3 # this file contains the system messages. Don't forget to reload them
4 # if you change them (load/messages)
12 addr => q{Address set to: $_[0]},
13 agwe => q{AGW Engine enabled},
14 agwu => q{AGW Engine disabled},
15 already => q{$_[0] already connected},
16 anns => q{Announces enabled for $_[0]},
17 annu => q{Announces disabled for $_[0]},
18 annts => q{AnnTalk enabled for $_[0]},
19 anntu => q{AnnTalk disabled for $_[0]},
21 badnode1 => q{$_[0] is now a bad node},
22 badnode2 => q{$_[0] is now a good node},
23 badnode3 => q{List of Bad Nodes:-},
24 bbse1 => q{Please enter your BBS address,, set/bbs <your bbs address>},
25 bbs => q{Your BBS Address is now "$_[0]"},
26 beepoff => q{Beeps are now off},
27 beepon => q{Beeps are now on},
28 believes => q{Believe node $_[0] via $_[1]},
29 believeu => q{Don't believe node $_[0] via $_[1]'},
30 buddya => q{$_[0] has been added to your buddies},
31 buddyu => q{$_[0] has been removed from your buddies},
32 call1 => q{Callsign lookup via $_[0]:},
33 chatend => q{Finished chatting on $_[0]},
34 chatinst => q{Entering Chatmode on $_[0], /EX to end, /<cmd> to run a command},
35 chatprompt => q{Chat ($_[0])>},
36 chattoomany => q{Not allowed, already in $_[1], use /chat $_[0]},
37 cluster => q{Nodes: $_[0]/$_[1] Users [Loc/Clr]: $_[2]/$_[3] Max: $_[4]/$_[5] - Uptime: $_[6]},
38 conother => q{Sorry $_[0] you are connected to me on another port},
39 concluster => q{Sorry $_[0] you are already connected elsewhere on the cluster (on $_[1])},
40 contomany => q{Sorry $_[0] but you are already connected to $_[1] other nodes (on $_[2])},
41 conscript => q{no connect script called "$_[0]" found in $main::root/connect},
42 confail => q{connection to $_[0] failed ($_[1])},
43 constart => q{connection to $_[0] started},
44 conbump => q{Reconnected as $_[0] at $_[1], this instance is disconnected},
45 creuser => q{User $_[0] has been created},
46 deluser => q{User $_[0] has been deleted},
47 db1 => q{This database is hosted at $_[0]},
48 db2 => q{Sorry, but key: $_[0] was not found in $_[1]},
49 db3 => q{Sorry, database $_[0] doesn't exist here},
50 db4 => q{Sorry, database $_[0] located at $_[1] isn't currently online},
51 db5 => q{Accessing remote database on $_[0]...standby...},
52 db6 => q{Database $_[0] already exists, delete it first},
53 db7 => q{Database $_[0] created for remote node $_[1]},
54 db8 => q{Database $_[0] created locally},
55 db9 => q{Database $_[0] removed},
56 db10 => q{$_[0] records imported from $_[1] to $_[2]},
57 db11 => q{Sending your request(s) to $_[0], please stand by...},
58 db12 => q{DB Name Location Cmd Chain},
59 db13 => q{$_[0] records exported from $_[1] to $_[2]},
60 dfreq1 => q{Invalid freq $_[0] need: eg 0/30000 or hf or hf/cw'},
61 dir1 => q{No messages found},
62 disc1 => q{Disconnected by $_[0]},
63 disc2 => q{Channel $_[0] disconnected},
64 disc3 => q{No Channel, but connection $_[0] disconnected},
65 disc4 => q{No Channel or connection but orphan $_[0] disconnected},
67 dup => q{Sorry, this is a duplicate},
68 dx1 => q{Frequency $_[0] not in band (see show/band); usage: DX [BY call] freq call comments},
69 dx2 => q{Need a callsign; usage: DX [BY call] freq call comments},
70 dx3 => q{The callsign or frequency is invalid},
71 dx4 => q{The ip address ($_[0]) is invalid},
72 dxcqs => q{DX CQ Zones enabled for $_[0]},
73 dxcqu => q{DX CQ Zones disabled for $_[0]},
74 dxitus => q{DX ITU Zones enabled for $_[0]},
75 dxituu => q{DX ITU Zones disabled for $_[0]},
76 dxs => q{DX Spots enabled for $_[0]},
77 dxu => q{DX Spots disabled for $_[0]},
78 e1 => q{Invalid command},
79 e2 => q{Error: $_[0]},
80 e3 => q{$_[0]: $_[1] not found},
81 e4 => q{Need at least a prefix or callsign},
83 e6 => q{*** No station specified ***},
84 e7 => q{callsign $_[0] not visible on the cluster},
85 e8 => q{Need a callsign and some text},
86 e9 => q{Need at least some text},
87 e10 => q{$_[0] not connected locally},
88 e11 => q{Can't use $_[0] as target},
89 e12 => q{Need a node callsign},
90 e13 => q{$_[0] is not a node},
91 e14 => q{First argument must be numeric and > 0},
92 e15 => q{invalid qualifier "$_[0]"},
93 e16 => q{File "$_[0]" exists},
94 e17 => q{Please don't use the words: @_ on here},
95 e18 => q{Cannot connect to $_[0] ($!)},
96 e19 => q{Invalid character(s) in line $_[0]},
97 e20 => q{token '$_[0]' not recognised},
98 e21 => q{$_[0] is not numeric},
99 e22 => q{$_[0] is not a callsign},
100 e23 => q{$_[0] is not a range (eg 0/30000)},
101 e24 => q{Sorry, Internet access is not enabled},
102 e25 => q{Sorry the value must be between $_[0] and $_[1]},
103 e26 => q{Too many concurrent errors, you are being disconnected},
104 e27 => q{$_[0] not a numeric or a callsign prefix'},
105 e28 => q{Sorry, you need to be registered (SP $main::myalias to register)},
106 e29 => q{Need a password},
107 e30 => q{Cannot Open $_[0] $!},
108 e31 => q{$_[0] is not a user'},
109 e32 => q{Need a passphrase},
110 e33 => q{$_[0] is not a number of days or a valid date},
111 e34 => q{Need a GROUP and some text},
112 e35 => q{You are not a member of $_[0], join $_[0]},
113 e36 => q{You can only do this in normal user prompt state},
114 e37 => q{Need at least a callsign},
115 e38 => q{This is not a valid regex},
116 e39 => q{Sorry $_[0] is not a valid argument},
118 echoon => q{Echoing enabled},
119 echooff => q{Echoing disabled},
120 echow => q{*Echoing is currently disabled, set/echo to enable},
121 emaile1 => q{Please enter your email address, set/email <your e-mail address>},
122 emaila => q{Your E-Mail Address is now "$_[0]"},
123 email => q{E-mail address set to: $_[0]},
124 export1 => q{usage: export <msgno> <filename>},
125 export2 => q{$_[3] has error exporting msg $_[0] to $_[1] ($_[2])},
126 export3 => q{$_[2 ] exported msg $_[0] to $_[1]},
127 filter1 => q{Filter $_[0] updated for $_[1]},
128 filter2 => q{Unknown filter keyword $_[0]},
129 filter3 => q{No filters defined for $_[0]},
130 filter4 => q{$_[0]$_[1] Filter $_[2] deleted for $_[3]},
131 filter5 => q{need some filter commands...},
132 filter6 => q{$_[0]$_[1] Filter for $[2] not found},
133 filter7 => q{$_[0] parse error $_[1] on $_[2]'},
134 grayline1 => q{ Beg of End of},
135 grayline2 => q{Location dd/mm/yyyy Dawn Rise Set Dusk},
136 grids => q{DX Grid enabled for $_[0]},
137 gridu => q{DX Grid disabled for $_[0]},
138 gtks => q{GTK output enabled for $_[0]},
139 gtku => q{GTK output disabled for $_[0]},
140 illcall => q{Sorry, $_[0] is an invalid callsign},
141 hasha => q{$_[0] already exists in $_[1]},
142 hashb => q{$_[0] added to $_[1]},
143 hashc => q{$_[0] removed from $_[1]},
144 hashd => q{$_[0] not in $_[1]'},
145 hashe => q{$_[0] set on $_[1]'},
146 heading => q{Heading},
147 helpe1 => q{Help system unavailable, tell sysop},
148 helpe2 => q{No help available on $_[0]},
149 heres => q{Here set on $_[0]},
150 heade1 => q{Using $main::mycall Coords, consider doing a set/location or set/qra},
151 hereu => q{Here unset on $_[0]},
152 homebbs => q{Home BBS set to: $_[0]},
153 homenode => q{Home Node set to: $_[0]},
154 homenode2 => q{Home Node},
155 hnodee1 => q{Please enter your Home Node, set/homenode <your home DX Cluster>},
156 hnodee2 => q{Failed to set homenode on $_[0]},
157 hnode => q{Your Homenode is now "$_[0]"},
158 init1 => q{sent initialisation message to $_[0]},
159 iso => q{$_[0] Isolated},
160 isou => q{$_[0] UnIsolated},
161 isoc => q{$_[0] created and Isolated},
162 isoari => q{there is an input route filter for $_[0]; clear/route input $_[0] first},
163 isoaro => q{there is an output route filter for $_[0]; clear/route $_[0] first},
164 isow => q{$_[0] is isolated; unset/isolate $_[0] first},
165 join => q{joining group $_[0]},
166 l1 => q{Sorry $_[0], you are already logged on on another channel},
167 l2 => q{Hello $_[0], this is $main::mycall in $main::myqth\nrunning DXSpider V$main::version build $main::build},
168 lang => q{Language is now English},
169 lange1 => q{set/language <lang> where <lang> is one of ($_[0])},
170 lange2 => q{failed to set language on $_[0]'},
171 lastconn => q{Last connect},
172 leave => q{leaving group $_[0]},
173 lgset => q{Added $_[0] to the local node group},
174 lgunset => q{Removed $_[0] from the local node group},
175 lh1 => q{$main::data/hop_table.pl doesn't exist},
177 loce1 => q{Please enter your location,, set/location <latitude longitude>},
178 loce2 => q{Cannot recognise "$_[0]" as a Lat/Long (eg 52 20 N 0 16 E)},
179 loce3 => q{$_[0] is a QRA locator, please use: set/qra $_[0]},
180 loc => q{Your Lat/Long is now "$_[0]"},
181 location => q{Location},
182 lockout => q{$_[0] Locked out},
183 lockoutc => q{$_[0] Created and Locked out},
184 lockoutun => q{$_[0] Unlocked},
185 lockoutuse => q{usage: sh/lockout <call>|ALL},
186 loginb => q{Buddy $_[0] has logged in},
187 loginbn => q{Buddy $_[0] has logged in at $_[1]},
188 logoutb => q{Buddy $_[0] has logged out},
189 logoutbn => q{Buddy $_[0] has logged out from $_[1]},
190 loginu => q{User $_[0] has logged in},
191 logoutu => q{User $_[0] has logged out},
192 loginn => q{Node $_[0] has logged in},
193 logoutn => q{Node $_[0] has logged out},
194 m1 => q{Enter Subject (30 characters):},
195 m2 => q{Copy of msg $_[0] sent to $_[1]},
196 m3 => q{Sorry, $_[0] is an unacceptable TO address},
197 m4 => q{Sorry, can't access message $_[0]},
198 m5 => q{Sorry, I need a message number'},
199 m6 => q{Reply to: $_[0]},
200 m7 => q{Subject : $_[0]},
201 m8 => q{Enter lines of text, /EX to send or /ABORT to exit},
202 m9 => q{New mail has arrived for you},
203 m10 => q{Message/Script Aborted},
204 m11 => q{Message no $_[0] saved and directed to $_[1]},
205 m12 => q{Message no $_[0] deleted},
206 m13 => q{Message no $_[0] missing},
207 m14 => q{Message no $_[0] marked as sent to $_[1]},
208 m15 => q{Message no $_[0] unmarked as sent to $_[1]},
209 m16 => q{Need a Message number},
210 m17 => q{Sorry, cannot send messages in $_[0] mode},
211 m18 => q{Sorry, message $_[0] is currently set to KEEP},
212 m19 => q{Startup Script for $_[0] saved, $_[1] lines},
213 m20 => q{Startup Script for $_[0] deleted},
214 m21 => q{$_[0] Working...},
215 m22 => q{Startup Script for $_[0] not found/error $!},
216 maxconnect => q{Max connections on $_[0] set to $_[1]},
217 msg1 => q{Bulletin Messages Queued},
218 msg2 => q{Private Messages Queued},
219 msg3 => q{Msg $_[0]: $_[1] changed from $_[2] to $_[3]},
220 msgu => q{usage: msg <cmd> <msgno> data...},
221 merge1 => q{Merge request for $_[1] spots and $_[2] WWV sent to $_[0]},
222 moon => q{Location dd/mm/yyyy Rise Set},
223 moon_with_azel => q{Location dd/mm/yyyy Rise Set Azim Elev},
224 mond => q{Monitoring Disabled},
225 mone => q{Monitoring Enabled},
227 namee1 => q{Please enter your name, set/name <your name>},
228 namee2 => q{Can't find user $_[0]!},
229 name => q{Your name is now "$_[0]"},
230 nodea => q{$_[0] set as AK1A style Node},
231 nodeac => q{$_[0] created as AK1A style Node},
232 nodeb => q{$_[0] set as BBS},
233 nodebc => q{$_[0] created as BBS},
234 nodec => q{$_[0] set as CLX style Node},
235 nodecc => q{$_[0] created as CLX style Node},
236 noder => q{$_[0] set as AR-Cluster style Node},
237 noderc => q{$_[0] created as AR-Cluster style Node},
238 nodes => q{$_[0] set as DXSpider style Node},
239 nodesc => q{$_[0] created as DXSpider style Node},
240 noden => q{$_[0] set as RBN Feed },
241 nodenc => q{$_[0] created as RBN Feed},
242 nodex => q{$_[0] set as DXNET style Node},
243 nodexc => q{$_[0] created as DXNET style Node},
244 nodeu => q{$_[0] set back as a User},
245 nodee1 => q{You cannot use this command whilst your target ($_[0]) is on-line},
246 notdone => q{NOT Done},
247 nothere => q{Sorry, but $_[0] isn't here at the moment, please try later'},
248 obscount => q{Ping obsolescence count on $_[0] set to $_[1]},
249 ok => q{Operation successful},
250 outconn => q{Outstanding connect to $_[0]},
251 page => q{Press Enter to continue, A to abort ($_[0] lines) >},
252 pagelth => q{Page Length is now $_[0] lines},
253 pagewidth => q{Page width is now $_[0] columns},
254 passerr => q{Please use: SET/PASS <password> <callsign>},
255 passphrase => q{Passphrase set or changed for $_[0]},
256 passphraseu => q{Passphrase removed for $_[0]},
257 password => q{Password set or changed for $_[0]},
258 passwordu => q{Password removed for $_[0]},
259 pc90s => q{PC90 enabled for $_[0]},
260 pc90u => q{PC90 disabled $_[0]},
261 pingo => q{Ping Started to $_[0]},
262 pingi => q{Ping Returned from $_[0] $_[1] (Ave $_[2]) secs},
263 pinge1 => q{Cannot ping yourself!},
264 pingint => q{Ping interval on $_[0] set to $_[1] secs},
265 'pos' => q{From Callsign: $_[0] Lat: $_[1] Long: $_[2]},
266 pr => q{%C de %M %D %T dxspider >},
267 prs => q{Prompt is changed},
268 pru => q{Prompt now set back to default},
269 priv => q{Privilege level changed on $_[0]},
270 prx => q{$main::mycall >},
271 pw0 => q{Enter old password: },
272 pw1 => q{Enter new password: },
273 pw2 => q{Re-enter new password: },
274 pw3 => q{Password changed},
275 pw4 => q{Passwords differ, password NOT changed},
276 qll => q{Please enter your location with set/location or set/qra},
277 qthe1 => q{Please enter your QTH, set/qth <your qth>},
278 qth => q{Your QTH is now "$_[0]"},
279 qrae1 => q{Please enter your QRA locator, set/qra <qra locator> (eg set/qra JO02LQ)},
280 qrashe1 => q{Please enter a QRA locator, eg sh/qra JO02LQ or sh/qra JO02LQ IO93NS},
281 qrae2 => q{Cannot recognise "$_[0]" as a QRA locator (eg JO02LQ)},
282 qra => q{Your QRA Locator is now "$_[0]"},
283 rbnusers => qq{RBN User List},
284 qsl1 => q{Call Manager Times Last Time Seen De},
285 rcmdo => q{RCMD "$_[0]" sent to $_[1]},
286 read1 => q{Sorry, no new messages for you},
287 read2 => q{Msg $_[0] not found},
288 read3 => q{Msg $_[0] not available},
289 rec => q{$_[0] records},
290 reg => q{$_[0] registered},
291 regc => q{$_[0] created and registered},
292 reginac => q{Registration is not active (set/var $main::reqreg = 1 to activate)},
293 regun => q{$_[0] unregistered},
294 route => q{$_[0] on $_[1] via $_[2]},
295 sat1 => q{Tracking Table for $_[0] for the next $_[1] hours every $_[2] mins},
296 sat2 => q{dd/mm UTC Lat Lon Alt Km Az El Dist Km},
297 sat3 => q{Syntax: SH/SAT <name> [<hours> <interval>]},
298 sat4 => q{Satellites available/Age of Keps (days):-},
299 sat5 => q{need nnnnn.AMSAT in subject to load keps from this message},
300 satnf => q{Satellite $_[0] unknown},
302 set => q{$_[0] enabled for $_[1]},
303 sethop1 => q{usage: set/hops <call> ann|spots|wwv|wcy <no of hops>},
304 sethop2 => q{$_[0] hops set on $_[1]$_[2] for $_[3]'},
305 sethop3 => q{No hops set for $_[0]'},
306 showconf => q{Node Callsigns},
307 shu => q{"SHU" is not enough! you need to type at least "SHUT" to shutdown the node},
308 shutting => q{$main::mycall shutting down...},
309 skims => q{RBN/Skimming set to $_[1] for $_[0]},
310 sloc => q{Cluster lat $_[0] long $_[1], DON'T FORGET TO CHANGE YOUR DXVars.pm},
311 snode1 => q{Node Call Sort Version},
312 snode2 => q{$_[0] $_[1] $_[2]},
313 snode3 => q{$_[0] Unknown Call},
314 sqra => q{Cluster QRA Locator$_[0], DON'T FORGET TO CHANGE YOUR DXVars.pm},
316 spf1 => q{spoof: creating new user $_[0]},
317 stathf => q{HF DX Spot Stats, last $_[1] days from $_[0]},
318 stathft => q{HF DX Spot Stats, last $_[2] days from $_[1] for DXCC $_[0]},
319 statvhf => q{VHF+ DX Spot Stats, last $_[1] days from $_[0]},
320 statvhft => q{VHF+ DX Spot Stats, last $_[2] days from $_[1] for DXCC $_[0]},
321 statdx => q{Total DX Spots for $_[1] days from $_[0]},
322 storable => q{Please load the Storable module from CPAN'},
323 sun => q{Location dd/mm/yyyy Rise Set},
324 sun_with_azel => q{Location dd/mm/yyyy Rise Set Azim Elev},
325 susdb1 => q{usage: callsign state city},
326 susdb2 => q{USDB $_[0] was $_[1], $_[2]},
327 susdb3 => q{USDB $_[0] now $_[1], $_[2]},
328 susdb4 => q{USDB $_[0] deleted},
329 suser1 => q{usage: callsign user_field_name value},
330 suser2 => q{User $_[0] not found},
331 suser3 => q{User field '$_[0]' was '$_[1]' now set to '$_[2]'},
332 suser4 => q{User field name '$_[0]' doesn't exist},
333 time1 => q{Local Time: $_[0] $_[1], UTC $_[2]},
334 time2 => q{$_[0] Local (standard) time: $_[1] ($_[2] Hours)},
335 time3 => q{$_[0] $_[1]},
336 talks => q{Talk enabled for $_[0]},
337 talku => q{Talk disabled for $_[0]},
338 talkend => q{Finished talking to you},
339 talkinst => q{Entering Talkmode, /EX to end, /<cmd> to run a command},
340 talknh => q{Sorry $_[0] is not online at the moment},
341 talkprompt => q{Talk ($_[0])>},
342 talkstart => q{Starting talking to you},
343 unset => q{$_[0] disabled for $_[1]},
344 unsethop1 => q{usage: unset/hops <call> ann|spots|wwv|wcy},
345 unsethop2 => q{hops unset on $_[1] for $_[0]'},
347 userconn => q{Callsigns connected to},
348 usernf => q{*** User record for $_[0] not found ***},
349 usstates => q{US State display enabled for $_[0]},
350 usstateu => q{US State display disabled for $_[0]},
351 wante => q{Want $_[0] enabled for $_[1]},
352 wantd => q{Want $_[0] disabled for $_[1]},
353 wcy1 => q{$_[0] is missing or out of range},
354 wcy2 => q{Duplicate WCY},
355 wcy3 => q{Date Hour SFI A K Exp.K R SA GMF Aurora Logger},
356 wcys => q{WCY enabled for $_[0]},
357 wcyu => q{WCY disabled for $_[0]},
358 wpc16s => q{Allow PC16 from $_[0] enabled},
359 wpc16u => q{Allow PC16 from $_[0] disabled},
360 wpc19s => q{Route PC19 for $_[0] enabled},
361 wpc19u => q{Route PC19 for $_[0] disabled},
362 wpc9xs => q{PC9X for $_[0] enabled},
363 wpc9xu => q{PC9X for $_[0] disabled},
364 wwv1 => q{$_[0] is missing or out of range},
365 wwv2 => q{Duplicate WWV},
366 wwv3 => q{Date Hour SFI A K Forecast Logger},
367 wwvs => q{WWV enabled for $_[0]},
368 wwvu => q{WWV disabled $_[0]},
369 wxs => q{WX enabled for $_[0]},
370 wxu => q{WX disabled for $_[0]},
373 addr => q{Addres gezet op: $_[0]},
374 already => q{$_[0] reeds geconnect},
375 anns => q{Announce berichten AAN gezet voor $_[0]},
376 annu => q{Announce berichten UIT gezet voor $_[0]},
377 bbse1 => q{Geef je home bbs (mailbox),, set/bbs <home mailbox>},
378 bbs => q{Je home bbs (mailbox) is nu "$_[0]"},
379 beepoff => q{De beep staat nu UIT},
380 beepon => q{De beep staat nu AAN},
381 conother => q{Sorry $_[0] je bent reeds geconnect op een andere poort},
382 concluster => q{Sorry $_[0] je bent reeds op een ander cluster geconnect},
383 conscript => q{Geen connectscript aangeroepen "$_[0]" gevonden in $main::root/connect},
384 confail => q{Verbinding met $_[0] mislukt ($_[1])},
385 constart => q{Verbinding met $_[0] gestart},
386 disc1 => q{Gedisconnect door $_[0]},
387 disc2 => q{$_[0] gedisconnect},
388 dx1 => q{Frequentie $_[0] valt niet binnen een band [Opdracht: DX freq call commentaar](Zie sh/band)},
389 dx2 => q{Ik heb een call nodig! [Opdracht: DX freq call commentaar]},
390 dxs => q{DX Spots worden WEL doorgegeven aan $_[0]},
391 dxu => q{DX Spots worden NIET doorgegeven aan $_[0]},
392 e1 => q{Ongeldige opdracht},
393 e2 => q{Fout: $_[0]},
394 e3 => q{$_[0]: $_[1] niet gevonden},
395 e4 => q{Minimaal een prefix of een call nodig},
396 e5 => q{Niet toegestaan},
397 e6 => q{*** Geen station gespecifiseerd ***},
398 e7 => q{Callsign $_[0] is niet zichtbaar op het cluster},
399 e8 => q{Ik heb een call en tekst nodig},
400 e9 => q{Ik heb wel tekst nodig voor een announce!},
401 e10 => q{$_[0] is niet lokaal verbonden},
402 e12 => q{Ik heb een node call nodig},
403 e13 => q{$_[0] is geen node},
404 emaile1 => q{Geef uw E-mail addres, set/email <uw e-mail addres>},
405 emaila => q{Uw E-Mail addres is nu "$_[0]"},
406 email => q{E-mail addres gezet op: $_[0]},
407 helpe1 => q{Help systeem niet beschikbaar, meld dit aan de sysop},
408 helpe2 => q{Geen help beschikbaar over "$_[0]"},
409 heres => q{Aanwezigheid AAN gezet voor $_[0]},
410 heade1 => q{Gebruik gemaakt van de $main::mycall coordinaten, overweeg een set/location of set/qra},
411 hereu => q{Aanwezigheid UIT gezet voor $_[0]},
412 homebbs => q{Uw Home mailbox is nu $_[0]},
413 homenode => q{Uw (Home) DX-Cluster is : $_[0]},
414 hnodee1 => q{Geef mij uw lokale (home) DX-cluster, set/homenode <DX-cluster>},
415 hnode => q{Uw (home) DX-cluster is nu "$_[0]"},
416 iso => q{$_[0] is geisoleerd (Isolated)},
417 isou => q{$_[0] is niet meer geisoleerd (UnIsolated)},
418 isoc => q{$_[0] gecreerd en geisoleerd (Isolated)},
419 l1 => q{Sorry $_[0], u bent reeds op een ander kanaal ingelogt},
420 l2 => q{Hallo $_[0], dit is $main::mycall in $main::myqth met DXSpider V$main::version},
421 lang => q{De taal zijn nu Nederlandse},
422 lh1 => q{$main::data/hop_table.pl bestaat niet},
423 loce1 => q{Geef uw coordinaten met, set/location <latitude longitude>},
424 loce2 => q{Herken "$_[0]" niet als Lat/Long (vb 52 20 N 0 16 E)},
425 loc => q{Uw Latitude en Longitude zijn nu "$_[0]"},
426 lockout => q{$_[0] heeft geen toegang meer (Locked out)},
427 lockoutun => q{$_[0] heeft wederom toegang (Unlocked)},
428 m2 => q{$_[0] Informatie: $_[1]},
429 merge1 => q{Merge verzoek voor $_[1] spots en $_[2] WWV verzonden naar $_[0]},
430 msgnew => q{Er is nieuwe post gearriveerd voor u},
431 namee1 => q{Geef aub uw naam met, set/name <uw naam>},
432 namee2 => q{Gebruiker $_[0] niet te vinden!},
433 name => q{Uw naam is gezet op "$_[0]"},
434 node => q{$_[0] gezet als een AK1A stijl DX-cluster},
435 nodeu => q{$_[0] teruggezet naar gebruiker status},
436 nodec => q{$_[0] gecreeerd als AK1A stijl DX-cluster},
437 nodee1 => q{U kunt deze opdracht niet uitvoeren zolang ($_[0]) on-line is},
438 ok => q{Opdracht succesvol uitgevoerd},
439 page => q{Druk op Enter om door te gaan, A om af te breken (nog $_[0] regels) >},
440 pagelth => q{Paginalengte gezet op ($_[0]) regels},
441 passerr => q{Gebruik: SET/PASS <wachtwoord> <call>},
442 password => q{Wachtwoord gezet of gewijzigd voor $_[0]},
443 pingo => q{Ping gestart naar $_[0]},
444 pingi => q{Ping ontvangen van $_[0] $_[1] (Ave $_[2]) secs},
445 priv => q{Privilege level gewijzigd op $_[0]},
446 prx => q{$main::mycall >},
447 qll => q{Geef uw locator met set/location of set/qra},
448 qthe1 => q{Geef uw woonplaats met, set/qth <woonplaats>},
449 qth => q{Uw QTH is nu "$_[0]"},
450 qrae1 => q{Geef uw QRA locator, set/qra <qra locator> (vb set/qra JO33FD)},
451 qrashe1 => q{Geef uw QRA locator, vbg sh/qra JO33FD of sh/qra JO33FD IO93NS},
452 qrae2 => q{Ik herken "$_[0]" niet als een QRA locator (vb JO33FD)},
453 qra => q{Uw QRA Locator is nu "$_[0]"},
454 rcmdo => q{RCMD "$_[0]" verzonden naar $_[1]},
455 read1 => q{Sorry, geen berichten voor u},
456 read2 => q{Bericht $_[0] niet gevonden},
457 read3 => q{Bericht $_[0] niet beschikbaar},
458 shutting => q{$main::mycall gaat QRT...},
459 sloc => q{Cluster lat $_[0] long $_[1], DON'T FORGET TO CHANGE YOUR DXVars.pm},
460 sqra => q{Cluster QRA Locator$_[0], DON'T FORGET TO CHANGE YOUR DXVars.pm},
461 talks => q{Talk berichten AAN gezet voor $_[0]},
462 talku => q{Talk berichten UIT gezet voor $_[0]},
463 usernf => q{*** Gebruiker info van $_[0] niet gevonden ***},
464 wwvs => q{WWV berichten AAN gezet voor $_[0]},
465 wwvu => q{WWV berichten UIT gezet voor $_[0]},
466 wxs => q{WX berichten AAN gezet voor $_[0]},
467 wxu => q{WX berichten UIT gezet voor $_[0]},
470 addr => q{Adresse fixée à : $_[0]},
471 already => q{$_[0] déjà connecté},
472 anns => q{Annonces activées pour $_[0]},
473 annu => q{Annonces désactivées pour $_[0]},
474 annts => q{AnnTalk activé pour $_[0]},
475 anntu => q{AnnTalk désactivé pour $_[0]},
476 at => q{connecté en ce moment sur},
477 badnode1 => q{Le serveur $_[0] est maintenant en rejet},
478 badnode2 => q{Le serveur $_[0] n'est maintenant plus en rejet},
479 badnode3 => q{Liste des serveurs en rejet :-},
480 bbse1 => q{Veuillez entrer l'adresse de votre BBS avec : set/bbs <votre_BBS>},
481 bbs => q{Votre BBS est définie comme étant "$_[0]"},
482 beepoff => q{Bips désactivés},
483 beepon => q{Bips activés},
484 call1 => q{Recherche de l'indicatif via $_[0]:},
485 conother => q{Désolé $_[0], vous êtes déjà connecté sur un autre port},
486 concluster => q{Désolé $_[0], vous êtes déjà connecté ailleurs au cluster (sur $_[1])},
487 conscript => q{Pas de script de connexion "$_[0]" dans $main::root/connect !},
488 confail => q{Echec de la connexion avec $_[0] ($_[1])},
489 constart => q{Etablissement de la connexion avec $_[0]},
490 deluser => q{L'utilisateur $_[0] a été supprimé},
491 db1 => q{Cette base de données est hébergée sur $_[0]},
492 db2 => q{Désolé, mais la clé: $_[0] est introuvable dans $_[1]},
493 db3 => q{Désolé, la base de données $_[0] n'existe pas ici},
494 db4 => q{Désolé, la base de données $_[0] sur $_[1] n'est pas en ligne actuellement},
495 db5 => q{Accès à la base de données distante sur $_[0] en cours...veuillez patienter !},
496 db6 => q{La base de données $_[0] existe déjà; vous devez d'abord la supprimer},
497 db7 => q{Base de données $_[0] créée pour le serveur distant $_[1]},
498 db8 => q{Base de données $_[0] créée en local},
499 db9 => q{Base de données $_[0] supprimée},
500 db10 => q{$_[0] enregistrements importés dans $_[1]},
501 db11 => q{Envoi de votre requête à $_[0], veuillez patienter...},
502 db12 => q{Base de données Serveur Commande Chaînage},
503 dfreq1 => q{Fréquence $_[0] non valable. Il faut par exemple: 0/30000 ou hf ou hf/cw'},
504 dir1 => q{Aucun message trouvé !},
505 disc1 => q{Déconnecté par $_[0]},
506 disc2 => q{Canal $_[0] déconnecté},
507 disc3 => q{Pas de canal, mais connexion $_[0] terminée},
508 disc4 => q{Pas de canal ni de connexion mais "orphelin" $_[0] déconnecté},
510 dup => q{Désolé, ceci est un doublon.},
511 dx1 => q{La fréquence $_[0] est hors bande (voir show/band); syntaxe: DX [BY indicatif] fréquence indicatif remarques},
512 dx2 => q{L'indicatif manque; syntaxe : DX [BY indicatif] fréquence indicatif remarques},
513 dx3 => q{Indicatif ou fréquence non valable.},
514 dxcqs => q{Zones DX CQ activées pour $_[0]},
515 dxcqu => q{Zones DX CQ désactivées pour $_[0]},
516 dxitus => q{Zones DX UIT activées pour $_[0]},
517 dxituu => q{Zones DX UIT désactivées pour $_[0]},
518 dxs => q{Infos DX activées pour $_[0]},
519 dxu => q{Infos DX désactivées pour $_[0]},
520 e1 => q{Commande inconnue},
521 e2 => q{Erreur: $_[0]},
522 e3 => q{$_[0]: $_[1] non trouvé},
523 e4 => q{Il faut au moins un préfixe ou un indicatif},
524 e5 => q{Non autorisé.},
525 e6 => q{*** Aucune station spécifiée ***},
526 e7 => q{$_[0] n'est pas atteignable sur le cluster},
527 e8 => q{Il faut un indicatif et du texte.},
528 e9 => q{Il faut un texte.},
529 e10 => q{$_[0] n'est pas connecté localement},
530 e11 => q{Le destinataire ne peut pas être $main:mycall},
531 e12 => q{Il faut spécifier un indicatif de serveur !},
532 e13 => q{$_[0] n'est pas un serveur},
533 e14 => q{Le premier argument doit être une valeur numérique > 0},
534 e15 => q{Paramètre incorrect : "$_[0]"},
535 e16 => q{Le fichier "$_[0]" existe déjà},
536 e17 => q{Prière de ne pas utiliser les mots : @_ ici !'},
537 e18 => q{Connexion impossible avec $_[0] ($!)},
538 e19 => q{Caractère non valide dans la ligne $_[0]},
539 e20 => q{Symbole $_[0] non reconnu},
540 e21 => q{$_[0] n'est pas une valeur numérique},
541 e22 => q{$_[0] n'est pas un indicatif},
542 e23 => q{$_[0] n'est pas un intervalle (exemple: 0/30000)'},
543 e24 => q{Désolé, l'accès à Internet n'est pas actif},
544 e25 => q{Désolé, la valeur doit être entre $_[0] et $_[1]},
545 e26 => q{Trop d'erreurs simultanées; vous allez être déconnecté !},
546 e27 => q{$_[0] n'est un préfixe ni sa valeur numérique.'},
547 e28 => q{Désolé, vous devez d'abord vous enregistrer (SP $main::myalias pour ce faire)},
548 e29 => q{Il faut un mot de passe !},
549 e30 => q{Impossible d'ouvrir $_[0] $!},
550 e31 => q{$_[0] n'est pas un utilisateur'},
551 e32 => q{Il faut une phrase secrète !},
552 e33 => q{$_[0] n'est pas un nombre de jours ou une date valable},
553 e34 => q{Il faut un GROUPE puis du texte},
554 e35 => q{Vous n'êtes pas un membre de $_[0], rejoignez $_[0]},
556 echoon => q{Echo activé},
557 echooff => q{Echo désactivé},
558 echow => q{L'écho est actuellement désactivé (set/echo pour l'activer)},
559 emaile1 => q{Veuillez entrer votre adresse e-mail avec : set/email <votre_adresse_e-mail>},
560 emaila => q{Votre adresse e-mail est enregistrée comme étant "$_[0]"},
561 email => q{Adresse e-mail définie comme étant $_[0]},
562 export1 => q{Syntaxe: export <numéro_de_msg> <nom_de_fichier>},
563 export2 => q{$_[3] rencontre une erreur à l'exportation du message $_[0] vers $_[1] ($_[2])},
564 export3 => q{$_[2 ] a exporté le message $_[0] vers $_[1]},
565 filter1 => q{Filtre $_[0] mis à jour dans $_[1]},
566 filter2 => q{Mot clé de filtrage inconnu : $_[0]},
567 filter3 => q{Pas de filtres définis pour $_[0]},
568 filter4 => q{$_[0]$_[1] Filtre $_[2] supprimé pour $_[3]},
569 filter5 => q{Il faut une commande de filtrage...},
570 filter6 => q{$_[0]$_[1] Filtre pour $[2] introuvable},
571 grids => q{Fonction DX Grid activée pour $_[0]},
572 gridu => q{Fonction DX Grid désactivée pour $_[0]},
573 illcall => q{Désolé, $_[0] n'est pas un indicatif valable},
574 hasha => q{$_[0] existe déjà dans $_[1]},
575 hashb => q{$_[0] ajouté à $_[1]},
576 hashc => q{$_[0] retiré de $_[1]},
577 hashd => q{$_[0] n'est pas dans $_[1]'},
578 hashe => q{$_[0] ajouté le $_[1]'},
579 heading => q{Azimut},
580 helpe1 => q{Système d'aide non disponible, prière de prévenir le sysop},
581 helpe2 => q{Pas d'aide disponible sur $_[0]},
582 heres => q{$_[0] est présent},
583 heade1 => q{Calcul avec les coordonnées de $main::mycall; pensez à faire un set/location ou set/qra !},
584 hereu => q{$_[0] est absent},
585 homebbs => q{BBS usuelle définie comme étant $_[0]},
586 homenode => q{Serveur cluster usuel défini comme étant $_[0]},
587 homenode2 => q{Utilise},
588 hnodee1 => q{Veuillez entrer votre serveur cluster usuel (set/homenode <votre_serveur>)},
589 hnodee2 => q{Impossible de définir votre serveur usuel comme étant $_[0]},
590 hnode => q{Votre serveur cluster usuel est défini comme étant "$_[0]"},
591 init1 => q{Message d'initialisation envoyé à $_[0]},
592 iso => q{$_[0] isolé},
593 isou => q{$_[0] n'est plus isolé},
594 isoc => q{$_[0] créé et isolé},
595 isoari => q{Il existe un filtre de route entrante pour $_[0]; utilisez d'abord clear/route $_[0]},
596 isoaro => q{Il existe un filtre de route sortante pour $_[0]; utilisez d'abord clear/route $_[0]},
597 isow => q{$_[0] est isolé; utilisez d'abord unset/isolate $_[0]},
598 join => q{Affiliation au groupe $_[0]},
599 l1 => q{Désolé $_[0], vous êtes déjà connecté sur un autre canal},
600 l2 => q{Bonjour $_[0], bienvenue sur $main::mycall à $main::myqth\nServeur DXSpider V$main::version ($main::build)},
601 lang => q{Je parle maintenant français},
602 lange1 => q{Syntaxe : set/language <langue>, où <langue> est à choisir parmi ($_[0])},
603 lange2 => q{Impossible de fixer la langue à $_[0]'},
604 lastconn => q{Dernière conn},
605 leave => q{Départ du groupe $_[0]},
606 lh1 => q{$main::data/hop_table.pl n'existe pas},
608 loce1 => q{Veuillez entrer vos coordonnées avec : set/location <latitude longitude>},
609 loce2 => q{"$_[0]" n'est visiblement pas une latitude/longitude (ex: 46 20 N 6 12 E)},
610 loce3 => q{$_[0] est un QTH locator, veuillez utiliser : set/qra $_[0]},
611 loc => q{Votre latitude/longitude est enregistrée comme étant "$_[0]"},
612 location => q{Coordonnées},
613 lockout => q{$_[0] exclus},
614 lockoutc => q{$_[0] créé et exclus},
615 lockoutun => q{$_[0] n'est plus exclus},
616 lockoutuse => q{Syntaxe : sh/lockout <indicatif>|ALL},
617 loginu => q{L'utilisateur $_[0] s'est connecté},
618 logoutu => q{L'utilisateur $_[0] s'est déconnecté},
619 loginn => q{Le serveur $_[0] s'est connecté},
620 logoutn => q{Le serveur $_[0] s'est déconnecté},
621 m1 => q{Veuillez entrer le sujet (max. 30 caractères):},
622 m2 => q{Copie du message $_[0] envoyée à $_[1]},
623 m3 => q{Désolé, $_[0] n'est pas une adresse de destination acceptable},
624 m4 => q{Désolé, impossible d'accéder au message $_[0]},
625 m5 => q{Il faut spécifier un numéro de message !'},
626 m6 => q{Réponse à : $_[0]},
627 m7 => q{Sujet : $_[0]},
628 m8 => q{Entrez maintenant le texte (fin avec <Ctrl-Z> ou /EX, abandon avec /ABORT)},
629 m9 => q{Vous avez du nouveau courrier (tapez R pour le lire)},
630 m10 => q{Entrée du message abandonnée},
631 m11 => q{Message numéro $_[0] enregistré et transmis à $_[1]},
632 m12 => q{Message numéro $_[0] supprimé},
633 m13 => q{Message numéro $_[0] introuvable},
634 m14 => q{Message numéro $_[0] marqué comme envoyé à $_[1]},
635 m15 => q{Message numéro $_[0] marqué comme non envoyé à $_[1]},
636 m16 => q{Il faut un numéro de message !},
637 m17 => q{Désolé, impossible d'envoyer des messages en mode $_[0]},
638 m18 => q{Désolé, le message $_[0] possède actuellement le statut KEEP},
639 msg1 => q{Bulletins mis en file d'attente},
640 msg2 => q{Messages personnels mis en file d'attente},
641 msg3 => q{Message $_[0]: $_[1] changé de $_[2] en $_[3]},
642 msgu => q{Syntaxe: msg <commande> <numéro_de_message> données...},
643 merge1 => q{Demande de fusionnement de $_[1] infos DX et $_[2] WWV envoyée à $_[0]},
644 moon => q{Emplacement jj/mm/aaaa Lever Coucher},
645 moon_with_azel => q{Emplacement jj/mm/aaaa Lever Coucher Azim Elev},
646 mond => q{Monitoring désactivé},
647 mone => q{Monitoring activé},
649 namee1 => q{Veuillez entrer votre nom avec : set/name <votre_nom>},
650 namee2 => q{Utilisateur $_[0] introuvable.},
651 name => q{Votre nom est enregistré comme étant "$_[0]"},
652 nodea => q{$_[0] défini comme serveur de type AK1A},
653 nodeac => q{$_[0] créé comme serveur de type AK1A},
654 nodeb => q{$_[0] défini comme BBS},
655 nodebc => q{$_[0] créé comme BBS},
656 nodec => q{$_[0] défini comme serveur de type CLX},
657 nodecc => q{$_[0] créé comme serveur de type CLX},
658 noder => q{$_[0] défini comme serveur de type AR-Cluster},
659 noderc => q{$_[0] créé comme serveur de type AR-Cluster},
660 nodes => q{$_[0] défini comme serveur de type DXSpider},
661 nodesc => q{$_[0] créé comme serveur de type DXSpider},
662 nodex => q{$_[0] défini comme serveur de type DXNET},
663 nodexc => q{$_[0] créé comme serveur de type DXNET},
664 nodeu => q{$_[0] défini comme utilisateur},
665 nodee1 => q{Vous ne pouvez pas utiliser cette commande pendant que sa cible ($_[0]) est en ligne},
666 notdone => q{PAS fait},
667 nothere => q{désolé, $_[0] n'est pas là en ce moment...'},
668 obscount => q{Compteur d'obsolescence des pings vers $_[0] mis à $_[1]},
669 ok => q{Opération réussie},
670 outconn => q{Connexion en cours avec $_[0]},
671 page => q{<Enter> pour continuer ou <A> pour arrêter (il reste $_[0] lignes) >},
672 pagelth => q{Longueur de page fixée à $_[0]},
673 passerr => q{Veuillez utiliser: SET/PASS <mot_de_passe> <indicatif>},
674 passphrase => q{Phrase secrète définie ou modifiée pour $_[0]},
675 passphraseu => q{Phrase secrète supprimée pour $_[0]},
676 password => q{Mot de passe défini ou modifié pour $_[0]},
677 passwordu => q{Mot de passe supprimé pour $_[0]},
678 pc90s => q{PC90 activé pour $_[0]},
679 pc90u => q{PC90 désactivé pour $_[0]},
680 pingo => q{Ping envoyé vers $_[0]},
681 pingi => q{Ping retourné par $_[0] en $_[1] (moyenne $_[2]) secondes},
682 pinge1 => q{Vous ne pouvez pas vous pinger vous-même !},
683 pingint => q{Intervalle de ping vers $_[0] fixé à $_[1] secondes},
684 'pos' => q{Indicatif source : latitude $_[0] : longitude $_[1] : $_[2]},
685 prs => q{Prompt défini comme étant "$_[0]"},
686 pru => q{Prompt remis à sa valeur par défaut},
687 priv => q{Niveau de privilège changé en $_[0]},
688 prx => q{$main::mycall >},
689 pw0 => q{Entrez l'ancien mot de passe : },
690 pw1 => q{Entrez le nouveau mot de passe : },
691 pw2 => q{Confirmez le nouveau mot de passe : },
692 pw3 => q{Mot de passe modifié},
693 pw4 => q{Les mots de passe sont différents, changement PAS effectué},
694 qll => q{Veuillez entrer votre emplacement avec set/location ou set/qra},
695 qthe1 => q{Veuillez entrer votre QTH, set/qth <votre_qth>},
696 qth => q{Votre QTH est enregistré comme étant "$_[0]"},
697 qrae1 => q{Veuillez entrer votre QRA locator, set/qra <qra_locator> (exemple : set/qra JN36BE)},
698 qrashe1 => q{Veuillez entrer un QRA locator, par exemple: sh/qra JN36BE or sh/qra JN36BE JO31NS},
699 qrae2 => q{"$_[0]" n'est pas un QRA locator (exemple: JN36BE)},
700 qra => q{Votre QRA Locator est enregistré comme étant "$_[0]"},
701 qsl1 => q{Indicatif Manager Fois Dernière annonce Par},
702 rcmdo => q{RCMD "$_[0]" envoyé à $_[1]},
703 read1 => q{Désolé, pas de nouveaux messages pour vous.},
704 read2 => q{Message $_[0] introuvable},
705 read3 => q{Message $_[0] non disponible},
706 rec => q{$_[0] enregistrements},
707 reg => q{$_[0] enregistré},
708 regc => q{$_[0] créé et enregistré},
709 reginac => q{Le mode Enregistré n'est pas actif (set/var \$main::reqreg = 1 pour l'activer)},
710 regun => q{Enregistrement de $_[0] supprimé},
711 route => q{$_[0] sur $_[1] via $_[2]},
712 sat1 => q{Table de poursuite pour $_[0] pour les prochaines $_[1] heures toutes les $_[2] minutes},
713 sat2 => q{jj/mm UTC Lat Lon Alt Km Az El Dist Km},
714 sat3 => q{Syntaxe: SH/SAT <nom> [<heures> <intervalle>]},
715 sat4 => q{Satellites disponibles/Age des éléments orbitaux (jours):-},
716 sat5 => q{nnnnn.AMSAT doit figurer dans le sujet pour que des éléments orbitaux puissent être chargés à partir de ce message},
717 satnf => q{Satellite $_[0] inconnu},
719 set => q{$_[0] activé pour $_[1]},
720 sethop1 => q{Syntaxe: set/hops <indicatif> ann|spots|route|wwv|wcy <nombre_de_hops>},
721 sethop2 => q{$_[0] hops définis pour $_[1]$_[2] vers $_[3]'},
722 sethop3 => q{Pas de nombre de hops défini vers $_[0]'},
723 showconf => q{Serveur Utilisateurs},
724 shu => q{"SHU" ne suffit pas. Vous devez taper au moins "SHUT" pour arrêter le serveur !},
725 shutting => q{$main::mycall en cours d'arrêt...},
726 sloc => q{Latitude du serveur $_[0], longitude $_[1]. N'OUBLIEZ PAS D'ADAPTER VOTRE DXVars.pm},
727 snode1 => q{Serveur Type Version},
728 snode2 => q{$_[0] $_[1] $_[2]},
729 snode3 => q{$_[0] Indicatif inconnu},
730 sqra => q{QRA Locator du serveur: $_[0]. N'OUBLIEZ PAS D'ADAPTER VOTRE DXVars.pm},
731 sorry => q{Désolé !},
732 spf1 => q{spoof: création du nouvel utilisateur $_[0]},
733 stathf => q{Statistiques des infos DX en ondes courtes, 31 derniers jours :},
734 stathft => q{Statistiques des infos DX en ondes courtes, 31 derniers jours pour le DXCC $_[0] :},
735 statvhf => q{Statistiques des infos DX en VHF et au-delà, 31 derniers jours :},
736 statvhft => q{Statistiques des infos DX en VHF et au-delà, 31 jours derniers pour le DXCC $_[0] :},
737 statdx => q{Total des infos DX des 31 derniers jours},
738 sun => q{Emplacement jj/mm/aaaa Lever Coucher},
739 sun_with_azel => q{Emplacement jj/mm/aaaa Lever Coucher Azim Elev},
740 susdb1 => q{Syntaxe : indicatif état ville},
741 susdb2 => q{USDB $_[0] était $_[1], $_[2]},
742 susdb3 => q{USDB $_[0] est maintenant $_[1], $_[2]},
743 susdb4 => q{USDB $_[0] supprimé},
744 suser1 => q{Syntaxe : indicatif nom_de_champ_utilisateur valeur},
745 suser2 => q{Utilisateur $_[0] non trouvé},
746 suser3 => q{Champ utilisateur '$_[0]' modifié de '$_[1]' à '$_[2]'},
747 suser4 => q{Le nom de champ utilisateur '$_[0]' n'existe pas},
748 time1 => q{Heure locale: $_[0] $_[1] ($_[2])},
749 time2 => q{$_[0] Heure locale (normale): $_[1] (UTC $_[2])},
750 time3 => q{$_[0] $_[1]},
751 talks => q{Talk activé pour $_[0]},
752 talku => q{Talk désactivé pour $_[0]},
753 talkend => q{conversation terminée avec vous},
754 talkinst => q{Passage en mode conversation (/EX = terminer, /<cmd> = exécuter une commande)},
755 talknh => q{désolé, $_[0] n'est pas connecté en ce moment},
756 talkprompt => q{Talk ($_[0])>},
757 talkstart => q{début de conversation avec vous},
758 unset => q{$_[0] désactivé pour $_[1]},
759 unsethop1 => q{Syntaxe: unset/hops <indicatif> ann|spots|route|wwv|wcy},
760 unsethop2 => q{Nombre de hops supprimé vers $_[1] pour $_[0]'},
761 user => q{Utilisateur},
762 userconn => q{Utilisateurs connectés sur},
763 usernf => q{*** Pas d'enregistrement utilisateur trouvé pour $_[0] ***},
764 usstates => q{Affichage des états US activé pour $_[0]},
765 usstateu => q{Affichage des états US désactivé pour $_[0]},
766 wcy1 => q{$_[0] manque ou est une valeur hors limites},
767 wcy2 => q{Annonce WCY double},
768 wcy3 => q{ Date Heure SFI A K Kprévu R SA GMF Aurora Source},
769 wcys => q{WCY activé pour $_[0]},
770 wcyu => q{WCY désactivé pour $_[0]},
771 wpc16s => q{PC16 provenant de $_[0] autorisés},
772 wpc16u => q{PC16 provenant de $_[0] refusés},
773 wpc19s => q{Routage des PC19 pour $_[0] activé},
774 wpc19u => q{Routage des PC19 pour $_[0] désactivé},
775 wwv1 => q{$_[0] manque ou est une valeur hors limites},
776 wwv2 => q{Annonce WWV double},
777 wwv3 => q{ Date Heure SFI A K Prévision Source},
778 wwvs => q{WWV activé pour $_[0]},
779 wwvu => q{WWV désactivé pour $_[0]},
780 wxs => q{WX activé pour $_[0]},
781 wxu => q{WX désactivé pour $_[0]},
784 addr => q{La dirección es ahora: $_[0]},
785 already => q{$_[0] ya está conectado},
786 anns => q{Activada la recepción de anuncios para $_[0]},
787 annu => q{Desactivada la recepción de anuncios para $_[0]},
788 annts => q{Modo AnnTalk activado para $_[0]},
789 anntu => q{Modo AnnTalk desactivado para $_[0]},
791 badnode1 => q{No se aceptan spots con origen en $_[0], se añade a la lista badnode},
792 badnode2 => q{Se aceptan spots del nodo $_[0], sale de la lista badnode},
793 badnode3 => q{Lista de nodos rechazados:},
794 bbse1 => q{Por favor introduce tu BBS, set/bbs <tu bbs>},
795 bbs => q{Tu BBS es ahora "$_[0]"},
796 beepoff => q{Avisos sonoros desactivados},
797 beepon => q{Avisos sonoros activados},
798 believes => q{Creo en el nodo $_[0] via $_[1]},
799 believeu => q{No creo en el nodo $_[0] via $_[1]},
800 buddya => q{$_[0] se añade a tu lista de indicativos amigos},
801 buddyu => q{$_[0] se elimina de tu lista de indicativos amigos},
802 call1 => q{Se encontró el indicativo vía $_[0]:},
803 chatend => q{Finalizado el modo chat en el canal $_[0]},
804 chatinst => q{Entrando en modo Chat en el canal $_[0], /EX para salir, /<cmd> para ejecutar un comando},
805 chatprompt => q{Chat ($_[0])>},
806 chattoomany => q{Operación no permitida, actualmente estas en el canal $_[1], usa /chat $_[0]},
807 conother => q{Lo siento $_[0] ya estás conectado en otro puerto},
808 concluster => q{Lo siento $_[0] ya estás conectado en otro cluster},
809 conscript => q{No hay ningún script que se llame "$_[0]" en $main::root/connect},
810 confail => q{La conexión con $_[0] ha fallado ($_[1])},
811 constart => q{Se inicia la conexión a $_[0]},
812 conbump => q{Reconectado como $_[0] en $_[1], Esta sesión termina y se te desconecta},
813 deluser =>'El usuario $_[0] ha sido borrado de la base de datos',
814 db1 => q{Esta base de datos está en $_[0]},
815 db2 => q{Lo siento, pero no se encontró $_[0] en $_[1]},
816 db3 => q{Lo siento, la base de datos $_[0] no existe aquí},
817 db4 => q{Lo siento, la base de datos $_[0] situada en $_[1] no se encuentra disponible},
818 db5 => q{Accediendo a la base de datos remota $_[0]...espere...},
819 db6 => q{La base de datos $_[0] ya existe, bórrala primero},
820 db7 => q{La base de datos $_[0] creada para el nodo remoto $_[1]},
821 db8 => q{Base de datos $_[0] creada localmente},
822 db9 => q{La base de datos $_[0] ha sido eliminada},
823 db10 => q{$_[0] registros importados para la base de datos $_[1]},
824 db11 => q{Tu petición ha sido enviada a $_[0], por favor espera...},
825 dfreq1 => q{La frecuencia no es válida $_[0] ej: 0/30000 o hf o hf/cw},
826 dir1 => q{No hay mensajes nuevos},
828 disc2 => q{Canal $_[0] desconectado},
829 disc3 => q{No estaba activo el canal, pero la conexión de $_[0] ha sido eliminada},
830 disc4 => q{No existía el canal o la conexión, $_[0] se elimina},
831 done => q{Comando ejecutado con éxito.},
832 dup => q{Lo siento, esto es un duplicado},
833 dx1 => q{Frecuencia $_[0] fuera de banda (ver show/band); usa: DX [BY indicativo] frec indic. comentario},
834 dx2 => q{Necesita indicativo; usa: DX [BY indicativo] frec indic. comentario},
835 dx3 => q{El indicativo o la frecuencia es incorrecta},
836 dxcqs => q{Activada la recepción de Zonas CQ en spots de DX para $_[0]},
837 dxcqu => q{Desactivada la recepción de Zonas CQ en spots de DX para $_[0]},
838 dxitus => q{Activada la recepción de Zonas ITU en spots de DX para $_[0]},
839 dxituu => q{Desactivada la recepción de Zonas ITU en spots de DX para $_[0]},
840 dxs => q{Activada la recepción de spots de DX para $_[0]},
841 dxu => q{Desactivada la recepción de spots de DX para $_[0]},
842 e1 => q{Este comando no es válido},
843 e2 => q{Error: $_[0]},
844 e3 => q{$_[0]: $_[1] no encontrado},
845 e4 => q{Se necesita, por lo menos, un prefijo o indicativo},
846 e5 => q{No estás autorizado},
847 e6 => q{*** No se ha especificado una estación ***},
848 e7 => q{$_[0] no está visible en la red actualmente},
849 e8 => q{Se necesita un indicativo y algún texto},
850 e9 => q{Se necesita al menos algún texto},
851 e10 => q{$_[0] no se encuentra conectado},
852 e11 => q{No puedes usar tu propio $main:mycall como destino},
853 e12 => q{Se necesita el indicativo del nodo},
854 e13 => q{$_[0] no es un nodo},
855 e14 => q{El primer argumento debe de ser numérico y > 0},
856 e15 => q{calificador no válido "$_[0]"},
857 e16 => q{El fichero "$_[0]" ya existe},
858 e17 => q{Por favor no uses la palabra: @_ aquí},
859 e18 => q{No se puede conectar con $_[0] ($!)},
860 e19 => q{Carácter no válido en la línea $_[0]},
861 e20 => q{Símbolo $_[0] no reconocido},
862 e21 => q{$_[0] no es numérico},
863 e22 => q{$_[0] no es un indicativo},
864 e23 => q{$_[0] fuera de rango (ej: 0/30000)},
865 e24 => q{Lo siento, el acceso a internet no está habilitado},
866 e25 => q{Lo siento el valor debe de estar entre $_[0] y $_[1]},
867 e26 => q{Demasiados errores, serás desconectado},
868 e27 => q{$_[0] no es un número o un prefijo},
869 e28 => q{Lo siento, necesitas registrarte (SP $main::myalias para registrarte)', },
870 e29 => q{Necesitas password'},
871 e30 => q{No se puede abrir $_[0] $!},
872 e31 => q{$_[0] no es un usuario'},
873 e32 => q{Se necesita una frase de contraseña},
874 e33 => q{$_[0] No es un número de días o una fecha válida},
875 e34 => q{Se necesita un grupo y algún texto},
876 e35 => q{No eres un miembro del grupo $_[0], usa join $_[0] para entrar en este grupo},
877 e36 => q{Solo puedes hacer esto desde el prompt de usuario},
879 echoon => q{Eco local activado},
880 echooff => q{Eco local desactivado},
881 echow => q{*Eco local desactivado, set/echo para activarlo},
882 emaile1 => q{Por favor introduce tu E-mail, set/email <tu E-mail>},
883 emaila => q{Tu dirección E-mail es ahora "$_[0]"},
884 email => q{La dirección E-mail es ahora: $_[0]},
885 export1 => q{uso: export <número_mensaje> <nombre_fichero>},
886 export2 => q{$_[3] hubo un error exportando mensaje $_[0] a $_[1] ($_[2])},
887 export3 => q{$_[2 ] exportando mensaje $_[0] a $_[1]},
888 filter1 => q{Filtro $_[0] actualizado con el nombre $_[1]},
889 filter2 => q{Es necesario un valor para $_[0]},
890 filter3 => q{No hay filtros definidos para $_[0]},
891 filter4 => q{Filtro número $_[2] del tipo: $_[0]$_[1] borrado para $_[3]},
892 filter5 => q{Se necesitan algunos comandos para el filtro...},
893 filter6 => q{$_[0]$_[1] Filtro para $[2] no encontrado},
894 grids => q{Activada recepción de locators en spot (DX Grid) para $_[0]},
895 gridu => q{Desactivada recepción de locators en spot (DX Grid) para $_[0]},
896 gtks => q{Terminal GTK activado para $_[0]},
897 gtku => q{Terminal GTK desactivado para $_[0]},
898 illcall => q{Lo siento, $_[0] no es un indicativo válido},
899 hasha => q{$_[0] ya existe en $_[1]},
900 hashb => q{$_[0] añadido a $_[1]},
901 hashc => q{$_[0] eliminado de $_[1]},
902 hashd => q{$_[0] no se encuentra en $_[1]},
903 hashe => q{$_[0] activado $_[1]},
905 helpe1 => q{La ayuda no está disponible, comunícaselo al sysop},
906 helpe2 => q{No hay ayuda disponible para $_[0]},
907 heres => q{Se informa a la red: $_[0] está presente},
908 heade1 => q{Usando las coord. de $main::mycall, se recomienda usar set/location o set/qra},
909 hereu => q{Se informa a la red: $_[0] está ausente},
910 homebbs => q{Tu BBS es ahora: $_[0]},
911 homenode => q{Tu cluster habitual es ahora: $_[0]},
912 hnodee1 => q{Por favor introduce tu cluster habitual, set/homenode <Tu DX cluster>},
913 hnodee2 => q{Error al definir homenode en $_[0]},
914 hnode => q{Tu nodo habitual es ahora "$_[0]"},
915 init1 => q{Enviado mensaje de inicialización a $_[0]},
916 iso => q{El cluster $_[0] se pone en modo pasivo (Aislado)},
917 isou => q{El cluster $_[0] se pone en modo activo},
918 isoc => q{$_[0] creado y definido como pasivo (Aislado)},
919 isoari => q{Existe un filtro de rutas "input" para $_[0]; clear/route input $_[0] primero},
920 isoaro => q{Existe un filtro de rutas para $_[0]; clear/route $_[0] primero', },
921 isow => q{$_[0] está en modo aislado; unset/isolate $_[0] primero},
922 join => q{Entras en el grupo $_[0]},
923 l1 => q{Lo siento $_[0], ya estás conectado en otro canal},
924 l2 => q{Hola $_[0], esta es $main::mycall en $main::myqth usando DXSpider V$main::version},
925 lang => q{El idioma seleccionado es el Español},
926 lange1 => q{set/language <idioma> donde <idioma> es uno entre ($_[0])},
927 lange2 => q{Error al seleccionar idioma en $_[0]},
928 lastconn => q{Última conexión},
929 leave => q{Abandonas el grupo $_[0]},
930 lh1 => q{$main::data/hop_table.pl no existe},
932 loce1 => q{Por favor introduce tu posición, set/location <latitud longitud>},
933 loce2 => q{No se reconoce "$_[0]" como una Lat/Long (ej: 52 20 N 0 16E)},
934 loce3 => q{$_[0] es un QRA locator, por favor usa: set/qra $_[0]},
935 loc => q{Tu Lat/Long es ahora "$_[0]"},
936 location => q{Location},
937 lockout => q{$_[0] Excluido del sistema},
938 lockoutc => q{$_[0] Creado y excluido del sistema},
939 lockoutun => q{$_[0] Autorizado para conectar},
940 lockoutuse => q{Uso: sh/lockout <indicativo|prefijo>|ALL},
941 loginb => q{El colega $_[0] ha conectado},
942 loginbn => q{El colega $_[0] ha conectado en $_[1]},
943 logoutb => q{El colega $_[0] se ha desconectado},
944 logoutbn => q{El colega $_[0] se ha desconectado de $_[1]},
945 loginu => q{$_[0] conecta},
946 logoutu => q{$_[0] se desconecta},
947 loginn => q{$_[0] conecta},
948 logoutn => q{$_[0] se desconecta},
949 m1 => q{Introduce el título (máx. 30 caractéres):},
950 m2 => q{Copia del mensaje $_[0] enviada a $_[1]},
951 m3 => q{Lo siento, $_[0] no se aceptan mensajes a ese tópico},
952 m4 => q{Lo siento, no se puede acceder al mensaje $_[0]},
953 m5 => q{Lo siento, se necesita un número de mensaje},
954 m6 => q{Reenviado a: $_[0]},
955 m7 => q{Título : $_[0]},
956 m8 => q{Introduce mensaje. /EX para terminar o /ABORT para interrumpir},
957 m9 => q{Hay correo nuevo para ti. Bórralo una vez leído.},
958 m10 => q{Mensaje interrumpido},
959 m11 => q{Mensaje nr $_[0] guardado y enviado a $_[1]},
960 m12 => q{Mensaje nr $_[0] borrado},
961 m13 => q{Mensaje nr $_[0] no encontrado},
962 m14 => q{Mensaje nr $_[0] marcado para ser enviado a $_[1]},
963 m15 => q{El mensaje nr $_[0] no se enviará a $_[1]},
964 m16 => q{Se necesita un número de mensaje},
965 m17 => q{Lo siento, no puedo enviar el mensaje en $_[0] modo},
966 m18 => q{Lo siento, el mensaje $_[0] está actualmente marcado como KEEP (Guardarlo)},
967 m19 => q{Fichero de inicio de conexión de $_[0] guardado, contiene $_[1] línea(s)},
968 m20 => q{Fichero de inicio de conexión vacio de $_[0] borrado},
969 msg1 => q{Cola de mensajes tipo Boletín},
970 msg2 => q{Cola de mensajes tipo Privados},
971 msg3 => q{Msg $_[0]: $_[1] cambiado de $_[2] a $_[3]},
972 msgu => q{Uso: msg <cmd> <msgno> data...},
973 merge1 => q{Petición de envío de $_[1] spots y $_[2] WWV enviada a $_[0]},
974 moon => q{QTH dd/mm/yyyy Salida Puesta},
975 moon_with_azel => q{QTH dd/mm/yyyy Salida Puesta Azim Elev', },
976 mond => q{Activado modo monitor},
977 mone => q{Desactivado modo monitor},
979 namee1 => q{Por favor, introduce tu nombre con set/name <tu nombre>},
980 namee2 => q{No se encuentra el usuario $_[0]!},
981 name => q{Tu nombre es "$_[0]"},
982 nodea => q{$_[0] definido como nodo AK1A },
983 nodeac => q{$_[0] creado como nodo AK1A },
984 nodeb => q{$_[0] definido como BBS},
985 nodebc => q{$_[0] creado como BBS},
986 nodec => q{$_[0] definido como nodo CLX },
987 nodecc => q{$_[0] creado como nodo CLX },
988 noder => q{$_[0] definido como nodo AR-Cluster },
989 noderc => q{$_[0] creado como nodo AR-Cluster },
990 nodes => q{$_[0] definido como nodo DXSpider },
991 nodesc => q{$_[0] creado como nodo DXSpider },
992 nodex => q{$_[0] definido como nodo DXNET },
993 nodexc => q{$_[0] creado como nodo DXNET },
994 nodeu => q{$_[0] es ahora un usuario},
995 nodee1 => q{No puedes usar este comando mientras $_[0] se encuentre conectado},
996 notdone => q{No se ha podido realizar la operación},
997 nothere => q{Lo siento, pero $_[0] no está aquí ahora, inténtalo mas tarde},
998 obscount => q{El parámetro Ping obsolescence count para $_[0] se ajusta a $_[1]},
999 ok => q{Operación realizada},
1000 outconn => q{Iniciando conexión con $_[0]},
1001 page => q{Teclea Enter para continuar, A para abortar (Quedan $_[0] líneas) >},
1002 pagelth => q{La longitud de las páginas es ahora de $_[0] línea(s)},
1003 passerr => q{Por favor usa: SET/PASS <password> <indicativo>},
1004 passphrase => q{Passphrase definida o cambiada para $_[0]},
1005 passphraseu => q{Passphrase borrada para $_[0]},
1006 password => q{El Password ha sido definido o cambiado para $_[0]},
1007 passwordu => q{Contraseña borrada para $_[0]},
1008 pc90s => q{PC90 activado para $_[0]},
1009 pc90u => q{PC90 desactivado para $_[0]},
1010 pingo => q{Iniciado el ping a $_[0]},
1011 pingi => q{Ping devuelto por $_[0] en $_[1] (Ave $_[2]) segundos},
1012 pinge1 => q{No puedes enviarte un ping a ti mismo!},
1013 pingint => q{Intervalo de ping para $_[0] ajustado a $_[1] segundos},
1014 'pos' => q{Desde el indicativo: $_[0] Lat: $_[1] Long: $_[2]},
1015 prs => q{El Prompt ha sido cambiado},
1016 pru => q{El Prompt vuelve a ser el normal por defecto},
1017 priv => q{Nivel de privilegios modificado para $_[0]},
1018 prx => q{$main::mycall >},
1019 pw0 => q{Escribe el password antiguo: },
1020 pw1 => q{Escribe el nuevo password: },
1021 pw2 => q{Confirma el nuevo password: },
1022 pw3 => q{El Password ha sido cambiado},
1023 pw4 => q{Los passwords no coinciden, NO se han cambiado},
1024 qll => q{Por favor introduce tu locator con set/location o set/qra},
1025 qthe1 => q{Por favor introduce tu QTH, set/qth <tu qth>},
1026 qth => q{Tu QTH es ahora "$_[0]"},
1027 qrae1 => q{Por favor introduce tu QRA locator, set/qra <qra locator> (ej: set/qra JO02LQ)},
1028 qrashe1 => q{Por favor introduce un QRA locator, ej sh/qra JO02LQ o sh/qra JO02LQ IO93NS},
1029 qrae2 => q{No se reconoce "$_[0]" como un QRA locator ( ej JO02LQ)},
1030 qra => q{Tu QRA Locator es ahora "$_[0]"},
1031 qsl1 => q{Indicativo Manager Nº veces Último Spot De},
1032 rcmdo => q{RCMD "$_[0]" enviado a $_[1]},
1033 read1 => q{Lo siento, no hay mensajes nuevos para ti},
1034 read2 => q{Mensaje $_[0] no encontrado},
1035 read3 => q{Mensaje $_[0] no disponible},
1036 rec => q{$_[0] registro(s)},
1037 reg => q{$_[0] registrado},
1038 regc => q{$_[0] creado y registrado},
1039 reginac => q{El registro no está activo (set/var \$main::regreq = 1 para activarlo)},
1040 regun => q{El usuario $_[0] no está registrado},
1041 route => q{$_[0] en $_[1] vía $_[2]},
1042 sat1 => q{Tabla de seguimiento $_[0] para las próximas $_[1] horas cada $_[2] minutos},
1043 sat2 => q{dd/mm UTC Lat Lon Alt Km Az El Dist Km},
1044 sat3 => q{Sintaxis: SH/SAT <nombre> [<horas> <intervalo>]},
1045 sat4 => q{Satélites disponibles:},
1046 sat5 => q{Es necesario el título nnnn.AMSAT para actualizar datos keps. desde un mensaje},
1047 satnf => q{Satélite $_[0] desconocido},
1048 satdisc => q{-----},
1049 set => q{$_[0] habilitado para $_[1]},
1050 sethop1 => q{Uso: set/hops <indicativo> ann|spots|wwv|wcy <nr de hops>},
1051 sethop2 => q{$_[0] hops set on $_[1]$_[2] para $_[3]},
1052 sethop3 => q{No hay hops definidos para $_[0]},
1053 showconf => q{Nodo Indicativos},
1054 shu => q{"SHU" No es suficiente! Es necesario como mínimo escribir "SHUT" para apagar el cluster},
1055 shutting => q{$main::mycall shutting down...},
1056 sloc => q{Cluster lat $_[0] long $_[1], NO OLVIDES CAMBIAR TU DXVars.pm},
1057 snode1 => q{Nodo Call Sort Versión},
1058 snode2 => q{$_[0] $_[1] $_[2]},
1059 snode3 => q{$_[0] Indicativo desconocido},
1060 sqra => q{Cluster QRA Locator$_[0], NO OLVIDES CAMBIAR TU DXVars.pm},
1061 sorry => q{Lo siento},
1062 spf1 => q{spoof: creando nuevo usuario $_[0]},
1063 stathf => q{Estadísticas de spots en HF de los últimos $_[1] días desde el $_[0]},
1064 stathft => q{Estadísticas de spots en HF de los últimos $_[2] días desde el $_[1] para DXCC $_[0]},
1065 statvhf => q{VHF + DX Spot Stats, últimos $_[1] días desde el $_[0]},
1066 statvhft => q{VHF + DX Spot Stats, últimos $_[2] días desde el $_[1] para DXCC $_[0]},
1067 statdx => q{Total de Spots de DX en los últimos $_[1] días desde el $_[0]},
1068 storable => q{Por favor, instale el módulo Storable de CPAN'},
1069 sun => q{QTH dd/mm/yyyy Salida Puesta},
1070 sun_with_azel => q{QTH dd/mm/yyyy Salida Puesta Azim Elev},
1071 susdb1 => q{Uso: indicativo estado ciudad},
1072 susdb2 => q{USDB $_[0] era $_[1], $_[2]},
1073 susdb3 => q{USDB $_[0] es ahora $_[1], $_[2]},
1074 susdb4 => q{USDB $_[0] borrado},
1075 suser1 => q{Uso: indicativo user_field_name valor},
1076 suser2 => q{Usuario $_[0] no encontrado},
1077 suser3 => q{User field '$_[0]' era '$_[1]' ahora es '$_[2]'},
1078 suser4 => q{User field name '$_[0]' no existe},
1079 time1 => q{Horario local: $_[0] $_[1], UTC $_[2]},
1080 time2 => q{$_[0] Local (standard) time: $_[1] ($_[2] Horas)},
1081 time3 => q{$_[0] $_[1]},
1082 talks => q{Recepción de mensajes Talk activado para $_[0]},
1083 talku => q{Recepción de mensajes Talk desactivado para $_[0]},
1084 talkend => q{Finalizado modo talk contigo},
1085 talkinst => q{Entrando en modo talk, /EX para salir, /<cmd> para ejecutar un comando},
1086 talknh => q{Lo siento $_[0] no está conectado en este momento},
1087 talkprompt => q{Talk ($_[0])>},
1088 talkstart => q{Iniciando modo talk contigo},
1089 unset => q{$_[0] desactivado para $_[1]},
1090 unsethop1 => q{Uso: unset/hops <indicativo> ann|spots|wwv|wcy},
1091 unsethop2 => q{Borrados los hops para $_[1] en $_[0]'},
1093 userconn => q{Indicativos conectados a},
1094 usernf => q{*** No se encuentra el registro de usuario de $_[0] ***},
1095 usstates => q{Activada vista del estado USA en spots para $_[0]},
1096 usstateu => q{Desactivada vista del estado USA en spots para $_[0]},
1097 usernf => q{*** Registro de usuario $_[0] no encontrado ***},
1098 wcy1 => q{$_[0] falta o está fuera de rango},
1099 wcy2 => q{WCY Duplicado},
1100 wcy3 => q{Fecha Hora SFI A K Exp.K R SA GMF Aurora Logger},
1101 wcys => q{Activada recepción de anuncios WCY para $_[0]},
1102 wcyu => q{Desactivada recepción de anuncios WWV para $_[0]},
1103 wpc16s => q{Admitir PC16 de $_[0] activado},
1104 wpc16u => q{Admitir PC16 de $_[0] desactivado},
1105 wpc19s => q{Activada ruta PC19 para $_[0]},
1106 wpc19u => q{Desactivada ruta PC19 para $_[0]},
1107 wpc90s => q{PC90 para $_[0] activado},
1108 wpc90u => q{PC90 para $_[0] descativado},
1109 wwv1 => q{$_[0] falta o está fuera de rango},
1110 wwv2 => q{WWV Duplicado},
1111 wwv3 => q{Fecha Hora SFI A K Previsión Logger},
1112 wwvs => q{Activada recepción de anuncios WWV para $_[0]},
1113 wwvu => q{Desactivada recepción de anuncios WWV para $_[0]},
1114 wxs => q{Activada recepción de anuncios WX para $_[0]},
1115 wxu => q{Desactivada recepción de anuncios WX para $_[0]},
1118 addr => q{Adresse gesetzt auf: $_[0]},
1119 already => q{$_[0] bereits verbunden},
1120 anns => q{Announce flag gesetzt auf $_[0]},
1121 annu => q{Announce flag zurueckgesetzt auf $_[0]},
1122 annts => q{AnnTalk flag gesetzt auf $_[0]},
1123 anntu => q{AnnTalk flag zurueckgesetzt auf $_[0]},
1124 badnode1 => q{$_[0] ist nun ein bad node},
1125 badnode2 => q{$_[0] ist nun ein good node},
1126 badnode3 => q{Liste der Bad Nodes:-},
1127 bbse1 => q{Bitte die BBS Adresse eingeben,, set/bbs <your bbs address>},
1128 bbs => q{Deine BBS Adresse ist nun "$_[0]"},
1129 beepoff => q{Beeps sind nun aus},
1130 beepon => q{Beeps sind jetzt eingeschaltet},
1131 call1 => q{Callsign lookup via $_[0]:},
1132 conother => q{Sorry $_[0] Du bist zu diesem Cluster auf einem anderen Port connected},
1133 concluster => q{Sorry $_[0] Du bist schon anderswo mit einem Cluster verbunden (on $_[1])},
1134 conscript => q{Kein connect script mit Namen "$_[0]" gefunden in $main::root/connect},
1135 confail => q{Verbindungsaufbau zu $_[0] misslungen ($_[1])},
1136 constart => q{Verbindungsaufbau zu $_[0] gestartet},
1137 deluser => q{User $_[0] wurde geloescht},
1138 db1 => q{Diese Datenbank ist untergebracht bei $_[0]},
1139 db2 => q{Sorry, aber Schluesselwort: $_[0] wurde nicht gefunden in $_[1]},
1140 db3 => q{Sorry, Datenbank $_[0] existiert hier nicht},
1141 db4 => q{Sorry, Datenbank $_[0] untergebracht bei $_[1] ist nicht online},
1142 db5 => q{Zugriff auf fremde Datenbank bei $_[0]...standby...},
1143 db6 => q{Datenbank $_[0] existiert bereits, bitte zuerst loeschen},
1144 db7 => q{Datenbank $_[0] angelegt fuer remote Cluster $_[1]},
1145 db8 => q{Datenbank $_[0] lokal angelegt},
1146 db9 => q{Datenbank $_[0] entfernt},
1147 db10 => q{$_[0] Datensaetze importiert in $_[1]},
1148 db11 => q{Sende Deine Anfrage(n)an $_[0], bitte stand by...},
1149 db12 => q{DB Name Location Cmd Chain},
1150 dfreq1 => q{Ungueltige Freq $_[0] brauche: z.B. 0/30000 oder hf oder hf/cw},
1151 dir1 => q{Keine Nachricht gefunden},
1152 disc1 => q{Disconnected von $_[0]},
1153 disc2 => q{Kanal $_[0] disconnected},
1154 disc3 => q{Kein Kanal, aber Verbindung $_[0] disconnected},
1155 disc4 => q{Kein Kanal oder Verbindung, aber Waise $_[0] disconnected},
1157 dup => q{Sorry, dies ist ein Duplikat},
1158 dx1 => q{Frequenz $_[0] nicht im Band (siehe show/band); Gebrauch: DX [BY call] Freq Call Kommentar},
1159 dx2 => q{Brauche ein Rufzeichen; Gebrauch: DX [BY call] Freq Call Kommentar},
1160 dx3 => q{Das Rufzeichen oder Frequenz ist ungueltig},
1161 dxcqs => q{DX CQ Zones aktiviert fuer $_[0]},
1162 dxcqu => q{DX CQ Zones deaktiviert fuer $_[0]},
1163 dxitus => q{DX ITU Zones aktiviert fuer $_[0]},
1164 dxituu => q{DX ITU Zones deaktiviert fuer $_[0]},
1165 dxs => q{DX Spots flag gesetzt auf $_[0]},
1166 dxu => q{DX Spots flag zurueckgesetzt auf $_[0]},
1167 e1 => q{Ungueltiger Befehl},
1168 e2 => q{Fehler: $_[0]},
1169 e3 => q{$_[0]: $_[1] nicht gefunden},
1170 e4 => q{Brauche zumindestens einen Prefix oder ein Rufzeichen},
1171 e5 => q{Nicht erlaubt},
1172 e6 => q{*** Keine Station angegeben ***},
1173 e7 => q{Rufzeichen $_[0] nicht sichtbar im Cluster},
1174 e8 => q{Brauche ein Rufzeichen und etwas Text},
1175 e9 => q{Brauche wenigstens etwas Text},
1176 e10 => q{$_[0] nicht lokal connected},
1177 e11 => q{Kann nicht $main:mein Rufzeichen als Ziel},
1178 e12 => q{Brauche ein Node Rufzeichen},
1179 e13 => q{$_[0] ist kein Node},
1180 e14 => q{Erstes Argument muss eine Zahl und > 0 sein},
1181 e15 => q{Unguelitges Abfragekriterium "$_[0]"},
1182 e16 => q{Datei "$_[0]" existiert},
1183 e17 => q{Bitte gebrauche dieses Wort: @_ nicht hier},
1184 e18 => q{Kann nicht verbinden mit $_[0] ($!)},
1185 e19 => q{Ungueltiger Character in der Zeile $_[0]},
1186 e20 => q{Kuerzel $_[0] nicht erkannt},
1187 e21 => q{$_[0] nicht numerisch},
1188 e22 => q{$_[0] kein Rufzeichen},
1189 e23 => q{$_[0] kein Bereich (z.B. 0/30000)},
1190 e24 => q{Sorry, Internet Zugriff ist nicht freigeschaltet},
1191 e25 => q{Sorry der Wert muss zwischen $_[0] und $_[1] sein},
1192 e26 => q{Zu viele Fehler gleichzeitig, Du wirst disconnected},
1193 e27 => q{$_[0] kein numerisches oder Rufzeichen Prefix},
1194 e28 => q{Sorry, Du musst Dich registrieren (SP $main::myalias to register)},
1195 e29 => q{Brauche eine Passwort},
1196 e30 => q{Kann nicht $_[0] $ oeffnen!},
1197 e31 => q{$_[0] ist kein User'},
1198 e32 => q{Brauche ein Passwort},
1199 e33 => q{$_[0] ist keine Anzahl von Tagen oder ein gueltiges Datum},
1200 e34 => q{Brauche eine GROUP und etwas Text},
1201 e35 => q{Du bist kein Mitglied von $_[0], trete $_[0] bei},
1202 echoon => q{Echo enabled},
1203 echooff => q{Echo disabled},
1204 echow => q{*Echo ist momentan disabled, set/echo zum aktivieren},
1205 emaile1 => q{Bitte E-Mail Addresse eingeben, set/email <Deine e-mail Adresse>},
1206 emaila => q{Deine E-Mail Adresse ist nun "$_[0]"},
1207 email => q{E-mail Adresse gesetzt auf: $_[0]},
1208 export1 => q{Gebrauch: export <msgno> <dateiname>},
1209 export2 => q{$_[3] has error exporting msg $_[0]to $_[1] ($_[2])},
1210 export3 => q{$_[2 ] exportierte msg $_[0] to $_[1]},
1211 filter1 => q{Filter $_[0] upgedated fuer $_[1]},
1212 filter2 => q{Unbekanntes Filter Schluesselwort $_[0]},
1213 filter3 => q{Keine Filter definiert fuer $_[0]},
1214 filter4 => q{$_[0]$_[1] Filter $_[2] geloescht fuer$_[3]},
1215 filter5 => q{brauche ein paar Filter Kommandos...},
1216 filter6 => q{$_[0]$_[1] Filter fuer $[2] nicht gefunden},
1217 grids => q{DX Grid flag gesetzt auf $_[0]},
1218 gridu => q{DX Grid flag zurueckgesetzt auf $_[0]},
1219 illcall => q{Sorry, $_[0] ist ein ungueltiges Rufzeichen},
1220 hasha => q{$_[0] existiert bereits in $_[1]},
1221 hashb => q{$_[0] zugefuegt zu $_[1]},
1222 hashc => q{$_[0] entfernt von $_[1]},
1223 hashd => q{$_[0] nicht in $_[1]},
1224 hashe => q{$_[0] gesetzt auf $_[1]},
1225 helpe1 => q{Hilfe System nicht verfuegbar, bitte Sysop benachrichtigen},
1226 helpe2 => q{Keine Hilfe verfuegbar auf $_[0]},
1227 heres => q{Hier gesetzt auf $_[0]},
1228 heade1 => q{Using $main::mycall Coords, entspricht einem set/location or set/qra},
1229 hereu => q{HERE zurueckgesetzt auf $_[0]},
1230 homebbs => q{Heimat-BBS gesetzt auf: $_[0]},
1231 homenode => q{Heimat-Node gesetzt auf: $_[0]},
1232 hnodee1 => q{Bitte Heimat-Node eingeben, set/homenode <Dein Heimat DX Cluster>},
1233 hnodee2 => q{Heimat-Node setzen ist misslungen $_[0]},
1234 hnode => q{Dein Heimat-Node ist nun "$_[0]"},
1235 init1 => q{Initialisierungs-Nachricht gesendet an $_[0]},
1236 iso => q{$_[0] Isoliert},
1237 isou => q{$_[0] UnIsoliert},
1238 isoc => q{$_[0] erstellt und Isoliert},
1239 isoari => q{Es gibt einen Eingabe Route Filter fuer $_[0]; clear/route input $_[0] zuerst},
1240 isoaro => q{Es gibt einen Ausgabe Route Filter fuer $_[0]; clear/route $_[0] zuerst},
1241 isow => q{$_[0] ist isoliert; unset/isolate $_[0] zuerst},
1242 join => q{Trete Gespraechsgruppe $_[0] bei},
1243 l1 => q{Sorry $_[0], Du bist bereits auf einem anderen Kanal eingeloggt},
1244 l2 => q{Moin $_[0], hier ist $main::mycall in $main::myqth\nrunning DXSpider V$main::version build $main::build},
1245 lang => q{Sprache ist jetzt Deutsch},
1246 lange1 => q{set/language <lang> wobei <lang> ist eine von ($_[0])},
1247 lange2 => q{Fehler beim Setzen der Sprache auf $_[0]},
1248 lh1 => q{$main::data/hop_table.pl existiert nicht},
1249 loce1 => q{Bitte Deinen Standort eingeben, set/location <latitude longitude>},
1250 loce2 => q{Nicht anerkannt "$_[0]" als Lat/Long (z.B. 52 20 N 0 16 E)},
1251 loce3 => q{$_[0] ist ein QRA Locator, Gebrauch: set/qra $_[0]},
1252 loc => q{Dein Lat/Long ist nun "$_[0]"},
1253 lockout => q{$_[0] ausgesperrt},
1254 lockoutc => q{$_[0] erstellt und ausgesperrt},
1255 lockoutun => q{$_[0] Aussperrung aufgehoben},
1256 lockoutuse => q{Gebrauch: sh/lockout <Rufzeichen>|ALL},
1257 loginu => q{User $_[0] hat eingeloggt},
1258 logoutu => q{User $_[0] hat ausgeloggt},
1259 loginn => q{Node $_[0] hat eingeloggt},
1260 logoutn => q{Node $_[0] hat ausgeloggt},
1261 m1 => q{Betreff eingeben (max. 30 Zeichen):},
1262 m2 => q{Kopie der msg $_[0] gesendet an $_[1]},
1263 m3 => q{Sorry, $_[0] ist keine akzeptable TO Adresse},
1264 m4 => q{Sorry, kann nicht zugreifen auf Nachricht $_[0]},
1265 m5 => q{Sorry, ich brauche eine Nachrichten Nummer},
1266 m6 => q{Reply to: $_[0]},
1267 m7 => q{Betreff : $_[0]},
1268 m8 => q{Nachricht eingeben, /EX zum Absenden oder /ABORT zum Abbrechen},
1269 m9 => q{Neue Nachricht(en) fuer Dich},
1270 m10 => q{Nachricht abgebrochen},
1271 m11 => q{Nachricht Nr. $_[0] gesichert und weitergeleitet an $_[1]},
1272 m12 => q{Nachricht Nr. $_[0] geloescht},
1273 m13 => q{Nachricht Nr. $_[0] fehlt},
1274 m14 => q{Nachricht Nr. $_[0] markiert als gesendet an $_[1]},
1275 m15 => q{Nachricht Nr. $_[0] unmarkiert als gesendet an $_[1]},
1276 m16 => q{Brauche eine Nachrichten-Nummer},
1277 m17 => q{Sorry, kann Nachricht nicht senden im $_[0] Mode},
1278 m18 => q{Sorry, Status von Nachricht Nr. $_[0] ist momentan KEEP},
1279 msg1 => q{Bulletin Nachrichten aufgeschoben},
1280 msg2 => q{Private Nachrichten aufgeschoben},
1281 msg3 => q{Msg $_[0]: $_[1] geaendert von $_[2] auf $_[3]},
1282 msgu => q{Gebrauch: msg <cmd> <msgno> data...},
1283 merge1 => q{Merge request fuer $_[1] Spots und $_[2] WWV gesendet an $_[0]},
1284 moon => q{Standort dd/mm/yyyy Rise Set},
1285 moon_with_azel => q{Standort dd/mm/yyyy Rise Set Azim Elev},
1286 mond => q{Ueberwachung Disabled},
1287 mone => q{Ueberwachung Enabled},
1288 namee1 => q{Bitte Deinen Namen eingeben, set/name <Dein Name>},
1289 namee2 => q{Kann User $_[0] nicht finden!},
1290 name => q{Dein Name ist jetzt "$_[0]"},
1291 nodea => q{$_[0] gesetzt als AK1A style Node},
1292 nodeac => q{$_[0] erstellt als AK1A style Node},
1293 nodeb => q{$_[0] gesetzt als BBS},
1294 nodebc => q{$_[0] erstellt als BBS},
1295 nodec => q{$_[0] gesetzt als CLX style Node},
1296 nodecc => q{$_[0] erstellt als CLX style Node},
1297 noder => q{$_[0] gesetzt als AR-Cluster style Node},
1298 noderc => q{$_[0] erstellt als AR-Cluster style Node},
1299 nodes => q{$_[0] gesetzt als DXSpider style Node},
1300 nodesc => q{$_[0] erstellt als DXSpider style Node},
1301 nodex => q{$_[0] gesetzt als DXNET style Node},
1302 nodexc => q{$_[0] erstellt als DXNET style Node},
1303 nodeu => q{$_[0] zurueckgesetzt als ein User},
1304 nodee1 => q{Du kannst dieses Kommando nicht ausfuehren waehrend Dein Ziel ($_[0]) online ist},
1305 notdone => q{Nicht ausgefuehrt},
1306 nothere => q{Sorry, aber $_[0] ist nicht hier im Moment, bitte spaeter noch einmal Versuchen},
1307 obscount => q{Ping obsolescence count on $_[0] set to $_[1]},
1308 ok => q{Operation erfolgreich},
1309 outconn => q{Outstanding connect to $_[0]},
1310 page => q{Druecke Enter zum fortfahren, A zum abbrechen ($_[0] lines) >},
1311 pagelth => q{Seitenlaenge ist nun $_[0]},
1312 passerr => q{Gebrauch: SET/PASS <Passwort> <Rufzeichen>},
1313 password => q{Passwort gesetzt oder geaendert fuer $_[0]},
1314 passwordu => q{Passwort geloescht fuer $_[0]},
1315 pingo => q{Ping gestartet nach $_[0]},
1316 pingi => q{Ping erfolgreich zu $_[0] $_[1] (durchschn. $_[2]) Sekunden},
1317 pinge1 => q{Du kannst Dich nicht selber pingen!},
1318 pingint => q{Ping-Intervall zu $_[0] gesetzt auf $_[1] Sekunden},
1319 'pos' => q{Von Rufzeichen: $_[0] Breite: $_[1] Laenge: $_[2]},
1320 prs => q{Prompt gesetzt auf "$_[0]"},
1321 pru => q{Prompt jetzt zurueckgesetzt auf Default-Einstellung},
1322 priv => q{Priviligierten Level geaendert auf $_[0]},
1323 prx => q{$main::mycall >},
1324 pw0 => q{Altes Passwort eingeben: },
1325 pw1 => q{Neues Passwort eingeben: },
1326 pw2 => q{Wiederhole neues Passwort: },
1327 pw3 => q{Passwort geaendert},
1328 pw4 => q{Passwoerter differieren, Passwort NICHT geaendert},
1329 qll => q{Bitte gib Deinen Standort als geograph. Koordinaten mit set/location oder als Maidenhead-Kenner mit set/qra ein},
1330 qthe1 => q{Bitte gib Dein QTH ein mit set/qth <Dein qth>},
1331 qth => q{Dein QTH ist nun "$_[0]"},
1332 qrae1 => q{Bitte gib Deinen QRA Locator ein mit set/qra <qra locator> (z.B. set/qra JO44RK)},
1333 qrashe1 => q{Bitte einen QRA Locator eingeben, z.B. sh/qra JO02LQ oder sh/qra JO02LQ IO93NS},
1334 qrae2 => q{Erkenne nicht "$_[0]" als einen QRA Locator (z.B. JO02LQ)},
1335 qra => q{Dein QRA Locator ist nun "$_[0]"},
1336 rcmdo => q{RCMD "$_[0]" gesendet an $_[1]},
1337 read1 => q{Sorry, keine neuen Nachrichten fuer Dich},
1338 read2 => q{Msg $_[0] nicht gefunden},
1339 read3 => q{Msg $_[0] nicht verfuegbar},
1340 rec => q{$_[0] records},
1341 reg => q{$_[0] registriert},
1342 regc => q{$_[0] erstellt und registriert},
1343 reginac => q{Registrierung ist nicht aktiv (set/var \$main::reqreg = 1 to activate)},
1344 regun => q{$_[0] unregistriert},
1345 route => q{$_[0] auf $_[1] via $_[2]},
1346 sat1 => q{Tracking Tabelle fuer $_[0] fuer die naechsten $_[1] Stunden alle $_[2] mins},
1347 sat2 => q{dd/mm UTC Lat Lon Alt Km Az El Dist Km},
1348 sat3 => q{Syntax: SH/SAT <name> [<hours> <interval>]},
1349 sat4 => q{Satelliten verfuegbar:-},
1350 sat5 => q{Brauche nnnnn.AMSAT im Betreff um Keplerelemente von dieser Nachricht zu laden},
1351 satnf => q{Satellit $_[0] unbekannt},
1352 satdisc => q{-----},
1353 sethop1 => q{Gebrauch: set/hops <Rufzeichen> ann|spots|wwv|wcy <Anzahl der Hops>},
1354 sethop2 => q{$_[0] hops gesetzt auf $_[1]$_[2] fuer $_[3]},
1355 sethop3 => q{Keine hops gesetzt fuer $_[0]},
1356 shu => q{"SHU" genuegt nicht! Du musst mindestens "SHUT" eingeben, um den Node herunterzufahren},
1357 shutting => q{$main::mycall shutting down...},
1358 sloc => q{Cluster lat $_[0] long $_[1], Nicht vergessen die DXVars.pm zu aendern},
1359 snode1 => q{Node Call Sort Version},
1360 snode2 => q{$_[0] $_[1] $_[2]},
1361 snode3 => q{$_[0] Unbekanntes Rufzeichen},
1362 sqra => q{Cluster QRA Locator$_[0], Nicht vergessen die DXVars.pm zu aendern},
1364 spf1 => q{spoof: erzeuge neuen User $_[0]},
1365 stathf => q{HF DX Spot Stats, letzte 31 Tage},
1366 stathft => q{HF DX Spot Stats, letzte 31 Tage fuer DXCC $_[0]},
1367 statvhf => q{VHF+ DX Spot Stats, letzte 31 Tage},
1368 statvhft => q{VHF+ DX Spot Stats, letzte 31 Tage fuer DXCC $_[0]},
1369 statdx => q{Total DX Spots letzte 31 Tage},
1370 sun => q{Location dd/mm/jjjj Rise Set},
1371 sun_with_azel => q{Location dd/mm/jjjj Rise Set Azim Elev},
1372 suser1 => q{Gebrauch: Rufzeichen user_field_name value},
1373 suser2 => q{User $_[0] nicht gefunden},
1374 suser3 => q{User Feld '$_[0]' war '$_[1]' nun gesetzt auf '$_[2]'},
1375 suser4 => q{User Feld Name '$_[0]' existiert nicht},
1376 time1 => q{Lokala Zeit: $_[0] $_[1], UTC $_[2]},
1377 time2 => q{$_[0] Lokale (standard) Zeit: $_[1] ($_[2] Stunden)},
1378 time3 => q{$_[0] $_[1]},
1379 talks => q{Talk flag gesetzt auf $_[0]},
1380 talku => q{Talk flag zurueckgesetzt auf $_[0]},
1381 talkend => q{Beendet Talk zu Dir},
1382 talkinst => q{Talkmode, /EX zum Beenden, /<cmd> um ein Kommando auszufuehren},
1383 talknh => q{Sorry $_[0] ist im moment nicht online},
1384 talkprompt => q{Talk ($_[0])>},
1385 talkstart => q{Startet Talkmode zu Dir},
1386 unset => q{$_[0] deaktiviert fuer $_[1]},
1387 unsethop1 => q{Gebrauch: unset/hops <call> ann|spots|wwv|wcy},
1389 userconn => q{Rufzeichen verbunden mit},
1390 usernf => q{*** User Satz fuer $_[0] nicht gefunden ***},
1391 wwvs => q{WWV flag gesetzt auf $_[0]},
1392 wwvu => q{WWV flag zurueckgesetzt auf $_[0]},
1393 wxs => q{WX flag gesetzt auf $_[0]},
1394 wxu => q{WX flag zurueckgesetzt auf $_[0]},
1397 addr => q{Indirizzo impostato a: $_[0]},
1398 already => q{$_[0] e' connesso},
1399 anns => q{Annunci attivati alle_[0]},
1400 annu => q{Annunci disattivati alle $_[0]},
1401 annts => q{Talk attivato alle $_[0]},
1402 anntu => q{Talk disattivato alle $_[0]},
1403 badnode1 => q{$_[0] e' un nodo disabilitato},
1404 badnode2 => q{$_[0] e' un nodo attivo},
1405 badnode3 => q{Lista dei nodi disabilitati:-},
1406 bbse1 => q{Per favore inserisci l'indirizzo del tuo BBS con set/bbs <tuo bbs>},
1407 bbs => q{Il tuo BBS e' ora "$_[0]"},
1408 beepoff => q{I beep sono disattivati},
1409 beepon => q{I beep sono attivati},
1410 call1 => q{Ricerca del nominativo via $_[0]:},
1411 conother => q{Spiacente $_[0] sei connesso già su un'altra porta},
1412 concluster => q{Spiacente $_[0] sei connesso già alla rete cluster (su $_[1])},
1413 conscript => q{nessuno script di connessione chiamato "$_[0]" trovato in $main::root/connect},
1414 confail => q{connessione a $_[0] fallita ($_[1])},
1415 constart => q{connessione a $_[0] iniziata},
1416 deluser => q{L'utente $_[0] e' stato eliminato},
1417 db1 => q{Questo database e' presso $_[0]},
1418 db2 => q{Spiacente, ma la chiave: $_[0] non e' stata trovata in $_[1]},
1419 db3 => q{Spiacente, il database $_[0] non esiste qui},
1420 db4 => q{Spiacente, il database $_[0] presso $_[1] non e' disponibile al momento},
1421 db5 => q{Sto accedendo al database remoto presso $_[0]...attendere...},
1422 db6 => q{Il database $_[0] esiste già, cancellalo prima},
1423 db7 => q{Il database $_[0] e' stato creato per il nodo remoto $_[1]},
1424 db8 => q{Il database $_[0] e' stato creato localmente},
1425 db9 => q{Il database $_[0] e' stato eliminato},
1426 db10 => q{$_[0] record importati in $_[1]},
1427 db11 => q{Sto inviando le tue richieste a $_[0], attendi...},
1428 dfreq1 => q{Frequenza non valida $_[0], deve essere del tipo 0/30000 o hf o hf/cw'},
1429 dir1 => q{Nessun messaggio trovato},
1430 disc1 => q{Disconnesso da $_[0]},
1431 disc2 => q{Canalew $_[0] disconnesso},
1432 disc3 => q{Nessun canale, ma la connessione $_[0] disconnessa},
1433 disc4 => q{Nessun canale o connessione ma $_[0] disconnesso},
1435 dup => q{Spiacente, questo e' un doppione},
1436 dx1 => q{Frequenza $_[0] non nella banda (controlla show/band); sintassi: DX [BY nominativo] freq nominativo commento},
1437 dx2 => q{Serve un nominatico; sintassi: DX [BY nominativo] freq nominativo commento},
1438 dx3 => q{Il nominativo o la frequenza sono errati},
1439 dxs => q{DX Spots attivati alle $_[0]},
1440 dxu => q{DX Spots disattivati alle $_[0]},
1441 e1 => q{Comando errato},
1442 e2 => q{Errore: $_[0]},
1443 e3 => q{$_[0]: $_[1] non trovato},
1444 e4 => q{Inserire un prefisso o un nominativo},
1445 e5 => q{Non permesso},
1446 e6 => q{*** Nessuna stazione specificata ***},
1447 e7 => q{il nominativo $_[0] non e' visibile sul cluster},
1448 e8 => q{Inserire un nominativo o del testo},
1449 e9 => q{Inserire del testo},
1450 e10 => q{$_[0] non connesso localmente},
1451 e11 => q{Impossibile usare $main:mycall come destinazione},
1452 e12 => q{Inserire il nominativo di un nodo},
1453 e13 => q{$_[0] non e' un nodo},
1454 e14 => q{Il primo argomento deve essere numerico e > 0},
1455 e15 => q{qualificatore non valido "$_[0]"},
1456 e16 => q{Il file "$_[0]" esiste},
1457 e17 => q{Non usare le parole: @_ qui'},
1458 e18 => q{Impossibile connettere $_[0] ($!)},
1459 e19 => q{Carattere non valido nella linea $_[0]},
1460 e20 => q{separatore $_[0] non riconosciuto},
1461 e21 => q{$_[0] non e' numerico},
1462 e22 => q{$_[0] non e' un nominativo},
1463 e23 => q{$_[0] non e' un intervallo (es 0/30000)'},
1464 e24 => q{Spiacente, l'accesso ad internet non e' abilitato},
1465 e25 => q{Spiacente il valore deve essere tra $_[0] e $_[1]},
1466 e26 => q{Troppi errori, stai per essere disconnesso},
1467 e27 => q{$_[0] non e' un prefisso numeroco o di nominativo'},
1468 e28 => q{Spiacente, devi essere registrato (SP $main::myalias per registrarti)},
1469 e29 => q{E' necessaria una password},
1471 echoon => q{Echo abilitato},
1472 echooff => q{Echo disabilitato},
1473 echow => q{*Echo e' al momento disabilitato, usa set/echo per abilitarlo},
1474 emaile1 => q{Per favore inserisci il tuo indirizzo email con: set/email <indirizzo>},
1475 emaila => q{Il tuo indirizzo email e' ora "$_[0]"},
1476 email => q{Indirizzo email impostato a: $_[0]},
1477 export1 => q{sintassi: export <num_mess> <nome_file>},
1478 export2 => q{$_[3] ha problemi esportando i messaggi da $_[0] a $_[1] ($_[2])},
1479 export3 => q{$_[2 ] messaggi esportati da $_[0] a $_[1]},
1480 filter1 => q{Filtro $_[0] aggiornato per $_[1]},
1481 filter2 => q{Chiave sconosciuta per il filtro $_[0]},
1482 filter3 => q{Nessun filtro definito per $_[0]},
1483 filter4 => q{$_[0]$_[1] Filtro $_[2] cancellato per $_[3]},
1484 filter5 => q{necessito qualche comando per i filtri...},
1485 filter6 => q{$_[0]$_[1] Filtro per $[2] non trovato},
1486 grids => q{DX Grid attivato alle $_[0]},
1487 gridu => q{DX Grid disattivato alle $_[0]},
1488 illcall => q{Spiacente, $_[0] non e' un nominativo valido},
1489 hasha => q{$_[0] già esiste $_[1]},
1490 hashb => q{$_[0] aggiunto a $_[1]},
1491 hashc => q{$_[0] rimosso da $_[1]},
1492 hashd => q{$_[0] non in $_[1]'},
1493 hashe => q{$_[0] impostato a $_[1]'},
1494 helpe1 => q{Aiuto non disponibile, contatta il sysop},
1495 helpe2 => q{Nessun aiuto per $_[0]},
1496 heres => q{Here abilitato per $_[0]},
1497 heade1 => q{Sto usando le coordinate $main::mycall, e' preferibile impostarle con set/location o set/qra},
1498 hereu => q{Here disattivato per $_[0]},
1499 homebbs => q{Home BBS impostata a: $_[0]},
1500 homenode => q{Home Node impostato a: $_[0]},
1501 hnodee1 => q{Per piacere imposta il tuo Home Node con set/homenode <nominativo_cluster>},
1502 hnodee2 => q{Impostazione dell'homenode fallita per $_[0]},
1503 hnode => q{Il tuo Homenode e' adesso "$_[0]"},
1504 init1 => q{inizializzaione inviata a $_[0]},
1505 iso => q{$_[0] Isolato},
1506 isou => q{$_[0] non Isolato},
1507 isoc => q{$_[0] creato ed isolato},
1508 isoari => q{c'e' una filtro sulla rotta in ingresso per $_[0]; eliminala con clear/route input $_[0] prima},
1509 isoaro => q{c'e' una filtro sulla rotta in uscita per $_[0]; eliminala con clear/route $_[0] prima},
1510 isow => q{$_[0] e' isolato; unset/isolate $_[0] prima},
1511 l1 => q{Spiacente $_[0], sei già collegato sun un altro canale},
1512 l2 => q{Benvenuto $_[0] sul Cluster $main::mycall a $main::myqth\nsoftware in uso DXSpider V$main::version build $main::build},
1513 lang => q{La lingua selezionata e' adesso Italiano},
1514 lange1 => q{set/language <lingua> dove <lingua> e' una tra ($_[0])},
1515 lange2 => q{impostazione lingua fallita per $_[0]'},
1516 lh1 => q{$main::data/hop_table.pl non esiste},
1517 loce1 => q{Per piacere inserisci la tua posizione, set/location <latitudine longitudine>},
1518 loce2 => q{Non riconosco "$_[0]" come Lat/Long (es 52 20 N 0 16 E)},
1519 loce3 => q{$_[0] e' una locatore QRA, usa: set/qra $_[0]},
1520 loc => q{I tuoi dati Lat/Long sono ora "$_[0]"},
1521 lockout => q{$_[0] Bloccato},
1522 lockoutc => q{$_[0] Creato e bloccato},
1523 lockoutun => q{$_[0] Sbloccato},
1524 lockoutuse => q{sintassi: sh/lockout <nominativo>|ALL},
1525 loginu => q{L'utente $_[0] e' entrato nel cluster},
1526 logoutu => q{L'utente $_[0] e' uscito dal cluster},
1527 loginn => q{Il nodo $_[0] si e' connesso},
1528 logoutn => q{Il nodo $_[0] si e' disconnesso},
1529 m1 => q{Inserisci il Soggetto (30 caratteri):},
1530 m2 => q{Copia del messaggio $_[0] spedita a $_[1]},
1531 m3 => q{Spiacente, $_[0] non e' un destinatario accettabile},
1532 m4 => q{Spiacente, non posso accedere al messaggio $_[0]},
1533 m5 => q{Spiacente, ho bisogno del numero di un messaggio'},
1534 m6 => q{Rispondi a: $_[0]},
1535 m7 => q{Soggetto : $_[0]},
1536 m8 => q{Scrivi il messaggio e batti /EX per spedirlo o /ABORT per uscire},
1537 m9 => q{Nuovi messaggi sono arrivati per te},
1538 m10 => q{Messaggio abortito},
1539 m11 => q{Il messaggio $_[0] e' stato salvato e inviato a $_[1]},
1540 m12 => q{Il messaggio $_[0] e' stato cancellato},
1541 m13 => q{Il messaggio $_[0] non esiste},
1542 m14 => q{Il messaggio $_[0] e' stato marcato come spedito a $_[1]},
1543 m15 => q{Il messaggio $_[0] risolta ora non spedito a $_[1]},
1544 m16 => q{Specificare il numero del messaggio},
1545 m17 => q{Spiacente, impossibile spedire messaggi in modo $_[0]},
1546 msg1 => q{Bollettino messo in coda},
1547 msg2 => q{Messaggio messo in coda},
1548 msg3 => q{Msg $_[0]: $_[1] cambiato da $_[2] a $_[3]},
1549 msgu => q{sintassi: msg <comando> <num_mess> dati...},
1550 merge1 => q{Richiesta di merge per gli spot $_[1] e i WWV $_[2] spedita a $_[0]},
1551 moon => q{Localita gg/mm/aaaa Alba Tramonto},
1552 moon_with_azel => q{Località gg/mm/aaaa Alba Tramonto Azim Elev},
1553 mond => q{Monitor disabilitato},
1554 mone => q{Monitor abilitato},
1555 namee1 => q{Per favore inserisci con set/name <nome>},
1556 namee2 => q{Impossibile trovare l'utente $_[0]!},
1557 name => q{Il tuo nome ora e' "$_[0]"},
1558 nodea => q{$_[0] impostato come nodo stile AK1A},
1559 nodeac => q{$_[0] creato come nodo stile AK1A},
1560 nodeb => q{$_[0] impostato come BBS},
1561 nodebc => q{$_[0] creato come BBS},
1562 nodec => q{$_[0] impostato come nodo stile CLX},
1563 nodecc => q{$_[0] creato come nodo stile CLX},
1564 noder => q{$_[0] impostato come nodo stile AR-Cluster},
1565 noderc => q{$_[0] creato come nodo stile AR-Cluster},
1566 nodes => q{$_[0] impostato come nodo stile DXSpider},
1567 nodesc => q{$_[0] creato come nodo stile DXSpider},
1568 nodex => q{$_[0] impostato come nodo stile DXNET},
1569 nodexc => q{$_[0] creato come nodo stile DXNET},
1570 nodeu => q{$_[0] impostato come utente},
1571 nodee1 => q{Non puoi utilizzare questo comando mentre il destinatario ($_[0]) e' connesso},
1572 notdone => q{Non eseguito},
1573 nothere => q{Spiacente, ma $_[0] non e' presente al momento, prova più tardi'},
1574 obscount => q{Contatore di obsolescenza del ping per $_[0] impostato a $_[1]},
1575 ok => q{Operazione eseguita con successo},
1576 outconn => q{Connessione in corso per $_[0]},
1577 page => q{Premi Invio per continuare, A per annullare ($_[0] linee) >},
1578 pagelth => q{La lunghezza della pagina e' adesso $_[0]},
1579 passerr => q{sintassi: SET/PASS <password> <nominativo>},
1580 password => q{Password impostata o cambiata per $_[0]},
1581 passwordu => q{Password rimossa per $_[0]},
1582 pingo => q{Ping mandato a $_[0]},
1583 pingi => q{Ping ritornato da $_[0] $_[1] (media $_[2]) secondi},
1584 pinge1 => q{Non puoi far un ping su te stesso!},
1585 pingint => q{Intervallo di ping per $_[0] impostato a $_[1] secondi},
1586 'pos' => q{Dal nominativo: $_[0] Lat: $_[1] Long: $_[2]},
1587 priv => q{Privilegi cambiati per $_[0]},
1588 prs => q{Prompt impostato a "$_[0]"},
1589 pru => q{Prompt reimpostato al predefinito},
1590 prx => q{$main::mycall >},
1591 pw0 => q{Inserisci la vecchia password: },
1592 pw1 => q{Inserisci la nuova password: },
1593 pw2 => q{Reinserisci la nuova password: },
1594 pw3 => q{Password modificata},
1595 pw4 => q{Le password sono differenti, password NON cambiata},
1596 qll => q{Per favore inserisci la tua località con set/location o set/qra},
1597 qthe1 => q{Per favore inserisci il tuo QTH con set/qth <qth>},
1598 qth => q{Il tuo QTH e' adesso "$_[0]"},
1599 qrae1 => q{Per favore inserisci il tuo locatore QRA con set/qra <locatore> (es set/qra JM77GF)},
1600 qrashe1 => q{Please enter a QRA locator, eg sh/qra JO02LQ or sh/qra JO02LQ IO93NS},
1601 qrae2 => q{Non riconosco "$_[0]" come locatore QRA (es JM77GF)},
1602 qra => q{Il tuo locatore QRA e' adesso "$_[0]"},
1603 rcmdo => q{RCMD "$_[0]" spedito a $_[1]},
1604 rec => q{$_[0] records},
1605 read1 => q{Spiacente, non ci sono nuovi messaggi per te},
1606 read2 => q{Messaggio $_[0] non trovato},
1607 read3 => q{Messaggio $_[0] non disponibile},
1608 rec => q{$_[0] records},
1609 reg => q{$_[0] registrato},
1610 regc => q{$_[0] creato e registrato},
1611 reginac => q{La registrazione non e' attiva (set/var \$main::reqreg = 1 per attivarla)},
1612 regun => q{$_[0] deregistrato},
1613 route => q{$_[0] su $_[1] via $_[2]},
1614 sat1 => q{Tracking Table for $_[0] for the next $_[1] hours every $_[2] mins},
1615 sat2 => q{dd/mm UTC Lat Lon Alt Km Az El Dist Km},
1616 sat3 => q{Sintassi: SH/SAT <nome> [<ore> <intervallo>]},
1617 sat4 => q{Satelliti disponibili/Età dei Kepleriani (giorni):-},
1618 sat5 => q{serve nnnnn.AMSAT nel soggetto per caricare i kepleriani dal messaggio},
1619 satnf => q{Satellite $_[0] sconosciuto},
1620 satdisc => q{-----},
1621 sethop1 => q{sintassi: set/hops <nominativo> ann|spots|wwv|wcy <num di salti>},
1622 sethop2 => q{$_[0] salti impostai per $_[1]$_[2] per $_[3]'},
1623 sethop3 => q{Nessun salto impostato per $_[0]'},
1624 shutting => q{$main::mycall si sta arrestando...},
1625 sloc => q{Cluster lat $_[0] long $_[1], Non scordare di camberli nel file DXVars.pm},
1626 snode1 => q{Nodo Nominativo Ordine Versione},
1627 snode2 => q{$_[0] $_[1] $_[2]},
1628 snode3 => q{$_[0] Nominativo sconosciuto},
1629 sqra => q{Locatore QRA del Cluster$_[0], NON DIMENTICARE DI CAMBIARLO NEL TUO FILE DXVars.pm},
1630 sorry => q{Spiacente},
1631 spf1 => q{spoof: sto creando il nuovo utente $_[0]},
1632 stathf => q{Statistiche HF DX Spot, ultimi 31 giorni},
1633 stathft => q{Statistiche HF DX Spot, ultimi 31 giorni per DXCC $_[0]},
1634 statvhf => q{Statistiche VHF+ DX Spot, ultimi 31 giorni},
1635 statvhft => q{Statistiche VHF+ DX Spot, ultimi 31 days per DXCC $_[0]},
1636 statdx => q{Totale DX Spots degli ultimi 31 giorni},
1637 sun => q{Località gg/mm/aaaa Alba Tramonto},
1638 sun_with_azel => q{Località gg/mm/aaaa Alba Tramonto Azim Elev},
1640 suser1 => q{sintassi: nominatio campo_utente valore},
1641 suser2 => q{Utente $_[0] non trovato},
1642 suser3 => q{Il campo utente '$_[0]' era '$_[1]' ora e' impostao a '$_[2]'},
1643 suser4 => q{Il campo utente '$_[0]' non esiste},
1644 time1 => q{Ora locale: $_[0] $_[1], UTC $_[2]},
1645 time2 => q{$_[0] Ora (standard) locale: $_[1] ($_[2] ore)},
1646 time3 => q{$_[0] $_[1]},
1647 talks => q{Talk abilitato per $_[0]},
1648 talku => q{Talk disabilitato per $_[0]},
1649 talkend => q{Chiude il la conversazione con te},
1650 talkinst => q{Stai entrando nel modo conversazione, /EX per uscire, /<cmd> per eseguire un comando},
1651 talknh => q{Spiaente $_[0] non e' collegato al momento},
1652 talkprompt => q{Talk ($_[0])>},
1653 talkstart => q{Inizia una conversazione con te},
1654 unsethop1 => q{sintassi: unset/hops <nominativo> ann|spots|wwv|wcy},
1655 unsethop2 => q{salti eliminati su $_[1] per $_[0]},
1656 usernf => q{*** Record utente per $_[0] non trovato ***},
1657 wcy1 => q{$_[0] manca o e' fuori limite},
1658 wcy2 => q{WCY duplicato},
1659 wwv1 => q{$_[0] manca o e' fuori limite},
1660 wwv2 => q{WWV duplicato},
1661 wwvs => q{WWV abilitati per $_[0]},
1662 wwvu => q{WWV disabilitati per $_[0]},
1663 wxs => q{WX abilitati per $_[0]},
1664 wxu => q{WX disabilitati per $_[0]},
1668 addr => q{Adresa nastavena na: $_[0]},
1669 already => q{$_[0] je uz pripojen},
1670 anns => q{Ann je povolen pro $_[0]},
1671 annu => q{Ann je zakazan pro $_[0]},
1672 annts => q{AnnTalk je povolen pro $_[0]},
1673 anntu => q{AnnTalk je zakazan pro $_[0]},
1674 badnode1 => q{$_[0] je nyni zavadny nod},
1675 badnode2 => q{$_[0] je nyni bezvadny nod},
1676 badnode3 => q{Seznam zavadnych nodu:-},
1677 bbse1 => q{Prosim zadej svou BBS adresu, set/bbs <tva bbs adresa>},
1678 bbs => q{Tva BBS adresa je nyni "$_[0]"},
1679 beepoff => q{Zvuky jsou nyni vypnuty},
1680 beepon => q{Zvuky jsou nyni zapnuty},
1681 call1 => q{Vyhledani znacky pres $_[0]:},
1682 conother => q{Lituji $_[0], jses na me napojen na jinem portu},
1683 concluster => q{Lituji $_[0], jses uz napojen nekde jinde na clusteru (na $_[1])},
1684 conscript => q{nebyl spusten connect skript "$_[0]" nalezen v $main::root/connect},
1685 confail => q{pripojeni na $_[0] selhalo ($_[1])},
1686 constart => q{pripojeni na $_[0] bylo zahajeno},
1687 deluser => q{Uzivatel $_[0] byl smazan},
1688 db1 => q{Tato databaze se nachazi na $_[0]},
1689 db2 => q{Lituji, ale klic $_[0] nebyl nalezen v $_[1]},
1690 db3 => q{Lituji, ale databaze $_[0] se zde nenachazi},
1691 db4 => q{Lituji, databaze $_[0] na $_[1] neni momentalne online},
1692 db5 => q{Pripojuji vzdalenou databazi na $_[0]...cekej...},
1693 db6 => q{Databaze $_[0] uz existuje, nejprve ji smaz},
1694 db7 => q{Databaze $_[0] byla vytvorena pro vzdaleny nod $_[1]},
1695 db8 => q{Databaze $_[0] byla vytvorena lokalne},
1696 db9 => q{Databaze $_[0] byla smazana},
1697 db10 => q{$_[0] zaznamu bylo vlozeno do $_[1]},
1698 db11 => q{Posilam tvuj pozadavek do $_[0], prosim cekej...},
1699 dfreq1 => q{Neplatna freq $_[0], potrebuji napr 0/30000 nebo hf nebo hf/cw'},
1700 dir1 => q{Zadne zpravy nebyly nalezeny},
1701 disc1 => q{Odpojeno uzivatelem $_[0]},
1702 disc2 => q{Kanal $_[0] odpojen},
1703 disc3 => q{Zadny kanal, ale spojeni $_[0] zruseno},
1704 disc4 => q{Zadny kanal ani spojeni, ale $_[0] byl odpojen},
1706 dup => q{Lituji, toto je duplikat},
1707 dx1 => q{Frekvence $_[0] neni uvnitr pasma (viz show/band); pouziti: DX [BY call] freq call text},
1708 dx2 => q{Potrebuji znacku; pouziti: DX [BY call] freq call text},
1709 dx3 => q{Znacka nebo frekvence je neplatna},
1710 dxs => q{DX spoty jsou povoleny pro $_[0]},
1711 dxu => q{DX spoty jsou zakazany pro $_[0]},
1712 e1 => q{Neplatny prikaz},
1713 e2 => q{Chyba: $_[0]},
1714 e3 => q{$_[0]: $_[1] nebylo nalezeno},
1715 e4 => q{Potrebuji alespon prefix nebo znacku},
1716 e5 => q{Neni povoleno},
1717 e6 => q{*** Zadna stanice specifikovana ***},
1718 e7 => q{znacka $_[0] neni v clusteru viditelna},
1719 e8 => q{Potrebuji znacku a nejaky text},
1720 e9 => q{Potrebuji alespon nejaky text},
1721 e10 => q{Stanice $_[0] neni pripojena lokalne},
1722 e11 => q{Nemohu pouzit $main:mycall jako cil},
1723 e12 => q{Potrebuji znacku nodu},
1724 e13 => q{$_[0] neni nod},
1725 e14 => q{Prvni argument musi byt cislo vetsi nez 0},
1726 e15 => q{neplatny parametr "$_[0]"},
1727 e16 => q{Soubor "$_[0]" uz existuje},
1728 e17 => q{Prosim nepouzivej zde toto slovo: @_'},
1729 e18 => q{Nemohu se pripojit na $_[0] ($!)},
1730 e19 => q{neplatny znak v radku $_[0]},
1731 e20 => q{retezec $_0] nebyl rozpoznan},
1732 e21 => q{$_[0] neni cislo},
1733 e22 => q{$_[0] neni znacka},
1734 e23 => q{$_[0] neni v rozsahu (napr 0/30000)'},
1735 e24 => q{Lituji, pristup na internet neni povolen},
1736 e25 => q{Lituji, hodnota musi byt mezi $_[0] a $_[1]},
1737 e26 => q{Prilis mnoho chyb najednou, jsi odpojovan},
1738 e27 => q{$_[0] neni cislo nebo prefix'},
1739 e28 => q{Lituji, musis byt registrovan (SP $main::myalias k registraci)},
1740 e29 => q{Potrebuji heslo},
1741 e30 => q{Nemohu otevrit $_[0] $!},
1742 e31 => q{$_[0] neni uzivatel'},
1743 e32 => q{Potrebuji frazi},
1744 e33 => q{$_[0] neni pocet dnu nebo platne datum},
1746 echoon => q{Echo povoleno},
1747 echooff => q{Echo zakazano},
1748 echow => q{*Echo je momentalne zakazano, pouzij set/echo k povoleni},
1749 emaile1 => q{Prosim zadej svou e-mailovou adresu, set/email <tva emailova adresa>},
1750 emaila => q{Tva e-mailova adresa je nyni "$_[0]"},
1751 email => q{E-mailova adresa je nastavena na: $_[0]},
1752 export1 => q{pouziti: export <cislo zpravy> <soubor>},
1753 export2 => q{$_[3] hlasi chyby pri exportu zpravy $_[0] do $_[1] ($_[2])},
1754 export3 => q{$_[2 ] exportoval zpravu $_[0] to $_[1]},
1755 filter1 => q{Filtr $_[0] byl zmenen pro for $_[1]},
1756 filter2 => q{Neznamy prikaz filtru $_[0]},
1757 filter3 => q{Nejsou zadne definovane filtry pro $_[0]},
1758 filter4 => q{$_[0]$_[1] Filtr $_[2] smazan pro $_[3]},
1759 filter5 => q{potrebuji nejake prikazy filtru...},
1760 filter6 => q{$_[0]$_[1] Filtr pro $[2] nebyl nalezen},
1761 grids => q{QRA ctverec byl povolen pro $_[0]},
1762 gridu => q{QRA ctverec byl zakazan pro $_[0]},
1763 illcall => q{Lituji, $_[0] neni platna znacka},
1764 hasha => q{$_[0] uz existuje v $_[1]},
1765 hashb => q{$_[0] byl pridan do $_[1]},
1766 hashc => q{$_[0] byl odstranen z $_[1]},
1767 hashd => q{$_[0] neni v $_[1]'},
1768 hashe => q{$_[0] byl nastaven v $_[1]'},
1769 helpe1 => q{Systemova napoveda neni k dispozici, informuj sysopa},
1770 helpe2 => q{Napoveda neni k dispozici k $_[0]},
1771 heres => q{$_[0] je pritomen},
1772 heade1 => q{S pouzitim souradnic clusteru, doporucuji zadat set/location nebo set/qra},
1773 hereu => q{$_[0] neni pritomen},
1774 homebbs => q{Domaci BBS je nastavena na: $_[0]},
1775 homenode => q{Domaci DXC nod je nastaven na: $_[0]},
1776 hnodee1 => q{Prosim zadej svuj domaci DXC nod, set/homenode <tvuj domaci DX cluster>},
1777 hnodee2 => q{Nastaveni domaciho nodu na $_[0] selhalo},
1778 hnode => q{Tvuj domaci nod je nyni "$_[0]"},
1779 init1 => q{vyslana inicializacni zprava do $_[0]},
1780 iso => q{$_[0] izolovan},
1781 isou => q{$_[0] neni izolovan},
1782 isoc => q{$_[0] vytvoren a izolovan},
1783 isoari => q{vstupni route filtr pro $_[0] uz existuje; zadej nejprve clear/route input $_[0]},
1784 isoaro => q{vystupni route filtr pro $_[0] uz existuje; zadej nejprve clear/route $_[0]},
1785 isow => q{$_[0] je izolovan; zadej nejprve unset/isolate $_[0]},
1786 l1 => q{Lituji $_[0], uz jsi zalogovan na jinem kanalu},
1787 l2 => q{Ahoj $_[0], toto je $main::mycall, $main::myqth\npouzivajici DXSpider V$main::version build $main::build},
1788 lang => q{Jazyk je nyni nastaven na Cestinu (napoveda zatim v procesu)},
1789 lange1 => q{set/language <lang> kde <lang> je jedno z ($_[0])},
1790 lange2 => q{selhalo nastaveni jazyka na $_[0]'},
1791 lh1 => q{$main::data/hop_table.pl neexistuje},
1792 loce1 => q{Prosim zadej svou polohu, set/location <sirka delka>},
1793 loce2 => q{Nemohu rozpoznat "$_[0]" jako sirka/delka (napr 52 20 N 0 16 E)},
1794 loce3 => q{$_[0] je QRA lokator, prosim pouzij: set/qra $_[0]},
1795 loc => q{Tva poloha (sirka/delka) je nyni "$_[0]"},
1796 lockout => q{$_[0] zamknuto},
1797 lockoutc => q{$_[0] vytvoreno a zamknuto},
1798 lockoutun => q{$_[0] Odemceno},
1799 lockoutuse => q{pouziti: sh/lockout <znacka>|ALL},
1800 loginu => q{Uzivatel $_[0] prihlasen},
1801 logoutu => q{Uzivatel $_[0] odhlasen},
1802 loginn => q{Nod $_[0] prihlasen},
1803 logoutn => q{Nod $_[0] odhlasen},
1804 m1 => q{Zadej nazev (30 znaku):},
1805 m2 => q{Kopie zpravy $_[0] byla odeslana k $_[1]},
1806 m3 => q{Lituji, $_[0] je neplatna cilova adresa},
1807 m4 => q{Lituji, zprava $_[0] neni dostupna},
1808 m5 => q{Lituji, potrebuji cislo zpravy'},
1809 m6 => q{Odpoved na: $_[0]},
1810 m7 => q{Nezev: $_[0]},
1811 m8 => q{Zadej text zpravy /EX pro konec nebo /ABORT k preruseni},
1812 m9 => q{Mas novou zpravu},
1813 m10 => q{Zprava prerusena},
1814 m11 => q{Zprava c. $_[0] ulozena a smerovana na $_[1]},
1815 m12 => q{Zprava c. $_[0] byla smazana},
1816 m13 => q{Zprava c. $_[0] chybi},
1817 m14 => q{Zprava c. $_[0] byla oznacena a zaslana do $_[1]},
1818 m15 => q{Zprava c. $_[0] byla neoznacena a zaslana do $_[1]},
1819 m16 => q{Potrebuji cislo zpravy},
1820 m17 => q{Lituji, nemohu posilat zpravy v modu $_[0]},
1821 m18 => q{Lituji, zprava $_[0] ma momentalne status KEEP},
1822 msg1 => q{Zpravy v rubrikach cekaji ve fronte},
1823 msg2 => q{Privatni zpravy cekaji ve fronte},
1824 msg3 => q{Zprava $_[0]: $_[1] byla zmenena z $_[2] na $_[3]},
1825 msgu => q{pouziti: msg <prikaz> <cislo zpravu> data...},
1826 merge1 => q{Pozadavek na Merge pro $_[1] spotu a $_[2] WWV byl zaslan do $_[0]},
1827 moon => q{Poloha dd/mm/yyyy Vychod Zapad},
1828 moon_with_azel => q{Poloha dd/mm/yyyy Vychod Zapad Azim Elev},
1829 mond => q{Monitoring je zakazan},
1830 mone => q{Monitoring je povolen},
1831 namee1 => q{Prosim zadej sve jmeno, set/name <tve jmeno>},
1832 namee2 => q{Nemohu najit uzivatele $_[0]!},
1833 name => q{Tve jmeno je nyni "$_[0]"},
1834 nodea => q{$_[0] nastaven jako nod typu AK1A},
1835 nodeac => q{$_[0] vytvoren jako nod typu AK1A},
1836 nodeb => q{$_[0] nastaven jako BBS},
1837 nodebc => q{$_[0] vytvoren jako BBS},
1838 nodec => q{$_[0] nastaven jako nod typu CLX},
1839 nodecc => q{$_[0] vytvoren jako nod typu CLX},
1840 noder => q{$_[0] nastaven jako nod typu AR-Cluster},
1841 noderc => q{$_[0] vytvoren jako nod typu AR-Cluster},
1842 nodes => q{$_[0] nastaven jako nod typu DXSpider},
1843 nodesc => q{$_[0] vytvoren jako nod typu DXSpider},
1844 nodex => q{$_[0] nastaven jako nod typu DXNET},
1845 nodexc => q{$_[0] vytvoren jako nod typu DXNET},
1846 nodeu => q{$_[0] nastaven opet jako uzivatel},
1847 nodee1 => q{Nemuzes pouzit tento prikaz zatimco tvuj cil ($_[0]) je on-line},
1848 notdone => q{NEBYLO provedeno},
1849 nothere => q{Lituji, ale $_[0] neni momentalne zde, zkus to pozdeji'},
1850 obscount => q{Pocatecni hodnota Ping citace nodu $_[0] byla nastavena na $_[1]},
1851 ok => q{Operace byla uspesna},
1852 outconn => q{Zbyvajici spojeni na $_[0]},
1853 page => q{Stiskni Enter pro pokracovani, A k preruseni ($_[0] radku) >},
1854 pagelth => q{Delka stranky je nyni $_[0]},
1855 passerr => q{Prosim pouzij: SET/PASS <heslo> <znacka>},
1856 passphrase => q{Fraze byla nastavena nebo zmenena pro $_[0]},
1857 passphraseu => q{Fraze byla odstranena pro $_[0]},
1858 password => q{Heslo bylo nastaveno nebo zmeneno pro $_[0]},
1859 passwordu => q{Heslo bylo odstraneno pro $_[0]},
1860 pc90s => q{PC90 bylo povoleno pro $_[0]},
1861 pc90u => q{PC90 bylo zakazano $_[0]},
1862 pingo => q{Ping byl zaslan na $_[0]},
1863 pingi => q{Ping se vratil od $_[0] $_[1] (Prum $_[2]) sekundy},
1864 pinge1 => q{Nemuzu pingnout sam sebe!},
1865 pingint => q{Ping interval na $_[0] byl nastaven na $_[1] sekundy},
1866 'pos' => q{Od znacky: $_[0] Sirka: $_[1] Delka: $_[2]},
1867 pr2 => q{($_[0]) de $main::mycall $_[1] $_[2] >},
1868 prs => q{Prompt byl nastaven na "$_[0]"},
1869 pru => q{Prompt byl vracen na default},
1870 priv => q{Uroven prav byla zmenena na $_[0]},
1871 prx => q{$main::mycall >},
1872 pw0 => q{Zadej stare heslo: },
1873 pw1 => q{Zadej nove heslo: },
1874 pw2 => q{Zadej znovu nove heslo: },
1875 pw3 => q{Heslo bylo zmeneno},
1876 pw4 => q{Hesla se lisi, heslo NEBYLO zmeneno},
1877 qll => q{Prpsim zadej svou polohu s pomoci set/location nebo set/qra},
1878 qthe1 => q{Prosim zadej sve QTH, set/qth <tve QTH>},
1879 qth => q{Tve QTH je nyni "$_[0]"},
1880 qrae1 => q{Prosim zadej svuj QRA lokator, set/qra <qra lokator> (napr set/qra JN79FM)},
1881 qrashe1 => q{Prosim zadej QRA locator, napr sh/qra JN79FM nebo sh/qra JN79FM JN63GV},
1882 qrae2 => q{Nerozpoznal jsem "$_[0]" jako QRA lokator (napr JN79FM)},
1883 qra => q{Tvuj QRA lokator je nyni "$_[0]"},
1884 rcmdo => q{RCMD "$_[0]" bylo zaslano do $_[1]},
1885 read1 => q{Lituji, nemas zadne nove zpravy},
1886 read2 => q{Zprava $_[0] nenalezena},
1887 read3 => q{Msg $_[0] neni k dispozici},
1888 rec => q{$_[0] zaznamu},
1889 reg => q{$_[0] registrovano},
1890 regc => q{$_[0] vytvoreno a registrovano},
1891 reginac => q{Registrace neni aktivni (set/var \$main::reqreg = 1 k aktivaci)},
1892 regun => q{$_[0] neregistrovano},
1893 route => q{$_[0] na $_[1] via $_[2]},
1894 sat1 => q{Tabulka pro $_[0] pro nasledujicich $_[1] hodin s intervalem $_[2] min},
1895 sat2 => q{dd/mm UTC Lat Lon Alt Km Az El Vzdal Km},
1896 sat3 => q{Syntaxe: SH/SAT <jmeno> [<hodin> <interval>]},
1897 sat4 => q{Druzice k dispozici/Stari Kepl. elem (dny):-},
1898 sat5 => q{potrebuji nnnnn.AMSAT v nazvu ke stazeni keps z teto zpravy},
1899 satnf => q{Druzice $_[0] je neznama},
1900 satdisc => q{-----},
1901 set => q{$_[0] povoleno pro $_[1]},
1902 sethop1 => q{pouziti: set/hops <znacka> ann|spots|wwv|wcy <pocet skoku>},
1903 sethop2 => q{$_[0] skoku nastaveno na $_[1]$_[2] pro $_[3]'},
1904 sethop3 => q{Zadny pocet skoku nastaven pro $_[0]'},
1905 shu => q{"SHU" nestaci, je treba alespon "SHUT" k vypnuti nodu},
1906 shutting => q{$main::mycall se vypina...},
1907 sloc => q{Cluster lat $_[0] long $_[1], NEZAPOMEN ZMENIT DXVars.pm},
1908 snode1 => q{Nod Znacka Typ Verze },
1909 snode2 => q{$_[0] $_[1] $_[2]},
1910 snode3 => q{$_[0] Neznama znacka},
1911 sqra => q{Cluster QRA Lokator$_[0], NEZAPOMEN ZMENIT DXVars.pm},
1913 spf1 => q{spoof: vytvarim noveho uzivatele $_[0]},
1914 stathf => q{HF DX Spot Stats, poslednich $_[1] dni pocinaje $_[0]},
1915 stathft => q{HF DX Spot Stats, poslednich $_[2] dni pocinaje $_[1] pro DXCC $_[0]},
1916 statvhf => q{VHF+ DX Spot Stats, poslednich $_[1] dni pocinaje $_[0]},
1917 statvhft => q{VHF+ DX Spot Stats, poslednich $_[2] dni pocinaje $_[1] pro DXCC $_[0]},
1918 statdx => q{Prehled DX Spotu pro $_[1] dni pocinaje $_[0]},
1919 sun => q{Poloha dd/mm/yyyy Vychod Zapad},
1920 sun_with_azel => q{Poloha dd/mm/yyyy Vychod Zapad Azim Elev},
1921 susdb1 => q{pouziti: znacka stat mesto},
1922 susdb2 => q{USDB $_[0] bylo $_[1], $_[2]},
1923 susdb3 => q{USDB $_[0] je nyni $_[1], $_[2]},
1924 susdb4 => q{USDB $_[0] smazano},
1925 suser1 => q{pouziti: znacka jmeno_uzivatele hodnota},
1926 suser2 => q{User $_[0] nebylo nalezeno},
1927 suser3 => q{User field '$_[0]' bylo '$_[1]' nyni nastaveno na '$_[2]'},
1928 suser4 => q{Jmeno uzivatele '$_[0]' neexistuje},
1929 time1 => q{Lokalni cas: $_[0] $_[1], UTC $_[2]},
1930 time2 => q{$_[0] Lokalni (standardni) cas: $_[1] ($_[2] hodin)},
1931 time3 => q{$_[0] $_[1]},
1932 talks => q{Talk povolen pro $_[0]},
1933 talku => q{Talk zakazan pro $_[0]},
1934 talkend => q{Skoncil spolecnou konverzaci},
1935 talkinst => q{Vstupuji do konverzacniho modu, /EX pro skonceni, /<paikaz> ke spusteni prikazu},
1936 talknh => q{Lituji, $_[0] neni momentalne online},
1937 talkprompt => q{Talk ($_[0])>},
1938 talkstart => q{Zahajil spolecnou konverzaci},
1939 unset => q{$_[0] zakazano pro for $_[1]},
1940 unsethop1 => q{pouziti: unset/hops <znacka> ann|spots|wwv|wcy},
1941 unsethop2 => q{pocet skoku neni nastaven na $_[1] pro $_[0]'},
1942 usernf => q{*** Uzivatelsky zaznam pro $_[0] nebyl nalezen ***},
1943 wcy1 => q{$_[0] bud chybi nebo je mimo rozsah},
1944 wcy2 => q{Duplicitni WCY},
1945 wcys => q{WCY je povoleno pro $_[0]},
1946 wcyu => q{WCY je zakazano pro $_[0]},
1947 wwv1 => q{$_[0] bud chybi nebo je mimo rozsah},
1948 wwv2 => q{Duplicitni WWV},
1949 wwvs => q{WWV je povoleno pro $_[0]},
1950 wwvu => q{WWV je zakazano pro $_[0]},
1951 wxs => q{WX je povoleno pro $_[0]},
1952 wxu => q{WX je zakazano pro $_[0]},
1956 addr => q{Endereo definido para: $_[0]},
1957 already => q{$_[0] J ligado},
1958 anns => q{Anncios activado para $_[0]},
1959 annu => q{Anncios desactivado para $_[0]},
1960 annts => q{AnnTalk activado para $_[0]},
1961 anntu => q{AnnTalk desactivado para $_[0]},
1962 badnode1 => q{$_[0] agora um node mau},
1963 badnode2 => q{$_[0] agora um bom node},
1964 badnode3 => q{Lista dos maus nodes:-},
1965 bbse1 => q{Por favor escreva qual a sua BBS local,, set/bbs <a sua bbs local>},
1966 bbs => q{A sua bbs local agora "$_[0]"},
1967 beepoff => q{A campainha est desligada agora},
1968 beepon => q{A campainha est ligada agora},
1969 call1 => q{Indicativo fechado via $_[0]:},
1970 conother => q{Desculpe $_[0] voc est ligado a mim noutra porta},
1971 concluster => q{Desculpe $_[0] voc j est ligado em algum sitio no cluster (on $_[1])},
1972 conscript => q{nenhum script de ligao chamado "$_[0]" encontrado em $main::root/connect},
1973 confail => q{ligao para $_[0] falhada ($_[1])},
1974 constart => q{ligao para $_[0] comeada},
1975 deluser => q{User $_[0] foi apagado},
1976 db1 => q{Esta base de dados est localizada em $_[0]},
1977 db2 => q{Desculpe, mas a tecla: $_[0] no foi encontrada em $_[1]},
1978 db3 => q{Desculpe, base de dados $_[0] no\ existe aqui},
1979 db4 => q{Desculp, base de dados $_[0] localizada em $_[1] no\ est actualmente acessivel},
1980 db5 => q{Acedendo a base da dados remota em $_[0]...espere...},
1981 db6 => q{Base de dados $_[0] j existe, apague-a primeiro},
1982 db7 => q{Base de dados $_[0] criada para um node remoto $_[1]},
1983 db8 => q{Base de dados $_[0] criada localmente},
1984 db9 => q{Base de dados $_[0] removida},
1985 db10 => q{$_[0] registos importados para $_[1]},
1986 db11 => q{Enviando o(s) seu(s) pedido(s) para $_[0], por favor espere...},
1987 dfreq1 => q{Freq invlida $_[0] precisa: ex 0/30000 ou hf ou hf/cw'},
1988 dir1 => q{Nenhumas mensagens encontradas},
1989 disc1 => q{Desligado por $_[0]},
1990 disc2 => q{Canal $_[0] desligado},
1991 disc3 => q{Nenhum canal, mas ligao $_[0] desfeita},
1992 disc4 => q{Nenhum canal ou ligao mas orfo $_[0] desligado},
1994 dup => q{Desculpe, isto um duplicado},
1995 dx1 => q{Frequencia $_[0] no em banda (veja show/band); uso: DX [de indicativo] freq call comentrios},
1996 dx2 => q{Preciso de um indicativo; uso: DX [de indicativo] freq call comentrios},
1997 dx3 => q{O indicativo ou frequncia est invlido},
1998 dxcqs => q{DX CQ Zonas activado para $_[0]},
1999 dxcqu => q{DX CQ Zonas desactivada para $_[0]},
2000 dxitus => q{DX ITU Zonas activado para $_[0]},
2001 dxituu => q{DX ITU Zonas desactivada para $_[0]},
2002 dxs => q{DX Spots activado para $_[0]},
2003 dxu => q{DX Spots desactivado $_[0]},
2004 e1 => q{Comando invlido},
2005 e2 => q{Erro: $_[0]},
2006 e3 => q{$_[0]: $_[1] no encontrado},
2007 e4 => q{Preciso de pelo menos dum prefixo ou indicativo},
2008 e5 => q{No permitido},
2009 e6 => q{*** Nenhuma estao especificada ***},
2010 e7 => q{indicativo $_[0] no visivel no cluster},
2011 e8 => q{Preciso de um indicativo e algum texto},
2012 e9 => q{Preciso de pelo menos dalgum texto},
2013 e10 => q{$_[0] no est ligado localmente},
2014 e11 => q{No pode usar $main:mycall como alvo},
2015 e12 => q{Preciso de um indicativo de node},
2016 e13 => q{$_[0] no um node},
2017 e14 => q{O primeiro argumento deve ser numrico e > 0},
2018 e15 => q{qualificador invlido "$_[0]"},
2019 e16 => q{O ficheiro "$_[0]" existe},
2020 e17 => q{Por favor no use as palavras: @_ aqui'},
2021 e18 => q{No posso ligar a $_[0] ($!)},
2022 e19 => q{Caracter invlido na linha $_[0]},
2023 e20 => q{sinal $_[0] no reconhecido},
2024 e21 => q{$_[0] no numrico},
2025 e22 => q{$_[0] no um indicativo},
2026 e23 => q{$_[0] no um intervalo (ex 0/30000)'},
2027 e24 => q{Desculpe, acesso internet no est activado},
2028 e25 => q{Desculpe o valor deve estar entre $_[0] e $_[1]},
2029 e26 => q{Muitos erros concurrenciais, voc vai ser desligado},
2030 e27 => q{$_[0] no um nmero ou um prefixo de um indicativo'},
2031 e28 => q{Desculpe, voc precisa ser registado (SP $main::myalias para registrar)},
2032 e29 => q{Preciso de uma password},
2033 e30 => q{No posso abrir $_[0] $!},
2034 e31 => q{$_[0] no um usurio'},
2035 e32 => q{Preciso de uma passphrase},
2036 e33 => q{$_[0] no um nmero de dias ou uma data vlida},
2037 e34 => q{Preciso de um GRUPO e algum texto},
2038 e35 => q{Voc no um membro de $_[0], junte $_[0]},
2040 echoon => q{Eco activado},
2041 echooff => q{Eco desactivado},
2042 echow => q{*O eco est actualmente desactivado, escreva set/echo para activar},
2043 emaile1 => q{Por favor escreva o seu email, faa set/email <seu email>},
2044 emaila => q{O seu email agora "$_[0]"},
2045 email => q{Email definido para: $_[0]},
2046 export1 => q{uso: export <msgno> <nome de ficheiro>},
2047 export2 => q{$_[3] houve um erro ao exportar a msg $_[0] para $_[1] ($_[2])},
2048 export3 => q{$_[2 ] msg $_[0] exportada para $_[1]},
2049 filter1 => q{Filtro $_[0] actualizado para $_[1]},
2050 filter2 => q{Filtro de palavra chave $_[0] desconhecido},
2051 filter3 => q{Nenhuns filtros definidos para $_[0]},
2052 filter4 => q{$_[0]$_[1] Filtro $_[2] apagado para $_[3]},
2053 filter5 => q{preciso de alguns comandos de filtro...},
2054 filter6 => q{$_[0]$_[1] Filtro para $[2] no encontrado},
2055 grids => q{Grelha de DX activado para $_[0]},
2056 gridu => q{Grelha de DX desactivado para $_[0]},
2057 illcall => q{Desculpe, $_[0] um indicativo invlido},
2058 hasha => q{$_[0] j existe em $_[1]},
2059 hashb => q{$_[0] adicionado para $_[1]},
2060 hashc => q{$_[0] removido de $_[1]},
2061 hashd => q{$_[0] no em $_[1]'},
2062 hashe => q{$_[0] definido em $_[1]'},
2063 helpe1 => q{Sistema de ajuda no disponivel, diga ao sysop},
2064 helpe2 => q{Nenhuma ajuda disponivel em $_[0]},
2065 heres => q{Aqui definido em $_[0]},
2066 heade1 => q{Usando $main::mycall coords, considere fazer um set/location ou set/qra},
2067 hereu => q{Aqui no definido em $_[0]},
2068 homebbs => q{BBS local definida como: $_[0]},
2069 homenode => q{Node local definido como: $_[0]},
2070 hnodee1 => q{Por favor escreva o seu node local, set/homenode <o seu DX Cluster>},
2071 hnodee2 => q{Falha ao definir o node local em $_[0]},
2072 hnode => q{O seu node local agora "$_[0]"},
2073 init1 => q{enviar mensagem de inicializao para $_[0]},
2074 iso => q{$_[0] Isolado},
2075 isou => q{$_[0] No isolado},
2076 isoc => q{$_[0] criado e isolado},
2077 isoari => q{h um filtro de rota entrado para $_[0]; clear/route input $_[0] primeiro},
2078 isoaro => q{h um filtro de rota saido para $_[0]; clear/route $_[0] primeiro},
2079 isow => q{$_[0] est isolado; unset/isolate $_[0] primeiro},
2080 join => q{a juntar ao grupo $_[0]},
2081 l1 => q{Desculpe $_[0], voc est ligado noutro canal},
2082 l2 => q{Ol $_[0], isto $main::mycall em $main::myqth\nrunning DXSpider V$main::version build $main::build},
2083 lang => q{Linguagem agora o Portugus},
2084 lange1 => q{set/language <ling> aonde <ling> uma de ($_[0])},
2085 lange2 => q{falha ao definir uma lngua em $_[0]'},
2086 leave => q{a deixar o grupo $_[0]},
2087 lh1 => q{$main::data/hop_table.pl no existe},
2088 loce1 => q{Por favor diga as suas coordenadas,, set/location <latitude longitude>},
2089 loce2 => q{No reconhece "$_[0]" como uma Lat/Long (ex 52 20 N 0 16 E)},
2090 loce3 => q{$_[0] um locator, por favor use: set/qra $_[0]},
2091 loc => q{A sua lat/long agora "$_[0]"},
2092 lockout => q{$_[0] Fechado},
2093 lockoutc => q{$_[0] Criado e fechado},
2094 lockoutun => q{$_[0] Aberto},
2095 lockoutuse => q{uso: sh/lockout <call>|ALL},
2096 loginu => q{Usurio $_[0] ligou},
2097 logoutu => q{Usurio $_[0] desligou-se},
2098 loginn => q{Node $_[0] ligou},
2099 logoutn => q{Node $_[0] desligou},
2100 m1 => q{Escrever o ttulo (30 caracteres):},
2101 m2 => q{Cpia da msg $_[0] enviada para $_[1]},
2102 m3 => q{Desculpe, $_[0] o endereo inaceitvel},
2103 m4 => q{Desculpe, no pode aceder mensagem $_[0]},
2104 m5 => q{Desculpe, eu preciso do nmero da mensagem'},
2105 m6 => q{Responder a: $_[0]},
2106 m7 => q{Ttulo : $_[0]},
2107 m8 => q{Escrever a mensagem /EX para enviar ou /ABORT para sair},
2108 m9 => q{Uma nova mensagem chegou para si},
2109 m10 => q{Mensagem abortada},
2110 m11 => q{Mensagem nmero $_[0] guardada e enviada para $_[1]},
2111 m12 => q{Mensagem nmero $_[0] apagada},
2112 m13 => q{Mensagem nmero $_[0] desaparecida},
2113 m14 => q{Mensagem nmero $_[0] marcada como enviada para $_[1]},
2114 m15 => q{Mensagem nmero $_[0] desmarcada como enviada para $_[1]},
2115 m16 => q{Preciso do nmero da mensagem},
2116 m17 => q{Desculpe, no posso enviar mensagens no modo $_[0]},
2117 m18 => q{Desculpe, a mensagem $_[0] est actualmente definida como KEEP},
2118 msg1 => q{Filas das mensagens de boletins},
2119 msg2 => q{Filas das mensagens privadas},
2120 msg3 => q{Mensagem $_[0]: $_[1] alterada de $_[2] para $_[3]},
2121 msgu => q{uso: msg <cmd> <msgno> data...},
2122 merge1 => q{Submeter pedido para $_[1] spots e $_[2] WWV enviado para $_[0]},
2123 moon => q{Localizao dd/mm/yyyy Subir Definido},
2124 moon_with_azel => q{Localizao dd/mm/yyyy Subir Definido Azim Elev},
2125 mond => q{Monitorizao desactivada},
2126 mone => q{Monitorizao activada},
2127 namee1 => q{Por favor escreva o seu nome, set/name <o seu nome>},
2128 namee2 => q{No encontro o usurio $_[0]!},
2129 name => q{O seu nome "$_[0]"},
2130 nodea => q{$_[0] definido como um node tipo AK1A},
2131 nodeac => q{$_[0] criado como um node tipo AK1A},
2132 nodeb => q{$_[0] definido como BBS},
2133 nodebc => q{$_[0] criado como BBS},
2134 nodec => q{$_[0] definido como um node tipo CLX},
2135 nodecc => q{$_[0] criado como um node tipo CLX},
2136 noder => q{$_[0] definido como um node tipo AR-Cluster},
2137 noderc => q{$_[0] criado como um node tipo AR-Cluster},
2138 nodes => q{$_[0] definido como um node tipo DXSpider},
2139 nodesc => q{$_[0] criado como um node tipo DXSpider},
2140 nodex => q{$_[0] definido como um node tipo DXNET},
2141 nodexc => q{$_[0] criado como um node tipo DXNET},
2142 nodeu => q{$_[0] definido como um usurio},
2143 nodee1 => q{Voc no pode usar este comando enquanto o seu alvo ($_[0]) est ligado},
2144 notdone => q{No foi feito},
2145 nothere => q{Desculpe, mas $_[0] no est aqui de momento, por favor tente mais tarde'},
2146 obscount => q{Ping obsolescence conta como $_[0] definido para $_[1]},
2147 ok => q{Operao bem sucedida},
2148 outconn => q{Ligao exterior para $_[0]},
2149 page => q{Prima no Enter para continuar, A para abortar ($_[0] linhas) >},
2150 pagelth => q{O tamanho da pgina agora de $_[0]},
2151 passerr => q{Por favor use: SET/PASS <password> <indicativo>},
2152 passphrase => q{Passphrase definida ou alterada por $_[0]},
2153 passphraseu => q{Passphrase removida por $_[0]},
2154 password => q{Password definida ou alterada por $_[0]},
2155 passwordu => q{Password removida por $_[0]},
2156 pc90s => q{PC90 activado por $_[0]},
2157 pc90u => q{PC90 desactivado $_[0]},
2158 pingo => q{Ping comeou para $_[0]},
2159 pingi => q{Ping retornado de $_[0] $_[1] (Ave $_[2]) segundos},
2160 pinge1 => q{No pode fazer ping para si prprio!},
2161 pingint => q{Intervalo de Ping em $_[0] definido para $_[1] segundos},
2162 'pos' => q{Do indicativo: $_[0] Lat: $_[1] Long: $_[2]},
2163 prs => q{Prompt agora definida para "$_[0]"},
2164 pru => q{Prompt agora regressou para a default},
2165 priv => q{Nivel de privilgio alterado em $_[0]},
2166 prx => q{$main::mycall >},
2167 pw0 => q{Escreva a password antiga: },
2168 pw1 => q{Escreva a password nova: },
2169 pw2 => q{Escreva novamente a nova password: },
2170 pw3 => q{Password alterada},
2171 pw4 => q{As Passwordes diferem, a password NO foi alterada},
2172 qll => q{Por favor escreva a sua localizao com set/location ou set/qra},
2173 qthe1 => q{Por favor escreva o seu QTH, set/qth <o seu qth>},
2174 qth => q{O seu QTH "$_[0]"},
2175 qrae1 => q{Por favor escreva o seu locator, set/qra <locator> (ex set/qra IM58LP)},
2176 qrashe1 => q{Por favor escreva o seu locator, ex sh/qra IM58LP ou sh/qra IM58LP IO93NS},
2177 qrae2 => q{No reconhece "$_[0]" como um locator (ex IM58LP)},
2178 qra => q{O seu locator "$_[0]"},
2179 qsl1 => q{Call Manager Times Last Time Seen De},
2180 rcmdo => q{RCMD "$_[0]" enviado para $_[1]},
2181 read1 => q{Desculpe, nenhuma mensagem nova para voc},
2182 read2 => q{Msg $_[0] no foi encontrada},
2183 read3 => q{Msg $_[0] no est disponivel},
2184 rec => q{$_[0] registos},
2185 reg => q{$_[0] registados},
2186 regc => q{$_[0] criado e registado},
2187 reginac => q{O registo no est activo (set/var \$main::reqreg = 1 para activar)},
2188 regun => q{$_[0] no registado},
2189 route => q{$_[0] em $_[1] via $_[2]},
2190 sat1 => q{Tabela de rbitras para $_[0] para a prxima $_[1] horas em todos os $_[2] mins},
2191 sat2 => q{dd/mm UTC Lat Lon Alt Km Az El Dist Km},
2192 sat3 => q{Sintaxe: SH/SAT <nome> [<horas> <intervalo>]},
2193 sat4 => q{Satlites disponiveis/Idade das rbitras (dias):-},
2194 sat5 => q{preciso nnnnn.AMSAT no ttulo para carregar as rbitras desde esta mensagem},
2195 satnf => q{Satlite $_[0] desconhecido},
2196 satdisc => q{-----},
2197 set => q{$_[0] activado por $_[1]},
2198 sethop1 => q{uso: set/hops <indicativo> ann|spots|wwv|wcy <nmero de saltos>},
2199 sethop2 => q{$_[0] saltos definidos em $_[1]$_[2] por $_[3]'},
2200 sethop3 => q{Nenhuns saltos definidos por $_[0]'},
2201 shu => q{"SHU" no suficiente! voc precisa pelo menos de "SHUT" para desligar o node},
2202 shutting => q{$main::mycall a desligar...},
2203 sloc => q{Cluster lat $_[0] long $_[1], NO ESQUECER DE ALTERAR O SEU DXVars.pm},
2204 snode1 => q{Node Call Sort Verso},
2205 snode2 => q{$_[0] $_[1] $_[2]},
2206 snode3 => q{$_[0] indicativo desconhecido},
2207 sqra => q{Cluster locator$_[0], NO ESQUECER DE ALTERAR O SEU DXVars.pm},
2208 sorry => q{Desculpe},
2209 spf1 => q{spoof: criando um novo usurio $_[0]},
2210 stathf => q{HF DX Spot Stats, ltimo $_[1] dias de $_[0]},
2211 stathft => q{HF DX Spot Stats, ltimo $_[2] dias de $_[1] por DXCC $_[0]},
2212 statvhf => q{VHF+ DX Spot Stats, ltimo $_[1] dias de $_[0]},
2213 statvhft => q{VHF+ DX Spot Stats, ltimo $_[2] dias de $_[1] por DXCC $_[0]},
2214 statdx => q{Total DX Spots por $_[1] dias de $_[0]},
2215 sun => q{Localizao dd/mm/yyyy Subir Definido},
2216 sun_with_azel => q{Localizao dd/mm/yyyy Subir Definido Azim Elev},
2217 susdb1 => q{uso: indicativo da cidade do estado},
2218 susdb2 => q{USDB $_[0] foi $_[1], $_[2]},
2219 susdb3 => q{USDB $_[0] agora $_[1], $_[2]},
2220 susdb4 => q{USDB $_[0] apagado},
2221 suser1 => q{uso: indicativo valor user_field_name},
2222 suser2 => q{Usurio $_[0] no foi encontrado},
2223 suser3 => q{Campo do usurio '$_[0]' fooi '$_[1]' agora definido para '$_[2]'},
2224 suser4 => q{O campo de nome do usurio '$_[0]' no existe},
2225 time1 => q{Tempo local: $_[0] $_[1], UTC $_[2]},
2226 time2 => q{$_[0] Tempo local (standard): $_[1] ($_[2] Horas)},
2227 time3 => q{$_[0] $_[1]},
2228 talks => q{QSO activado por $_[0]},
2229 talku => q{QSO desactivado por $_[0]},
2230 talkend => q{Conversao acabada para si},
2231 talkinst => q{A entrar no mode de conversao, /EX para terminar, /<cmd> para correr como um comando},
2232 talknh => q{Desculpe $_[0] no est ligado de momento},
2233 talkprompt => q{Conversar ($_[0])>},
2234 talkstart => q{A comear a conversao para si},
2235 unset => q{$_[0] desactivado por $_[1]},
2236 unsethop1 => q{uso: unset/hops <indicativo> ann|spots|wwv|wcy},
2237 unsethop2 => q{saltos no definidos em $_[1] por $_[0]'},
2238 usernf => q{*** Registo de usurio por $_[0] no foi encontrado ***},
2239 usstates => q{Mostrar estados dos EUA activado por $_[0]},
2240 usstateu => q{Desactivar os estados dos EUA por $_[0]},
2241 wcy1 => q{$_[0] est desaparecido ou fora de alcance},
2242 wcy2 => q{WCY duplicado},
2243 wcys => q{WCY enabled for $_[0]},
2244 wcyu => q{WCY desactivado por $_[0]},
2245 wpc16s => q{Permite o PC16 de $_[0] activado},
2246 wpc16u => q{Permite o PC16 de $_[0] desactivado},
2247 wpc19s => q{Rota PC19 por $_[0] activado},
2248 wpc19u => q{Rota PC19 por $_[0] desactivado},
2249 wwv1 => q{$_[0] est desaparecido ou fora de alcance},
2250 wwv2 => q{WWV duplicado},
2251 wwvs => q{WWV activado por $_[0]},
2252 wwvu => q{WWV desactivado $_[0]},
2253 wxs => q{WX activado por $_[0]},
2254 wxu => q{WX desactivado por $_[0]},
projects / spider.git / blob