[Dxspider-support] Talk command and beam heading command

[Keith]

 Hi Dirk

 

I have had the following comments from users.

 

Using the SH/H VK results in the beam heading being sent to the user twice
I have tried this command and can confirm that this dose happen.

 

Using the talk command it has been reported be several user that if both
stations are connected by telnet talk works ok

If both stations are connect via RF talk works ok

 

If one station is connected via telnet and the other connected via RF talk
only works from the telnet station to the RF station but not the other way

I can't see what the difference could be but I have not been able to
reproduce this maybe it is down to other nodes not as up-to-date as they
could be?

 

Thanks for your hard work with the talk function.

 

73 Keith GU6EFB GB7DXG-1 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.tobit.co.uk/pipermail/dxspider-support/attachments/20071011/758a5a0c/attachment.htm