From 99da9d68a4fee5b30fa90b679a9e015add2b75c9 Mon Sep 17 00:00:00 2001 From: minima Date: Wed, 2 Jan 2002 15:59:16 +0000 Subject: [PATCH] update copyright extend and modernise windows instructions --- Changes | 3 + cmd/show/version.pl | 2 +- html/installation-4.html | 29 ++++-- html/installation-5.html | 143 +++++++++++++++++++---------- html/installation.html | 6 +- perl/cluster.pl | 2 +- sgml/installation.sgml | 167 ++++++++++++++++++++++------------ txt/installation.txt | 190 ++++++++++++++++++++++++++------------- 8 files changed, 363 insertions(+), 179 deletions(-) diff --git a/Changes b/Changes index 6368ff21..c42f7676 100644 --- a/Changes +++ b/Changes @@ -1,3 +1,6 @@ +02Jan02======================================================================= +1. updated the copyright dates +2. modernised and extended the Windows instructions a bit. 31Dec01======================================================================= 1. Make a couple of changes to the Installation Manual and add a FAQ on msg deletion. (g0vgs) diff --git a/cmd/show/version.pl b/cmd/show/version.pl index fe0ae4d9..36d4464b 100644 --- a/cmd/show/version.pl +++ b/cmd/show/version.pl @@ -9,6 +9,6 @@ my @out; push @out, "DX Spider Cluster version $main::version (build $main::build) on \u$^O"; -push @out, "Copyright (c) 1998-2001 Dirk Koopman G1TLH"; +push @out, "Copyright (c) 1998-2002 Dirk Koopman G1TLH"; return (1, @out); diff --git a/html/installation-4.html b/html/installation-4.html index d17f1305..84464dd4 100644 --- a/html/installation-4.html +++ b/html/installation-4.html @@ -171,18 +171,31 @@ do it that way because it suits me.

Get the current version of the DX Spider distribution. This needs to be v1.47 or later. You've got two ways (currently) of getting this; either get a CVS update from sourceforge (if you don't know -what this is, then it isn't for you) or get my package from:- +what this is, then it isn't for you) or get the latest "official" +release from:-

-http://www.dcc.rsgb.org/WinSpider.zip

or if you want the lastest CVS version (which is produced every night) +http://www.dxcluster.org/download/index.html

or if you want the lastest snapshot of CVS version (which is produced +every night):-

-http://www.dxcluster.org/download/CVSlatest.tgz

If you went down the CVS route, then everything will be nicely -set out on your local disk. If you got the ZIP file, unpack it to +http://www.dxcluster.org/download/CVSlatest.tgz

This is generally the best one to go for as it is completely up to +date. However, there is always the very slight chance that it might +unstable. Generally, there will be a note on the website if this is +the case. +

+

The only difference between "CVSlatest.tgz" and the latest +"official" release version is that it is more up to date. Don't confuse +this TGZ file with "Downloading from Sourceforge with CVS" - they are two +quite different things. +

+

If you went down the CVS route (ie installed wincvs and downloaded from +sourceforge), then everything will be nicely +set out on your local disk. If you got the TGZ file, unpack it to somewhere convenient. The following examples assume that you put it on drive "C:\", for convenience. -

NOTE: This distribution method will go away as soon as the first -v1.47 tarball is released. You can use WinZip to unpack that, and -my life will be made easier by not needing to keep this .ZIP file -updated. +

+

You will need +winzip to +manipulate the TGZ files (they are bit like ZIP files) if you are not using CVS.

Next diff --git a/html/installation-5.html b/html/installation-5.html index f9354ad1..0fd38b4b 100644 --- a/html/installation-5.html +++ b/html/installation-5.html @@ -15,10 +15,10 @@

5. Installing the software

-

Ensure that your CVS session or your unZIPped file have left you -with a directory "C:\spider\local"; if not, go to "C:\spider\" -and create one. If "C:\spider" is missing, go back and figure out -why, because it shouldn't be. +

Ensure that your CVS session or your WINunZIPped file have left you with +a directory "C:\spider\local" and C:\spider\local_cmd"; if not, go to +"C:\spider\" and create them. If "C:\spider" is missing, go back and +figure out why, because it shouldn't be.

Now create your own local copy of the DXVars.pm file by:-

@@ -49,13 +49,60 @@ minimum you must adjust the following items in DXVars.pm:-
  • $mycall - Should hold the callsign of your DX Cluster
  • $myname - The SysOp's first name
  • $myalias - the SysOp's callsign. Cannot be the same as $mycall!
    • +
  • $myqth - The station's geographical location (QTH).
    • +
  • $mylatitude - The station latitude in degrees and decimal fractions
    • +
  • $mylongitude - The station longitude in degrees and decimal fractions
    • +
  • $mylocator - The Maidenhead (or QRA) locator of the station
    • -

    You really also ought to update the $mylatitude, $mylongitude, -$myqth and $myemail variables. And unless you are absolutely -certain you know what you're doing, you should change nothing -else in this file. +

    You really also ought to update the $myqth and $myemail variables. And +unless you are absolutely certain you know what you're doing, you +should change nothing else in this file. Note that if you use an "@" or +a "$" character in one of the above strings (typically in $myemail) you must +write them as "\@" or "\$".

    -

    5.1 The AGW packet engine +

    +

    5.1 Incoming telnets +

    + +

    If you want to enable inbound "TELNET" connections (or you are running +Windows NT, 2000 or XP), you've got a little more work to do. From a +handy "DOS box" that's not doing anything else, do the following:- +

    +

    +
    +copy \spider\perl\Listeners.pm \spider\local
+cd \spider\local
+notepad listeners.pm
+
    +
    +

    The following lines need attention:- +

    +

    +
    +["0.0.0.0", 7300],
+
    +
    +

    On my machine, I've simply uncommented the "0.0.0.0" entry by +removing the '#' from the front of the line. +

    You MUST carry out this step if you are +running on a Windows NT, 2000 or XP based system +

    If you don't have a static hostname for your machine, and you +intend to allow folk to connect to your machine across the +internet, then I'd suggest you pay a visit to www.dyndns.org and +create one for yourself. While it's free, it will take a modest +an amount of effort on your part to read, understand and +implement what needs to be done to set this up. +

    +

    If your machine is connected to the internet and you don't +want to allow your machine to be visible to the outside world you +should change the "0.0.0.0" to "127.0.0.1" [which is +"localhost"]. This will then only allow connections from inside your +machine. As was said earlier: if you aren't running Win9x (or you want +to use DXTelnet or somesuch), then you need to have the machine +listening at least to "127.0.0.1" ("0.0.0.0" means all IP +addresses). +

    +

    5.2 The AGW packet engine

    On the assumption that you'll be using the SV2AGW Packet Engine @@ -84,7 +131,7 @@ consider adjusting the following items in AGWConnect.pm:-

  • $passwd - password that matches $login

    • -

    5.2 Setting up the initial user files +

    5.3 Setting up the initial user files

    Next you need to create the initial user files, etc. A tool is @@ -138,8 +185,9 @@ queue msg (0)

    Now, if that's what you've got, you are very nearly home and dry (in as far as these particular experiments are concerned, anyhow) -

    To access your new cluster (from the local machine) find yourself another -"DOS box" and do the following:- +

    If you are running Windows 9x you can access your new cluster (from +the local machine) by finding yourself another "DOS box" and doing the +following:- 

    @@ -147,7 +195,25 @@ cd \spider\perl
 perl winclient.pl
    -

    If you are rewarded with a display which looks something like:- +

    If you are running Windows NT, 2000 or XP then winclient.pl does not +work. We don't know why other than this seems to be some kind of +incomaptibility in perl. You can achieve the same thing by telnetting +to the port you defined in Listeners.pm (7300 as default), thus:- +

    +

    +
    +Menu->Start->Run
+telnet localhost 7300
+
    +
    +

    On getting the login: prompt, enter your sysop callsign (the one you +put in DXVars.pm as $myalias). +

    +

    I would recommend strongly that you obtain a better telnet +client than that which comes with windows (I use +PuTTY). +

    +

    Anyway, if you are rewarded with a display which looks something like:- 

    @@ -161,46 +227,25 @@ case you were wondering, "Iain", "M0ADI" and "GB7SJP" all came
 from the version of DXVars.pm that was on the machine when I
 started the winclient.pl)
 
    
-
    5.3 Incoming telnets
-
    
-
-
    If you want to enable inbound "TELNET" connections, you've got a
-little more work to do. From a handy "DOS box" that's not doing
-anything else, do the following:-
-
    
-
    
-
    -copy \spider\perl\listeners.pm \spider\local
-cd \spider\local
-notepad listeners.pm
-
    
-
    
-
    The following lines need attention:-
-
    
-
    
-
    -["0.0.0.0", 7300],
-
    
-
    
-
    On my machine, I've simply uncommented the "0.0.0.0" entry by
-removing the '#' from the front of the line. 
-
    If you don't have a static hostname for your machine, and you
-intend to allow folk to connect to your machine across the
-internet, then I'd suggest you pay a visit to www.dyndns.org and
-create one for yourself. While it's free, it will take a modest
-an amount of effort on your part to read, understand and
-implement what needs to be done to set this up.
+
    The interface is very basic. It is a simple command line. There are
+better looking interfaces. Most of the "standard" logging and DX
+Cluster access programs that are capable of connecting via a TCP or
+telnet connection will work as a "Sysop Console" client. You connect
+to "localhost" on the port that you defined in Listeners.pm (usually
+7300). I recommend packages like 
+DXTelnet.
 
    
 
    5.4 Connecting to other clusters
 
    
 
-
    If you want to connect this to another cluster, then you'll want
-to negotiate a link with someone. For experimental purposes, I'm
-happy to allow folk to connect to GB7DXA (spud.ath.cx), on the
-understanding that the system may or may not be there and may or
-may not be connected to anything particularly useful at any given
-moment. Contact me by Email if you want me to set up a connection
-for you.
+
    If you want to connect this to another cluster, then you'll want to
+negotiate a link with someone. For experimental purposes, I'm happy to
+allow folk to connect to GB7DXA (spud.ath.cx), on the understanding
+that the system may or may not be there and may or may not be
+connected to anything particularly useful at any given moment. Contact
+me by 
+Email if you
+want me to set up a connection for you.
 
    
 
    
 Next
diff --git a/html/installation.html b/html/installation.html
index 13f6fe77..94747789 100644
--- a/html/installation.html
+++ b/html/installation.html
@@ -63,9 +63,9 @@ Ian Maude, G0VGS, (ianmaude@btinternet.com)December 2001 revision 1.1
 
    5. Installing the software
    
 
 
 
    
diff --git a/perl/cluster.pl b/perl/cluster.pl
index b7ac1177..203f6956 100755
--- a/perl/cluster.pl
+++ b/perl/cluster.pl
@@ -362,7 +362,7 @@ $build = "$build.$branch" if $branch;
 Log('cluster', "DXSpider V$version, build $build started");
 
 # banner
-dbg("Copyright (c) 1998-2001 Dirk Koopman G1TLH");
+dbg("Copyright (c) 1998-2002 Dirk Koopman G1TLH");
 dbg("DXSpider Version $version, build $build started");
 
 # load Prefixes
diff --git a/sgml/installation.sgml b/sgml/installation.sgml
index 4fbf7fbd..d6d17f52 100644
--- a/sgml/installation.sgml
+++ b/sgml/installation.sgml
@@ -1055,31 +1055,43 @@ do it that way because it suits me.
 Get the current version of the DX Spider distribution. This needs
 to be v1.47 or later. You've got two ways (currently) of getting
 this; either get a CVS update from sourceforge (if you don't know
-what this is, then it isn't for you) or get my package from:-
+what this is, then it isn't for you) or get the latest "official"
+release from:-
 
-
+
 
-or if you want the lastest CVS version (which is produced every night)
+or if you want the lastest snapshot of CVS version (which is produced 
+every night):-
 
 
 
-If you went down the CVS route, then everything will be nicely
-set out on your local disk. If you got the ZIP file, unpack it to
+This is generally the best one to go for as it is completely up to
+date. However, there is always the very slight chance that it might
+unstable. Generally, there will be a note on the website if this is 
+the case. 
+
+
    The only difference between "CVSlatest.tgz" and the latest
+"official" release version is that it is more up to date. Don't confuse 
+this TGZ file with "Downloading from Sourceforge with CVS" - they are two
+quite different things.  
+
+
    
+If you went down the CVS route (ie installed wincvs and downloaded from
+sourceforge), then everything will be nicely
+set out on your local disk. If you got the TGZ file, unpack it to
 somewhere convenient. The following examples assume that you put
 it on drive "C:\", for convenience.
 
-NOTE: This distribution method will go away as soon as the first
-v1.47 tarball is released. You can use WinZip to unpack that, and
-my life will be made easier by not needing to keep this .ZIP file
-updated.
+
    You will need  to
+manipulate the TGZ files (they are bit like ZIP files) if you are not using CVS.
 
 Installing the software
 
 
    
-Ensure that your CVS session or your unZIPped file have left you
-with a directory "C:\spider\local"; if not, go to "C:\spider\"
-and create one. If "C:\spider" is missing, go back and figure out
-why, because it shouldn't be.
+Ensure that your CVS session or your WINunZIPped file have left you with
+a directory "C:\spider\local" and C:\spider\local_cmd"; if not, go to
+"C:\spider\" and create them. If "C:\spider" is missing, go back and
+figure out why, because it shouldn't be.
 
 Now create your own local copy of the DXVars.pm file by:-
 
@@ -1108,12 +1120,59 @@ minimum you must adjust the following items in DXVars.pm:-
  $mycall  - Should hold the callsign of your DX Cluster
  $myname  - The SysOp's first name
  $myalias - the SysOp's callsign. Cannot be the same as $mycall!
+ $myqth - The station's geographical location (QTH).
+ $mylatitude - The station latitude in degrees and decimal fractions
+ $mylongitude - The station longitude in degrees and decimal fractions
+ $mylocator - The Maidenhead (or QRA) locator of the station 
 
 
-You really also ought to update the $mylatitude, $mylongitude,
-$myqth and $myemail variables. And unless you are absolutely
-certain you know what you're doing, you should change nothing
-else in this file.
+You really also ought to update the $myqth and $myemail variables. And
+unless you are absolutely certain you know what you're doing, you
+should change nothing else in this file. Note that if you use an "@" or 
+a "$" character in one of the above strings (typically in $myemail) you must 
+write them as "\@" or "\$". 
+
+
+Incoming telnets
+
+
    
+If you want to enable inbound "TELNET" connections (or you are running
+Windows NT, 2000 or XP), you've got a little more work to do. From a
+handy "DOS box" that's not doing anything else, do the following:-
+
+
+copy \spider\perl\Listeners.pm \spider\local
+cd \spider\local
+notepad listeners.pm
+
+
+The following lines need attention:-
+
+
+["0.0.0.0", 7300],
+
+
+On my machine, I've simply uncommented the "0.0.0.0" entry by
+removing the '#' from the front of the line. 
+
+You MUST carry out this step if you are
+running on a Windows NT, 2000 or XP based system
+
+If you don't have a static hostname for your machine, and you
+intend to allow folk to connect to your machine across the
+internet, then I'd suggest you pay a visit to www.dyndns.org and
+create one for yourself. While it's free, it will take a modest
+an amount of effort on your part to read, understand and
+implement what needs to be done to set this up.
+
+
    If your machine is connected to the internet and you don't
+want to allow your machine to be visible to the outside world you
+should change the "0.0.0.0" to "127.0.0.1" [which is
+"localhost"]. This will then only allow connections from inside your
+machine. As was said earlier: if you aren't running Win9x (or you want
+to use DXTelnet or somesuch), then you need to have the machine
+listening at least to "127.0.0.1" ("0.0.0.0" means all IP
+addresses).
 
 The AGW packet engine
 
@@ -1195,15 +1254,34 @@ queue msg (0)
 Now, if that's what you've got, you are very nearly home and dry
 (in as far as these particular experiments are concerned, anyhow)
 
-To access your new cluster (from the local machine) find yourself another
-"DOS box" and do the following:-
+If you are running Windows 9x you can access your new cluster (from
+the local machine) by finding yourself another "DOS box" and doing the
+following:-
 
 
 cd \spider\perl
 perl winclient.pl
 
 
-If you are rewarded with a display which looks something like:-
+If you are running Windows NT, 2000 or XP then winclient.pl does not
+work. We don't know why other than this seems to be some kind of
+incomaptibility in perl. You can achieve the same thing by telnetting
+to the port you defined in Listeners.pm (7300 as default), thus:-
+
+
+Menu->Start->Run
+telnet localhost 7300
+
+
+On getting the login: prompt, enter your sysop callsign (the one you
+put in DXVars.pm as $myalias).
+
+
    I would recommend strongly that you obtain a better telnet
+client than that which comes with windows (I use ). 
+
+
    Anyway, if you are rewarded with a display which looks something like:-
 
 
 Hello Iain, this is GB7SJP in Amersham, Bucks running DXSpider V1.47
@@ -1216,45 +1294,24 @@ case you were wondering, "Iain", "M0ADI" and "GB7SJP" all came
 from the version of DXVars.pm that was on the machine when I
 started the winclient.pl)
 
-Incoming telnets
-
-
    
-If you want to enable inbound "TELNET" connections, you've got a
-little more work to do. From a handy "DOS box" that's not doing
-anything else, do the following:-
-
-
-copy \spider\perl\listeners.pm \spider\local
-cd \spider\local
-notepad listeners.pm
-
-
-The following lines need attention:-
-
-
-["0.0.0.0", 7300],
-
-
-On my machine, I've simply uncommented the "0.0.0.0" entry by
-removing the '#' from the front of the line. 
-
-If you don't have a static hostname for your machine, and you
-intend to allow folk to connect to your machine across the
-internet, then I'd suggest you pay a visit to www.dyndns.org and
-create one for yourself. While it's free, it will take a modest
-an amount of effort on your part to read, understand and
-implement what needs to be done to set this up.
+
    The interface is very basic. It is a simple command line. There are
+better looking interfaces. Most of the "standard" logging and DX
+Cluster access programs that are capable of connecting via a TCP or
+telnet connection will work as a "Sysop Console" client. You connect
+to "localhost" on the port that you defined in Listeners.pm (usually
+7300). I recommend packages like .
 
 Connecting to other clusters
 
 
    
-If you want to connect this to another cluster, then you'll want
-to negotiate a link with someone. For experimental purposes, I'm
-happy to allow folk to connect to GB7DXA (spud.ath.cx), on the
-understanding that the system may or may not be there and may or
-may not be connected to anything particularly useful at any given
-moment. Contact me by Email if you want me to set up a connection
-for you.
+If you want to connect this to another cluster, then you'll want to
+negotiate a link with someone. For experimental purposes, I'm happy to
+allow folk to connect to GB7DXA (spud.ath.cx), on the understanding
+that the system may or may not be there and may or may not be
+connected to anything particularly useful at any given moment. Contact
+me by  if you
+want me to set up a connection for you.
 
 General Information
 
diff --git a/txt/installation.txt b/txt/installation.txt
index a555718b..ef441bbe 100644
--- a/txt/installation.txt
+++ b/txt/installation.txt
@@ -43,9 +43,9 @@
 
   5. Installing the software
 
-     5.1 The AGW packet engine
-     5.2 Setting up the initial user files
-     5.3 Incoming telnets
+     5.1 Incoming telnets
+     5.2 The AGW packet engine
+     5.3 Setting up the initial user files
      5.4 Connecting to other clusters
 
   6. General Information
@@ -1278,30 +1278,45 @@
   Get the current version of the DX Spider distribution. This needs to
   be v1.47 or later. You've got two ways (currently) of getting this;
   either get a CVS update from sourceforge (if you don't know what this
-  is, then it isn't for you) or get my package from:-
+  is, then it isn't for you) or get the latest "official" release from:-
 
-  http://www.dcc.rsgb.org/WinSpider.zip
+  http://www.dxcluster.org/download/index.html
 
-  or if you want the lastest CVS version (which is produced every night)
+  or if you want the lastest snapshot of CVS version (which is produced
+  every night):-
 
   http://www.dxcluster.org/download/CVSlatest.tgz
 
-  If you went down the CVS route, then everything will be nicely set out
-  on your local disk. If you got the ZIP file, unpack it to somewhere
+  This is generally the best one to go for as it is completely up to
+  date. However, there is always the very slight chance that it might
+  unstable. Generally, there will be a note on the website if this is
+  the case.
+
+
+  The only difference between "CVSlatest.tgz" and the latest "official"
+  release version is that it is more up to date. Don't confuse this TGZ
+  file with "Downloading from Sourceforge with CVS" - they are two quite
+  different things.
+
+
+  If you went down the CVS route (ie installed wincvs and downloaded
+  from sourceforge), then everything will be nicely set out on your
+  local disk. If you got the TGZ file, unpack it to somewhere
   convenient. The following examples assume that you put it on drive
   "C:\", for convenience.
 
-  NOTE: This distribution method will go away as soon as the first v1.47
-  tarball is released. You can use WinZip to unpack that, and my life
-  will be made easier by not needing to keep this .ZIP file updated.
+
+  You will need winzip to manipulate the TGZ files (they are bit like
+  ZIP files) if you are not using CVS.
 
 
   5.  Installing the software
 
-  Ensure that your CVS session or your unZIPped file have left you with
-  a directory "C:\spider\local"; if not, go to "C:\spider\" and create
-  one. If "C:\spider" is missing, go back and figure out why, because it
-  shouldn't be.
+  Ensure that your CVS session or your WINunZIPped file have left you
+  with a directory "C:\spider\local" and C:\spider\local_cmd"; if not,
+  go to "C:\spider\" and create them. If "C:\spider" is missing, go back
+  and figure out why, because it shouldn't be.
+
 
   Now create your own local copy of the DXVars.pm file by:-
 
@@ -1318,7 +1333,7 @@
 
 
 
-  cd \spider\local
+       cd \spider\local
 
 
 
@@ -1342,12 +1357,73 @@
 
   o  $myalias - the SysOp's callsign. Cannot be the same as $mycall!
 
-  You really also ought to update the $mylatitude, $mylongitude, $myqth
-  and $myemail variables. And unless you are absolutely certain you know
-  what you're doing, you should change nothing else in this file.
+  o  $myqth - The station's geographical location (QTH).
+
+  o  $mylatitude - The station latitude in degrees and decimal fractions
+
+  o  $mylongitude - The station longitude in degrees and decimal
+     fractions
+
+  o  $mylocator - The Maidenhead (or QRA) locator of the station
+
+  You really also ought to update the $myqth and $myemail variables. And
+  unless you are absolutely certain you know what you're doing, you
+  should change nothing else in this file. Note that if you use an "@"
+  or a "$" character in one of the above strings (typically in $myemail)
+  you must write them as "\@" or "\$".
+
+
+
+  5.1.  Incoming telnets
+
+  If you want to enable inbound "TELNET" connections (or you are running
+  Windows NT, 2000 or XP), you've got a little more work to do. From a
+  handy "DOS box" that's not doing anything else, do the following:-
+
+
+
+
+
+  copy \spider\perl\Listeners.pm \spider\local
+  cd \spider\local
+  notepad listeners.pm
+
+
+
+
+  The following lines need attention:-
+
+
+
+       ["0.0.0.0", 7300],
+
+
 
 
-  5.1.  The AGW packet engine
+  On my machine, I've simply uncommented the "0.0.0.0" entry by removing
+  the '#' from the front of the line.
+
+  You MUST carry out this step if you are running on a Windows NT, 2000
+  or XP based system
+
+  If you don't have a static hostname for your machine, and you intend
+  to allow folk to connect to your machine across the internet, then I'd
+  suggest you pay a visit to www.dyndns.org and create one for yourself.
+  While it's free, it will take a modest an amount of effort on your
+  part to read, understand and implement what needs to be done to set
+  this up.
+
+
+  If your machine is connected to the internet and you don't want to
+  allow your machine to be visible to the outside world you should
+  change the "0.0.0.0" to "127.0.0.1" [which is "localhost"]. This will
+  then only allow connections from inside your machine. As was said
+  earlier: if you aren't running Win9x (or you want to use DXTelnet or
+  somesuch), then you need to have the machine listening at least to
+  "127.0.0.1" ("0.0.0.0" means all IP addresses).
+
+
+  5.2.  The AGW packet engine
 
   On the assumption that you'll be using the SV2AGW Packet Engine to
   interface your radios to the cluster, you should now create your own
@@ -1382,9 +1458,7 @@
   o  $passwd - password that matches $login
 
 
-
-
-  5.2.  Setting up the initial user files
+  5.3.  Setting up the initial user files
 
   Next you need to create the initial user files, etc. A tool is
   supplied which will do this for you. To run the tool:-
@@ -1441,70 +1515,66 @@
 
 
 
+
   Now, if that's what you've got, you are very nearly home and dry (in
   as far as these particular experiments are concerned, anyhow)
 
-  To access your new cluster (from the local machine) find yourself
-  another "DOS box" and do the following:-
-
-
-
-
-  cd \spider\perl
-  perl winclient.pl
-
+  If you are running Windows 9x you can access your new cluster (from
+  the local machine) by finding yourself another "DOS box" and doing the
+  following:-
 
 
 
-  If you are rewarded with a display which looks something like:-
+       cd \spider\perl
+       perl winclient.pl
 
 
 
-       Hello Iain, this is GB7SJP in Amersham, Bucks running DXSpider V1.47
-       Cluster: 1 nodes, 1 local / 1 total users Max users 2 Uptime 0 00:00
-       M0ADI de GB7SJP 4-Mar-2001 1511Z >
 
+  If you are running Windows NT, 2000 or XP then winclient.pl does not
+  work. We don't know why other than this seems to be some kind of
+  incomaptibility in perl. You can achieve the same thing by telnetting
+  to the port you defined in Listeners.pm (7300 as default), thus:-
 
 
 
-  You've arrived. Try some commands, and see how they feel. (In case you
-  were wondering, "Iain", "M0ADI" and "GB7SJP" all came from the version
-  of DXVars.pm that was on the machine when I started the winclient.pl)
+       Menu->Start->Run
+       telnet localhost 7300
 
 
-  5.3.  Incoming telnets
 
-  If you want to enable inbound "TELNET" connections, you've got a
-  little more work to do. From a handy "DOS box" that's not doing
-  anything else, do the following:-
 
+  On getting the login: prompt, enter your sysop callsign (the one you
+  put in DXVars.pm as $myalias).
 
 
-       copy \spider\perl\listeners.pm \spider\local
-       cd \spider\local
-       notepad listeners.pm
+  I would recommend strongly that you obtain a better telnet client than
+  that which comes with windows (I use PuTTY).
 
 
+  Anyway, if you are rewarded with a display which looks something
+  like:-
 
 
-  The following lines need attention:-
-
 
+       Hello Iain, this is GB7SJP in Amersham, Bucks running DXSpider V1.47
+       Cluster: 1 nodes, 1 local / 1 total users Max users 2 Uptime 0 00:00
+       M0ADI de GB7SJP 4-Mar-2001 1511Z >
 
-       ["0.0.0.0", 7300],
 
 
 
+  You've arrived. Try some commands, and see how they feel. (In case you
+  were wondering, "Iain", "M0ADI" and "GB7SJP" all came from the version
+  of DXVars.pm that was on the machine when I started the winclient.pl)
 
-  On my machine, I've simply uncommented the "0.0.0.0" entry by removing
-  the '#' from the front of the line.
 
-  If you don't have a static hostname for your machine, and you intend
-  to allow folk to connect to your machine across the internet, then I'd
-  suggest you pay a visit to www.dyndns.org and create one for yourself.
-  While it's free, it will take a modest an amount of effort on your
-  part to read, understand and implement what needs to be done to set
-  this up.
+  The interface is very basic. It is a simple command line. There are
+  better looking interfaces. Most of the "standard" logging and DX
+  Cluster access programs that are capable of connecting via a TCP or
+  telnet connection will work as a "Sysop Console" client. You connect
+  to "localhost" on the port that you defined in Listeners.pm (usually
+  7300). I recommend packages like DXTelnet.
 
 
   5.4.  Connecting to other clusters
@@ -1516,6 +1586,7 @@
   connected to anything particularly useful at any given moment. Contact
   me by Email if you want me to set up a connection for you.
 
+
   6.  General Information
 
   The following relates to all versions of DXSpider and is not platform
@@ -1571,11 +1642,6 @@
 
 
 
-
-
-
-
-
 
 
 
-- 
2.43.0