already => '$_[0] already connnected',
anns => 'Announce flag set on $_[0]',
annu => 'Announce flag unset on $_[0]',
+ annts => 'AnnTalk flag set on $_[0]',
+ anntu => 'AnnTalk flag unset on $_[0]',
badnode1 => '$_[0] is now a bad node',
badnode2 => '$_[0] is now a good node',
badnode3 => 'List of Bad Nodes:-',
beepon => 'Beeps are now on',
call1 => 'Callsign lookup via $_[0]:',
conother => 'Sorry $_[0] you are connected to me on another port',
- concluster => 'Sorry $_[0] you are already connected elsewhere on the cluster (on $_[0])',
+ concluster => 'Sorry $_[0] you are already connected elsewhere on the cluster (on $_[1])',
conscript => 'no connect script called \"$_[0]\" found in $main::root/connect',
confail => 'connection to $_[0] failed ($_[1])',
constart => 'connection to $_[0] started',
- disc1 => 'Disconnected by $_[0]',
- disc2 => '$_[0] disconnected',
+ deluser => 'User $_[0] has been deleted',
db1 => 'This database is hosted at $_[0]',
db2 => 'Sorry, but key: $_[0] was not found in $_[1]',
db3 => 'Sorry, database $_[0] doesn\'t exist here',
db10 => '$_[0] records imported into $_[1]',
db11 => 'Sending your request(s) to $_[0], please stand by...',
dfreq1 => 'Invalid freq $_[0] need: eg 0/30000 or hf or hf/cw',
+ disc1 => 'Disconnected by $_[0]',
+ disc2 => 'Channel $_[0] disconnected',
+ disc3 => 'No Channel, but connection $_[0] disconnected',
+ disc4 => 'No Channel or connection but orphan $_[0] disconnected',
+ done => 'Done',
dup => 'Sorry, this is a duplicate',
dx1 => 'Frequency $_[0] not in band (see show/band); usage: DX [BY call] freq call comments',
dx2 => 'Need a callsign; usage: DX [BY call] freq call comments',
+ dx3 => 'The callsign or frequency is invalid',
dxs => 'DX Spots flag set on $_[0]',
dxu => 'DX Spots flag unset on $_[0]',
e1 => 'Invalid command',
e23 => '$_[0] not a range (eg 0/30000)',
e24 => 'Sorry, Internet access is not enabled',
e25 => 'Sorry the value must be between $_[0] and $_[1]',
+ e26 => 'Too many concurrent errors, you are being disconnected',
+ e27 => '$_[0] not a numeric or a callsign prefix',
echoon => 'Echoing enabled',
echooff => 'Echoing disabled',
export2 => '$_[3] has error exporting msg $_[0] to $_[1] ($_[2])',
export3 => '$_[2 ] exported msg $_[0] to $_[1]',
filter1 => 'Filter $_[0] updated for $_[1]',
- filter2 => 'Need a value for $_[0]',
+ filter2 => 'Unknown filter keyword $_[0]',
filter3 => 'No filters defined for $_[0]',
filter4 => '$_[0]$_[1] Filter $_[2] deleted for $_[3]',
filter5 => 'need some filter commands...',
filter6 => '$_[0]$_[1] Filter for $[2] not found',
grids => 'DX Grid flag set on $_[0]',
gridu => 'DX Grid flag unset on $_[0]',
+ illcall => 'Sorry, $_[0] is an invalid callsign',
hasha => '$_[0] already exists in $_[1]',
hashb => '$_[0] added to $_[1]',
hashc => '$_[0] removed from $_[1]',
iso => '$_[0] Isolated',
isou => '$_[0] UnIsolated',
isoc => '$_[0] created and Isolated',
+ isoari => 'there is an input route filter for $_[0]; clear/route input $_[0] first',
+ isoaro => 'there is an output route filter for $_[0]; clear/route $_[0] first',
+ isow => '$_[0] is isolated; unset/isolate $_[0] first',
l1 => 'Sorry $_[0], you are already logged on on another channel',
- l2 => 'Hello $_[0], this is $main::mycall in $main::myqth running DXSpider V$main::version',
+ l2 => 'Hello $_[0], this is $main::mycall in $main::myqth\nrunning DXSpider V$main::version build $main::build',
lang => 'Language is now $_[0]',
lange1 => 'set/language <lang> where <lang> is one of ($_[0])',
lange2 => 'failed to set language on $_[0]',
msg3 => 'Msg $_[0]: $_[1] changed from $_[2] to $_[3]',
msgu => 'usage: msg <cmd> <msgno> data...',
merge1 => 'Merge request for $_[1] spots and $_[2] WWV sent to $_[0]',
- moon => 'Location Rise Set Azim Elev RGain dB',
+ moon => 'Location dd/mm/yyyy Rise Set',
+ moon_with_azel => 'Location dd/mm/yyyy Rise Set Azim Elev',
mond => 'Monitoring Disabled',
mone => 'Monitoring Enabled',
namee1 => 'Please enter your name, set/name <your name>',
name => 'Your name is now \"$_[0]\"',
nodea => '$_[0] set as AK1A style Node',
nodeac => '$_[0] created as AK1A style Node',
+ nodeb => '$_[0] set as BBS',
+ nodebc => '$_[0] created as BBS',
nodec => '$_[0] set as CLX style Node',
nodecc => '$_[0] created as CLX style Node',
noder => '$_[0] set as AR-Cluster style Node',
nodexc => '$_[0] created as DXNET style Node',
nodeu => '$_[0] set back as a User',
nodee1 => 'You cannot use this command whilst your target ($_[0]) is on-line',
+ notdone => 'NOT Done',
+ nothere => 'Sorry, but $_[0] isn\'t here at the moment, please try later',
obscount => 'Ping obsolescence count on $_[0] set to $_[1]',
ok => 'Operation successful',
outconn => 'Outstanding connect to $_[0]',
sqra => 'Cluster QRA Locator$_[0], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
sorry => 'Sorry',
spf1 => 'spoof: creating new user $_[0]',
- sun => 'Location Rise Set Azim Elev',
+ stathf => 'HF DX Spot Stats, last 31 days',
+ stathft => 'HF DX Spot Stats, last 31 days for DXCC $_[0]',
+ statvhf => 'VHF+ DX Spot Stats, last 31 days',
+ statvhft => 'VHF+ DX Spot Stats, last 31 days for DXCC $_[0]',
+ statdx => 'Total DX Spots last 31 days',
+ sun => 'Location dd/mm/yyyy Rise Set',
+ sun_with_azel => 'Location dd/mm/yyyy Rise Set Azim Elev',
suser1 => 'usage: callsign user_field_name value',
suser2 => 'User $_[0] not found',
suser3 => 'User field \'$_[0]\' was \'$_[1]\' now set to \'$_[2]\'',
talku => 'Talk flag unset on $_[0]',
talkend => 'Finished talking to you',
talkinst => 'Entering Talkmode, /EX to end, /<cmd> to run a command',
+ talknh => 'Sorry $_[0] is not online at the moment',
talkprompt => 'Talk ($_[0])>',
talkstart => 'Starting talking to you',
usernf => '*** User record for $_[0] not found ***',
},
sp => {
addr => 'Dirección es ahora: $_[0]',
- already => '$_[0] ya esta conctado',
+ already => '$_[0] ya esta conectado',
anns => 'Anuncios activados $_[0]',
annu => 'Anuncios desactivados $_[0]',
- badnode1 => '$_[0] es ahora un nodo malo',
- badnode2 => '$_[0] es ahora un nodo bueno',
- badnode3 => 'Lista de nodos malos:-',
+ annts => 'AnnTalk activados $_[0]',
+ anntu => 'AnnTalk desactivados $_[0]',
+ badnode1 => '$_[0] es ahora un nodo indeseado',
+ badnode2 => '$_[0] es ahora un nodo normal',
+ badnode3 => 'Lista de nodos indeseados:-',
bbse1 => 'Por favor introduce la dirección de tu BBS,, set/bbs <tu bbs>',
bbs => 'Tu BBS es ahora \"$_[0]\"',
beepoff => 'Beeps desactivados',
call1 => 'Callsign lookup via $_[0]:',
conother => 'Lo siento $_[0] ya estás conectado en otro puerto',
concluster => 'Lo siento $_[0] ya estás conectado en otro cluster',
- conscript => 'no connect script called \"$_[0]\" found in $main::root/connect',
+ conscript => 'no hay ningun script que se llame \"$_[0]\" en $main::root/connect',
confail => 'conexión con $_[0] fallida ($_[1])',
constart => 'conexión con $_[0] ha comenzado',
-
- disc1 => 'Desconectado por $_[0]',
- disc2 => '$_[0] desconectado',
+ deluser =>'El usuario $_[0] ha sido borrado',
db1 => 'Esta base de datos está en $_[0]',
db2 => 'Lo siento, pero la palabra: $_[0] no se encontró en $_[1]',
db3 => 'Lo siento, la base de datos $_[0] no existe aquí',
db9 => 'Base de datos $_[0] borrada',
db10 => '$_[0] records imported into $_[1]',
db11 => 'Petición enviada a $_[0], por favor espera...',
- dfreq1 => 'Invalid freq $_[0] need: eg 0/30000 or hf or hf/cw',
+ dfreq1 => 'Frecuencia invalida $_[0] se necesita: ej 0/30000 o hf o hf/cw',
+ disc1 => 'Desconectado por $_[0]',
+ disc2 => '$_[0] desconectado',
+ disc3 => 'No Channel, but connection $_[0] disconnected',
+ disc4 => 'No Channel or connection but orphan $_[0] disconnected',
+ done => 'Hecho',
dup => 'Lo siento, esto es un duplicado',
dx1 => 'Frecuencia $_[0] fuera de banda (ver show/band); usa: DX [BY indicativo] frec indic. comentario',
dx2 => 'Necesita indicativo; usa: DX [BY indicativo] frec indic. comentario',
- dxs => 'DX Spots activado $_[0]',
+ dx3 => 'El indicativo o la frecuencia es incorrecta',
+ dxs => 'DX Spots activado $_[0]',
dxu => 'DX Spots desactivado $_[0]',
e1 => 'Comando inválido',
e2 => 'Error: $_[0]',
e23 => '$_[0] fuera de rango (ej: 0/30000)',
e24 => 'Lo siento, el acceso a internet no está habilitado',
e25 => 'Lo siento el valor debe de estar entre $_[0] y $_[1]',
-
- echoon => 'Habilitado eco',
+ e26 => 'Demasiados errores, seras desconectado',
+ e27 => '$_[0] no es un numero o un prefijo',
+ echoon => 'Habilitado eco',
echooff => 'Deshabilitado eco',
echow => '*Eco está ahora deshabilitado, set/echo para habilitar',
- emaile1 => 'Por favor introduce tu E-mail, set/email <tu e-mail>',
+ emaile1 => 'Por favor introduce tu E-mail, set/email <tu E-mail>',
emaila => 'Tu dirección de E-Mail es ahora \"$_[0]\"',
email => 'E-mail es ahora: $_[0]',
export1 => 'usa: export <msgno> <filename>',
filter6 => '$_[0]$_[1] Filtro para $[2] no encontrado',
grids => 'DX Grid está activado $_[0]',
gridu => 'DX Grid está desavtivado $_[0]',
-
- hasha => '$_[0] ya existe en $_[1]',
+ illcall => 'Lo siento,$_[0] no es un indicativo valido',
+ hasha => '$_[0] ya existe en $_[1]',
hashb => '$_[0] añadido a $_[1]',
hashc => '$_[0] eliminado desde $_[1]',
hashd => '$_[0] no en $_[1]',
hashe => '$_[0] activado $_[1]',
helpe1 => 'La ayuda no esta disponible, avisa al sysop',
helpe2 => 'No hay ayuda disponible en $_[0]',
- heres => 'Here activado $_[0]',
+ heres => 'Estas presente $_[0]',
heade1 => 'Usando $main::mycall Coords, se recomienda usar set/location o set/qra',
- hereu => 'Here desactivado $_[0]',
+ hereu => 'Estas ausente $_[0]',
homebbs => 'Tu BBS es ahora: $_[0]',
homenode => 'Tu Nodo habitual es ahora: $_[0]',
hnodee1 => 'Por favor introduce tu nodo local, set/homenode <tu DXCluster local>',
- hnodee2 => 'Fallo al poner homenode on $_[0]',
+ hnodee2 => 'Fallo al poner homenode en $_[0]',
hnode => 'Tu nodo habitual es ahora \"$_[0]\"',
init1 => 'enviando mensaje de inicialización a $_[0]',
iso => '$_[0] Aislado',
- isou => '$_[0] Desaislado',
+ isou => '$_[0] en red',
isoc => '$_[0] creado y aislado',
- l1 => 'Lo siento $_[0], ya estás conectado en otro canal',
+ isoari => 'Ya hay un input route filter para $_[0]; clear/route input $_[0] primero',
+ isoaro => 'Ya hay un output route filter para $_[0]; clear/route $_[0] primero',
+ isow => '$_[0] esta aislado; unset/isolate $_[0] primero',
+ l1 => 'Lo siento $_[0], ya estás conectado en otro canal',
l2 => 'Hola $_[0], este es $main::mycall en $main::myqth usando DXSpider V$main::version',
lang => 'El idioma es ahora $_[0]',
lange1 => 'set/language <lang> cuando <lang> es uno de ($_[0])',
lh1 => '$main::data/hop_table.pl no existe',
loce1 => 'Por favor introduce tu posición, set/location <latitud longitud>',
loce2 => 'No reconocida \"$_[0]\" como una Lat/Long (eg 52 20 N 0 16E)',
- loc => 'Tu Lat/Long es ahora \"$_[0]\"',
+ loce3 => '$_[0] es un QRA locator, por favor usa: set/qra $_[0]',
+ loc => 'Tu Lat/Long es ahora \"$_[0]\"',
lockout => '$_[0] Boloqueado',
lockoutc => '$_[0] Creado y bloqueado',
lockoutun => '$_[0] Desbloqueado',
m6 => 'Reenviado a: $_[0]',
m7 => 'Título : $_[0]',
m8 => 'Introduce mensaje /EX para enviar o /ABORT para salir',
- m9 => 'Hay correo nuevo para ti',
+ m9 => 'Hay correo nuevo para ti.Borralo una vez leido.',
m10 => 'mensaje interrumpido',
m11 => 'mensaje nr $_[0] guardado y enviado a $_[1]',
m12 => 'mensaje nr $_[0] borrado',
msg3 => 'Msg $_[0]: $_[1] cambiado en $_[2] to $_[3]',
msgu => 'usa: msg <cmd> <msgno> data...',
merge1 => 'Petición de envío desde $_[1] spots y $_[2] WWV enviados a $_[0]',
- moon => 'QTH Salida Puesta Azim Elev RGain dB',
- namee1 => 'Por favor, introduce tu nombre set/name <tu nombre>',
+ moon => 'QTH dd/mm/yyyy Salida Puesta',
+ moon_with_azel => 'QTH dd/mm/yyyy Salida Puesta Azim Elev',
+ mond => 'Monitorado deshabilitado',
+ mone => 'Monitorado habilitado',
+ namee1 => 'Por favor, introduce tu nombre set/name <tu nombre>',
namee2 => 'No se encuentra el usuario $_[0]!',
name => 'Tu nombre es ahora \"$_[0]\"',
- nodea => '$_[0] set as AK1A style Node',
- nodeac => '$_[0] created as AK1A style Node',
- nodec => '$_[0] set as CLX style Node',
- nodecc => '$_[0] created as CLX style Node',
- noder => '$_[0] set as AR-Cluster style Node',
- noderc => '$_[0] created as AR-Cluster style Node',
- nodes => '$_[0] set as DXSpider style Node',
- nodesc => '$_[0] created as DXSpider style Node',
- nodex => '$_[0] set as DXNET style Node',
- nodexc => '$_[0] created as DXNET style Node',
+ nodea => '$_[0] fijado como nodo AK1A ',
+ nodeac => '$_[0] creado como nodo AK1A ',
+ nodeb => '$_[0] fijado como BBS',
+ nodebc => '$_[0] creado como BBS',
+ nodec => '$_[0] fijado como nodo CLX ',
+ nodecc => '$_[0] creado como nodo CLX ',
+ noder => '$_[0] fijado como nodo AR-Cluster ',
+ noderc => '$_[0] creado como nodo AR-Cluster ',
+ nodes => '$_[0] fijado como nodo DXSpider ',
+ nodesc => '$_[0] creado como nodo DXSpider ',
+ nodex => '$_[0] fijado como nodo DXNET ',
+ nodexc => '$_[0] creado como nodo DXNET ',
nodeu => '$_[0] es ahora un usuario',
nodee1 => 'You cannot use this command whilst your target ($_[0]) is on-line',
- obscount => 'Ping obsolescence count on $_[0] set to $_[1]',
+ notdone => 'NO se pudo hacer',
+ nothere => 'Lo siento, pero $_[0] no esta aqui ahora, intentalo mas tarde',
+ obscount => 'Ping obsolescence count on $_[0] set to $_[1]',
ok => 'Operación realizada',
outconn => 'Iniciando conexion con $_[0]',
page => 'Teclea Enter para continuar, A para abortar ($_[0] lineas) >',
qthe1 => 'Por favor introduce tu QTH, set/qth <tu qth>',
qth => 'Tu QTH es ahora \"$_[0]\"',
qrae1 => 'Por favor introduce tu QRA locator, set/qra <qra locator> (ej: set/qra JO02LQ)', qrashe1 => 'Por favor introduce un QRA locator, ej sh/qra JO02LQ o sh/qra JO02LQ IO93NS', qrae2 => 'No reconocido \"$_[0]\" como un QRA locator (ej JO02LQ)',
- qra => 'Tu QRA Locator es ahora \"$_[0]\"',
+ qrashe1 => 'Por favor introduce un QRA locator, ej set/qra JO02LQ o sh/qra JO02LQ IO93NS',
+ qrae2 => 'No se reconocio \"$_[0]\" como un QRA locator ( ej JO02LQ)',
+ qra => 'Tu QRA Locator es ahora \"$_[0]\"',
rcmdo => 'RCMD \"$_[0]\" enviado a $_[1]',
rec => '$_[0] records',
read1 => 'Lo siento, no hay mensajes nuevos para ti',
sqra => 'Cluster QRA Locator$_[0], NO OLVIDES CAMBIAR TU DXVars.pm',
sorry => 'Lo siento',
spf1 => 'spoof: creando nuevo usuario $_[0]',
- sun => 'QTH Salida Puesta Azim Elev',
- suser1 => 'usa: indicativo user_field_name value',
+ stathf => 'HF DX Spot Stats, ultimos 31 dias',
+ stathft => 'HF DX Spot Stats, ultimos 31 dias para DXCC $_[0]',
+ statvhf => 'VHF+ DX Spot Stats, ultimos 31 dias',
+ statvhft => 'VHF+ DX Spot Stats, ultimos 31 dias para DXCC $_[0]',
+ statdx => 'Total DX Spots ultimos 31 dias',
+ sun => 'QTH dd/mm/yyyy Salida Puesta',
+ sun_with_azel => 'QTH dd/mm/yyyy Salida Puesta Azim Elev',
+ suser1 => 'usa: indicativo user_field_name value',
suser2 => 'Usuario $_[0] no encontrado',
suser3 => 'User field \'$_[0]\' was \'$_[1]\' now set to \'$_[2]\'',
suser4 => 'User field name \'$_[0]\' doesn\'t exist',
wxu => 'WX desactivado $_[0]',
},
);
+
+
projects / spider.git / blobdiff