The DXSpider CVS Changes erratum

If you have any problems with a new CVS version please mail the support +list or come and report on WW Convers channel 9000 or from a 44 host to +sys2.pa4ab.ampr.org (44.137.44.16) port 6667 (IRC) and join #9000. +

The latest CVS is version 1.47. There are major changes going on currently +as the code is altered to allow DXSpider to be run under Microsoft Windows. +

There is a separate file for the Windows installation in the /spider/html +and /spider/txt directories so I will not include that here. +

For Linux users, there are several steps to complete to update from +version 1.46. +

Alter the hostnames and ports to reflect you setup. This file is only +used for incoming telnet requests. You do not have to use hostnames, it +is quite ok to use IP addresses and it is also a matter of choice whether +or not you add the domain. +

Now all this is well and good if you have a static IP address. If your IP +address is dynamic then one line will do, like this ... +

From this version, the file client.pl has ceased to be needed. In fact it +has been removed. If you are still using client.pl in your ax25d.conf then +replace it with /spider/src/client. +

+ + + +The DXSpider CVS Changes erratum +<author>Ian Maude, G0VGS, (ianmaude@btinternet.com) +<date>Version 0.1 March 2001 +<abstract> +A reference for CVS users of the DXSpider DXCluster program. +</abstract> + + + +<P> +If you have any problems with a new CVS version please mail the support +list or come and report on WW Convers channel 9000 or from a 44 host to +sys2.pa4ab.ampr.org (44.137.44.16) port 6667 (IRC) and join #9000. + +<P> +The latest CVS is version 1.47. There are major changes going on currently +as the code is altered to allow DXSpider to be run under Microsoft Windows. + +There is a separate file for the Windows installation in the /spider/html +and /spider/txt directories so I will not include that here. + +For Linux users, there are several steps to complete to update from +version 1.46. + +PLEASE READ ALL THE FOLLOWING BEFORE STARTING + +<itemize> +<item>tar up your existing perl and cmd directories and put them somewhere +safe so you can revert to the old version if necessary. +<item>Do a CVS update in the normal way (cvs update -d) +<item>cp /spider/perl/Listeners.pm to /spider/local and edit it as below +<item>comment out the spdlogin line in inetd.conf and 'killall -HUP inetd' +<item>"make" the client in /spider/src (just in case it has changed) +<item>restart the cluster and pray :-) +</itemize> + +The Listeners file looks something like this ... + +<tscreen><verb> +# +# Copy this file to /spider/local and modify it to your requirements +# +# +# This file specifies which local interfaces and ports you will be +# listening on +# +# You can add as many as you like +# + +package main; + +use vars qw(@listen); + +@listen = ( +# ["localhost", 7300], +# ["foo.dxcluster.net", 7300], + ); + +1; +</verb></tscreen> + +Alter the hostnames and ports to reflect you setup. This file is only +used for incoming telnet requests. You do not have to use hostnames, it +is quite ok to use IP addresses and it is also a matter of choice whether +or not you add the domain. + +Here is an example of a working Listeners.pm file .. + +<tscreen><verb> +@listen = ( + ["localhost", 8000], + ["sys2", 8000], + ["apu", 8000], + ); +</verb></tscreen> + +Now all this is well and good if you have a static IP address. If your IP +address is dynamic then one line will do, like this ... + +<tscreen><verb> +@listen = ( + ["0.0.0.0", 8000], + ); +</verb></tscreen> + +From this version, the file client.pl has ceased to be needed. In fact it +has been removed. If you are still using client.pl in your ax25d.conf then +replace it with /spider/src/client. + +</article> diff --git a/txt/spiderCVS.txt b/txt/spiderCVS.txt new file mode 100644 index 00000000..78e59f9c --- /dev/null +++ b/txt/spiderCVS.txt @@ -0,0 +1,132 @@ + The DXSpider CVS Changes erratum + Ian Maude, G0VGS, (ianmaude@btinternet.com) + Version 0.1 March 2001 + + A reference for CVS users of the DXSpider DXCluster program. + + If you have any problems with a new CVS version please mail the + support list or come and report on WW Convers channel 9000 or from a + 44 host to sys2.pa4ab.ampr.org (44.137.44.16) port 6667 (IRC) and join + #9000. + + + The latest CVS is version 1.47. There are major changes going on + currently as the code is altered to allow DXSpider to be run under + Microsoft Windows. + + There is a separate file for the Windows installation in the + /spider/html and /spider/txt directories so I will not include that + here. + + For Linux users, there are several steps to complete to update from + version 1.46. + + PLEASE READ ALL THE FOLLOWING BEFORE STARTING + + + +o tar up your existing perl and cmd directories and put them + somewhere safe so you can revert to the old version if necessary. + + +o Do a CVS update in the normal way (cvs update -d) + + +o cp /spider/perl/Listeners.pm to /spider/local and edit it as below + + +o comment out the spdlogin line in inetd.conf and 'killall -HUP + inetd' + + +o "make" the client in /spider/src (just in case it has changed) + + +o restart the cluster and pray :-) + + The Listeners file looks something like this ... + + + + # + # Copy this file to /spider/local and modify it to your requirements + # + # + # This file specifies which local interfaces and ports you will be + # listening on + # + # You can add as many as you like + # + + package main; + + use vars qw(@listen); + + @listen = ( + # ["localhost", 7300], + # ["foo.dxcluster.net", 7300], + ); + + 1; + + + Alter the hostnames and ports to reflect you setup. This file is only + used for incoming telnet requests. You do not have to use hostnames, + it is quite ok to use IP addresses and it is also a matter of choice + whether or not you add the domain. + + Here is an example of a working Listeners.pm file .. + + + + @listen = ( + ["localhost", 8000], + ["sys2", 8000], + ["apu", 8000], + ); + + + + + Now all this is well and good if you have a static IP address. If + your IP address is dynamic then one line will do, like this ... + + + + @listen = ( + ["0.0.0.0", 8000], + ); + + + + + From this version, the file client.pl has ceased to be needed. In + fact it has been removed. If you are still using client.pl in your + ax25d.conf then replace it with /spider/src/client. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + -- 2.43.0