The DXSpider Installation and Administration Manual : The DXSpider command set

From: g0vgs Date: Sat, 3 Feb 2001 19:59:00 +0000 (+0000) Subject: add adminmanual-13.html X-Git-Tag: R_1_47_PRE1~13 X-Git-Url: http://dxcluster.org/gitweb/gitweb.cgi?a=commitdiff_plain;h=d4fae8e8553e669e47a345e2eafae645148479cc;p=spider.git add adminmanual-13.html --- diff --git a/html/adminmanual-13.html b/html/adminmanual-13.html new file mode 100644 index 00000000..0456275c --- /dev/null +++ b/html/adminmanual-13.html @@ -0,0 +1,2218 @@ + + + + + The DXSpider Installation and Administration Manual : The DXSpider command set + + + + + +Next +Previous +Contents +

13. The DXSpider command set

+ +

Below is a complete list of commands available from the cluster prompt. +Most maintenance tasks are automatic but there are some commands that are useful +for a sysop. These are listed below in alphabetical order. The number in +brackets following the command name is the permissions level needed to use +the command. +

13.1 accept/announce (0) +

+ +

accept/announce [0-9] <pattern> Set an accept filter +line for announce +

Create an 'accept this announce' line for a filter. +

An accept filter line means that if the announce matches this filter it is +passed onto the user. See HELP FILTERS for more info. Please read this +to understand how filters work - it will save a lot of grief later on. +

You can use any of the following things in this line:- +


++  info <string>            eg: iota or qsl
+  by <prefixes>            eg: G,M,2         
+  origin <prefixes>
+  origin_dxcc <numbers>    eg: 61,62 (from eg: sh/pre G)
+  origin_itu <numbers>
+  origin_zone <numbers>
+  by_dxcc <numbers>
+  by_itu <numbers>
+  by_zone <numbers>
+  channel <prefixes>
+  wx 1                     filter WX announces
+  dest <prefixes>          eg: 6MUK,WDX      (distros)
+
+

some examples:- +


++  acc/ann dest 6MUK
+  acc/ann 2 by_zone 14,15,16
+  (this could be all on one line: acc/ann dest 6MUK or by_zone 14,15,16)
+
+

or +


++  acc/ann by G,M,2 
+
+

This filter would only allow announces that were posted buy UK stations. +You can use the tag 'all' to accept everything eg: +


++  acc/ann all
+
+

but this probably for advanced users... +

13.2 accept/announce (extended for sysops) (8) +

+ +

accept/announce <call> [input] [0-9]<pattern> Announce filter sysop version +

This version allows a sysop to set a filter for a callsign as well as the +default for nodes and users eg:- +


++  accept/ann by G,M,2
+  accept/ann input node_default by G,M,2
+  accept/ann user_default by G,M,2
+
+

13.3 accept/spots (0) +

+ +

accept/announce [0-9] <pattern> Set an accept filter line for spots +

Create an 'accept this spot' line for a filter. +

An accept filter line means that if the spot matches this filter it is +passed onto the user. See HELP FILTERS for more info. Please read this +to understand how filters work - it will save a lot of grief later on. +

You can use any of the following things in this line:- +


++  freq <range>           eg: 0/30000 or hf or hf/cw or 6m,4m,2m
+  on <range>             same as 'freq'
+  call <prefixes>        eg: G,PA,HB9
+  info <string>          eg: iota or qsl
+  by <prefixes>            
+  call_dxcc <numbers>    eg: 61,62 (from eg: sh/pre G)
+  call_itu <numbers>
+  call_zone <numbers>
+  by_dxcc <numbers>
+  by_itu <numbers>
+  by_zone <numbers>
+  origin <prefixes>
+  channel <prefixes>
+
+

For frequencies, you can use any of the band names defined in +SHOW/BANDS and you can use a subband name like: cw, rtty, data, ssb - +thus: hf/ssb. You can also just have a simple range like: 0/30000 - +this is more efficient than saying simply: freq HF (but don't get +too hung up about that) +

some examples:- +


++  acc/spot 1 on hf/cw
+  acc/spot 2 on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
+
+

You can use the tag 'all' to accept everything, eg: +


++  acc/spot 3 all
+
+

but this probably for advanced users... +

13.4 accept/spots (extended for sysops) (8) +

+ +

accept/spots <call> [input] [0-9] <pattern> Spot filter sysop version +

This version allows a sysop to set a filter for a callsign as well as the +default for nodes and users eg:- +


++  accept/spot db0sue-7 1 by_zone 14,15,16
+  accept/spot node_default all
+  set/hops node_default 10
+
+  accept/spot user_default by G,M,2
+
+

13.5 accept/wcy (0) +

+ +

accept/wcy [0-9] <pattern> set an accept WCY filter +

It is unlikely that you will want to do this, but if you do then you can +filter on the following fields:- +


++  by <prefixes>            eg: G,M,2         
+  origin <prefixes>
+  origin_dxcc <numbers>    eg: 61,62 (from eg: sh/pre G)
+  origin_itu <numbers>
+  origin_zone <numbers>
+  by_dxcc <numbers>
+  by_itu <numbers>
+  by_zone <numbers>
+  channel <prefixes>
+
+

There are no examples because WCY Broadcasts only come from one place and +you either want them or not (see UNSET/WCY if you don't want them). +

This command is really provided for future use. +

See HELP FILTER for information. +

13.6 accept/wcy (extended for sysops) (8) +

+ +

accept/wcy <call> [input] [0-9] <pattern> +WCY filter sysop version +

This version allows a sysop to set a filter for a callsign as well as the +default for nodes and users eg:- +


++  accept/wcy node_default all
+  set/hops node_default 10
+
+

13.7 accept/wwv (0) +

+ +

accept/wwv [0-9] <pattern> Set an accept WWV filter +

It is unlikely that you will want to do this, but if you do then you can +filter on the following fields:- +


++  by <prefixes>            eg: G,M,2         
+  origin <prefixes>
+  origin_dxcc <numbers>    eg: 61,62 (from eg: sh/pre G)
+  origin_itu <numbers>
+  origin_zone <numbers>
+  by_dxcc <numbers>
+  by_itu <numbers>
+  by_zone <numbers>
+  channel <prefixes>
+
+

for example +


++  accept/wwv by_zone 4
+
+

is probably the only useful thing to do (which will only show WWV broadcasts +by stations in the US). +

See HELP FILTER for information. +

13.8 accept/wwv (extended for sysops) (8) +

+ +

accept/wwv <call> [input] [0-9] <pattern> +WWV filter sysop version +

This version allows a sysop to set a filter for a callsign as well as the +default for nodes and users eg:- +


++  accept/wwv db0sue-7 1 by_zone 4
+  accept/wwv node_default all
+  set/hops node_default 10
+
+  accept/wwv user_default by W,K
+
+

13.9 announce (0) +

+ +

announce <text> Send an announcement to local users +

Send an announcement to LOCAL users only, where <text> is the text +of the announcement you wish to broadcast +

13.10 announce full (0) +

+ +

announce full <text> Send an announcement cluster wide +

This command will send your announcement across the whole cluster +network. +

13.11 announce sysop (5) +

+ +

announce sysop <text> +

Send an announcement to Sysops only +

13.12 apropos (0) +

+ +

apropos <string> Search the help database +

Search the help database for <string> (it isn't case sensitive), +and print the names of all the commands that may be relevant. +

13.13 bye (0) +

+ +

bye Exit from the cluster +

This will disconnect you from the cluster +

13.14 catchup (5) +

+ +

catchup <node_call> All|[<msgno> ...] Mark a message as sent +

When you send messages the fact that you have forwarded it to another node +is remembered so that it isn't sent again. When you have a new partner +node and you add their callsign to your /spider/msg/forward.pl file, all +outstanding non-private messages will be forwarded to them. This may well +be ALL the non-private messages. You can prevent this by using these +commmands:- +


++  catchup GB7DJK all
+  catchup GB7DJK 300 301 302 303 500-510
+
+

and to undo what you have just done:- +


++  uncatchup GB7DJK all
+  uncatchup GB7DJK 300 301 302 303 500-510
+
+

which will arrange for them to be forward candidates again. +

Order is not important. +

13.15 clear/spots (0) +

+ +

clear/spots [1|all] Clear a spot filter line +

This command allows you to clear (remove) a line in a spot filter or to +remove the whole filter. +

If you have a filter:- +


++  acc/spot 1 on hf/cw
+  acc/spot 2 on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
+
+

and you say:- +


++  clear/spot 1
+
+

you will be left with:- +


++  acc/spot 2 on vhf and (by_zone 14,15,16 or call_zone 14,15,16)
+
+

If you do: +


++  clear/spot all
+
+

the filter will be completely removed. +

13.16 connect (5) +

+ +

connect <callsign> Start a connection to another DX Cluster +

Start a connection process that will culminate in a new connection to the +DX cluster <callsign>. This process creates a new 'client' process which will +use the script in /spider/connect/<callsign> to effect the 'chat' exchange +necessary to traverse the network(s) to logon to the cluster <callsign>. +

13.17 dbavail (0) +

+ +

dbavail Show a list of all the databases in the system +

The title says it all really, this command lists all the databases defined +in the system. It is also aliased to SHOW/COMMAND. +

13.18 dbcreate (9) +

+ +

dbcreate <name> Create a database entry +dbcreate <name> chain <name> [<name>..] Create a chained database entry +dbcreate <name> remote <node> Create a remote database +entry +

DBCREATE allows you to define a database in the system. It doesn't actually +create anything, just defines it. +

The databases that are created are simple DB_File hash databases, they are +therefore already 'indexed'. +

You can define a local database with the first form of the command eg: +

DBCREATE oblast +

You can also chain databases with the addition of the 'chain' keyword. +This will search each database one after the other. A typical example +is: +

DBCREATE sdx_qsl chain sql_ad +

No checking is done to see if the any of the chained databases exist, in +fact it is usually better to do the above statement first then do each of +the chained databases. +

Databases can exist offsite. To define a database that lives on another +node do: +

DBCREATE buckmaster remote gb7dxc +

Remote databases cannot be chained; however, the last database in a +a chain can be a remote database eg: +

DBCREATE qsl chain gb7dxc +

To see what databases have been defined do: +

DBAVAIL (or it will have been aliased to SHOW/COMMAND) +

It would be normal for you to add an entry into your local Aliases file +to allow people to use the 'SHOW/<dbname>' style syntax. So you would +need to add a line like:- +


++  's' => [
+    ..
+    ..
+    '^sh\w*/buc', 'dbshow buckmaster', 'dbshow',
+    ..
+    ..
+   ],
+
+

to allow +

SH/BUCK g1tlh +

to work as they may be used to. +

See DBIMPORT for the importing of existing AK1A format data to databases. +See DBSHOW for generic database enquiry +

13.19 dbimport (9) +

+ +

dbimport <dbname> Import AK1A data into a database +

If you want to import or update data in bulk to a database you can use +this command. It will either create or update entries into an existing +database. For example:- +

DBIMPORT oblast /tmp/OBLAST.FUL +

will import the standard OBLAST database that comes with AK1A into the +oblast database held locally. +

13.20 dbremove (9) +

+ +

dbremove <dbname> Delete a database +

DBREMOVE will completely remove a database entry and also delete any data +file that is associated with it. +

There is no warning, no comeback, no safety net. +

For example: +

DBREMOVE oblast +

will remove the oblast database from the system and it will also remove +the associated datafile. +

I repeat: +

There is no warning, no comeback, no safety net. +

You have been warned. +

13.21 dbshow (0) +

+ +

dbshow <dbname> <key> Display an entry, if it exists, in a database +

This is the generic user interface to the database to the database system. +It is expected that the sysop will add an entry to the local Aliases file +so that users can use the more familiar AK1A style of enquiry such as: +


++  SH/BUCK G1TLH
+
+

but if he hasn't and the database really does exist (use DBAVAIL or +SHOW/COMMAND to find out) you can do the same thing with: +


++  DBSHOW buck G1TLH
+
+

13.22 debug (9) +

+ +

debug Set the cluster program into debug mode +

Executing this command will only have an effect if you are running the cluster +in debug mode i.e. +


++        perl -d cluster.pl
+
+

It will interrupt the cluster just after the debug command has finished. +

13.23 directory (0) +

+ +

directory List messages directory all List all messages +directory own List your own messages +directory new List all new messages +directory to <call> List all messages to <call> +directory from <call> List all messages from <call> +directory subject <string> List all messages with <string> in subject +directory <nn> List last <nn> messages +directory <from>-<to> List messages <from> message <to> message +

List the messages in the messages directory. +

If there is a 'p' one space after the message number then it is a +personal message. If there is a '-' between the message number and the +'p' then this indicates that the message has been read. +

You can use shell escape characters such as '*' and '?' in the <call> +fields. +

You can combine some of the various directory commands together eg:- +


++   DIR TO G1TLH 5
+or 
+   DIR SUBJECT IOTA 200-250
+
+

You can abbreviate all the commands to one letter and use ak1a syntax:- +


++   DIR/T G1* 10
+   DIR/S QSL 10-100 5
+
+

13.24 directory (extended for sysops) (5) +

+ +

Works just like the user command except that sysops can see ALL messages. +

13.25 disconnect (8) +

+ +

disconnect <call> [<call> ...] Disconnect a user or node +

Disconnect any <call> connected locally +

13.26 dx (0) +

+ +

dx [by <call>] <freq> <call> <remarks> Send a DX spot +

This is how you send a DX Spot to other users. You can, in fact, now +enter the <freq> and the <call> either way round. +


++   DX FR0G 144.600
+   DX 144.600 FR0G
+   DX 144600 FR0G 
+
+

will all give the same result. You can add some remarks to the end +of the command and they will be added to the spot. +


++   DX FR0G 144600 this is a test
+
+

You can credit someone else by saying:- +


++   DX by G1TLH FR0G 144.600 he isn't on the cluster
+
+

The <freq> is compared against the available bands set up in the +cluster. See SHOW/BANDS for more information. +

13.27 export (9) +

+ +

export <msgno> <filename> Export a message to a file +

Export a message to a file. This command can only be executed on a local +console with a fully privileged user. The file produced will be in a form +ready to be imported back into the cluster by placing it in the import +directory (/spider/msg/import). +

This command cannot overwrite an existing file. This is to provide some +measure of security. Any files written will owned by the same user as the +main cluster, otherwise you can put the new files anywhere the cluster can +access. For example:- +

EXPORT 2345 /tmp/a +

13.28 export_users (9) +

+ +

export_users [<filename>] Export the users database to ascii +

Export the users database to a file in ascii format. If no filename +is given then it will export the file to /spider/data/user_asc. +

If the file already exists it will be renamed to <filename>.o. In fact +up to 5 generations of the file can be kept each one with an extra 'o' on the +suffix. +

BE WARNED: this will write to any file you have write access to. No check is +made on the filename (if any) that you specify. +

13.29 forward/latlong (8) +

+ +

forward/latlong <node_call> Send latitude and longitude information to another cluster +

This command sends all the latitude and longitude information that your +cluster is holding against callsigns. One advantage of recieving this +information is that more locator information is held by you. This +means that more locators are given on the DX line assuming you have +set/dxgrid enabled. This could be a LOT of information though, so +it is not recommended on slow links. +

13.30 forward/opername (1) +

+ +

forward/opername <call> Send out information on this <call> to all clusters +

This command sends out any information held in the user file which can +be broadcast in PC41 protocol packets. This information is Name, QTH, Location +and Homenode. PC41s are only sent for the information that is available. +

13.31 help (0) +

+ +

help <cmd> Get help on a command +

All commands can be abbreviated, so SHOW/DX can be abbreviated +to SH/DX, ANNOUNCE can be shortened to AN and so on. +

Look at the APROPOS <string> command which will search the help database +for the <string> you specify and give you a list of likely commands +to look at with HELP. +

13.32 init (5) +

+ +

init <node call> Re-initialise a link to an AK1A compatible node +

This command attempts to re-initialise a link to a (usually) AK1A node +that has got confused, usually by a protocol loop of some kind. It may +work - but you usually will be better off simply disconnecting it (or +better, if it is a real AK1A node, doing an RCMD <node> DISC/F <your +node>). +

Best of luck - you will need it. +

13.33 kill (0) +

+ +

kill <msgno> [<msgno> ..] Delete a message from the local system +

Delete a message from the local system. You will only be able to +delete messages that you have originated or been sent (unless you are +the sysop). +

13.34 kill (5) +

+ +

kill <msgno> [<msgno> ...] Remove or erase a message from the system +kill from <call> Remove all messages from a callsign +kill to <call> Remove all messages to a callsign +

You can get rid of any message to or originating from your callsign using +this command. You can remove more than one message at a time. +

As a sysop you can kill any message on the system. +

13.35 kill full (5) +

+ +

kill full <msgno> [<msgno>] Delete a message from the whole cluster +

Delete a message (usually a 'bulletin') from the whole cluster system. +

This uses the subject field, so any messages that have exactly the same subject +will be deleted. Beware! +

13.36 links (0) +

+ +

links Show which nodes are physically connected +

This is a quick listing that shows which links are connected and +some information about them. See WHO for a list of all connections. +

13.37 load/aliases (9) +

+ +

load/aliases Reload the command alias table +

Reload the /spider/cmd/Aliases file after you have editted it. You will need to +do this if you change this file whilst the cluster is running in order for the +changes to take effect. +

13.38 load/baddx (9) +

+ +

load/baddx Reload the bad DX table +

Reload the /spider/data/baddx.pl file if you have changed it manually whilst +the cluster is running. This table contains the DX Calls that, if spotted, +will not be passed on. FR0G and TEST are classic examples. +

13.39 load/badmsg (9) +

+ +

load/badmsg Reload the bad message table +

Reload the /spider/msg/badmsg.pl file if you have changed it manually whilst +the cluster is running. This table contains a number of perl regular +expressions which are searched for in the fields targetted of each message. +If any of them match then that message is immediately deleted on receipt. +

13.40 load/badwords (9) +

+ +

load/badwords Reload the badwords file +

Reload the /spider/data/badwords file if you have changed it manually whilst +the cluster is running. This file contains a list of words which, if found +on certain text portions of PC protocol, will cause those protocol frames +to be rejected. It will all put out a message if any of these words are +used on the announce, dx and talk commands. The words can be one or +more on a line, lines starting with '#' are ignored. +

13.41 load/bands (9) +

+ +

load/bands Reload the band limits table +

Reload the /spider/data/bands.pl file if you have changed it manually whilst +the cluster is running. +

13.42 load/cmd_cache (9) +

+ +

load/cmd_cache Reload the automatic command cache +

Normally, if you change a command file in the cmd or local_cmd tree it will +automatially be picked up by the cluster program. Sometimes it can get confused +if you are doing a lot of moving commands about or delete a command in the +local_cmd tree and want to use the normal one again. Execute this command to +reset everything back to the state it was just after a cluster restart. +

13.43 load/forward (9) +

+ +

load/forward Reload the msg forwarding routing table +

Reload the /spider/msg/forward.pl file if you have changed it +manually whilst the cluster is running. +

13.44 load/messages (9) +

+ +

load/messages Reload the system messages file +

If you change the /spider/perl/Messages file (usually whilst fiddling/writing ne +commands) you can have them take effect during a cluster session by executing this +command. You need to do this if get something like :- +

unknown message 'xxxx' in lang 'en' +

13.45 load/prefixes (9) +

+ +

load/prefixes Reload the prefix table +

Reload the /spider/data/prefix_data.pl file if you have changed it manually +whilst the cluster is running. +

13.46 merge (5) +

+ +

merge <node> [<no spots>/<no wwv>] Ask for the latest spots and WWV +

MERGE allows you to bring your spot and wwv database up to date. By default +it will request the last 10 spots and 5 WWVs from the node you select. The +node must be connected locally. +

You can request any number of spots or wwv and although they will be appended +to your databases they will not duplicate any that have recently been added +(the last 2 days for spots and last month for WWV data). +

13.47 msg (9) +

+ +

msg <cmd> <msgno> [data ...] Alter various message parameters +

Alter message parameters like To, From, Subject, whether private or bulletin +or return receipt (RR) is required or whether to keep this message from timing +out. +


++  MSG TO <msgno> <call>     - change TO callsign to <call>
+  MSG FRom <msgno> <call>   - change FROM callsign to <call>
+  MSG PRrivate <msgno>      - set private flag
+  MSG NOPRrivate <msgno>    - unset private flag
+  MSG RR <msgno>            - set RR flag
+  MSG NORR <msgno>          - unset RR flag
+  MSG KEep <msgno>          - set the keep flag (message won't be deleted ever)
+  MSG NOKEep <msgno>        - unset the keep flag
+  MSG SUbject <msgno> <new> - change the subject to <new>
+  MSG WAittime <msgno>      - remove any waitting time for this message
+  MSG NOREad <msgno>        - mark message as unread
+  MSG REad <msgno>          - mark message as read
+  MSG QUeue                 - queue any outstanding bulletins
+  MSG QUeue 1               - queue any outstanding private messages
+
+

You can look at the status of a message by using:- +

STAT/MSG <msgno> +

This will display more information on the message than DIR does. +

13.48 pc (8) +

+ +

pc <call> <text> Send text (eg PC Protocol) to <call> +

Send some arbitrary text to a locally connected callsign. No processing is done on +the text. This command allows you to send PC Protocol to unstick things if problems +arise (messages get stuck etc). eg:- +

pc gb7djk PC33^GB7TLH^GB7DJK^400^ +

You can also use in the same way as a talk command to a connected user but +without any processing, added of "from <blah> to <blah>" or whatever. +

pc G1TLH Try doing that properly!!! +

13.49 ping (1) +

+ +

ping <node> Check the link quality between nodes +

his command allows you to send a frame to another cluster node on +the network and get a return frame. The time it takes to do this +is a good indication of the quality of the link. The actual time +it takes is output to the console in seconds. +Any visible cluster node can be PINGed. +

13.50 rcmd (1) +

+ +

rcmd <node call> <cmd> Send a command to another DX cluster +

This command allows you to send nearly any command to another DX Cluster +node that is connected to the system. +

Whether you get any output is dependant on a) whether the other system knows +that the node callsign of this cluster is in fact a node b) whether the +other system is allowing RCMDs from this node and c) whether you have +permission to send this command at all. +

13.51 read (0) +

+ +

read Read the next unread personal message addressed to you +read <msgno> Read the specified message +

You can read any messages that are sent as 'non-personal' and also any +message either sent by or sent to your callsign. +

13.52 read (extended for sysops) (5) +

+ +

read <msgno> Read a message on the system +

As a sysop you may read any message on the system +

13.53 reject/announce +

+ +

reject/announce [0-9] <pattern> Set a reject filter +for announce +

Create an 'reject this announce' line for a filter. +

An reject filter line means that if the announce matches this filter it is +passed onto the user. See HELP FILTERS for more info. Please read this +to understand how filters work - it will save a lot of grief later on. +

You can use any of the following things in this line:- +


++  info <string>            eg: iota or qsl
+  by <prefixes>            eg: G,M,2         
+  origin <prefixes>
+  origin_dxcc <numbers>    eg: 61,62 (from eg: sh/pre G)
+  origin_itu <numbers>
+  origin_zone <numbers>
+  by_dxcc <numbers>
+  by_itu <numbers>
+  by_zone <numbers>
+  channel <prefixes>
+  wx 1                     filter WX announces
+  dest <prefixes>          eg: 6MUK,WDX      (distros)
+
+

some examples:- +


++  rej/ann by_zone 14,15,16 and not by G,M,2
+
+

You can use the tag 'all' to reject everything eg: +


++  rej/ann all
+
+

but this probably for advanced users... +

13.54 reject/announce (extended for sysops) (8) +

+ +

reject/announce <call> [input] [0-9] <pattern> Announce filter sysop version +

This version allows a sysop to set a filter for a callsign as well as the +default for nodes and users eg:- +


++  reject/ann by G,M,2
+  reject/ann input node_default by G,M,2
+  reject/ann user_default by G,M,2
+
+

13.55 reject/spots (0) +

+ +

reject/spots [0-9] <pattern> Set a reject filter line for spots +

Create a 'reject this spot' line for a filter. +

A reject filter line means that if the spot matches this filter it is +dumped (not passed on). See HELP FILTERS for more info. Please read this +to understand how filters work - it will save a lot of grief later on. +

You can use any of the following things in this line:- +


++  freq <range>           eg: 0/30000 or hf or hf/cw or 6m,4m,2m
+  on <range>             same as 'freq'
+  call <prefixes>        eg: G,PA,HB9
+  info <string>          eg: iota or qsl
+  by <prefixes>            
+  call_dxcc <numbers>    eg: 61,62 (from eg: sh/pre G)
+  call_itu <numbers>
+  call_zone <numbers>
+  by_dxcc <numbers>
+  by_itu <numbers>
+  by_zone <numbers>
+  origin <prefixes>
+  channel <prefixes>
+
+

some examples:- +


++  rej/spot 1 on hf
+  rej/spot 2 on vhf and not (by_zone 14,15,16 or call_zone 14,15,16)
+
+

You can use the tag 'all' to reject everything eg: +


++  rej/spot 3 all
+
+

but this probably for advanced users... +

13.56 reject/spots (extended for sysops) (8) +

+ +

reject/spots <call> [input] [0-9] <pattern> +Reject spot filter sysop version +

This version allows a sysop to set a filter for a callsign as well as the +default for nodes and users eg:- +


++  reject/spot db0sue-7 1 by_zone 14,15,16
+  reject/spot node_default all
+  set/hops node_default 10
+
+  reject/spot user_default by G,M,2
+
+

13.57 reject/wcy (0) +

+ +

reject/wcy [0-9] <pattern> Set a reject WCY filter +

It is unlikely that you will want to do this, but if you do then you can +filter on the following fields:- +


++  by <prefixes>            eg: G,M,2         
+  origin <prefixes>
+  origin_dxcc <numbers>    eg: 61,62 (from eg: sh/pre G)
+  origin_itu <numbers>
+  origin_zone <numbers>
+  by_dxcc <numbers>
+  by_itu <numbers>
+  by_zone <numbers>
+  channel <prefixes>
+
+

There are no examples because WCY Broadcasts only come from one place and +you either want them or not (see UNSET/WCY if you don't want them). +

This command is really provided for future use. +

See HELP FILTER for information. +

13.58 reject/wcy (extended for sysops) (8) +

+ +

reject/wcy <call> [input] [0-9] <pattern> +WCY reject filter sysop version +

This version allows a sysop to set a filter for a callsign as well as the +default for nodes and users eg:- +

reject/wcy gb7djk all +

13.59 reject/wwv (0) +

+ +

reject/wwv [0-9] <pattern> Set a reject WWV filter +

It is unlikely that you will want to do this, but if you do then you can +filter on the following fields:- +


++  by <prefixes>            eg: G,M,2         
+  origin <prefixes>
+  origin_dxcc <numbers>    eg: 61,62 (from eg: sh/pre G)
+  origin_itu <numbers>
+  origin_zone <numbers>
+  by_dxcc <numbers>
+  by_itu <numbers>
+  by_zone <numbers>
+  channel <prefixes>
+
+

for example +


++  reject/wwv by_zone 14,15,16
+
+

is probably the only useful thing to do (which will only show WWV broadcasts +by stations in the US). +

See HELP FILTER for information. +

13.60 reject/wwv (extended for sysops) (8) +

+ +

reject/wwv <call> [input] [0-9] <pattern> +WWV reject filter sysop version +

This version allows a sysop to set a filter for a callsign as well as the +default for nodes and users eg:- +


++  reject/wwv db0sue-7 1 by_zone 4
+  reject/wwv node_default all
+
+  reject/wwv user_default by W
+
+

13.61 reply (0) +

+ +

reply Reply (privately) to the last message that you have read +reply <msgno> Reply (privately) to the specified message +reply B <msgno> Reply as a Bulletin to the specified message +reply NOPrivate <msgno> Reply as a Bulletin to the specified +message +reply RR <msgno> Reply to the specified message with read receipt +

You can reply to a message and the subject will automatically have +"Re:" inserted in front of it, if it isn't already present. +

You can also use all the extra qualifiers such as RR, PRIVATE, +NOPRIVATE, B that you can use with the SEND command (see SEND +for further details) +

13.62 send (0) +

+ +

send <call> [<call> ...] Send a message to one or more callsigns +send RR <call> Send a message and ask for a read receipt +send COPY <msgno> <call> Send a copy of a message to someone +send PRIVATE <call> Send a personal message +send NOPRIVATE <call> Send a message to all stations +

All the SEND commands will create a message which will be sent either to +an individual callsign or to one of the 'bulletin' addresses. +

SEND <call> on its own acts as though you had typed SEND PRIVATE, that is +it will mark the message as personal and send it to the cluster node that +that callsign is connected to. +

You can have more than one callsign in all of the SEND commands. +

You can have multiple qualifiers so that you can have for example:- +


++  SEND RR COPY 123 PRIVATE G1TLH G0RDI
+
+

which should send a copy of message 123 to G1TLH and G0RDI and you will +receive a read receipt when they have read the message. +

SB is an alias for SEND NOPRIVATE (or send a bulletin in BBS speak) +SP is an alias for SEND PRIVATE +

13.63 set/address (0) +

+ +

set/address <your_address> Record your postal address +

Literally, record your address details on the cluster. +

13.64 set/announce (0) +

+ +

set/announce Allow announce messages +

Allow announce messages to arrive at your terminal. +

13.65 set/arcluster (5) +

+ +

set/arcluster <node_call> [<node_call> ...] Make +the node_call an AR-Cluster type node +

Set the node_call as an AR-Cluster type node +

13.66 set/baddx (8) +

+ +

set/baddx <call> Stop words we do not wish to see in the callsign field +of a dx spot being propagated +

Setting a word as 'baddx' will prevent spots with that word in the callsign +field of a DX spot from going any further. They will not be displayed and they +will not be sent onto other nodes. +

The word must be wriiten in full, no wild cards are allowed eg:- +


++  set/baddx FORSALE VIDEO FR0G 
+
+

To allow a word again, use the following command ... +


++  unset/baddx VIDEO
+
+

13.67 set/badnode (6) +

+ +

set/badnode <node_call> Stop spots from this node_call +being propagated +

Setting a callsign as a 'badnode' will prevent spots from that node +going any further. They will not be displayed and they will not be +sent onto other nodes. +

The call can be a full or partial call (or a prefix), eg:- +


++  set/badnode K1TTT 
+
+

will stop anything from K1TTT (including any SSID's) +


++  unset/badnode K1TTT
+
+

will allow spots from him again. +

Use with extreme care. This command may well be superceded by FILTERing. +

13.68 set/badspotter (8) +

+ +

set/badspotter <call> Stop spots from this callsign being propagated +

Setting a callsign as a 'badspotter' will prevent spots from this callsign +going any further. They will not be displayed and they will not be +sent onto other nodes. +

The call must be written in full, no wild cards are allowed eg:- +


++  set/badspotter VE2STN 
+
+

will stop anything from VE2STN. If you want SSIDs as well then you must +enter them specifically. +


++  unset/badspotter VE2STN
+
+

will allow spots from him again. +

Use with extreme care. This command may well be superceded by FILTERing. +

13.69 set/beep (0) +

+ +

set/beep Add beeps to terminal messages +

Add a beep to DX and other terminal messages. +

13.70 set/clx (5) +

+ +

set/clx <node_call> [<node_call> ...] Make +the node_call a CLX type node +

Set the node_call as a CLX type node +

13.71 set/debug (9) +

+ +

set/debug <name> Add a debug level to the debug set +

You can remove this level with unset/debug <name> +

13.72 set/dx (0) +

+ +

set/dxAllow DX messages to arrive at your terminal +

You can stop DX messages with the unset/dx command +

13.73 set/dxgrid (0) +

+ +

set/dxgridAllow grid squares on the end of DX messages +

Some logging programs do not like the additional information at +the end of a DX spot. If this is the case, use the unset/dxgrid +command to remove the grid squares. +

13.74 set/dxnet (5) +

+ +

set/dxnet <node_call> [<node_call> ...] Make +the node_call a DXNet type node +

Set the node_call as a DXNet type node +

13.75 set/echo (0) +

+ +

set/echo Make the cluster echo your input +

If you are connected via a telnet session, different implimentations +of telnet handle echo differently depending on whether you are +connected via port 23 or some other port. You can use this command +to change the setting appropriately. +

You can remove the echo with the unset/echo command +

The setting is stored in your user profile. +

YOU DO NOT NEED TO USE THIS COMMAND IF YOU ARE CONNECTED VIA AX25. +

13.76 set/here (0) +

+ +

set/here Set the here flag +

Let others on the cluster know you are here by only displaying your +callsign. If you are away from your terminal you can use the unset/here +command to let people know you are away. This simply puts brackets +around your callsign to indicate you are not available. +

13.77 set/homenode (0) +

+ +

set/homenode <node_call> Set your home cluster +

Tell the cluster system where you normally connect to. Any Messages sent +to you will normally find their way there should you not be connected. +eg:- +


++  SET/HOMENODE gb7djk
+
+

13.78 set/hops (8) +

+ +

set/hops <node_call> ann|spots|wwv|wcy <n> +Set hop count +

Set the hop count for a particular type of broadcast for a node. +

This command allows you to set up special hop counts for a node +for currently: announce, spots, wwv and wcy broadcasts. +


++eg:
+  set/hops gb7djk ann 10
+  set/hops gb7mbc spots 20
+
+

Set SHOW/HOPS for information on what is already set. This command +creates a filter and works in conjunction with the filter system. +

13.79 set/isolate (9) +

+ +

set/isolate <node call> Isolate a node from the rest of the network +

Connect a node to your system in such a way that you are a full protocol +member of its network and can see all spots on it, but nothing either leaks +out from it nor goes back into from the rest of the nodes connected to you. +

You can potentially connect several nodes in this way. +

You can see which nodes are isolated with the show/isolate (1) command. +

You can remove the isolation with the command unset/isolate. +

13.80 set/language (0) +

+ +

set/language <language> Set the language you wish to use +

You can select the language that you want the cluster to use. Currently +the languages available are en (English) and nl (Dutch). +

13.81 set/location (0) +

+ +

set/location <lat and long> Set your latitude and longitude +

You can set your latitude and longitude manually or alternatively use the +set/qra command which will do the conversion for you. +


++  set/location 54 04 N 2 02 E
+
+

13.82 set/sys_location (9) +

+ +

set/sys_location <lat & long> Set your cluster latitude and longitude +

In order to get accurate headings and such like you must tell the system +what your latitude and longitude is. If you have not yet done a SET/QRA +then this command will set your QRA locator for you. For example:- +


++  SET/LOCATION 52 22 N 0 57 E
+
+

13.83 set/logininfo (0) +

+ +

set/logininfo Show logins and logouts of nodes and users +

Show users and nodes when they log in and out of the local cluster. You +can stop these messages by using the unset/logininfo command. +

13.84 set/lockout (9) +

+ +

set/lockout <call> Stop a callsign connecting to the cluster +

You can show who is locked out with the show/lockout command. +To allow the user to connect again, use the unset/lockout command. +

13.85 set/name (0) +

+ +

set/name <your_name> Set your name +

Tell the cluster what your name is, eg:- +


++  set/name Dirk
+
+

13.86 set/node (9) +

+ +

set/node <call> [<call> ...] Make the callsign an AK1A cluster +

Tell the system that the call(s) are to be treated as AK1A cluster and +fed PC Protocol rather normal user commands. +

From version 1.41 you can also set the following types of cluster +


++  set/spider
+  set/dxnet
+  set/clx
+  set/arcluster
+
+

To see what your nodes are set to, use the show/nodes command. +

13.87 set/obscount (9) +

+ +

set/obscount <count> <node call> Set the 'pump-up' obsolescence counter +

From version 1.35 onwards neighbouring nodes are pinged at regular intervals (see +SET/PINGINTERVAL), usually 300 seconds or 5 minutes. There is a 'pump-up' +counter which is decremented on every outgoing ping and then reset to +the 'obscount' value on every incoming ping. The default value of this +parameter is 2. +

What this means is that a neighbouring node will be pinged twice at +(default) 300 second intervals and if no reply has been heard just before +what would be the third attempt, that node is disconnected. +

If a ping is heard then the obscount is reset to the full value. Using +default values, if a node has not responded to a ping within 15 minutes, +it is disconnected. +

13.88 set/page (0) +

+ +

set/page <n> Set the number of lines per page +

Tell the system how many lines you wish on a page when the number of lines +of output from a command is more than this. The default is 20. Setting it +explicitly to 0 will disable paging. +


++  SET/PAGE 30
+  SET/PAGE 0
+
+

The setting is stored in your user profile. +

13.89 set/password (9) +

+ +

set/password <callsign> <string> Set a users password +

The password for a user can only be set by a full sysop. The string +can contain any characters but any spaces are removed (you can type in +spaces - but they won't appear in the password). You can see the +result with STAT/USER. The password is the usual 30 character baycom +type password. +

13.90 set/pinginterval (9) +

+ +

set/pinginterval <time> <node call> Set the ping time to neighbouring nodes +

As from version 1.35 all neighbouring nodes are pinged at regular intervals +in order to determine the rolling quality of the link and, in future, to +affect routing decisions. The default interval is 300 secs or 5 minutes. +

You can use this command to set a different interval. Please don't. +

But if you do the value you enter is treated as minutes up 60 and seconds +for numbers greater than that. +

This is used also to help determine when a link is down at the far end +(as certain cluster software doesn't always notice), see SET/OBSCOUNT +for more information. +

13.91 set/privilege (9) +

+ +

set/privilege <n> <call> [<call> ...] Set the privilege level on a call +

Set the privilege level on a callsign. The privilege levels that pertain +to commands are as default:- +


++  0 - normal user
+  1 - allow remote nodes normal user RCMDs
+  5 - various privileged commands (including shutdown, but not disc-
+      connect), the normal level for another node.
+  8 - more privileged commands (including disconnect)
+  9 - local sysop privilege. DO NOT SET ANY REMOTE USER OR NODE TO THIS
+      LEVEL.
+
+

If you are a sysop and you come in as a normal user on a remote connection +your privilege will automatically be set to 0. +

13.92 set/spider (5) +

+ +

set/spider <node_call> [<node_call> ...] Make +the node_call a DXSpider type node +

Set the node_call as a DXSpider type node +

13.93 set/sys_qra (9) +

+ +

set/sys_qra <locator> Set your cluster QRA locator +

13.94 set/qra (0) +

+ +

set/qra <locator> Set your QRA locator +

Tell the system what your QRA (or Maidenhead) locator is. If you have not +done a SET/LOCATION then your latitude and longitude will be set roughly +correctly (assuming your locator is correct ;-). For example:- +


++  SET/QRA JO02LQ
+
+

13.95 set/qth (0) +

+ +

set/qth <your QTH> Set your QTH +

Tell the system where your are. For example:- +


++  set/qth East Dereham, Norfolk
+
+

13.96 set/talk (0) +

+ +

set/talk Allow talk messages to be seen at your console +

Allow talk messages to arrive at your console. You can switch off +talks with the unset/talk command. +

13.97 set/wcy (0) +

+ +

set/wcy Allow WCY messages to be seen at your console +

Allow WCY information to be seen at your console. You can switch off +WCY messages with the unset/wcy command. +

13.98 set/wwv (0) +

+ +

set/wwv Allow WWV messages to be seen at your console +

Allow WWV information to be seen at your console. You can switch off +WWV messages with the unset/wwv command. +

13.99 set/wx (0) +

+ +

set/wx Allow WX messages to be seen at your console +

Allow WX information to be seen at your console. You can switch off +WX messages with the unset/wx command. +

13.100 show/baddx (1) +

+ +

show/baddxShow all the bad dx calls in the system +

Display all the bad dx callsigns in the system, see SET/BADDX +for more information. +

13.101 show/badnode (6) +

+ +

show/badnode Show all the bad nodes in the system +

Display all the bad node callsigns in the system, see SET/BADNODE +for more information. +

13.102 show/badspotter (1) +

+ +

show/badspotterShow all the bad spotters in the system +

Display all the bad spotter's callsigns in the system, see SET/BADSPOTTER +for more information. +

13.103 show/date (0) +

+ +

show/date [<prefix>|<callsign>] Show +the local time +

This is very nearly the same as SHOW/TIME, the only difference the format +of the date string if no arguments are given. +

If no prefixes or callsigns are given then this command returns the local +time and UTC as the computer has it right now. If you give some prefixes +then it will show UTC and UTC + the local offset (not including DST) at +the prefixes or callsigns that you specify. +

13.104 show/dx (0) +

+ +

show/dx [options] interrogate the spot database +

If you just type SHOW/DX you will get the last so many spots +(sysop configurable, but usually 10). +

In addition you can add any number of these options in very nearly +any order to the basic SHOW/DX command, they are:- +


++   
+on <band>       - eg 160m 20m 2m 23cm 6mm
+on <region>     - eg hf vhf uhf shf      (see SHOW/BANDS)
+   
+<number>        - the number of spots you want
+<from>-<to>     - <from> spot no <to> spot no in 
+                  the selected list
+   
+<prefix>        - for a spotted callsign beginning with <prefix>
+*<suffix>       - for a spotted callsign ending in <suffix>
+*<string>*      - for a spotted callsign containing <string>
+   
+day <number>    - starting <number> days ago
+day <from>-<to> - <from> days <to> days ago
+   
+info <text>     - any spots containing <text> in the info or remarks
+   
+by <call>       - any spots spotted by <call> (spotter <call> 
+                        is the same).
+
+qsl             - this automatically looks for any qsl info on the call
+                  held in the spot database.
+
+iota [<iota>]   - If the iota island number is missing it will 
+                  look for the string iota and anything which looks like 
+                  an iota island number. If you specify then it will look 
+                  for that island.
+
+qra [<locator>] - this will look for the specific locator if 
+                  you specify one or else anything that looks like a locator.
+
+

e.g. +


++   
+   SH/DX 9m0
+   SH/DX on 20m info iota
+   SH/DX 9a on vhf day 30
+   SH/DX rf1p qsl
+   SH/DX iota 
+   SH/DX iota eu-064
+   SH/DX qra jn86
+
+

13.105 show/dxcc (0) +

+ +

show/dxcc <prefix> Interrogate the spot database by country +

This command takes the <prefix> (which can be a full or partial +callsign if desired), looks up which internal country number it is +and then displays all the spots as per SH/DX for that country. +

The options for SHOW/DX also apply to this command. +e.g. +


++   
+   SH/DXCC G
+   SH/DXCC W on 20m info iota
+
+

13.106 show/files (0) +

+ +

show/files [<filearea> [<string>]] List +the contents of a filearea +

SHOW/FILES on its own will show you a list of the various fileareas +available on the system. To see the contents of a particular file +area type:- +


++   SH/FILES <filearea>
+
+

where <filearea> is the name of the filearea you want to see the +contents of. +

You can also use shell globbing characters like '*' and '?' in a +string to see a selection of files in a filearea eg:- +


++   SH/FILES bulletins arld*
+
+

See also TYPE - to see the contents of a file. +

13.107 show/filter (0) +

+ +

show/filter Show the filters you have set +

Show the contents of all the filters that are set by you. This command +displays all the filters set - for all the various categories. +

13.108 show/filter (extended for sysops) (5) +

+ +

show/filter <callsign> Show the filters set by <callsign> +

A sysop can look at any filters that have been set. +

13.109 show/hops (8) +

+ +

show/hops <node_call> [ann|spots|wcy|wwv|] Show the hop counts for a node +

This command shows the hop counts set up for a node. You can specify +which category you want to see. If you leave the category out then +all the categories will be listed. +

13.110 show/isolate (1) +

+ +

show/isolate Show a list of isolated nodes +

Show which nodes are currently set to be isolated. +

13.111 show/lockout (9) +

+ +

show/lockout Show a list of excluded callsigns +

Show a list of callsigns that have been excluded (locked out) of the +cluster locally with the set/lockout command +

13.112 show/log (8) +

+ +

show/log [<callsign>] Show excerpts from the system log +

This command outputs a short section of the system log. On its own +it will output a general logfile. With the optional callsign it will +show output from the log associated with that callsign. +

13.113 show/moon (0) +

+ +

show/moon [<prefix>|<callsign>] Show moon +rise and set times +

Show the Moon rise and set times for a (list of) prefixes or callsigns, +together with the azimuth and elevation of the sun currently at those +locations. +

If you don't specify any prefixes or callsigns, it will show the times for +your QTH (assuming you have set it with either SET/LOCATION or SET/QRA), +together with the current azimuth and elevation. +

In addition, it will show the gain or loss dB relative to the nominal +distance of 385,000Km due to the ellipsoidal nature of the orbit. +

If all else fails it will show the Moonrise and set times for the node +that you are connected to. +

For example:- +


++  SH/MOON
+  SH/MOON G1TLH W5UN
+
+

13.114 show/muf (0) +

+ +

show/muf <prefix> [<hours>][long] Show +the likely propagation to <prefix> +

This command allow you to estimate the likelihood of you contacting +a station with the prefix you have specified. The output assumes a modest +power of 20dBW and receiver sensitivity of -123dBm (about 0.15muV/10dB SINAD) +

The result predicts the most likely operating frequencies and signal +levels for high frequency (shortwave) radio propagation paths on +specified days of the year and hours of the day. It is most useful for +paths between 250 km and 6000 km, but can be used with reduced accuracy +for paths shorter or longer than this. +

The command uses a routine MINIMUF 3.5 developed by the U.S. Navy and +used to predict the MUF given the predicted flux, day of the year, +hour of the day and geographic coordinates of the transmitter and +receiver. This routine is reasonably accurate for the purposes here, +with a claimed RMS error of 3.8 MHz, but much smaller and less complex +than the programs used by major shortwave broadcasting organizations, +such as the Voice of America. +

The command will display some header information detailing its +assumptions, together with the locations, latitude and longitudes and +bearings. It will then show UTC (UT), local time at the other end +(LT), calculate the MUFs, Sun zenith angle at the midpoint of the path +(Zen) and the likely signal strengths. Then for each frequency for which +the system thinks there is a likelihood of a circuit it prints a value. +

The value is currently a likely S meter reading based on the conventional +6dB / S point scale. If the value has a '+' appended it means that it is +1/2 an S point stronger. If the value is preceeded by an 'm' it means that +there is likely to be much fading and by an 's' that the signal is likely +to be noisy. +

By default SHOW/MUF will show the next two hours worth of data. You +can specify anything up to 24 hours worth of data by appending the no of +hours required after the prefix. For example:- +


++  SH/MUF W
+
+

produces: +


++  RxSens: -123 dBM SFI: 159   R: 193   Month: 10   Day: 21
+  Power :   20 dBW    Distance:  6283 km    Delay: 22.4 ms
+  Location                       Lat / Long           Azim
+  East Dereham, Norfolk          52 41 N 0 57 E         47
+  United-States-W                43 0 N 87 54 W        299
+  UT LT  MUF Zen  1.8  3.5  7.0 10.1 14.0 18.1 21.0 24.9 28.0 50.0
+  18 23 11.5 -35  mS0+ mS2   S3
+  19  0 11.2 -41  mS0+ mS2   S3
+
+

indicating that you will have weak, fading circuits on top band and +80m but usable signals on 40m (about S3). +

inputing:- +


++  SH/MUF W 24
+
+

will get you the above display, but with the next 24 hours worth of +propagation data. +


++  SH/MUF W L 24
+  SH/MUF W 24 Long
+
+

Gives you an estimate of the long path propagation characterics. It +should be noted that the figures will probably not be very useful, nor +terrible accurate, but it is included for completeness. +

13.115 show/node (1) +

+ +

show/node [<node_call> ...] Show the type and version +number of nodes +

Show the type and version (if connected) of the nodes specified on the +command line. If no callsigns are specified then a sorted list of all +the non-user callsigns known to the system will be displayed. +

13.116 show/prefix (0) +

+ +

show/prefix <callsign> Interrogate the prefix database +

This command takes the <callsign> (which can be a full or partial +callsign or a prefix), looks up which internal country number +it is and then displays all the relevant prefixes for that country +together with the internal country no, the CQ and ITU regions. +

13.117 show/program (5) +

+ +

show/program Show the locations of all the included program modules +

Show the name and location where every program module was load from. This +is useful for checking where you think you have loaded a .pm file from. +

13.118 show/qra (0) +

+ +

show/qra <locator> [<locator>] Show the distance +between locators +show/qra <lat> <long> Convert latitude and longitude to a locator +

This is a multipurpose command that allows you either to calculate the +distance and bearing between two locators or (if only one locator is +given on the command line) the distance and beraing from your station +to the locator. For example:- +


++SH/QRA IO92QL 
+SH/QRA JN06 IN73
+
+

The first example will show the distance and bearing to the locator from +yourself, the second example will calculate the distance and bearing from +the first locator to the second. You can use 4 or 6 character locators. +

It is also possible to convert a latitude and longitude to a locator by +using this command with a latitude and longitude as an argument, for +example:- +


++SH/QRA 52 41 N 0 58 E
+
+

13.119 show/qrz (0) +

+ +

show/qrz <callsign> Show any callbook details on a callsign +

This command queries the QRZ callbook server on the internet +and returns any information available for that callsign. This service +is provided for users of this software by http://www.qrz.com +

13.120 show/route (0) +

+ +

show/route <callsign> Show the route to <callsign> +

This command allows you to see to which node the callsigns specified are +connected. It is a sort of inverse sh/config. +


++  sh/route n2tly
+
+

13.121 show/satellite (0) +

+ +

show/satellite <name> [<hours> <interval>] +Show satellite tracking data +

Show the tracking data from your location to the satellite of your choice +from now on for the next few hours. +

If you use this command without a satellite name it will display a list +of all the satellites known currently to the system. +

If you give a name then you can obtain tracking data of all the passes +that start and finish 5 degrees below the horizon. As default it will +give information for the next three hours for every five minute period. +

You can alter the number of hours and the step size, within certain +limits. +

Each pass in a period is separated with a row of '-----' characters +

So for example:- +


++SH/SAT AO-10 
+SH/SAT FENGYUN1 12 2
+
+

13.122 show/sun (0) +

+ +

show/sun [<prefix>|<callsign>] Show +sun rise and set times +

Show the sun rise and set times for a (list of) prefixes or callsigns, +together with the azimuth and elevation of the sun currently at those +locations. +

If all else fails it will show the sunrise and set times for the node +that you are connected to. +

For example:- +


++  SH/SUN
+  SH/SUN G1TLH K9CW ZS
+
+

13.123 show/time (0) +

+ +

show/time [<prefix>|<callsign>] Show +the local time +

13.124 show/wcy (0) +

+ +

show/wcy Show the last 10 WCY broadcasts +show/wcy <n> Show the last <n> WCY broadcasts +

Display the most recent WCY information that has been received by the system +

13.125 show/wwv (0) +

+ +

show/wwv Show the last 10 WWV broadcasts +show/wwv <n> Show the last <n> WWV broadcasts +

Display the most recent WWV information that has been received by the system +

13.126 shutdown (5) +

+ +

shutdown Shutdown the cluster +

Shutdown the cluster and disconnect all the users. If you have Spider +set to respawn in /etc/inittab it will of course restart. +

13.127 spoof (9) +

+ +

spoof <callsign> <command> Run commands as another user +

This is a very simple yet powerful command for the sysop. It allows you to +issue commands as if you were a different user. This is very useful for the +kind of things that users seem to always get wrong.. like home_node for +example. +

13.128 stat/db (5) +

+ +

stat/db <dbname> Show the status of a database +

Show the internal status of a database descriptor. +

Depending on your privilege level you will see more or less information. +This command is unlikely to be of much use to anyone other than a sysop. +

13.129 stat/channel (5) +

+ +

stat/channel <callsign> Show the status of a channel on the cluster +

Show the internal status of the channel object either for the channel that +you are on or else for the callsign that you asked for. +

Only the fields that are defined (in perl term) will be displayed. +

13.130 stat/msg (5) +

+ +

stat/msg <msgno> Show the status of a message +

This command shows the internal status of a message and includes information +such as to whom it has been forwarded, its size, origin etc etc. +

13.131 stat/user (5) +

+ +

stat/user <callsign> Show the full status of a user +

Shows the full contents of a user record including all the secret flags +and stuff. +

Only the fields that are defined (in perl term) will be displayed. +

13.132 sysop (0) +

+ +

sysop Regain your privileges if you login remotely +

The system automatically reduces your privilege level to that of a +normal user if you login in remotely. This command allows you to +regain your normal privilege level. It uses the normal system: five +numbers are returned that are indexes into the character array that is +your assigned password (see SET/PASSWORD). The indexes start from +zero. +

You are expected to return a string which contains the characters +required in the correct order. You may intersperse those characters +with others to obscure your reply for any watchers. For example (and +these values are for explanation :-): +


++  password = 012345678901234567890123456789
+  > sysop
+  22 10 15 17 3
+
+

you type:- +


++ aa2bbbb0ccc5ddd7xxx3n
+ or 2 0 5 7 3
+ or 20573
+
+

They will all match. If there is no password you will still be offered +numbers but nothing will happen when you input a string. Any match is +case sensitive. +

13.133 talk (0) +

+ +

talk <callsign> Enter talk mode with <callsign> +talk <callsign> <text> Send a text message to <callsign> +talk <callsign> > <node_call> [<text>] +Send a text message to <callsign> via <node_call> +

Send a short message to any other station that is visible on the cluster +system. You can send it to anyone you can see with a SHOW/CONFIGURATION +command, they don't have to be connected locally. +

The second form of TALK is used when other cluster nodes are connected +with restricted information. This usually means that they don't send +the user information usually associated with logging on and off the cluster. +

If you know that G3JNB is likely to be present on GB7TLH, but you can only +see GB7TLH in the SH/C list but with no users, then you would use the +second form of the talk message. +

If you want to have a ragchew with someone you can leave the text message +out and the system will go into 'Talk' mode. What this means is that a +short message is sent to the recipient telling them that you are in a 'Talking' +frame of mind and then you just type - everything you send will go to the +station that you asked for. +

All the usual announcements, spots and so on will still come out on your +terminal. +

If you want to do something (such as send a spot) you precede the normal +command with a '/' character, eg:- +


++   /DX 14001 G1TLH What's a B class licensee doing on 20m CW?
+   /HELP talk
+
+

To leave talk mode type: +


++   /EX
+
+

13.134 type (0) +

+ +

type <filearea>/<name> Look at a file in one of the fileareas +

Type out the contents of a file in a filearea. So, for example, in +filearea 'bulletins' you want to look at file 'arld051' you would +enter:- +


++   TYPE bulletins/arld051
+
+

See also SHOW/FILES to see what fileareas are available and a +list of content. +

13.135 who (0) +

+ +

who Show who is physically connected locally +

This is a quick listing that shows which callsigns are connected and +what sort of connection they have +

13.136 wx (0) +

+ +

wx <text> Send a weather message to local users +wx full <text> Send a weather message to all cluster users +

Weather messages can sometimes be useful if you are experiencing an extreme +that may indicate enhanced conditions +

13.137 wx (enhanced for sysops) (5) +

+ +

wx sysop <text> Send a weather message to other clusters only +

Send a weather message only to other cluster nodes and not to general users. +

+Next +Previous +Contents + +