', - moon => 'QTH dd/mm/yyyy Salida Puesta', - moon_with_azel => 'QTH dd/mm/yyyy Salida Puesta Azim Elev', - mond => 'Activado modo monitor', - mone => 'Desactivado modo monitor', - name1 => 'Nombre', - namee1 => 'Por favor, introduce tu nombre con set/name ', - namee2 => 'No se encuentra el usuario $_[0]!', - name => 'Tu nombre es \"$_[0]\"', - nodea => '$_[0] definido como nodo AK1A ', - nodeac => '$_[0] creado como nodo AK1A ', - nodeb => '$_[0] definido como BBS', - nodebc => '$_[0] creado como BBS', - nodec => '$_[0] definido como nodo CLX ', - nodecc => '$_[0] creado como nodo CLX ', - noder => '$_[0] definido como nodo AR-Cluster ', - noderc => '$_[0] creado como nodo AR-Cluster ', - nodes => '$_[0] definido como nodo DXSpider ', - nodesc => '$_[0] creado como nodo DXSpider ', - nodex => '$_[0] definido como nodo DXNET ', - nodexc => '$_[0] creado como nodo DXNET ', - nodeu => '$_[0] es ahora un usuario', - nodee1 => 'No puedes usar este comando mientras $_[0] se encuentre conectado', - notdone => 'No se ha podido realizar la operación', - nothere => 'Lo siento, pero $_[0] no está aquí ahora, inténtalo mas tarde', - obscount => 'El parámetro Ping obsolescence count para $_[0] se ajusta a $_[1]', - ok => 'Operación realizada', - outconn => 'Iniciando conexión con $_[0]', - page => 'Teclea Enter para continuar, A para abortar (Quedan $_[0] líneas) >', - pagelth => 'La longitud de las páginas es ahora de $_[0] línea(s)', - passerr => 'Por favor usa: SET/PASS ', - passphrase => 'Passphrase definida o cambiada para $_[0]', - passphraseu => 'Passphrase borrada para $_[0]', - password => 'El Password ha sido definido o cambiado para $_[0]', - passwordu => 'Contraseña borrada para $_[0]', - pc90s => 'PC90 activado para $_[0]', - pc90u => 'PC90 desactivado para $_[0]', - pingo => 'Iniciado el ping a $_[0]', - pingi => 'Ping devuelto por $_[0] en $_[1] (Ave $_[2]) segundos', - pinge1 => 'No puedes enviarte un ping a ti mismo!', - pingint => 'Intervalo de ping para $_[0] ajustado a $_[1] segundos', - 'pos' => 'Desde el indicativo: $_[0] Lat: $_[1] Long: $_[2]', - prs => 'El Prompt ha sido cambiado', - pru => 'El Prompt vuelve a ser el normal por defecto', - priv => 'Nivel de privilegios modificado para $_[0]', - prx => '$main::mycall >', - pw0 => 'Escribe el password antiguo: ', - pw1 => 'Escribe el nuevo password: ', - pw2 => 'Confirma el nuevo password: ', - pw3 => 'El Password ha sido cambiado', - pw4 => 'Los passwords no coinciden, NO se han cambiado', - qll => 'Por favor introduce tu locator con set/location o set/qra', - qthe1 => 'Por favor introduce tu QTH, set/qth ', - qth => 'Tu QTH es ahora \"$_[0]\"', - qrae1 => 'Por favor introduce tu QRA locator, set/qra (ej: set/qra JO02LQ)', - qrashe1 => 'Por favor introduce un QRA locator, ej sh/qra JO02LQ o sh/qra JO02LQ IO93NS', - qrae2 => 'No se reconoce \"$_[0]\" como un QRA locator ( ej JO02LQ)', - qra => 'Tu QRA Locator es ahora \"$_[0]\"', - qsl1 => 'Indicativo Manager Nº veces Último Spot De', - rcmdo => 'RCMD \"$_[0]\" enviado a $_[1]', - read1 => 'Lo siento, no hay mensajes nuevos para ti', - read2 => 'Mensaje $_[0] no encontrado', - read3 => 'Mensaje $_[0] no disponible', - rec => '$_[0] registro(s)', - reg => '$_[0] registrado', - regc => '$_[0] creado y registrado', - reginac => 'El registro no está activo (set/var \$main::regreq = 1 para activarlo)', - regun => 'El usuario $_[0] no está registrado', - route => '$_[0] en $_[1] vía $_[2]', - sat1 => 'Tabla de seguimiento $_[0] para las próximas $_[1] horas cada $_[2] minutos', - sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km', - sat3 => 'Sintaxis: SH/SAT [ ]', - sat4 => 'Satélites disponibles:', - sat5 => 'Es necesario el título nnnn.AMSAT para actualizar datos keps. desde un mensaje', - satnf => 'Satélite $_[0] desconocido', - satdisc => '-----', - set => '$_[0] habilitado para $_[1]', - sethop1 => 'Uso: set/hops ann|spots|wwv|wcy ', - sethop2 => '$_[0] hops set on $_[1]$_[2] para $_[3]', - sethop3 => 'No hay hops definidos para $_[0]', - showconf => 'Nodo Indicativos', - shu => '\"SHU\" No es suficiente! Es necesario como mínimo escribir \"SHUT\" para apagar el cluster', - shutting => '$main::mycall shutting down...', - sloc => 'Cluster lat $_[0] long $_[1], NO OLVIDES CAMBIAR TU DXVars.pm', - snode1 => 'Nodo Call Sort Versión', - snode2 => '$_[0] $_[1] $_[2]', - snode3 => '$_[0] Indicativo desconocido', - sqra => 'Cluster QRA Locator$_[0], NO OLVIDES CAMBIAR TU DXVars.pm', - sorry => 'Lo siento', - spf1 => 'spoof: creando nuevo usuario $_[0]', - stathf => 'Estadísticas de spots en HF de los últimos $_[1] días desde el $_[0]', - stathft => 'Estadísticas de spots en HF de los últimos $_[2] días desde el $_[1] para DXCC $_[0]', - statvhf => 'VHF + DX Spot Stats, últimos $_[1] días desde el $_[0]', - statvhft => 'VHF + DX Spot Stats, últimos $_[2] días desde el $_[1] para DXCC $_[0]', - statdx => 'Total de Spots de DX en los últimos $_[1] días desde el $_[0]', - storable => 'Por favor, instale el módulo Storable de CPAN', - sun => 'QTH dd/mm/yyyy Salida Puesta', - sun_with_azel => 'QTH dd/mm/yyyy Salida Puesta Azim Elev', - susdb1 => 'Uso: indicativo estado ciudad', - susdb2 => 'USDB $_[0] era $_[1], $_[2]', - susdb3 => 'USDB $_[0] es ahora $_[1], $_[2]', - susdb4 => 'USDB $_[0] borrado', - suser1 => 'Uso: indicativo user_field_name valor', - suser2 => 'Usuario $_[0] no encontrado', - suser3 => 'User field \'$_[0]\' era \'$_[1]\' ahora es \'$_[2]\'', - suser4 => 'User field name \'$_[0]\' no existe', - time1 => 'Horario local: $_[0] $_[1], UTC $_[2]', - time2 => '$_[0] Local (standard) time: $_[1] ($_[2] Horas)', - time3 => '$_[0] $_[1]', - talks => 'Recepción de mensajes Talk activado para $_[0]', - talku => 'Recepción de mensajes Talk desactivado para $_[0]', - talkend => 'Finalizado modo talk contigo', - talkinst => 'Entrando en modo talk, /EX para salir, / para ejecutar un comando', - talknh => 'Lo siento $_[0] no está conectado en este momento', - talkprompt => 'Talk ($_[0])>', - talkstart => 'Iniciando modo talk contigo', - unset => '$_[0] desactivado para $_[1]', - unsethop1 => 'Uso: unset/hops ann|spots|wwv|wcy', - unsethop2 => 'Borrados los hops para $_[1] en $_[0]', - user => 'Usuario', - userconn => 'Indicativos conectados a', - usernf => '*** No se encuentra el registro de usuario de $_[0] ***', - usstates => 'Activada vista del estado USA en spots para $_[0]', - usstateu => 'Desactivada vista del estado USA en spots para $_[0]', - usernf => '*** Registro de usuario $_[0] no encontrado ***', - wcy1 => '$_[0] falta o está fuera de rango', - wcy2 => 'WCY Duplicado', - wcy3 => 'Fecha Hora SFI A K Exp.K R SA GMF Aurora Logger', - wcys => 'Activada recepción de anuncios WCY para $_[0]', - wcyu => 'Desactivada recepción de anuncios WWV para $_[0]', - wpc16s => 'Admitir PC16 de $_[0] activado', - wpc16u => 'Admitir PC16 de $_[0] desactivado', - wpc19s => 'Activada ruta PC19 para $_[0]', - wpc19u => 'Desactivada ruta PC19 para $_[0]', - wpc90s => 'PC90 para $_[0] activado', - wpc90u => 'PC90 para $_[0] descativado', - wwv1 => '$_[0] falta o está fuera de rango', - wwv2 => 'WWV Duplicado', - wwv3 => 'Fecha Hora SFI A K Previsión Logger', - wwvs => 'Activada recepción de anuncios WWV para $_[0]', - wwvu => 'Desactivada recepción de anuncios WWV para $_[0]', - wxs => 'Activada recepción de anuncios WX para $_[0]', - wxu => 'Desactivada recepción de anuncios WX para $_[0]', + + db1 => q{Esta base de datos está en $_[0]}, + db2 => q{Lo siento, pero no se encontró $_[0] en $_[1]}, + db3 => q{Lo siento, la base de datos $_[0] no existe aquí}, + db4 => q{Lo siento, la base de datos $_[0] situada en $_[1] no se encuentra disponible}, + db5 => q{Accediendo a la base de datos remota $_[0]...espere...}, + db6 => q{La base de datos $_[0] ya existe, bórrala primero}, + db7 => q{La base de datos $_[0] creada para el nodo remoto $_[1]}, + db8 => q{Base de datos $_[0] creada localmente}, + db9 => q{La base de datos $_[0] ha sido eliminada}, + db10 => q{$_[0] registros importados para la base de datos $_[1]}, + db11 => q{Tu petición ha sido enviada a $_[0], por favor espera...}, + dfreq1 => q{La frecuencia no es válida $_[0] ej: 0/30000 o hf o hf/cw}, + dir1 => q{No hay mensajes nuevos}, + disc1 => q{.}, + disc2 => q{Canal $_[0] desconectado}, + disc3 => q{No estaba activo el canal, pero la conexión de $_[0] ha sido eliminada}, + disc4 => q{No existía el canal o la conexión, $_[0] se elimina}, + done => q{Comando ejecutado con éxito.}, + dup => q{Lo siento, esto es un duplicado}, + dx1 => q{Frecuencia $_[0] fuera de banda (ver show/band); usa: DX [BY indicativo] frec indic. comentario}, + dx2 => q{Necesita indicativo; usa: DX [BY indicativo] frec indic. comentario}, + dx3 => q{El indicativo o la frecuencia es incorrecta}, + dxcqs => q{Activada la recepción de Zonas CQ en spots de DX para $_[0]}, + dxcqu => q{Desactivada la recepción de Zonas CQ en spots de DX para $_[0]}, + dxitus => q{Activada la recepción de Zonas ITU en spots de DX para $_[0]}, + dxituu => q{Desactivada la recepción de Zonas ITU en spots de DX para $_[0]}, + dxs => q{Activada la recepción de spots de DX para $_[0]}, + dxu => q{Desactivada la recepción de spots de DX para $_[0]}, + e1 => q{Este comando no es válido}, + e2 => q{Error: $_[0]}, + e3 => q{$_[0]: $_[1] no encontrado}, + e4 => q{Se necesita, por lo menos, un prefijo o indicativo}, + e5 => q{No estás autorizado}, + e6 => q{*** No se ha especificado una estación ***}, + e7 => q{$_[0] no está visible en la red actualmente}, + e8 => q{Se necesita un indicativo y algún texto}, + e9 => q{Se necesita al menos algún texto}, + e10 => q{$_[0] no se encuentra conectado}, + e11 => q{No puedes usar tu propio $main:mycall como destino}, + e12 => q{Se necesita el indicativo del nodo}, + e13 => q{$_[0] no es un nodo}, + e14 => q{El primer argumento debe de ser numérico y > 0}, + e15 => q{calificador no válido "$_[0]"}, + e16 => q{El fichero "$_[0]" ya existe}, + e17 => q{Por favor no uses la palabra: @_ aquí}, + e18 => q{No se puede conectar con $_[0] ($!)}, + e19 => q{Carácter no válido en la línea $_[0]}, + e20 => q{Símbolo $_[0] no reconocido}, + e21 => q{$_[0] no es numérico}, + e22 => q{$_[0] no es un indicativo}, + e23 => q{$_[0] fuera de rango (ej: 0/30000)}, + e24 => q{Lo siento, el acceso a internet no está habilitado}, + e25 => q{Lo siento el valor debe de estar entre $_[0] y $_[1]}, + e26 => q{Demasiados errores, serás desconectado}, + e27 => q{$_[0] no es un número o un prefijo}, + e28 => q{Lo siento, necesitas registrarte (SP $main::myalias para registrarte)', }, + e29 => q{Necesitas password'}, + e30 => q{No se puede abrir $_[0] $!}, + e31 => q{$_[0] no es un usuario'}, + e32 => q{Se necesita una frase de contraseña}, + e33 => q{$_[0] No es un número de días o una fecha válida}, + e34 => q{Se necesita un grupo y algún texto}, + e35 => q{No eres un miembro del grupo $_[0], usa join $_[0] para entrar en este grupo}, + e36 => q{Solo puedes hacer esto desde el prompt de usuario}, + + echoon => q{Eco local activado}, + echooff => q{Eco local desactivado}, + echow => q{*Eco local desactivado, set/echo para activarlo}, + emaile1 => q{Por favor introduce tu E-mail, set/email }, + emaila => q{Tu dirección E-mail es ahora "$_[0]"}, + email => q{La dirección E-mail es ahora: $_[0]}, + export1 => q{uso: export }, + export2 => q{$_[3] hubo un error exportando mensaje $_[0] a $_[1] ($_[2])}, + export3 => q{$_[2 ] exportando mensaje $_[0] a $_[1]}, + filter1 => q{Filtro $_[0] actualizado con el nombre $_[1]}, + filter2 => q{Es necesario un valor para $_[0]}, + filter3 => q{No hay filtros definidos para $_[0]}, + filter4 => q{Filtro número $_[2] del tipo: $_[0]$_[1] borrado para $_[3]}, + filter5 => q{Se necesitan algunos comandos para el filtro...}, + filter6 => q{$_[0]$_[1] Filtro para $[2] no encontrado}, + grids => q{Activada recepción de locators en spot (DX Grid) para $_[0]}, + gridu => q{Desactivada recepción de locators en spot (DX Grid) para $_[0]}, + gtks => q{Terminal GTK activado para $_[0]}, + gtku => q{Terminal GTK desactivado para $_[0]}, + illcall => q{Lo siento, $_[0] no es un indicativo válido}, + hasha => q{$_[0] ya existe en $_[1]}, + hashb => q{$_[0] añadido a $_[1]}, + hashc => q{$_[0] eliminado de $_[1]}, + hashd => q{$_[0] no se encuentra en $_[1]}, + hashe => q{$_[0] activado $_[1]}, + heading => q{Rumbo}, + helpe1 => q{La ayuda no está disponible, comunícaselo al sysop}, + helpe2 => q{No hay ayuda disponible para $_[0]}, + heres => q{Se informa a la red: $_[0] está presente}, + heade1 => q{Usando las coord. de $main::mycall, se recomienda usar set/location o set/qra}, + hereu => q{Se informa a la red: $_[0] está ausente}, + homebbs => q{Tu BBS es ahora: $_[0]}, + homenode => q{Tu cluster habitual es ahora: $_[0]}, + hnodee1 => q{Por favor introduce tu cluster habitual, set/homenode }, + hnodee2 => q{Error al definir homenode en $_[0]}, + hnode => q{Tu nodo habitual es ahora "$_[0]"}, + init1 => q{Enviado mensaje de inicialización a $_[0]}, + iso => q{El cluster $_[0] se pone en modo pasivo (Aislado)}, + isou => q{El cluster $_[0] se pone en modo activo}, + isoc => q{$_[0] creado y definido como pasivo (Aislado)}, + isoari => q{Existe un filtro de rutas "input" para $_[0]; clear/route input $_[0] primero}, + isoaro => q{Existe un filtro de rutas para $_[0]; clear/route $_[0] primero', }, + isow => q{$_[0] está en modo aislado; unset/isolate $_[0] primero}, + join => q{Entras en el grupo $_[0]}, + l1 => q{Lo siento $_[0], ya estás conectado en otro canal}, + l2 => q{Hola $_[0], esta es $main::mycall en $main::myqth usando DXSpider V$main::version}, + lang => q{El idioma seleccionado es el Español}, + lange1 => q{set/language donde es uno entre ($_[0])}, + lange2 => q{Error al seleccionar idioma en $_[0]}, + lastconn => q{Última conexión}, + leave => q{Abandonas el grupo $_[0]}, + lh1 => q{$main::data/hop_table.pl no existe}, + local1 => q{Local}, + loce1 => q{Por favor introduce tu posición, set/location }, + loce2 => q{No se reconoce "$_[0]" como una Lat/Long (ej: 52 20 N 0 16E)}, + loce3 => q{$_[0] es un QRA locator, por favor usa: set/qra $_[0]}, + loc => q{Tu Lat/Long es ahora "$_[0]"}, + location => q{Location}, + lockout => q{$_[0] Excluido del sistema}, + lockoutc => q{$_[0] Creado y excluido del sistema}, + lockoutun => q{$_[0] Autorizado para conectar}, + lockoutuse => q{Uso: sh/lockout |ALL}, + loginb => q{El colega $_[0] ha conectado}, + loginbn => q{El colega $_[0] ha conectado en $_[1]}, + logoutb => q{El colega $_[0] se ha desconectado}, + logoutbn => q{El colega $_[0] se ha desconectado de $_[1]}, + loginu => q{$_[0] conecta}, + logoutu => q{$_[0] se desconecta}, + loginn => q{$_[0] conecta}, + logoutn => q{$_[0] se desconecta}, + m1 => q{Introduce el título (máx. 30 caractéres):}, + m2 => q{Copia del mensaje $_[0] enviada a $_[1]}, + m3 => q{Lo siento, $_[0] no se aceptan mensajes a ese tópico}, + m4 => q{Lo siento, no se puede acceder al mensaje $_[0]}, + m5 => q{Lo siento, se necesita un número de mensaje}, + m6 => q{Reenviado a: $_[0]}, + m7 => q{Título : $_[0]}, + m8 => q{Introduce mensaje. /EX para terminar o /ABORT para interrumpir}, + m9 => q{Hay correo nuevo para ti. Bórralo una vez leído.}, + m10 => q{Mensaje interrumpido}, + m11 => q{Mensaje nr $_[0] guardado y enviado a $_[1]}, + m12 => q{Mensaje nr $_[0] borrado}, + m13 => q{Mensaje nr $_[0] no encontrado}, + m14 => q{Mensaje nr $_[0] marcado para ser enviado a $_[1]}, + m15 => q{El mensaje nr $_[0] no se enviará a $_[1]}, + m16 => q{Se necesita un número de mensaje}, + m17 => q{Lo siento, no puedo enviar el mensaje en $_[0] modo}, + m18 => q{Lo siento, el mensaje $_[0] está actualmente marcado como KEEP (Guardarlo)}, + m19 => q{Fichero de inicio de conexión de $_[0] guardado, contiene $_[1] línea(s)}, + m20 => q{Fichero de inicio de conexión vacio de $_[0] borrado}, + msg1 => q{Cola de mensajes tipo Boletín}, + msg2 => q{Cola de mensajes tipo Privados}, + msg3 => q{Msg $_[0]: $_[1] cambiado de $_[2] a $_[3]}, + msgu => q{Uso: msg data...}, + merge1 => q{Petición de envío de $_[1] spots y $_[2] WWV enviada a $_[0]}, + moon => q{QTH dd/mm/yyyy Salida Puesta}, + moon_with_azel => q{QTH dd/mm/yyyy Salida Puesta Azim Elev', }, + mond => q{Activado modo monitor}, + mone => q{Desactivado modo monitor}, + name1 => q{Nombre}, + namee1 => q{Por favor, introduce tu nombre con set/name }, + namee2 => q{No se encuentra el usuario $_[0]!}, + name => q{Tu nombre es "$_[0]"}, + nodea => q{$_[0] definido como nodo AK1A }, + nodeac => q{$_[0] creado como nodo AK1A }, + nodeb => q{$_[0] definido como BBS}, + nodebc => q{$_[0] creado como BBS}, + nodec => q{$_[0] definido como nodo CLX }, + nodecc => q{$_[0] creado como nodo CLX }, + noder => q{$_[0] definido como nodo AR-Cluster }, + noderc => q{$_[0] creado como nodo AR-Cluster }, + nodes => q{$_[0] definido como nodo DXSpider }, + nodesc => q{$_[0] creado como nodo DXSpider }, + nodex => q{$_[0] definido como nodo DXNET }, + nodexc => q{$_[0] creado como nodo DXNET }, + nodeu => q{$_[0] es ahora un usuario}, + nodee1 => q{No puedes usar este comando mientras $_[0] se encuentre conectado}, + notdone => q{No se ha podido realizar la operación}, + nothere => q{Lo siento, pero $_[0] no está aquí ahora, inténtalo mas tarde}, + obscount => q{El parámetro Ping obsolescence count para $_[0] se ajusta a $_[1]}, + ok => q{Operación realizada}, + outconn => q{Iniciando conexión con $_[0]}, + page => q{Teclea Enter para continuar, A para abortar (Quedan $_[0] líneas) >}, + pagelth => q{La longitud de las páginas es ahora de $_[0] línea(s)}, + passerr => q{Por favor usa: SET/PASS }, + passphrase => q{Passphrase definida o cambiada para $_[0]}, + passphraseu => q{Passphrase borrada para $_[0]}, + password => q{El Password ha sido definido o cambiado para $_[0]}, + passwordu => q{Contraseña borrada para $_[0]}, + pc90s => q{PC90 activado para $_[0]}, + pc90u => q{PC90 desactivado para $_[0]}, + pingo => q{Iniciado el ping a $_[0]}, + pingi => q{Ping devuelto por $_[0] en $_[1] (Ave $_[2]) segundos}, + pinge1 => q{No puedes enviarte un ping a ti mismo!}, + pingint => q{Intervalo de ping para $_[0] ajustado a $_[1] segundos}, + 'pos' => q{Desde el indicativo: $_[0] Lat: $_[1] Long: $_[2]}, + prs => q{El Prompt ha sido cambiado}, + pru => q{El Prompt vuelve a ser el normal por defecto}, + priv => q{Nivel de privilegios modificado para $_[0]}, + prx => q{$main::mycall >}, + pw0 => q{Escribe el password antiguo: }, + pw1 => q{Escribe el nuevo password: }, + pw2 => q{Confirma el nuevo password: }, + pw3 => q{El Password ha sido cambiado}, + pw4 => q{Los passwords no coinciden, NO se han cambiado}, + qll => q{Por favor introduce tu locator con set/location o set/qra}, + qthe1 => q{Por favor introduce tu QTH, set/qth }, + qth => q{Tu QTH es ahora "$_[0]"}, + qrae1 => q{Por favor introduce tu QRA locator, set/qra (ej: set/qra JO02LQ)}, + qrashe1 => q{Por favor introduce un QRA locator, ej sh/qra JO02LQ o sh/qra JO02LQ IO93NS}, + qrae2 => q{No se reconoce "$_[0]" como un QRA locator ( ej JO02LQ)}, + qra => q{Tu QRA Locator es ahora "$_[0]"}, + qsl1 => q{Indicativo Manager Nº veces Último Spot De}, + rcmdo => q{RCMD "$_[0]" enviado a $_[1]}, + read1 => q{Lo siento, no hay mensajes nuevos para ti}, + read2 => q{Mensaje $_[0] no encontrado}, + read3 => q{Mensaje $_[0] no disponible}, + rec => q{$_[0] registro(s)}, + reg => q{$_[0] registrado}, + regc => q{$_[0] creado y registrado}, + reginac => q{El registro no está activo (set/var \$main::regreq = 1 para activarlo)}, + regun => q{El usuario $_[0] no está registrado}, + route => q{$_[0] en $_[1] vía $_[2]}, + sat1 => q{Tabla de seguimiento $_[0] para las próximas $_[1] horas cada $_[2] minutos}, + sat2 => q{dd/mm UTC Lat Lon Alt Km Az El Dist Km}, + sat3 => q{Sintaxis: SH/SAT [ ]}, + sat4 => q{Satélites disponibles:}, + sat5 => q{Es necesario el título nnnn.AMSAT para actualizar datos keps. desde un mensaje}, + satnf => q{Satélite $_[0] desconocido}, + satdisc => q{-----}, + set => q{$_[0] habilitado para $_[1]}, + sethop1 => q{Uso: set/hops ann|spots|wwv|wcy }, + sethop2 => q{$_[0] hops set on $_[1]$_[2] para $_[3]}, + sethop3 => q{No hay hops definidos para $_[0]}, + showconf => q{Nodo Indicativos}, + shu => q{"SHU" No es suficiente! Es necesario como mínimo escribir "SHUT" para apagar el cluster}, + shutting => q{$main::mycall shutting down...}, + sloc => q{Cluster lat $_[0] long $_[1], NO OLVIDES CAMBIAR TU DXVars.pm}, + snode1 => q{Nodo Call Sort Versión}, + snode2 => q{$_[0] $_[1] $_[2]}, + snode3 => q{$_[0] Indicativo desconocido}, + sqra => q{Cluster QRA Locator$_[0], NO OLVIDES CAMBIAR TU DXVars.pm}, + sorry => q{Lo siento}, + spf1 => q{spoof: creando nuevo usuario $_[0]}, + stathf => q{Estadísticas de spots en HF de los últimos $_[1] días desde el $_[0]}, + stathft => q{Estadísticas de spots en HF de los últimos $_[2] días desde el $_[1] para DXCC $_[0]}, + statvhf => q{VHF + DX Spot Stats, últimos $_[1] días desde el $_[0]}, + statvhft => q{VHF + DX Spot Stats, últimos $_[2] días desde el $_[1] para DXCC $_[0]}, + statdx => q{Total de Spots de DX en los últimos $_[1] días desde el $_[0]}, + storable => q{Por favor, instale el módulo Storable de CPAN'}, + sun => q{QTH dd/mm/yyyy Salida Puesta}, + sun_with_azel => q{QTH dd/mm/yyyy Salida Puesta Azim Elev}, + susdb1 => q{Uso: indicativo estado ciudad}, + susdb2 => q{USDB $_[0] era $_[1], $_[2]}, + susdb3 => q{USDB $_[0] es ahora $_[1], $_[2]}, + susdb4 => q{USDB $_[0] borrado}, + suser1 => q{Uso: indicativo user_field_name valor}, + suser2 => q{Usuario $_[0] no encontrado}, + suser3 => q{User field '$_[0]' era '$_[1]' ahora es '$_[2]'}, + suser4 => q{User field name '$_[0]' no existe}, + time1 => q{Horario local: $_[0] $_[1], UTC $_[2]}, + time2 => q{$_[0] Local (standard) time: $_[1] ($_[2] Horas)}, + time3 => q{$_[0] $_[1]}, + talks => q{Recepción de mensajes Talk activado para $_[0]}, + talku => q{Recepción de mensajes Talk desactivado para $_[0]}, + talkend => q{Finalizado modo talk contigo}, + talkinst => q{Entrando en modo talk, /EX para salir, / para ejecutar un comando}, + talknh => q{Lo siento $_[0] no está conectado en este momento}, + talkprompt => q{Talk ($_[0])>}, + talkstart => q{Iniciando modo talk contigo}, + unset => q{$_[0] desactivado para $_[1]}, + unsethop1 => q{Uso: unset/hops ann|spots|wwv|wcy}, + unsethop2 => q{Borrados los hops para $_[1] en $_[0]'}, + user => q{Usuario}, + userconn => q{Indicativos conectados a}, + usernf => q{*** No se encuentra el registro de usuario de $_[0] ***}, + usstates => q{Activada vista del estado USA en spots para $_[0]}, + usstateu => q{Desactivada vista del estado USA en spots para $_[0]}, + usernf => q{*** Registro de usuario $_[0] no encontrado ***}, + wcy1 => q{$_[0] falta o está fuera de rango}, + wcy2 => q{WCY Duplicado}, + wcy3 => q{Fecha Hora SFI A K Exp.K R SA GMF Aurora Logger}, + wcys => q{Activada recepción de anuncios WCY para $_[0]}, + wcyu => q{Desactivada recepción de anuncios WWV para $_[0]}, + wpc16s => q{Admitir PC16 de $_[0] activado}, + wpc16u => q{Admitir PC16 de $_[0] desactivado}, + wpc19s => q{Activada ruta PC19 para $_[0]}, + wpc19u => q{Desactivada ruta PC19 para $_[0]}, + wpc90s => q{PC90 para $_[0] activado}, + wpc90u => q{PC90 para $_[0] descativado}, + wwv1 => q{$_[0] falta o está fuera de rango}, + wwv2 => q{WWV Duplicado}, + wwv3 => q{Fecha Hora SFI A K Previsión Logger}, + wwvs => q{Activada recepción de anuncios WWV para $_[0]}, + wwvu => q{Desactivada recepción de anuncios WWV para $_[0]}, + wxs => q{Activada recepción de anuncios WX para $_[0]}, + wxu => q{Desactivada recepción de anuncios WX para $_[0]}, }, de => { - addr => 'Adresse gesetzt auf: $_[0]', - already => '$_[0] bereits verbunden', - anns => 'Announce flag gesetzt auf $_[0]', - annu => 'Announce flag zurueckgesetzt auf $_[0]', - annts => 'AnnTalk flag gesetzt auf $_[0]', - anntu => 'AnnTalk flag zurueckgesetzt auf $_[0]', - badnode1 => '$_[0] ist nun ein bad node', - badnode2 => '$_[0] ist nun ein good node', - badnode3 => 'Liste der Bad Nodes:-', - bbse1 => 'Bitte die BBS Adresse eingeben,, set/bbs ', - bbs => 'Deine BBS Adresse ist nun \"$_[0]\"', - beepoff => 'Beeps sind nun aus', - beepon => 'Beeps sind jetzt eingeschaltet', - call1 => 'Callsign lookup via $_[0]:', - conother => 'Sorry $_[0] Du bist zu diesem Cluster auf einem anderen Port connected', - concluster => 'Sorry $_[0] Du bist schon anderswo mit einem Cluster verbunden (on $_[1])', - conscript => 'Kein connect script mit Namen \"$_[0]\" gefunden in $main::root/connect', - confail => 'Verbindungsaufbau zu $_[0] misslungen ($_[1])', - constart => 'Verbindungsaufbau zu $_[0] gestartet', - deluser => 'User $_[0] wurde geloescht', - db1 => 'Diese Datenbank ist untergebracht bei $_[0]', - db2 => 'Sorry, aber Schluesselwort: $_[0] wurde nicht gefunden in $_[1]', - db3 => 'Sorry, Datenbank $_[0] existiert hier nicht', - db4 => 'Sorry, Datenbank $_[0] untergebracht bei $_[1] ist nicht online', - db5 => 'Zugriff auf fremde Datenbank bei $_[0]...standby...', - db6 => 'Datenbank $_[0] existiert bereits, bitte zuerst loeschen', - db7 => 'Datenbank $_[0] angelegt fuer remote Cluster $_[1]', - db8 => 'Datenbank $_[0] lokal angelegt', - db9 => 'Datenbank $_[0] entfernt', - db10 => '$_[0] Datensaetze importiert in $_[1]', - db11 => 'Sende Deine Anfrage(n)an $_[0], bitte stand by...', - db12 => 'DB Name Location Cmd Chain', - dfreq1 => 'Ungueltige Freq $_[0] brauche: z.B. 0/30000 oder hf oder hf/cw', - dir1 => 'Keine Nachricht gefunden', - disc1 => 'Disconnected von $_[0]', - disc2 => 'Kanal $_[0] disconnected', - disc3 => 'Kein Kanal, aber Verbindung $_[0] disconnected', - disc4 => 'Kein Kanal oder Verbindung, aber Waise $_[0] disconnected', - done => 'Done', - dup => 'Sorry, dies ist ein Duplikat', - dx1 => 'Frequenz $_[0] nicht im Band (siehe show/band); Gebrauch: DX [BY call] Freq Call Kommentar', - dx2 => 'Brauche ein Rufzeichen; Gebrauch: DX [BY call] Freq Call Kommentar', - dx3 => 'Das Rufzeichen oder Frequenz ist ungueltig', - dxcqs => 'DX CQ Zones aktiviert fuer $_[0]', - dxcqu => 'DX CQ Zones deaktiviert fuer $_[0]', - dxitus => 'DX ITU Zones aktiviert fuer $_[0]', - dxituu => 'DX ITU Zones deaktiviert fuer $_[0]', - dxs => 'DX Spots flag gesetzt auf $_[0]', - dxu => 'DX Spots flag zurueckgesetzt auf $_[0]', - e1 => 'Ungueltiger Befehl', - e2 => 'Fehler: $_[0]', - e3 => '$_[0]: $_[1] nicht gefunden', - e4 => 'Brauche zumindestens einen Prefix oder ein Rufzeichen', - e5 => 'Nicht erlaubt', - e6 => '*** Keine Station angegeben ***', - e7 => 'Rufzeichen $_[0] nicht sichtbar im Cluster', - e8 => 'Brauche ein Rufzeichen und etwas Text', - e9 => 'Brauche wenigstens etwas Text', - e10 => '$_[0] nicht lokal connected', - e11 => 'Kann nicht $main:mein Rufzeichen als Ziel', - e12 => 'Brauche ein Node Rufzeichen', - e13 => '$_[0] ist kein Node', - e14 => 'Erstes Argument muss eine Zahl und > 0 sein', - e15 => 'Unguelitges Abfragekriterium \"$_[0]\"', - e16 => 'Datei \"$_[0]\" existiert', - e17 => 'Bitte gebrauche dieses Wort: @_ nicht hier', - e18 => 'Kann nicht verbinden mit $_[0] ($!)', - e19 => 'Ungueltiger Character in der Zeile $_[0]', - e20 => 'Kuerzel $_[0] nicht erkannt', - e21 => '$_[0] nicht numerisch', - e22 => '$_[0] kein Rufzeichen', - e23 => '$_[0] kein Bereich (z.B. 0/30000)', - e24 => 'Sorry, Internet Zugriff ist nicht freigeschaltet', - e25 => 'Sorry der Wert muss zwischen $_[0] und $_[1] sein', - e26 => 'Zu viele Fehler gleichzeitig, Du wirst disconnected', - e27 => '$_[0] kein numerisches oder Rufzeichen Prefix', - e28 => 'Sorry, Du musst Dich registrieren (SP $main::myalias to register)', - e29 => 'Brauche eine Passwort', - e30 => 'Kann nicht $_[0] $ oeffnen!', - e31 => '$_[0] ist kein User', - e32 => 'Brauche ein Passwort', - e33 => '$_[0] ist keine Anzahl von Tagen oder ein gueltiges Datum', - e34 => 'Brauche eine GROUP und etwas Text', - e35 => 'Du bist kein Mitglied von $_[0], trete $_[0] bei', - echoon => 'Echo enabled', - echooff => 'Echo disabled', - echow => '*Echo ist momentan disabled, set/echo zum aktivieren', - emaile1 => 'Bitte E-Mail Addresse eingeben, set/email ', - emaila => 'Deine E-Mail Adresse ist nun \"$_[0]\"', - email => 'E-mail Adresse gesetzt auf: $_[0]', - export1 => 'Gebrauch: export ', - export2 => '$_[3] has error exporting msg $_[0]to $_[1] ($_[2])', - export3 => '$_[2 ] exportierte msg $_[0] to $_[1]', - filter1 => 'Filter $_[0] upgedated fuer $_[1]', - filter2 => 'Unbekanntes Filter Schluesselwort $_[0]', - filter3 => 'Keine Filter definiert fuer $_[0]', - filter4 => '$_[0]$_[1] Filter $_[2] geloescht fuer$_[3]', - filter5 => 'brauche ein paar Filter Kommandos...', - filter6 => '$_[0]$_[1] Filter fuer $[2] nicht gefunden', - grids => 'DX Grid flag gesetzt auf $_[0]', - gridu => 'DX Grid flag zurueckgesetzt auf $_[0]', - illcall => 'Sorry, $_[0] ist ein ungueltiges Rufzeichen', - hasha => '$_[0] existiert bereits in $_[1]', - hashb => '$_[0] zugefuegt zu $_[1]', - hashc => '$_[0] entfernt von $_[1]', - hashd => '$_[0] nicht in $_[1]', - hashe => '$_[0] gesetzt auf $_[1]', - helpe1 => 'Hilfe System nicht verfuegbar, bitte Sysop benachrichtigen', - helpe2 => 'Keine Hilfe verfuegbar auf $_[0]', - heres => 'Hier gesetzt auf $_[0]', - heade1 => 'Using $main::mycall Coords, entspricht einem set/location or set/qra', - hereu => 'HERE zurueckgesetzt auf $_[0]', - homebbs => 'Heimat-BBS gesetzt auf: $_[0]', - homenode => 'Heimat-Node gesetzt auf: $_[0]', - hnodee1 => 'Bitte Heimat-Node eingeben, set/homenode ', - hnodee2 => 'Heimat-Node setzen ist misslungen $_[0]', - hnode => 'Dein Heimat-Node ist nun \"$_[0]\"', - init1 => 'Initialisierungs-Nachricht gesendet an $_[0]', - iso => '$_[0] Isoliert', - isou => '$_[0] UnIsoliert', - isoc => '$_[0] erstellt und Isoliert', - isoari => 'Es gibt einen Eingabe Route Filter fuer $_[0]; clear/route input $_[0] zuerst', - isoaro => 'Es gibt einen Ausgabe Route Filter fuer $_[0]; clear/route $_[0] zuerst', - isow => '$_[0] ist isoliert; unset/isolate $_[0] zuerst', - join => 'Trete Gespraechsgruppe $_[0] bei', - l1 => 'Sorry $_[0], Du bist bereits auf einem anderen Kanal eingeloggt', - l2 => 'Moin $_[0], hier ist $main::mycall in $main::myqth\nrunning DXSpider V$main::version build $main::build', - lang => 'Sprache ist jetzt Deutsch', - lange1 => 'set/language wobei ist eine von ($_[0])', - lange2 => 'Fehler beim Setzen der Sprache auf $_[0]', - lh1 => '$main::data/hop_table.pl existiert nicht', - loce1 => 'Bitte Deinen Standort eingeben, set/location ', - loce2 => 'Nicht anerkannt \"$_[0]\" als Lat/Long (z.B. 52 20 N 0 16 E)', - loce3 => '$_[0] ist ein QRA Locator, Gebrauch: set/qra $_[0]', - loc => 'Dein Lat/Long ist nun \"$_[0]\"', - lockout => '$_[0] ausgesperrt', - lockoutc => '$_[0] erstellt und ausgesperrt', - lockoutun => '$_[0] Aussperrung aufgehoben', - lockoutuse => 'Gebrauch: sh/lockout |ALL', - loginu => 'User $_[0] hat eingeloggt', - logoutu => 'User $_[0] hat ausgeloggt', - loginn => 'Node $_[0] hat eingeloggt', - logoutn => 'Node $_[0] hat ausgeloggt', - m1 => 'Betreff eingeben (max. 30 Zeichen):', - m2 => 'Kopie der msg $_[0] gesendet an $_[1]', - m3 => 'Sorry, $_[0] ist keine akzeptable TO Adresse', - m4 => 'Sorry, kann nicht zugreifen auf Nachricht $_[0]', - m5 => 'Sorry, ich brauche eine Nachrichten Nummer', - m6 => 'Reply to: $_[0]', - m7 => 'Betreff : $_[0]', - m8 => 'Nachricht eingeben, /EX zum Absenden oder /ABORT zum Abbrechen', - m9 => 'Neue Nachricht(en) fuer Dich', - m10 => 'Nachricht abgebrochen', - m11 => 'Nachricht Nr. $_[0] gesichert und weitergeleitet an $_[1]', - m12 => 'Nachricht Nr. $_[0] geloescht', - m13 => 'Nachricht Nr. $_[0] fehlt', - m14 => 'Nachricht Nr. $_[0] markiert als gesendet an $_[1]', - m15 => 'Nachricht Nr. $_[0] unmarkiert als gesendet an $_[1]', - m16 => 'Brauche eine Nachrichten-Nummer', - m17 => 'Sorry, kann Nachricht nicht senden im $_[0] Mode', - m18 => 'Sorry, Status von Nachricht Nr. $_[0] ist momentan KEEP', - msg1 => 'Bulletin Nachrichten aufgeschoben', - msg2 => 'Private Nachrichten aufgeschoben', - msg3 => 'Msg $_[0]: $_[1] geaendert von $_[2] auf $_[3]', - msgu => 'Gebrauch: msg data...', - merge1 => 'Merge request fuer $_[1] Spots und $_[2] WWV gesendet an $_[0]', - moon => 'Standort dd/mm/yyyy Rise Set', - moon_with_azel => 'Standort dd/mm/yyyy Rise Set Azim Elev', - mond => 'Ueberwachung Disabled', - mone => 'Ueberwachung Enabled', - namee1 => 'Bitte Deinen Namen eingeben, set/name ', - namee2 => 'Kann User $_[0] nicht finden!', - name => 'Dein Name ist jetzt \"$_[0]\"', - nodea => '$_[0] gesetzt als AK1A style Node', - nodeac => '$_[0] erstellt als AK1A style Node', - nodeb => '$_[0] gesetzt als BBS', - nodebc => '$_[0] erstellt als BBS', - nodec => '$_[0] gesetzt als CLX style Node', - nodecc => '$_[0] erstellt als CLX style Node', - noder => '$_[0] gesetzt als AR-Cluster style Node', - noderc => '$_[0] erstellt als AR-Cluster style Node', - nodes => '$_[0] gesetzt als DXSpider style Node', - nodesc => '$_[0] erstellt als DXSpider style Node', - nodex => '$_[0] gesetzt als DXNET style Node', - nodexc => '$_[0] erstellt als DXNET style Node', - nodeu => '$_[0] zurueckgesetzt als ein User', - nodee1 => 'Du kannst dieses Kommando nicht ausfuehren waehrend Dein Ziel ($_[0]) online ist', - notdone => 'Nicht ausgefuehrt', - nothere => 'Sorry, aber $_[0] ist nicht hier im Moment, bitte spaeter noch einmal Versuchen', - obscount => 'Ping obsolescence count on $_[0] set to $_[1]', - ok => 'Operation erfolgreich', - outconn => 'Outstanding connect to $_[0]', - page => 'Druecke Enter zum fortfahren, A zum abbrechen ($_[0] lines) >', - pagelth => 'Seitenlaenge ist nun $_[0]', - passerr => 'Gebrauch: SET/PASS ', - password => 'Passwort gesetzt oder geaendert fuer $_[0]', - passwordu => 'Passwort geloescht fuer $_[0]', - pingo => 'Ping gestartet nach $_[0]', - pingi => 'Ping erfolgreich zu $_[0] $_[1] (durchschn. $_[2]) Sekunden', - pinge1 => 'Du kannst Dich nicht selber pingen!', - pingint => 'Ping-Intervall zu $_[0] gesetzt auf $_[1] Sekunden', - 'pos' => 'Von Rufzeichen: $_[0] Breite: $_[1] Laenge: $_[2]', - prs => 'Prompt gesetzt auf \"$_[0]\"', - pru => 'Prompt jetzt zurueckgesetzt auf Default-Einstellung', - priv => 'Priviligierten Level geaendert auf $_[0]', - prx => '$main::mycall >', - pw0 => 'Altes Passwort eingeben: ', - pw1 => 'Neues Passwort eingeben: ', - pw2 => 'Wiederhole neues Passwort: ', - pw3 => 'Passwort geaendert', - pw4 => 'Passwoerter differieren, Passwort NICHT geaendert', - qll => 'Bitte gib Deinen Standort als geograph. Koordinaten mit set/location oder als Maidenhead-Kenner mit set/qra ein', - qthe1 => 'Bitte gib Dein QTH ein mit set/qth ', - qth => 'Dein QTH ist nun \"$_[0]\"', - qrae1 => 'Bitte gib Deinen QRA Locator ein mit set/qra (z.B. set/qra JO44RK)', - qrashe1 => 'Bitte einen QRA Locator eingeben, z.B. sh/qra JO02LQ oder sh/qra JO02LQ IO93NS', - qrae2 => 'Erkenne nicht \"$_[0]\" als einen QRA Locator (z.B. JO02LQ)', - qra => 'Dein QRA Locator ist nun \"$_[0]\"', - rcmdo => 'RCMD \"$_[0]\" gesendet an $_[1]', - read1 => 'Sorry, keine neuen Nachrichten fuer Dich', - read2 => 'Msg $_[0] nicht gefunden', - read3 => 'Msg $_[0] nicht verfuegbar', - rec => '$_[0] records', - reg => '$_[0] registriert', - regc => '$_[0] erstellt und registriert', - reginac => 'Registrierung ist nicht aktiv (set/var \$main::reqreg = 1 to activate)', - regun => '$_[0] unregistriert', - route => '$_[0] auf $_[1] via $_[2]', - sat1 => 'Tracking Tabelle fuer $_[0] fuer die naechsten $_[1] Stunden alle $_[2] mins', - sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km', - sat3 => 'Syntax: SH/SAT [ ]', - sat4 => 'Satelliten verfuegbar:-', - sat5 => 'Brauche nnnnn.AMSAT im Betreff um Keplerelemente von dieser Nachricht zu laden', - satnf => 'Satellit $_[0] unbekannt', - satdisc => '-----', - sethop1 => 'Gebrauch: set/hops ann|spots|wwv|wcy ', - sethop2 => '$_[0] hops gesetzt auf $_[1]$_[2] fuer $_[3]', - sethop3 => 'Keine hops gesetzt fuer $_[0]', - shu => '\"SHU\" genuegt nicht! Du musst mindestens \"SHUT\" eingeben, um den Node herunterzufahren', - shutting => '$main::mycall shutting down...', - sloc => 'Cluster lat $_[0] long $_[1], Nicht vergessen die DXVars.pm zu aendern', - snode1 => 'Node Call Sort Version', - snode2 => '$_[0] $_[1] $_[2]', - snode3 => '$_[0] Unbekanntes Rufzeichen', - sqra => 'Cluster QRA Locator$_[0], Nicht vergessen die DXVars.pm zu aendern', - sorry => 'Sorry', - spf1 => 'spoof: erzeuge neuen User $_[0]', - stathf => 'HF DX Spot Stats, letzte 31 Tage', - stathft => 'HF DX Spot Stats, letzte 31 Tage fuer DXCC $_[0]', - statvhf => 'VHF+ DX Spot Stats, letzte 31 Tage', - statvhft => 'VHF+ DX Spot Stats, letzte 31 Tage fuer DXCC $_[0]', - statdx => 'Total DX Spots letzte 31 Tage', - sun => 'Location dd/mm/jjjj Rise Set', - sun_with_azel => 'Location dd/mm/jjjj Rise Set Azim Elev', - suser1 => 'Gebrauch: Rufzeichen user_field_name value', - suser2 => 'User $_[0] nicht gefunden', - suser3 => 'User Feld \'$_[0]\' war \'$_[1]\' nun gesetzt auf \'$_[2]\'', - suser4 => 'User Feld Name \'$_[0]\' existiert nicht', - time1 => 'Lokala Zeit: $_[0] $_[1], UTC $_[2]', - time2 => '$_[0] Lokale (standard) Zeit: $_[1] ($_[2] Stunden)', - time3 => '$_[0] $_[1]', - talks => 'Talk flag gesetzt auf $_[0]', - talku => 'Talk flag zurueckgesetzt auf $_[0]', - talkend => 'Beendet Talk zu Dir', - talkinst => 'Talkmode, /EX zum Beenden, / um ein Kommando auszufuehren', - talknh => 'Sorry $_[0] ist im moment nicht online', - talkprompt => 'Talk ($_[0])>', - talkstart => 'Startet Talkmode zu Dir', - unset => '$_[0] deaktiviert fuer $_[1]', - unsethop1 => 'Gebrauch: unset/hops ann|spots|wwv|wcy', - user => 'User', - userconn => 'Rufzeichen verbunden mit', - usernf => '*** User Satz fuer $_[0] nicht gefunden ***', - wwvs => 'WWV flag gesetzt auf $_[0]', - wwvu => 'WWV flag zurueckgesetzt auf $_[0]', - wxs => 'WX flag gesetzt auf $_[0]', - wxu => 'WX flag zurueckgesetzt auf $_[0]', + + addr => q{Adresse gesetzt auf: $_[0]}, + already => q{$_[0] bereits verbunden}, + anns => q{Announce flag gesetzt auf $_[0]}, + annu => q{Announce flag zurueckgesetzt auf $_[0]}, + annts => q{AnnTalk flag gesetzt auf $_[0]}, + anntu => q{AnnTalk flag zurueckgesetzt auf $_[0]}, + badnode1 => q{$_[0] ist nun ein bad node}, + badnode2 => q{$_[0] ist nun ein good node}, + badnode3 => q{Liste der Bad Nodes:-}, + bbse1 => q{Bitte die BBS Adresse eingeben,, set/bbs }, + bbs => q{Deine BBS Adresse ist nun "$_[0]"}, + beepoff => q{Beeps sind nun aus}, + beepon => q{Beeps sind jetzt eingeschaltet}, + call1 => q{Callsign lookup via $_[0]:}, + conother => q{Sorry $_[0] Du bist zu diesem Cluster auf einem anderen Port connected}, + concluster => q{Sorry $_[0] Du bist schon anderswo mit einem Cluster verbunden (on $_[1])}, + conscript => q{Kein connect script mit Namen "$_[0]" gefunden in $main::root/connect}, + confail => q{Verbindungsaufbau zu $_[0] misslungen ($_[1])}, + constart => q{Verbindungsaufbau zu $_[0] gestartet}, + deluser => q{User $_[0] wurde geloescht}, + db1 => q{Diese Datenbank ist untergebracht bei $_[0]}, + db2 => q{Sorry, aber Schluesselwort: $_[0] wurde nicht gefunden in $_[1]}, + db3 => q{Sorry, Datenbank $_[0] existiert hier nicht}, + db4 => q{Sorry, Datenbank $_[0] untergebracht bei $_[1] ist nicht online}, + db5 => q{Zugriff auf fremde Datenbank bei $_[0]...standby...}, + db6 => q{Datenbank $_[0] existiert bereits, bitte zuerst loeschen}, + db7 => q{Datenbank $_[0] angelegt fuer remote Cluster $_[1]}, + db8 => q{Datenbank $_[0] lokal angelegt}, + db9 => q{Datenbank $_[0] entfernt}, + db10 => q{$_[0] Datensaetze importiert in $_[1]}, + db11 => q{Sende Deine Anfrage(n)an $_[0], bitte stand by...}, + db12 => q{DB Name Location Cmd Chain}, + dfreq1 => q{Ungueltige Freq $_[0] brauche: z.B. 0/30000 oder hf oder hf/cw}, + dir1 => q{Keine Nachricht gefunden}, + disc1 => q{Disconnected von $_[0]}, + disc2 => q{Kanal $_[0] disconnected}, + disc3 => q{Kein Kanal, aber Verbindung $_[0] disconnected}, + disc4 => q{Kein Kanal oder Verbindung, aber Waise $_[0] disconnected}, + done => q{Done}, + dup => q{Sorry, dies ist ein Duplikat}, + dx1 => q{Frequenz $_[0] nicht im Band (siehe show/band); Gebrauch: DX [BY call] Freq Call Kommentar}, + dx2 => q{Brauche ein Rufzeichen; Gebrauch: DX [BY call] Freq Call Kommentar}, + dx3 => q{Das Rufzeichen oder Frequenz ist ungueltig}, + dxcqs => q{DX CQ Zones aktiviert fuer $_[0]}, + dxcqu => q{DX CQ Zones deaktiviert fuer $_[0]}, + dxitus => q{DX ITU Zones aktiviert fuer $_[0]}, + dxituu => q{DX ITU Zones deaktiviert fuer $_[0]}, + dxs => q{DX Spots flag gesetzt auf $_[0]}, + dxu => q{DX Spots flag zurueckgesetzt auf $_[0]}, + e1 => q{Ungueltiger Befehl}, + e2 => q{Fehler: $_[0]}, + e3 => q{$_[0]: $_[1] nicht gefunden}, + e4 => q{Brauche zumindestens einen Prefix oder ein Rufzeichen}, + e5 => q{Nicht erlaubt}, + e6 => q{*** Keine Station angegeben ***}, + e7 => q{Rufzeichen $_[0] nicht sichtbar im Cluster}, + e8 => q{Brauche ein Rufzeichen und etwas Text}, + e9 => q{Brauche wenigstens etwas Text}, + e10 => q{$_[0] nicht lokal connected}, + e11 => q{Kann nicht $main:mein Rufzeichen als Ziel}, + e12 => q{Brauche ein Node Rufzeichen}, + e13 => q{$_[0] ist kein Node}, + e14 => q{Erstes Argument muss eine Zahl und > 0 sein}, + e15 => q{Unguelitges Abfragekriterium "$_[0]"}, + e16 => q{Datei "$_[0]" existiert}, + e17 => q{Bitte gebrauche dieses Wort: @_ nicht hier}, + e18 => q{Kann nicht verbinden mit $_[0] ($!)}, + e19 => q{Ungueltiger Character in der Zeile $_[0]}, + e20 => q{Kuerzel $_[0] nicht erkannt}, + e21 => q{$_[0] nicht numerisch}, + e22 => q{$_[0] kein Rufzeichen}, + e23 => q{$_[0] kein Bereich (z.B. 0/30000)}, + e24 => q{Sorry, Internet Zugriff ist nicht freigeschaltet}, + e25 => q{Sorry der Wert muss zwischen $_[0] und $_[1] sein}, + e26 => q{Zu viele Fehler gleichzeitig, Du wirst disconnected}, + e27 => q{$_[0] kein numerisches oder Rufzeichen Prefix}, + e28 => q{Sorry, Du musst Dich registrieren (SP $main::myalias to register)}, + e29 => q{Brauche eine Passwort}, + e30 => q{Kann nicht $_[0] $ oeffnen!}, + e31 => q{$_[0] ist kein User'}, + e32 => q{Brauche ein Passwort}, + e33 => q{$_[0] ist keine Anzahl von Tagen oder ein gueltiges Datum}, + e34 => q{Brauche eine GROUP und etwas Text}, + e35 => q{Du bist kein Mitglied von $_[0], trete $_[0] bei}, + echoon => q{Echo enabled}, + echooff => q{Echo disabled}, + echow => q{*Echo ist momentan disabled, set/echo zum aktivieren}, + emaile1 => q{Bitte E-Mail Addresse eingeben, set/email }, + emaila => q{Deine E-Mail Adresse ist nun "$_[0]"}, + email => q{E-mail Adresse gesetzt auf: $_[0]}, + export1 => q{Gebrauch: export }, + export2 => q{$_[3] has error exporting msg $_[0]to $_[1] ($_[2])}, + export3 => q{$_[2 ] exportierte msg $_[0] to $_[1]}, + filter1 => q{Filter $_[0] upgedated fuer $_[1]}, + filter2 => q{Unbekanntes Filter Schluesselwort $_[0]}, + filter3 => q{Keine Filter definiert fuer $_[0]}, + filter4 => q{$_[0]$_[1] Filter $_[2] geloescht fuer$_[3]}, + filter5 => q{brauche ein paar Filter Kommandos...}, + filter6 => q{$_[0]$_[1] Filter fuer $[2] nicht gefunden}, + grids => q{DX Grid flag gesetzt auf $_[0]}, + gridu => q{DX Grid flag zurueckgesetzt auf $_[0]}, + illcall => q{Sorry, $_[0] ist ein ungueltiges Rufzeichen}, + hasha => q{$_[0] existiert bereits in $_[1]}, + hashb => q{$_[0] zugefuegt zu $_[1]}, + hashc => q{$_[0] entfernt von $_[1]}, + hashd => q{$_[0] nicht in $_[1]}, + hashe => q{$_[0] gesetzt auf $_[1]}, + helpe1 => q{Hilfe System nicht verfuegbar, bitte Sysop benachrichtigen}, + helpe2 => q{Keine Hilfe verfuegbar auf $_[0]}, + heres => q{Hier gesetzt auf $_[0]}, + heade1 => q{Using $main::mycall Coords, entspricht einem set/location or set/qra}, + hereu => q{HERE zurueckgesetzt auf $_[0]}, + homebbs => q{Heimat-BBS gesetzt auf: $_[0]}, + homenode => q{Heimat-Node gesetzt auf: $_[0]}, + hnodee1 => q{Bitte Heimat-Node eingeben, set/homenode }, + hnodee2 => q{Heimat-Node setzen ist misslungen $_[0]}, + hnode => q{Dein Heimat-Node ist nun "$_[0]"}, + init1 => q{Initialisierungs-Nachricht gesendet an $_[0]}, + iso => q{$_[0] Isoliert}, + isou => q{$_[0] UnIsoliert}, + isoc => q{$_[0] erstellt und Isoliert}, + isoari => q{Es gibt einen Eingabe Route Filter fuer $_[0]; clear/route input $_[0] zuerst}, + isoaro => q{Es gibt einen Ausgabe Route Filter fuer $_[0]; clear/route $_[0] zuerst}, + isow => q{$_[0] ist isoliert; unset/isolate $_[0] zuerst}, + join => q{Trete Gespraechsgruppe $_[0] bei}, + l1 => q{Sorry $_[0], Du bist bereits auf einem anderen Kanal eingeloggt}, + l2 => q{Moin $_[0], hier ist $main::mycall in $main::myqth\nrunning DXSpider V$main::version build $main::build}, + lang => q{Sprache ist jetzt Deutsch}, + lange1 => q{set/language wobei ist eine von ($_[0])}, + lange2 => q{Fehler beim Setzen der Sprache auf $_[0]}, + lh1 => q{$main::data/hop_table.pl existiert nicht}, + loce1 => q{Bitte Deinen Standort eingeben, set/location }, + loce2 => q{Nicht anerkannt "$_[0]" als Lat/Long (z.B. 52 20 N 0 16 E)}, + loce3 => q{$_[0] ist ein QRA Locator, Gebrauch: set/qra $_[0]}, + loc => q{Dein Lat/Long ist nun "$_[0]"}, + lockout => q{$_[0] ausgesperrt}, + lockoutc => q{$_[0] erstellt und ausgesperrt}, + lockoutun => q{$_[0] Aussperrung aufgehoben}, + lockoutuse => q{Gebrauch: sh/lockout |ALL}, + loginu => q{User $_[0] hat eingeloggt}, + logoutu => q{User $_[0] hat ausgeloggt}, + loginn => q{Node $_[0] hat eingeloggt}, + logoutn => q{Node $_[0] hat ausgeloggt}, + m1 => q{Betreff eingeben (max. 30 Zeichen):}, + m2 => q{Kopie der msg $_[0] gesendet an $_[1]}, + m3 => q{Sorry, $_[0] ist keine akzeptable TO Adresse}, + m4 => q{Sorry, kann nicht zugreifen auf Nachricht $_[0]}, + m5 => q{Sorry, ich brauche eine Nachrichten Nummer}, + m6 => q{Reply to: $_[0]}, + m7 => q{Betreff : $_[0]}, + m8 => q{Nachricht eingeben, /EX zum Absenden oder /ABORT zum Abbrechen}, + m9 => q{Neue Nachricht(en) fuer Dich}, + m10 => q{Nachricht abgebrochen}, + m11 => q{Nachricht Nr. $_[0] gesichert und weitergeleitet an $_[1]}, + m12 => q{Nachricht Nr. $_[0] geloescht}, + m13 => q{Nachricht Nr. $_[0] fehlt}, + m14 => q{Nachricht Nr. $_[0] markiert als gesendet an $_[1]}, + m15 => q{Nachricht Nr. $_[0] unmarkiert als gesendet an $_[1]}, + m16 => q{Brauche eine Nachrichten-Nummer}, + m17 => q{Sorry, kann Nachricht nicht senden im $_[0] Mode}, + m18 => q{Sorry, Status von Nachricht Nr. $_[0] ist momentan KEEP}, + msg1 => q{Bulletin Nachrichten aufgeschoben}, + msg2 => q{Private Nachrichten aufgeschoben}, + msg3 => q{Msg $_[0]: $_[1] geaendert von $_[2] auf $_[3]}, + msgu => q{Gebrauch: msg data...}, + merge1 => q{Merge request fuer $_[1] Spots und $_[2] WWV gesendet an $_[0]}, + moon => q{Standort dd/mm/yyyy Rise Set}, + moon_with_azel => q{Standort dd/mm/yyyy Rise Set Azim Elev}, + mond => q{Ueberwachung Disabled}, + mone => q{Ueberwachung Enabled}, + namee1 => q{Bitte Deinen Namen eingeben, set/name }, + namee2 => q{Kann User $_[0] nicht finden!}, + name => q{Dein Name ist jetzt "$_[0]"}, + nodea => q{$_[0] gesetzt als AK1A style Node}, + nodeac => q{$_[0] erstellt als AK1A style Node}, + nodeb => q{$_[0] gesetzt als BBS}, + nodebc => q{$_[0] erstellt als BBS}, + nodec => q{$_[0] gesetzt als CLX style Node}, + nodecc => q{$_[0] erstellt als CLX style Node}, + noder => q{$_[0] gesetzt als AR-Cluster style Node}, + noderc => q{$_[0] erstellt als AR-Cluster style Node}, + nodes => q{$_[0] gesetzt als DXSpider style Node}, + nodesc => q{$_[0] erstellt als DXSpider style Node}, + nodex => q{$_[0] gesetzt als DXNET style Node}, + nodexc => q{$_[0] erstellt als DXNET style Node}, + nodeu => q{$_[0] zurueckgesetzt als ein User}, + nodee1 => q{Du kannst dieses Kommando nicht ausfuehren waehrend Dein Ziel ($_[0]) online ist}, + notdone => q{Nicht ausgefuehrt}, + nothere => q{Sorry, aber $_[0] ist nicht hier im Moment, bitte spaeter noch einmal Versuchen}, + obscount => q{Ping obsolescence count on $_[0] set to $_[1]}, + ok => q{Operation erfolgreich}, + outconn => q{Outstanding connect to $_[0]}, + page => q{Druecke Enter zum fortfahren, A zum abbrechen ($_[0] lines) >}, + pagelth => q{Seitenlaenge ist nun $_[0]}, + passerr => q{Gebrauch: SET/PASS }, + password => q{Passwort gesetzt oder geaendert fuer $_[0]}, + passwordu => q{Passwort geloescht fuer $_[0]}, + pingo => q{Ping gestartet nach $_[0]}, + pingi => q{Ping erfolgreich zu $_[0] $_[1] (durchschn. $_[2]) Sekunden}, + pinge1 => q{Du kannst Dich nicht selber pingen!}, + pingint => q{Ping-Intervall zu $_[0] gesetzt auf $_[1] Sekunden}, + 'pos' => q{Von Rufzeichen: $_[0] Breite: $_[1] Laenge: $_[2]}, + prs => q{Prompt gesetzt auf "$_[0]"}, + pru => q{Prompt jetzt zurueckgesetzt auf Default-Einstellung}, + priv => q{Priviligierten Level geaendert auf $_[0]}, + prx => q{$main::mycall >}, + pw0 => q{Altes Passwort eingeben: }, + pw1 => q{Neues Passwort eingeben: }, + pw2 => q{Wiederhole neues Passwort: }, + pw3 => q{Passwort geaendert}, + pw4 => q{Passwoerter differieren, Passwort NICHT geaendert}, + qll => q{Bitte gib Deinen Standort als geograph. Koordinaten mit set/location oder als Maidenhead-Kenner mit set/qra ein}, + qthe1 => q{Bitte gib Dein QTH ein mit set/qth }, + qth => q{Dein QTH ist nun "$_[0]"}, + qrae1 => q{Bitte gib Deinen QRA Locator ein mit set/qra (z.B. set/qra JO44RK)}, + qrashe1 => q{Bitte einen QRA Locator eingeben, z.B. sh/qra JO02LQ oder sh/qra JO02LQ IO93NS}, + qrae2 => q{Erkenne nicht "$_[0]" als einen QRA Locator (z.B. JO02LQ)}, + qra => q{Dein QRA Locator ist nun "$_[0]"}, + rcmdo => q{RCMD "$_[0]" gesendet an $_[1]}, + read1 => q{Sorry, keine neuen Nachrichten fuer Dich}, + read2 => q{Msg $_[0] nicht gefunden}, + read3 => q{Msg $_[0] nicht verfuegbar}, + rec => q{$_[0] records}, + reg => q{$_[0] registriert}, + regc => q{$_[0] erstellt und registriert}, + reginac => q{Registrierung ist nicht aktiv (set/var \$main::reqreg = 1 to activate)}, + regun => q{$_[0] unregistriert}, + route => q{$_[0] auf $_[1] via $_[2]}, + sat1 => q{Tracking Tabelle fuer $_[0] fuer die naechsten $_[1] Stunden alle $_[2] mins}, + sat2 => q{dd/mm UTC Lat Lon Alt Km Az El Dist Km}, + sat3 => q{Syntax: SH/SAT [ ]}, + sat4 => q{Satelliten verfuegbar:-}, + sat5 => q{Brauche nnnnn.AMSAT im Betreff um Keplerelemente von dieser Nachricht zu laden}, + satnf => q{Satellit $_[0] unbekannt}, + satdisc => q{-----}, + sethop1 => q{Gebrauch: set/hops ann|spots|wwv|wcy }, + sethop2 => q{$_[0] hops gesetzt auf $_[1]$_[2] fuer $_[3]}, + sethop3 => q{Keine hops gesetzt fuer $_[0]}, + shu => q{"SHU" genuegt nicht! Du musst mindestens "SHUT" eingeben, um den Node herunterzufahren}, + shutting => q{$main::mycall shutting down...}, + sloc => q{Cluster lat $_[0] long $_[1], Nicht vergessen die DXVars.pm zu aendern}, + snode1 => q{Node Call Sort Version}, + snode2 => q{$_[0] $_[1] $_[2]}, + snode3 => q{$_[0] Unbekanntes Rufzeichen}, + sqra => q{Cluster QRA Locator$_[0], Nicht vergessen die DXVars.pm zu aendern}, + sorry => q{Sorry}, + spf1 => q{spoof: erzeuge neuen User $_[0]}, + stathf => q{HF DX Spot Stats, letzte 31 Tage}, + stathft => q{HF DX Spot Stats, letzte 31 Tage fuer DXCC $_[0]}, + statvhf => q{VHF+ DX Spot Stats, letzte 31 Tage}, + statvhft => q{VHF+ DX Spot Stats, letzte 31 Tage fuer DXCC $_[0]}, + statdx => q{Total DX Spots letzte 31 Tage}, + sun => q{Location dd/mm/jjjj Rise Set}, + sun_with_azel => q{Location dd/mm/jjjj Rise Set Azim Elev}, + suser1 => q{Gebrauch: Rufzeichen user_field_name value}, + suser2 => q{User $_[0] nicht gefunden}, + suser3 => q{User Feld '$_[0]' war '$_[1]' nun gesetzt auf '$_[2]'}, + suser4 => q{User Feld Name '$_[0]' existiert nicht}, + time1 => q{Lokala Zeit: $_[0] $_[1], UTC $_[2]}, + time2 => q{$_[0] Lokale (standard) Zeit: $_[1] ($_[2] Stunden)}, + time3 => q{$_[0] $_[1]}, + talks => q{Talk flag gesetzt auf $_[0]}, + talku => q{Talk flag zurueckgesetzt auf $_[0]}, + talkend => q{Beendet Talk zu Dir}, + talkinst => q{Talkmode, /EX zum Beenden, / um ein Kommando auszufuehren}, + talknh => q{Sorry $_[0] ist im moment nicht online}, + talkprompt => q{Talk ($_[0])>}, + talkstart => q{Startet Talkmode zu Dir}, + unset => q{$_[0] deaktiviert fuer $_[1]}, + unsethop1 => q{Gebrauch: unset/hops ann|spots|wwv|wcy}, + user => q{User}, + userconn => q{Rufzeichen verbunden mit}, + usernf => q{*** User Satz fuer $_[0] nicht gefunden ***}, + wwvs => q{WWV flag gesetzt auf $_[0]}, + wwvu => q{WWV flag zurueckgesetzt auf $_[0]}, + wxs => q{WX flag gesetzt auf $_[0]}, + wxu => q{WX flag zurueckgesetzt auf $_[0]}, }, it => { - addr => 'Indirizzo impostato a: $_[0]', - already => '$_[0] e\' connesso', - anns => 'Annunci attivati alle_[0]', - annu => 'Annunci disattivati alle $_[0]', - annts => 'Talk attivato alle $_[0]', - anntu => 'Talk disattivato alle $_[0]', - badnode1 => '$_[0] e\' un nodo disabilitato', - badnode2 => '$_[0] e\' un nodo attivo', - badnode3 => 'Lista dei nodi disabilitati:-', - bbse1 => 'Per favore inserisci l\'indirizzo del tuo BBS con set/bbs ', - bbs => 'Il tuo BBS e\' ora \"$_[0]\"', - beepoff => 'I beep sono disattivati', - beepon => 'I beep sono attivati', - call1 => 'Ricerca del nominativo via $_[0]:', - conother => 'Spiacente $_[0] sei connesso già su un\'altra porta', - concluster => 'Spiacente $_[0] sei connesso già alla rete cluster (su $_[1])', - conscript => 'nessuno script di connessione chiamato \"$_[0]\" trovato in $main::root/connect', - confail => 'connessione a $_[0] fallita ($_[1])', - constart => 'connessione a $_[0] iniziata', - deluser => 'L\'utente $_[0] e\' stato eliminato', - db1 => 'Questo database e\' presso $_[0]', - db2 => 'Spiacente, ma la chiave: $_[0] non e\' stata trovata in $_[1]', - db3 => 'Spiacente, il database $_[0] non esiste qui', - db4 => 'Spiacente, il database $_[0] presso $_[1] non e\' disponibile al momento', - db5 => 'Sto accedendo al database remoto presso $_[0]...attendere...', - db6 => 'Il database $_[0] esiste già, cancellalo prima', - db7 => 'Il database $_[0] e\' stato creato per il nodo remoto $_[1]', - db8 => 'Il database $_[0] e\' stato creato localmente', - db9 => 'Il database $_[0] e\' stato eliminato', - db10 => '$_[0] record importati in $_[1]', - db11 => 'Sto inviando le tue richieste a $_[0], attendi...', - dfreq1 => 'Frequenza non valida $_[0], deve essere del tipo 0/30000 o hf o hf/cw', - dir1 => 'Nessun messaggio trovato', - disc1 => 'Disconnesso da $_[0]', - disc2 => 'Canalew $_[0] disconnesso', - disc3 => 'Nessun canale, ma la connessione $_[0] disconnessa', - disc4 => 'Nessun canale o connessione ma $_[0] disconnesso', - done => 'Fatto', - dup => 'Spiacente, questo e\' un doppione', - dx1 => 'Frequenza $_[0] non nella banda (controlla show/band); sintassi: DX [BY nominativo] freq nominativo commento', - dx2 => 'Serve un nominatico; sintassi: DX [BY nominativo] freq nominativo commento', - dx3 => 'Il nominativo o la frequenza sono errati', - dxs => 'DX Spots attivati alle $_[0]', - dxu => 'DX Spots disattivati alle $_[0]', - e1 => 'Comando errato', - e2 => 'Errore: $_[0]', - e3 => '$_[0]: $_[1] non trovato', - e4 => 'Inserire un prefisso o un nominativo', - e5 => 'Non permesso', - e6 => '*** Nessuna stazione specificata ***', - e7 => 'il nominativo $_[0] non e\' visibile sul cluster', - e8 => 'Inserire un nominativo o del testo', - e9 => 'Inserire del testo', - e10 => '$_[0] non connesso localmente', - e11 => 'Impossibile usare $main:mycall come destinazione', - e12 => 'Inserire il nominativo di un nodo', - e13 => '$_[0] non e\' un nodo', - e14 => 'Il primo argomento deve essere numerico e > 0', - e15 => 'qualificatore non valido \"$_[0]\"', - e16 => 'Il file \"$_[0]\" esiste', - e17 => 'Non usare le parole: @_ qui', - e18 => 'Impossibile connettere $_[0] ($!)', - e19 => 'Carattere non valido nella linea $_[0]', - e20 => 'separatore $_[0] non riconosciuto', - e21 => '$_[0] non e\' numerico', - e22 => '$_[0] non e\' un nominativo', - e23 => '$_[0] non e\' un intervallo (es 0/30000)', - e24 => 'Spiacente, l\'accesso ad internet non e\' abilitato', - e25 => 'Spiacente il valore deve essere tra $_[0] e $_[1]', - e26 => 'Troppi errori, stai per essere disconnesso', - e27 => '$_[0] non e\' un prefisso numeroco o di nominativo', - e28 => 'Spiacente, devi essere registrato (SP $main::myalias per registrarti)', - e29 => 'E\' necessaria una password', + addr => q{Indirizzo impostato a: $_[0]}, + already => q{$_[0] e' connesso}, + anns => q{Annunci attivati alle_[0]}, + annu => q{Annunci disattivati alle $_[0]}, + annts => q{Talk attivato alle $_[0]}, + anntu => q{Talk disattivato alle $_[0]}, + badnode1 => q{$_[0] e' un nodo disabilitato}, + badnode2 => q{$_[0] e' un nodo attivo}, + badnode3 => q{Lista dei nodi disabilitati:-}, + bbse1 => q{Per favore inserisci l'indirizzo del tuo BBS con set/bbs }, + bbs => q{Il tuo BBS e' ora "$_[0]"}, + beepoff => q{I beep sono disattivati}, + beepon => q{I beep sono attivati}, + call1 => q{Ricerca del nominativo via $_[0]:}, + conother => q{Spiacente $_[0] sei connesso già su un'altra porta}, + concluster => q{Spiacente $_[0] sei connesso già alla rete cluster (su $_[1])}, + conscript => q{nessuno script di connessione chiamato "$_[0]" trovato in $main::root/connect}, + confail => q{connessione a $_[0] fallita ($_[1])}, + constart => q{connessione a $_[0] iniziata}, + deluser => q{L'utente $_[0] e' stato eliminato}, + db1 => q{Questo database e' presso $_[0]}, + db2 => q{Spiacente, ma la chiave: $_[0] non e' stata trovata in $_[1]}, + db3 => q{Spiacente, il database $_[0] non esiste qui}, + db4 => q{Spiacente, il database $_[0] presso $_[1] non e' disponibile al momento}, + db5 => q{Sto accedendo al database remoto presso $_[0]...attendere...}, + db6 => q{Il database $_[0] esiste già, cancellalo prima}, + db7 => q{Il database $_[0] e' stato creato per il nodo remoto $_[1]}, + db8 => q{Il database $_[0] e' stato creato localmente}, + db9 => q{Il database $_[0] e' stato eliminato}, + db10 => q{$_[0] record importati in $_[1]}, + db11 => q{Sto inviando le tue richieste a $_[0], attendi...}, + dfreq1 => q{Frequenza non valida $_[0], deve essere del tipo 0/30000 o hf o hf/cw'}, + dir1 => q{Nessun messaggio trovato}, + disc1 => q{Disconnesso da $_[0]}, + disc2 => q{Canalew $_[0] disconnesso}, + disc3 => q{Nessun canale, ma la connessione $_[0] disconnessa}, + disc4 => q{Nessun canale o connessione ma $_[0] disconnesso}, + done => q{Fatto}, + dup => q{Spiacente, questo e' un doppione}, + dx1 => q{Frequenza $_[0] non nella banda (controlla show/band); sintassi: DX [BY nominativo] freq nominativo commento}, + dx2 => q{Serve un nominatico; sintassi: DX [BY nominativo] freq nominativo commento}, + dx3 => q{Il nominativo o la frequenza sono errati}, + dxs => q{DX Spots attivati alle $_[0]}, + dxu => q{DX Spots disattivati alle $_[0]}, + e1 => q{Comando errato}, + e2 => q{Errore: $_[0]}, + e3 => q{$_[0]: $_[1] non trovato}, + e4 => q{Inserire un prefisso o un nominativo}, + e5 => q{Non permesso}, + e6 => q{*** Nessuna stazione specificata ***}, + e7 => q{il nominativo $_[0] non e' visibile sul cluster}, + e8 => q{Inserire un nominativo o del testo}, + e9 => q{Inserire del testo}, + e10 => q{$_[0] non connesso localmente}, + e11 => q{Impossibile usare $main:mycall come destinazione}, + e12 => q{Inserire il nominativo di un nodo}, + e13 => q{$_[0] non e' un nodo}, + e14 => q{Il primo argomento deve essere numerico e > 0}, + e15 => q{qualificatore non valido "$_[0]"}, + e16 => q{Il file "$_[0]" esiste}, + e17 => q{Non usare le parole: @_ qui'}, + e18 => q{Impossibile connettere $_[0] ($!)}, + e19 => q{Carattere non valido nella linea $_[0]}, + e20 => q{separatore $_[0] non riconosciuto}, + e21 => q{$_[0] non e' numerico}, + e22 => q{$_[0] non e' un nominativo}, + e23 => q{$_[0] non e' un intervallo (es 0/30000)'}, + e24 => q{Spiacente, l'accesso ad internet non e' abilitato}, + e25 => q{Spiacente il valore deve essere tra $_[0] e $_[1]}, + e26 => q{Troppi errori, stai per essere disconnesso}, + e27 => q{$_[0] non e' un prefisso numeroco o di nominativo'}, + e28 => q{Spiacente, devi essere registrato (SP $main::myalias per registrarti)}, + e29 => q{E' necessaria una password}, + + echoon => q{Echo abilitato}, + echooff => q{Echo disabilitato}, + echow => q{*Echo e' al momento disabilitato, usa set/echo per abilitarlo}, + emaile1 => q{Per favore inserisci il tuo indirizzo email con: set/email }, + emaila => q{Il tuo indirizzo email e' ora "$_[0]"}, + email => q{Indirizzo email impostato a: $_[0]}, + export1 => q{sintassi: export }, + export2 => q{$_[3] ha problemi esportando i messaggi da $_[0] a $_[1] ($_[2])}, + export3 => q{$_[2 ] messaggi esportati da $_[0] a $_[1]}, + filter1 => q{Filtro $_[0] aggiornato per $_[1]}, + filter2 => q{Chiave sconosciuta per il filtro $_[0]}, + filter3 => q{Nessun filtro definito per $_[0]}, + filter4 => q{$_[0]$_[1] Filtro $_[2] cancellato per $_[3]}, + filter5 => q{necessito qualche comando per i filtri...}, + filter6 => q{$_[0]$_[1] Filtro per $[2] non trovato}, + grids => q{DX Grid attivato alle $_[0]}, + gridu => q{DX Grid disattivato alle $_[0]}, + illcall => q{Spiacente, $_[0] non e' un nominativo valido}, + hasha => q{$_[0] già esiste $_[1]}, + hashb => q{$_[0] aggiunto a $_[1]}, + hashc => q{$_[0] rimosso da $_[1]}, + hashd => q{$_[0] non in $_[1]'}, + hashe => q{$_[0] impostato a $_[1]'}, + helpe1 => q{Aiuto non disponibile, contatta il sysop}, + helpe2 => q{Nessun aiuto per $_[0]}, + heres => q{Here abilitato per $_[0]}, + heade1 => q{Sto usando le coordinate $main::mycall, e' preferibile impostarle con set/location o set/qra}, + hereu => q{Here disattivato per $_[0]}, + homebbs => q{Home BBS impostata a: $_[0]}, + homenode => q{Home Node impostato a: $_[0]}, + hnodee1 => q{Per piacere imposta il tuo Home Node con set/homenode }, + hnodee2 => q{Impostazione dell'homenode fallita per $_[0]}, + hnode => q{Il tuo Homenode e' adesso "$_[0]"}, + init1 => q{inizializzaione inviata a $_[0]}, + iso => q{$_[0] Isolato}, + isou => q{$_[0] non Isolato}, + isoc => q{$_[0] creato ed isolato}, + isoari => q{c'e' una filtro sulla rotta in ingresso per $_[0]; eliminala con clear/route input $_[0] prima}, + isoaro => q{c'e' una filtro sulla rotta in uscita per $_[0]; eliminala con clear/route $_[0] prima}, + isow => q{$_[0] e' isolato; unset/isolate $_[0] prima}, + l1 => q{Spiacente $_[0], sei già collegato sun un altro canale}, + l2 => q{Benvenuto $_[0] sul Cluster $main::mycall a $main::myqth\nsoftware in uso DXSpider V$main::version build $main::build}, + lang => q{La lingua selezionata e' adesso Italiano}, + lange1 => q{set/language dove e' una tra ($_[0])}, + lange2 => q{impostazione lingua fallita per $_[0]'}, + lh1 => q{$main::data/hop_table.pl non esiste}, + loce1 => q{Per piacere inserisci la tua posizione, set/location }, + loce2 => q{Non riconosco "$_[0]" come Lat/Long (es 52 20 N 0 16 E)}, + loce3 => q{$_[0] e' una locatore QRA, usa: set/qra $_[0]}, + loc => q{I tuoi dati Lat/Long sono ora "$_[0]"}, + lockout => q{$_[0] Bloccato}, + lockoutc => q{$_[0] Creato e bloccato}, + lockoutun => q{$_[0] Sbloccato}, + lockoutuse => q{sintassi: sh/lockout |ALL}, + loginu => q{L'utente $_[0] e' entrato nel cluster}, + logoutu => q{L'utente $_[0] e' uscito dal cluster}, + loginn => q{Il nodo $_[0] si e' connesso}, + logoutn => q{Il nodo $_[0] si e' disconnesso}, + m1 => q{Inserisci il Soggetto (30 caratteri):}, + m2 => q{Copia del messaggio $_[0] spedita a $_[1]}, + m3 => q{Spiacente, $_[0] non e' un destinatario accettabile}, + m4 => q{Spiacente, non posso accedere al messaggio $_[0]}, + m5 => q{Spiacente, ho bisogno del numero di un messaggio'}, + m6 => q{Rispondi a: $_[0]}, + m7 => q{Soggetto : $_[0]}, + m8 => q{Scrivi il messaggio e batti /EX per spedirlo o /ABORT per uscire}, + m9 => q{Nuovi messaggi sono arrivati per te}, + m10 => q{Messaggio abortito}, + m11 => q{Il messaggio $_[0] e' stato salvato e inviato a $_[1]}, + m12 => q{Il messaggio $_[0] e' stato cancellato}, + m13 => q{Il messaggio $_[0] non esiste}, + m14 => q{Il messaggio $_[0] e' stato marcato come spedito a $_[1]}, + m15 => q{Il messaggio $_[0] risolta ora non spedito a $_[1]}, + m16 => q{Specificare il numero del messaggio}, + m17 => q{Spiacente, impossibile spedire messaggi in modo $_[0]}, + msg1 => q{Bollettino messo in coda}, + msg2 => q{Messaggio messo in coda}, + msg3 => q{Msg $_[0]: $_[1] cambiato da $_[2] a $_[3]}, + msgu => q{sintassi: msg dati...}, + merge1 => q{Richiesta di merge per gli spot $_[1] e i WWV $_[2] spedita a $_[0]}, + moon => q{Localita gg/mm/aaaa Alba Tramonto}, + moon_with_azel => q{Località gg/mm/aaaa Alba Tramonto Azim Elev}, + mond => q{Monitor disabilitato}, + mone => q{Monitor abilitato}, + namee1 => q{Per favore inserisci con set/name }, + namee2 => q{Impossibile trovare l'utente $_[0]!}, + name => q{Il tuo nome ora e' "$_[0]"}, + nodea => q{$_[0] impostato come nodo stile AK1A}, + nodeac => q{$_[0] creato come nodo stile AK1A}, + nodeb => q{$_[0] impostato come BBS}, + nodebc => q{$_[0] creato come BBS}, + nodec => q{$_[0] impostato come nodo stile CLX}, + nodecc => q{$_[0] creato come nodo stile CLX}, + noder => q{$_[0] impostato come nodo stile AR-Cluster}, + noderc => q{$_[0] creato come nodo stile AR-Cluster}, + nodes => q{$_[0] impostato come nodo stile DXSpider}, + nodesc => q{$_[0] creato come nodo stile DXSpider}, + nodex => q{$_[0] impostato come nodo stile DXNET}, + nodexc => q{$_[0] creato come nodo stile DXNET}, + nodeu => q{$_[0] impostato come utente}, + nodee1 => q{Non puoi utilizzare questo comando mentre il destinatario ($_[0]) e' connesso}, + notdone => q{Non eseguito}, + nothere => q{Spiacente, ma $_[0] non e' presente al momento, prova più tardi'}, + obscount => q{Contatore di obsolescenza del ping per $_[0] impostato a $_[1]}, + ok => q{Operazione eseguita con successo}, + outconn => q{Connessione in corso per $_[0]}, + page => q{Premi Invio per continuare, A per annullare ($_[0] linee) >}, + pagelth => q{La lunghezza della pagina e' adesso $_[0]}, + passerr => q{sintassi: SET/PASS }, + password => q{Password impostata o cambiata per $_[0]}, + passwordu => q{Password rimossa per $_[0]}, + pingo => q{Ping mandato a $_[0]}, + pingi => q{Ping ritornato da $_[0] $_[1] (media $_[2]) secondi}, + pinge1 => q{Non puoi far un ping su te stesso!}, + pingint => q{Intervallo di ping per $_[0] impostato a $_[1] secondi}, + 'pos' => q{Dal nominativo: $_[0] Lat: $_[1] Long: $_[2]}, + priv => q{Privilegi cambiati per $_[0]}, + prs => q{Prompt impostato a "$_[0]"}, + pru => q{Prompt reimpostato al predefinito}, + prx => q{$main::mycall >}, + pw0 => q{Inserisci la vecchia password: }, + pw1 => q{Inserisci la nuova password: }, + pw2 => q{Reinserisci la nuova password: }, + pw3 => q{Password modificata}, + pw4 => q{Le password sono differenti, password NON cambiata}, + qll => q{Per favore inserisci la tua località con set/location o set/qra}, + qthe1 => q{Per favore inserisci il tuo QTH con set/qth }, + qth => q{Il tuo QTH e' adesso "$_[0]"}, + qrae1 => q{Per favore inserisci il tuo locatore QRA con set/qra (es set/qra JM77GF)}, + qrashe1 => q{Please enter a QRA locator, eg sh/qra JO02LQ or sh/qra JO02LQ IO93NS}, + qrae2 => q{Non riconosco "$_[0]" come locatore QRA (es JM77GF)}, + qra => q{Il tuo locatore QRA e' adesso "$_[0]"}, + rcmdo => q{RCMD "$_[0]" spedito a $_[1]}, + rec => q{$_[0] records}, + read1 => q{Spiacente, non ci sono nuovi messaggi per te}, + read2 => q{Messaggio $_[0] non trovato}, + read3 => q{Messaggio $_[0] non disponibile}, + rec => q{$_[0] records}, + reg => q{$_[0] registrato}, + regc => q{$_[0] creato e registrato}, + reginac => q{La registrazione non e' attiva (set/var \$main::reqreg = 1 per attivarla)}, + regun => q{$_[0] deregistrato}, + route => q{$_[0] su $_[1] via $_[2]}, + sat1 => q{Tracking Table for $_[0] for the next $_[1] hours every $_[2] mins}, + sat2 => q{dd/mm UTC Lat Lon Alt Km Az El Dist Km}, + sat3 => q{Sintassi: SH/SAT [ ]}, + sat4 => q{Satelliti disponibili/Età dei Kepleriani (giorni):-}, + sat5 => q{serve nnnnn.AMSAT nel soggetto per caricare i kepleriani dal messaggio}, + satnf => q{Satellite $_[0] sconosciuto}, + satdisc => q{-----}, + sethop1 => q{sintassi: set/hops ann|spots|wwv|wcy }, + sethop2 => q{$_[0] salti impostai per $_[1]$_[2] per $_[3]'}, + sethop3 => q{Nessun salto impostato per $_[0]'}, + shutting => q{$main::mycall si sta arrestando...}, + sloc => q{Cluster lat $_[0] long $_[1], Non scordare di camberli nel file DXVars.pm}, + snode1 => q{Nodo Nominativo Ordine Versione}, + snode2 => q{$_[0] $_[1] $_[2]}, + snode3 => q{$_[0] Nominativo sconosciuto}, + sqra => q{Locatore QRA del Cluster$_[0], NON DIMENTICARE DI CAMBIARLO NEL TUO FILE DXVars.pm}, + sorry => q{Spiacente}, + spf1 => q{spoof: sto creando il nuovo utente $_[0]}, + stathf => q{Statistiche HF DX Spot, ultimi 31 giorni}, + stathft => q{Statistiche HF DX Spot, ultimi 31 giorni per DXCC $_[0]}, + statvhf => q{Statistiche VHF+ DX Spot, ultimi 31 giorni}, + statvhft => q{Statistiche VHF+ DX Spot, ultimi 31 days per DXCC $_[0]}, + statdx => q{Totale DX Spots degli ultimi 31 giorni}, + sun => q{Località gg/mm/aaaa Alba Tramonto}, + sun_with_azel => q{Località gg/mm/aaaa Alba Tramonto Azim Elev}, - echoon => 'Echo abilitato', - echooff => 'Echo disabilitato', - echow => '*Echo e\' al momento disabilitato, usa set/echo per abilitarlo', - emaile1 => 'Per favore inserisci il tuo indirizzo email con: set/email ', - emaila => 'Il tuo indirizzo email e\' ora \"$_[0]\"', - email => 'Indirizzo email impostato a: $_[0]', - export1 => 'sintassi: export ', - export2 => '$_[3] ha problemi esportando i messaggi da $_[0] a $_[1] ($_[2])', - export3 => '$_[2 ] messaggi esportati da $_[0] a $_[1]', - filter1 => 'Filtro $_[0] aggiornato per $_[1]', - filter2 => 'Chiave sconosciuta per il filtro $_[0]', - filter3 => 'Nessun filtro definito per $_[0]', - filter4 => '$_[0]$_[1] Filtro $_[2] cancellato per $_[3]', - filter5 => 'necessito qualche comando per i filtri...', - filter6 => '$_[0]$_[1] Filtro per $[2] non trovato', - grids => 'DX Grid attivato alle $_[0]', - gridu => 'DX Grid disattivato alle $_[0]', - illcall => 'Spiacente, $_[0] non e\' un nominativo valido', - hasha => '$_[0] già esiste $_[1]', - hashb => '$_[0] aggiunto a $_[1]', - hashc => '$_[0] rimosso da $_[1]', - hashd => '$_[0] non in $_[1]', - hashe => '$_[0] impostato a $_[1]', - helpe1 => 'Aiuto non disponibile, contatta il sysop', - helpe2 => 'Nessun aiuto per $_[0]', - heres => 'Here abilitato per $_[0]', - heade1 => 'Sto usando le coordinate $main::mycall, e\' preferibile impostarle con set/location o set/qra', - hereu => 'Here disattivato per $_[0]', - homebbs => 'Home BBS impostata a: $_[0]', - homenode => 'Home Node impostato a: $_[0]', - hnodee1 => 'Per piacere imposta il tuo Home Node con set/homenode ', - hnodee2 => 'Impostazione dell\'homenode fallita per $_[0]', - hnode => 'Il tuo Homenode e\' adesso \"$_[0]\"', - init1 => 'inizializzaione inviata a $_[0]', - iso => '$_[0] Isolato', - isou => '$_[0] non Isolato', - isoc => '$_[0] creato ed isolato', - isoari => 'c\'e\' una filtro sulla rotta in ingresso per $_[0]; eliminala con clear/route input $_[0] prima', - isoaro => 'c\'e\' una filtro sulla rotta in uscita per $_[0]; eliminala con clear/route $_[0] prima', - isow => '$_[0] e\' isolato; unset/isolate $_[0] prima', - l1 => 'Spiacente $_[0], sei già collegato sun un altro canale', - l2 => 'Benvenuto $_[0] sul Cluster $main::mycall a $main::myqth\nsoftware in uso DXSpider V$main::version build $main::build', - lang => 'La lingua selezionata e\' adesso Italiano', - lange1 => 'set/language dove e\' una tra ($_[0])', - lange2 => 'impostazione lingua fallita per $_[0]', - lh1 => '$main::data/hop_table.pl non esiste', - loce1 => 'Per piacere inserisci la tua posizione, set/location ', - loce2 => 'Non riconosco \"$_[0]\" come Lat/Long (es 52 20 N 0 16 E)', - loce3 => '$_[0] e\' una locatore QRA, usa: set/qra $_[0]', - loc => 'I tuoi dati Lat/Long sono ora \"$_[0]\"', - lockout => '$_[0] Bloccato', - lockoutc => '$_[0] Creato e bloccato', - lockoutun => '$_[0] Sbloccato', - lockoutuse => 'sintassi: sh/lockout |ALL', - loginu => 'L\'utente $_[0] e\' entrato nel cluster', - logoutu => 'L\'utente $_[0] e\' uscito dal cluster', - loginn => 'Il nodo $_[0] si e\' connesso', - logoutn => 'Il nodo $_[0] si e\' disconnesso', - m1 => 'Inserisci il Soggetto (30 caratteri):', - m2 => 'Copia del messaggio $_[0] spedita a $_[1]', - m3 => 'Spiacente, $_[0] non e\' un destinatario accettabile', - m4 => 'Spiacente, non posso accedere al messaggio $_[0]', - m5 => 'Spiacente, ho bisogno del numero di un messaggio', - m6 => 'Rispondi a: $_[0]', - m7 => 'Soggetto : $_[0]', - m8 => 'Scrivi il messaggio e batti /EX per spedirlo o /ABORT per uscire', - m9 => 'Nuovi messaggi sono arrivati per te', - m10 => 'Messaggio abortito', - m11 => 'Il messaggio $_[0] e\' stato salvato e inviato a $_[1]', - m12 => 'Il messaggio $_[0] e\' stato cancellato', - m13 => 'Il messaggio $_[0] non esiste', - m14 => 'Il messaggio $_[0] e\' stato marcato come spedito a $_[1]', - m15 => 'Il messaggio $_[0] risolta ora non spedito a $_[1]', - m16 => 'Specificare il numero del messaggio', - m17 => 'Spiacente, impossibile spedire messaggi in modo $_[0]', - msg1 => 'Bollettino messo in coda', - msg2 => 'Messaggio messo in coda', - msg3 => 'Msg $_[0]: $_[1] cambiato da $_[2] a $_[3]', - msgu => 'sintassi: msg dati...', - merge1 => 'Richiesta di merge per gli spot $_[1] e i WWV $_[2] spedita a $_[0]', - moon => 'Localita gg/mm/aaaa Alba Tramonto', - moon_with_azel => 'Località - gg/mm/aaaa Alba Tramonto Azim Elev', - mond => 'Monitor disabilitato', - mone => 'Monitor abilitato', - namee1 => 'Per favore inserisci con set/name ', - namee2 => 'Impossibile trovare l\'utente $_[0]!', - name => 'Il tuo nome ora e\' \"$_[0]\"', - nodea => '$_[0] impostato come nodo stile AK1A', - nodeac => '$_[0] creato come nodo stile AK1A', - nodeb => '$_[0] impostato come BBS', - nodebc => '$_[0] creato come BBS', - nodec => '$_[0] impostato come nodo stile CLX', - nodecc => '$_[0] creato come nodo stile CLX', - noder => '$_[0] impostato come nodo stile AR-Cluster', - noderc => '$_[0] creato come nodo stile AR-Cluster', - nodes => '$_[0] impostato come nodo stile DXSpider', - nodesc => '$_[0] creato come nodo stile DXSpider', - nodex => '$_[0] impostato come nodo stile DXNET', - nodexc => '$_[0] creato come nodo stile DXNET', - nodeu => '$_[0] impostato come utente', - nodee1 => 'Non puoi utilizzare questo comando mentre il destinatario ($_[0]) e\' connesso', - notdone => 'Non eseguito', - nothere => 'Spiacente, ma $_[0] non e\' presente al momento, prova più tardi', - obscount => 'Contatore di obsolescenza del ping per $_[0] impostato a $_[1]', - ok => 'Operazione eseguita con successo', - outconn => 'Connessione in corso per $_[0]', - page => 'Premi Invio per continuare, A per annullare ($_[0] linee) >', - pagelth => 'La lunghezza della pagina e\' adesso $_[0]', - passerr => 'sintassi: SET/PASS ', - password => 'Password impostata o cambiata per $_[0]', - passwordu => 'Password rimossa per $_[0]', - pingo => 'Ping mandato a $_[0]', - pingi => 'Ping ritornato da $_[0] $_[1] (media $_[2]) secondi', - pinge1 => 'Non puoi far un ping su te stesso!', - pingint => 'Intervallo di ping per $_[0] impostato a $_[1] secondi', - 'pos' => 'Dal nominativo: $_[0] Lat: $_[1] Long: $_[2]', - priv => 'Privilegi cambiati per $_[0]', - prs => 'Prompt impostato a \"$_[0]\"', - pru => 'Prompt reimpostato al predefinito', - prx => '$main::mycall >', - pw0 => 'Inserisci la vecchia password: ', - pw1 => 'Inserisci la nuova password: ', - pw2 => 'Reinserisci la nuova password: ', - pw3 => 'Password modificata', - pw4 => 'Le password sono differenti, password NON cambiata', - qll => 'Per favore inserisci la tua località con set/location o set/qra', - qthe1 => 'Per favore inserisci il tuo QTH con set/qth ', - qth => 'Il tuo QTH e\' adesso \"$_[0]\"', - qrae1 => 'Per favore inserisci il tuo locatore QRA con set/qra (es set/qra JM77GF)', - qrashe1 => 'Please enter a QRA locator, eg sh/qra JO02LQ or sh/qra JO02LQ IO93NS', - qrae2 => 'Non riconosco \"$_[0]\" come locatore QRA (es JM77GF)', - qra => 'Il tuo locatore QRA e\' adesso \"$_[0]\"', - rcmdo => 'RCMD \"$_[0]\" spedito a $_[1]', - rec => '$_[0] records', - read1 => 'Spiacente, non ci sono nuovi messaggi per te', - read2 => 'Messaggio $_[0] non trovato', - read3 => 'Messaggio $_[0] non disponibile', - rec => '$_[0] records', - reg => '$_[0] registrato', - regc => '$_[0] creato e registrato', - reginac => 'La registrazione non e\' attiva (set/var \$main::reqreg = 1 per attivarla)', - regun => '$_[0] deregistrato', - route => '$_[0] su $_[1] via $_[2]', - sat1 => 'Tracking Table for $_[0] for the next $_[1] hours every $_[2] mins', - sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km', - sat3 => 'Sintassi: SH/SAT [ ]', - sat4 => 'Satelliti disponibili/Età dei Kepleriani (giorni):-', - sat5 => 'serve nnnnn.AMSAT nel soggetto per caricare i kepleriani dal messaggio', - satnf => 'Satellite $_[0] sconosciuto', - satdisc => '-----', - sethop1 => 'sintassi: set/hops ann|spots|wwv|wcy ', - sethop2 => '$_[0] salti impostai per $_[1]$_[2] per $_[3]', - sethop3 => 'Nessun salto impostato per $_[0]', - shutting => '$main::mycall si sta arrestando...', - sloc => 'Cluster lat $_[0] long $_[1], Non scordare di camberli nel file DXVars.pm', - snode1 => 'Nodo Nominativo Ordine Versione', - snode2 => '$_[0] $_[1] $_[2]', - snode3 => '$_[0] Nominativo sconosciuto', - sqra => 'Locatore QRA del Cluster$_[0], NON DIMENTICARE DI CAMBIARLO NEL TUO FILE DXVars.pm', - sorry => 'Spiacente', - spf1 => 'spoof: sto creando il nuovo utente $_[0]', - stathf => 'Statistiche HF DX Spot, ultimi 31 giorni', - stathft => 'Statistiche HF DX Spot, ultimi 31 giorni per DXCC $_[0]', - statvhf => 'Statistiche VHF+ DX Spot, ultimi 31 giorni', - statvhft => 'Statistiche VHF+ DX Spot, ultimi 31 days per DXCC $_[0]', - statdx => 'Totale DX Spots degli ultimi 31 giorni', - sun => 'Località gg/mm/aaaa Alba Tramonto', - sun_with_azel => 'Località - gg/mm/aaaa Alba Tramonto Azim Elev', + suser1 => q{sintassi: nominatio campo_utente valore}, + suser2 => q{Utente $_[0] non trovato}, + suser3 => q{Il campo utente '$_[0]' era '$_[1]' ora e' impostao a '$_[2]'}, + suser4 => q{Il campo utente '$_[0]' non esiste}, + time1 => q{Ora locale: $_[0] $_[1], UTC $_[2]}, + time2 => q{$_[0] Ora (standard) locale: $_[1] ($_[2] ore)}, + time3 => q{$_[0] $_[1]}, + talks => q{Talk abilitato per $_[0]}, + talku => q{Talk disabilitato per $_[0]}, + talkend => q{Chiude il la conversazione con te}, + talkinst => q{Stai entrando nel modo conversazione, /EX per uscire, / per eseguire un comando}, + talknh => q{Spiaente $_[0] non e' collegato al momento}, + talkprompt => q{Talk ($_[0])>}, + talkstart => q{Inizia una conversazione con te}, + unsethop1 => q{sintassi: unset/hops ann|spots|wwv|wcy}, + unsethop2 => q{salti eliminati su $_[1] per $_[0]}, + usernf => q{*** Record utente per $_[0] non trovato ***}, + wcy1 => q{$_[0] manca o e' fuori limite}, + wcy2 => q{WCY duplicato}, + wwv1 => q{$_[0] manca o e' fuori limite}, + wwv2 => q{WWV duplicato}, + wwvs => q{WWV abilitati per $_[0]}, + wwvu => q{WWV disabilitati per $_[0]}, + wxs => q{WX abilitati per $_[0]}, + wxu => q{WX disabilitati per $_[0]}, + }, - suser1 => 'sintassi: nominatio campo_utente valore', - suser2 => 'Utente $_[0] non trovato', - suser3 => 'Il campo utente \'$_[0]\' era \'$_[1]\' ora e\' impostao a \'$_[2]\'', - suser4 => 'Il campo utente \'$_[0]\' non esiste', - time1 => 'Ora locale: $_[0] $_[1], UTC $_[2]', - time2 => '$_[0] Ora (standard) locale: $_[1] ($_[2] ore)', - time3 => '$_[0] $_[1]', - talks => 'Talk abilitato per $_[0]', - talku => 'Talk disabilitato per $_[0]', - talkend => 'Chiude il la conversazione con te', - talkinst => 'Stai entrando nel modo conversazione, /EX per uscire, / per eseguire un comando', - talknh => 'Spiaente $_[0] non e\' collegato al momento', - talkprompt => 'Talk ($_[0])>', - talkstart => 'Inizia una conversazione con te', - unsethop1 => 'sintassi: unset/hops ann|spots|wwv|wcy', - unsethop2 => 'salti eliminati su $_[1] per $_[0]', - usernf => '*** Record utente per $_[0] non trovato ***', - wcy1 => '$_[0] manca o e\' fuori limite', - wcy2 => 'WCY duplicato', - wwv1 => '$_[0] manca o e\' fuori limite', - wwv2 => 'WWV duplicato', - wwvs => 'WWV abilitati per $_[0]', - wwvu => 'WWV disabilitati per $_[0]', - wxs => 'WX abilitati per $_[0]', - wxu => 'WX disabilitati per $_[0]', - }, - cz => { - addr => 'Adresa nastavena na: $_[0]', - already => '$_[0] je uz pripojen', - anns => 'Ann je povolen pro $_[0]', - annu => 'Ann je zakazan pro $_[0]', - annts => 'AnnTalk je povolen pro $_[0]', - anntu => 'AnnTalk je zakazan pro $_[0]', - badnode1 => '$_[0] je nyni zavadny nod', - badnode2 => '$_[0] je nyni bezvadny nod', - badnode3 => 'Seznam zavadnych nodu:-', - bbse1 => 'Prosim zadej svou BBS adresu, set/bbs ', - bbs => 'Tva BBS adresa je nyni \"$_[0]\"', - beepoff => 'Zvuky jsou nyni vypnuty', - beepon => 'Zvuky jsou nyni zapnuty', - call1 => 'Vyhledani znacky pres $_[0]:', - conother => 'Lituji $_[0], jses na me napojen na jinem portu', - concluster => 'Lituji $_[0], jses uz napojen nekde jinde na clusteru (na $_[1])', - conscript => 'nebyl spusten connect skript \"$_[0]\" nalezen v $main::root/connect', - confail => 'pripojeni na $_[0] selhalo ($_[1])', - constart => 'pripojeni na $_[0] bylo zahajeno', - deluser => 'Uzivatel $_[0] byl smazan', - db1 => 'Tato databaze se nachazi na $_[0]', - db2 => 'Lituji, ale klic $_[0] nebyl nalezen v $_[1]', - db3 => 'Lituji, ale databaze $_[0] se zde nenachazi', - db4 => 'Lituji, databaze $_[0] na $_[1] neni momentalne online', - db5 => 'Pripojuji vzdalenou databazi na $_[0]...cekej...', - db6 => 'Databaze $_[0] uz existuje, nejprve ji smaz', - db7 => 'Databaze $_[0] byla vytvorena pro vzdaleny nod $_[1]', - db8 => 'Databaze $_[0] byla vytvorena lokalne', - db9 => 'Databaze $_[0] byla smazana', - db10 => '$_[0] zaznamu bylo vlozeno do $_[1]', - db11 => 'Posilam tvuj pozadavek do $_[0], prosim cekej...', - dfreq1 => 'Neplatna freq $_[0], potrebuji napr 0/30000 nebo hf nebo hf/cw', - dir1 => 'Zadne zpravy nebyly nalezeny', - disc1 => 'Odpojeno uzivatelem $_[0]', - disc2 => 'Kanal $_[0] odpojen', - disc3 => 'Zadny kanal, ale spojeni $_[0] zruseno', - disc4 => 'Zadny kanal ani spojeni, ale $_[0] byl odpojen', - done => 'Hotovo', - dup => 'Lituji, toto je duplikat', - dx1 => 'Frekvence $_[0] neni uvnitr pasma (viz show/band); pouziti: DX [BY call] freq call text', - dx2 => 'Potrebuji znacku; pouziti: DX [BY call] freq call text', - dx3 => 'Znacka nebo frekvence je neplatna', - dxs => 'DX spoty jsou povoleny pro $_[0]', - dxu => 'DX spoty jsou zakazany pro $_[0]', - e1 => 'Neplatny prikaz', - e2 => 'Chyba: $_[0]', - e3 => '$_[0]: $_[1] nebylo nalezeno', - e4 => 'Potrebuji alespon prefix nebo znacku', - e5 => 'Neni povoleno', - e6 => '*** Zadna stanice specifikovana ***', - e7 => 'znacka $_[0] neni v clusteru viditelna', - e8 => 'Potrebuji znacku a nejaky text', - e9 => 'Potrebuji alespon nejaky text', - e10 => 'Stanice $_[0] neni pripojena lokalne', - e11 => 'Nemohu pouzit $main:mycall jako cil', - e12 => 'Potrebuji znacku nodu', - e13 => '$_[0] neni nod', - e14 => 'Prvni argument musi byt cislo vetsi nez 0', - e15 => 'neplatny parametr \"$_[0]\"', - e16 => 'Soubor \"$_[0]\" uz existuje', - e17 => 'Prosim nepouzivej zde toto slovo: @_', - e18 => 'Nemohu se pripojit na $_[0] ($!)', - e19 => 'neplatny znak v radku $_[0]', - e20 => 'retezec $_0] nebyl rozpoznan', - e21 => '$_[0] neni cislo', - e22 => '$_[0] neni znacka', - e23 => '$_[0] neni v rozsahu (napr 0/30000)', - e24 => 'Lituji, pristup na internet neni povolen', - e25 => 'Lituji, hodnota musi byt mezi $_[0] a $_[1]', - e26 => 'Prilis mnoho chyb najednou, jsi odpojovan', - e27 => '$_[0] neni cislo nebo prefix', - e28 => 'Lituji, musis byt registrovan (SP $main::myalias k registraci)', - e29 => 'Potrebuji heslo', - e30 => 'Nemohu otevrit $_[0] $!', - e31 => '$_[0] neni uzivatel', - e32 => 'Potrebuji frazi', - e33 => '$_[0] neni pocet dnu nebo platne datum', + cz => { + addr => q{Adresa nastavena na: $_[0]}, + already => q{$_[0] je uz pripojen}, + anns => q{Ann je povolen pro $_[0]}, + annu => q{Ann je zakazan pro $_[0]}, + annts => q{AnnTalk je povolen pro $_[0]}, + anntu => q{AnnTalk je zakazan pro $_[0]}, + badnode1 => q{$_[0] je nyni zavadny nod}, + badnode2 => q{$_[0] je nyni bezvadny nod}, + badnode3 => q{Seznam zavadnych nodu:-}, + bbse1 => q{Prosim zadej svou BBS adresu, set/bbs }, + bbs => q{Tva BBS adresa je nyni "$_[0]"}, + beepoff => q{Zvuky jsou nyni vypnuty}, + beepon => q{Zvuky jsou nyni zapnuty}, + call1 => q{Vyhledani znacky pres $_[0]:}, + conother => q{Lituji $_[0], jses na me napojen na jinem portu}, + concluster => q{Lituji $_[0], jses uz napojen nekde jinde na clusteru (na $_[1])}, + conscript => q{nebyl spusten connect skript "$_[0]" nalezen v $main::root/connect}, + confail => q{pripojeni na $_[0] selhalo ($_[1])}, + constart => q{pripojeni na $_[0] bylo zahajeno}, + deluser => q{Uzivatel $_[0] byl smazan}, + db1 => q{Tato databaze se nachazi na $_[0]}, + db2 => q{Lituji, ale klic $_[0] nebyl nalezen v $_[1]}, + db3 => q{Lituji, ale databaze $_[0] se zde nenachazi}, + db4 => q{Lituji, databaze $_[0] na $_[1] neni momentalne online}, + db5 => q{Pripojuji vzdalenou databazi na $_[0]...cekej...}, + db6 => q{Databaze $_[0] uz existuje, nejprve ji smaz}, + db7 => q{Databaze $_[0] byla vytvorena pro vzdaleny nod $_[1]}, + db8 => q{Databaze $_[0] byla vytvorena lokalne}, + db9 => q{Databaze $_[0] byla smazana}, + db10 => q{$_[0] zaznamu bylo vlozeno do $_[1]}, + db11 => q{Posilam tvuj pozadavek do $_[0], prosim cekej...}, + dfreq1 => q{Neplatna freq $_[0], potrebuji napr 0/30000 nebo hf nebo hf/cw'}, + dir1 => q{Zadne zpravy nebyly nalezeny}, + disc1 => q{Odpojeno uzivatelem $_[0]}, + disc2 => q{Kanal $_[0] odpojen}, + disc3 => q{Zadny kanal, ale spojeni $_[0] zruseno}, + disc4 => q{Zadny kanal ani spojeni, ale $_[0] byl odpojen}, + done => q{Hotovo}, + dup => q{Lituji, toto je duplikat}, + dx1 => q{Frekvence $_[0] neni uvnitr pasma (viz show/band); pouziti: DX [BY call] freq call text}, + dx2 => q{Potrebuji znacku; pouziti: DX [BY call] freq call text}, + dx3 => q{Znacka nebo frekvence je neplatna}, + dxs => q{DX spoty jsou povoleny pro $_[0]}, + dxu => q{DX spoty jsou zakazany pro $_[0]}, + e1 => q{Neplatny prikaz}, + e2 => q{Chyba: $_[0]}, + e3 => q{$_[0]: $_[1] nebylo nalezeno}, + e4 => q{Potrebuji alespon prefix nebo znacku}, + e5 => q{Neni povoleno}, + e6 => q{*** Zadna stanice specifikovana ***}, + e7 => q{znacka $_[0] neni v clusteru viditelna}, + e8 => q{Potrebuji znacku a nejaky text}, + e9 => q{Potrebuji alespon nejaky text}, + e10 => q{Stanice $_[0] neni pripojena lokalne}, + e11 => q{Nemohu pouzit $main:mycall jako cil}, + e12 => q{Potrebuji znacku nodu}, + e13 => q{$_[0] neni nod}, + e14 => q{Prvni argument musi byt cislo vetsi nez 0}, + e15 => q{neplatny parametr "$_[0]"}, + e16 => q{Soubor "$_[0]" uz existuje}, + e17 => q{Prosim nepouzivej zde toto slovo: @_'}, + e18 => q{Nemohu se pripojit na $_[0] ($!)}, + e19 => q{neplatny znak v radku $_[0]}, + e20 => q{retezec $_0] nebyl rozpoznan}, + e21 => q{$_[0] neni cislo}, + e22 => q{$_[0] neni znacka}, + e23 => q{$_[0] neni v rozsahu (napr 0/30000)'}, + e24 => q{Lituji, pristup na internet neni povolen}, + e25 => q{Lituji, hodnota musi byt mezi $_[0] a $_[1]}, + e26 => q{Prilis mnoho chyb najednou, jsi odpojovan}, + e27 => q{$_[0] neni cislo nebo prefix'}, + e28 => q{Lituji, musis byt registrovan (SP $main::myalias k registraci)}, + e29 => q{Potrebuji heslo}, + e30 => q{Nemohu otevrit $_[0] $!}, + e31 => q{$_[0] neni uzivatel'}, + e32 => q{Potrebuji frazi}, + e33 => q{$_[0] neni pocet dnu nebo platne datum}, - echoon => 'Echo povoleno', - echooff => 'Echo zakazano', - echow => '*Echo je momentalne zakazano, pouzij set/echo k povoleni', - emaile1 => 'Prosim zadej svou e-mailovou adresu, set/email ', - emaila => 'Tva e-mailova adresa je nyni \"$_[0]\"', - email => 'E-mailova adresa je nastavena na: $_[0]', - export1 => 'pouziti: export ', - export2 => '$_[3] hlasi chyby pri exportu zpravy $_[0] do $_[1] ($_[2])', - export3 => '$_[2 ] exportoval zpravu $_[0] to $_[1]', - filter1 => 'Filtr $_[0] byl zmenen pro for $_[1]', - filter2 => 'Neznamy prikaz filtru $_[0]', - filter3 => 'Nejsou zadne definovane filtry pro $_[0]', - filter4 => '$_[0]$_[1] Filtr $_[2] smazan pro $_[3]', - filter5 => 'potrebuji nejake prikazy filtru...', - filter6 => '$_[0]$_[1] Filtr pro $[2] nebyl nalezen', - grids => 'QRA ctverec byl povolen pro $_[0]', - gridu => 'QRA ctverec byl zakazan pro $_[0]', - illcall => 'Lituji, $_[0] neni platna znacka', - hasha => '$_[0] uz existuje v $_[1]', - hashb => '$_[0] byl pridan do $_[1]', - hashc => '$_[0] byl odstranen z $_[1]', - hashd => '$_[0] neni v $_[1]', - hashe => '$_[0] byl nastaven v $_[1]', - helpe1 => 'Systemova napoveda neni k dispozici, informuj sysopa', - helpe2 => 'Napoveda neni k dispozici k $_[0]', - heres => '$_[0] je pritomen', - heade1 => 'S pouzitim souradnic clusteru, doporucuji zadat set/location nebo set/qra', - hereu => '$_[0] neni pritomen', - homebbs => 'Domaci BBS je nastavena na: $_[0]', - homenode => 'Domaci DXC nod je nastaven na: $_[0]', - hnodee1 => 'Prosim zadej svuj domaci DXC nod, set/homenode ', - hnodee2 => 'Nastaveni domaciho nodu na $_[0] selhalo', - hnode => 'Tvuj domaci nod je nyni \"$_[0]\"', - init1 => 'vyslana inicializacni zprava do $_[0]', - iso => '$_[0] izolovan', - isou => '$_[0] neni izolovan', - isoc => '$_[0] vytvoren a izolovan', - isoari => 'vstupni route filtr pro $_[0] uz existuje; zadej nejprve clear/route input $_[0]', - isoaro => 'vystupni route filtr pro $_[0] uz existuje; zadej nejprve clear/route $_[0]', - isow => '$_[0] je izolovan; zadej nejprve unset/isolate $_[0]', - l1 => 'Lituji $_[0], uz jsi zalogovan na jinem kanalu', - l2 => 'Ahoj $_[0], toto je $main::mycall, $main::myqth\npouzivajici DXSpider V$main::version build $main::build', - lang => 'Jazyk je nyni nastaven na Cestinu (napoveda zatim v procesu)', - lange1 => 'set/language kde je jedno z ($_[0])', - lange2 => 'selhalo nastaveni jazyka na $_[0]', - lh1 => '$main::data/hop_table.pl neexistuje', - loce1 => 'Prosim zadej svou polohu, set/location ', - loce2 => 'Nemohu rozpoznat \"$_[0]\" jako sirka/delka (napr 52 20 N 0 16 E)', - loce3 => '$_[0] je QRA lokator, prosim pouzij: set/qra $_[0]', - loc => 'Tva poloha (sirka/delka) je nyni \"$_[0]\"', - lockout => '$_[0] zamknuto', - lockoutc => '$_[0] vytvoreno a zamknuto', - lockoutun => '$_[0] Odemceno', - lockoutuse => 'pouziti: sh/lockout |ALL', - loginu => 'Uzivatel $_[0] prihlasen', - logoutu => 'Uzivatel $_[0] odhlasen', - loginn => 'Nod $_[0] prihlasen', - logoutn => 'Nod $_[0] odhlasen', - m1 => 'Zadej nazev (30 znaku):', - m2 => 'Kopie zpravy $_[0] byla odeslana k $_[1]', - m3 => 'Lituji, $_[0] je neplatna cilova adresa', - m4 => 'Lituji, zprava $_[0] neni dostupna', - m5 => 'Lituji, potrebuji cislo zpravy', - m6 => 'Odpoved na: $_[0]', - m7 => 'Nezev: $_[0]', - m8 => 'Zadej text zpravy /EX pro konec nebo /ABORT k preruseni', - m9 => 'Mas novou zpravu', - m10 => 'Zprava prerusena', - m11 => 'Zprava c. $_[0] ulozena a smerovana na $_[1]', - m12 => 'Zprava c. $_[0] byla smazana', - m13 => 'Zprava c. $_[0] chybi', - m14 => 'Zprava c. $_[0] byla oznacena a zaslana do $_[1]', - m15 => 'Zprava c. $_[0] byla neoznacena a zaslana do $_[1]', - m16 => 'Potrebuji cislo zpravy', - m17 => 'Lituji, nemohu posilat zpravy v modu $_[0]', - m18 => 'Lituji, zprava $_[0] ma momentalne status KEEP', - msg1 => 'Zpravy v rubrikach cekaji ve fronte', - msg2 => 'Privatni zpravy cekaji ve fronte', - msg3 => 'Zprava $_[0]: $_[1] byla zmenena z $_[2] na $_[3]', - msgu => 'pouziti: msg data...', - merge1 => 'Pozadavek na Merge pro $_[1] spotu a $_[2] WWV byl zaslan do $_[0]', - moon => 'Poloha dd/mm/yyyy Vychod Zapad', - moon_with_azel => 'Poloha dd/mm/yyyy Vychod Zapad Azim Elev', - mond => 'Monitoring je zakazan', - mone => 'Monitoring je povolen', - namee1 => 'Prosim zadej sve jmeno, set/name ', - namee2 => 'Nemohu najit uzivatele $_[0]!', - name => 'Tve jmeno je nyni \"$_[0]\"', - nodea => '$_[0] nastaven jako nod typu AK1A', - nodeac => '$_[0] vytvoren jako nod typu AK1A', - nodeb => '$_[0] nastaven jako BBS', - nodebc => '$_[0] vytvoren jako BBS', - nodec => '$_[0] nastaven jako nod typu CLX', - nodecc => '$_[0] vytvoren jako nod typu CLX', - noder => '$_[0] nastaven jako nod typu AR-Cluster', - noderc => '$_[0] vytvoren jako nod typu AR-Cluster', - nodes => '$_[0] nastaven jako nod typu DXSpider', - nodesc => '$_[0] vytvoren jako nod typu DXSpider', - nodex => '$_[0] nastaven jako nod typu DXNET', - nodexc => '$_[0] vytvoren jako nod typu DXNET', - nodeu => '$_[0] nastaven opet jako uzivatel', - nodee1 => 'Nemuzes pouzit tento prikaz zatimco tvuj cil ($_[0]) je on-line', - notdone => 'NEBYLO provedeno', - nothere => 'Lituji, ale $_[0] neni momentalne zde, zkus to pozdeji', - obscount => 'Pocatecni hodnota Ping citace nodu $_[0] byla nastavena na $_[1]', - ok => 'Operace byla uspesna', - outconn => 'Zbyvajici spojeni na $_[0]', - page => 'Stiskni Enter pro pokracovani, A k preruseni ($_[0] radku) >', - pagelth => 'Delka stranky je nyni $_[0]', - passerr => 'Prosim pouzij: SET/PASS ', - passphrase => 'Fraze byla nastavena nebo zmenena pro $_[0]', - passphraseu => 'Fraze byla odstranena pro $_[0]', - password => 'Heslo bylo nastaveno nebo zmeneno pro $_[0]', - passwordu => 'Heslo bylo odstraneno pro $_[0]', - pc90s => 'PC90 bylo povoleno pro $_[0]', - pc90u => 'PC90 bylo zakazano $_[0]', - pingo => 'Ping byl zaslan na $_[0]', - pingi => 'Ping se vratil od $_[0] $_[1] (Prum $_[2]) sekundy', - pinge1 => 'Nemuzu pingnout sam sebe!', - pingint => 'Ping interval na $_[0] byl nastaven na $_[1] sekundy', - 'pos' => 'Od znacky: $_[0] Sirka: $_[1] Delka: $_[2]', - pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >', - prs => 'Prompt byl nastaven na \"$_[0]\"', - pru => 'Prompt byl vracen na default', - priv => 'Uroven prav byla zmenena na $_[0]', - prx => '$main::mycall >', - pw0 => 'Zadej stare heslo: ', - pw1 => 'Zadej nove heslo: ', - pw2 => 'Zadej znovu nove heslo: ', - pw3 => 'Heslo bylo zmeneno', - pw4 => 'Hesla se lisi, heslo NEBYLO zmeneno', - qll => 'Prpsim zadej svou polohu s pomoci set/location nebo set/qra', - qthe1 => 'Prosim zadej sve QTH, set/qth ', - qth => 'Tve QTH je nyni \"$_[0]\"', - qrae1 => 'Prosim zadej svuj QRA lokator, set/qra (napr set/qra JN79FM)', - qrashe1 => 'Prosim zadej QRA locator, napr sh/qra JN79FM nebo sh/qra JN79FM JN63GV', - qrae2 => 'Nerozpoznal jsem \"$_[0]\" jako QRA lokator (napr JN79FM)', - qra => 'Tvuj QRA lokator je nyni \"$_[0]\"', - rcmdo => 'RCMD \"$_[0]\" bylo zaslano do $_[1]', - read1 => 'Lituji, nemas zadne nove zpravy', - read2 => 'Zprava $_[0] nenalezena', - read3 => 'Msg $_[0] neni k dispozici', - rec => '$_[0] zaznamu', - reg => '$_[0] registrovano', - regc => '$_[0] vytvoreno a registrovano', - reginac => 'Registrace neni aktivni (set/var \$main::reqreg = 1 k aktivaci)', - regun => '$_[0] neregistrovano', - route => '$_[0] na $_[1] via $_[2]', - sat1 => 'Tabulka pro $_[0] pro nasledujicich $_[1] hodin s intervalem $_[2] min', - sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Vzdal Km', - sat3 => 'Syntaxe: SH/SAT [ ]', - sat4 => 'Druzice k dispozici/Stari Kepl. elem (dny):-', - sat5 => 'potrebuji nnnnn.AMSAT v nazvu ke stazeni keps z teto zpravy', - satnf => 'Druzice $_[0] je neznama', - satdisc => '-----', - set => '$_[0] povoleno pro $_[1]', - sethop1 => 'pouziti: set/hops ann|spots|wwv|wcy ', - sethop2 => '$_[0] skoku nastaveno na $_[1]$_[2] pro $_[3]', - sethop3 => 'Zadny pocet skoku nastaven pro $_[0]', - shu => '\"SHU\" nestaci, je treba alespon \"SHUT\" k vypnuti nodu', - shutting => '$main::mycall se vypina...', - sloc => 'Cluster lat $_[0] long $_[1], NEZAPOMEN ZMENIT DXVars.pm', - snode1 => 'Nod Znacka Typ Verze ', - snode2 => '$_[0] $_[1] $_[2]', - snode3 => '$_[0] Neznama znacka', - sqra => 'Cluster QRA Lokator$_[0], NEZAPOMEN ZMENIT DXVars.pm', - sorry => 'Lituji', - spf1 => 'spoof: vytvarim noveho uzivatele $_[0]', - stathf => 'HF DX Spot Stats, poslednich $_[1] dni pocinaje $_[0]', - stathft => 'HF DX Spot Stats, poslednich $_[2] dni pocinaje $_[1] pro DXCC $_[0]', - statvhf => 'VHF+ DX Spot Stats, poslednich $_[1] dni pocinaje $_[0]', - statvhft => 'VHF+ DX Spot Stats, poslednich $_[2] dni pocinaje $_[1] pro DXCC $_[0]', - statdx => 'Prehled DX Spotu pro $_[1] dni pocinaje $_[0]', - sun => 'Poloha dd/mm/yyyy Vychod Zapad', - sun_with_azel => 'Poloha dd/mm/yyyy Vychod Zapad Azim Elev', - susdb1 => 'pouziti: znacka stat mesto', - susdb2 => 'USDB $_[0] bylo $_[1], $_[2]', - susdb3 => 'USDB $_[0] je nyni $_[1], $_[2]', - susdb4 => 'USDB $_[0] smazano', - suser1 => 'pouziti: znacka jmeno_uzivatele hodnota', - suser2 => 'User $_[0] nebylo nalezeno', - suser3 => 'User field \'$_[0]\' bylo \'$_[1]\' nyni nastaveno na \'$_[2]\'', - suser4 => 'Jmeno uzivatele \'$_[0]\' neexistuje', - time1 => 'Lokalni cas: $_[0] $_[1], UTC $_[2]', - time2 => '$_[0] Lokalni (standardni) cas: $_[1] ($_[2] hodin)', - time3 => '$_[0] $_[1]', - talks => 'Talk povolen pro $_[0]', - talku => 'Talk zakazan pro $_[0]', - talkend => 'Skoncil spolecnou konverzaci', - talkinst => 'Vstupuji do konverzacniho modu, /EX pro skonceni, / ke spusteni prikazu', - talknh => 'Lituji, $_[0] neni momentalne online', - talkprompt => 'Talk ($_[0])>', - talkstart => 'Zahajil spolecnou konverzaci', - unset => '$_[0] zakazano pro for $_[1]', - unsethop1 => 'pouziti: unset/hops ann|spots|wwv|wcy', - unsethop2 => 'pocet skoku neni nastaven na $_[1] pro $_[0]', - usernf => '*** Uzivatelsky zaznam pro $_[0] nebyl nalezen ***', - wcy1 => '$_[0] bud chybi nebo je mimo rozsah', - wcy2 => 'Duplicitni WCY', - wcys => 'WCY je povoleno pro $_[0]', - wcyu => 'WCY je zakazano pro $_[0]', - wwv1 => '$_[0] bud chybi nebo je mimo rozsah', - wwv2 => 'Duplicitni WWV', - wwvs => 'WWV je povoleno pro $_[0]', - wwvu => 'WWV je zakazano pro $_[0]', - wxs => 'WX je povoleno pro $_[0]', - wxu => 'WX je zakazano pro $_[0]', - }, + echoon => q{Echo povoleno}, + echooff => q{Echo zakazano}, + echow => q{*Echo je momentalne zakazano, pouzij set/echo k povoleni}, + emaile1 => q{Prosim zadej svou e-mailovou adresu, set/email }, + emaila => q{Tva e-mailova adresa je nyni "$_[0]"}, + email => q{E-mailova adresa je nastavena na: $_[0]}, + export1 => q{pouziti: export }, + export2 => q{$_[3] hlasi chyby pri exportu zpravy $_[0] do $_[1] ($_[2])}, + export3 => q{$_[2 ] exportoval zpravu $_[0] to $_[1]}, + filter1 => q{Filtr $_[0] byl zmenen pro for $_[1]}, + filter2 => q{Neznamy prikaz filtru $_[0]}, + filter3 => q{Nejsou zadne definovane filtry pro $_[0]}, + filter4 => q{$_[0]$_[1] Filtr $_[2] smazan pro $_[3]}, + filter5 => q{potrebuji nejake prikazy filtru...}, + filter6 => q{$_[0]$_[1] Filtr pro $[2] nebyl nalezen}, + grids => q{QRA ctverec byl povolen pro $_[0]}, + gridu => q{QRA ctverec byl zakazan pro $_[0]}, + illcall => q{Lituji, $_[0] neni platna znacka}, + hasha => q{$_[0] uz existuje v $_[1]}, + hashb => q{$_[0] byl pridan do $_[1]}, + hashc => q{$_[0] byl odstranen z $_[1]}, + hashd => q{$_[0] neni v $_[1]'}, + hashe => q{$_[0] byl nastaven v $_[1]'}, + helpe1 => q{Systemova napoveda neni k dispozici, informuj sysopa}, + helpe2 => q{Napoveda neni k dispozici k $_[0]}, + heres => q{$_[0] je pritomen}, + heade1 => q{S pouzitim souradnic clusteru, doporucuji zadat set/location nebo set/qra}, + hereu => q{$_[0] neni pritomen}, + homebbs => q{Domaci BBS je nastavena na: $_[0]}, + homenode => q{Domaci DXC nod je nastaven na: $_[0]}, + hnodee1 => q{Prosim zadej svuj domaci DXC nod, set/homenode }, + hnodee2 => q{Nastaveni domaciho nodu na $_[0] selhalo}, + hnode => q{Tvuj domaci nod je nyni "$_[0]"}, + init1 => q{vyslana inicializacni zprava do $_[0]}, + iso => q{$_[0] izolovan}, + isou => q{$_[0] neni izolovan}, + isoc => q{$_[0] vytvoren a izolovan}, + isoari => q{vstupni route filtr pro $_[0] uz existuje; zadej nejprve clear/route input $_[0]}, + isoaro => q{vystupni route filtr pro $_[0] uz existuje; zadej nejprve clear/route $_[0]}, + isow => q{$_[0] je izolovan; zadej nejprve unset/isolate $_[0]}, + l1 => q{Lituji $_[0], uz jsi zalogovan na jinem kanalu}, + l2 => q{Ahoj $_[0], toto je $main::mycall, $main::myqth\npouzivajici DXSpider V$main::version build $main::build}, + lang => q{Jazyk je nyni nastaven na Cestinu (napoveda zatim v procesu)}, + lange1 => q{set/language kde je jedno z ($_[0])}, + lange2 => q{selhalo nastaveni jazyka na $_[0]'}, + lh1 => q{$main::data/hop_table.pl neexistuje}, + loce1 => q{Prosim zadej svou polohu, set/location }, + loce2 => q{Nemohu rozpoznat "$_[0]" jako sirka/delka (napr 52 20 N 0 16 E)}, + loce3 => q{$_[0] je QRA lokator, prosim pouzij: set/qra $_[0]}, + loc => q{Tva poloha (sirka/delka) je nyni "$_[0]"}, + lockout => q{$_[0] zamknuto}, + lockoutc => q{$_[0] vytvoreno a zamknuto}, + lockoutun => q{$_[0] Odemceno}, + lockoutuse => q{pouziti: sh/lockout |ALL}, + loginu => q{Uzivatel $_[0] prihlasen}, + logoutu => q{Uzivatel $_[0] odhlasen}, + loginn => q{Nod $_[0] prihlasen}, + logoutn => q{Nod $_[0] odhlasen}, + m1 => q{Zadej nazev (30 znaku):}, + m2 => q{Kopie zpravy $_[0] byla odeslana k $_[1]}, + m3 => q{Lituji, $_[0] je neplatna cilova adresa}, + m4 => q{Lituji, zprava $_[0] neni dostupna}, + m5 => q{Lituji, potrebuji cislo zpravy'}, + m6 => q{Odpoved na: $_[0]}, + m7 => q{Nezev: $_[0]}, + m8 => q{Zadej text zpravy /EX pro konec nebo /ABORT k preruseni}, + m9 => q{Mas novou zpravu}, + m10 => q{Zprava prerusena}, + m11 => q{Zprava c. $_[0] ulozena a smerovana na $_[1]}, + m12 => q{Zprava c. $_[0] byla smazana}, + m13 => q{Zprava c. $_[0] chybi}, + m14 => q{Zprava c. $_[0] byla oznacena a zaslana do $_[1]}, + m15 => q{Zprava c. $_[0] byla neoznacena a zaslana do $_[1]}, + m16 => q{Potrebuji cislo zpravy}, + m17 => q{Lituji, nemohu posilat zpravy v modu $_[0]}, + m18 => q{Lituji, zprava $_[0] ma momentalne status KEEP}, + msg1 => q{Zpravy v rubrikach cekaji ve fronte}, + msg2 => q{Privatni zpravy cekaji ve fronte}, + msg3 => q{Zprava $_[0]: $_[1] byla zmenena z $_[2] na $_[3]}, + msgu => q{pouziti: msg data...}, + merge1 => q{Pozadavek na Merge pro $_[1] spotu a $_[2] WWV byl zaslan do $_[0]}, + moon => q{Poloha dd/mm/yyyy Vychod Zapad}, + moon_with_azel => q{Poloha dd/mm/yyyy Vychod Zapad Azim Elev}, + mond => q{Monitoring je zakazan}, + mone => q{Monitoring je povolen}, + namee1 => q{Prosim zadej sve jmeno, set/name }, + namee2 => q{Nemohu najit uzivatele $_[0]!}, + name => q{Tve jmeno je nyni "$_[0]"}, + nodea => q{$_[0] nastaven jako nod typu AK1A}, + nodeac => q{$_[0] vytvoren jako nod typu AK1A}, + nodeb => q{$_[0] nastaven jako BBS}, + nodebc => q{$_[0] vytvoren jako BBS}, + nodec => q{$_[0] nastaven jako nod typu CLX}, + nodecc => q{$_[0] vytvoren jako nod typu CLX}, + noder => q{$_[0] nastaven jako nod typu AR-Cluster}, + noderc => q{$_[0] vytvoren jako nod typu AR-Cluster}, + nodes => q{$_[0] nastaven jako nod typu DXSpider}, + nodesc => q{$_[0] vytvoren jako nod typu DXSpider}, + nodex => q{$_[0] nastaven jako nod typu DXNET}, + nodexc => q{$_[0] vytvoren jako nod typu DXNET}, + nodeu => q{$_[0] nastaven opet jako uzivatel}, + nodee1 => q{Nemuzes pouzit tento prikaz zatimco tvuj cil ($_[0]) je on-line}, + notdone => q{NEBYLO provedeno}, + nothere => q{Lituji, ale $_[0] neni momentalne zde, zkus to pozdeji'}, + obscount => q{Pocatecni hodnota Ping citace nodu $_[0] byla nastavena na $_[1]}, + ok => q{Operace byla uspesna}, + outconn => q{Zbyvajici spojeni na $_[0]}, + page => q{Stiskni Enter pro pokracovani, A k preruseni ($_[0] radku) >}, + pagelth => q{Delka stranky je nyni $_[0]}, + passerr => q{Prosim pouzij: SET/PASS }, + passphrase => q{Fraze byla nastavena nebo zmenena pro $_[0]}, + passphraseu => q{Fraze byla odstranena pro $_[0]}, + password => q{Heslo bylo nastaveno nebo zmeneno pro $_[0]}, + passwordu => q{Heslo bylo odstraneno pro $_[0]}, + pc90s => q{PC90 bylo povoleno pro $_[0]}, + pc90u => q{PC90 bylo zakazano $_[0]}, + pingo => q{Ping byl zaslan na $_[0]}, + pingi => q{Ping se vratil od $_[0] $_[1] (Prum $_[2]) sekundy}, + pinge1 => q{Nemuzu pingnout sam sebe!}, + pingint => q{Ping interval na $_[0] byl nastaven na $_[1] sekundy}, + 'pos' => q{Od znacky: $_[0] Sirka: $_[1] Delka: $_[2]}, + pr2 => q{($_[0]) de $main::mycall $_[1] $_[2] >}, + prs => q{Prompt byl nastaven na "$_[0]"}, + pru => q{Prompt byl vracen na default}, + priv => q{Uroven prav byla zmenena na $_[0]}, + prx => q{$main::mycall >}, + pw0 => q{Zadej stare heslo: }, + pw1 => q{Zadej nove heslo: }, + pw2 => q{Zadej znovu nove heslo: }, + pw3 => q{Heslo bylo zmeneno}, + pw4 => q{Hesla se lisi, heslo NEBYLO zmeneno}, + qll => q{Prpsim zadej svou polohu s pomoci set/location nebo set/qra}, + qthe1 => q{Prosim zadej sve QTH, set/qth }, + qth => q{Tve QTH je nyni "$_[0]"}, + qrae1 => q{Prosim zadej svuj QRA lokator, set/qra (napr set/qra JN79FM)}, + qrashe1 => q{Prosim zadej QRA locator, napr sh/qra JN79FM nebo sh/qra JN79FM JN63GV}, + qrae2 => q{Nerozpoznal jsem "$_[0]" jako QRA lokator (napr JN79FM)}, + qra => q{Tvuj QRA lokator je nyni "$_[0]"}, + rcmdo => q{RCMD "$_[0]" bylo zaslano do $_[1]}, + read1 => q{Lituji, nemas zadne nove zpravy}, + read2 => q{Zprava $_[0] nenalezena}, + read3 => q{Msg $_[0] neni k dispozici}, + rec => q{$_[0] zaznamu}, + reg => q{$_[0] registrovano}, + regc => q{$_[0] vytvoreno a registrovano}, + reginac => q{Registrace neni aktivni (set/var \$main::reqreg = 1 k aktivaci)}, + regun => q{$_[0] neregistrovano}, + route => q{$_[0] na $_[1] via $_[2]}, + sat1 => q{Tabulka pro $_[0] pro nasledujicich $_[1] hodin s intervalem $_[2] min}, + sat2 => q{dd/mm UTC Lat Lon Alt Km Az El Vzdal Km}, + sat3 => q{Syntaxe: SH/SAT [ ]}, + sat4 => q{Druzice k dispozici/Stari Kepl. elem (dny):-}, + sat5 => q{potrebuji nnnnn.AMSAT v nazvu ke stazeni keps z teto zpravy}, + satnf => q{Druzice $_[0] je neznama}, + satdisc => q{-----}, + set => q{$_[0] povoleno pro $_[1]}, + sethop1 => q{pouziti: set/hops ann|spots|wwv|wcy }, + sethop2 => q{$_[0] skoku nastaveno na $_[1]$_[2] pro $_[3]'}, + sethop3 => q{Zadny pocet skoku nastaven pro $_[0]'}, + shu => q{"SHU" nestaci, je treba alespon "SHUT" k vypnuti nodu}, + shutting => q{$main::mycall se vypina...}, + sloc => q{Cluster lat $_[0] long $_[1], NEZAPOMEN ZMENIT DXVars.pm}, + snode1 => q{Nod Znacka Typ Verze }, + snode2 => q{$_[0] $_[1] $_[2]}, + snode3 => q{$_[0] Neznama znacka}, + sqra => q{Cluster QRA Lokator$_[0], NEZAPOMEN ZMENIT DXVars.pm}, + sorry => q{Lituji}, + spf1 => q{spoof: vytvarim noveho uzivatele $_[0]}, + stathf => q{HF DX Spot Stats, poslednich $_[1] dni pocinaje $_[0]}, + stathft => q{HF DX Spot Stats, poslednich $_[2] dni pocinaje $_[1] pro DXCC $_[0]}, + statvhf => q{VHF+ DX Spot Stats, poslednich $_[1] dni pocinaje $_[0]}, + statvhft => q{VHF+ DX Spot Stats, poslednich $_[2] dni pocinaje $_[1] pro DXCC $_[0]}, + statdx => q{Prehled DX Spotu pro $_[1] dni pocinaje $_[0]}, + sun => q{Poloha dd/mm/yyyy Vychod Zapad}, + sun_with_azel => q{Poloha dd/mm/yyyy Vychod Zapad Azim Elev}, + susdb1 => q{pouziti: znacka stat mesto}, + susdb2 => q{USDB $_[0] bylo $_[1], $_[2]}, + susdb3 => q{USDB $_[0] je nyni $_[1], $_[2]}, + susdb4 => q{USDB $_[0] smazano}, + suser1 => q{pouziti: znacka jmeno_uzivatele hodnota}, + suser2 => q{User $_[0] nebylo nalezeno}, + suser3 => q{User field '$_[0]' bylo '$_[1]' nyni nastaveno na '$_[2]'}, + suser4 => q{Jmeno uzivatele '$_[0]' neexistuje}, + time1 => q{Lokalni cas: $_[0] $_[1], UTC $_[2]}, + time2 => q{$_[0] Lokalni (standardni) cas: $_[1] ($_[2] hodin)}, + time3 => q{$_[0] $_[1]}, + talks => q{Talk povolen pro $_[0]}, + talku => q{Talk zakazan pro $_[0]}, + talkend => q{Skoncil spolecnou konverzaci}, + talkinst => q{Vstupuji do konverzacniho modu, /EX pro skonceni, / ke spusteni prikazu}, + talknh => q{Lituji, $_[0] neni momentalne online}, + talkprompt => q{Talk ($_[0])>}, + talkstart => q{Zahajil spolecnou konverzaci}, + unset => q{$_[0] zakazano pro for $_[1]}, + unsethop1 => q{pouziti: unset/hops ann|spots|wwv|wcy}, + unsethop2 => q{pocet skoku neni nastaven na $_[1] pro $_[0]'}, + usernf => q{*** Uzivatelsky zaznam pro $_[0] nebyl nalezen ***}, + wcy1 => q{$_[0] bud chybi nebo je mimo rozsah}, + wcy2 => q{Duplicitni WCY}, + wcys => q{WCY je povoleno pro $_[0]}, + wcyu => q{WCY je zakazano pro $_[0]}, + wwv1 => q{$_[0] bud chybi nebo je mimo rozsah}, + wwv2 => q{Duplicitni WWV}, + wwvs => q{WWV je povoleno pro $_[0]}, + wwvu => q{WWV je zakazano pro $_[0]}, + wxs => q{WX je povoleno pro $_[0]}, + wxu => q{WX je zakazano pro $_[0]}, + }, - pt => { - addr => 'Endereo definido para: $_[0]', - already => '$_[0] J ligado', - anns => 'Anncios activado para $_[0]', - annu => 'Anncios desactivado para $_[0]', - annts => 'AnnTalk activado para $_[0]', - anntu => 'AnnTalk desactivado para $_[0]', - badnode1 => '$_[0] agora um node mau', - badnode2 => '$_[0] agora um bom node', - badnode3 => 'Lista dos maus nodes:-', - bbse1 => 'Por favor escreva qual a sua BBS local,, set/bbs ', - bbs => 'A sua bbs local agora \"$_[0]\"', - beepoff => 'A campainha est desligada agora', - beepon => 'A campainha est ligada agora', - call1 => 'Indicativo fechado via $_[0]:', - conother => 'Desculpe $_[0] voc est ligado a mim noutra porta', - concluster => 'Desculpe $_[0] voc j est ligado em algum sitio no cluster (on $_[1])', - conscript => 'nenhum script de ligao chamado \"$_[0]\" encontrado em $main::root/connect', - confail => 'ligao para $_[0] falhada ($_[1])', - constart => 'ligao para $_[0] comeada', - deluser => 'User $_[0] foi apagado', - db1 => 'Esta base de dados est localizada em $_[0]', - db2 => 'Desculpe, mas a tecla: $_[0] no foi encontrada em $_[1]', - db3 => 'Desculpe, base de dados $_[0] no\ existe aqui', - db4 => 'Desculp, base de dados $_[0] localizada em $_[1] no\ est actualmente acessivel', - db5 => 'Acedendo a base da dados remota em $_[0]...espere...', - db6 => 'Base de dados $_[0] j existe, apague-a primeiro', - db7 => 'Base de dados $_[0] criada para um node remoto $_[1]', - db8 => 'Base de dados $_[0] criada localmente', - db9 => 'Base de dados $_[0] removida', - db10 => '$_[0] registos importados para $_[1]', - db11 => 'Enviando o(s) seu(s) pedido(s) para $_[0], por favor espere...', - dfreq1 => 'Freq invlida $_[0] precisa: ex 0/30000 ou hf ou hf/cw', - dir1 => 'Nenhumas mensagens encontradas', - disc1 => 'Desligado por $_[0]', - disc2 => 'Canal $_[0] desligado', - disc3 => 'Nenhum canal, mas ligao $_[0] desfeita', - disc4 => 'Nenhum canal ou ligao mas orfo $_[0] desligado', - done => 'Feito', - dup => 'Desculpe, isto um duplicado', - dx1 => 'Frequencia $_[0] no em banda (veja show/band); uso: DX [de indicativo] freq call comentrios', - dx2 => 'Preciso de um indicativo; uso: DX [de indicativo] freq call comentrios', - dx3 => 'O indicativo ou frequncia est invlido', - dxcqs => 'DX CQ Zonas activado para $_[0]', - dxcqu => 'DX CQ Zonas desactivada para $_[0]', - dxitus => 'DX ITU Zonas activado para $_[0]', - dxituu => 'DX ITU Zonas desactivada para $_[0]', - dxs => 'DX Spots activado para $_[0]', - dxu => 'DX Spots desactivado $_[0]', - e1 => 'Comando invlido', - e2 => 'Erro: $_[0]', - e3 => '$_[0]: $_[1] no encontrado', - e4 => 'Preciso de pelo menos dum prefixo ou indicativo', - e5 => 'No permitido', - e6 => '*** Nenhuma estao especificada ***', - e7 => 'indicativo $_[0] no visivel no cluster', - e8 => 'Preciso de um indicativo e algum texto', - e9 => 'Preciso de pelo menos dalgum texto', - e10 => '$_[0] no est ligado localmente', - e11 => 'No pode usar $main:mycall como alvo', - e12 => 'Preciso de um indicativo de node', - e13 => '$_[0] no um node', - e14 => 'O primeiro argumento deve ser numrico e > 0', - e15 => 'qualificador invlido \"$_[0]\"', - e16 => 'O ficheiro \"$_[0]\" existe', - e17 => 'Por favor no use as palavras: @_ aqui', - e18 => 'No posso ligar a $_[0] ($!)', - e19 => 'Caracter invlido na linha $_[0]', - e20 => 'sinal $_[0] no reconhecido', - e21 => '$_[0] no numrico', - e22 => '$_[0] no um indicativo', - e23 => '$_[0] no um intervalo (ex 0/30000)', - e24 => 'Desculpe, acesso internet no est activado', - e25 => 'Desculpe o valor deve estar entre $_[0] e $_[1]', - e26 => 'Muitos erros concurrenciais, voc vai ser desligado', - e27 => '$_[0] no um nmero ou um prefixo de um indicativo', - e28 => 'Desculpe, voc precisa ser registado (SP $main::myalias para registrar)', - e29 => 'Preciso de uma password', - e30 => 'No posso abrir $_[0] $!', - e31 => '$_[0] no um usurio', - e32 => 'Preciso de uma passphrase', - e33 => '$_[0] no um nmero de dias ou uma data vlida', - e34 => 'Preciso de um GRUPO e algum texto', - e35 => 'Voc no um membro de $_[0], junte $_[0]', + pt => { + addr => q{Endereo definido para: $_[0]}, + already => q{$_[0] J ligado}, + anns => q{Anncios activado para $_[0]}, + annu => q{Anncios desactivado para $_[0]}, + annts => q{AnnTalk activado para $_[0]}, + anntu => q{AnnTalk desactivado para $_[0]}, + badnode1 => q{$_[0] agora um node mau}, + badnode2 => q{$_[0] agora um bom node}, + badnode3 => q{Lista dos maus nodes:-}, + bbse1 => q{Por favor escreva qual a sua BBS local,, set/bbs }, + bbs => q{A sua bbs local agora "$_[0]"}, + beepoff => q{A campainha est desligada agora}, + beepon => q{A campainha est ligada agora}, + call1 => q{Indicativo fechado via $_[0]:}, + conother => q{Desculpe $_[0] voc est ligado a mim noutra porta}, + concluster => q{Desculpe $_[0] voc j est ligado em algum sitio no cluster (on $_[1])}, + conscript => q{nenhum script de ligao chamado "$_[0]" encontrado em $main::root/connect}, + confail => q{ligao para $_[0] falhada ($_[1])}, + constart => q{ligao para $_[0] comeada}, + deluser => q{User $_[0] foi apagado}, + db1 => q{Esta base de dados est localizada em $_[0]}, + db2 => q{Desculpe, mas a tecla: $_[0] no foi encontrada em $_[1]}, + db3 => q{Desculpe, base de dados $_[0] no\ existe aqui}, + db4 => q{Desculp, base de dados $_[0] localizada em $_[1] no\ est actualmente acessivel}, + db5 => q{Acedendo a base da dados remota em $_[0]...espere...}, + db6 => q{Base de dados $_[0] j existe, apague-a primeiro}, + db7 => q{Base de dados $_[0] criada para um node remoto $_[1]}, + db8 => q{Base de dados $_[0] criada localmente}, + db9 => q{Base de dados $_[0] removida}, + db10 => q{$_[0] registos importados para $_[1]}, + db11 => q{Enviando o(s) seu(s) pedido(s) para $_[0], por favor espere...}, + dfreq1 => q{Freq invlida $_[0] precisa: ex 0/30000 ou hf ou hf/cw'}, + dir1 => q{Nenhumas mensagens encontradas}, + disc1 => q{Desligado por $_[0]}, + disc2 => q{Canal $_[0] desligado}, + disc3 => q{Nenhum canal, mas ligao $_[0] desfeita}, + disc4 => q{Nenhum canal ou ligao mas orfo $_[0] desligado}, + done => q{Feito}, + dup => q{Desculpe, isto um duplicado}, + dx1 => q{Frequencia $_[0] no em banda (veja show/band); uso: DX [de indicativo] freq call comentrios}, + dx2 => q{Preciso de um indicativo; uso: DX [de indicativo] freq call comentrios}, + dx3 => q{O indicativo ou frequncia est invlido}, + dxcqs => q{DX CQ Zonas activado para $_[0]}, + dxcqu => q{DX CQ Zonas desactivada para $_[0]}, + dxitus => q{DX ITU Zonas activado para $_[0]}, + dxituu => q{DX ITU Zonas desactivada para $_[0]}, + dxs => q{DX Spots activado para $_[0]}, + dxu => q{DX Spots desactivado $_[0]}, + e1 => q{Comando invlido}, + e2 => q{Erro: $_[0]}, + e3 => q{$_[0]: $_[1] no encontrado}, + e4 => q{Preciso de pelo menos dum prefixo ou indicativo}, + e5 => q{No permitido}, + e6 => q{*** Nenhuma estao especificada ***}, + e7 => q{indicativo $_[0] no visivel no cluster}, + e8 => q{Preciso de um indicativo e algum texto}, + e9 => q{Preciso de pelo menos dalgum texto}, + e10 => q{$_[0] no est ligado localmente}, + e11 => q{No pode usar $main:mycall como alvo}, + e12 => q{Preciso de um indicativo de node}, + e13 => q{$_[0] no um node}, + e14 => q{O primeiro argumento deve ser numrico e > 0}, + e15 => q{qualificador invlido "$_[0]"}, + e16 => q{O ficheiro "$_[0]" existe}, + e17 => q{Por favor no use as palavras: @_ aqui'}, + e18 => q{No posso ligar a $_[0] ($!)}, + e19 => q{Caracter invlido na linha $_[0]}, + e20 => q{sinal $_[0] no reconhecido}, + e21 => q{$_[0] no numrico}, + e22 => q{$_[0] no um indicativo}, + e23 => q{$_[0] no um intervalo (ex 0/30000)'}, + e24 => q{Desculpe, acesso internet no est activado}, + e25 => q{Desculpe o valor deve estar entre $_[0] e $_[1]}, + e26 => q{Muitos erros concurrenciais, voc vai ser desligado}, + e27 => q{$_[0] no um nmero ou um prefixo de um indicativo'}, + e28 => q{Desculpe, voc precisa ser registado (SP $main::myalias para registrar)}, + e29 => q{Preciso de uma password}, + e30 => q{No posso abrir $_[0] $!}, + e31 => q{$_[0] no um usurio'}, + e32 => q{Preciso de uma passphrase}, + e33 => q{$_[0] no um nmero de dias ou uma data vlida}, + e34 => q{Preciso de um GRUPO e algum texto}, + e35 => q{Voc no um membro de $_[0], junte $_[0]}, - echoon => 'Eco activado', - echooff => 'Eco desactivado', - echow => '*O eco est actualmente desactivado, escreva set/echo para activar', - emaile1 => 'Por favor escreva o seu email, faa set/email ', - emaila => 'O seu email agora \"$_[0]\"', - email => 'Email definido para: $_[0]', - export1 => 'uso: export ', - export2 => '$_[3] houve um erro ao exportar a msg $_[0] para $_[1] ($_[2])', - export3 => '$_[2 ] msg $_[0] exportada para $_[1]', - filter1 => 'Filtro $_[0] actualizado para $_[1]', - filter2 => 'Filtro de palavra chave $_[0] desconhecido', - filter3 => 'Nenhuns filtros definidos para $_[0]', - filter4 => '$_[0]$_[1] Filtro $_[2] apagado para $_[3]', - filter5 => 'preciso de alguns comandos de filtro...', - filter6 => '$_[0]$_[1] Filtro para $[2] no encontrado', - grids => 'Grelha de DX activado para $_[0]', - gridu => 'Grelha de DX desactivado para $_[0]', - illcall => 'Desculpe, $_[0] um indicativo invlido', - hasha => '$_[0] j existe em $_[1]', - hashb => '$_[0] adicionado para $_[1]', - hashc => '$_[0] removido de $_[1]', - hashd => '$_[0] no em $_[1]', - hashe => '$_[0] definido em $_[1]', - helpe1 => 'Sistema de ajuda no disponivel, diga ao sysop', - helpe2 => 'Nenhuma ajuda disponivel em $_[0]', - heres => 'Aqui definido em $_[0]', - heade1 => 'Usando $main::mycall coords, considere fazer um set/location ou set/qra', - hereu => 'Aqui no definido em $_[0]', - homebbs => 'BBS local definida como: $_[0]', - homenode => 'Node local definido como: $_[0]', - hnodee1 => 'Por favor escreva o seu node local, set/homenode ', - hnodee2 => 'Falha ao definir o node local em $_[0]', - hnode => 'O seu node local agora \"$_[0]\"', - init1 => 'enviar mensagem de inicializao para $_[0]', - iso => '$_[0] Isolado', - isou => '$_[0] No isolado', - isoc => '$_[0] criado e isolado', - isoari => 'h um filtro de rota entrado para $_[0]; clear/route input $_[0] primeiro', - isoaro => 'h um filtro de rota saido para $_[0]; clear/route $_[0] primeiro', - isow => '$_[0] est isolado; unset/isolate $_[0] primeiro', - join => 'a juntar ao grupo $_[0]', - l1 => 'Desculpe $_[0], voc est ligado noutro canal', - l2 => 'Ol $_[0], isto $main::mycall em $main::myqth\nrunning DXSpider V$main::version build $main::build', - lang => 'Linguagem agora o Portugus', - lange1 => 'set/language aonde uma de ($_[0])', - lange2 => 'falha ao definir uma lngua em $_[0]', - leave => 'a deixar o grupo $_[0]', - lh1 => '$main::data/hop_table.pl no existe', - loce1 => 'Por favor diga as suas coordenadas,, set/location ', - loce2 => 'No reconhece \"$_[0]\" como uma Lat/Long (ex 52 20 N 0 16 E)', - loce3 => '$_[0] um locator, por favor use: set/qra $_[0]', - loc => 'A sua lat/long agora \"$_[0]\"', - lockout => '$_[0] Fechado', - lockoutc => '$_[0] Criado e fechado', - lockoutun => '$_[0] Aberto', - lockoutuse => 'uso: sh/lockout |ALL', - loginu => 'Usurio $_[0] ligou', - logoutu => 'Usurio $_[0] desligou-se', - loginn => 'Node $_[0] ligou', - logoutn => 'Node $_[0] desligou', - m1 => 'Escrever o ttulo (30 caracteres):', - m2 => 'Cpia da msg $_[0] enviada para $_[1]', - m3 => 'Desculpe, $_[0] o endereo inaceitvel', - m4 => 'Desculpe, no pode aceder mensagem $_[0]', - m5 => 'Desculpe, eu preciso do nmero da mensagem', - m6 => 'Responder a: $_[0]', - m7 => 'Ttulo : $_[0]', - m8 => 'Escrever a mensagem /EX para enviar ou /ABORT para sair', - m9 => 'Uma nova mensagem chegou para si', - m10 => 'Mensagem abortada', - m11 => 'Mensagem nmero $_[0] guardada e enviada para $_[1]', - m12 => 'Mensagem nmero $_[0] apagada', - m13 => 'Mensagem nmero $_[0] desaparecida', - m14 => 'Mensagem nmero $_[0] marcada como enviada para $_[1]', - m15 => 'Mensagem nmero $_[0] desmarcada como enviada para $_[1]', - m16 => 'Preciso do nmero da mensagem', - m17 => 'Desculpe, no posso enviar mensagens no modo $_[0]', - m18 => 'Desculpe, a mensagem $_[0] est actualmente definida como KEEP', - msg1 => 'Filas das mensagens de boletins', - msg2 => 'Filas das mensagens privadas', - msg3 => 'Mensagem $_[0]: $_[1] alterada de $_[2] para $_[3]', - msgu => 'uso: msg data...', - merge1 => 'Submeter pedido para $_[1] spots e $_[2] WWV enviado para $_[0]', - moon => 'Localizao dd/mm/yyyy Subir Definido', - moon_with_azel => 'Localizao dd/mm/yyyy Subir Definido Azim Elev', - mond => 'Monitorizao desactivada', - mone => 'Monitorizao activada', - namee1 => 'Por favor escreva o seu nome, set/name ', - namee2 => 'No encontro o usurio $_[0]!', - name => 'O seu nome \"$_[0]\"', - nodea => '$_[0] definido como um node tipo AK1A', - nodeac => '$_[0] criado como um node tipo AK1A', - nodeb => '$_[0] definido como BBS', - nodebc => '$_[0] criado como BBS', - nodec => '$_[0] definido como um node tipo CLX', - nodecc => '$_[0] criado como um node tipo CLX', - noder => '$_[0] definido como um node tipo AR-Cluster', - noderc => '$_[0] criado como um node tipo AR-Cluster', - nodes => '$_[0] definido como um node tipo DXSpider', - nodesc => '$_[0] criado como um node tipo DXSpider', - nodex => '$_[0] definido como um node tipo DXNET', - nodexc => '$_[0] criado como um node tipo DXNET', - nodeu => '$_[0] definido como um usurio', - nodee1 => 'Voc no pode usar este comando enquanto o seu alvo ($_[0]) est ligado', - notdone => 'No foi feito', - nothere => 'Desculpe, mas $_[0] no est aqui de momento, por favor tente mais tarde', - obscount => 'Ping obsolescence conta como $_[0] definido para $_[1]', - ok => 'Operao bem sucedida', - outconn => 'Ligao exterior para $_[0]', - page => 'Prima no Enter para continuar, A para abortar ($_[0] linhas) >', - pagelth => 'O tamanho da pgina agora de $_[0]', - passerr => 'Por favor use: SET/PASS ', - passphrase => 'Passphrase definida ou alterada por $_[0]', - passphraseu => 'Passphrase removida por $_[0]', - password => 'Password definida ou alterada por $_[0]', - passwordu => 'Password removida por $_[0]', - pc90s => 'PC90 activado por $_[0]', - pc90u => 'PC90 desactivado $_[0]', - pingo => 'Ping comeou para $_[0]', - pingi => 'Ping retornado de $_[0] $_[1] (Ave $_[2]) segundos', - pinge1 => 'No pode fazer ping para si prprio!', - pingint => 'Intervalo de Ping em $_[0] definido para $_[1] segundos', - 'pos' => 'Do indicativo: $_[0] Lat: $_[1] Long: $_[2]', - prs => 'Prompt agora definida para \"$_[0]\"', - pru => 'Prompt agora regressou para a default', - priv => 'Nivel de privilgio alterado em $_[0]', - prx => '$main::mycall >', - pw0 => 'Escreva a password antiga: ', - pw1 => 'Escreva a password nova: ', - pw2 => 'Escreva novamente a nova password: ', - pw3 => 'Password alterada', - pw4 => 'As Passwordes diferem, a password NO foi alterada', - qll => 'Por favor escreva a sua localizao com set/location ou set/qra', - qthe1 => 'Por favor escreva o seu QTH, set/qth ', - qth => 'O seu QTH \"$_[0]\"', - qrae1 => 'Por favor escreva o seu locator, set/qra (ex set/qra IM58LP)', - qrashe1 => 'Por favor escreva o seu locator, ex sh/qra IM58LP ou sh/qra IM58LP IO93NS', - qrae2 => 'No reconhece \"$_[0]\" como um locator (ex IM58LP)', - qra => 'O seu locator \"$_[0]\"', - qsl1 => 'Call Manager Times Last Time Seen De', - rcmdo => 'RCMD \"$_[0]\" enviado para $_[1]', - read1 => 'Desculpe, nenhuma mensagem nova para voc', - read2 => 'Msg $_[0] no foi encontrada', - read3 => 'Msg $_[0] no est disponivel', - rec => '$_[0] registos', - reg => '$_[0] registados', - regc => '$_[0] criado e registado', - reginac => 'O registo no est activo (set/var \$main::reqreg = 1 para activar)', - regun => '$_[0] no registado', - route => '$_[0] em $_[1] via $_[2]', - sat1 => 'Tabela de rbitras para $_[0] para a prxima $_[1] horas em todos os $_[2] mins', - sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km', - sat3 => 'Sintaxe: SH/SAT [ ]', - sat4 => 'Satlites disponiveis/Idade das rbitras (dias):-', - sat5 => 'preciso nnnnn.AMSAT no ttulo para carregar as rbitras desde esta mensagem', - satnf => 'Satlite $_[0] desconhecido', - satdisc => '-----', - set => '$_[0] activado por $_[1]', - sethop1 => 'uso: set/hops ann|spots|wwv|wcy ', - sethop2 => '$_[0] saltos definidos em $_[1]$_[2] por $_[3]', - sethop3 => 'Nenhuns saltos definidos por $_[0]', - shu => '\"SHU\" no suficiente! voc precisa pelo menos de \"SHUT\" para desligar o node', - shutting => '$main::mycall a desligar...', - sloc => 'Cluster lat $_[0] long $_[1], NO ESQUECER DE ALTERAR O SEU DXVars.pm', - snode1 => 'Node Call Sort Verso', - snode2 => '$_[0] $_[1] $_[2]', - snode3 => '$_[0] indicativo desconhecido', - sqra => 'Cluster locator$_[0], NO ESQUECER DE ALTERAR O SEU DXVars.pm', - sorry => 'Desculpe', - spf1 => 'spoof: criando um novo usurio $_[0]', - stathf => 'HF DX Spot Stats, ltimo $_[1] dias de $_[0]', - stathft => 'HF DX Spot Stats, ltimo $_[2] dias de $_[1] por DXCC $_[0]', - statvhf => 'VHF+ DX Spot Stats, ltimo $_[1] dias de $_[0]', - statvhft => 'VHF+ DX Spot Stats, ltimo $_[2] dias de $_[1] por DXCC $_[0]', - statdx => 'Total DX Spots por $_[1] dias de $_[0]', - sun => 'Localizao dd/mm/yyyy Subir Definido', - sun_with_azel => 'Localizao dd/mm/yyyy Subir Definido Azim Elev', - susdb1 => 'uso: indicativo da cidade do estado', - susdb2 => 'USDB $_[0] foi $_[1], $_[2]', - susdb3 => 'USDB $_[0] agora $_[1], $_[2]', - susdb4 => 'USDB $_[0] apagado', - suser1 => 'uso: indicativo valor user_field_name', - suser2 => 'Usurio $_[0] no foi encontrado', - suser3 => 'Campo do usurio \'$_[0]\' fooi \'$_[1]\' agora definido para \'$_[2]\'', - suser4 => 'O campo de nome do usurio \'$_[0]\' no existe', - time1 => 'Tempo local: $_[0] $_[1], UTC $_[2]', - time2 => '$_[0] Tempo local (standard): $_[1] ($_[2] Horas)', - time3 => '$_[0] $_[1]', - talks => 'QSO activado por $_[0]', - talku => 'QSO desactivado por $_[0]', - talkend => 'Conversao acabada para si', - talkinst => 'A entrar no mode de conversao, /EX para terminar, / para correr como um comando', - talknh => 'Desculpe $_[0] no est ligado de momento', - talkprompt => 'Conversar ($_[0])>', - talkstart => 'A comear a conversao para si', - unset => '$_[0] desactivado por $_[1]', - unsethop1 => 'uso: unset/hops ann|spots|wwv|wcy', - unsethop2 => 'saltos no definidos em $_[1] por $_[0]', - usernf => '*** Registo de usurio por $_[0] no foi encontrado ***', - usstates => 'Mostrar estados dos EUA activado por $_[0]', - usstateu => 'Desactivar os estados dos EUA por $_[0]', - wcy1 => '$_[0] est desaparecido ou fora de alcance', - wcy2 => 'WCY duplicado', - wcys => 'WCY enabled for $_[0]', - wcyu => 'WCY desactivado por $_[0]', - wpc16s => 'Permite o PC16 de $_[0] activado', - wpc16u => 'Permite o PC16 de $_[0] desactivado', - wpc19s => 'Rota PC19 por $_[0] activado', - wpc19u => 'Rota PC19 por $_[0] desactivado', - wwv1 => '$_[0] est desaparecido ou fora de alcance', - wwv2 => 'WWV duplicado', - wwvs => 'WWV activado por $_[0]', - wwvu => 'WWV desactivado $_[0]', - wxs => 'WX activado por $_[0]', - wxu => 'WX desactivado por $_[0]', + echoon => q{Eco activado}, + echooff => q{Eco desactivado}, + echow => q{*O eco est actualmente desactivado, escreva set/echo para activar}, + emaile1 => q{Por favor escreva o seu email, faa set/email }, + emaila => q{O seu email agora "$_[0]"}, + email => q{Email definido para: $_[0]}, + export1 => q{uso: export }, + export2 => q{$_[3] houve um erro ao exportar a msg $_[0] para $_[1] ($_[2])}, + export3 => q{$_[2 ] msg $_[0] exportada para $_[1]}, + filter1 => q{Filtro $_[0] actualizado para $_[1]}, + filter2 => q{Filtro de palavra chave $_[0] desconhecido}, + filter3 => q{Nenhuns filtros definidos para $_[0]}, + filter4 => q{$_[0]$_[1] Filtro $_[2] apagado para $_[3]}, + filter5 => q{preciso de alguns comandos de filtro...}, + filter6 => q{$_[0]$_[1] Filtro para $[2] no encontrado}, + grids => q{Grelha de DX activado para $_[0]}, + gridu => q{Grelha de DX desactivado para $_[0]}, + illcall => q{Desculpe, $_[0] um indicativo invlido}, + hasha => q{$_[0] j existe em $_[1]}, + hashb => q{$_[0] adicionado para $_[1]}, + hashc => q{$_[0] removido de $_[1]}, + hashd => q{$_[0] no em $_[1]'}, + hashe => q{$_[0] definido em $_[1]'}, + helpe1 => q{Sistema de ajuda no disponivel, diga ao sysop}, + helpe2 => q{Nenhuma ajuda disponivel em $_[0]}, + heres => q{Aqui definido em $_[0]}, + heade1 => q{Usando $main::mycall coords, considere fazer um set/location ou set/qra}, + hereu => q{Aqui no definido em $_[0]}, + homebbs => q{BBS local definida como: $_[0]}, + homenode => q{Node local definido como: $_[0]}, + hnodee1 => q{Por favor escreva o seu node local, set/homenode }, + hnodee2 => q{Falha ao definir o node local em $_[0]}, + hnode => q{O seu node local agora "$_[0]"}, + init1 => q{enviar mensagem de inicializao para $_[0]}, + iso => q{$_[0] Isolado}, + isou => q{$_[0] No isolado}, + isoc => q{$_[0] criado e isolado}, + isoari => q{h um filtro de rota entrado para $_[0]; clear/route input $_[0] primeiro}, + isoaro => q{h um filtro de rota saido para $_[0]; clear/route $_[0] primeiro}, + isow => q{$_[0] est isolado; unset/isolate $_[0] primeiro}, + join => q{a juntar ao grupo $_[0]}, + l1 => q{Desculpe $_[0], voc est ligado noutro canal}, + l2 => q{Ol $_[0], isto $main::mycall em $main::myqth\nrunning DXSpider V$main::version build $main::build}, + lang => q{Linguagem agora o Portugus}, + lange1 => q{set/language aonde uma de ($_[0])}, + lange2 => q{falha ao definir uma lngua em $_[0]'}, + leave => q{a deixar o grupo $_[0]}, + lh1 => q{$main::data/hop_table.pl no existe}, + loce1 => q{Por favor diga as suas coordenadas,, set/location }, + loce2 => q{No reconhece "$_[0]" como uma Lat/Long (ex 52 20 N 0 16 E)}, + loce3 => q{$_[0] um locator, por favor use: set/qra $_[0]}, + loc => q{A sua lat/long agora "$_[0]"}, + lockout => q{$_[0] Fechado}, + lockoutc => q{$_[0] Criado e fechado}, + lockoutun => q{$_[0] Aberto}, + lockoutuse => q{uso: sh/lockout |ALL}, + loginu => q{Usurio $_[0] ligou}, + logoutu => q{Usurio $_[0] desligou-se}, + loginn => q{Node $_[0] ligou}, + logoutn => q{Node $_[0] desligou}, + m1 => q{Escrever o ttulo (30 caracteres):}, + m2 => q{Cpia da msg $_[0] enviada para $_[1]}, + m3 => q{Desculpe, $_[0] o endereo inaceitvel}, + m4 => q{Desculpe, no pode aceder mensagem $_[0]}, + m5 => q{Desculpe, eu preciso do nmero da mensagem'}, + m6 => q{Responder a: $_[0]}, + m7 => q{Ttulo : $_[0]}, + m8 => q{Escrever a mensagem /EX para enviar ou /ABORT para sair}, + m9 => q{Uma nova mensagem chegou para si}, + m10 => q{Mensagem abortada}, + m11 => q{Mensagem nmero $_[0] guardada e enviada para $_[1]}, + m12 => q{Mensagem nmero $_[0] apagada}, + m13 => q{Mensagem nmero $_[0] desaparecida}, + m14 => q{Mensagem nmero $_[0] marcada como enviada para $_[1]}, + m15 => q{Mensagem nmero $_[0] desmarcada como enviada para $_[1]}, + m16 => q{Preciso do nmero da mensagem}, + m17 => q{Desculpe, no posso enviar mensagens no modo $_[0]}, + m18 => q{Desculpe, a mensagem $_[0] est actualmente definida como KEEP}, + msg1 => q{Filas das mensagens de boletins}, + msg2 => q{Filas das mensagens privadas}, + msg3 => q{Mensagem $_[0]: $_[1] alterada de $_[2] para $_[3]}, + msgu => q{uso: msg data...}, + merge1 => q{Submeter pedido para $_[1] spots e $_[2] WWV enviado para $_[0]}, + moon => q{Localizao dd/mm/yyyy Subir Definido}, + moon_with_azel => q{Localizao dd/mm/yyyy Subir Definido Azim Elev}, + mond => q{Monitorizao desactivada}, + mone => q{Monitorizao activada}, + namee1 => q{Por favor escreva o seu nome, set/name }, + namee2 => q{No encontro o usurio $_[0]!}, + name => q{O seu nome "$_[0]"}, + nodea => q{$_[0] definido como um node tipo AK1A}, + nodeac => q{$_[0] criado como um node tipo AK1A}, + nodeb => q{$_[0] definido como BBS}, + nodebc => q{$_[0] criado como BBS}, + nodec => q{$_[0] definido como um node tipo CLX}, + nodecc => q{$_[0] criado como um node tipo CLX}, + noder => q{$_[0] definido como um node tipo AR-Cluster}, + noderc => q{$_[0] criado como um node tipo AR-Cluster}, + nodes => q{$_[0] definido como um node tipo DXSpider}, + nodesc => q{$_[0] criado como um node tipo DXSpider}, + nodex => q{$_[0] definido como um node tipo DXNET}, + nodexc => q{$_[0] criado como um node tipo DXNET}, + nodeu => q{$_[0] definido como um usurio}, + nodee1 => q{Voc no pode usar este comando enquanto o seu alvo ($_[0]) est ligado}, + notdone => q{No foi feito}, + nothere => q{Desculpe, mas $_[0] no est aqui de momento, por favor tente mais tarde'}, + obscount => q{Ping obsolescence conta como $_[0] definido para $_[1]}, + ok => q{Operao bem sucedida}, + outconn => q{Ligao exterior para $_[0]}, + page => q{Prima no Enter para continuar, A para abortar ($_[0] linhas) >}, + pagelth => q{O tamanho da pgina agora de $_[0]}, + passerr => q{Por favor use: SET/PASS }, + passphrase => q{Passphrase definida ou alterada por $_[0]}, + passphraseu => q{Passphrase removida por $_[0]}, + password => q{Password definida ou alterada por $_[0]}, + passwordu => q{Password removida por $_[0]}, + pc90s => q{PC90 activado por $_[0]}, + pc90u => q{PC90 desactivado $_[0]}, + pingo => q{Ping comeou para $_[0]}, + pingi => q{Ping retornado de $_[0] $_[1] (Ave $_[2]) segundos}, + pinge1 => q{No pode fazer ping para si prprio!}, + pingint => q{Intervalo de Ping em $_[0] definido para $_[1] segundos}, + 'pos' => q{Do indicativo: $_[0] Lat: $_[1] Long: $_[2]}, + prs => q{Prompt agora definida para "$_[0]"}, + pru => q{Prompt agora regressou para a default}, + priv => q{Nivel de privilgio alterado em $_[0]}, + prx => q{$main::mycall >}, + pw0 => q{Escreva a password antiga: }, + pw1 => q{Escreva a password nova: }, + pw2 => q{Escreva novamente a nova password: }, + pw3 => q{Password alterada}, + pw4 => q{As Passwordes diferem, a password NO foi alterada}, + qll => q{Por favor escreva a sua localizao com set/location ou set/qra}, + qthe1 => q{Por favor escreva o seu QTH, set/qth }, + qth => q{O seu QTH "$_[0]"}, + qrae1 => q{Por favor escreva o seu locator, set/qra (ex set/qra IM58LP)}, + qrashe1 => q{Por favor escreva o seu locator, ex sh/qra IM58LP ou sh/qra IM58LP IO93NS}, + qrae2 => q{No reconhece "$_[0]" como um locator (ex IM58LP)}, + qra => q{O seu locator "$_[0]"}, + qsl1 => q{Call Manager Times Last Time Seen De}, + rcmdo => q{RCMD "$_[0]" enviado para $_[1]}, + read1 => q{Desculpe, nenhuma mensagem nova para voc}, + read2 => q{Msg $_[0] no foi encontrada}, + read3 => q{Msg $_[0] no est disponivel}, + rec => q{$_[0] registos}, + reg => q{$_[0] registados}, + regc => q{$_[0] criado e registado}, + reginac => q{O registo no est activo (set/var \$main::reqreg = 1 para activar)}, + regun => q{$_[0] no registado}, + route => q{$_[0] em $_[1] via $_[2]}, + sat1 => q{Tabela de rbitras para $_[0] para a prxima $_[1] horas em todos os $_[2] mins}, + sat2 => q{dd/mm UTC Lat Lon Alt Km Az El Dist Km}, + sat3 => q{Sintaxe: SH/SAT [ ]}, + sat4 => q{Satlites disponiveis/Idade das rbitras (dias):-}, + sat5 => q{preciso nnnnn.AMSAT no ttulo para carregar as rbitras desde esta mensagem}, + satnf => q{Satlite $_[0] desconhecido}, + satdisc => q{-----}, + set => q{$_[0] activado por $_[1]}, + sethop1 => q{uso: set/hops ann|spots|wwv|wcy }, + sethop2 => q{$_[0] saltos definidos em $_[1]$_[2] por $_[3]'}, + sethop3 => q{Nenhuns saltos definidos por $_[0]'}, + shu => q{"SHU" no suficiente! voc precisa pelo menos de "SHUT" para desligar o node}, + shutting => q{$main::mycall a desligar...}, + sloc => q{Cluster lat $_[0] long $_[1], NO ESQUECER DE ALTERAR O SEU DXVars.pm}, + snode1 => q{Node Call Sort Verso}, + snode2 => q{$_[0] $_[1] $_[2]}, + snode3 => q{$_[0] indicativo desconhecido}, + sqra => q{Cluster locator$_[0], NO ESQUECER DE ALTERAR O SEU DXVars.pm}, + sorry => q{Desculpe}, + spf1 => q{spoof: criando um novo usurio $_[0]}, + stathf => q{HF DX Spot Stats, ltimo $_[1] dias de $_[0]}, + stathft => q{HF DX Spot Stats, ltimo $_[2] dias de $_[1] por DXCC $_[0]}, + statvhf => q{VHF+ DX Spot Stats, ltimo $_[1] dias de $_[0]}, + statvhft => q{VHF+ DX Spot Stats, ltimo $_[2] dias de $_[1] por DXCC $_[0]}, + statdx => q{Total DX Spots por $_[1] dias de $_[0]}, + sun => q{Localizao dd/mm/yyyy Subir Definido}, + sun_with_azel => q{Localizao dd/mm/yyyy Subir Definido Azim Elev}, + susdb1 => q{uso: indicativo da cidade do estado}, + susdb2 => q{USDB $_[0] foi $_[1], $_[2]}, + susdb3 => q{USDB $_[0] agora $_[1], $_[2]}, + susdb4 => q{USDB $_[0] apagado}, + suser1 => q{uso: indicativo valor user_field_name}, + suser2 => q{Usurio $_[0] no foi encontrado}, + suser3 => q{Campo do usurio '$_[0]' fooi '$_[1]' agora definido para '$_[2]'}, + suser4 => q{O campo de nome do usurio '$_[0]' no existe}, + time1 => q{Tempo local: $_[0] $_[1], UTC $_[2]}, + time2 => q{$_[0] Tempo local (standard): $_[1] ($_[2] Horas)}, + time3 => q{$_[0] $_[1]}, + talks => q{QSO activado por $_[0]}, + talku => q{QSO desactivado por $_[0]}, + talkend => q{Conversao acabada para si}, + talkinst => q{A entrar no mode de conversao, /EX para terminar, / para correr como um comando}, + talknh => q{Desculpe $_[0] no est ligado de momento}, + talkprompt => q{Conversar ($_[0])>}, + talkstart => q{A comear a conversao para si}, + unset => q{$_[0] desactivado por $_[1]}, + unsethop1 => q{uso: unset/hops ann|spots|wwv|wcy}, + unsethop2 => q{saltos no definidos em $_[1] por $_[0]'}, + usernf => q{*** Registo de usurio por $_[0] no foi encontrado ***}, + usstates => q{Mostrar estados dos EUA activado por $_[0]}, + usstateu => q{Desactivar os estados dos EUA por $_[0]}, + wcy1 => q{$_[0] est desaparecido ou fora de alcance}, + wcy2 => q{WCY duplicado}, + wcys => q{WCY enabled for $_[0]}, + wcyu => q{WCY desactivado por $_[0]}, + wpc16s => q{Permite o PC16 de $_[0] activado}, + wpc16u => q{Permite o PC16 de $_[0] desactivado}, + wpc19s => q{Rota PC19 por $_[0] activado}, + wpc19u => q{Rota PC19 por $_[0] desactivado}, + wwv1 => q{$_[0] est desaparecido ou fora de alcance}, + wwv2 => q{WWV duplicado}, + wwvs => q{WWV activado por $_[0]}, + wwvu => q{WWV desactivado $_[0]}, + wxs => q{WX activado por $_[0]}, + wxu => q{WX desactivado por $_[0]}, }, -); + ); diff --git a/perl/Prefix.pm b/perl/Prefix.pm index 2fab0e0b..83b0ac40 100644 --- a/perl/Prefix.pm +++ b/perl/Prefix.pm @@ -472,17 +472,17 @@ sub cty_data } my %valid = ( + city => '0,City', + cont => '0,Continent', + cq => '0,CQ', + dxcc => '0,DXCC', + itu => '0,ITU', lat => '0,Latitude,slat', long => '0,Longitude,slong', - dxcc => '0,DXCC', name => '0,Name', - itu => '0,ITU', - cq => '0,CQ', + qra => '0,Locator', state => '0,State', - city => '0,City', utcoff => '0,UTC offset', - cont => '0,Continent', - qra => '0,Locator', ); sub AUTOLOAD diff --git a/perl/Prot.pm b/perl/Prot.pm index 27416735..89847c48 100644 --- a/perl/Prot.pm +++ b/perl/Prot.pm @@ -12,28 +12,28 @@ use DXDebug; use vars qw(%valid); %valid = ( - fromnode => '0,From Node', - tonode => '0,To Node', - vianode => '0,Via Node', - origin => '0,Original Node', - tocall => '0,To Callsign', - fromcall => '0,From Callsign', - hops => '0,No. of hops', - text => '0,Text', + bellflag => '0,Bell?', datetime => '0,Date/Time,atime', - freq => '0,Frequency', dxcall => '0,DX Callsign', - sort => '0,Sort', + dxcount => '0,DX Count', + freq => '0,Frequency', + fromcall => '0,From Callsign', + fromnode => '0,From Node', hereflag => '0,Here?,yesno', - talkflag => '0,Talk mode', - bellflag => '0,Bell?', + hops => '0,No. of hops', + nodelist => '0,Node List,parray', + origin => '0,Original Node', privflag => '0,Private?,yesno', rrflag => '0,RR Req.?,yesno', + sort => '0,Sort', sysopflag => '0,Sysop flag', - dxcount => '0,DX Count', - wwvcount => '0,WWV Count', + talkflag => '0,Talk mode', + text => '0,Text', + tocall => '0,To Callsign', + tonode => '0,To Node', version => '0,Node Version', - nodelist => '0,Node List,parray', + vianode => '0,Via Node', + wwvcount => '0,WWV Count', ); diff --git a/perl/QSL.pm b/perl/QSL.pm index f62897bf..1fd7130b 100644 --- a/perl/QSL.pm +++ b/perl/QSL.pm @@ -120,6 +120,7 @@ sub get return decode($value); } + sub put { return unless $dbm; diff --git a/perl/Route.pm b/perl/Route.pm index 304b9c68..a8820ea4 100644 --- a/perl/Route.pm +++ b/perl/Route.pm @@ -25,15 +25,15 @@ use strict; use vars qw(%list %valid $filterdef $maxlevel); %valid = ( - parent => '0,Parent Calls,parray', call => "0,Callsign", - flags => "0,Flags,phex", + city => '0,City', + cq => '0,CQ Zone', dxcc => '0,Country Code', + flags => "0,Flags,phex", + ip => '0,IP Address', itu => '0,ITU Zone', - cq => '0,CQ Zone', + parent => '0,Parent Calls,parray', state => '0,State', - city => '0,City', - ip => '0,IP Address', ); $filterdef = bless ([ diff --git a/perl/Route/Node.pm b/perl/Route/Node.pm index 4aa8be9e..348bb5b1 100644 --- a/perl/Route/Node.pm +++ b/perl/Route/Node.pm @@ -21,19 +21,20 @@ use vars qw(%list %valid @ISA $max $filterdef $obscount); @ISA = qw(Route); %valid = ( - nodes => '0,Nodes,parray', - users => '0,Users,parray', - usercount => '0,User Count', - version => '0,Version', + K => '9,Seen on PC92K,yesno', + PC92C_dxchan => '9,PC92C hops,phash', build => '0,Build', + do_pc9x => '0,Uses pc9x,yesno', handle_xml => '0,Using XML,yesno', - lastmsg => '0,Last Route Msg,atime', + last_PC92C => '9,Last PC92C', lastid => '0,Last Route MsgID', - do_pc9x => '0,Uses pc9x,yesno', - via_pc92 => '0,In via pc92?,yesno', + lastmsg => '0,Last Route Msg,atime', + nodes => '0,Nodes,parray', obscount => '0,Obscount', - last_PC92C => '9,Last PC92C', - PC92C_dxchan => '9,PC92C hops,phash', + usercount => '0,User Count', + users => '0,Users,parray', + version => '0,Version', + via_pc92 => '0,In via pc92?,yesno', ); $filterdef = $Route::filterdef; diff --git a/perl/Spot.pm b/perl/Spot.pm index 89fdec5b..f4b5f3cd 100644 --- a/perl/Spot.pm +++ b/perl/Spot.pm @@ -347,6 +347,7 @@ sub search dbg("Spot::search hint='$hint', expr='$expr', spotno=$from-$to, day=$dayfrom-$dayto\n") if isdbg('search'); # build up eval to execute + dbg("Spot::search Spot eval: $expr") if isdbg('searcheval'); $expr =~ s/\$r/\$_[0]/g; my $eval = qq{ sub { return $expr; } }; @@ -354,7 +355,6 @@ sub search my $ecode = eval $eval; return ("Spot search error", $@) if $@; - my $fh; my $now = $fromdate; my $today = Julian::Day->new($main::systime); diff --git a/perl/SysVar.pm b/perl/SysVar.pm index 37da05b2..7dba2bea 100644 --- a/perl/SysVar.pm +++ b/perl/SysVar.pm @@ -32,3 +32,5 @@ $userfn = "$local_data/users"; # the "message of the day" file $motd = "motd"; + +1; diff --git a/perl/cluster.pl b/perl/cluster.pl index bfd637c5..d471b71b 100755 --- a/perl/cluster.pl +++ b/perl/cluster.pl @@ -31,6 +31,17 @@ use vars qw($root $is_win $systime $lockfn @inqueue $starttime $lockfn @outstand #$no = 'No'; # ditto for no #$user_interval = 11*60; # the interval between unsolicited prompts if no traffic +package main; + +# set default paths, these should be overwritten by DXVars.pm +use vars qw($data $system $cmd $localcmd $userfn $clusteraddr $clusterport $yes $no $user_interval $lang $local_data); + +$lang = 'en'; # default language +$yes = 'Yes'; # visual representation of yes +$no = 'No'; # ditto for no +$user_interval = 11*60; # the interval between unsolicited prompts if no traffic + + # make sure that modules are searched in the order local then perl BEGIN { umask 002; @@ -62,8 +73,13 @@ BEGIN { mkdir "$root/local_cmd", 02774 unless -d "$root/local_cmd"; # locally stored data lives here - my $local_data = "$root/local_data"; + $local_data = "$root/local_data"; mkdir $local_data, 02774 unless -d $local_data; + $data = "$root/data"; + $system = "$root/sys"; + $cmd = "$root/cmd"; + $localcmd = "$root/local_cmd"; + $userfn = "$data/users"; # try to create and lock a lockfile (this isn't atomic but # should do for now @@ -152,7 +168,7 @@ use DXSql; use IsoTime; use BPQMsg; use RBN; - +use DXCIDR; use Data::Dumper; use IO::File; @@ -174,6 +190,8 @@ $no //= 'No'; # ditto for no $user_interval //= 11*60; # the interval between unsolicited prompts if no traffic +$clusteraddr //= '127.0.0.1'; # cluster tcp host address - used for things like console.pl +$clusterport //= 27754; # cluster tcp port @inqueue = (); # the main input queue, an array of hashes $systime = 0; # the time now (in seconds) $starttime = 0; # the starting time of the cluster @@ -206,6 +224,8 @@ our $cldsecs; # the amount of cpu time any child processes have consumed our $allowslashcall; # Allow / in connecting callsigns (ie PA0/G1TLH, or even PA0/G1TLH/2) +use vars qw($version $subversion $build $gitversion $gitbranch); + # send a message to call on conn and disconnect sub already_conn { @@ -489,7 +509,6 @@ sub AGWrestart sub setup_start { - ############################################################# # # The start of the main line of code @@ -565,6 +584,7 @@ sub setup_start $SIG{__DIE__} = $w; } + # setup location of motd & issue localdata_mv($motd); $motd = localdata($motd); @@ -619,6 +639,7 @@ sub setup_start } } + # start listening for incoming messages/connects dbg("starting listeners ..."); my $conn = IntMsg->new_server($clusteraddr, $clusterport, \&login); @@ -636,6 +657,7 @@ sub setup_start dbg("External Port: $l->[0] $l->[1] using ${pkg}::${login}"); } + dbg("AGW Listener") if $AGWMsg::enable; AGWrestart(); @@ -653,6 +675,9 @@ sub setup_start $SIG{INT} = $SIG{TERM} = sub { $ending = 10; }; } + # get any bad IPs + DXCIDR::init(); + unless ($is_win) { $SIG{HUP} = 'IGNORE'; $SIG{CHLD} = sub { $zombies++ }; @@ -847,6 +872,7 @@ sub start_node Mojo::IOLoop->start unless Mojo::IOLoop->is_running; dbg("After Web::start_node"); + } setup_start(); diff --git a/perl/console.pl b/perl/console.pl index 3ad62001..c47b5076 100755 --- a/perl/console.pl +++ b/perl/console.pl @@ -14,8 +14,22 @@ # require 5.16.1; +use strict; use warnings; +our $root; +our $is_win; +our $myalias; +our $mycall; +our $clusteraddr; +our $clusterport; +our $maxshist; +our $maxkhist; +our $foreground; +our $background; +our $mycallcolor; +our @colors; + # search local then perl directories BEGIN { # root of directory tree for this system @@ -52,20 +66,34 @@ use Console; $clusteraddr //= '127.0.0.1'; $clusterport //= 27754; -$call = ""; # the callsign being used -$node = ""; # the node callsign being used -$conn = 0; # the connection object for the cluster -$lasttime = time; # lasttime something happened on the interface - -$connsort = "local"; -@kh = (); -@sh = (); -$kpos = 0; -$spos = $pos = $lth = 0; -$inbuf = ""; -$lastmin = 0; -$idle = 0; -$inscroll = 0; +our $call = ""; # the callsign being used +our $node = ""; # the node callsign being used +our $conn = 0; # the connection object for the cluster +our $lasttime = time; # lasttime something happened on the interface + +our $connsort = "local"; +our @kh = (); +our @sh = (); +our $kpos = 0; +our $inbuf = ""; +our $lastmin = 0; +our $idle = 0; +our $inscroll = 0; + +my $top; +my $bot; +my $lines; +my $scr; +my $cols; +my $pagel; +my $has_colors; +our $pos; +our $lth; +my $sh; + +our $spos = $pos = $lth = 0; + + #$SIG{WINCH} = sub {@time = gettimeofday}; @@ -505,8 +533,8 @@ sub on_connect { my $conn = shift; $conn->send_later("A$call|$connsort width=$cols enhanced"); - $conn->send_later("I$call|set/page $maxshist"); - #$conn->send_later("I$call|set/nobeep"); + $conn->send_later("I$call|set/page " . ($maxshist-5)); + $conn->send_later("I$call|set/nobeep"); } sub on_disconnect diff --git a/perl/create_prefix.pl b/perl/create_prefix.pl index d4d2aa20..72df12c1 100755 --- a/perl/create_prefix.pl +++ b/perl/create_prefix.pl @@ -18,6 +18,7 @@ BEGIN { unshift @INC, "$root/perl"; # this IS the right way round! unshift @INC, "$root/local"; + $data = "$root/data"; } use DXVars;